Insights into ligand-induced conformational change in Cel5A from Bacillus agaradhaerens revealed by a catalytically active crystal form

Glycoside hydrolases are ubiquitous enzymes involved in a diverse array of biological processes, from the breakdown of biomass, through to viral invasion and cellular signalling. Endoglucanase Cel5A from Bacillus agaradhaerens, classified into glycoside hydrolase family 5, has been studied in a catalytically inactive crystal form at low pH conditions, in which native and complex structures revealed the importance of ring distortion during catalysis. Here, we present the structure of Cel5A in a new crystal form obtained at higher pH values in which the enzyme is active "in-crystal". Native, cellotriosyl-enzyme intermediate and beta-d-cellobiose structures were solved at 1.95, 1.75 and 2.1 A resolution, respectively. These structures reveal two classes of conformational change: those caused by crystal-packing and pH, with others induced upon substrate binding. At pH 7 a histidine residue, His206, implicated in substrate-binding and catalysis, but previously far removed from the substrate-binding cleft, moves over 10 A into the active site cleft in order to interact with the substrate in the +2 subsite. Occupation of the -1 subsite by substrate induces a loop closure to optimise protein-ligand interactions. Cel5A, along with the unrelated family 45 and family 6 cellulases, provides further evidence of substantial conformational change in response to ligand binding for this class of hydrolytic enzyme.     

Nucleoside binding site of herpes simplex type 1 thymidine kinase analyzed by X-ray crystallography

The crystal structures of the full-length Herpes simplex virus type 1 thymidine kinase in its unligated form and in a complex with an adenine analogue have been determined at 1.9 A resolution. The unligated enzyme contains four water molecules in the thymidine pocket and reveals a small induced fit on substrate binding. The structure of the ligated enzyme shows for the first time a bound adenine analogue after numerous complexes with thymine and guanine analogues have been reported. The adenine analogue constitutes a new lead compound for enzyme-prodrug gene therapy. In addition, the structure of mutant Q125N modifying the binding site of the natural substrate thymidine in complex with this substrate has been established at 2.5 A resolution. It reveals that neither the binding mode of thymidine nor the polypeptide backbone conformation is altered, except that the two major hydrogen bonds to thymidine are replaced by a single water-mediated hydrogen bond, which improves the relative acceptance of the prodrugs aciclovir and ganciclovir compared with the natural substrate. Accordingly, the mutant structure represents a first step toward improving the virus-directed enzyme-prodrug gene therapy by enzyme engineering.     

Structural characterization of a beta-diketone hydrolase from the cyanobacterium Anabaena sp. PCC 7120 in native and product-bound forms, a coenzyme A-independent member of the crotonase suprafamily

The gene alr4455 from the well-studied cyanobacterium Anabaena sp. PCC 7120 encodes a crotonase orthologue that displays beta-diketone hydrolase activity. Anabaena beta-diketone hydrolase (ABDH), in common with 6-oxocamphor hydrolase (OCH) from Rhodococcus sp. NCIMB 9784, catalyzes the desymmetrization of bicyclo[2.2.2]octane-2,6-dione to yield [(S)-3-oxocyclohexyl]acetic acid, a reaction unusual among the crotonase superfamily as the substrate is not an acyl-CoA thioester. The structure of ABDH has been determined to a resolution of 1.5 A in both native and ligand-bound forms. ABDH forms a hexamer similar to OCH and features one active site per enzyme monomer. The arrangement of side chains in the active site indicates that while the catalytic chemistry may be conserved in OCH orthologues, the structural determinants of substrate specificity are different. In the active site of ligand-bound forms that had been cocrystallized with the bicyclic diketone substrate bicyclo[2.2.2]octane-2,6-dione was found the product of the asymmetric enzymatic retro-Claisen reaction [(S)-3-oxocyclohexyl]acetic acid. The structures of ABDH in both native and ligand-bound forms reveal further details about structural variation and modes of coenzyme A-independent activity within the crotonases and provide further evidence of a wider suprafamily of enzymes that have recruited the crotonase fold for the catalysis of reactions other than those regularly attributed to canonical superfamily members.     

Structure and function of a novel purine specific nucleoside hydrolase from Trypanosoma vivax

The purine salvage pathway of parasitic protozoa is currently considered as a target for drug development because these organisms cannot synthesize purines de novo. Insight into the structure and mechanism of the involved enzymes can aid in the development of potent inhibitors, leading to new curative drugs. Nucleoside hydrolases are key enzymes in the purine salvage pathway of Trypanosomatidae, and they are especially attractive because they have no equivalent in mammalian cells. We cloned, expressed and purified a nucleoside hydrolase from Trypanosoma vivax. The substrate activity profile establishes the enzyme to be a member of the inosine-adenosine-guanosine-preferring nucleoside hydrolases (IAG-NH). We solved the crystal structure of the enzyme at 1.6 A resolution using MAD techniques. The complex of the enzyme with the substrate analogue 3-deaza-adenosine is presented. These are the first structures of an IAG-NH reported in the literature. The T. vivax IAG-NH is a homodimer, with each subunit consisting of ten beta-strands, 12 alpha-helices and three small 3(10)-helices. Six of the eight strands of the central beta-sheet form a motif resembling the Rossmann fold. Superposition of the active sites of this IAG-NH and the inosine-uridine-preferring nucleoside hydrolase (IU-NH) of Crithidia fasciculata shows the molecular basis of the different substrate specificity distinguishing these two classes of nucleoside hydrolases. An "aromatic stacking network" in the active site of the IAG-NH, absent from the IU-NH, imposes the purine specificity. Asp10 is the proposed general base in the reaction mechanism, abstracting a proton from a nucleophilic water molecule. Asp40 (replaced by Asn39 in the IU-NH) is positioned appropriately to act as a general acid and to protonate the purine leaving group. The second general acid, needed for full enzymatic activity, is probably part of a flexible loop located in the vicinity of the active site.     

The X-ray structure of a chitinase from the pathogenic fungus Coccidioides immitis

The X-ray structure of chitinase from the fungal pathogen Coccidioides immitis has been solved to 2.2 A resolution. Like other members of the class 18 hydrolase family, this 427 residue protein is an eight-stranded beta/alpha-barrel. Although lacking an N-terminal chitin anchoring domain, the enzyme closely resembles the chitinase from Serratia marcescens. Among the conserved features are three cis peptide bonds, all involving conserved active site residues. The active site is formed from conserved residues such as tryptophans 47, 131, 315, 378, tyrosines 239 and 293, and arginines 52 and 295. Glu171 is the catalytic acid in the hydrolytic mechanism; it was mutated to a Gln, and activity was abolished. Allosamidin is a substrate analog that strongly inhibits the class 18 enzymes. Its binding to the chitinase hevamine has been observed, and we used conserved structural features of the two enzymes to predict the inhibitors binding to the fungal enzyme.     

Observation of an arsenic adduct in an acetyl esterase crystal structure

The crystal structures of an acetyl esterase, HerE, and its complex with an inhibitor dimethylarsinic acid have been determined at 1.30- and 1.45-A resolution, respectively. Although the natural substrate for the enzyme is unknown, HerE hydrolyzes the acetyl groups from heroin to yield morphine and from phenyl acetate to yield phenol. Recently, the activity of the enzyme toward heroin has been exploited to develop a heroin biosensor, which affords higher sensitivity than other currently available detection methods. The crystal structure reveals a single domain with the canonical alpha/beta hydrolase fold with an acyl binding pocket that snugly accommodates the acetyl substituent of the substrate and three backbone amides that form a tripartite oxyanion hole. In addition, a covalent adduct was observed between the active site serine and dimethylarsinic acid, which inhibits the enzyme. This crystal structure provides the first example of an As-containing compound in a serine esterase active site and the first example of covalent modification of serine by arsenic. Thus, the HerE complex reveals the structural basis for the broad scope inhibition of serine hydrolases by As(V)-containing organic compounds.     

Transition-state complex of the purine-specific nucleoside hydrolase of T. vivax: enzyme conformational changes and implications for catalysis

Nucleoside hydrolases cleave the N-glycosidic bond of ribonucleosides. Crystal structures of the purine-specific nucleoside hydrolase from Trypanosoma vivax have previously been solved in complex with inhibitors or a substrate. All these structures show the dimeric T. vivax nucleoside hydrolase with an "open" active site with a highly flexible loop (loop 2) in its vicinity. Here, we present the crystal structures of the T. vivax nucleoside hydrolase with both soaked (TvNH-ImmH(soak)) and co-crystallised (TvNH-ImmH(co)) transition-state inhibitor immucillin H (ImmH or (1S)-1-(9-deazahypoxanthin-9-yl)-1,4-dideoxy-1,4-imino-D-ribitol) to 2.1 A and 2.2 A resolution, respectively. In the co-crystallised structure, loop 2 is ordered and folds over the active site, establishing previously unobserved enzyme-inhibitor interactions. As such this structure presents the first complete picture of a purine-specific NH active site, including leaving group interactions. In the closed active site, a water channel of highly ordered water molecules leads out from the N7 of the nucleoside toward bulk solvent, while Trp260 approaches the nucleobase in a tight parallel stacking interaction. Together with mutagenesis results, this structure rules out a mechanism of leaving group activation by general acid catalysis, as proposed for base-aspecific nucleoside hydrolases. Instead, the structure is consistent with the previously proposed mechanism of leaving group protonation in the T. vivax nucleoside hydrolase where aromatic stacking with Trp260 and an intramolecular O5'-H8C hydrogen bond increase the pKa of the N7 sufficiently to allow protonation by solvent. A mechanism that couples loop closure to the positioning of active site residues is proposed based on a comparison of the soaked structure with the co-crystallized structure. Interestingly, the dimer interface area increases by 40% upon closure of loop 2, with loop 1 of one subunit interacting with loop 2 of the other subunit, suggesting a relationship between the dimeric form of the enzyme and its catalytic activity.     

Structure of isocitrate lyase, a persistence factor of Mycobacterium tuberculosis

Isocitrate lyase (ICL) plays a pivotal role in the persistence of Mycobacterium tuberculosis in mice by sustaining intracellular infection in inflammatory macrophages. The enzyme allows net carbon gain by diverting acetyl-CoA from beta-oxidation of fatty acids into the glyoxylate shunt pathway. Given its potential as a drug target against persistent infections, we solved its structure without ligand and in complex with two inhibitors. Covalent modification of an active site residue, Cys 191, by the inhibitor 3-bromopyruvate traps the enzyme in a catalytic conformation with the active site completely inaccessible to solvent. The structure of a C191S mutant of the enzyme with the inhibitor 3-nitropropionate provides further insight into the reaction mechanism.     

Three-dimensional structure of Erwinia chrysanthemi pectin methylesterase reveals a novel esterase active site

Most structures of neutral lipases and esterases have been found to adopt the common alpha/beta hydrolase fold and contain a catalytic Ser-His-Asp triad. Some variation occurs in both the overall protein fold and in the location of the catalytic triad, and in some enzymes the role of the aspartate residue is replaced by a main-chain carbonyl oxygen atom. Here, we report the crystal structure of pectin methylesterase that has neither the common alpha/beta hydrolase fold nor the common catalytic triad. The structure of the Erwinia chrysanthemi enzyme was solved by multiple isomorphous replacement and refined at 2.4 A to a conventional crystallographic R-factor of 17.9 % (R(free) 21.1 %). This is the first structure of a pectin methylesterase and reveals the enzyme to comprise a right-handed parallel beta-helix as seen in the pectinolytic enzymes pectate lyase, pectin lyase, polygalacturonase and rhamnogalacturonase, and unlike the alpha/beta hydrolase fold of rhamnogalacturonan acetylesterase with which it shares esterase activity. Pectin methylesterase has no significant sequence similarity with any protein of known structure. Sequence conservation among the pectin methylesterases has been mapped onto the structure and reveals that the active site comprises two aspartate residues and an arginine residue. These proposed catalytic residues, located on the solvent-accessible surface of the parallel beta-helix and in a cleft formed by external loops, are at a location similar to that of the active site and substrate-binding cleft of pectate lyase. The structure of pectin methylesterase is an example of a new family of esterases.     

Crystal complex structures reveal how substrate is bound in the -4 to the +2 binding sites of Humicola grisea Cel12A

As part of an ongoing enzyme discovery program to investigate the properties and catalytic mechanism of glycoside hydrolase family 12 (GH 12) endoglucanases, a GH family that contains several cellulases that are of interest in industrial applications, we have solved four new crystal structures of wild-type Humicola grisea Cel12A in complexes formed by soaking with cellobiose, cellotetraose, cellopentaose, and a thio-linked cellotetraose derivative (G2SG2). These complex structures allow mapping of the non-covalent interactions between the enzyme and the glucosyl chain bound in subsites -4 to +2 of the enzyme, and shed light on the mechanism and function of GH 12 cellulases. The unhydrolysed cellopentaose and the G2SG2 cello-oligomers span the active site of the catalytically active H.grisea Cel12A enzyme, with the pyranoside bound in subsite -1 displaying a S31 skew boat conformation. After soaking in cellotetraose, the cello-oligomer that is found bound in site -4 to -1 contains a beta-1,3-linkage between the two cellobiose units in the oligomer, which is believed to have been formed by a transglycosylation reaction that has occurred during the ligand soak of the protein crystals. The close fit of this ligand and the binding sites occupied suggest a novel mixed beta-glucanase activity for this enzyme.     

Crystal structures of the apo form of β-fructofuranosidase from Bifidobacterium longum and its complex with fructose

We solved the 1.8 ? crystal structure of β-fructofuranosidase from Bifidobacterium longum KN29.1 - a unique enzyme that allows these probiotic bacteria to function in the human digestive system. The sequence of β-fructofuranosidase classifies it as belonging to the glycoside hydrolase family 32 (GH32). GH32 enzymes show a wide range of substrate specificity and different functions in various organisms. All enzymes from this family share a similar fold, containing two domains: an N-terminal five-bladed β-propeller and a C-terminal β-sandwich module. The active site is located in the centre of the β-propeller domain, in the bottom of a 'funnel'. The binding site, -1, responsible for tight fructose binding, is highly conserved among the GH32 enzymes. Bifidobacterium longum KN29.1 β-fructofuranosidase has a 35-residue elongation of the N-terminus containing a five-turn α-helix, which distinguishes it from the other known members of the GH32 family. This new structural element could be one of the functional modifications of the enzyme that allows the bacteria to act in a human digestive system. We also solved the 1.8 ? crystal structure of the β-fructofuranosidase complex with β-D-fructose, a hydrolysis product obtained by soaking apo crystal in raffinose.     

Yeast D-amino acid oxidase: structural basis of its catalytic properties

The 3D structure of the flavoprotein D-amino acid oxidase (DAAO) from the yeast Rhodotorula gracilis (RgDAAO) in complex with the competitive inhibitor anthranilate was solved (resolution 1.9A) and structural features relevant for the overall conformation and for catalytic activity are described. The FAD is bound in an elongated conformation in the core of the enzyme. Two anthranilate molecules are found within the active site cavity; one is located in a funnel forming the entrance, and the second is in contact with the flavin. The anchoring of the ligand carboxylate with Arg285 and Tyr223 is found for all complexes studied. However, while the active site group Tyr238-OH interacts with the carboxylate in the case of the substrate D-alanine, of D-CF(3)-alanine, or of L-lactate, in the anthranilate complex the phenol group rotates around the C2-C3 bond thus opening the entrance of the active site, and interacts there with the second bound anthranilate. This movement serves in channeling substrate to the bottom of the active site, the locus of chemical catalysis. The absence in RgDAAO of the "lid" covering the active site, as found in mammalian DAAO, is interpreted as being at the origin of the differences in kinetic mechanism between the two enzymes. This lid has been proposed to regulate product dissociation in the latter, while the side-chain of Tyr238 might exert a similar role in RgDAAO. The more open active site architecture of RgDAAO is the origin of its much broader substrate specificity. The RgDAAO enzyme forms a homodimer with C2 symmetry that is different from that reported for mammalian D-amino acid oxidase. This different mode of aggregation probably causes the differences in stability and tightness of FAD cofactor binding between the DAAOs from different sources.     

Crystal structure of a bacterial cocaine esterase.

Here we report the first structure of a cocaine-degrading enzyme. The bacterial esterase, cocE, hydrolyzes pharmacologically active (-)-cocaine to a non-psychoactive metabolite with a rate faster than any other reported cocaine esterase (kcat = 7.8 s-1 and KM = 640 nM). Because of the high catalytic proficiency of cocE, it is an attractive candidate for novel protein-based therapies for cocaine overdose. The crystal structure of cocE, solved by multiple anomalous dispersion (MAD) methods, reveals that cocE is a serine esterase composed of three domains: (i) a canonical alpha/beta hydrolase fold (ii) an alpha-helical domain that caps the active site and (iii) a jelly-roll-like beta-domain that interacts extensively with the other two domains. The active site was identified within the interface of all three domains by analysis of the crystal structures of transition state analog adduct and product complexes, which were refined at 1.58 A and 1.63 A resolution, respectively. These structural studies suggest that substrate recognition arises partly from interactions between the benzoyl moiety of cocaine and a highly evolved specificity pocket.     

Crystal structure of hydroxynitrile lyase from Sorghum bicolor in complex with the inhibitor benzoic acid: a novel cyanogenic enzyme

The crystal structure of the hydroxynitrile lyase from Sorghum bicolor (SbHNL) in complex with the inhibitor benzoic acid has been determined at 2.3 A resolution and refined to a crystallographic R-factor of 16.5%. The SbHNL sequence places the enzyme in the alpha/beta hydrolase family where the active site nucleophile is predicted to be organized in a characteristic pentapeptide motif which is part of the active site strand-turn-helix motif. In SbHNL, however, a unique two-amino acid deletion is next to the putative active site Ser158, removing thereby the putative oxyanion hole-forming Tyr residue. The presented X-ray structure shows that the overall folding pattern of SbHNL is similar to that of the closely related wheat serine carboxypeptidase (CPD-WII); however, the deletion in SbHNL is forcing the putative active site residues away from the expected hydrolase binding site toward a small hydrophobic cleft, which also contains the inhibitor benzoic acid, defining thereby a completely different SbHNL active site architecture where the traditional view of a classic triad is not given any more. Rather, we propose a mechanism involving general base catalysis by the carboxy-terminal Trp270 carboxyl group and proton transfer toward the leaving nitrile group by an active site water molecule. The unexpected interactions of the inhibitor with the new SbHNL active site also reveal the structural basis for the enzyme's limited substrate specificity. The implications of this structure on the evolution of catalysis in the hydroxynitrile lyase superfamily are discussed.     

Structure of Acinetobacter strain ADP1 protocatechuate 3, 4-dioxygenase at 2.2 A resolution: implications for the mechanism of an intradiol dioxygenase

The crystal structures of protocatechuate 3,4-dioxygenase from the soil bacteria Acinetobacterstrain ADP1 (Ac 3,4-PCD) have been determined in space group I23 at pH 8.5 and 5.75. In addition, the structures of Ac 3,4-PCD complexed with its substrate 3, 4-dihydroxybenzoic acid (PCA), the inhibitor 4-nitrocatechol (4-NC), or cyanide (CN(-)) have been solved using native phases. The overall tertiary and quaternary structures of Ac 3,4-PCD are similar to those of the same enzyme from Pseudomonas putida[Ohlendorf et al. (1994) J. Mol. Biol. 244, 586-608]. At pH 8.5, the catalytic non-heme Fe(3+) is coordinated by two axial ligands, Tyr447(OH) (147beta) and His460(N)(epsilon)(2) (160beta), and three equatorial ligands, Tyr408(OH) (108beta), His462(N)(epsilon)(2) (162beta), and a hydroxide ion (d(Fe-OH) = 1.91 A) in a distorted bipyramidal geometry. At pH 5.75, difference maps suggest a sulfate binds to the Fe(3+) in an equatorial position and the hydroxide is shifted [d(Fe-OH) = 2.3 A] yielding octahedral geometry for the active site Fe(3+). This change in ligation geometry is concomitant with a shift in the optical absorbance spectrum of the enzyme from lambda(max) = 450 nm to lambda(max) = 520 nm. Binding of substrate or 4-NC to the Fe(3+) is bidentate with the axial ligand Tyr447(OH) (147beta) dissociating. The structure of the 4-NC complex supports the view that resonance delocalization of the positive character of the nitrogen prevents substrate activation. The cyanide complex confirms previous work that protocatechuate 3,4-dioxygenases have three coordination sites available for binding by exogenous substrates. A significant conformational change extending away from the active site is seen in all structures when compared to the native enzyme at pH 8.5. This conformational change is discussed in its relevance to enhancing catalysis in protocatechuate 3,4-dioxygenases.     

Parallel substrate binding sites in a beta-agarase suggest a novel mode of action on double-helical agarose

Agarose is a gel-forming polysaccharide with an alpha-L(1,4)-3,6-anhydro-galactose, beta-D(1,3)-galactose repeat unit, from the cell walls of marine red algae. beta-agarase A, from the Gram-negative bacterium Zobellia galactanivorans, is secreted to the external medium and degrades agarose with an endo-mechanism. The structure of the inactive mutant beta-agarase A-E147S in complex with agaro-octaose has been solved at 1.7 A resolution. Two oligosaccharide chains are bound to the protein. The first one resides in the active site channel, spanning subsites -4 to -1. A second oligosaccharide binding site, on the opposite side of the protein, was filled with eight sugar units, parallel to the active site. The crystal structure of the beta-agarase A with agaro-octaose provides detailed information on agarose recognition in the catalytic site. The presence of the second, parallel, binding site suggests that the enzyme might be able to unwind the double-helical structure of agarose prior to the catalytic cleavage.     

The structure of a GH149 β-(1 → 3) glucan phosphorylase reveals a new surface oligosaccharide binding site and additional domains that are absent in the disaccharide-specific GH94 glucose-β-(1 → 3)-glucose (laminaribiose) phosphorylase

Glycoside phosphorylases (GPs) with specificity for β-(1 → 3)-gluco-oligosaccharides are potential candidate biocatalysts for oligosaccharide synthesis. GPs with this linkage specificity are found in two families thus far—glycoside hydrolase family 94 (GH94) and the recently discovered glycoside hydrolase family 149 (GH149). Previously, we reported a crystallographic study of a GH94 laminaribiose phosphorylase with specificity for disaccharides, providing insight into the enzyme's ability to recognize its' sugar substrate/product. In contrast to GH94, characterized GH149 enzymes were shown to have more flexible chain length specificity, with preference for substrate/product with higher degree of polymerization. In order to advance understanding of the specificity of GH149 enzymes, we herein solved X-ray crystallographic structures of GH149 enzyme Pro_7066 in the absence of substrate and in complex with laminarihexaose (G6). The overall domain organization of Pro_7066 is very similar to that of GH94 family enzymes. However, two additional domains flanking its catalytic domain were found only in the GH149 enzyme. Unexpectedly, the G6 complex structure revealed an oligosaccharide surface binding site remote from the catalytic site, which, we suggest, may be associated with substrate targeting. As such, this study reports the first structure of a GH149 phosphorylase enzyme acting on β-(1 → 3)-gluco-oligosaccharides and identifies structural elements that may be involved in defining the specificity of the GH149 enzymes.     

Isomaltulose synthase (PalI) of Klebsiella sp. LX3. Crystal structure and implication of mechanism

Isomaltulose synthase from Klebsiella sp. LX3 (PalI, EC 5.4.99.11) catalyzes the isomerization of sucrose to produce isomaltulose (alpha-D-glucosylpyranosyl-1,6-D-fructofuranose) and trehalulose (alpha-D-glucosylpyranosyl-1,1-d-fructofuranose). The PalI structure, solved at 2.2-A resolution with an R-factor of 19.4% and Rfree of 24.2%, consists of three domains: an N-terminal catalytic (beta/alpha)8 domain, a subdomain between N beta 3 and N alpha 3, and a C-terminal domain having seven beta-strands. The active site architecture of PalI is identical to that of other glycoside hydrolase family 13 members, suggesting a similar mechanism in substrate binding and hydrolysis. However, a unique RLDRD motif in the proximity of the active site has been identified and shown biochemically to be responsible for sucrose isomerization. A two-step reaction mechanism for hydrolysis and isomerization, which occurs in the same pocket is proposed based on both the structural and biochemical data. Selected C-terminal truncations have been shown to reduce and even abolish the enzyme activity, consistent with the predicted role of the C-terminal residues in the maintenance of enzyme conformation and active site topology.     

Characterization of Helicobacter pylori gamma-glutamyltranspeptidase reveals the molecular basis for substrate specificity and a critical role for the tyrosine 433-containing loop in catalysis

Helicobacter pylori gamma-glutamyltranspeptidase (HpGT) is a member of the N-terminal nucleophile hydrolase superfamily. It is translated as an inactive 60 kDa polypeptide precursor that undergoes intramolecular autocatalytic cleavage to generate a fully active heterodimer composed of a 40 kDa and a 20 kDa subunit. The resultant N-terminus, Thr 380, has been shown to be the catalytic nucleophile in both autoprocessing and enzymatic reactions. Once processed, HpGT catalyzes the hydrolysis of the gamma-glutamyl bond in glutathione and its conjugates. To facilitate the determination of physiologically relevant substrates for the enzyme, crystal structures of HpGT in complex with glutamate (1.6 A, Rfactor = 16.7%, Rfree = 19.0%) and an inactive HpGT mutant, T380A, in complex with S-(nitrobenzyl)glutathione (1.55 A, Rfactor = 18.7%, Rfree = 21.8%) have been determined. Residues that comprise the gamma-glutamyl binding site are primarily located in the 20 kDa subunit and make numerous hydrogen bonds with the alpha-amino and alpha-carboxylate groups of the substrate. In contrast, a single hydrogen bond occurs between the T380A mutant and the remainder of the ligand. Lack of specific coordination beyond the gamma-glutamyl moiety may account for the substrate binding permissiveness of the enzyme. Structural analysis was combined with site-directed mutagenesis of residues involved in maintaining the conformation of a loop region that covers the gamma-glutamyl binding site. Results provide evidence that access to this buried site may occur through conformational changes in the Tyr 433-containing loop, as disruption of the intricate hydrogen-bond network responsible for optimal placement of Tyr 433 significantly diminishes catalytic activity.