Rh and Ir dibenzo[a,e]cyclooctatetraene complexes: Chloro, hydroxo, and mixed Au oxo complexes

New and improved procedures are reported for the synthesis of [M(DBCOT)(μ-Cl)]₂ (M = Rh, Ir; DBCOT = dibenzo[a,e]cyclooctatetraene) from MCl₃(H₂O)_x or [M(COD)(μ-Cl)]₂ and DBCOT. Treatment of [M(DBCOT)(μ-Cl)]₂ with [(LAu)₃(μ-O)]BF₄(L = PPh₃, P^tBu₃) yields the mixed-metal oxo complexes [M(DBCOT)(μ⁴-O)(AuL)₂]₂(BF₄)₂. Dimeric [Rh(DBCOT)(μ-OH)]₂ is obtained from the reaction of [M(DBCOT)(μ-Cl)]₂ with KOH in EtOH/H₂O. All complexes except [Rh(DBCOT)(μ-Cl)]₂ have been structurally characterized by single crystal X-ray diffraction.     

Synthesis, structure and electronic spectra of new three-coordinated copper(I) complexes with tricyclohexylphosphine and diimine ligands

Three new copper(I) complexes with tricyclohexylphosphine (PCy₃) and different diimine ligands, [Cu(phen)(PCy₃)]BF₄ (1) (phen = 1,10′-phennanthroline), [Cu(bpy)(PCy₃)₂]BF₄ (2) (bpy = 2,2′-bipyridine) and [Cu(MeO-CNN)(PCy₃)]BF₄ (3) (MeO-CNN = 6-(4-methoxyl)phenyl-2,2′-bipyridine), have been synthesized and characterized. X-ray structure reveals that complexes 1 and 3 are three-coordinated with trigonal geometry, while complex 2 adopts distorted tetrahedron geometry. Complexes 1 and 3 exhibit ligand redistribution reactions in chloromethane solution by addition of excess amount of PCy₃, in which three-coordinated 1 changes into four-coordinated [Cu(phen)(PCy₃)₂]⁺, and 3 leads to form [Cu(PCy₃)₂]BF₄ and CNN-OMe. All the three complexes display yellow ³MLCT emissions in solid state at room temperature with λ_max at 558, 564 and 582 nm for 1, 2 and 3, respectively, and red-shift to 605, 628 and 643 nm at 77 K in dichloromethane solution.     

EPR study of the oxidation reaction of nickel(0) phosphine complexes with Lewis and Brønsted acids

The oxidation of Ni(PPh₃)₄ with BF₃ · OEt₂, H₃CCOOH, and F₃CCOOH, and that of (PPh₃)₂Ni(C₂H₄) with BF₃ · OEt₂ is studied by EPR spectroscopy. The reaction of the Ni(0) complexes with BF₃ · OEt₂ gives Ni(II) complexes with which they react to form Ni(I) compounds with covalent Ni-F and Ni-B bonds that transform with excess BF₃ · OEt₂ into cationic paramagnetic Ni(I) complexes. Acetic acid also adds oxidatively to Ni(PPh₃)₄ to form a Ni(II) complex that reacts further to give Ni(I) hydride and carboxylate complexes. The Ni(I) hydride is transformed by the acid into the Ni(I) carboxylate with release of hydrogen, the amount of which depends on the rate of acid addition. The following Ni(I) complexes are identified in the reaction medium: [Ni(PPh₃)₃]BF₄, [(PPh₃)₂Ni(OEt₂)]BF₄, [(PPh₃)Ni(OEt₂)_n]BF₄, (PPh₃)₂NiBF₂, (PPh₃)₃NiOOCCH₃, and [(PPh₃)₂Ni(OEt₂)P(OEt)₃]BF₄. Oxidation schemes of Ni(0) complexes by Lewis and Brønsted acids are given.     

Crystal structure, magnetic and electrochemical properties of five-coordinate copper (II) complexes with 1,10-phenanthroline-5,6-dione

Three new five-coordinate Cu^II complexes, [Cu(tpy)(phen-dione)](PF₆)₂, [Cu(phen)(phen-dione)Cl]PF₆ and [Cu(bpy)(phen-dione)Cl]PF₆ (tpy = 2,2′;6′,2″-terpyridine, phen = 1,10-phenanthroline and phen-dione = 1,10-phenanthroline-5,6-dione) have been prepared and characterized by elemental analysis, IR and UV-Vis spectroscopies and cyclic voltammetry.The complex of [Cu(tpy)(phen-dione)](PF₆)₂ crystallized with one molecule of acetonitrile. The ortep drawing of [Cu(tpy)(phen-dione)](PF₆)₂ · CH₃CN shows that the coordination geometry around Cu^II is a distorted trigonal- bipyramid. Due to the steric hindrance of in the unit cell, the tpy ligands in each complex cation cannot interact in a π-π fashion. The effective magnetic moment (μ_eff) of the complexes was measured by the Evans method. The cyclic voltammograms at Pt disk electrode for these complexes display only one reversible Cu(II)/Cu(I) redox couple.     

Topoisomerase II inhibition activity of new square planar Ni(II) complexes containing N-substituted thiosemicarbazones: Synthesis, spectroscopy, X-ray crystallography and electrochemical characterization

New Ni(II) thiosemicarbazone complexes containing triphenylphosphine namely [Ni(Sal-mtsc)(PPh₃)](2) and [Ni(Nap-mtsc)(PPh₃)] (3) (where Sal-mtsc = salicylaldehyde-N(4)-methylthiosemicarbazone and Nap-mtsc = 2-hydroxy-1-naphthaldehyde-N(4)-methylthiosemicarbazone) have been synthesised and characterized by elemental analysis, IR, electronic and ¹H NMR spectroscopy. The crystal structures of the complexes have been determined by single crystal X-ray diffraction technique. In all the complexes the thiosemicarbazone ligand coordinated to nickel through ONS mode. The electrochemical behavior of the complexes has been investigated by using cyclic voltammetry in acetonitrile. The new complexes were subjected to test their DNA topoisomerase II inhibition efficiency. The complex [Ni(Nap-mtsc)(PPh₃)] (3) showed 95% inhibition. The observed inhibition activity was found to be more potent than the activity of conventional standard Nalidixic acid.     

Extended structures of three new coordination polymers based on 1,10-phenanthroline derivatives and 1,4-benzenedicarboxylate mixed ligands: Preparation, structural characterization and properties

Three coordination polymers, namely, [Cd(HOIP)₂(1,4-bdc)] (1), [Cu(HOIP)(1,4-bdc)] (2) and [Cu(PDIP)(1,4-bdc)] (3) (HOIP = 2-(4-hydroxylbenzene) imidazo[4,5-f]1,10-phenanthroline, PDIP = 2-(3-pyridine) imidazo[4,5-f]1,10-phenanthroline, and 1,4-bdc = 1,4-benzenedicarboxylate), have been synthesized under the hydrothermal conditions. All complexes have been characterized by elemental analyses, IR and single-crystal X-ray diffraction. Structural analyses reveal that complex 1 possesses infinite one-dimensional (1D) chain bridged by 1,4-bdc ligands, complexes 2 and 3 both exhibit two-dimensional (2D) (4,4) network structures based on dinuclear [Cu₂O₂] units. However, the weak interactions are different in complexes 1-3. Moreover, the thermal properties of all complexes, fluorescence property of 1, and the electrochemical behavior of 3 are also reported in this paper.     

Mononuclear rhodium and iridium compounds with pyridyl-pyrazole ligands

Neutral [MCl(L₂)(Hpzpy)], [M(L₂)(pzpy)] and cationic [M(L₂)(Hpzpy)]CF₃SO₃ rhodium(I) or iridium(I) complexes [M = Rh or Ir; L₂ = diolefin or (CO)₂; pzpy = 3-(2-pyridyl)pyrazolate] have been prepared; the pzpy and Hpzpy ligands coordinate to the metal as bidentate chelate groups through one pyrazole nitrogen and the pyridine nitrogen atom. The reactivity of these complexes towards oxidative addition reactions of halogens, methyl iodide or triflic acid and towards displacement reactions has been studied. The neutral and cationic iridium(I) complexes are modest catalysts for the hydrosilylation of phenylacetylene with triethylsilane at 60 °C. The complexes have been characterised by analytical and spectroscopic data; their configuration has been confirmed by COSY and NOESY experiments and the molecular structure of [Rh(COD)(Mepzpy)(PPh₃)]CF₃SO₃ has been established by an X-ray diffraction study.     

Structure and solution behaviour of cyclooctadiene complexes of platinum(II)

The substitution behaviour of [PtCl(R)(COD)] (R⁻ = Me and Fc) complexes, by the stepwise addition of phosphine ligands, L (L = PPh₃, PEt₃ and P(NMe₂)₃), were investigated in situ by ¹H and ³¹P NMR spectroscopy. Addition of less than two equivalents of the phosphine ligand results in the formation of dimeric molecules with the general formula trans-[Pt(R)(μ-Cl)(L)]₂ for the sterically demanding systems where R⁻ = Me/L = P(NMe₂)₃ and R⁻ = Fc/L = PEt₃, PPh₃ and P(NMe₂)₃ while larger quantities resulted in cis- and trans mixtures of mononuclear complexes being formed. In the case of the relatively small steric demanding, strongly coordinating, PEt₃ ligand the trans-[PtCl(R)(PEt₃)₂] mononuclear complexes were exclusively observed in both cases. The crystal structures of the two substrates, [PtCl(R)(COD)] (R⁻ = Me or Fc), as well as the cis-[PtCl(Fc)(PPh₃)₂] substitution product are reported.     

Copper(I) complexes with Schiff base and 1,2-bis(diphenylphosphino)ethane as ligands: Synthesis, structure and catalytic properties for the amination of aryl halide

Some copper(I) complexes of the type [Cu(L)(dppe)]X (1-4) [where L = (3-trifluoromethylphenyl)pyridine-2-ylmethylene-amine; dppe = 1,2-bis(diphenylphosphino)ethane; X = Cl⁻, CN⁻, ClO₄⁻ and BF₄⁻] have been synthesized by the condensation of 3-aminobenzotrifluoride with 2-pyridinecarboxaldehyde followed by the reaction with CuCl, CuCN, [Cu(MeCN)₄]ClO₄ and [Cu(MeCN)₄]BF₄ in presence of dppe. The complexes 1-4 were then characterized on the basis of elemental analysis, IR, UV-Vis and ¹H NMR spectral studies. The representative complex of the series 4 has been characterized by single crystal X-ray diffraction which reveal that in complex the central copper(I) ion assumes the irregular pseudo-tetrahedral geometry. The catalytic activity of the complexes was tested and it was found that all the complexes worked as effective catalyst in the amination of aryl halide.     

Quantification of cis and trans influences in [PtX(PPh3)3] complexes. A P NMR study

In [PtX(PPh₃)₃]⁺ complexes (X = F, Cl, Br, I, AcO, NO₃, NO₂, H, Me) the mutual cis and trans influences of the PPh₃ groups can be considered constants in the first place, therefore the one bond Pt-P coupling constants of P_(cis) and P_(trans) reflect the cis and trans influences of X. The compounds [PtBr(PPh₃)₃](BF₄) (2), [PtI(PPh₃)₃](BF₄) (3), [Pt(AcO)(PPh₃)₃](BF₄) (4), [Pt(NO₃)(PPh₃)₃](BF₄) (5), and the two isomers [Pt(NO₂-O)(PPh₃)₃](BF₄) (6a) and [Pt(NO₂-N)(PPh₃)₃](BF₄) (6b) have been newly synthesised and the crystal structures of 2 and 4·CH₂Cl₂·0.25C₃H₆O have been determined. From the ¹J_PtP values of all compounds we have deduced the series: I > Br > Cl > NO₃ > ONO > F > AcO > NO₂ > H > Me (cis influence) and Me > H > NO₂ > AcO > I > ONO > Br > Cl > F > NO₃ (trans influence). These sequences are like those obtained for the (neutral) cis- and trans-[PtClX(PPh₃)₂] derivatives, showing that there is no dependence on the charge of the complexes. On the contrary, the weights of both influences, relative to those of X = Cl, were found to depend on the charge and nature of the complex.     

Synthesis, characterization and reactivity of polypyridyl ruthenium(II) carbonyl complexes with phosphine derivatives: Ruthenium-carbon bond labilization based on steric and electronic effects

Ruthenium phosphine complexes with a CO ligand [Ru(tpy)(PR₃)(CO)Cl]⁺ (tpy = 2,2′:6′,2″-terpyridine, R = Ph or p-tolyl), were prepared by introduction of CO gas to the corresponding dichloro complexes at room temperature. New carbonyl complexes were characterized by various methods including structural analyses. They were shown to release CO following the addition of several N-donors to form the corresponding substituted complexes. The kinetic data and structural results observed in this study indicated that the CO release reactions proceeded in an interchange mechanism. The molecular structures of [Ru(tpy)(PPh₃)(CO)Cl]PF₆, [Ru(tpy)(P(p-tolyl)₃)(CO)Cl]PF₆ and [Ru(tpy)(PPh₃)(CH₃CN)Cl]PF₆ were determined by X-ray crystallography.     

Reactivity of [PdCl(μ-med)]2 with monodentate or bidentate ligands. Structure of the dinuclear complexes [Pd(μ-med)(PPh3)]2(BF4)2 and [Pd(μ-med)(bpy)]2(BF4)2. [Hmed=N-(2-mercaptoethyl)-3,5-dimethylpyrazole]

Treatment of the ligand N-(2-mercaptoethyl)-3,5-dimethylpyrazole with [Pd(CH₃COO)₂]₃ and reaction of [PdCl(μ-med)]₂ with pyridine (py) or triphenylphosphine (PPh₃) in the presence of AgBF₄ produced the following complexes: [Pd(CH₃COO)(μ-med)]₂, [Pd(μ-med)(py)]₂(BF₄)₂ and [Pd(μ-med)(PPh₃)]₂(BF₄)₂. Similar reactions carried out with 2,2^′-bipyridine (bpy) or 1,3-bis(diphenylphosphino)propane (dppp) produced [Pd(μ-med)(bpy)]_x(BF₄)_x (x=1 or 2) and [Pd(μ-med)(dppp)]_x(BF₄)_x (x=1 or 2). Treatment of [Pd(μ-med)(bpy)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced [Pd₃Cl₂(μ-med)₂(bpy)₂](BF₄)₂. Treatment of [Pd(μ-med)(dppp)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced a mixture of [Pd(μ-Cl)(dppp)]₂(BF₄)₂ and [Pd(μ-med)₂(dppp)]²⁺. X-ray crystal structures of [Pd(μ-med)(PPh₃)]₂(BF₄)₂ · 2CH₃CN and [Pd(μ-med)(bpy)]₂(BF₄)₂ · 0.5CH₃OH are presented.     

Synthesis, structural and spectroscopic characterization of mono- and binuclear copper(I) complexes with substituted diimine and phosphine ligands

The reaction of [Cu(CH₃CN)₄]BF₄, 6-(4-methoxyl)phenyl-2,2′-bipyridine (designated as MeO-CNN), and/or tricyclohexylphosphine (PCy₃) and diimine ligands derived from 4,4′-bipyridine gave four mono- and binuclear copper(I) complexes, [Cu(MeO-CNN)₂]BF₄ (1), [Cu₂(MeO-CNN)₂(PCy₃)₂(4,4′-bipy)](BF₄)₂ · 1.5CH₂Cl₂ (2) (bipy = bipyridine), [Cu₂(MeO-CNN)₂(PCy₃)₂(bpete)](BF₄)₂ · 4CH₂Cl₂ (3) (bpete = trans-1,2-bis(4-pyridyl)ethene) and [Cu₂(MeO-CNN)₂(PCy₃)₂(4,4′-azpy)] (BF₄)₂ · 1.5CH₂Cl₂ (4) (azpy = azobispyridine). Crystallographic studies of complexes 1-4 show that each copper(I) center adopts a pseudo-tetrahedral coordination geometry. Complexes 2-4 consists of -Cu(MeO-CNN)(PCy₃) units which are linked through 4,4′-bipy, bpete and 4,4′-azpy, respectively. The UV-Vis spectra of these four complexes all exhibit intense high-energy absorptions at λ_max < 340 nm and broad visible bands in a range of 430-550 nm, ascribed to intraligand (IL π → π^∗) transitions and metal-to-ligand charge-transfer (MLCT) transitions, respectively. The density functional theory calculation was used to interpret the absorption spectrum of 1, which further supports the assignment of MLCT character. The binuclear complexes 2 and 3 both display red solid-state emissions centred at 620 and 660 nm from metal-to-ligand charge-transfer excited state, respectively. Interestingly, the electron paramagnetic resonance (EPR) spectral measurements confirm copper(I) complexes oxidized to corresponding copper(II)-halide product upon excitation at 355 nm in dichloromethane solution.     

Synthesis, structures and spectroscopic properties of palladium(II) complexes with tridentate piperidyl-containing pincer ligands

A new series of square planar palladium(II) complexes with pincer ligands, pip₂NCN⁻ (pip₂NCNH = 1,3-bis(piperidylmethyl)benzene) and pip₂NNN (2,6-bis(piperidylmethyl)pyridine), has been prepared: Pd(pip₂NCN)X (X = Cl, Br, I), [Pd(pip₂NCN)(L)](BF₄) (L = pyridine, 4-phenylpyridine), and [Pd(pip₂NNN)Cl]Cl. The X-ray crystal structures of Pd(pip₂NCN)Br, [Pd(pip₂NCN)(L)]BF₄, and [Pd(pip₂NNN)Cl]Cl confirm the tridentate coordination geometries of the pincer ligands. For the pip₂NCN⁻ complexes, each piperidyl ring adopts a chair conformation with the metal center at an equatorial position on the N(piperidyl) atom. However, one of the piperidyl groups of Pd(pip₂NNN)Cl⁺ adopts a previously unobserved coordination geometry, effectively placing the metal center at an axial position on the N(piperidyl) atom. ¹H NMR and UV-Vis absorption measurements provide additional insight into the electronic structures of these complexes. The ¹H NMR spectra of Pd(pip₂NCN)X (X = Cl, Br, I) are consistent with deshielding of the pip₂NCN⁻ ligand resonances along the Cl < Br < I series, in opposition to the relative halogen electronegativities. It is suggested that this trend is consistent with decreasing filled/filled repulsions between the dπ orbitals of the metal center and the lone pair orbitals of the halide ligands along this series. Electronic absorption spectra support the notion that ligand-to-metal charge-transfer states are stabilized in these palladium(II) complexes relative to their platinum(II) analogues.     

Synthesis, crystal structure and action on Escherichia coli by microcalorimetry of copper complexes with 1,10-phenanthroline and amino acid

Copper complexes: [Cu(phen)(L-Ser)(H₂O)Cl] (1), [Cu(phen)(Gly)(H₂O)]Cl·3H₂O (2), [Cu(phen)(L-Ala)(H₂O)]Cl·H₂O (3), [Cu(phen)(L-Phe)(H₂O)]Cl·2.5H₂O (4), Cu(phen)₂Cl₂·6H₂O (5) (phen = 1,10-phenanthroline) were synthesized and characterized. The structure of 1 was characterized by X-ray crystallography and showed in a triclinic system with space group P1, a = 6.8953(15) Å, b = 10.737(2) Å, c = 11.894(3) Å, α = 110.395(3)°, β = 94.183(4)° and γ = 100.540(3)°. The antibacterial activities on Escherichia coli (E. coli) of these five copper complexes and CuCl₂ (6) were investigated by microcalorimetry. By analyzing the obtained metabolic thermogenic data and curves, crucial parameters such as rate constant of bacterial growth (k), half inhibitory concentration (IC₅₀), and generation time (t_G) were determined. All these copper complexes could stimulate the growth of the E. coli at their lower concentration. At their higher concentration they all showed antibacterial action. The inhibition on E. coli was 5 > 1 ≈ 2 ≈ 3 ≈ 4 > 6. And the antibacterial mechanism was discussed preliminarily.     

Synthesis, spectroscopy and structural characterization of silver(I) complexes containing unidentate N-donor azole-type ligands

From the interaction between azole-type ligands L and AgX (X = NO₃ or ClO₄) or [AgX(PPh₃)_n] (X = Cl, n = 3; X = MeSO₃, n = 2), new ionic mononuclear [Ag(L)₂]X and [Ag(PPh₃)₃L][X] or neutral mono-([Ag(PPh₃)_nL(X)]) or di-nuclear ([{Ag(PPh₃)(L)(μ-X)}₂]) complexes have been obtained which have been characterized through elemental analysis, conductivity measurements, IR, ¹H NMR and, in some cases, also by ³¹P{¹H} NMR spectroscopy, and single-crystal X-ray studies. Stoichiometries and molecular structures are dependent on the nature of the azole (steric hindrance and basicity), of the counter ion, and on the number of the P-donor ligands in the starting reactants. Solution data are consistent with partial dissociation of the complexes, occurring through breaking of both Ag-N and Ag-P bonds.     

Cu(II) complexes with labile apical coordination: Synthesis, crystal structure, H NMR investigation, and oxidation properties of mononuclear [Cu(dien)(2-PhIm)(ClO4)] (1), [Cu(dien)(2-MeBzIm)] (2), complexes

The compounds [Cu(dien)(2-PhIm)(ClO₄)](ClO₄) (1); [Cu(dien)(2-MeBzIm)](ClO₄)₂ (2); where dien = diethylenetriamine, 2-PhIm = 2-phenylimidazole and 2-MeBzIm = 2-methylbenzimidazole, were synthesized and characterized. The complexes possessing [Cu(II)dien] moiety as common, the former containing 2-phenylimidazole, yielded square pyramidal geometry with apical perchlorate coordination [Cu1-O(5) = 2.449 Å], while the latter with 2-methylbenzimidazole formed square planar geometry with weak perchlorate contact [Cu1-O(8) = 2.596 Å] in its apical position. The effect of solvent and the variable temperature ¹H NMR investigation combinedly explore the geometrical rearrangement towards five coordination around Cu(II) metal center by accommodating the solvent molecule in its fifth coordination. Possessing easily labile perchlorate anion, both these complexes were investigated for their oxidation capability using 3,5-di-tert-butyl catechol (DTBC). The rate constant determined for the oxidation of DTBC to corresponding quinone indicates that they are catalytically quite similar and the k_cat of 1 ≈ 2. The crystal structure and the NMR investigations are discussed in detail.     

Facile synthesis and reactivity study of mixed phosphane-isocyanide Pd(II) and Pd(0) complexes

The reaction between an equimolecular mixture of isocyanide CNR (CNR = di-methylphenyl isocyanide (DIC), tert-butyl isocyanide (TIC), triphenyl phosphane (PPh₃) and a dechlorinated solution of the palladium allyl dimers [Pd(η³-allyl)Cl]₂ (allyl = 2-Meallyl, 1,1-Me₂allyl) in stoichiometric ratio yields the mixed derivative [Pd(η³-allyl)(CNR)(PPh₃)] only. Apparently, the mixed derivative represents the most stable species among all the possible ones that might be formed under those experimental conditions. Theoretical calculations are in agreement with the experimental observation and the energy stabilization of the mixed species with respect to the homoleptic derivatives is traced back to an overall push-pull effect exerted by the isocyanide and the phosphane acting synergically. Similar behavior is observed in the case of the synthesis of the palladacyclopentadienyl complexes [Pd(C₄(COOMe)₄)(CNR)(PPh₃)] and of the palladium(0) olefin complexes whose synthesis invariably yields the mixed [Pd(η²-olefin)(CNR)(PPh₃)] derivatives. The paper includes studies on the reactivity toward allylamination in the case of the palladium(II) allyl complexes. A diffractometric investigation on the solid state structures of four different palladium isocyanide-phosphane complexes is also included.     

Directing iridium-catalyzed C-C bond formation by selection of the ancillary ligands: Polymerization and cyclotrimerization of alkynes

The ability of organoiridium derivatives of catalyzing oligomerization and polymerization of terminal alkynes is markedly influenced by the nature of non-participative ligands coordinated to the metal. The dimeric species [Ir(cod)Cl]₂ and [Ir(cod)(OMe)]₂ (cod = 1,5-cyclooctadiene) as well as the phosphine complexes HIr(cod)(PR₃)₂ (PR₃ = PPh₃, P(p-MeOC₆H₄)₃, P(o-MeOC₆H₄)Ph₂, PCyPh₂) catalyze the polymerization reaction, whereas the diphosphine derivatives HIr(cod)(P-P) (P-P = Ph₂P(CH₂)_nPPh₂ (n = 1-4), o-C₆H₄(PPh₂)₂) promote the regioselective formation of 1,2,4-trisubstituted benzenes. On the other hand, the iridium complexes with nitrogen chelating ligands Ir(cod)(N-N)X and Ir(hd)(N-N)X (hd = 1,5-hexadiene; N-N = 1,10-phenanthroline and substituted derivatives; X = halogen) catalyze alkynes polymerization. In most cases one catalytic reaction predominates over the other possible routes, so that polymerization often takes place in the absence of oligomerization side reactions, and conversely cyclotrimerization is rarely accompanied by formation of either polyene or dimers.     

Iridium and rhodium complexes containing dichalcogenoimidodiphosphinato ligands

Treatment of [MCl(CO)(PPh₃)₂] with K[N(R₂PQ)₂] afforded [M{N(Ph₂PQ)₂}(CO)(PPh₃)] (M = Ir, Rh; Q = S, Se). The IR C=O stretching frequencies for [M(CO)(PPh₃){N(Ph₂PQ)₂}] were found to decrease in the order S > Se. Treatment of [M(COD)Cl]₂ with K[N(Ph₂PQ)₂] afforded [M(COD){N(Ph₂PQ)₂}] (COD = 1,5-cyclooctadiene; M = Ir, Rh; Q = S, Se). Treatment of [Ir(ol)₂Cl] with afforded (ol = cyclooctene COE, C₂H₄; Q = S, Se). Oxidative addition of [Ir(CO)(PPh₃){N(Ph₂PS)₂}] and [Ir(COD){N(Ph₂PS)₂}] with HCl afforded [Ir(H)(Cl)(CO)(PPh₃){N(Ph₂PS)₂}] and trans-[Ir(H)(Cl)(COD){N(Ph₂PS)₂}], respectively. Oxidative addition of [Ir(CO)(PPh₃){N(Ph₂PS)₂}] with MeI afforded [Ir(Me)(I)(CO)(PPh₃){N(Ph₂PS)₂}]. Treatment of [Ir(COE)₂Cl]₂ with K[N(R₂PO)₂] afforded [Ir(COE)₂{N(Ph₂PO)₂}] that reacted with MeOTf (OTf = triflate) to give [Ir{N(Ph₂PO)₂}(COE)₂(Me)(OTf)]. The crystal structures of [Ir(CO)(PPh₃){N(Ph₂PS)₂}], [M(COD){N(Ph₂PS)₂}] (M = Ir, Rh), (ol = COE, C₂H₄), trans-[Ir(H)(Cl)(COD){N(Ph₂PS)₂}], and [Ir(COE)₂{N(Ph₂PO)₂}] have been determined.