Staining with Fluorescein Diacetate Correlates with Hepatocyte Function

To establish the importance of fluorescein diacetate (FDA) as a viability stain for cultured hepatocytes. we hypothesized that FDA staining would correlate positively with hepatocyte viability and function. Mixtures of live and dead cells were stained with FDA and scanned by flow cytometry. A close correlation was observed between the live cell fraction and percent viability as determined by FDA staining (R² = 0.962). Hepatocytes were also sorted into low fluorescence and high fluorescence groups. Both albumin production and lidocaine metabolism (P-450 activity) were significantly increased in the high fluorescence group compared to the low fluorescence group. An automated, fluorescence-activated assay was useful for rapid assessment of hepatocyte viability. In addition. the intensity of green fluorescence following staining with FDA correlated well with two specific measures of hepatocyte function.     

A Method for Producing Dust-, Streak- and Hole-Free Formvar Films in Laboratories Having High Atmospheric Humidity

To establish the importance of fluorescein diacetate (FDA) as a viability stain for cultured hepatocytes. we hypothesized that FDA staining would correlate positively with hepatocyte viability and function. Mixtures of live and dead cells were stained with FDA and scanned by flow cytometry. A close correlation was observed between the live cell fraction and percent viability as determined by FDA staining (R² = 0.962). Hepatocytes were also sorted into low fluorescence and high fluorescence groups. Both albumin production and lidocaine metabolism (P-450 activity) were significantly increased in the high fluorescence group compared to the low fluorescence group. An automated, fluorescence-activated assay was useful for rapid assessment of hepatocyte viability. In addition. the intensity of green fluorescence following staining with FDA correlated well with two specific measures of hepatocyte function.     

Potential problems with fluorescein diacetate assays of cell viability when testing natural products for antimicrobial activity.

There are two potential problems in the use of fluorescein diacetate (FDA) as a measure of cell viability. The first is the hydrolysis of FDA to fluorescein in the absence of live cells and the second is the quenching of fluorescence by assay solutions. We show that common media components such as tryptone, peptone and yeast extract all promote hydrolysis of FDA in the absence of live cells, as do Tris-HCl and sodium phosphate buffers. As a consequence, various microbiological media promote hydrolysis of FDA in the absence of live cells. Different media were also shown to reduce the amount of visible fluorescence of fluorescein. Diluting the medium decreases the background hydrolysis of FDA as well as increases the amount of visible fluorescence. Both problems should be considered when using FDA as an indicator of cell viability when testing natural products for antimicrobial activity.     

The isolation, culture and division of protoplasts from citrus cotyledons

High yields (2.3 × 10⁵ to 1.3 × 10⁶ protoplasts/g.f.wt.) of isolated protoplasts were obtained from cotyledons of Cirus sinensis (L.) Osb. 'Valencia'. Osmotic potential of the medium and enzyme concentrations were important in obtaining high viability of preparations as indicated by FDA fluorescence. Adding malt extract to a Murashige-Tucker basal medium increased plating efficiencies somewhat, but not the rate or duration of cell division. However, modifying the NAA and kinetin concentration optimized plating efficiencies (up to 20%) of protoplasts and also the rate or duration of cell division. The highest plating efficiency and number of cells per colony were obtained on a defined medium containing NAA (15 μ M ). and kinetin (4.6 μ M ). Coincidence of percentage protoplast viability after 13 days (assessed by FDA fluorescence) with plating efficiency after 21 days indicates that FDA fluorescence is an accurate indicator of citrus protoplast viability.     

Applicability of the fluorescein diacetate assay for metabolic activity measurement of Microcystis aeruginosa (Chroococcales,Cyanobacteria)

The fluorescein diacetate (FDA) assay has been widely used to measure metabolic activity in phytoplankton. It was found that FDA fluorescence values did not decrease in some stressed cells, demonstrating that the applicability of the method needs to be assessed further in the context of growth‐influencing conditions. In the present study, changes of FDA fluorescence values were studied in bloom‐forming cyanobacterial Microcystis aeruginosa Kütz cells under stress conditions such as nitrogen (N) or phosphorus (P) deficiency, or darkness and low temperature (10°C), respectively. The results demonstrated that esterase activity decreased immediately in dark‐stressed cells, which correlated with the decline of biomass and photosynthetic activity. Under the other three stress conditions, however, especially at low temperature, the cells lost photosynthetic activity but had the highest esterase activity, which was five times higher than the control group. These findings contrast with the assay criteria that the expression of a stain should reflect the change of photosynthetic activity and that stressed cells should have a lower staining intensity than the control cells. According to these results, the esterase activity response was dependent on environmental factors. Furthermore, higher fluorescence intensity did not mean higher metabolic activity, but a discrepant value indicated a severe stress.     

Reliability of cartilage digestion and FDA–EB fluorescence staining for the detection of chondrocyte viability in osteochondral grafts

The purpose of this study is to evaluate the reliability of cartilage digestion and fluorescein diacetate-ethidium bromide (FDA–EB) fluorescence staining for the detection of chondrocyte viability in osteochondral grafts. Sixteen fresh osteochondral grafts were harvested from pig knee condyles, and the articular cartilage tissue was preserved. Each cartilage graft was cut into two 70-µm thick pieces and randomly allocated to Group A or Group B. The cell viability of Group A was detected using FDA–EB fluorescence staining of the digested cartilage, and the viability of Group B was detected with FDA–EB fluorescence staining of cartilage sections. Comparisons of chondrocyte viability and correlation analyses of the two groups were performed using the paired sample t test and Pearson correlation test, respectively. No significant difference was found in the chondrocyte viability between Groups A and B (p > 0.05), and a strong correlation was observed (r = 0.70, p < 0.05). Therefore, cartilage digestion with FDA–EB fluorescence staining is a reliable method for detecting chondrocyte viability in osteochondral grafts.     

Classification of phytoplankton cells as live or dead using the vital stains fluorescein diacetate and 5‐chloromethylfluorescein diacetate

Regulations for ballast water treatment specify limits on the concentrations of living cells in discharge water. The vital stains fluorescein diacetate (FDA) and 5‐chloromethylfluorescein diacetate (CMFDA) in combination have been recommended for use in verification of ballast water treatment technology. We tested the effectiveness of FDA and CMFDA, singly and in combination, in discriminating between living and heat‐killed populations of 24 species of phytoplankton from seven divisions, verifying with quantitative growth assays that uniformly live and dead populations were compared. The diagnostic signal, per‐cell fluorescence intensity, was measured by flow cytometry and alternate discriminatory thresholds were defined statistically from the frequency distributions of the dead or living cells. Species were clustered by staining patterns: for four species, the staining of live versus dead cells was distinct, and live‐dead classification was essentially error free. But overlap between the frequency distributions of living and heat‐killed cells in the other taxa led to unavoidable errors, well in excess of 20% in many. In 4 very weakly staining taxa, the mean fluorescence intensity in the heat‐killed cells was higher than that of the living cells, which is inconsistent with the assumptions of the method. Applying the criteria of ≤5% false negative plus ≤5% false positive errors, and no significant loss of cells due to staining, FDA and FDA+CMFDA gave acceptably accurate results for only 8–10 of 24 species (i.e., 33%–42%). CMFDA was the least effective stain and its addition to FDA did not improve the performance of FDA alone.     

Culture conditions and the development of the photosynthetic mechanism; influence of light intensity on photosynthetic characteristics of Chlorella

1. Chlorella pyrenoidosa has been grown in a continuous-culture apparatus under various light intensities provided by incandescent lamps, other conditions of culture being maintained constant. Light intensity curves for cells immersed in the No. 11 Warburg buffer and in Knop''s solution + 4.4 per cent CO₂ at a saturating light intensity were determined as characteristics of the photosynthetic mechanism. These characteristics were referred to the centrifuged cell volume as an index of quantity of cellular material. 2. Cells grown at intensities in the range of about 35 f.-c. develop a capacity for a high rate of photosynthesis (c.mm. O₂/hour/c.mm. cells). At culture intensities above or below this range the cells produced have a lower capacity for photosynthesis. A similar effect is observed for rate of photosynthesis per unit dry weight or rate per unit cell nitrogen. 3. The rate of photosynthesis per cell or rate per unit chlorophyll shows no maximum at any light intensity of culture but increases continuously throughout the range of light intensities studied. 4. Maximum rate of growth is attained at a light intensity of about 100 f.-c. The hypothesis is advanced that at culture intensities above that needed to give maximum rate of growth (100 f.-c.) a mechanism is developed which opposes the photosynthetic process and removes the photosynthetic products. 5. The low capacity for photosynthesis shown by cells grown at culture intensities below 35 f.-c. finds no immediate explanation. 6. The shape of the light intensity curve is markedly affected by the light intensity at which the cells have been cultured. Cells grown at lower intensities give light intensity curves approaching the Blackman type with a short transitional region between light limitation and light saturation.     

Use of fluorescein diacetate for research on macrophage activation

Kinetic of changes in the fluorescence intensity of macrophages in a medium containing fluorescein diacetate (FDA) has been analysed. It is shown that under certain conditions the intensity of macrophages retains a constant level for rather a long time. The addition of stimulants such as lipopolysaccharide or tuftsin to the incubation medium leads to characteristic changes in the cell fluorescence level related to the increase in the activity of FDA intracellular hydrolyses and fluorescein efflux from macrophages. It is concluded that the kinetic of changes in the macrophages fluorescence intensity in a medium with FDA may serves as a test for detecting early functional changes upon macrophage activation.     

Accurate and rapid viability assessment of Trichoderma harzianum using fluorescence-based digital image analysis

Fluorescence microscopy and image analysis were evaluated in order to assess the viability of Trichoderma harzianum, an economically important filamentous fungus. After the evaluation of the two most commonly used fluorochromes, acridine orange (AO) and fluorescein diacetate (FDA) as metabolic indicator stains, AO gave ambiguous results and therefore FDA was chosen. The lower stability at room temperature and fast fluorescence intensity decay (50% after only 30 s of illumination in UV light) could be overcome by the use of a digital image acquisition system including frame grabber and a video camera. Fresh (live) fungal hyphae emitted bright green fluorescence when stained with this dye (7.5 microg/L), whereas a total absence of fluorescence was observed when using sterilized (dead) fungal cells. Fresh cells were subjected to different lethal and sublethal treatments and the percentage of FDA stained fluorescent hyphae was then measured over the total hyphal area (% of FDA-stained area) by image analysis. At the same time, samples were cultivated in shake flasks in order to correlate this % of FDA-stained area with its growth rate, a functional indicator of viability. The linear correlation (r = 0.979) was: growth rate (g/L x h) = 2.25 x 10(-3) (% of FDA-stained area). This method was used to evaluate the viability of the fungus under two different fermentation conditions in a 10-L bioreactor. Estimated viable biomass during fermentation was strongly influenced by the process conditions. The use of FDA, with computer-aided quantitative image analysis, has made it possible to rapidly and reliably quantify the viability of T. harzianum.     

Development of a molecular bioswitch using fluorescence lifetime imaging: Incremental activation of fluorescein diacetate

Molecular bioswitches offer an invaluable asset in the shift from systemic to targeted treatments. Within the growing arsenal of switches are imaging probes that functionalize only in given locations or situations. Acetate esters are a common fluorescent example, known to activate upon interaction with esterases. Fluorescein diacetate (FDA) is one such fluorophore used in cell viability assays. These assays rely on the fact that the compound begins colorless and with no fluorescent signature whatsoever, and only after internalization into cells it is possible to detect a fluorescence signal. In this study, using fluorescence intensity (FI) and fluorescence lifetime (FLT) imaging, FDA is shown to be fluorescent even when unactivated. Furthermore, the FLT is shown to change with pH. Finally, the ability to image FDA in different environments simulated by tissue‐imitating phantoms is explored. Altogether, the ability of FDA to serve as a bioswitch when measured using FLT imaging microscopy (FLIM) is assessed. The combination of a spectrum of FDA activation and FLIM serves as a bioswitch, where biologically relevant stimulation can generate detectable and incremental variations.      

Rapid viability assessment of spores of several fungi by an ionic intensified fluorescein diacetate method

Fluorescein diacetate (FDA) was applied to the viability assessment of spores of Aspergillus niger, Rhizopus stolonifer, Fusarium oxysporum, and Penicillium citrinum. The fluorescence of individual cells was quantitated with a charge coupled device (CCD) detector. When staining was carried out in a phosphate buffer solution (10 mM, pH 7.0), weak or no fluorescence was emitted from viable spores of A. niger and R. stolonifer, which made it difficult to distinguish between viable (nontreated) and nonviable (heat treated at 90°C for 30 min) spores. The addition of NaCl, KCl, or MgCl₂ to the staining solution caused an increase in the fluorescence intensity of A. niger viable spores, from which nonviable spores could be distinguished. The same effect of NaCl was observed in staining the spores of other species.     

Evidence for substantial maintenance of membrane integrity and cell viability in normally developing grape (Vitis vinifera L.) berries throughout development

Fluorescein diacetate (FDA) was used as a vital stain to assaymembrane integrity (cell viability) in mesocarp tissue of thedeveloping grape (Vitis vinifera L.) berry in order to testthe hypothesis that there is a substantial loss of compartmentationin these cells during ripening. This technique was also usedto determine whether loss of viability was associated with symptomsof a ripening disorder known as berry shrivel. FDA fluorescenceof berry cells was rapid, bright, and stable for over 1 h atroom temperature. Confocal microscopy detected FDA stainingthrough two to three intact surface cell layers (300–400µm) of bisected berries, and showed that the fluorescencewas confined to the cytoplasm, indicating the maintenance ofintegrity in both cytoplasmic as well as vacuolar membranes,and the presence of active cytoplasmic esterases. FDA clearlydiscriminated between living cells and freeze-killed cells,and exhibited little, if any, non-specific staining. Propidiumiodide and DAPI, both widely used to assess cell viability,were unable to discriminate between living and freeze-killedcells, and did not specifically stain the nuclei of dead cells.For normally developing berries under field conditions therewas no evidence of viability loss until about 40 d after veraison,and the majority (80%) of mesocarp cells remained viable pastcommercial harvest (26 °Brix). These results are inconsistentwith current models of grape berry development which hypothesizethat veraison is associated with a general loss of compartmentationin mesocarp cells. The observed viability loss was primarilyin the locule area around the seeds, suggesting that a localizedloss of viability and compartmentation may occur as part ofnormal fruit development. The cell viability of berry shrivel-affectedberries was similar to that of normally developing berries untilthe onset of visible symptoms (i.e. shrivelling), at which timeviability declined in visibly shrivelled berries. Berries withextensive shrivelling exhibited very low cell viability (15%). Key words: Apoplast, berry shrivel, compartmentation, DAPI, FDA, fluorescence, fruit ripening, locule, propidium iodide Received 19 September 2007; Revised 16 December 2007 Accepted 26 December 2007     

Effect of UV-C irradiation on mesophyll protoplasts of Cucumis sativus

In the present work we studied the effect of UV-C irradiation on short-term protoplast physiology, with the aim of identifying and assessing parameters which can provide valuable information for asymmetric fusion experiments. Protoplast viability, cell wall regeneration, density of cell suspension and intensity of DAPI signal were followed by using microscopy and by the detection of specific fluorescent or spectroscopic signals in a microplate reader. The control and irradiated mesophyll protoplasts of Cucumis sativus were used for this experiment. In contrast to control cells, viability of irradiated cells significantly decreased. Intensive cell wall regeneration was observed only in control cells, which also showed significantly higher DAPI fluorescence signal. Microscopy for determination of viability by FDA and cell wall regeneration by Calcofluor White were modified for microplate reader instrumentation. These methods are simple, fast and suitable for detection of the effectiveness of UV-C irradiation of cells intended to be used in asymmetric fusion experiments.     

Photophysical properties of Prochlorococcus marinus SS120 divinyl chlorophylls and phycoerythrin in vitro and in vivo

Prochlorococcus marinus SS120 is an ecologically important and biochemically intriguing marine cyanobacterium. In addition to divinyl chlorophylls (DV-Chls) a and b it possesses a particular form of phycoerythrin (PE), but no other phycobilins and therefore no complete phycobilisomes. Here, a spectroscopic characterisation of these DV-Chls and PE is provided. Comparison of fluorescence quantum yields, excited state lifetimes and absorption characteristics indicate similar light-harvesting properties of the DV-Chls as their monovinyl counterparts. PE, which is present only in tiny amounts, was purified and considerably enriched. A phycourobilin to phycoerythrobilin ratio of 3:1 chromophores per (alphabeta) PE monomer is suggested. The in vitro fluorescence lifetime of PE is 1.74 ns. In vivo time-resolved fluorescence measurements with synchrotron radiation were used to investigate the possible role of PE in light-harvesting. The fluorescence decay time for PE is about 550 ps, indicating an unusually slow excitation energy transfer. The decay time slowed to 1 ns after addition of glycerol to cell cultures. The contribution of PE to total light-harvesting capacity was estimated to be about one (alphabeta) PE monomer per 330 DV-Chl b molecules. Thus, the capacity of PE to function primarily as a photosynthetic light-harvesting pigment in P. marinus SS120 is low.     

A planar interdigitated ring electrode array via dielectrophoresis for uniform patterning of cells

Uniform patterning of cells is highly desirable for most cellular studies involving cell-cell interactions but is often difficult in an in vitro environment. This paper presents the development of a collagen-coated planar interdigitated ring electrode (PIRE) array utilizing positive dielectrophoresis to pattern cells uniformly. Key features of the PIRE design include: (1) maximizing length along the edges where the localized maximum in the electric field exists; (2) making the inner gap slightly smaller than the outer gap in causing the electric field strength near the center of a PIRE being generally stronger than that near the outer edge of the same PIRE. Results of human hepatocellular carcinoma cells, HepG2, adhered on a 6x6 PIRE array show that cells patterned within minutes with good uniformity (48+/-6 cells per PIRE). Cell viability test revealed healthy patterned cells after 24h that were still confined to the collagen-coated PIREs. Furthermore, quantification of fluorescence intensity of living cells shows an acceptable reproducibility of cell viability among PIREs (mean normalized intensity per PIRE was 1+/-0.138). The results suggest that the PIRE array would benefit applications that desire uniform cellular patterning, and improve both response and reproducibility of cell-based biosensors.     

The life and death of sponge cells

Cell viability is an essential touchstone in the study of the effect of medium components on cell physiology. We developed a flow-cytometric assay to determine sponge-cell viability, based on the combined use of fluorescein diacetate (FDA) and propidium iodide (PI). Cell fluorescence measurements based on incubation of cells with FDA or PI resulted in a useful and reproducible estimate of the viability of primary sponge-cell cultures. We studied the effects of temperature, ammonium, and the fungicide amphotericin B on the viability of a primary-cell culture from the marine sponge Suberites domuncula using the aforementioned flow-cytometric assay. S. domuncula cells die rapidly at a temperature of >or=22 degrees C, but they are insensitive to ammonium concentrations of up to 25 mM. Amphotericin B, which is frequently used in sponge-cell culture media, was found to be toxic to S. domuncula cells.     

Dark Respiration Protects Photosynthesis Against Photoinhibition in Mesophyll Protoplasts of Pea (Pisum sativum)

The optimal light intensity required for photosynthesis by mesophyll protoplasts of pea (Pisum sativum) is about 1250 microeinsteins per square meter per second. On exposure to supra-optimal light intensity (2500 microeinsteins per square meter per second) for 10 min, the protoplasts lost 30 to 40% of their photosynthetic capacity. Illumination with normal light intensity (1250 microeinsteins per square meter per second) for 10 min enhanced the rate of dark respiration in protoplasts. On the other hand, when protoplasts were exposed to photoinhibitory light, their dark respiration also was markedly reduced along with photosynthesis. The extent of photoinhibition was increased when protoplasts were incubated with even low concentrations of classic respiratory inhibitors: 1 micromolar antimycin A, 1 micromolar sodium azide, and 1 microgram per milliliter oligomycin. At these concentrations, the test inhibitors had very little or no effect directly on the process of photosynthetic oxygen evolution. The promotion of photoinhibition by inhibitors of oxidative electron transport (antimycin A, sodium azide) and phosphorylation (oligomycin) was much more pronounced than that by inhibitors of glycolysis and tricarboxylic acid cycle (sodium fluoride and sodium malonate, respectively). We suggest that the oxidative electron transport and phosphorylation in mitochondria play an important role in protecting the protoplasts against photoinhibition of photosynthesis. Our results also demonstrate that protoplasts offer an additional experimental system for studies on photoinhibition.     

Detection of respiratory enzyme activity in Giardia cysts and Cryptosporidium oocysts using redox dyes and immunofluorescence techniques.

The fluorescent redox dye 5-cyano-2,3-ditolyl tetrazolium chloride (CTC), combined with fluorescein-labeled antibodies, was tested for the simultaneous detection of the respiratory electron transport system (ETS) activity and enumeration of Giardia cysts and Cryptosporidium oocysts by spectral microfluorometry and epifluorescence microscopy. The reduction of CTC and p-iodonitrotetrazolium violet (INT), a non-fluorescent redox dye, was compared with propidium iodide (PI) and fluorescein diacetate (FDA) for the measurements of Giardia cyst viability over time. According to the PI and FDA staining techniques, nearly 60% of the cysts tested viable at the beginning of the observations; after 21 days their viability decreased to 5%. The redox dyes indicated that approximately 4-10% of the cysts were metabolically active 48 h after they were shed, followed by a decline in enzyme activity to near undetectable levels after 4 days. Spectral analysis on individual cysts indicated that the fluorescence emission of the reduced CTC and the fluorescein-labeled antibodies is distinctive for each compound and suitable for their simultaneous determination by microphotometry, flow cytometry and epifluorescence microscopy. The fluorescence signal remained without alteration when the cysts were transferred onto microscope slides coated with an optical embedding medium and stored at -20 degrees C. The fluorescence intensity of the reduced CTC, when properly standardized, can provide quantitative measurements of ETS activity of the cysts. This is the first report of a method to determine enzyme redox activity on intact cysts applicable to water, laboratory and animal samples.     

Role of cyanide-resistant respiration during light-induced attraction of predators to herbivore-infested leaves

The present work showed that spider mite-infested leaves placed in the light were more attractive to predatory mites than the infested leaves placed in the dark; furthermore, an increase in the light intensity enhanced this attractiveness. However, the increase of the light intensity did not change the attractiveness of the uninfested leaves to predatory mites. The capacity of cyanide-resistant respiration and the photosynthetic rates of both the infested and uninfested leaves increased with increasing light intensities, whereas the photosystem (PS) II chlorophyll (Chl) fluorescence decreased. The increase of the capacity of cyanide-resistant respiration in the infested leaves was more dramatic than that in the uninfested leaves, whereas the values of photosynthetic rates and Chl fluorescence were lower in the infested leaves than those in the uninfested leaves. Treatment of the infested and uninfested leaves with 1 mM salicylhydroxamic acid (SHAM, an inhibitor of cyanide-resistant respiration) decreased photosynthetic rates and caused further reductions in PSII fluorescence, especially under a higher light intensity. In contrast, the effects of SHAM on PSII fluorescence parameters and photosynthetic rates of the infested leaves were more dramatic than on those of the uninfested leaves. The treatment with SHAM did not significantly change the attractiveness of the infested or uninfested leaves to the predatory mites under all of the light intensities tested. These results indicated that cyanide-resistant respiration was not directly associated with the light-induced attraction of predators to plants, but it could play a role in the protection of photosynthesis. Such role might become relatively more important when photosynthesis is impaired by herbivores infestation.