Above-ground biomass estimation using airborne discrete-return and full-waveform LiDAR data in a coniferous forest

The estimation of forest aboveground biomass (AGB) is critical for quantifying carbon stocks and essential for evaluating global carbon cycle. Many previous studies have estimated forest AGB using airborne discrete-return Light Detection and Ranging (LiDAR) data, while fewer studies predicted forest AGB using airborne full-waveform LiDAR data. The objective of this work was to evaluate the utility of airborne discrete-return and full-waveform LiDAR data in estimating forest AGB. To fulfill the objective, airborne discrete-return LiDAR-derived metrics (DR-metrics), full-waveform LiDAR-derived metrics (FW-metrics) and structure parameters (combining height metrics and canopy cover) were used to estimate forest AGB. Additionally, the combined use of DR- and FW-metrics through a nonlinear way was also evaluated for AGB estimation in a coniferous forest in Dayekou, Gansu province of China. Results indicated that both height metrics derived from discrete-return and full-waveform LiDAR data were stronger predictors of forest AGB compared with other LiDAR-derived metrics. Canopy cover derived from discrete-return LiDAR data was not sensitive to forest AGB, while canopy cover estimated by full-waveform LiDAR data (CC_WF) showed moderate correlation with forest AGB. Structure parameters derived from full-waveform LiDAR data, such as H75_FW * CC_FW, were closely related to forest AGB. In contrast, structure parameters derived from discrete-return LiDAR data were not suitable for estimating forest AGB due to the less sensitivity of canopy cover CC_DR2 to forest AGB. This research also concluded that the synergistic use of DR- and FW-metrics can provide better AGB estimates in coniferous forest.     

基于遥感的光合有效辐射吸收比率(FPAR) 估算方法综述

光合有效辐射吸收比率(FPAR)是反映植被生长过程的重要生理参数,是陆地生态系统模型的关键参数,是反映全球气候变化的重要因子。基于遥感的FPAR估算方法是获取区域乃至全球尺度FPAR的有效方法。目前,主要形成了植被指数法和机理法两类方法,植被指数法是建立FPAR与植被指数的经验统计模型,简单、计算效率高;机理法则从物理模型上进行FPAR的求解与反演,机理明晰、可行性强。然而,由于FPAR本身的复杂性以及环境因素、遥感数据质量的影响,导致了估算方法面临诸多不确定性问题。为了解决这些不确定性问题以及满足生态过程深入研究的需求,将进一步注重FPAR的机理研究、先验知识的获取与积累,构建长时间序列FPAR以及高时空的FPAR算法研究。     

Comparing canopy metrics derived from terrestrial and airborne laser scanning in a Douglas-fir dominated forest stand

Accurate estimates of vegetation structure are important for a large number of applications including ecological modeling and carbon budgets. Light detection and ranging (LiDAR) measures the three-dimensional structure of vegetation using laser beams. Most LiDAR applications today rely on airborne platforms for data acquisitions, which typically record between 1 and 5 “discrete” returns for each outgoing laser pulse. Although airborne LiDAR allows sampling of canopy characteristics at stand and landscape level scales, this method is largely insensitive to below canopy biomass, such as understorey and trunk volumes, as these elements are often occluded by the upper parts of the crown, especially in denser canopies. As a supplement to airborne laser scanning (ALS), a number of recent studies used terrestrial laser scanning (TLS) for the biomass estimation in spatially confined areas. One such instrument is the Echidna^® Validation Instrument (EVI), which is configured to fully digitize the returned energy of an emitted laser pulse to establish a complete profile of the observed vegetation elements. In this study we assess and compare a number of canopy metrics derived from airborne and TLS. Three different experiments were conducted using discrete return ALS data and discrete and full waveform observations derived from the EVI. Although considerable differences were found in the return distribution of both systems, ALS and TLS were both able to accurately determine canopy height (Δ height < 2.5 m) and the vertical distribution of foliage and leaf area (0.86 > r ² > 0.90, p < 0.01). When using more spatially explicit approaches for modeling the biomass and volume throughout the stands, the differences between ALS and TLS observations were more distinct; however, predictable patterns exist based on sensor position and configuration.     

Airborne LiDAR technique for estimating biomass components of maize: A case study in Zhangye City,Northwest China

Crop biomass is an important ecological indicator of growth, light use efficiency, and carbon stocks in agro-ecosystems. Light detection and ranging (LiDAR) or laser scanning has been widely used to estimate forest structural parameters and biomass. However, LiDAR is rarely used to estimate crop parameters because the short, dense canopies of crops limit the accuracy of the results. The objective of this study is to explore the potential of airborne LiDAR data in estimating biomass components of maize, namely aboveground biomass (AGB) and belowground biomass (BGB). Five biomass-related factors were measured during the entire growing season of maize. The field-measured canopy height and leaf area index (LAI) were identified as the factors that most directly affect biomass components through Pearson's correlation analysis and structural equation modeling (SEM). Field-based estimation models were proposed to estimate maize biomass components during the tasseling stage. Subsequently, the maize height and LAI over the entire study area were derived from LiDAR data and were used as input for the estimation models to map the spatial pattern of the biomass components. The results showed that the LiDAR-estimated biomass was comparable to the field-measured biomass, with root mean squared errors (RMSE) of 288.51 g/m² (AGB), and 75.81 g/m² (BGB). In conclusion, airborne LiDAR has great potential for estimating canopy height, LAI, and biomass components of maize during the peak growing season.     

落叶阔叶林冠层光合有效辐射分量的遥感模拟与分析

冠层绿色叶片(光合组分)的光合有效辐射分量(绿色FPAR)真实地反映了植被与外界进行物质和能量交换的能力,获取冠层光合组分吸收的太阳光合有效辐射,对生态系统生产力的遥感估算精度的提高具有重要的意义。研究以落叶阔叶林为例,基于SAIL模型模拟森林冠层光合组分和非光合组分吸收的光合有效辐射,研究冠层FPAR变化规律以及与植被指数的相关关系。结果表明,冠层结构的改变会影响冠层对PAR的吸收能力,冠层绿色FPAR的大小与植被面积指数及光合组分面积比相关;在高覆盖度植被区,冠层绿色FPAR占冠层总FPAR的80%以上,非光合组分的贡献较小,但在低植被覆盖区,当光合组分和非光合组分面积相同时,绿色FPAR不及冠层总FPAR的50%;相比于NDVI,北方落叶阔叶林冠层EVI与绿色FPAR存在更为显著的线性相关关系(R~20.99)。     

中亚热带森林单木地上生物量的机载激光雷达估测

以雪峰山武冈林场为研究对象,利用遥感数据和地面实测样地数据,研究机载激光雷达（LiDAR）估测中亚热带森林乔木层单木地上生物量的能力.利用条件随机场和最优化方法实现LiDAR点云的单木分割,以单木尺度为对象提取的植被点云空间结构、回波特征以及地形特征等作为遥感变量,采用回归模型估测乔木层地上生物量.结果表明: 针叶林、阔叶林和针阔混交林的单木识别率分别为93%、86%和60%;多元逐步回归模型的调整决定系数分别为0.83、0.81和0.74,均方根误差分别为28.22、29.79和32.31 t·hm^-2;以冠层体积、树高百分位值、坡度和回波强度值构成的模型精度明显高于以树高为因子的传统回归模型精度.以单木为对象从LiDAR点云中提取的遥感变量有助于提高森林生物量估测精度.
     

Comparing global models of terrestrial net primary productivity (NPP): importance of vegetation structure on seasonal NPP estimates

Estimates of the seasonal absorbed fraction of photosynthetically active radiation (FPAR) and net primary productivity (NPP) are compared among four production efficiency models (PEMs) and seven terrestrial biosphere models simulating canopy development. In addition, the simulated FPARs of the models are compared to the FASIR-FPAR derived from NOAA-AVHRR satellite observations. All models reproduce observed summergreen phenology of temperate deciduous forests rather well, but perform less well for raingreen phenology of savannas. Some models estimate a much longer active canopy in savannas than indicated by satellite observations. As a result, these models estimate high negative monthly NPP during the dry season. For boreal and tropical evergreen ecosystems, several models overestimate LAI and FPAR. When the simulated canopy does respond to unfavourable periods, the seasonal NPP is largely determined by absorbed photosynthetically active radiation (APAR). When the simulated canopy does not respond to unfavourable periods, the light use efficiency (LUE) influences the seasonal NPP more. However, the relative importance of APAR and LUE can change seasonally.     

Canopy closure estimation in a temperate forest using airborne LiDAR and LANDSAT ETM+ data

Aims　Forest canopy closure is one of the essential factors in forest survey, and plays an important role in forest ecosystem management. It is of great significance to study how to apply LiDAR (light detection and ranging) data efficiently in remote sensing estimation of forest canopy closure. LiDAR can be used to obtain data fast and accurately and therefore be used as training and validation data to estimate forest canopy closure in large spatial scale. It can compensate for the insufficiency (e.g. labor-intensive, time-consuming) of conventional ground survey, and provide foundations to forest inventory.Methods　In this study, we estimated canopy closure of a temperate forest in Genhe forest of Da Hinggan Ling area, Nei Mongol, China, using LiDAR and LANDSAT ETM+ data. Firstly, we calculated the canopy closure from ALS (Airborne Laser Scanning) high density point cloud data. Then, the estimated canopy closure from ALS data was used as training and validation data to modeling and inversion from eight vegetation indices computed from LANDSAT ETM+ data. Three approaches, multi-variable stepwise regression (MSR), random forest (RF) and Cubist, were developed and tested to estimate canopy closure from these vegetation indices, respectively.Important findings The validation results showed that the Cubist model yielded the highest accuracy compared to the other two models (determination coefficient (R²) = 0.722, root mean square error (RMSE) = 0.126, relative root mean square error (rRMSE) = 0.209, estimation accuracy (EA) = 79.883%). The combination of LiDAR data and LANDSAT ETM+ showed great potential to accurately estimate the canopy closure of the temperate forest. However, the model prediction capability needs to be further improved in order to be applied in larger spatial scale. More independent variables from other remotely sensed datasets, e.g. topographic data, texture information from high-resolution imagery, should be added into the model. These variables can help to reduce the influence of optical image, vegetation indices, terrain and shadow and so on. Moreover, the accuracy of the LiDAR-derived canopy closure needs to be further validated in future studies.     

Revisiting a universal airborne light detection and ranging approach for tropical forest carbon mapping: scaling-up from tree to stand to landscape

Airborne laser scanning provides continuous coverage mapping of forest canopy height and thereby is a powerful tool to scale-up above-ground biomass (AGB) estimates from stand to landscape. A critical first step is the selection of the plot variables which can be related to light detection and ranging (LiDAR) statistics. A universal approach was previously proposed which combines local and regional estimates of basal area (BA) and wood density with LiDAR-derived canopy height to map carbon at a regional scale (Asner et al. in Oecologia 168:1147–1160, 2012). Here we explore the contribution of stem diameter distribution, specific wood density and height-diameter (H–D) allometry to forest stand AGB and propose an alternative model. By applying the new model to a large tropical forest data set we show that an appropriate choice of input variables is essential to minimize prediction error of stand AGB which will propagate at larger scale. Stem number (N) and average stem cross-sectional area should be used instead of BA when scaling from tree to plot. Stand quadratic mean diameter above the census threshold diameter size should be preferred over stand mean diameter as it reduces the prediction error of stand AGB by a factor of ten. Wood density should be weighted by stem volume per species instead of BA. LiDAR-derived statistics should prove useful for estimating local H-D allometries as well as mapping N and the mean quadratic diameter above 10 cm at the landscape level. Prior stratification into forest types is likely to improve both estimation procedures significantly and is considered the foremost current challenge.     

Estimation of effective plant area index for South Korean forests using LiDAR system

Light Detection and Ranging (LiDAR) systems can be used to estimate both vertical and horizontal forest structure. Woody components, the leaves of trees and the understory can be described with high precision, using geo-registered 3D-points. Based on this concept, the Effective Plant Area Indices (PAI_e) for areas of Korean Pine (Pinus koraiensis), Japanese Larch (Larix leptolepis) and Oak (Quercus spp.) were estimated by calculating the ratio of intercepted and incident LIDAR laser rays for the canopies of the three forest types. Initially, the canopy gap fraction (G _LiDAR ) was generated by extracting the LiDAR data reflected from the canopy surface, or inner canopy area, using k-means statistics. The LiDAR-derived PAI_e was then estimated by using G _LIDAR with the Beer-Lambert law. A comparison of the LiDAR-derived and field-derived PAI_e revealed the coefficients of determination for Korean Pine, Japanese Larch and Oak to be 0.82, 0.64 and 0.59, respectively. These differences between field-based and LIDAR-based PAI_e for the different forest types were attributed to the amount of leaves and branches in the forest stands. The absence of leaves, in the case of both Larch and Oak, meant that the LiDAR pulses were only reflected from branches. The probability that the LiDAR pulses are reflected from bare branches is low as compared to the reflection from branches with a high leaf density. This is because the size of the branch is smaller than the resolution across and along the 1 meter LIDAR laser track. Therefore, a better predictive accuracy would be expected for the model if the study would be repeated in late spring when the shoots and leaves of the deciduous trees begin to appear.     

Using Satellite and Airborne LiDAR to Model Woodpecker Habitat Occupancy at the Landscape Scale

Incorporating vertical vegetation structure into models of animal distributions can improve understanding of the patterns and processes governing habitat selection. LiDAR can provide such structural information, but these data are typically collected via aircraft and thus are limited in spatial extent. Our objective was to explore the utility of satellite-based LiDAR data from the Geoscience Laser Altimeter System (GLAS) relative to airborne-based LiDAR to model the north Idaho breeding distribution of a forest-dependent ecosystem engineer, the Red-naped sapsucker (Sphyrapicus nuchalis). GLAS data occurred within ca. 64 m diameter ellipses spaced a minimum of 172 m apart, and all occupancy analyses were confined to this grain scale. Using a hierarchical approach, we modeled Red-naped sapsucker occupancy as a function of LiDAR metrics derived from both platforms. Occupancy models based on satellite data were weak, possibly because the data within the GLAS ellipse did not fully represent habitat characteristics important for this species. The most important structural variables influencing Red-naped Sapsucker breeding site selection based on airborne LiDAR data included foliage height diversity, the distance between major strata in the canopy vertical profile, and the vegetation density near the ground. These characteristics are consistent with the diversity of foraging activities exhibited by this species. To our knowledge, this study represents the first to examine the utility of satellite-based LiDAR to model animal distributions. The large area of each GLAS ellipse and the non-contiguous nature of GLAS data may pose significant challenges for wildlife distribution modeling; nevertheless these data can provide useful information on ecosystem vertical structure, particularly in areas of gentle terrain. Additional work is thus warranted to utilize LiDAR datasets collected from both airborne and past and future satellite platforms (e.g. GLAS, and the planned IceSAT2 mission) with the goal of improving wildlife modeling for more locations across the globe.     

Characterization of diverse plant communities in Aspen Parkland rangeland using LiDAR data

Question: How effective is high-resolution airborne LiDAR technology for quantifying biophysical characteristics of multiple community types within diverse rangeland environments? Location: Native Aspen Parkland vegetation in central Alberta, Canada. Methods: Vegetation within 117 reference plots stratified across eight types, including forest, shrubland, upland grassland and lowland meadow communities, were assessed in 2001 for the height, cover and density of vegetation within various strata (herb, shrub and tree layers). Actual ground data were subsequently compared against modelled values for each community type and strata derived from the analysis of airborne LiDAR data obtained in 2000. Results: LiDAR data were effective for quantifying vegetation height, cover and density of the overstory within closed- and open Populus forest communities. However, LiDAR measurements typically underestimated the height and cover of shrublands, as well as most of the herbaceous communities. Analysis of LiDAR intensity data indicated reflectance generally decreased as LiDAR sampling points moved upwards from the ground to the vegetation canopy. Conclusions: While LiDAR technology is useful for characterizing deciduous forest properties, the quantification of understory vegetation characteristics, as well as those of individual shrublands and grasslands, was more limiting. Further refinements in analysis methods are necessary to increase the reliability of characterizing these communities.     

Estimating stem volume and biomass of Pinus koraiensis using LiDAR data

The objective of this study was to estimate the stem volume and biomass of individual trees using the crown geometric volume (CGV), which was extracted from small-footprint light detection and ranging (LiDAR) data. Attempts were made to analyze the stem volume and biomass of Korean Pine stands (Pinus koraiensis Sieb. et Zucc.) for three classes of tree density: low (240 N/ha), medium (370 N/ha), and high (1,340 N/ha). To delineate individual trees, extended maxima transformation and watershed segmentation of image processing methods were applied, as in one of our previous studies. As the next step, the crown base height (CBH) of individual trees has to be determined; information for this was found in the LiDAR point cloud data using k-means clustering. The LiDAR-derived CGV and stem volume can be estimated on the basis of the proportional relationship between the CGV and stem volume. As a result, low tree-density plots had the best performance for LiDAR-derived CBH, CGV, and stem volume (R ² = 0.67, 0.57, and 0.68, respectively) and accuracy was lowest for high tree-density plots (R ² = 0.48, 0.36, and 0.44, respectively). In the case of medium tree-density plots accuracy was R ² = 0.51, 0.52, and 0.62, respectively. The LiDAR-derived stem biomass can be predicted from the stem volume using the wood basic density of coniferous trees (0.48 g/cm³), and the LiDAR-derived above-ground biomass can then be estimated from the stem volume using the biomass conversion and expansion factors (BCEF, 1.29) proposed by the Korea Forest Research Institute (KFRI).     

基于激光雷达数据的物种分布模拟: 以美国加州内华达山脉南部区域食鱼貂分布模拟为例

生态位模型通过拟合物种分布与环境变量之间的关系提供物种空间分布预测, 在生物多样性研究中有广泛应用。激光雷达(LiDAR)是一种新兴的主动遥感技术, 已被大量应用于森林三维结构信息的提取, 但其在物种分布模拟的应用研究比较缺乏。本研究以美国加州内华达山脉南部地区的食鱼貂(Martes pennanti)的分布模拟为例, 探索LiDAR技术在物种分布模拟中的有效性。生态位模型采用5种传统多类分类器, 包括神经网络、广义线性模型、广义可加模型、最大熵模型和多元自适应回归样条模型, 并使用正样本-背景学习(presence and background learning, PBL)算法进行模型校正; 同时对这5种模型使用加权平均进行模型集成, 作为第6个模型。此外, 一类最大熵模型也被用于模拟该物种的空间分布。模型的连续输出和二值输出分别使用AUC (area under the receiver operating characteristic curve)以及基于正样本-背景数据的评价指标F_pb进行评价。结果表明, 仅考虑气候因子(温度和降水)时, 7个模型的AUC和F_pb平均值分别为0.779和1.077; 当考虑LiDAR变量(冠层容重、枝下高、叶面积指数、高程、坡度等)后, AUC和F_pb分别为0.800和1.106。该研究表明, LiDAR数据能够提高食鱼貂空间分布的预测精度, 在物种分布模拟方面存在一定的应用价值。     

2010—2012年北京植被光合有效辐射吸收比例的时空变化

利用MODIS产品中分辨率为1 km的光合有效辐射吸收比例(FPAR)数据,结合植被功能型分类,分析2010—2012年北京植被FPAR的空间分布特征,以及各种植被类型FPAR的多年变化,并进一步探讨了FPAR与叶面积指数(LAI)之间的相关性.结果表明: 研究期间,北京植被的FPAR空间分布均呈现出东北部、西南部高,并向中心城区逐渐递减的分布特征.通过FPAR的叠加分析还发现,各种植被类型FPAR年平均值的波动均较小,针叶树、阔叶树、草地、作物FPAR的年均值波动范围仅分别在0.42～0.44、0.38～0.39、0.32～0.33、0.21～0.22,但各种植被类型FPAR的年内变化范围均较大.各种植被类型的FPAR与LAI也具有较好的线性或对数关系.经过Timesat软件中的Savitzky-Golay平滑滤波后,各种植被类型FPAR的季节性变化特征更加明显.     

LiDAR as a rapid tool to predict forest habitat types in Natura 2000 networks

Management strategies for the conservation of biodiversity can be developed only with precise information on the spatial distribution of organisms on relevant, mostly regional, spatial scales. Current surrogates for approximating the distribution of biodiversity are habitats mapped within a number of national and international frameworks (e.g., Natura 2000), even though conventional habitat mapping is time consuming and requires well-trained personnel. Here we evaluated the use of light detection and ranging (LiDAR) to map forest habitat types to simplify the process. We used available data of habitat types for the Bavarian Forest National Park as a basis to predict habitat types with LiDAR-derived variables. Furthermore, we compared these results with predictions based on extensive ground-based climate, soil and vegetation data. Using linear and flexible discriminant analyses, we found that LiDAR is able to predict forest habitat types with the same overall accuracy as the extensive ground data for climate, soil and vegetation composition. Subtle differences in the vegetation structure between habitat types, particularly in the vertical and horizontal vegetation profiles, were captured by LiDAR. These differences in the physiognomy were in part caused by changes in altitude, which also influence tree species composition. We propose that the most-efficient way to identify forest habitat types according Natura 2000 is to combine remote-sensing LiDAR data with well-directed field surveys.     

Estimation of leaf area index and gap fraction in two broad-leaved forests by using small-footprint airborne LiDAR

In this study, we evaluated methods for reliably estimating leaf area index (LAI) and gap fraction in two different types of broad-leaved forests by the use of airborne light detection and ranging (LiDAR) data. We evaluated 13 estimation variables related to laser height, laser penetration rate, and laser point attributes that were derived from LiDAR analyses. The relationships between LiDAR-derived estimates and field-based measurements taken from the forests were evaluated with simple linear regressions. The data from the two forests were analyzed separately and as an integrated dataset. Among the laser height variables, the coefficient of variation (CV) of all laser point heights had the highest level of accuracy for estimating both LAI and gap fraction. However, we recommend that more evaluations be conducted prior to the use of CV in forests with complex structures. The simplest laser penetration variable, which represents the ratio of the number of ground points to the total number of all points (P _ALL), also had a high level of accuracy for estimating LAI and gap fraction at the study sites regardless of whether the data were analyzed separately or as an integrated data set. Furthermore, P _ALL values showed near 1:1 relationships with the field-based gap fraction values. Hence, the use of P _ALL may be the most practical for estimating LAI and gap fraction in broad-leaved forests, even when the canopies are heavily closed.     

Estimation of wetland vegetation height and leaf area index using airborne laser scanning data

Wetland vegetation is a core component of wetland ecosystems. Wetland vegetation structural parameters, such as height and leaf area index (LAI) are important variables required by earth-system and ecosystem models. Therefore, rapid, accurate, objective and quantitative estimations of wetland vegetation structural parameters are essential. The airborne laser scanning (also called LiDAR) is an active remote sensing technology and can provide accurate vertical vegetation structural parameters, but its accuracy is limited by short, dense vegetation canopies that are typical of wetland environments. The objective of this research is to explore the potential of estimating height and LAI for short wetland vegetation using airborne discrete-return LiDAR data.The accuracies of raw laser points and LiDAR-derived digital elevation models (DEM) data were assessed using field GPS measured ground elevations. The results demonstrated very high accuracy of 0.09 m in raw laser points and the root mean squared error (RMSE) of the LiDAR-derived DEM was 0.15 m.Vegetation canopy height was estimated from LiDAR data using a canopy height model (CHM) and regression analysis between field-measured vegetation heights and the standard deviation (σ) of detrended LiDAR heights. The results showed that the actual height of short wetland vegetation could not be accurately estimated using the raster CHM vegetation height. However, a strong relationship was observed between the σ and the field-measured height of short wetland vegetation and the highest correlation occurred (R² = 0.85, RMSE = 0.14 m) when sample radius was 1.50 m. The accuracy assessment of the best-constructed vegetation height prediction model was conducted using 25 samples that were not used in the regression analysis and the results indicated that the model was reliable and accurate (R² = 0.84, RMSE = 0.14 m).Wetland vegetation LAI was estimated using laser penetration index (LPI) and LiDAR-predicted vegetation height. The results showed that the vegetation height-based predictive model (R² = 0.79) was more accurate than the LPI-based model (the highest R² was 0.70). Moreover, the LAI predictive model based on vegetation height was validated using the leave-one-out cross-validation method and the results showed that the LAI predictive model had a good generalization capability. Overall, the results from this study indicate that LiDAR has a great potential to estimate plant height and LAI for short wetland vegetation.     

Using airborne laser scanning to model potential abundance and assemblages of forest passerines

Modelling and forecasting of the distribution and abundance of organisms using environmental variables is a major focus of applied ecological research. High-resolution airborne laser scanning is a recently developed remote-sensing method that provides data that can be used as surrogates for the vertical structure of the vegetation. These data can be used for modelling the occurrence and abundance of species or species assemblages. Until now, few studies evaluated the potential of these data for use in such models, or compared the suitability of data obtained by airborne systems with data gained by alternative methods. To fill part of this gap, we used forest passerine bird species to evaluate airborne laser scanning data for statistical modelling of potential bird abundances and composition of assemblages. Birds were counted in a mixed montane forest, on 223 1-ha plots along four transects. In the same period, these areas were scanned using Light Detection And Ranging (LiDAR) to characterise canopy structure. Additionally, we used visual interpretations of aerial photographs and field measurements on the same plots to derive habitat variables for comparison. We found clear correlations between the LiDAR variables and the other two variable sets using canonical correlation analysis. With a few exceptions, predictive power of the LiDAR data set for modelling abundances of single species, with up to 40% explained variance, was superior to that of the other two data sets. Models agreed with existing ecological knowledge for these species. For modelling of species composition with redundancy analysis, LiDAR was also superior to the other two data sets with more than 20% unique contribution to the explained variance. Our results clearly showed that LiDAR provides valuable data for describing and modelling single species as well as assemblages of forest organisms.     

Influences of vegetation,model, and data parameters on forest aboveground biomass assessment using an area-based approach

Although aboveground biomass (AGB) estimation using area-based approaches (ABAs) and its application to forestry have been actively researched through three decades, this technology has been little operationalized in the Central European forest sector. That means specific recommendations are needed in order to apply ABA for forest biomass modelling in this region. The present study was directed to filling such gaps while examining the effect of input ABA parameters on AGB model quality in conditions of mixed mountainous forests in Central Europe. Specific objectives were to assess whether the strength of the AGB model can be impacted by 1) canopy conditions (leaf-on and leaf-off), 2) airborne LiDAR point density (2.5, 5.0, 7.5, 10.0 points/m²), 3) field methods to estimate AGB (with regeneration components or without), and 4) machine learning methods (AdaBoost, Random decision forest, multilayer neural network, and Bayesian ridge regression). The results show that canopy conditions and airborne LiDAR point densities did not affect the strength of the AGB model, but that model's strength was affected by the vegetation regeneration component in the field biomass reference and by the machine learning method tested for modelling. AdaBoost and random decision forest were the most successful methods. To evaluate the quality of an AGB model it is recommended to combine several individual evaluation functions into the model score. The study highlights several recommendations to follow when estimating AGB from ALS using an ABA in Central European forests.