Modification of aminoallenylidene complexes of chromium via exchange of the C3-bound amino group

The aminoallenylidene(pentacarbonyl)chromium complexes [(CO)₅CrCCC(NR¹R²)Ph] (1a-c) react with dimethylamine by addition of the amine to the C1C2 bond of the allenylidene ligand to give alkenyl(amino)carbene complexes [(CO)₅CrC(NMe₂)CHC(NR¹R²)Ph] (2a-c) (R¹ = Me: R² = Me (a), Ph (b); R¹ = Et: R² = Ph (c)). In contrast, addition of a large excess (usually 20 equivalents) of ammonia or primary amines, H₂NR, to solutions of [(CO)₅CrCCC(NMe₂)Ph] (1a) affords the aminoallenylidene complexes [(CO)₅CrCCC(NHR)Ph] (1d-w) in which the dimethylamino group is replaced by NH₂ or NHR, respectively. In addition to simple amines such as methylamine, butylamine, and aniline, amines carrying a functional group (allylamine, propargylamine) and amino acid esters as well as amino terpenes and amino sugars can be used to displace the NMe₂ substituent. Usually the Z isomer (with respect to the partial C3-N double bond) is formed exclusively. Products derived from addition of H₂NR to the C1C2 bond of 1a are not observed. The amino group in 1d-w is rapidly deprotonated by excess of amine to form iminium alkynyl chromates [1d-w]⁻, thus protecting 1d-w from addition of free amine to either C3 or across the C1C2 bond. The iminium alkynyl chromates are readily reprotonated by acids or by chromatography on wet SiO₂ to reform 1d-w.     

Ferrocenyl-substituted allenylidene complexes of chromium, molybdenum and tungsten: Synthesis, structure and reactivity

Bis(ferrocenyl)-substituted allenylidene complexes, [(CO)₅MCCCFc₂] (1a-c, Fc = (C₅H₄)Fe(C₅H₅), M = Cr (a), Mo (b), W (c)) were obtained by sequential reaction of Fc₂CO with Me₃Si-CCH, KF/MeOH, n-BuLi, and [(CO)₅M(THF)]. For the synthesis of related mono(ferrocenyl)allenylidene chromium complexes, [(CO)₅CrCCC(Fc)R] (R = Ph, NMe₂), three different routes were developed: (a) reaction of the deprotonated propargylic alcohol HCCC(Fc)(Ph)OH with [(CO)₅Cr(THF)] followed by desoxygenation with Cl₂CO, (b) Lewis acid induced alcohol elimination from alkenyl(alkoxy)carbene complexes, [(CO)₅CrC(OR)CHC(NMe₂)Fc], and (c) replacement of OMe in [(CO)₅CrCCC(OMe)NMe₂] by Fc. Complex 1a was also formed when the mono(ferrocenyl)allenylidene complex [(CO)₅CrCCC(Fc)NMe₂] was treated first with Li[Fc] and the resulting adduct then with SiO₂. The replacement route (c) was also applied to the synthesis of an allenylidene complex (7a) with a CC spacer in between the ferrocenyl unit and C_γ of the allenylidene ligand, [(CO)₅CrCCC(NMe₂)-CCFc]. The related complex containing a CHCH spacer (9a) was prepared by condensation of [(CO)₅CrCCC(Me)NMe₂] with formylferrocene in the presence of NEt₃. The bis(ferrocenyl)-substituted allenylidene complexes 1a-c added HNMe₂ across the C_α-C_β bond to give alkenyl(dimethylamino)carbene complexes and reacted with diethylaminopropyne by regioselective insertion of the CC bond into the C_β-C_γ bond to afford alkenyl(diethylamino)allenylidene complexes, [(CO)₅MCCC(NEt₂)CMeCFc₂]. The structures of 5a, 7a, and 9a were established by X-ray diffraction studies.     

Oxidovanadium(IV) complexes containing ligands derived from dithiocarbazates - Models for the interaction of VO with thiofunctional ligands

The tetragonal-pyramidal VO²⁺ complexes [VO{(RSC-S)N-NX}₂] (1-6) were synthesised by the reactions of VO(OCHMe₂)₃ with the dithiocarbazate ligands RSC(S)-NH-NX, where X = cyclo-pentyl, cyclo-hexyl or 4-Me₂N-C₆H₄-CH, and R = CH₃ or CH₂C₆H₅. The compounds were characterised by elemental analysis, IR- and mass spectrometries, and in cases of compounds 1, 3, 4 and 5, by X-ray diffraction. The chiral compound 4 (X = cyclo-hexyl, R = CH₂C₆H₅) crystallises in the C configuration. In compound 5, the VO moiety is disordered (83.3:16.7%) with respect to the plane spanned by the four equatorial ligand functions.     

Reactivity of alkynyl Pd(II) azido complexes toward organic isocyanides, isothiocyanates, and nitriles

Alkynyl Pd(II) azido complexes of the type [Pd(N₃)(CCR)L₂] (1-3) were obtained by reactions of aqueous NaN₃ with [Pd(Cl)(CCR)L₂] (R = Ph or C(O)OMe). Treating compounds 1-3 with organic isocyanides (R-NC) afforded novel complexes, trans-[Pd(CCPh)(NCNR)(PMe₃)₂] (R = 2,6-Me₂C₆H₃ (4) or 2,6-Et₂C₆H₃ (5)) and trans-[Pd(CCR)(CN₄-t-Bu)L₂] (6: L = PMe₃, R = Ph; 7: L = PEt₃, R = C(O)OMe; 8: L = PMe₃, R = C(O)OMe), which contain either a carbodiimido or a C-coordinated tetrazolato group. Reactions of compounds 1 and 2 with R-NCS (R = 2,6-Me₂C₆H₃ or CH₂CH₃) and 1,4-phenylene diisothiocyanate (C₆H₄(NCS)₂) smoothly proceeded to give tetrazole-thiolato complexes, trans-[Pd(CCPh)(SCN₄-R)L₂] (L = PMe₃, R = Et (9) or 2,6-Me₂C₆H₃ (10); L = PEt₃, R = 2,6-Me₂C₆H₃ (11)), and a phenylene-bridged dinuclear Pd(II) tetrazole-thiolato complex, [(PEt₃)₂(CCPh)Pd(SCN₄-(μ-C₆H₄)-SCN₄)Pd(CCPh)(PEt₃)₂] (12), respectively. Complexes 9-12 contain the Pd-S bond that is formed by the dipolar cycloaddition of the organic isothiocyanate to the Pd-azido bond. In contrast, the corresponding reactions of compounds 1and 2 with C₆F₅CN and Me₃SiCN (organic nitriles, R-CN) gave an N-coordinated Pd(II)-tetrazolato compound {trans-[Pd(CCPh)(N₄C-C₆F₅)(PMe₃)₂] (13)} and a mixture of Pd(II)-cyano complexes {trans-[Pd(CCPh)(CN)(PEt₃)₂] (14) and [Pd(CN)₂(PEt₃)₂] (15)}, respectively. Bis(phosphine) bis(cyano) complexes of Pd and Ni, [M(CN)₂L₂] (L = PEt₃, PMe₃; L₂ = DEPE), could be obtained independently by the reactions of [M(N₃)₂L₂] with excess Me₃SiCN in organic solvents.     

Synthesis and characterization of triphenylphosphine stabilized silver α,β-unsaturated carboxylate: Crystal structure of [Ag(O2CCHC(CH3)2)(PPh3)2]

A series of triphenylphosphine coordinated silver α,β-unsaturated carboxylates of type [Ag(O₂CR)(PPh₃)_n: n = 1, R = CH₃CHCH (2a), (CH₃)₂CCH (2b), CH₃CH₂CHCH (2c), CH₃CH₂CH₂CHCH (2d), PhCHCH (2e), CH₂CH (2f); n = 2, CH₃CHCH (3a), (CH₃)₂CCH (3b), CH₃CH₂CHCH (3c), CH₃CH₂CH₂CHCH (3d)] were prepared by reaction of relative silver carboxylates (1a-1f) with triphenylphosphine in chloroform. These complexes were obtained in high yields and characterized by elemental analysis, ¹H NMR, ¹³C NMR, ³¹P NMR and IR spectroscopy. Thermal stability of the complexes has been determined by TG analysis. The molecular structure of [Ag((O₂CCHC(CH₃)₂))(PPh₃)₂] (3b) shows that the senecioato ligand is chelated with silver atom and generate, a distorted tetrahedron.     

Synthesis and structural diversity of 2-pyridylmethylideneamine complexes of zinc(II) chloride

The addition reactions of zinc(II) chloride to N-substituted pyridine-2-carbaldimines [Py-CHNR, R = Me (1a), Ph (1b), Bz (1c), allyl (1d)] lead to different complexes dependent on the N-bound substituent R. The 1:1 complexes show molecular structures of the type [(Py-CHNR)ZnCl₂] for R = methyl (2a), phenyl (2b), and allyl (2d) with a distorted tetrahedral environment for the zinc atom. The zinc complex with the N-methylated pyridine-2-carbaldimine also forms a dimer of the type [(Py-CHNR)ZnCl₂]₂ (2a)₂ with a square pyramidal coordination sphere of zinc. A 3:2 stoichiometry is observed for R = benzyl and an ion pair of the type [Zn(Py-CHNR)₃]²⁺ [ZnCl₄]²⁻ (2c) is found in the solid state.     

A new cumulene diiron complex related to the active site of Fe-only hydrogenases and its phosphine substituted derivatives: synthesis, electrochemistry and structural characterization

A new cumulene diiron complex related to the Fe-only hydrogenase active site [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₆] (1) was obtained by treatment of (μ-LiS)₂Fe₂(CO)₆ with excess 1,4-dichloro-2-butyne. By controllable CO displacement of 1 with PPh₃ and bis(diphenylphosphino)methane (dppm), mono- and di-substituted complexes, namely [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₅L] (2: L = PPh₃; 3: L = dppm) and [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₄L₂] (4: L = PPh₃; 5: L = dppm) could be prepared in moderate yields. Treatment of 1 with bis(diphenylphosphino)ethane (dppe) afforded a double butterfly complex [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₅]₂(μ-dppe) (7). With dppm in refluxing toluene, a dppm-bridged complex [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₄(μ-dppm)] (6) was obtained. These model complexes were characterized by IR, ¹H, ³¹P NMR spectra and the molecular structures of 1, 2 and 5-7 were determined by single crystal X-ray analyses. The electrochemistry of 1-3 was studied and the electrocatalytic property of 1 was investigated for proton reduction in the presence of HOAc.     

Novel stable five-coordinate diorgano cobalt(III) complexes: Formation, structure, and reaction with carbon monoxide

A series of new five-coordinate acyl vinyl cobalt(III) complexes Co{η¹-C(CCPh)CHPh}[C(O)CCO] L₂(L = PMe₃) (6-10) were prepared via formal insertion of diphenylbutadiyne into Co-H function of mer-octahedral hydrido-acyl(phenolato)-cobalt(III) complexes. The complexes are diamagnetic. One square pyramidal structure of complex 6 was confirmed by X-ray diffraction analysis. These complexes are stable in solid state. In solution, six-coordinate acyl vinyl carbonyl cobalt(III) complex 11 is approved through the reaction of complex 7 with CO and the structure of complex 11 was determined by X-ray method.     

Synthesis and structures of bimetallic silicon-containing imido alkylidene complexes of molybdenum Me2Si[CHMo(NAr)(ORF3)2]2 and PhVinSi[CHMo(NAr)(ORF3)2]2

Bimetallic alkylidene complexes of molybdenum (R_F3O)₂(ArN)MoCH-SiMe₂-CHMo(NAr)(OR_F3)₂ (1) and (R_F3O)₂(ArN)MoCH-SiPhVin-CHMo(NAr)(OR_F3)₂ (2) (Ar = 2,6-C₆H₃; R_F3 = CMe₂CF₃) have been prepared by the reactions of vinyl silicon reagents Me₂Si(CHCH₂)₂ and PhSi(CHCH₂)₃ with known alkylidene compound PhMe₂C-CHMo(NAr)(OR_F3)₂. Complexes 1 and 2 were structurally characterized. Ring opening metathesis polymerization (ROMP) of cyclooctene using compounds 1 and 2 as initiators led to the formation of high molecular weight polyoctenamers with predominant trans-units content in the case of 1 and predominant cis-units content in the case of 2.     

Iridium(III)-vinylidene chemistry: Conversion of an iridacyclopentadiene-chlorido complex and terminal alkynes to iridacyclopentadiene-vinyl complexes

The reactions of [κ²(C¹,C⁴)-CRCRCRCR](PPh₃)₂Ir(Cl) (9, R = CO₂Me) with propargyl alcohol derivatives (2-propyn-1-ol, 2-methyl-3-butyn-2-ol, 1-ethynylcyclopentanol, and 1-ethynylcyclooctanol), in the presence of water leads to the formation of iridium(III)-vinyl complexes bearing the general structure [κ²(C¹,C⁴)-CRCRCRCR](PPh₃)₂Ir(CO)(κ¹-vinyl) where vinyl = -CHCH₂, -(E)-CHCHMe, -CHC(CH₂)₄, or -CHC(CH₂)₇. In these, the CO ligand was derived from the terminal carbon of the starting alkyne and the oxygen atom from water. Under anhydrous conditions, 9 undergoes reaction with 2-propyn-1-ol to give trimethyl 1,3-dihydro-3-oxo-4,5,6-isobenzofurantricarboxylate, the result of a cycloaromatization/transesterification involving the buta-1,3-dien-1,4-diyl ligand in 9 and 2-propyn-1-ol.     

Synthesis and reactivity of five- and six-coordinate hydrido(vinyl) iridium(III) complexes

The reaction of the dihydrido iridium(III) precursor [IrH₂(Cl)(PiPr₃)₂] (5) with internal alkynes RCC(CO₂Me) (R = Me, CO₂Me) afforded the five-coordinate hydrido(vinyl) complexes [IrH(Cl){(E)-C(R)CH(CO₂Me)}(PiPr₃)₂] (6, 7), via insertion of the alkyne into one of the IrH bonds. Compounds 6 and 7 are also accessible by careful hydrogenation of the alkyne iridium(I) derivatives trans-[IrCl{RCC(CO₂Me)}(PiPr₃)₂] (9, 10), the latter being prepared from in situ generated trans-[IrCl(C₈H₁₄)(PiPr₃)₂] and RCC(CO₂Me). UV irradiation of 6 (R = CO₂Me) led to the formation of the isomer [IrH(Cl){κ²(C,O)-C(CO₂Me)CHC(OMe)O}(PiPr₃)₂] (3) having the vinyl ligand coordinated in a bidentate fashion. While 6 reacted with acetonitrile and CO to afford the six-coordinate iridium(III) compounds [IrH(Cl){(E)-C(CO₂Me)CH(CO₂Me)}(L′)(PiPr₃)₂] (11, 12), treatment of 6 with LiC₅H₅ gave the half-sandwich-type complex [(η⁵-C₅H₅)IrH{(E)-C(CO₂Me)CH(CO₂Me)}(PiPr₃)] (13) by, the loss of one PiPr₃. The reaction of 3 with CO under pressure resulted in the formation of [IrH(Cl){(Z)-C(CO₂Me)CH(CO₂Me)}(CO)(PiPr₃)₂] (14) in which, in contrast to the stereoisomer 12, the two CO₂Me substituents are trans disposed.     

Diffusion NMR studies on neutral and cationic square planar palladium(II) complexes

Diffusion NMR investigations were carried out in CD₂Cl₂ for a series of neutral (1-7) and cationic (8-10) square planar palladium complexes. Diffusion data were elaborated through a modified Stokes-Einstein equation that takes into account the size and shape of molecules. The hydrodynamic volume at infinite dilution of all complexes was found to be similar to the crystallographic volume and always much larger than the van der Waals volume. The self-aggregation tendency of [Pd(N,C⁻)(N,N)][PF₆] ionic complexes [(N,C⁻) = (C₆H₄-(Ph)C(O)-CN-Et); 8, (N,N) = 2,2′-bipirydine; 9, (N,N) = (2,6-(iPr)₂-C₆H₃)NC(Me)-C(Me)N(2,6-(iPr)₂-C₆H₃); 10, (N,N) = (2,6-(iPr)₂-C₆H₃)NC(R′)-C(R′)N(2,6-(iPr)₂-C₆H₃), R′₂ = naphthalene-1,8-diyl] was investigated by performing ¹H and ¹⁹F diffusion experiments as a function of the concentration. Clear evidence for the formation of ion triples containing two cationic units was obtained for 8, most likely due to the establishment of a weak Pd?O interaction. The tendency to form ion triples was much reduced in 9 and 10, having an increased steric hindrance in the apical positions. While 9 showed the usual tendency to afford a mixture of free ions and ion pairs, solvated ions were the predominant species in the case of 10 even at high concentration values (approaching 100 mM).     

Synthesis and structures of copper and gold complexes of the P,N ligands RNC(Bu)C(H)RPPh2 (R = SiMe3, H)

The reaction of the chelating P,N ligand RNC(Bu^t)CH(R)PPh₂ (R = SiMe₃) (1) with CuCl and CuCl₂ (probably by way of reduction to Cu(I) by the phosphine ligand) or Cu(NCCH₃)₄ClO₄ yielded the dimeric 1:1 complex [Cu{PPh₂CH(R)C(Bu^t)NR}Cl]₂ (2) or the monomeric 2:1 complex [Cu{PPh₂CH(R)C(Bu^t)NR}₂]ClO₄ (3), respectively. The presence of trace amounts of water during the reaction resulted in the successive cleavage of the two trimethylsilyl groups of the ligand and the formation of the monomeric chelate complexes [Cu{PPh₂CH(R)C(Bu^t)NH}₂]ClO₄ (4) and [Cu{PPh₂CH₂C(Bu^t)NH}₂]ClO₄ (5). Oxidation of 5 by atmospheric oxygen led to small quantities of the blue Cu(II) complex [Cu{(O)PPh₂CH₂C(Bu^t)NH}₂](ClO₄)₂ (6). The dimeric gold complexes [Au{PPh₂CH₂C(Bu^t)NH}]₂X₂ (X = BF₄, ClO₄) (7) were similarly obtained from the previously described Au{PPh₂CH(R)C(Bu^t)NR}Cl by replacing the covalently bound chlorine with the weakly coordinating anions in the presence of small quantities of water. The solution and solid state structures (except 5) of all complexes were determined by NMR spectroscopy and X-ray crystallography.     

A closer look at the phosphorus-phosphorus double bond lengths in meta-terphenyl substituted diphosphenes

The single crystal X-ray structure of DmpPPDmp (1, Dmp = 2,6-Mes₂C₆H₃), which was previously reported to have a relatively short PP bond distance of 1.985(2) Å at room temperature, has been reexamined at variable temperatures. Crystallographic analyses of 1 at 100 K allow for resolution of disorder of the two phosphorus atoms (which is unresolvable from room temperature diffraction data), and for determination of a more conventional PP bond length of 2.029(1) Å. Single crystals of the closely related diphosphene DxpPPDxp (2, Dxp = 2,6-(2,6-Me₂C₆H₃)₂C₆H₃) show similar disorder in one of two crystallographically independent molecules in the unit cell. A value of 2.0276(4) Å is found for the non-disordered PP bonds at 100 K for 2. A new diphosphene Ar′PPAr′ (3, Ar′ = 2,6-Mes₂-4-OMe-C₆H₃) has been prepared and its structure has also been examined. The PP bond length for 3 was determined to be 2.0326(9) Å and relatively free of the effects of disorder.     

Mononuclear and dinuclear iridium and heterodinuclear iridium-rhodium complexes derived from 1,4-C6H4(CCSiMe3)2 as precursor

The labile iridium(I) precursor trans-[IrCl(C₈H₁₄)(PiPr₃)₂] (2), prepared in situ from [IrCl(C₈H₁₄)₂]₂ (1) and PiPr₃, reacted with equimolar amounts of 1,4-C₆H₄(CCSiMe₃)₂ (3) at 60 °C to give the mononuclear vinylidene complex trans-[IrCl(CC(SiMe₃)C₆H₄CCSiMe₃)(PiPr₃)₂] (4). From 2 and 3 in the molar ratio of 2:1, the dinuclear compound trans,trans-[(PiPr₃)₂ClIr(CC(SiMe₃)C₆H₄C(SiMe₃)C)IrCl(PiPr₃)₂] (5) was obtained. Reaction of 4 with [RhCl(PiPr₃)₂]₂ (6) at room temperature afforded the heterodinuclear alkyne(vinylidene) complex trans,trans-[(PiPr₃)₂ClIr(CC(SiMe₃)C₆H₄CCSiMe₃)RhCl(PiPr₃)₂] (7), which on heating at 45 °C was converted to the bis(vinylidene) isomer trans,trans-[(PiPr₃)₂ClIr(CC(SiMe₃)C₆H₄C(SiMe₃)C)RhCl(PiPr₃)₂] (8).     

Ketimine synthesis in the coordination sphere of thallium (I)

[AuTl(C₆F₅)₂(en)] (en = ethylenediamine) reacts with cyclic ketones as cyclopentanone (Cy⁵O), cyclohexanone (Cy⁶O) or cycloheptanone (Cy⁷O) in 1:1 or 1:2 molar ratio leading to products of stoichiometry [AuTl(C₆F₅)₂{Cy^xN(CH₂)₂NH₂}] (x = 5 1, 6 2 or 7 3), or [AuTl(C₆F₅)₂{Cy^xN(CH₂)₂NCy^x}] (x = 5 4, 6 5 or 7 6). Addition of ethylenediamine to the ketimine complexes in chloroform regenerates [AuTl(C₆F₅)₂(en)], the starting material, and the free ketimines, as their NMR and mass spectra evidenced. The ketimine complexes display luminescence in solid state at room temperature and at 77 K at higher wavelengths than the diamine starting product (505 nm). The excited states responsible for this behaviour are assigned to orbitals due to the gold-thallium interactions.     

Synthesis and solid-state structures of (triphos)iridacyclopentadiene complexes as models for vinylidene intermediates in the [2 + 2 + 1] cyclotrimerization of alkynes

The iridium 1,1,1-tris(diphenylphosphinomethyl)ethane (triphos) complexes [{κ²(C¹,C⁴)-CRCRCRCR}{CH₃C(CH₂PPh₂)₃}Ir(NCMe)]BF₄ (2-NCMe, R = CO₂Me) and [{κ²(C¹,C⁴)-CRCRCRCR}{CH₃C(CH₂PPh₂)₃}Ir(CO)]BF₄ (2-CO, R = CO₂Me) serve as models for proposed iridium-vinylidene intermediates of relevance to the [2 + 2 + 1] cyclotrimerization of alkynes. The solid-state structures of 2-NCMe, 2-CO, and [κ²(C¹,C⁴)-CRCRCRCR]{CH₃C(CH₂PPh₂)₃}Ir(Cl) (2-Cl), were determined by X-ray crystallography.     

Experimental and theoretical study of the arrangement, electronic structure and properties of neutral paramagnetic binuclear nitrosyl iron complexes with azaheterocyclic thyolyls having ‘S-C-N type’ coordination of bridging ligands

Geometrical and electronic structures of neutral paramagnetic binuclear nitrosyl iron complexes with azaheterocyclic thyolyls [Fe₂(μ-SR)₂)(NO)₄] with bridging ligands: aminomercaptotriazolyl, RC₂N₃H(NH₂) (1), mercaptoimidazolyl, RC₃N₂H₃ (2), methylmercaptoimidazolyl, RC₃N₂H₂CH₃ (3), and dihydromercaptoimidazolyl, RC₃N₂H₅ (4) have been calculated by the methods of density functional, B3LYP and PBE. Coordination of bridging ligands corresponds to ‘S-C-N type’, more energetically preferable than μ-S type coordination. This results in big Fe?Fe distances, with the value of intramolecular exchange interaction being inconsiderable; therefore the complexes are paramagnetic at ambient temperature, with effective magnetic moment about 2.5 Bohr magneton. The interaction of the Fe atoms spins and intermolecular exchange are antiferromagnetic, and this should be taken into account while describing the temperature dependence of magnetic susceptibility. The electronic configuration of the Fe(NO)₂ unit with one unpaired electron (similar to that in binuclear diamagnetic complexes) forms due to binding of spin 3/2 of Fe⁺d⁷ center with oppositely oriented spins 1/2 of two NO groups. Theoretical approaches describe satisfactorily not only the experimental structure of the complexes but also their IR spectra.     

Platinum(II) halide complexes of PPh2(CFCF2) and PPh2(CClCF2). The synthesis and crystal structure of [PtI(μ-I){PPh2(CXCF2)}]2, (X = F, Cl); the first crystallographically characterised iodide-bridged platinum(II) phosphine dimers

The reactions of the fluorovinyl-substituted phosphines PPh₂(CFCF₂) and PPh₂(CClCF₂), with K₂PtX₄ (X = Br, I) have been investigated. The resulting complexes have been characterized by a combination of ¹⁹F and ³¹P{¹H} NMR, IR and Raman spectroscopy. The reactions of these phosphines with K₂PtBr₄ yield the monomeric complexes cis-[PtBr₂{PPh₂(CFCF₂)}₂] (1) and trans-[PtBr₂{PPh₂(CClCF₂)}₂] (2), respectively, whilst the reactions with K₂PtI₄ yield both the monomeric species trans-[PtI₂{PPh₂(CXCF₂)}₂], {X = F (3), Cl (4)}, and the dimeric species [PtI(μ-I){PPh₂(CXCF₂)}]₂, {X = F (5), Cl (6)}. The dimers 5 and 6 represent the first crystallographically characterised platinum(II) iodide-bridged phosphine complexes, and both adopt the symmetric-trans structure.     

Alkoxy-substituted group 6 allenylidene complexes - Synthesis and properties

Bis(alkoxy)allenylidene complexes, [(CO)₅MCCC(OR′)OR], as well as mono(alkoxy)allenylidene complexes, [(CO)₅MCCC(OR′)Ph], of chromium and tungsten are accessible from propynones [HCCC(O)Ph] or propynoic acid esters [HCCC(O)OR; R = Et, (−)-menthyl, endo-bornyl] by the following reaction sequence: (a) deprotonation of the alkynes, (b) reaction with [(CO)₅M-THF] (M = Cr, W), and (c) alkylation of the resulting alkynyl metallate, [(CO)₅MCCC(O)R], with Meerwein salts. Vinylidene complexes, [(CO)₅MCC(R′)C(O)OR], are formed as a by-product by C_β-alkylation of the alkynyl metallate. Dimethylamine displaces one alkoxy substituent of the bis(alkoxy)allenylidene complexes to give dimethylamino(alkoxy)allenylidene complexes, [(CO)₅MCCC(OR)NMe₂]. The analogous reaction of dimethylamine with a mono(alkoxy)-substituted allenylidene complex affords the aminoallenylidene complex [(CO)₅CrCCC(NMe₂)Ph]. When the amine is used in large excess, the α,β-unsaturated aminocarbene complex [(CO)₅CrC(NMe₂)C(H)C(NMe₂)Ph] is additionally formed by addition of the amine across the C_αC_β-bond of the allenylidene ligand. The reaction of [(CO)₅MCCC(OEt)₂] with dimethyl ethylenediamine offers access to bis(amino)allenylidene complexes, in which C_γ is part of a five-membered heterocycle. Photolysis of bis(alkoxy)allenylidene complexes in the presence of triphenylphosphine yields tetracarbonyl- and tricarbonyl{bis(phosphine)}allenylidene complexes. Diethylaminopropyne inserts into the C_βC_γ bond of [(CO)₅MCCC(OEt)OMethyl] to give alkenylallenylidene complexes. Subsequent acid-catalyzed intramolecular cyclization affords a pyranylidene complex.