Efficient transformation ofMicromonospora melanosporea protoplasts byStreptomyces plasmid

An efficient and relatively simple procedure forMicromonospora melanosporea protoplast preparation and transformation is described. Transformation ofM. melanosporea protoplast by theStreptomyces plasmid pIJ702 was optimized by altering parameters affecting the formation, regeneration, and transformation of protoplasts. Improvement of regeneration medium resulted in relatively quick growth of transformants (only 7 days). As a result of these experiments we describe a new transformation method that has routinely yielded 10⁶ transformants/µg plasmid DNA.     

Insertional mutagenesis of Aspergillus fumigatus

We have investigated transformation with heterologous DNA as a method for insertional mutagenesis of Aspergillus fumigatus. Two methods, polyethylene glycol-mediated transformation of protoplasts and electroporation of germinating spores, were used to establish conditions leading to single-copy integration of transforming DNA at different genomic sites. We have assessed the effect of restriction enzyme-mediated integration (REMI) for both methods. Non-REMI protoplast transformation led to integration of multiple copies of transforming DNA in the majority of transformants. Results of REMI with protoplast transformation varied depending on the enzyme used. Low concentrations of several restriction enzymes stimulated transformation, but of ten enzymes investigated only REMI with XhoI and KpnI resulted in single-copy integration of transforming DNA for the majority of transformants. For protoplast transformation with XhoI- or KpnI-based REMI, 50% and 76% of insertions, respectively, were due to integrations at a genomic enzyme site corresponding to the enzyme used for REMI. Electroporation of spores without addition of restriction enzyme resulted in a high transformation efficiency, with up to 67% of transformants containing a single copy of transforming DNA. In contrast to protoplast transformation, electroporation of spores in the presence of a restriction enzyme did not improve transformation efficiency or lead to insertion at genomic restriction sites. Southern analysis indicated that for both protoplast transformation with REMI using KpnI or XhoI and for electroporation of spores without addition of restriction enzymes, transforming DNA inserted at different genomic sites in a high proportion of transformants.     

Efficient plasmid transformation of Streptomyces ambofaciens and Streptomyces fradiae protoplasts.

A procedure for efficient transformation of Streptomyces ambofaciens and Streptomyces fradiae protoplasts with plasmid DNA was developed. Transformation frequencies with S. fradiae protoplasts were strongly influenced by the temperatures for cell growth, protoplast formation, and protoplast regeneration. Transformation frequencies for both species were also influenced by the culture age before protoplast formation, the source and concentration of polyethylene glycol, the transformation-inducing agent, the concentration of protoplasts used in the transformation procedure, and the number of protoplasts added to regeneration plates. Transformation frequencies were substantially higher for both species when calf thymus DNA and protamine sulfate were added to the transformation mix. With S. fradiae, transformation frequencies were much lower with plasmid DNA prepared from other species than with the same plasmids prepared from S. fradiae, suggesting that S. fradiae expresses restriction and modification. With the modified transformation procedures using DNA prepared from homologous hosts, S. ambofaciens and S. fradiae are now transformed routinely at frequencies of 10(6) to 10(7) transformants per micrograms of plasmid DNA.     

Lactobacillus protoplast transformation

A method for the transformation of Lactobacillus protoplasts by plasmid DNA is reported. The procedure involves polyethylene glycol treatment of protoplasts to induce DNA uptake. A transformation efficiency ranging from 5 to 1000 transformants per microgram of DNA is achieved; the efficiency of protoplast regeneration ranged from 10 to 20%.     

Insertional mutagenesis of Aspergillus fumigatus

We have investigated transformation with heterologous DNA as a method for insertional mutagenesis of Aspergillus fumigatus. Two methods, polyethylene glycol-mediated transformation of protoplasts and electroporation of germinating spores, were used to establish conditions leading to single-copy integration of transforming DNA at different genomic sites. We have assessed the effect of restriction enzyme-mediated integration (REMI) for both methods. Non-REMI protoplast transformation led to integration of multiple copies of transforming DNA in the majority of transformants. Results of REMI with protoplast transformation varied depending on the enzyme used. Low concentrations of several restriction enzymes stimulated transformation, but of ten enzymes investigated only REMI with XhoI and KpnI resulted in single-copy integration of transforming DNA for the majority of transformants. For protoplast transformation with XhoI- or KpnI-based REMI, 50% and 76% of insertions, respectively, were due to integrations at a genomic enzyme site corresponding to the enzyme used for REMI. Electroporation of spores without addition of restriction enzyme resulted in a high transformation efficiency, with up to 67% of transformants containing a single copy of transforming DNA. In contrast to protoplast transformation, electroporation of spores in the presence of a restriction enzyme did not improve transformation efficiency or lead to insertion at genomic restriction sites. Southern analysis indicated that for both protoplast transformation with REMI using KpnI or XhoI and for electroporation of spores without addition of restriction enzymes, transforming DNA inserted at different genomic sites in a high proportion of transformants. Received: 6 March 1998 / Accepted: 25 May 1998     

Efficient plasmid transformation of the beta-lactam producer Streptomyces clavuligerus

The conditions for optimal formation and regeneration of protoplasts of Streptomyces clavuligerus were established. The optimal temperature for regeneration of protoplasts and for transformation was 26 degrees C in three different regeneration media. The best efficiency of transformation was obtained with 40% polyethylene glycol 1000. The efficiencies of regeneration and transformation increased greatly when protoplasts were obtained from cultures in the early stationary phase of growth. The number of transformants per assay increased linearly with rising concentrations of protoplasts. However, the number of transformants per protoplast decreased at concentrations of protoplasts above 1.5 X 10(9). The total number of transformants rose linearly at increasing plasmid DNA concentrations, but the number of the transformants per microgram of DNA became constant at concentrations above 1 microgram of DNA. Transformation frequencies as high as 5 X 10(5) transformants per microgram of DNA were obtained when plasmid pIJ702 was isolated from S. clavuligerus but not when isolated from Streptomyces lividans.     

Efficient plasmid transformation of the beta-lactam producer Streptomyces clavuligerus.

The conditions for optimal formation and regeneration of protoplasts of Streptomyces clavuligerus were established. The optimal temperature for regeneration of protoplasts and for transformation was 26 degrees C in three different regeneration media. The best efficiency of transformation was obtained with 40% polyethylene glycol 1000. The efficiencies of regeneration and transformation increased greatly when protoplasts were obtained from cultures in the early stationary phase of growth. The number of transformants per assay increased linearly with rising concentrations of protoplasts. However, the number of transformants per protoplast decreased at concentrations of protoplasts above 1.5 X 10(9). The total number of transformants rose linearly at increasing plasmid DNA concentrations, but the number of the transformants per microgram of DNA became constant at concentrations above 1 microgram of DNA. Transformation frequencies as high as 5 X 10(5) transformants per microgram of DNA were obtained when plasmid pIJ702 was isolated from S. clavuligerus but not when isolated from Streptomyces lividans.     

Optimum conditions for efficient transformation ofStreptomyces venezuelae protoplasts

Summary Optimum conditions for protoplast regeneration and transformation ofStreptomyces venezuelae ETH 14630 have been established. Protoplasts from mycelium grown to the stationary phase and treated with lysozyme in P medium under mild conditions gave the best regeneration frequency. Transformation of protoplasts with naked DNA was very efficient using either polyethylene glycol of mol. wt. 4000 or 6000, at concentrations of 28.5% or 36% (w/v) respectively. About 10⁵ transformants/g DNA could be isolated using protoplasts derived from cells cultivated to the early exponential growth phase in LB medium containing 0.2%-0.6% glycine and subsequently treated at 30°–32°C with 20 mg lysozyme/ml in P medium for 30 min. Selection of the transformants occurred on MRYE plates containing less than 10⁵ regenerating protoplasts per plate. Higher protoplast densities considerably decreased the regeneration frequency of the transformants.     

Optimum Conditions for Electric Pulse-mediated Gene Transfer to Bacillus subtilis Cells

It was found that plasmid DNA (pUB 110) can be introduced into not only protoplasts but also intact cells of Bacillus subtilis by electric field pulses. The transformation of, B. subtilis using protoplasts results in an efficiency of 2.5 × 10⁴ transformants per μg of DNA, with a single pulse of 50 jisec with an initial electric field strength of 7kV/cm. Even transformation of intact B. subtilis cells results in a maximum efficiency of 1.5 × 10³ transformants per μg DNA, with a single pulse of 400 μsec with an initial electric field strength of 16kV/cm. The cell survival of protoplasts and intact cells was approximately 100% and 30%, respectively, under the conditions found to be optimal for the transformation process. Plasmid DNA isolated from pUB 110 containing transformants was indistinguishable from authentic preparations of pBU 110 on gel electrophoretic analysis.     

High frequency transformation of Zymomonas mobilis by plasmid DNA

A rapid procedure that achieved high transformation frequencies of Zymomonas mobilis by a range of plasmids, was established. Using a hybrid plasmid, pNSW301, the highest frequency of transformation obtained was 1.8 × 10⁵ transformants per μg plasmid DNA. Transformation was also achieved, at high frequency, with a native Z. mobilis plasmid marked with a transposon, with large broad host range IncP-1 and IncW plasmids, and with small IncW cloning vectors.     

Polyethylene glycol-mediated transformation of fused egfp-hph gene under the control of gpd promoter in Pleurotus eryngii

Pleurotus eryngii was transformed using a polyethylene glycol-mediated method. A plasmid, pEPUGH, containing a reporter gene (enhanced green fluorescent protein gene, egfp) and a positive selectable marker gene (hygromycin phosphotransferase gene, hph) was constructed. The fused egfp-hph gene was placed under the control of the strong and constitutive native gpd promoter from P. eryngii. The recombinant plasmid was used to transform of P. eryngii protoplasts. Successful transformation was demonstrated by molecular analyses. Moreover, the mycelia of the transformants showed green epipolic dispersion on fluorescence microscopy. About 90–210 transformants were produced per μg plasmid DNA per 10⁷ viable protoplasts.     

Plasmid transformation of Streptococcus lactis protoplasts: optimization and use in molecular cloning

The parameters affecting polyethylene glycol-induced plasmid transformation of Streptococcus lactis LM0230 protoplasts were examined to increase the transformation frequency. In contrast to spreading protoplasts over the surface of an agar medium, their incorporation into soft agar overlays enhanced regeneration of protoplasts and eliminated variability in transformation frequencies. Polyethylene glycol with a molecular weight of 3,350 at a final concentration of 22.5% yielded optimal transformation. A 20-min polyethylene glycol treatment of protoplasts in the presence of DNA was necessary for maximal transformation. The number of transformants recovered increased as the protoplast and DNA concentration increased over a range of 3.0 X 10(6) to 3.0 X 10(8) protoplasts and 0.25 to 4.0 micrograms of DNA per assay, respectively. With these parameters, transformation was increased to 5 X 10(3) to 4 X 10(4) transformants per microgram of DNA. Linear and recombinant plasmid DNA transformed, but at frequencies 10- to 100-fold lower than that of covalently closed circular DNA. Transformation of recombinant DNA molecules enabled the cloning of restriction endonuclease fragments coding for lactose metabolism into S. lactis LM0230 with the Streptococcus sanguis cloning vector, pGB301. These results demonstrated that the transformation frequency is sufficient to clone plasmid-coded genes which should prove useful for strain improvement of dairy starter cultures.     

High-efficiency transformation of Bacillus subtilis NB22, an antifungal antibiotic iturin producer,by electroporation

High-voltage electroporation was used to transform Bacillus subtilis NB22, an antifungal antibiotic producer, reaching the efficiency of 10⁷ transformants/μg plasmid DNA. Transformation frequency was dependent on the composition of the electroporation solution, the electrical field strength and the cell concentration. Addition of polyethylene glycol (PEG) and mannitol in the transformation solution was critical for a high efficiency of transformation.     

Plasmid transformation of Streptococcus lactis protoplasts: optimization and use in molecular cloning.

The parameters affecting polyethylene glycol-induced plasmid transformation of Streptococcus lactis LM0230 protoplasts were examined to increase the transformation frequency. In contrast to spreading protoplasts over the surface of an agar medium, their incorporation into soft agar overlays enhanced regeneration of protoplasts and eliminated variability in transformation frequencies. Polyethylene glycol with a molecular weight of 3,350 at a final concentration of 22.5% yielded optimal transformation. A 20-min polyethylene glycol treatment of protoplasts in the presence of DNA was necessary for maximal transformation. The number of transformants recovered increased as the protoplast and DNA concentration increased over a range of 3.0 X 10(6) to 3.0 X 10(8) protoplasts and 0.25 to 4.0 micrograms of DNA per assay, respectively. With these parameters, transformation was increased to 5 X 10(3) to 4 X 10(4) transformants per microgram of DNA. Linear and recombinant plasmid DNA transformed, but at frequencies 10- to 100-fold lower than that of covalently closed circular DNA. Transformation of recombinant DNA molecules enabled the cloning of restriction endonuclease fragments coding for lactose metabolism into S. lactis LM0230 with the Streptococcus sanguis cloning vector, pGB301. These results demonstrated that the transformation frequency is sufficient to clone plasmid-coded genes which should prove useful for strain improvement of dairy starter cultures.     

Genetic introduction of foreign genes to <Emphasis Type="Italic">Pleurotus eryngii</Emphasis> by restriction enzyme-mediated integration

Pleurotus eryngii was transformed via restriction enzyme-mediated integration. In order to construct the transformation plasmid, the enhanced cyan fluorescent protein (ECFP) gene was ligated next to the gpd promoter of the plasmid pAN7-1. Transformation was facilitated via the heat treatment of a transformation mixture containing 1 μg of the HindIII-digested plasmid DNA and 10⁶ mushroom protoplasts in 40% polyethyleneglycol solution, resulting in 10–40 hygromycin-resistant transformants. Successful transformation was evidenced by PCR, Southern blot, and confocal fluorescence microscopic analyses on the selected transformants. To date, this is the first report on the transformation of P. eryngii by REMI technique.     

Transformation of the fungusPyrenopeziza brassicae,cause of light leaf spot of brassicas,and complementation of mutants using a genomic library

An efficient gene transfer system is a prerequisite for the molecular genetic analysis of pathogenicity and other genes of plant pathogens. A transformation procedure for the fungusPyrenopeziza brassicae was therefore devised. Three plasmids, encoding hygromycin resistance (pAN7-1, pAN7-2) or phleomycin resistance (pAN8-1), were used to transform conidial protoplasts ofP. brassicae in the presence of calcium chloride and polyethylene glycol. Transformation arose due to integration of transforming DNA, apparently at random sites, and multiple integration events were common. The frequency of transformation was variable but similar to that reported for other phytopathogenic fungi (up to 20 μg⁻¹ DNA) and was increased when homologous DNA was included in the vector. The pathogenicity of the transformants was unchanged by transformation and, when reisolated from inoculated host tissue, the transformants were found to have retained their antibiotic resistance. The transformation technique was used to complement adeninerequiring and extracellular enzyme-deficient, UV-induced mutants to prototrophy and extracellular protease production, respectively, with cosmids from a genomic library of the fungus.     

Heterologous transformation of Agrocybe aegerita with a bacterial neomycin-resistance gene fused to a fungal promoter-like DNA sequence

DNA sequences of the basidiomycete Agrocybe aegerita were cloned in E. coli based on their ability to drive the expression of the bacterial promoterless tetracycline (Tc)-resistance gene. A 0.48% frequency of the cloned sequences promoted antibiotic-resistance. The sequence conferring the highest Tc resistance (40 μg/ml) was selected to drive the expression in E. coli of two other promoterless genes encoding chloramphenicol and neomycin resistance. One of the derivative vectors, pN13-A2, carrying a chimeric neomycin-resistance gene, was used to transform an A. aegerita neomycin-sensitive strain by protoplast electroporation. Transformation frequencies ranged from 1 to 2.8 transformants per μg of DNA per 10³ viable cells, in a relatively high background of spontaneous-resistant colonies (2% of the surviving protoplasts). Molecular analyses showed that transformation had occurred by the integration of pN13-A2 sequences, either ectopically or at the resident locus carrying the A. aegerita promoter-like sequence, with probable molecular rearrangements. The nucleotide sequence of the promoter-like fragment revealed the presence of a CT motif that is known to be involved in a promoter function in some highly expressed genes of filamentous fungi.     

Transformation of Bacillus Protoplasts by Plasmid pTP4 DNA

Polyethylene glycol (PEG)-induced protoplast transformation by plasmid pTP4 DNA encoded chloramphenicol resistance determinant was developed for Bacillus subtilis, B. amyloliquefaciens, B. licheniformis, B. megaterium and B. pumilus. Protoplasts were formed by treatment of cells with lysozyme and the transformation frequencies (transformants per regenerants) were in the range of 1.3 × 10^?2 to 7.1 × 10^?1. Reisolated plasmid DNA prepared from transformants exhibited covalently closed and open circular forms similar to those of the donor DNA. These results indicate that PEG-induced protoplast transformation is an adequate method for plasmid transformation and pTP4 is a useful plasmid as a cloning vector in a wide range of varieties of the genus Bacillus.     

Protoplast transformation of recalcitrant alkaliphilic Bacillus sp. with methylated plasmid DNA and a developed hard agar regeneration medium

Among the diverse alkaliphilic Bacillus strains, only a little have been reported to be genetically transformed. In this study, an efficient protoplast transformation procedure was developed for recalcitrant alkaliphilic Bacillus sp. N16-5. The procedure involved polyethylene glycol-induced DNA uptake by the protoplasts and subsequent protoplast regeneration with a developed hard agar regeneration medium. An in vivo methylation strategy was introduced to methylate the exogenous plasmid DNA for improving the transformation efficiency. The transformation efficiency reached to 1.1×10(5) transformants per μg plasmid DNA with methylated plasmid pHCMC04 and the developed hard agar regeneration medium. This procedure might also be applicable to the genetic transformation of other Bacillus strains.     

Genetic Transformation System for the Fungal Soybean Pathogen Cercospora kikuchii

An altered β-tubulin gene that confers resistance to the fungicide benomyl was isolated from a genomic library of a UV-induced mutant of Cercospora kikuchii and used as a selectable marker for transformation. The level of benomyl resistance conferred to the transformants was at least 150-fold greater than the intrinsic resistance of the C. kikuchii recipient protoplasts. In the majority of cases, the tubulin fragment was integrated at the native β-tubulin locus, apparently by gene replacement or gene conversion. The frequency of transformation ranged from 0.2 to 6 transformants per μg of DNA, depending on the recipient strain. Transformation with linearized plasmid resulted in a higher frequency, without changing the type of integration event. Transformants were phenotypically stable after eight consecutive transfers on medium without benomyl. This is the first report of a genetic transformation system for a Cercospora species.