The blocked and methylated 5′ terminal sequence of a specific cellular messenger: the mRNA for silk fibroin of bombyx mori

The messenger RNA for silk fibroin, labeled with ³²PO₄ and methyl-³H L-methionine, was purified to near homogeneity from the posterior silk gland of the silkworm Bombyx mori, and the sequence of a methylated, RNAase T2-resistant structure was determined. This sequence is similar structurally to 5′ terminal blocked and methylated sequences found on the total populations of polyadenylated eucaryotic cellular and certain viral mRNAs. The RNAase T2-resistant oligomer from fibroin mRNA was cleaved by nuclease P1 into three components: a blocked and methylated sequence containing three phosphates; a 2′-0-methyl UMP residue (pU^m), and an unmethylated CMP (pC). The blocked and methylated sequence comigrated in three chromatographic systems with the blocked and methylated terminus of silkworm cytoplasmic polyhedrosis virus mRNA, which has the structure m⁷GpppA^m. The fibroin mRNA cap was cleaved by nucleotide pyrophosphatase to yield 7-methyl GMP (pm⁷G) and 2′-0-methyl AMP (pA^m). This sequence also appeared to be terminally located, with the m⁷G joined by a 5′-5′ pyrophosphate linkage to the A^m. It was concluded that the 5′ terminal sequence of fibroin mRNA molecules is m⁷G(5′)ppp(5′)A^mpU^mpCp. The regulation of expression of the highly specialized gene for fibroin is discussed in light of this finding.     

Nucleotide sequence of an endo-1,4-β-glucanase gene (celA) from Clostridium josui

The nucleotide sequence of a DNA fragment containing an endo-1,4-β-glucanase (EG-1) gene of Clostridium josui was determined by the dideoxy-chain termination method. The EG-1 coding sequence was an open reading frame encoding 369 amino acids, and a putative promoter sequence was located in the upstream region of the open reading frame. The N-terminal amino acid sequence of the endoglucanase (EG-1C) purified from the Escherichia coli transformant (JM103/pUCJ1) was consistent with the deduced sequence from ³⁰Val to ⁴⁴Lys. The estimated molecular weights of the precursor and the mature enzymes were 41,774 and 38,352, respectively. The region of amino acids from 61st to 335th of the enzyme revealed high homology with those of Bacillus sp. and Clostridium acetobutylicum endoglucanases.     

Complete amino acid sequence of Bombyx egg-specific protein deduced from cDNA clone

Complementary (c)DNA coding for an insect yolk protein, the egg-specific protein of the silkworm Bombyx mori was cloned and the nucleotide sequence determined. The sequence covers the entire coding region of 1,677 base pairs with 5′ and 3′ noncoding regions (21 and 115 base pairs, respectively). The deduced amino acid sequence of the egg-specific protein consists of 559 amino acid residues. The NH₂-terminal 18 amino acid sequence is enriched in hydrophobic amino acids and assumed to be a signal peptide. A sequence, Asn-X-Thr, a potential N-linked glycosylation site, is found at positions 191 to 193. A serine-rich domain is localized in the region from 63 to 90, in which phosphorylation takes place. Cys His motif in 405 to 415 is analogous to a proposed metal binding sequence. Lys¹³²-Asn¹³³ and Arg²²⁸-Asp²²⁹ are probably the sites cleaved by the egg-specific protein protease that appears during embryogenesis. The derived amino acid sequence has no appreciable homology to other sequenced proteins.     

Molecular cloning and expression in Escherichia coli of the structural gene for the hemolytic toxin aerolysin from Aeromonas hydrophila

Summary The structural gene for the hemolytic toxin aerolysin has been cloned into the plasmid vectors pBR322 and pEMBL8⁺. The gene was localized on the hybrid plasmids by analysis of plasmids generated by transposon mutagenesis. The sequence of the first 683 bases of an insert in pEMBL8⁺ was determined and shown to encode the amino terminus of the protein as well as a typical signal sequence of 23 amino acids. Aerolysin is produced by E. coli cells containing the cloned aerolysin gene and it is processed normally by removal of the signal sequence, however it is not released from the cell. The protein appears to be translocated across the inner membrane of E. coli as its signal sequence is removed and the processed protein can be released by osmotic shock.     

The ITS2 Database

The internal transcribed spacer 2 (ITS2) has been used as a phylogenetic marker for more than two decades. As ITS2 research mainly focused on the very variable ITS2 sequence, it confined this marker to low-level phylogenetics only. However, the combination of the ITS2 sequence and its highly conserved secondary structure improves the phylogenetic resolution¹ and allows phylogenetic inference at multiple taxonomic ranks, including species delimitation^2-8.The ITS2 Database⁹ presents an exhaustive dataset of internal transcribed spacer 2 sequences from NCBI GenBank¹¹ accurately reannotated¹⁰. Following an annotation by profile Hidden Markov Models (HMMs), the secondary structure of each sequence is predicted. First, it is tested whether a minimum energy based fold¹² (direct fold) results in a correct, four helix conformation. If this is not the case, the structure is predicted by homology modeling¹³. In homology modeling, an already known secondary structure is transferred to another ITS2 sequence, whose secondary structure was not able to fold correctly in a direct fold.The ITS2 Database is not only a database for storage and retrieval of ITS2 sequence-structures. It also provides several tools to process your own ITS2 sequences, including annotation, structural prediction, motif detection and BLAST¹⁴ search on the combined sequence-structure information. Moreover, it integrates trimmed versions of 4SALE^15,16 and ProfDistS¹⁷ for multiple sequence-structure alignment calculation and Neighbor Joining¹⁸ tree reconstruction. Together they form a coherent analysis pipeline from an initial set of sequences to a phylogeny based on sequence and secondary structure.In a nutshell, this workbench simplifies first phylogenetic analyses to only a few mouse-clicks, while additionally providing tools and data for comprehensive large-scale analyses.     

Identification and characterization of a defective SSV1 genome integrated into a tRNA gene in the archaebacterium Sulfolobus sp. B12

Summary Within the chromosome of the archaebacterium Sulfolobus sp. B12, a 7.4 kb region was identified which displayed extensive sequence similarities to the 15.5 kb genetic element SSV1 carried by the same strain both as a circular form and as a site-specifically integrated copy. DNA sequence analysis indicated that this 7.4 kb region (designated SSV1^intB) represented an SSV1-like element distinguishable from the full-length integrated copy (designated SSV1^intA) by extensive deletions and point mutations. The physical organization of DNA sequences of SSV1^intB indicated that this element was integrated at the same attP site as previously identified for SSV1^intA. A comparison of the DNA sequences at the left attachment sites of SSV1^intA and SSV1^intB revealed that they both represented very similar putative arginine tRNA genes followed by a 10 by inverted repeat sequence. S1 nuclease mapping experiments indicated that these tRNA genes are transcribed. Offprint requests to: W. Zillig     

The 20 bp, directly repeated DNA sequence of broad host range plasmid R1162 exerts incompatibility in vivo and inhibits R1162 DNA replication in vitro

Summary The broad host range plasmid R1162 contains a directly repeated, 20 bp DNA sequence in the region of the plasmid required in cis for replication and maintenance. This sequence has been chemically synthesized and cloned, and shown to be sufficient for expression of plasmid incompatibility. The sequence also inhibits replication of R1162 DNA in a cell-free system. The strengths of both these effects are determined by the number of direct repeats (DRs) present, and are also affected to similar degrees by different mutations within the repeated sequence. Several of the mutations were tested for their effect in cis on plasmid maintenance in the cell, and one was found to cause an increase in plasmid copy number. The results suggest that the direct repeats exert incompatibility by inhibiting DNA replication, presumably because they are the binding sites for a limiting essential protein.Abbreviations bp base pairs - Cb^r, Km^r, Sm^r resistance to carbenicillin, kanamycin, streptomycin, respectively - DR direct repeat     

Internally elongated rodent α-crystallin A chain: Resulting from incomplete RNA splicing?

αA^Ins, an elongated α-crystallin A chain previously observed in rat, was present beside the normal αA chain in mouse, gerbil and hamster, which places its origin at least 30 million years ago. Like in rat the sequences of golden hamster αA^Ins and αA were found to be identical, apart from the internal insertion of 22 residues in αA^Ins. The hamster chains only differed from the rat chains by a single substitution in the inserted sequence of αA^Ins. The origin of αA^Ins, by insertion of 22 residues in an otherwise unchanged αA chain, and its rigid evolutionary conservation are most easily explained by assuming the incomplete removal of a putative intervening sequence from the precursor mRNA of αA, leaving an intracistronic insert of 66 nucleotides in part of the eventually translated mRNA.     

Specific inhibition of the E.coli RecBCD enzyme by Chi sequences in single-stranded oligodeoxyribonucleotides

RecBCD is an ATP-dependent helicase and exonuclease which generates 3′ single-stranded DNA (ssDNA) ends used by RecA for homologous recombination. The exonuclease activity is altered when RecBCD encounters a Chi sequence (5′-GCTGGTGG-3′) in double-stranded DNA (ds DNA), an event critical to the generation of the 3′-ssDNA. This study tests the effect of ssDNA oligonucleotides having a Chi sequence (Chi⁺) or a single base change that abolishes the Chi sequence (Chi^o), on the enzymatic activities of RecBCD. Our results show that a 14 and a 20mer with Chi⁺ in the center of the molecule inhibit the exonuclease and helicase activities of RecBCD to a greater extent than the corresponding Chi^o oligonucleotides. Oligonucleotides with the Chi sequence at one end, or the Chi sequence alone in an 8mer, failed to show Chi-specific inhibition of RecBCD. Thus, Chi recognition requires that Chi be flanked by DNA at either end. Further experiments indicated that the oligonucleotides inhibit RecBCD from binding to its dsDNA substrate. These results suggest that a specific site for Chi recognition exists on RecBCD, which binds Chi with greater affinity than a non-Chi sequence and is probably adjacent to non-specific DNA binding sites.     

Internal sequence analysis of proteins eluted from polyacrylamide gels

We have developed an elution-digestion-sequencing (EDS) method, which yields the internal amino acid sequence of partially purified proteins. The overall yield for the method was greater than 60%. The method yielded peptide peaks that could be sequenced on HPLC for all tested proteins with masses from 45 to 200·10³ and yielded internal amino acid sequence information when as little as 10 pmol of partially purified protein was used as the starting material. The EDS method was extremely reliable and gave sequence information for each of 25 proteins tested, including high-molecular-mass proteins (M_r>100·10³) that were difficult to sequence by other methods.     

Purification,amino-terminal sequence and functional properties of a 64 kDa cytosolic protein from heart muscle capable of modulating calcium transport across the sarcoplasmic reticulumin vitro

In previous studies we have described the inhibitory action of a cytosolic protein fraction from heart muscle on ATP-dependent Ca²⁺ uptake by the sarcoplasmic reticulum (SR); further this inhibition was shown to be blocked by an inhibitor antagonist, also derived from the cytosol (Narayananet al., Biochim. Biophys. Acta. 735: 53–66, 1983; Can. J. Physiol. Pharmacol. 67: 999–1006, 1989). Here we report the complete purificationof the antagonist protein (AP) and characterization of its functional properties. AP was purified to homogeneity from rabbit heart cytosol using two procedures, one utilizing sequential DE52-cellulose and hydroxylapatite chromatography, and the other utilizing anion exchange chromatography on Mono Q^TM HR 5/5 column in a Pharmacia FPLC system. The purified AP has an apparent molecular weight of 64 kDa; it is made up of about 43% hydrophobic and 57% hydrophilic residues with the following amino-terminal sequence: E-A-H-K-S-E-I-A-H-R-F-N-D-V-G-E-E-H-F-I-G-L-V-L-I-T-F-S-Q-Y-L-Q-K-X-P-Y-E-E-H-A. This partial amino acid sequence data indicate strong sequence homology to serum albumin (sequence homology: 85% to rat serum albumin and 74% to sheep and bovine serum albumin). The purified AP caused concentration-dependent-blockade of the inhibition of Ca²⁺ uptake by SR observed in the presence of the cytosolic Ca²⁺ uptake inhibitor protein. This antagonist action of AP was markedly potentiated by calmodulin. AP did not influence the Ca²⁺ uptake activity of SR measured in the absence of the inhibitor protein and calmodulin. These observations suggest a likely physiological role for AP in the regulation of Ca²⁺ cycling by SR through a calmodulin-dependent mechanism     

Plant Growth Retarding Activity of the 4-Substituted-7-(β-d-ribofuranosyl)pyrrolo[2,3-d]pyrimidine Anticytokinins

Three protease inhibitors (OTI-1-3) have been purified from onion (Allium cepa L.) bulbs. Molecular masses of these inhibitors were found to be 7,370.2, 7,472.2, and 7,642.6 Da by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS), respectively. Based on amino acid composition and N-terminal sequence, OTI-1 and -2 are the N-terminal truncated proteins of OTI-3. All the inhibitors are stable to heat and extreme pH. OTI-3 inhibited trypsin, chymotrypsin, and plasmin with dissociation constants of 1.3×10^-9 M, 2.3×10^-7 M, and 3.1×10^-7 M, respectively. The complete amino acid sequence of OTI-3 showed a significant homology to Bowman-Birk family inhibitors, and the first reactive site (P₁) was found to be Arg¹⁷ by limited proteolysis by trypsin. The second reactive site (P₁) was estimated to be Leu⁴⁶, that may inhibit chymotrypsin. OTI-3 lacks an S-S bond near the second reactive site, resulting in a low affinity for the enzyme. The sequence of OTI-3 was also ascertained by the nucleotide sequence of a cDNA clone encoding a 101-residue precursor of the onion inhibitor.     

Identification and biochemical characterization of a GDSL-motif carboxylester hydrolase from Carica papaya latex

An esterase (CpEst) showing high specific activities on tributyrin and short chain vinyl esters was obtained from Carica papaya latex after an extraction step with zwitterionic detergent and sonication, followed by gel filtration chromatography. Although the protein could not be purified to complete homogeneity due to its presence in high molecular mass aggregates, a major protein band with an apparent molecular mass of 41 kDa was obtained by SDS-PAGE. This material was digested with trypsin and the amino acid sequences of the tryptic peptides were determined by LC/ESI/MS/MS. These sequences were used to identify a partial cDNA (679 bp) from expressed sequence tags (ESTs) of C. papaya. Based upon EST sequences, a full-length gene was identified in the genome of C. papaya, with an open reading frame of 1029 bp encoding a protein of 343 amino acid residues, with a theoretical molecular mass of 38 kDa. From sequence analysis, CpEst was identified as a GDSL-motif carboxylester hydrolase belonging to the SGNH protein family and four potential N-glycosylation sites were identified. The putative catalytic triad was localised (Ser³⁵-Asp³⁰⁷-His³¹⁰) with the nucleophile serine being part of the GDSL-motif. A 3D-model of CpEst was built from known X-ray structures and sequence alignments and the catalytic triad was found to be exposed at the surface of the molecule, thus confirming the results of CpEst inhibition by tetrahydrolipstatin suggesting a direct accessibility of the inhibitor to the active site.     

A novel kinetic mechanism explaining the non-hyperbolic behavior of metal activated enzymes. Case of choline kinase from rat liver

A novel kinetic mechanism that explains the non-hyperbolic kinetics of many metal- or effector-activated enzymes is proposed as an alternative to the allosteric, hysteresis and mnemonical models. In this mechanism, the non-Michaelian behavior is generated by a reversible binding of an essential metal cation or other effector to a single site, but to at least two different enzyme forms in steady state. The model is described by a higher degree rate equation since the metal binding to more than one enzyme form generates at least two steady-state catalytic pathways of different efficiencies in addition to the recycling of the metal-enzyme species in the kinetic sequence. The proposed mechanism also explains the transition from non-hyperbolic kinetics to a Michaelian rate law, as well as the dual activation and inhibition of enzymes by the metal cation or effector, according to its concentration. This kinetic behavior is generated by the participation of the metal or effector in fast and slow competing catalytic sequences or by the competitions produced by binding as a common reactant for both the forward and reverse reactions. The model can also explain some peculiar inhibition patterns observed for some transferases. This kinetic mechanism can be tested by an experimental protocol that includes the metal cation or effector as a controlled variable reactant. The model and its complete rate equation explains the non-Michaelian behavior of choline kinase. At low ligand concentrations, an effectively ordered terreactant sequential mechanism operates (Infant. & Kinsella, 1976). The steady-state addition of choline to free enzyme is followed by the rapid-equilibrium binding of MgATp^2? and the steady-state addition of Mg²⁺ last in the sequence. Initial velocity and product inhibition studies in the non-hyperbolic kinetic region, were consistent with a partially ordered release of reactants in which phosphocholine was the first product to dissociate from the central complex. The release sequence of the other two reactants was dependent on the prevailing Mg²⁺ concentration. At low Mg²⁺ levels, i.e. below 2·0 mM the metal cation is predominantly released after phosphocholine whereas MgADP^? is the last product to dissociate under rapid-equilibrium conditions. At higher levels of the metal cation, MgADP^? is predominantly released after phosphocholine leaving the Mg-enzyme complex from which Mg²⁺ may dissociate. However, a substantial fraction of the Mg-enzyme form is recycled in an alternate catalytic sequence in which the rapid-equilibrium binding MgATP^2? to the Mg-enzyme complex is followed by the steady-state addition of choline. This pathway can also be initiated by the binding of Mg²⁺ to free enzyme. A third and unique sequence, which operates at low Mg²⁺ concentrations, includes the participation of MgADP^? as an activator via a partial reversal of one of the product release sequences. In this pathway, the rapidequilibrium binding of MgADP^? to free enzyme is followed by the addition of Mg²⁺ to the resulting transitory complex. Subsequent dissociation of MgADP^? leaves the Mg-enzyme form, which is then channeled to product formation by the consecutive additions of MgATP^2? and choline.