6-Halogenopyridin-2-olato complexes with the diruthenium(2+) core: Equilibria between head-to-head and head-to-tail structures

The dinuclear bis(6-X-pyridin-2-olato) ruthenium complexes [Ru₂(μ-XpyO)₂(CO)₄(PPh₃)₂] (X = Cl (4B) and Br (5B)), [Ru₂(μ-XpyO)₂(CO)₄(CH₃CN)₂] (X = Cl (6B), Br (7B) and F (8B)) and [Ru₂(μ-ClpyO)₂(CO)₄(PhCN)₂] (9B) were prepared from the corresponding tetranuclear coordination dimers [Ru₂(μ-XpyO)₂(CO)₄]₂ (1: X = Cl; 2: X = Br) and [Ru₂(μ-FpyO)₂(CO)₆]₂ (3) by treatment with an excess of triphenylphosphane, acetonitrile and benzonitrile, respectively. In the solid state, complexes 4B-9B all have a head-to-tail arrangement of the two pyridonate ligands, as evidenced by X-ray crystal structure analyses of 4B, 6B and 9B, in contrast to the head-to-head arrangement in the precursors 1-3. A temperature- and solvent-dependent equilibrium between the yellow head-to-tail complexes and the red head-to-head complexes 4A-7A and 9A, bearing an axial ligand only at the O,O-substituted ruthenium atom, exists in solution and was studied by NMR spectroscopy. Full ¹H and ¹³C NMR assignments were made in each case. Treatment of 1 and 2 with the N-heterocyclic carbene (NHC) 1-butyl-3-methylimidazolin-2-ylidene provided the complexes [Ru₂(μ-XpyO)₂(CO)₄(NHC)], X = Cl (11A) or Br (12A). An XRD analysis revealed the head-to-head arrangement of the pyridonate ligands and axial coordination of the carbene ligand at the O,O-substituted ruthenium atom. The conversion of 11A and 12A into the corresponding head-to-tail complexes was not possible.     

Binuclear manganese(III) complexes of an unsymmetric pyrazolate-based compartmental ligand with hard donor set

The synthesis, crystal structure and magnetic properties of manganese(III) binuclear complexes [Mn^III₂(L-3Н)₂(CH₃ОH)₄]·2CH₃ОH (1) and [Mn^III₂(L-3Н)₂(Py)₄]·2Py (2) (L = 3-[(1E)-N-hydroxyethanimidoyl]-4-methyl-1H-pyrazole-5-carboxylic acid) are reported. The ligand contains two distinct donor compartments formed by the pyrazolate-N and the oxime or the carboxylic groups. The complexes were characterized by X-ray single crystal diffraction, revealing that both 1 and 2 consist of dinuclear units in which the two metal ions are linked by double pyrazolate bridges with a planar {Mn₂N₄} core. Cryomagnetic measurements show antiferromagnetic interaction with g = 1.99, J = −3.6 cm⁻¹, Θ = −2.02 K for 1 and g = 2.00, J = −3.7 cm⁻¹, Θ = 1.43 K for 2.     

A family of titanium (IV) alkoxo complexes with N,O and O,O chelating ligands. Crystal structure of [Ti(O-i-Pr)2{2-(−)-menthoxo-pyridine}2]

In view of the wide applicability and versatility of titanium based Lewis acids in selective organic synthesis including asymmetric synthesis, we have synthesized a family of mono and polyatomic titanium derivatives. The polymetallic complexes prepared are bridged by pyridimine, quinone and triazine based ligands. The synthesis of [{Ti(O-i-Pr)₃(Oddbf)}₂] (1), [Ti(O-i-Pr)₂(Oddbf)₂] (2), [{Ti(O-i-Pr)₂(Oddbf)(OMent)}₂] (3) (ddbfO = 2,3-dihydro-2,2-dimethyl-benzofuranoxo; MentO = (1R,2S,5R)-(−)-menthoxo), [{Ti(O-i-Pr)₃(OMenpy)}₂] (4), [Ti(O-i-Pr)₂(OMenpy)₂] (5) (MenpyO = (1S,2S,5R)-(−)-menthoxo-pyridine); [{(Ti(OR)₃)₂L}_n] (RO = isopropoxo, (1R,2S,5R)-(−)-menthoxo) (6-11) and [{(Ti(O-i-Pr)₃)₃L}_n] (12) was accomplished from a Lewis acid such as Ti(O-i-Pr)₄, [{Ti(O-i-Pr)₃(OMent)}₂] or [Ti(OMent)₄] and chelating ligands (ddbfOH = 2,3-dihydro-2,2-dimethyl-benzofuranol; MenpyOH = (1R,2S,5R)-(−)-5-methyl-2-isopropyl-1-(2′-pyridinyl)cyclohexan-1-ol; LH₂ = 4,6-dihydroxy-2,5-diphenyl-pyrimidine, 2,4-dihydroxy-5,6-dimethyl-pyrimidine, 5,8-dihydroxy-1,4-napthoquinone, 2,5-dihydroxy-1,4-benzoquinone and LH₃ = cyanuric acid) that provide a rigid framework for the metal centre. The molecular structure of 5 has been determined by single crystal X-ray diffraction studies.     

Synthesis, structure, and catalytic activity of chiral Cu(II) and Ag(I) complexes with (S,S)-1,2-diaminocyclohexane-based N4-donor ligands

Condensation of (S,S)-1,2-cyclohexanediamine with 2 equiv. of 2-pyridine carboxaldehyde in toluene in the presence of molecular sieves at 70 °C gives N,N′-bis(pyridin-2-ylmethylene)-(S,S)-1,2-cyclohexanediamine (S,S-1) in 95% yield. Reduction of 1 with an excess of NaBH₄ in MeOH at 50 °C gives N,N′-bis(pyridin-2-ylmethyl)-(S,S)-1,2-cyclohexanediamine (S,S-2) in 90% yield. Reaction of 1 or 2 with 1 equiv. of CuCl₂ · 2H₂O in methanol gives complexes [N-(pyridin-2-ylmethylene)-(S,S)-1,2-cyclohexanediamine]CuCl₂ (3) and [Cu(S,S-2)(H₂O)]Cl₂ · H₂O (4), respectively, in good yields. Complex 4 can further react with 1 equiv. of CuCl₂ · 2H₂O in methanol to give [Cu(S,S-2)][CuCl₄] (5) in 75% yield. The rigidity of the ligand coupled with the steric effect of the free anion plays an important role in the formation of the helicates. Treatment of ligand S,S-1 with AgNO₃ induces a polymer helicate {[Ag(S,S-1)][NO₃]}_n (6), while reaction of ligand 2 with AgPF₆ or AgNO₃ in methanol affords a mononuclear single helicate [Ag(S,S-2)][PF₆] (7) or a dinuclear double helicate [Ag₂(S,S-2)₂][NO₃]₂ · 2CH₃OH (8) in good yields, respectively. All compounds have been characterized by various spectroscopic data and elemental analyses. Compounds 1, 3-5, 7 and 8 have been further subjected to single-crystal X-ray diffraction analyses. The Cu(II) complexes do not show catalytic activity for allylation reaction, in contrast to Ag(I) complexes, but they do show catalytic activity for Henry reaction (nitroaldol reaction) that Ag(I) complexes do not.     

Antisymbiosis. Preferential coordination of anionic oxygen versus neutral sulfur donor atoms of methylsulfanyl- or methylsulfinyl-acetato, 2-benzoato and 2-phenolato to the cis-Pt(PPh3)2 and Pt(dppe) residues

The interaction of an excess of the title ligands L⁻ with the cis-Pt(phos)₂ moieties gives compounds a-bcis-[Pt(L-O)₂(phos)₂] (a, phos = P(Ph)₃; b, phos = 1/2 dppe), in which O- is preferred to S-coordination. Such preference is confirmed by the fact that the same products are obtained by reaction of excess of L⁻ with the previously reported a-d complexes [Pt(L-O,S)(phos)₂]⁺, (c, phos = PPh₃, d, phos = 1/2 dppe), for which chelate ring opening occurs with rupture of Pt-S rather than Pt-O bonds. Compound a can be obtained also by oxidative addition of HL to [Pt(PPh₃)₃]. The Pt-O bonds in compounds a-d are stable towards substitution by Me₂SO, pyridine and tetramethylthiourea. Substitution of L’s occurs with N,N′-diethyldithiocarbamate, which forms a very stable chelate with Pt(II). Thiourea and N,N′-dimethylthiourea also react, because they give rise to cyclometallated products [Pt(phos)₂(NRC(S)NHR)]⁺ (R = H, CH₃), with one ionised thioamido group, as revealed by an X-ray investigation of [Pt(PPh₃)₂(NHC(S)NH₂)]⁺. The preference of O versus S coordination, as well as the stability of the Pt-O bonds, are discussed in terms of antisymbiosis.     

Hydrothermal synthesis, crystal structure and magnetic characterization of three hexa-M substituted tungstoarsenates (M = Ni, Zn and Mn)

Three novel hexa-transition-metal complexes substituted tungstoarsenates, [Ni₆(imi)₆(B-α-H₃AsW₉O₃₃)₂]·2H₂O (1), [Zn₆(imi)₆(B-α-H₃AsW₉O₃₃)₂]·2H₂O (2) and [Mn₆(imi)₆(B-α-H₃AsW₉O₃₃)₂]·4H₂O (3) (imi = imidazole), have been synthesized hydrothermally without using any polyoxoanion as precursor and characterized by elemental analyses, IR, TG and X-ray single-crystal diffraction. Compounds 1-3 are isostructural, composed of [B-α-H₃AsW₉O₃₃]¹²⁻ anions and [M₆(imi)₆]¹²⁺ complex cations (M = Ni, Zn and Mn), all M atoms are square pyramidal geometry, and held together to form hexagonal metallocycles by edge-sharing oxygen atoms. In compounds 2 and 3, [M₆(imi)₆(B-α-AsW₉O₃₃)₂] (M = Zn, Mn) segments act as 12-connected nodes to form complicated 3D network via hydrogen-bonding interactions, respectively. Magnetic measurements for 1 show the presence of ferromagnetic interactions within the hexanuclear Ni²⁺ cations.     

Out-of-plane dimeric Mn quadridentate Schiff-base complexes: Synthesis, structure and magnetic properties

Four Mn^III quadridentate Schiff-base compounds have been prepared and structurally characterized: [Mn(salpn)(CH₃OH)₂]BPh₄ (1), [Mn₂(salpn)₂(N₃)₂] (2), [Mn₂(salpn)₂(NCS)₂] (3), [Mn₂(salpn)₂(H₂O)₂](H₂O)(ClO₄)₂ (4) (salpn = N,N′-(1,2-propylene)-bis-(salicylideneiminate)). Among them, 1 is a discrete Mn^III monomeric complex with a square-bipyramidal geometry. Complexes 2, 3 and 4 form the similar phenolate-bridged out-of-plane dimers. Magnetic susceptibility studies reveal that 2, 3 and 4 all exhibit ferromagnetic intra-dimer coupling between Mn^III ions.     

Synthesis, characterization, and cytotoxicity of trimethylplatinum(IV) complexes with 2-thiocytosine and 1-methyl-2-thiocytosine ligands

The reaction of [PtMe₃(MeOH)(bpy)][BF₄] (1) with the thionucleobases 2-thiocytosine (SCy, 2) and 1-methyl-2-thiocytosine (1-MeSCy, 3) resulted in the formation of the complexes [PtMe₃(bpy)(SCy-κS)][BF₄] (4) and [PtMe₃(bpy)(1-MeSCy-κS)] [BF₄] (5), respectively. The complexes were characterized by ¹H and ¹³C NMR spectroscopy as well as by single-crystal X-ray analyses of 4 · MeOH and 5. In 4 · MeOH two strong hydrogen bonds (N4-H?N3′: N4?N3′ 2.976(7) Å) between the thiocytosine ligands give rise to base pairing thus forming dinuclear cations [{PtMe₃(bpy)(SCy-κS)}₂]²⁺. In both complexes the platinum atom is octahedrally coordinated [PtC₃N₂S] by three methyl ligands, the 2,2′-bipyridine ligand and the κS coordinated nucleobase (configuration index: OC-6-33). The structural investigations gave evidence that the sulfur atoms of the nucleobase ligands in 4 · MeOH and 5 have to be regarded as sp³ and sp² hybridized, respectively. Thus, the ligand in 4 · MeOH has to be considered as the deprotonated thiol-amino form of thiocytosine being reprotonated at N1. In complex 5 the 1-MeSCy is coordinated in its thione-amino form. DFT-calculations of the base-paired dinuclear cation in 4 as well as of 4 itself gave proof of the strength of the hydrogen bond (8.5 kcal/mol) and exhibited that cation-anion interactions influence the conformation of the complex. In vitro cytotoxicity studies of 4 and 5 using nine different human tumor cell lines revealed moderate cytotoxic activity.     

Electrochemical behavior of S,S-bridged adducts of square planar metalladithiolene complexes [M(S2C2Ph2)2](M=Ni, Pd, and Pt)

The electrochemical behavior of the S,S^′-bridged adducts of square planar metalladithiolene complexes was investigated by using cyclic voltammetry and electrochemical spectroscopies (visible, near-IR, and ESR). The norbornene-bridged S,S^′-adduct [Ni(S₂C₂Ph₂)₂(C₇H₈)] (2a; C₇H₈=norbornene) formed by [Ni(S₂C₂Ph₂)₂] (1a) and quadricyclane (Q) was dissociated by an electrochemical reduction, and anion 1a⁻ and norbornadiene (NBD) were formed. Q was isomerized to NBD in the overall reaction. The o-xylyl-bridged S,S^′-adduct [Ni(S₂C₂Ph₂)₂(CH₂)₂(C₆H₄)] (3a; (CH₂)₂(C₆H₄)=o-xylyl) was also dissociated by an electrochemical reduction, and this reaction gave the o-xylyl radical (o-quinodimethane). The reduction of complex 3a in the presence of excess o-xylylene dibromide underwent the catalytic formation of o-quinodimethane. The butylene-bridged S,S^′-adduct [Ni(S₂C₂Ph₂)₂(CH₂)₄] (4a; (CH₂)₄=butylene) was stable on an electrochemical reduction. The lifetimes of reduced species of these adducts 2a-4a were influenced by the stability of the eliminated group (stability: NBD > o-xylyl radical (o-quinodimethane) > butylene radical). Therefore, the reduced species are stable in the sequence 4a⁻ > 3a⁻ > 2a⁻. Although the palladium complex [Pd(S₂C₂Ph₂)₂] (1b) was easier to reduce than the nickel complex 1a or the platinum complex [Pt(S₂C₂Ph₂)₂] (1c), their S,S^′-adducts were easier to reduce in the order of Ni adduct > Pd adduct > Pt adduct.     

Synthesis, structure and reactivity of complexes containing [M(S2)2] fragments (M=Ru, Os; (S2)=1,2-benzenedithiolate (2−))

Subsequent addition of 1,2-benzenedithiol (S₂-H₂) and nBuLi to a solution of [Ru(NO)Cl₃ · xMeOH] in THF afforded exclusively the monomeric species NBu₄[Ru^II(NO)(S₂)₂] (1). Formation of dimeric (NBu₄)₂[Ru^II(NO)(S₂)₂]₂ (2) has been confirmed when the deprotonated ligand S₂-Li₂ was added to [Ru(NO)Cl₃ · xMeOH] and allowed to stir for 30 h. The monomer 1 undergoes aerial oxidation to give (NBu₄)₂[Ru^IV(S₂)₃] (3). The reaction between RuCl₃ · xH₂O and S₂-H₂ in the presence of NaOMe, afforded the dinulear Ru^III species (NMe₄)₂[Ru^III(S₂)₂]₂ (4). A modified method for the preparation of 1 is being employed to synthesize the osmium analogue NBu₄[Os(NO)(S₂)₂] (5) effectively. The solid state structures of 1, 2 and 3 were determined by X-ray crystal structure analysis. A comparison of relevant bond distance data suggests that 1,2-benzenedithiolate acts as an “innocent” ligand.     

Manganese(II) complexes with V-shaped sulfonyldibenzoate: The 3D structures with interpenetrated threefold or tetra-nuclear manganese(II) units

Five Mn^II-sdba coordination polymers with mono-, di-, tri-, tetra-nuclear cores based on the V-shaped 4,4′-dicarboxybiphenyl sulfone (H₂sdba) ligands: [Mn(sdba)(phen)₂(H₂O)]_n·3nH₂O (1), [Mn₂(sdba)₂(μ-H₂O)(py)₄]_n (2), [Mn₃(sdba)₂(Hsdba)₂(2,2′-bipy)₂]_n (3), [Mn₄(sdba)₄(4-mepy)₂(H₂O)₄]_n·2nH₂O (4) and [Mn₄(sdba)₄(bpp)₄(μ-H₂O)₂]_n·0.5nH₂O (5) (phen = 1,10-phenanthroline, 2,2′-bipy = 2,2′-bipyridine, 4-mepy = 4-picoline, bpp = 1,3-bi(pyridine-4-yl)propane) were hydrothermally synthesized and structurally characterized. The M-O-C metal clusters in above complexes act as SBUs, and the V-shaped sdba ligands link the SBUs to generate the novel frameworks. In complexes 1 and 3 their 1D chains are linked into the 2D planes through various hydrogen bonding. Complex 2 displays the 3D structure with interpenetrated threefold, while complexes 4 and 5 both exhibit the 3D structures with the tetra-nuclear Mn₄ units. The magnetic susceptibility studies in the 2-300 K range for these complexes reveal the existence of anti-ferromagnetic exchange interactions between the Mn^II ions.     

New amino-dithiaphospholanes and phosphoramidodithioites and their rhodium and iridium complexes

New sulfur derivatives of phosphoramidite ligands were synthesized and the impact of the sulfur unit on the spectroscopic properties of their rhodium and iridium complexes was investigated. The new ligands Bn₂NPSCH₂CH₂S^a(P-S^a) (Bn = benzyl, 4), Bn₂NPSCHCHS^a(CH₂)₃C^aH₂(P-S^a)(C^a-S^a) (6) and Bn₂NP(4-XC₆H₄OMe)₂ (X = S, 7a; X = O, 7b) were converted to the rhodium and iridium complexes trans-[Rh(CO)Cl(L)₂] (L = 4, 6, 7), [RhCl(COD)(L)] (L = 4, 6, 7), [IrCl(COD)(7a)] and [IrCl₂Cp∗(6)]. For comparison, some phosphoramidite complexes of these formulations also were synthesized. The new metal complexes were spectroscopically analyzed. For the carbonyl complexes, the ν_CO IR stretching frequencies were lower than for the corresponding phosphite and phosphoramidite ligands. The ¹J_PRh coupling constants for the rhodium complexes with the new ligands were also smaller than for the respective phosphoramidite and phosphite complexes. Finally, the ¹J_PSe coupling constants of the selenides of the new ligands were lower than those of the phosphoramidite ligands but higher than for PPh₃. The spectroscopic data reveal that the new thio ligands 4, 6 and 7a are more electron donating than phosphites and phosphoramidites but less electron donating than PPh₃.     

Construction of crystal structures of metal(II)-benzoates (M = Mn, Ni, Co, Cu, Zn, and Cd) and 1,2-bis(4-pyridyl)ethane: Effects of metal coordination modes and their catalytic activities

Five polymeric metal(II)-benzoate complexes of formula [Mn(O₂CPh)₂(CH₃OH)₂(bpa)]_n (1-Mn), [Co(O₂CPh)₂(H₂O)(bpa)_1.5]_n (2-Co), [Ni(O₂CPh)₂(H₂O)(bpa)_1.5]_n (3-Ni), [Cu(O₂CPh)₂(CH₃OH)₂(bpa)]_n (4-Cu), and [Cd(O₂CPh)₂(bpa)_1.5]_n (6-Cd) have been synthesized and characterized (bpa = 1,2-bis(4-pyridyl)ethane). They showed two kinds of structures: parallelogram-like two-dimensional sheets for Co, Ni, and Cd, and one-dimensional chains for Mn, Cu, and Zn. Since similar structures provide similar coordination geometries, the structures depend on the coordination geometries of metal ions. The compounds 1-Mn, 2-Co, 4-Cu, 5-Zn, and 6-Cd have catalyzed efficiently the transesterification of a variety of esters, while 3-Ni has displayed a very slow conversion. The reactivity of catalyst 6-Cd containing Cd ion, well known as an inert metal ion for the ligand substitution, was found to be comparable to that of 5-Zn. The reactivities of the compounds used in this study are in the order of 5-Zn > 6-Cd > 1-Mn > 4-Cu > 2-Co ? 3-Ni, indicating that the non-redox metal-containing compounds (5-Zn and 6-Cd) show better activity than the redox-active metal-containing compounds (1-Mn, 4-Cu, 2-Co, and 3-Ni).     

Transition metal complexes based on pyridine ligand containing both bis(2-pyridyl) and 1,3-dithiole-2-ylidene units: Syntheses, structures, and magnetic studies

Two new mononuclear spin-crossover iron(II) complexes, [FeL₂(NCS)₂] · H₂O (1) and [FeL₂(NCSe)₂] (2), have been synthesized from the reaction of the versatile ligand 4,5-bis(2-cyanoethylthio)-2-bis(2-pyridyl)methylene-1,3-dithiole (L), Fe(ClO₄)₂, and KNCX (X = S/Se). Reactions of L with Cu^II or Co^II salts afford one mononuclear complex [CuL(hfac)₂] · CH₃OH (hfac = hexafluoroacetylacetonate) (3), one dinuclear complex [(CuLCl)₂(μ-Cl)₂] · CH₃OH (4), and two 1D chain species, [CuL₂]_n(BF₄)_2n (5) and [CoL₂]_n(ClO₄)_2n · 2nCH₂Cl₂ (6). The crystal structures of complexes 1 and 3-6 have been determined by X-ray crystallography. Short intermolecular S?S contacts between neighboring 1D arrays are observed in 5 and 6, which lead to the formation of the 2D structure. The magnetic properties are studied, and antiferromagnetic couplings between the Cu^II centers across the chloride bridges have been found in 4 (J = 2.04 cm^-1). Spin-crossover behaviors between high and low spin states are observed at T_1/2 = 80 K for 1 and T_1/2 = 300 K for 2, respectively.     

Reactivity of phenyldi(2-thienyl)phosphine towards group 7 metal carbonyls: Carbon-phosphorus bond activation

Addition of phenyldi(2-thienyl)phosphine (PPhTh₂) to [Re₂(CO)_10−n(NCMe)_n] (n = 1, 2) affords the substitution products [Re₂(CO)_10−n(PhPTh₂)_n] (1, 2) together with small amounts of fac-[ClRe(CO)₃(PPhTh₂)₂] (3) (n = 2). Reaction of [Re₂(CO)₁₀] with PPhTh₂ in refluxing xylene affords a mixture which includes 2, [Re₂(CO)₇(PPhTh₂)(μ-PPhTh)(μ-H)] (4), [Re₂(CO)₇(PPhTh₂)(μ-PPhTh)(μ-η¹,κ¹(S)-C₄H₃S)] (5) and mer-[HRe(CO)₃(PPhTh₂)₂] (6). Phosphido-bridged 4 and 5 are formed by the carbon-phosphorus bond cleavage of the coordinated PPhTh₂ ligand, the cleaved thienyl group being retained in the latter. Reaction of [Mn₂(CO)₁₀] with PPhTh₂ in refluxing toluene affords [Mn₂(CO)₉(PPhTh₂)] (7) and the carbon-phosphorus bond cleavage products [Mn₂(CO)₆(μ-PPhTh)(μ-η¹,η⁵-C₄H₃S)] (8) and [Mn₂(CO)₅(PPhTh₂)(μ-PPhTh)(μ-η¹,η⁵-C₄H₃S)] (9). Both 8 and 9 contain a bridging thienyl ligand which is bonded to one manganese atom in a η⁵-fashion.     

Probing valence and spin situations in selective ruthenium-iminoquinonoid frameworks. An experimental and DFT analysis

The ruthenium-iminoquinone complexes, [Ru(tpm)(Cl)(Q)]⁺ [tpm = tris(1-pyrazolyl)methane, Q = 3,5-di-tert-butyl-N-aryl-1,2-benzoquinonemonoimine, where aryl = C₆H₅, [1]⁺; m-(OCH₃)₂C₆H₃, [2]⁺; m-(Cl)₂C₆H₃, [3]⁺] have been synthesized. The sensitive bond distances of “Q” in [1](ClO₄) and [2](ClO₄), C-O: 1.294(8), 1.281(2) Å; C-N: 1.352(8), 1.335(2) Å; and C-C(meta): 1.366(10)/1.367(9) Å, 1.364(2)/1.353(2) Å, respectively, and other analytical as well as theoretical (DFT) events suggest the valence configuration of [Ru^III(tpm)(Cl)(Q_Sq⁻)]⁺ for [1]⁺-[3]⁺. The paramagnetic [1]⁺-[3]⁺ show sharp ¹H NMR spectra with strikingly small J of 1.8-3.0 Hz. The DFT calculations on [1]⁺ predict that the triplet (S = 1) state exists above (1004 cm⁻¹) the singlet (S = 0) ground state. [1]⁺ exhibits μ = 2.2 BM at 300 K which diminishes to 0.3 BM near 2 K due to the steady decrease in the ratio of triplet to singlet population with the lowering of temperature. [1]⁺-[3]⁺ exhibit one oxidation and two successive reductions each in CH₃CN. Experimental and DFT analyses collectively establish the valence configurations at the non-innocent {Ru-Q} interface along the redox chain as [(tpm)(Cl)Ru^III(Q_Q^o)]²⁺ ([1]²⁺-[3]²⁺) → [(tpm)(Cl)Ru^III(Q_Sq⁻)]⁺ ([1]⁺-[3]⁺) → [(tpm)(Cl)Ru^II(Q_Sq⁻)] ↔ [(tpm)(Cl)Ru^III(Q_Cat)] (1-3) → [(tpm)(Cl)Ru^II(Q_Cat)]⁻ ([1]⁻-[3]⁻). The spectral features of [1]ⁿ-[3]ⁿ (n = +2, +1, 0) have been addressed based on the TD-DFT calculations on [1]ⁿ.     

Supramolecular assembly driven by hydrogen-bonding and π-π stacking interactions based on copper(II)-terpyridyl complexes

Six 2D and 3D supramolecular complexes [Cu(L1)(O₂CCH₃)₂] · H₂O (1), [Cu₂(L2)₂(μ₂-O₂CCH₃)₂](BF₄)₂ (2), [Cu₂(L1)₂(BDC)(NO₃)₂] · 0.5H₂O (3) [Cu₂(L2)₂(BDC)(NO₃)₂] (4), [Cu₂(L3)₂(BDC)(NO₃)₂] · 0.5H₂O (5) and [Cu₂(L2)₂(BDC)(H₂O)₂](BDC) · 8H₂O (6) (L1 = 4′-(4-pyridyl)-2,2′:6′,2″-terpyridine, L2 = 4′-(2-pyridyl)-2,2′:6′,2″-terpyridine, L3 = 4′-phenyl-2,2′:6′,2″-terpyridine, BDC = 1,4-benzenedicarboxylate), have been prepared and structurally characterized by X-ray diffraction crystallography. In complexes 1, 3, and 4, 1D channels are formed through C-H?O and C-H?N hydrogen-bonding interactions, and further linked into 3D structure via C-H?O and O-H?O interactions. Complex 2 is a 2D layer constructed from intermolecular C-H?F and π-π stacking interactions. In the structure of 6, the BDC²⁻ ions and solvent water molecules form a novel 2D layer containing left- and right-handed helical chains via hydrogen-bonds, and an unusual discrete water octamer is formed within the layer. In 2, 4, 6 and [Ag₂(L2)₂](PF₆)₂ (7) the bonding types of pendent pyridines of L2 depending on the twist about central pyridines are involved in intramolecular (2 and 4), intermolecular (6) or coordination bonds (7) in-twist-order of 5.8°, 3.7°, 28.2° and 38.0°, respectively. Differently, the pendent pyridines of L1 in 1 and 3 form intermolecular hydrogen bonds despite of distinct corresponding twist angles of 25.1° (1) and 42.6°(3). Meanwhile, π-π stacking interactions are present in 1-6 and responsible for the stabilization of these complexes.     

Hydrogen-bonded copper(II) and nickel(II) complexes and coordination polymeric structures containing reduced Schiff base ligands

Complexes [Cu(HSas)(H₂O)] · 2H₂O (H₃Sas = N-(2-hydroxybenzyl)-l-aspartic acid) (1), [Cu(HMeSglu)(H₂O)] · 2H₂O (H₃MeSglu = (N-(2-hydroxy-5-methylbenzyl)-l-glutamic acid) (2), [Cu₂(Smet)₂] (H₂Smet = (N-(2-hydroxybenzyl)-l-methionine) (3), [Ni(HSas)(H₂O)] (4), [Ni₂(Smet)₂(H₂O)₂] (5), and [Ni(HSapg)₂] (H₂Sapg = (N-(2-hydroxybenzyl)-l-aspargine) (6) have been synthesized and characterized by chemical and spectroscopic methods. Structural determination by single crystal X-ray diffraction studies revealed 1D coordination polymeric structures in 2 and 4, and hydrogen-bonded network structure in 5 and 6. In contrast to previously reported coordination compounds with similar ligands, the phenol remains protonated and bonded to the metal ions in 2 and 4, and also probably in 1. However, the phenolic group is non-bonded in 6.     

Towards absolute asymmetric synthesis. Synthesis and crystal structure of stereochemically labile MCl2 (M = Co, Ni, Cu, Zn) complexes with diamine ligands

In search for new conglomerates, seven stereochemically labile complexes between MCl₂ (M = Co, Cu, Ni, Zn) and bidentate ligands, the commercially available N,N,N′-trimethylethane-1,2-diamine (trimeda) and the somewhat bulkier N-isopropyl-N,N′,N′-trimethylethane-1,2-diamine (itmeda), have been synthesized and characterized using single crystal X-ray diffraction. The trimeda and itmeda ligands exhibit chirogenic nitrogen centers and may form chiral metal complexes that are candidates for total spontaneous resolution. Copper(II) chloride forms the dimeric meso complexes [{CuCl₂(trimeda)}₂] (1) and [{CuCl₂(itmeda)}₂] (2), while [CoCl₂(trimeda)₂] (3) and [NiCl₂(trimeda)₂] (4) exhibit six-coordinate but chiral (R,R)- and (S,S)-complexes. Three examples of the chiral target complex, comprising four-coordinate stereochemically labile monomers, was successfully prepared, viz. [NiCl₂(itmeda)] (5), [ZnCl₂(itmeda)] (6), and [CoCl₂(itmeda)] (7).In all seven complexes, the λ-conformation of the five-membered trimeda-metal chelate ring corresponds to the (S)-configuration at nitrogen, and vice versa. Supramolecular interactions in 3 and 4 form hydrogen-bonded heterochiral ribbons. However, crystals of 5-7 display homochiral interactions resulting in polar phases. Weak CH-Cl interactions in 5 and 6 form homochiral layers. In 7, interactions form homochiral helices along the a-axis.     

Structural variability in manganese(II) complexes of N,N′-bis(2-pyridinylmethylene) ethane (and propane) diamine ligands

Manganese(II) complexes, Mn₂L¹₃(ClO₄)₄, MnL¹(H₂O)₂(ClO₄)₂, MnL²(H₂O)₂(ClO₄)₂, and {(μ-Cl)MnL²(PF₆)}₂ based on N,N′-bis(2-pyridinylmethylene) ethanediamine (L¹) and N,N′-bis(2-pyridinylmethylene) propanediamine (L²) ligands have been prepared and characterized. The single crystal X-ray diffraction analysis of Mn₂L²₃(ClO₄)₄ shows that each of the two Mn(II) ion centers with a Mn-Mn distance of 7.15 Å are coordinated by one ligand while a common third ligand bridges the metal centers. Solid-state magnetic susceptibility measurements as well as DFT calculations confirm that each of the manganese centers is high-spin S = 5/2. The electronic structure obtained shows no orbital overlap between the Mn(II) centers indicating that the observed weak antiferromagentism is a result of through space interactions between the two Mn(II) centers. Under different reaction conditions, L¹ and Mn(II) yielded a one-dimensional polymer, MnL¹(H₂O)₂(ClO₄)₂. Ligand L² when reacted with manganese(II) perchlorate gives contrarily to L¹ mononuclear MnL²(H₂O)₂(ClO₄)₂ complex. The analysis of the structural properties of the MnL²(H₂O)₂(ClO₄)₂ lead to the design of dinuclear complex {(μ-Cl)MnL²(PF₆)} where two chlorine atoms were utilized as bridging moieties. This complex has a rhomboidal Mn₂Cl₂ core with a Mn-Mn distance of 3.726 Å. At room temperature {(μ-Cl)MnL²(PF₆)} is ferromagnetic with observed μ_eff = 4.04 μ_B per Mn(II) ion. With cooling, μ_eff grows reaching 4.81 μ_B per Mn(II) ion at 8 K, and then undergoes ferromagnetic-to-antiferromagnetic phase transition.