甲基对硫磷水解酶OPHC2的序列分析及结构预测

将氨基酸的多序列局部比对、基于结构的序列比对和氨基酸替换忍耐性分析等方法联合起来对甲基对硫磷水解酶OPHC2进行了序列分析,确定出4组保守性功能序列。根据其高级结构发现这类酶具有典型的α/β（TIM）折叠桶结构,由8个折叠结构构成活性中心区域,并且这4组保守序列都位于这8个折叠结构上。通过对这4组保守序列的进一步分析发现当一个序列中同时含有它们时,这个序列为甲基对硫磷水解酶的可能性大于60％。     

A colorimetric assay for determination of methyl parathion using recombinant methyl parathion hydrolase

A simple, rapid and sensitive colorimetric dipstick assay for the detection of the organophosphorous insecticide methyl parathion (MPT) residue in vegetables was developed. The assay was based on the hydrolysis of MPT by a recombinant methyl parathion hydrolase (recMPH), the encoding gene of which was isolated from Burkholderia cepacia, a soil bacterium indigenous to Thailand. This reaction generates protons leading to a change in pH that correlates with the amount of MPH present. Hence, the pH indicator bromothymol blue was used to monitor the MPH hydrolysis as the associated color changes can be observed by the naked eye. The recMPH was immobilized on a PVDF membrane to establish a dipstick assay format. The assays could detect MPT residues in spiked vegetable samples at the concentration of 1 mg/L without using analytical instrumentation. The test is reusable and stable for up to 3 months in the absence of any preservatives.     

Improving the thermostability of methyl parathion hydrolase from Ochrobactrum sp. M231 using a computationally aided method

Good protein thermostability is very important for the protein application. In this report, we propose a strategy which contained a prediction method to select residues related to protein thermal stability, but not related to protein function, and an experiment method to screen the mutants with enhanced thermostability. The prediction strategy was based on the calculated site evolutionary entropy and unfolding free energy difference between the mutant and wild-type (WT) methyl parathion hydrolase enzyme from Ochrobactrum sp. M231 [Ochr-methyl parathion hydrolase (MPH)]. As a result, seven amino acid sites within Ochr-MPH were selected and used to construct seven saturation mutagenesis libraries. The results of screening these libraries indicated that six sites could result in mutated enzymes exhibiting better thermal stability than the WT enzyme. A stepwise evolutionary approach was designed to combine these selected mutants and a mutant with four point mutations (S274Q/T183E/K197L/S192M) was selected. The T _m and T ₅₀ of the mutant enzyme were 11.7 and 10.2 °C higher, respectively, than that of the WT enzyme. The success of this design methodology for Ochr-MPH suggests that it was an efficient strategy for enhancing protein thermostability and suitable for protein engineering.     

Genetic surface-display of methyl parathion hydrolase on Yarrowia lipolytica for removal of methyl parathion in water

In this study, the mph gene encoding methyl parathion hydrolase from Pseudomonas sp. WBC-3 was expressed in Yarrowia lipolytica and the expressed methyl parathion hydrolase was displayed on cell surface of Y. lipolytica. The activity of methyl parathion hydrolase displayed on the yeast cells of the transformant Z51 was 59.5 U mg?1 of cell dry cells (450.6 U per mL of the culture) in the presence of 5.0 mM of Co2?. The displayed methyl parathion hydrolase had the optimal pH of 9.5 and the optimal temperature of 40 °C, respectively and was stable in the pH range of 4.5-11 and up to 40 °C. The displayed methyl parathion hydrolase was also stimulated by Co2?, Cu2?, Ni2? and Mn2?, and was not affected by Fe2?, Fe3?, Na?, K?, Ca2? and Zn2?, but was inhibited by other cations tested. Under the optimal conditions (OD(600 nm) = 2.6, the substrate concentration = 100 mg L?1 and 40 °C), 90.8 % of methyl parathion was hydrolyzed within 30 min. Under the similar conditions, 98.7, 97.0, 96.5 and 94.4 % of methyl parathion in tap water (pH 9.5), tap water (pH 6.8), seawater (pH 9.5) and natural seawater (pH 8.2) were hydrolyzed, respectively, suggesting that the methyl parathion hydrolase displayed on the yeast cells can effectively remove methyl parathion in water.     

Discovery of an intermolecular disulfide bond required for the thermostability of a heterodimeric protein from the thermophile Hydrogenobacter thermophilus

Factors that increase protein thermostability are of considerable interest in both scientific and industrial fields. Disulfide bonds are one of such factors that increase thermostability, but are rarely found in intracellular proteins because of the reducing environment of the cytosol. Here, we report the first example of an intermolecular disulfide bond between heteromeric subunits of a novel-type phosphoserine phosphatase from a thermophilic bacterium Hydrogenobacter thermophilus, which contributes to the protein thermostability at the physiological temperature. Comparison of remaining soluble proteins between wild-type and cysteine-deleted mutant using SDS-PAGE revealed that the disulfide bond increases the thermostability of the whole protein by tightly connecting a subunit with low solubility to the partner with higher solubility. Furthermore, it was strongly suggested that the disulfide bond is formed and contributes to the stability in vivo. This finding will open new avenues for the design of proteins with increased thermostability.     

Expression, purification, and characterization of a novel methyl parathion hydrolase

The mpd gene coding for a novel methyl parathion hydrolase (MPH) was previously reported and its putative open reading frame was also identified. To further confirm its coding region, the intact region encoding MPH was obtained by PCR and expressed in Escherichia coli as a hexa-His C-terminal fusion protein. The fusion protein was purified to homogeneity by metal-affinity chromatography. The enzyme activity and zymogram assay showed that the fusion protein was functional in degrading methyl parathion. The amino terminal sequencing of the purified recombinant MPH indicated that a signal peptide of the first 35 amino acids was cleaved from its precursor to form active MPH. A rat polyclonal antiserum was raised against the purified mature fusion protein. The results of Western blot and zymogram demonstrated that mature MPH in native Plesiomonas sp. strain M6 was also processed from its precursor by cleavage of a putative signal peptide at the amino terminus. The production of active MPH in E. coli was greatly improved after the coding region for the signal peptide was deleted. HPLC gel filtration of the purified mature recombinant MPH revealed that the MPH was a monomer.     

Methyl parathion hydrolase based nanocomposite biosensors for highly sensitive and selective determination of methyl parathion

This article reports the fabrication of a nanocomposite biosensor for the sensitive and specific detection of methyl parathion. The nanocomposite sensing film was prepared via the formation of gold nanoparticles on silica particles, mixing with multiwall carbon nanotubes and subsequent covalent immobilization of methyl parathion hydrolase. The composite of the individual materials was finely tuned to offer the sensing film with high specific surface area and high conductivity. A significant synergistic effect of nanocomposites on the biosensor performance was observed in biosensing methyl parathion. The square wave voltammetric responses displayed well defined peaks, linearly proportional to the concentrations of methyl parathion in the range from 0.001 μg mL?1 to 5.0 μg mL?1 with a detection limit of 0.3 ng mL?1. The application of this biosensor in the analysis of spiked garlic samples was also evaluated. The proposed protocol can be used as a platform for the simple and fast construction of biosensors with good performance for the determination of enzyme-specific electroactive species.     

Enhanced thermostability of methyl parathion hydrolase from Ochrobactrum sp. M231 by rational engineering of a glycine to proline mutation

Protein thermostability can be increased by some glycine to proline mutations in a target protein. However, not all glycine to proline mutations can improve protein thermostability, and this method is suitable only at carefully selected mutation sites that can accommodate structural stabilization. In this study, homology modeling and molecular dynamics simulations were used to select appropriate glycine to proline mutations to improve protein thermostability, and the effect of the selected mutations was proved by the experiments. The structure of methyl parathion hydrolase (MPH) from Ochrobactrum sp. M231 (Ochr-MPH) was constructed by homology modeling, and molecular dynamics simulations were performed on the modeled structure. A profile of the root mean square fluctuations of Ochr-MPH was calculated at the nanosecond timescale, and an eight-amino acid loop region (residues 186-193) was identified as having high conformational fluctuation. The two glycines nearest to this region were selected as mutation targets that might affect protein flexibility in the vicinity. The structures and conformational fluctuations of two single mutants (G194P and G198P) and one double mutant (G194P/G198P) were modeled and analyzed using molecular dynamics simulations. The results predicted that the mutant G194P had the decreased conformational fluctuation in the loop region and might increase the thermostability of Ochr-MPH. The thermostability and kinetic behavior of the wild-type and three mutant enzymes were measured. The results were consistent with the computational predictions, and the mutant G194P was found to have higher thermostability than the wild-type enzyme.     

ATP is required for correct folding and disulfide bond formation of rotavirus VP7

Rotavirus is one of very few viruses that utilize the endoplasmic reticulum (ER) for assembly, and therefore it has been used as an attractive model to study ER-associated protein folding. In this study, we have examined the requirements for metabolic energy (ATP) for correct folding of the luminal and ER-associated VP7 of rotavirus. We found that VP7 rapidly misfolds in an energy-depleted milieu and is not degraded within 60 min. We also found that VP7 attained a stable minimum-energy state soon after translation in the ER. Most surprisingly, energy-misfolded VP7 could be recovered and establish correct disulfide bonds and antigenicity following a shift to an ATP-rich milieu. Using a Semliki Forest virus expression system, we observed that VP7 requires ATP and cellular, but not viral, factors for correct disulfide bond formation. Our results show for the first time that the disulfide bond formation of rotavirus VP7 is an ATP-dependent process. It has previously been shown that chaperones hydrolyze ATP during interaction with newly synthesized polypeptides and prevent nonproductive intra- and intermolecular interactions. The most reasonable explanation for the energy requirement of VP7 is thus a close interaction during folding with an ATP-dependent chaperone, such as BiP (Grp78), and possibly with protein disulfide isomerase. Taken together, our observations provide new information about folding of ER-associated proteins in general and rotavirus VP7 in particular.     

A disulfide bond is required for functional assembly of NCX1 from complementary fragments

The cardiac Na(+)-Ca(2+) exchanger consists of a single polypeptide with two transmembrane segment (TMS) clusters separated by a large intracellular loop between TMS5 and TMS6 (Nicoll et al. (1999) J. Biol. Chem. 274, 910-917; Iwamoto et al. (1999) FEBS Lett. 446, 264-268). A "split" exchanger can be expressed by dividing the exchanger cDNA into two fragments so that the NH(2)- and CO(2)H-terminal portions of the protein are expressed as separate polypeptides in HEK293 cells. Expression of partial exchanger molecules did not result in detectable exchanger activity. Cells coexpressing both portions of the exchanger, however, displayed between 30 and 50% of the activity of the intact wild-type exchanger. The full-length exchanger contains a disulfide bond between residues 14 or 20 and 792. We examined the role of this disulfide bond in the split exchanger by mutagenesis and expression studies. Our results indicate that the function of the exchanger requires both TMS clusters and that the C(14 or 20)/C792 disulfide bond is essential for expression of active exchangers from half molecules.     

Isolation of methyl parathion-degrading strain M6 and cloning of the methyl parathion hydrolase gene

A degradative bacterium, M6, was isolated and presumptively identified as Plesiomonas sp. strain M6 was able to hydrolyze methyl parathion to p-nitrophenol. A novel organophosphate hydrolase gene designated mpd was selected from its genomic library prepared by shotgun cloning. The nucleotide sequence of the mpd gene was determined. The gene could be effectively expressed in Escherichia coli.     

Evidence for intramolecular disulfide bond shuffling in the folding of mutant human lysozyme

Our previous results using the Saccharomyces cerevisiae secretion system suggest that intramolecular exchange of disulfide bonds occurs in the folding pathway of human lysozyme in vivo (Taniyama, Y., Yamamoto, Y., Kuroki, R., and Kikuchi, M. (1990) J. Biol. Chem. 265, 7570-7575). Here we report on the results of introducing an artificial disulfide bond in mutants with 2 cysteine residues substituting for Ala83 and Asp91. The mutant (C83/91) protein was not detected in the culture medium of the yeast, probably because of incorrect folding. Thereupon, 2 cysteine residues Cys77 and Cys95 were replaced with Ala in the mutant C83/91, because a native disulfide bond Cys77-Cys95 was found not necessary for correct folding in vivo (Taniyama, Y., Yamamoto, Y., Nakao, M., Kikuchi, M., and Ikehara, M. (1988) Biochem. Biophys. Res. Commun. 152, 962-967). The resultant mutant (AC83/91) was secreted as two proteins (AC83/91-a and AC83/91-b) with different specific activities. Amino acid and peptide mapping analyses showed that two glutathiones appeared to be attached to the thiol groups of the cysteine residues introduced into AC83/91-a and that four disulfide bonds including an artificial disulfide bond existed in the AC83/91-b molecule. The presence of cysteine residues modified with glutathione may indicate that the non-native disulfide bond Cys83-Cys91 is not so easily formed as a native disulfide bond. These results suggest that the introduction of Cys83 and Cys91 may act to suppress the process of native disulfide bond formation through disulfide bond interchange in the folding of human lysozyme.     

E. coli propionyl-CoA synthetase is regulated in vitro by an intramolecular disulfide bond

The E. coli propionyl-CoA synthetase (PCS) was cloned, expressed, purified, and analyzed. Kinetic analyses suggested that the enzyme preferred propionate as substrate but would also use acetate. The purified, stored protein had relatively low activity but was activated up to about 10-fold by incubation with dithiothreitol (DTT). The enzyme activation by DTT was reversed by diamide. This suggests that the protein contains a regulatory disulfide bond and that the reduction to two sulfhydryl groups activates PCS while the oxidation to a disulfide leads to its inactivation. This idea was tested by sequential mutagenesis of the 9 Cys in the protein to Ala. It was revealed that the C128A and C315A mutants had wildtype enzyme activity but were no longer activated by DTT or inhibited by diamide. The data obtained indicate that two Cys residues could be involved in redox-regulated system through formation of an intramolecular disulfide bridge in PCS.     

E. coli propionyl-CoA synthetase is regulated in vitro by an intramolecular disulfide bond

The E. coli propionyl-CoA synthetase (PCS) was cloned, expressed, purified, and analyzed. Kinetic analyses suggested that the enzyme preferred propionate as substrate but would also use acetate. The purified, stored protein had relatively low activity but was activated up to about 10-fold by incubation with dithiothreitol (DTT). The enzyme activation by DTT was reversed by diamide. This suggests that the protein contains a regulatory disulfide bond and that the reduction to two sulfhydryl groups activates PCS while the oxidation to a disulfide leads to its inactivation. This idea was tested by sequential mutagenesis of the 9 Cys in the protein to Ala. It was revealed that the C128A and C315A mutants had wildtype enzyme activity but were no longer activated by DTT or inhibited by diamide. The data obtained indicate that two Cys residues could be involved in redox-regulated system through formation of an intramolecular disulfide bridge in PCS.     

Expression of organophosphorus hydrolase OPHC2 in Pichia pastoris: purification and characterization

Organophosphorus hydrolase is able to hydrolyze phosphoester bonds and reduce the toxicity of organophosphorus compounds. In this work, recombinant organophosphorus hydrolase OPHC2 was successfully produced by Pichia pastoris at a high expression level (approximately 5.5 g/L) using 3 L high-cell-density fermentation. The expression level is higher than those produced in other expression systems. The results of the SDS-PAGE and the Western blot analyses showed a major 36 kDa polypeptide band, which was the same size as that from the original bacteria, Pseudomonas pseudoalcaligenes C2-1. The expressed enzyme was recovered from the culture supernatant and purified by a single-step purification procedure with a recovery rate of 72.78%. The main physiochemical features of the recombinant OPHC2, including its optimum temperature and pH for the reaction, its temperature and pH stability, and its sensitivity to some metal ions and chemical reagents, were also characterized. With methyl parathion as a substrate, the optimum temperature and pH for enzyme activity are 65 degrees C and pH 9.0, respectively. It also shows good thermal and pH stability.     

理性设计二硫键提高华根霉脂肪酶热稳定性

【背景】华根霉脂肪酶的工业应用前景广泛,但是受到酶热稳定性较差的限制。【目的】对华根霉Rhizopus chinensis CCTCC M201021脂肪酶r27RCL分子结构进行理性设计,以提高该酶热稳定性。【方法】以Disulfide by design软件筛选r27RCL分子表面能够形成二硫键的突变位点,共得到7对二硫键突变。利用全质粒PCR进行定点突变,并在毕赤酵母中表达获得突变酶。【结果】最佳突变酶m9/10 (S85C-Q145C)与野生型酶r27RCL相比,60°C下的半衰期分别提高了4.5倍,T_m值提高了4.2°C,而催化活性保持不变。蛋白质晶体结构模拟显示,位于β2折叠上的85C和位于α4螺旋上的145C可形成二硫键,从而提高酶的热稳定性。【结论】酶分子中引入新增二硫键可以显著提升酶的热稳定性。     

Overexpression of methyl parathion hydrolase and its application in detoxification of organophosphates

The coding region of mpd gene corresponding to mature methyl parathion hydrolase (MPH) was heterologously overexpressed in Escherichia coli BL21 (DE3) by using pET expression system. The lactose-induced expression yield of MPH is increased 2-fold compared with IPTG as inducer. Furthermore, it was found that specific activity of MPH increased 48% by reducing the induction temperature to 22°C. The addition of 25 mM lactose at 22°C, the MPH activity of fermentation broth had a specific activity of 1.4 × 10⁴ U/mg protein. Plasmid was no significant decrease in the modified medium. The optimal pH and temperature of MPH were 8.0 and 30°C, respectively. Over a period of 5 months, the dried cells showed no significant decrease in the activity of the detoxifying enzymes. The crude enzymes in 50 mM citrate-phosphate buffer (pH 8.0) were able to degrade about 98% of the organophosphate pesticides sprayed on cabbage. The detoxification efficiency was superior to that of the treatments of water, detergent, and a commercially available enzyme product. Additionally, the products of pesticide hydrolysis generated by treatment with the enzyme extract were determined to be virtually nontoxic.     

The formation of intramolecular disulfide bridges is required for induction of the Sindbis virus mutant ts23 phenotype.

The Sindbis virus envelope protein spike is a hetero-oligomeric complex composed of a trimer of glycoprotein E1-E2 heterodimers. Spike assembly is a multistep process which occurs in the endoplasmic reticulum (ER) and is required for the export of E1 from the ER. PE2 (precursor to E2), however, can transit through the secretory pathway and be expressed at the cell surface in the absence of E1. Although oligomer formation does not appear to be required for the export of PE2, there is evidence that defects in E1 folding can affect PE2 transit from the ER. Temperature-sensitive mutant ts23 of Sindbis virus contains two amino acid substitutions in E1, while PE2 and capsid protein have the wild-type sequence; however, at the nonpermissive temperature, both E1 and PE2 are retained within the ER and can be isolated in protein aggregates with the molecular chaperone GRP78-BiP. We previously demonstrated that the temperature sensitivity for ts23 was lost as oligomer formation took place at the permissive temperature, suggesting that temperature sensitivity is initiated early in the process of viral spike assembly (M. Carleton and D. T. Brown, J. Virol. 70:952-959, 1996). Experiments described herein investigated the defects in envelope protein maturation that occur in ts23-infected cells and which result in retention of both envelope proteins in the ER. The data demonstrate that in ts23-infected cells incubated at the nonpermissive temperature, E1 folding is disrupted early after synthesis, resulting in the rapid incorporation of both E1 and PE2 into disulfide-stabilized aggregates. Furthermore, the aberrant E1 conformation which is responsible for induction of the ts phenotype requires the formation of intramolecular disulfide bridges formed prior to E1 association with PE2 and the completion of E1 folding.     

Crystal structure of methyl parathion hydrolase from Pseudomonas sp. WBC-3

Methyl parathion hydrolase (MPH, E.C.3.1.8.1), isolated from the soil-dwelling bacterium Pseudomonas sp. WBC-3, is a Zn(II)-containing enzyme that catalyzes the degradation of the organophosphate pesticide methyl parathion. We have determined the structure of MPH from Pseudomonas sp. WBC-3 to 2.4 angstroms resolution. The enzyme is dimeric and each subunit contains a mixed hybrid binuclear zinc center, in which one of the zinc ions is replaced by cadmium. In both subunits, the more solvent-exposed beta-metal ion is substituted for Cd2+ due to high cadmium concentration in the crystallization condition. Both ions are surrounded by ligands in an octahedral arrangement. The ions are separated by 3.5 angstroms and are coordinated by the amino acid residues His147, His149, Asp151, His152, His234 and His302 and a water molecule. Asp255 and a water molecule serve to bridge the zinc ions together. MPH is homologous with other metallo-beta-lactamases but does not show any similarity to phosphotriesterase that can also catalyze the degradation of methyl parathion with lower rate, despite the lack of sequence homology. Trp179, Phe196 and Phe119 form an aromatic cluster at the entrance of the catalytic center. Replacement of these three amino acids by alanine resulted in a significant increase of K(m) and loss of catalytic activity, indicating that the aromatic cluster has an important role to facilitate affinity of enzyme to the methyl parathion substrates.