Acyloin formation by benzoylformate decarboxylase from Pseudomonas putida.

Whole cells and cell extracts of Pseudomonas putida grown in a medium containing ammonium mandelate have the capacity to produce the acyloin compound 2-hydroxypropiophenone when incubated with benzoylformate and acetaldehyde. Benzaldehyde and benzyl alcohol were formed as reaction by-products. The enantiomeric excess of the 2-hydroxypropiophenone product was found to be 91 to 92%. The absolute configuration of the enzymatically prepared product at the carbinol carbon was found to be S. The thiamine PPi-linked enzyme benzoylformate decarboxylase, purified to give a single protein band on polyacrylamide gel electrophoresis, was shown to be responsible for the catalysis of this novel condensation reaction.     

Acyloin formation by benzoylformate decarboxylase from Pseudomonas putida.

Whole cells and cell extracts of Pseudomonas putida grown in a medium containing ammonium mandelate have the capacity to produce the acyloin compound 2-hydroxypropiophenone when incubated with benzoylformate and acetaldehyde. Benzaldehyde and benzyl alcohol were formed as reaction by-products. The enantiomeric excess of the 2-hydroxypropiophenone product was found to be 91 to 92%. The absolute configuration of the enzymatically prepared product at the carbinol carbon was found to be S. The thiamine PPi-linked enzyme benzoylformate decarboxylase, purified to give a single protein band on polyacrylamide gel electrophoresis, was shown to be responsible for the catalysis of this novel condensation reaction.     

Factors affecting 2-hydroxypropiophenone formation by benzoylformate decarboxylase from Pseudomonas putida

Benzoylformate (100 mM) was quantitatively converted to the acyloin compound, 2-hydroxypropiophenone (61.76 mM) and benzaldehyde (38.2 mM) by an enzyme extract from Pseudomonas putida ATCC 12633 in the presence of 1.6M acetaldehyde. Biotransformations were carried out at pH 6.0 and 30 degrees C with an incubation time of 60 min. Activity of the acyloin forming enzyme, benzoylformate decarboxylase, was 1.23 units/mL in the biotransformation mixture. Acyloin formation increased dramatically with pH in the range 4-5 and had a broad activity plateau in the pH range 5-8. A broad temperature optimum for acyloin formation was also observed in the range 20-40 degrees C.     

Improving the carboligase activity of benzoylformate decarboxylase from Pseudomonas putida by a combination of directed evolution and site-directed mutagenesis

Benzoylformate decarboxylase (BFD) from Pseudomonas putida was subjected to directed molecular evolution to generate mutants with increased carboligase activity which is a side reaction of the enzyme. After a single round of random mutagenesis mutants were isolated which exhibited a 5-fold increased carboligase activity in aqueous buffer compared to the wild-type enzyme with a high enantiomeric excess of the product (S)-2-hydroxy-1-phenyl-propanone. From the same library, mutants with enhanced carboligase activity in water-miscible organic solvents have been isolated. The selected mutants have been characterized by sequencing, revealing that all mutants carry a mutation at Leu476, which is close to the active site but does not directly interact with the active center. BFD-L476Q has a 5-fold higher carboligase activity than the wild-type enzyme. L476 was subjected to saturation mutagenesis yielding eight different mutants with up to 5-fold increased carboligase activity. Surprisingly, all L476 mutants catalyze the formation of 2-hydroxy-1-phenyl-propanone with significantly higher enantioselectivity than the wild-type enzyme although enantioselectivity was not a selection parameter. Leu476 potentially plays the role of a gatekeeper of the active site of BFD, possibly by controlling the release of the product. The biocatalyst could be significantly improved for its side reaction, the C-C bond formation and for application under conditions that are not optimized in nature.     

Mandelate pathway of Pseudomonas putida: sequence relationships involving mandelate racemase, (S)-mandelate dehydrogenase, and benzoylformate decarboxylase and expression of benzoylformate decarboxylase in Escherichia coli

The genes that encode the five known enzymes of the mandelate pathway of Pseudomonas putida (ATCC 12633), mandelate racemase (mdlA), (S)-mandelate dehydrogenase (mdlB), benzoylformate decarboxylase (mdlC), NAD(+)-dependent benzaldehyde dehydrogenase (mdlD), and NADP(+)-dependent benzaldehyde dehydrogenase (mdlE), have been cloned. The genes for (S)-mandelate dehydrogenase and benzoylformate decarboxylase have been sequenced; these genes and that for mandelate racemase [Ransom, S. C., Gerlt, J. A., Powers, V. M., & Kenyon, G. L. (1988) Biochemistry 27, 540] are organized in an operon (mdlCBA). Mandelate racemase has regions of sequence similarity to muconate lactonizing enzymes I and II from P. putida. (S)-Mandelate dehydrogenase is predicted to be 393 amino acids in length and to have a molecular weight of 43,352; it has regions of sequence similarity to glycolate oxidase from spinach and ferricytochrome b2 lactate dehydrogenase from yeast. Benzoylformate decarboxylase is predicted to be 499 amino acids in length and to have a molecular weight of 53,621; it has regions of sequence similarity to enzymes that decarboxylate pyruvate with thiamin pyrophosphate as cofactor. These observations support the hypothesis that the mandelate pathway evolved by recruitment of enzymes from preexisting metabolic pathways. The gene for benzoylformate decarboxylase has been expressed in Escherichia coli with the trc promoter, and homogeneous enzyme has been isolated from induced cells.     

Functions of malonate decarboxylase subunits from Pseudomonas putida

Malonate decarboxylase from Pseudomonasputida is composed of five subunits, alpha, beta, gamma, delta, and epsilon. Two subunits, delta and epsilon, have been identified as an acyl-carrier protein (ACP) and malonyl-CoA:ACP transacylase, respectively. Functions of the other three subunits have not been identified, because recombinant subunits expressed in Escherichia coi formed inclusion bodies. To resolve this problem, we used a coexpression system with GroEL/ES from E. coli, and obtained active recombinant subunits. Enzymatic analysis of the purified recombinant subunits showed that the alpha subunit was an acetyl-S-ACP:malonate ACP transferase and that the betagamma-subunit complex was a malonyl-S-ACP decarboxylase.     

Purification and characterization of methioninase from Pseudomonas putida.

Methioninase of Pseudomonas putida was purified to homogeneity, as judged by polyacrylamide gel electrophoresis, with a specific activity 270-fold higher than that of the crude extract. 1. The purified enzyme had an S20,w of 8.37, a molecular weight of 160,000, and an isoelectric point of 5.6. 2. A break in the Arrhenius plot was observed at 40 degrees and the activation energies below and above this temperature were 15.5 and 2.97 kcal per mole, respectively. 3. In addition to L-methionine, various S-substituted derivatives of homocysteine and cysteine could serve as substrates. D-Methionine, 2-oxo-4-methylthiobutanoate, and related non sulfur-containing amino acids were inert. Equimolar formation of alpha-ketobutyrate and CH3SH was observed with methionine as a substrate. 4. In addition to the protein peak at 278 nm, two absorption maxima were observed at 345 and 430 nm at pH 7.5. Hydroxylamine removed the enzyme-bound pyridoxal phosphate, resulting in almost complete resolution with the concomitant disappearance of both peaks. Reconstruction of the treated enzyme could be achieved by addition of the cofactor; the Km value was calculated to be 0.37 muM. 5. The reported purified enzyme should be designated as L-methionine methanethiollyase (deaminating).     

Purification and characterization of adhesive exopolysaccharides from Pseudomonas putida and Pseudomonas fluorescens

In this study, the adhesive exopolysaccharides of strains of Pseudomonas putida and P. fluorescens, both isolated from freshwater epilithic communities, were examined with regard to their chemical composition, biosynthesis, and their role in adhesion. Electron microscopy showed that both strains were enrobed in fibrous glycocalyces and that these structures were involved in attachment of the cells to a solid surface and as structural matrices in the microcolony mode of growth. In batch culture experiments most of the extracellular polysaccharide of both strains was found to be soluble in the growth medium rather than being associated with bacterial cells. Exopolysaccharide was synthesized during all phases of growth, but when growth was limited by exhaustion of the carbon source, exopolysaccharide synthesis ceased whereas exopolysaccharide synthesis continued for some time after cessation of growth in nitrogen-limited cultures. Exopolysaccharide from both strains was isolated and purified. Pseudomonas putida synthesized an exopolysaccharide composed of glucose, galactose, and pyruvate in a ratio of 1:1:1; the P. fluorescens polymer contained glucose, galactose, and pyruvate in a ratio of 1:1:0.5, respectively. Polymers from both strains were acetylated to a variable degree.     

Purification and characterization of glyoxalase I from Pseudomonas putida

Glyoxalase I was purified to apparent homogeneity from Pseudomonas putida. The enzyme was a monomer with a molecular weight of 20,000. The enzyme was most active at pH 8.0. The Km values for methylglyoxal and 4,5-dioxovale-rate are 3.5 mM and 1.2 mM, respectively. Contrary to the case of eukaryotic enzymes, chelating agents showed little inhibitory effects on the enzyme activity. Among the metal ions tested, Zn++ specifically and completely inhibited the activity of the enzyme at a millimolar level. The properties of bacterial glyoxalase I were quite different from mammalian and yeast enzymes.     

Influence of the hydrostatic pressure and pH on the asymmetric 2‐hydroxyketone formation catalyzed by Pseudomonas putida benzoylformate decarboxylase and variants thereof

Benzoylformate decarboxylase (BFD) from Pseudomonas putida is a thiamine diphosphate‐dependent (ThDP) enzyme that catalyzes the asymmetric C? C bond formation to (S)‐2‐hydroxypropiophenone [(S)‐HPP] starting from benzaldehyde and acetaldehyde. The enantioselectivity of BFD was shown to be a function of temperature and substrate concentration. It can additionally be changed by site‐directed mutagenesis on hot spot positions in the active site. In this article, we present the effect of hydrostatic pressure up to 250 MPa on the enantioselectivity for the recombinant wtBFD as well as for the variants BFD F464I, BFD A460I, and BFD A460I‐F464I. A general tendency toward lower amounts of (S)‐HPP could be observed at increasing pressures. For two of these variants an increase in pressure even caused an inversion in the enantioselectivity and thus increasing enantiomeric excesses, respectively. A pressure‐induced increase in enantioselectivity could therefore be observed for the first time in biocatalysis to the best of our knowledge. Furthermore, the pH is shown to be a parameter that also significantly influences the enantioselectivity of the reaction mentioned above. Biotechnol. Bioeng. 2010; 106: 18–26. © 2009 Wiley Periodicals, Inc.     

Kinetics and mechanism of benzoylformate decarboxylase using 13C and solvent deuterium isotope effects on benzoylformate and benzoylformate analogues

Benzoylformate decarboxylase (benzoylformate carboxy-lyase, BFD; EC 4.1.1.7) from Pseudomonas putida is a thiamine pyrophosphate (TPP) dependent enzyme which converts benzoylformate to benzaldehyde and carbon dioxide. The kinetics and mechanism of the benzoylformate decarboxylase reaction were studied by solvent deuterium and 13C kinetic isotope effects with benzoylformate and a series of substituted benzoylformates (pCH3O, pCH3, pCl, and mF). The reaction was found to have two partially rate-determining steps: initial tetrahedral adduct formation (D2O sensitive) and decarboxylation (13C sensitive). Solvent deuterium and 13C isotope effects indicate that electron-withdrawing substituents (pCl and mF) reduce the rate dependence upon decarboxylation such that decreased 13(V/K) effects are observed. Conversely, electron-donating substituents increase the rate dependence upon decarboxylation such that a larger 13(V/K) is seen while the D2O effects on V and V/K are not dramatically different from those for benzoylformate. All of the data are consistent with substituent stabilization or destabilization of the carbanionic intermediate (or carbanion-like transition state) formed during decarboxylation. Additional information regarding the mechanism of the enzymic reaction was obtained from pH studies on the reaction of benzoylformate and the binding of competitive inhibitors. These studies suggest that two enzymic bases are required to be in the correct protonation state (one protonated and one unprotonated) for optimal binding of substrate (or inhibitors).     

Purification and characterization of an enantioselective arylacetonitrilase from Pseudomonas putida

The highly enantioselective arylacetonitrilase of Pseudomonas putida was purified to homogeneity using a combination of (NH₄)₂SO₄ fractionation and different chromatographic techniques. The enzyme has a molecular weight of 412 kDa and consisted of approximately nine to ten identical subunits (43 kDa). The purified enzyme exhibited a pH optimum of 7.0 and temperature optimum of 40°C. The nitrilase was highly susceptible to thiol-specific reagents and metal ions and also required a reducing environment for its activity. These reflected the presence of a catalytically essential thiol group for enzyme activity which is in accordance with the proposed mechanism for nitrilase-catalyzed reaction. The enzyme was highly specific for arylacetonitriles with phenylacetonitrile and its derivatives being the most preferred substrates. Higher specificity constant (k _cat/K _m) values for phenylacetonitrile compared to mandelonitrile also revealed the same. Faster reaction rate achieved with this nitrilase for mandelonitrile hydrolysis was possibly due to the low activation energy required by the protein. Incorporation of low concentration (<5%) of organic solvent increased the enzyme activity by increasing the availability of the substrate. Higher stability of the enzyme at slightly alkaline pH and ambient temperature provides an excellent opportunity to establish a dynamic kinetic resolution process for the production of (R)-(−)-mandelic acid from readily available mandelonitrile.     

Oxaloacetate decarboxylase from Pseudomonas stutzeri: purification and characterization

Oxaloacetate decarboxylase (OXAD), the enzyme that catalyzes the decarboxylation of oxaloacetate to pyruvic acid and carbon dioxide, was purified 245-fold to homogeneity from Pseudomonas stutzeri. The three-step purification procedure comprised anion-exchange chromatography, metal-chelate affinity chromatography, and biomimetic-dye affinity chromatography. Estimates of molecular mass from sodium dodecyl sulfate-polyacrylamide gel electrophoresis and native high-performance gel-filtration liquid chromatography were, respectively, 63 and 64 kDa, suggesting a monomeric protein. OXAD required for maximum activity divalent metal cations such as Mn2+ and Mg2+ but not monovalent cations. The enzyme is not inhibited by avidin, but is competitively inhibited by adenosine 5'-diphosphate, acetic acid, phosphoenolpyruvate, malic acid, and oxalic acid. Initial velocity, product inhibition, and dead-end inhibition studies suggested a rapid-equilibrium ordered kinetic mechanism with Mn2+ being added to the enzyme first followed by oxaloacetate, and carbon dioxide is released first followed by pyruvate. Inhibition data as well as pH-dependence profiles and kinetic parameters are reported and discussed in terms of the mechanism operating for oxaloacetate decarboxylation.     

Purification and crystallization of benzoylformate decarboxylase.

A new large-scale purification method for benzoylformate decarboxylase from Pseudomonas putida has allowed us to undertake an X-ray crystallographic study of the enzyme. The previously observed instability of the enzyme was overcome by addition of 100 microM thiamine pyrophosphate to buffers used in the purification. The final enzyme preparation was more than 97% pure, as determined by denaturing gel electrophoresis and densitometry. The mobility of the enzyme on a gel filtration column indicates that it is a tetramer of 57-kDa subunits. Large, single crystals of benzoylformate decarboxylase were grown from solutions of buffered polyethylene glycol 400, pH 8.5. The crystals diffract to beyond 1.6 A resolution and are stable for days to X-ray radiation. Analysis of X-ray data from the crystals, along with the newly determined quaternary structure, identifies the space group as I222. The unit cell dimensions are a = 82 A, b = 97 A, c = 138 A. An average Vm value for the crystals is consistent with one subunit per asymmetric unit. The subunits of the tetramer must be arranged with tetrahedral 222 symmetry.     

Isolation and characterization of toluene-sensitive mutants from Pseudomonas putida IH-2000

Two toluene-sensitive mutants were generated from Pseudomonas putida IH-2000, the first known toluene-tolerant isolate, by Tn5 transposon mutagenesis. These mutants were unable to grow in the presence of toluene (log P_ow 2.8) but they could grow in medium overlaid with organic solvents having a log P_ow value higher than that of toluene such as p-xylene (log P_ow 3.1), cyclohexane (log P_ow 3.4) and n-hexane (log P_ow 3.9). The Tn5 transposable element knocked out a cyoB-like gene in one mutant and a cyoC-like gene in the other mutant. Seven open reading frames were found in a 5.5-kb region containing the cyoB- and cyoC-like genes of strain IH-2000. ORFs 3–7 showed significant identity to the cyoABCDE gene products of Escherichia coli, but ORFs 1 and 2 showed no significant homology to any protein reported so far. The growth patterns of the Tn5 mutants with the inactivated cyo-like gene were similar to that of the wild-type strain in the absence of organic solvents, although the doubling times were slightly longer than that of the wild-type strain. Our findings indicate that cyo is an important gene for toluene tolerance, although its role is still unclear.     

Isolation and characterization of Pseudomonas putida R-prime plasmids

A number of enhanced chromosome mobilizing (ECM) plasmids derived from the wide host range plasmid R68 have been used to construct R-prime plasmids carrying a maximum of two map minutes of the Pseudomonas putida PPN chromosome, using Pseudomonas aeruginosa PAO as the recipient. For one ECM plasmid, pMO61, the ability to form R-primes did not correlate with the ability to mobilize chromosomes in intrastrain crosses, suggesting that different mechanisms are involved. Physical analysis of one R-prime showed that 3.5 kb of chromosomal DNA had been inserted between the tandem IS21 sequences carried by the parent ECM plasmid.     

Molecular characterization of Rifr mutations in Pseudomonas aeruginosa and Pseudomonas putida

The rpoB gene encoding for β subunit of RNA polymerase is a target of mutations leading to rifampicin resistant (Rif^r) phenotype of bacteria. Here we have characterized rpoB/Rif^r system in Pseudomonas aeruginosa and Pseudomonas putida as a test system for studying mutational processes. We found that in addition to the appearance of large colonies which were clearly visible on Rif selective plates already after 24 h of plating, small colonies grew up on these plates for 48 h. The time-dependent appearance of the mutant colonies onto selective plates was caused by different levels of Rif resistance of the mutants. The Rif^r clusters of the rpoB gene were sequenced and analyzed for 360 mutants of P. aeruginosa and for 167 mutants of P. putida. The spectrum of Rif^r mutations characterized for P. aeruginosa grown at 37 °C and that characterized for P. putida grown at 30 °C were dissimilar but the differences almost disappeared when the mutants of both strain were isolated at the same temperature, at 30 °C. The strong Rif^r phenotype of P. aeruginosa and P. putida was accompanied only with substitutions of these residues which belong to the putative Rif-binding pocket. Approximately 70% of P. aeruginosa mutants, which were isolated at 37 °C and expressed weak Rif^r phenotype, contained base substitutions in the N-terminal cluster of the rpoB gene. The differences in the spectra of mutations at 30 °C and 37 °C can be explained by temperature-sensitive growth of several mutants in the presence of rifampicin. Thus, our results imply that both the temperature for the growth of bacteria and the time for isolation of Rif^r mutants from selective plates are critical when the rpoB/Rif^r test system is employed for comparative studies of mutagenic processes in Pseudomonas species which are conventionally cultivated at different temperatures.