The effect of Galleria mellonella apolipophorin III on yeasts and filamentous fungi

Galleria mellonella apolipophorin III (apoLp-III) has been implicated in the innate immune response against bacterial infections. The protein binds components of bacterial cell wall and inhibits growth of selected Gram-positive and Gram-negative bacteria. Interaction of apoLp-III with fungal β-1,3-glucan suggests antifungal properties of the protein. In the present study, the effect of apoLp-III on the growth, metabolic activity and cell surface characteristics of selected yeasts and filamentous fungi was investigated using light, confocal and atomic force microscopy. ApoLp-III bound to the cell surface of different yeasts and filamentous fungi as confirmed by immunoblotting with anti-apoLp-III antibodies. Incubation of the fungi in the presence of apoLp-III induced alterations in growth morphology. Candida albicans underwent transition from yeast-like to hyphal growth with formation of true hyphae, whereas Fusarium oxysporum hyphae exhibited decreased metabolic activity, increased vacuolization and appearance of numerous monophialids with microconidia. Atomic force microscopy imaging demonstrated evident alterations in the fungal cell surface after incubation with apoLp-III, suggesting that the protein affected the cell wall components.     

Involvement of apolipophorin III in antibacterial defense of Galleria mellonella larvae

Apolipophorin III (apoLp-III) is an abundant hemolymph protein involved in lipid transport and immune response in insects. We investigated involvement of apoLp-III in the antibacterial response in Galleria mellonella larvae. Immune challenge with Gram-negative (Escherichia coli, Klebsiella pneumoniae) and Gram-positive (Micrococcus luteus) bacteria led to an increase in the level of apoLp-III in G. mellonella hemolymph, 0.5-2h and 8h after treatment, respectively. ApoLp-III purified from larval hemolymph as well as that present in hemolymph extracts adsorbed on the surface of different bacteria. The adsorption capacity of apoLp-III on bacterial cells prompted us to investigate the effect of this phenomenon on bacterial growth. Our results demonstrate antibacterial activity of apoLp-III against selected Gram-positive and Gram-negative bacteria in vitro. Among bacteria tested, Salmonella typhimurium and K. pneumoniae were the most sensitive to apoLp-III. LIVE/DEAD staining of bacteria incubated with purified apoLp-III revealed their growth inhibition; however, neither morphological changes in the cell shape nor formation of cell aggregates was noticed. The results suggest that apoLp-III is a multifunctional protein in G. mellonella hemolymph.     

Galleria mellonella apolipophorin III – an apolipoprotein with anti-Legionella pneumophila activity

The greater wax moth Galleria mellonella has been exploited worldwide as an alternative model host for studying pathogenicity and virulence factors of different pathogens, including Legionella pneumophila, a causative agent of a severe form of pneumonia called Legionnaires' disease. An important role in the insect immune response against invading pathogens is played by apolipophorin III (apoLp-III), a lipid- and pathogen associated molecular pattern-binding protein able to inhibit growth of some Gram-negative bacteria, including Legionella dumoffii. In the present study, anti-L. pneumophila activity of G. mellonella apoLp-III and the effects of the interaction of this protein with L. pneumophila cells are demonstrated. Alterations in the bacteria cell surface occurring upon apoLp-III treatment, revealed by Fourier transform infrared (FTIR) spectroscopy and atomic force microscopy, are also documented. ApoLp-III interactions with purified L. pneumophila LPS, an essential virulence factor of the bacteria, were analysed using electrophoresis and immunoblotting with anti-apoLp-III antibodies. Moreover, FTIR spectroscopy was used to gain detailed information on the type of conformational changes in L. pneumophila LPS and G. mellonella apoLp-III induced by their mutual interactions. The results indicate that apoLp-III binding to components of bacterial cell envelope, including LPS, may be responsible for anti-L. pneumophila activity of G. mellonella apoLp-III.     

Comparison of atomic force microscopy interaction forces between bacteria and silicon nitride substrata for three commonly used immobilization methods

Atomic force microscopy (AFM) has emerged as a powerful technique for mapping the surface morphology of biological specimens, including bacterial cells. Besides creating topographic images, AFM enables us to probe both physicochemical and mechanical properties of bacterial cell surfaces on a nanometer scale. For AFM, bacterial cells need to be firmly anchored to a substratum surface in order to withstand the friction forces from the silicon nitride tip. Different strategies for the immobilization of bacteria have been described in the literature. This paper compares AFM interaction forces obtained between Klebsiella terrigena and silicon nitride for three commonly used immobilization methods, i.e., mechanical trapping of bacteria in membrane filters, physical adsorption of negatively charged bacteria to a positively charged surface, and glutaraldehyde fixation of bacteria to the tip of the microscope. We have shown that different sample preparation techniques give rise to dissimilar interaction forces. Indeed, the physical adsorption of bacterial cells on modified substrata may promote structural rearrangements in bacterial cell surface structures, while glutaraldehyde treatment was shown to induce physicochemical and mechanical changes on bacterial cell surface properties. In general, mechanical trapping of single bacterial cells in filters appears to be the most reliable method for immobilization.     

Comparison of Atomic Force Microscopy Interaction Forces between Bacteria and Silicon Nitride Substrata for Three Commonly Used Immobilization Methods

Atomic force microscopy (AFM) has emerged as a powerful technique for mapping the surface morphology of biological specimens, including bacterial cells. Besides creating topographic images, AFM enables us to probe both physicochemical and mechanical properties of bacterial cell surfaces on a nanometer scale. For AFM, bacterial cells need to be firmly anchored to a substratum surface in order to withstand the friction forces from the silicon nitride tip. Different strategies for the immobilization of bacteria have been described in the literature. This paper compares AFM interaction forces obtained between Klebsiella terrigena and silicon nitride for three commonly used immobilization methods, i.e., mechanical trapping of bacteria in membrane filters, physical adsorption of negatively charged bacteria to a positively charged surface, and glutaraldehyde fixation of bacteria to the tip of the microscope. We have shown that different sample preparation techniques give rise to dissimilar interaction forces. Indeed, the physical adsorption of bacterial cells on modified substrata may promote structural rearrangements in bacterial cell surface structures, while glutaraldehyde treatment was shown to induce physicochemical and mechanical changes on bacterial cell surface properties. In general, mechanical trapping of single bacterial cells in filters appears to be the most reliable method for immobilization.     

Apolipophorin-III affects the activity of the haemocytes of Galleria mellonella larvae

Apolipophorin-III (apoLp-III) impaired the adhesion of plasmatocytes and a granular cell-subpopulation of larval Galleria mellonella to glass slides. The protein bound to haemocytes, limited the responses of the plasmatocytes to Bacillus subtilis and increased the percentage of a subgroup of granular cells with adhering bacteria. The total number of bacteria adhering to all the haemocytes on the slides declined. Injections of apoLp-III slowed bacterial removal from the haemolymph without affecting total haemocyte counts and impaired haemocyte attachment to glass slides. Purified apoLp-III bound to B. subtilis. ApoLp-III in serum bound to bacteria within 5 min, peaked at 15 min and was either shed or dissociated by 60 min. ApoLp-III bound to B. subtilis lowered the adhesion of the bacteria to the haemocytes and slowed the removal of the bacteria from the haemolymph.     

Synergistic action of Galleria mellonella anionic peptide 2 and lysozyme against Gram-negative bacteria

Lysozyme and antimicrobial peptides are key factors of the humoral immune response in insects. In the present work lysozyme and anionic defense peptide (GMAP2) were isolated from the hemolymph of the greater wax moth Galleria mellonella and their antibacterial activity was investigated. Adsorption of G. mellonella lysozyme on the cell surface of Gram-positive and Gram-negative bacteria was demonstrated using immunoblotting with anti-G. mellonella lysozyme antibodies. Lysozyme effectively inhibited the growth of selected Gram-positive bacteria, which was accompanied by serious alterations of the cell surface, as revealed by atomic force microscopy (AFM) imaging. G. mellonella lysozyme used in concentrations found in the hemolymph of naive and immunized larvae, perforated also the Escherichia coli cell membrane and the level of such perforation was considerably increased by GMAP2. GMAP2 used alone did not perforate E. coli cells nor influence lysozyme muramidase activity. However, the peptide induced a decrease in the turgor pressure of the bacterial cell. Moreover, in the samples of bacteria treated with a mixture of lysozyme and GMAP2 the sodium chloride crystals were found, suggesting disturbance of ion transport across the membrane leading to cell disruption. These results clearly indicated the synergistic action of G. mellonella lysozyme and anionic peptide 2 against Gram-negative bacteria. The reported results suggested that, thanks to immune factors constitutively present in hemolymph, G. mellonella larvae are to some extent protected against infection caused by Gram-negative bacteria.     

The lipid composition of Legionella dumoffii membrane modulates the interaction with Galleria mellonella apolipophorin III

Apolipophorin III (apoLp-III), an insect homologue of human apolipoprotein E (apoE), is a widely used model protein in studies on protein–lipid interactions, and anti-Legionella activity of Galleria mellonella apoLp-III has been documented. Interestingly, exogenous choline-cultured Legionella dumoffii cells are considerably more susceptible to apoLp-III than non-supplemented bacteria. In order to explain these differences, we performed, for the first time, a detailed analysis of L. dumoffii lipids and a comparative lipidomic analysis of membranes of bacteria grown without and in the presence of exogenous choline. ³¹P NMR analysis of L. dumoffii phospholipids (PLs) revealed a considerable increase in the phosphatidylcholine (PC) content in bacteria cultured on choline medium and a decrease in the phosphatidylethanolamine (PE) content in approximately the same range. The interactions of G. mellonella apoLp-III with lipid bilayer membranes prepared from PLs extracted from non- and choline-supplemented L. dumoffii cells were examined in detail by means of attenuated total reflection- and linear dichroism-Fourier transform infrared spectroscopy. Furthermore, the kinetics of apoLp-III binding to liposomes formed from L. dumoffii PLs was analysed by fluorescence correlation spectroscopy and fluorescence lifetime imaging microscopy using fluorescently labelled G. mellonella apoLp-III. Our results indicated enhanced binding of apoLp-III to and deeper penetration into lipid membranes formed from PLs extracted from the choline-supplemented bacteria, i.e. characterized by an increased PC/PE ratio. This could explain, at least in part, the higher susceptibility of choline-cultured L. dumoffii to G. mellonella apoLp-III.     

Photoinactivation effects of hematoporphyrin monomethyl ether on Gram-positive and -negative bacteria detected by atomic force microscopy

The photodynamic antimicrobial chemotherapy as a promising approach for efficiently killing pathogenic microbes is attracting increasing interest. In this study, the cytotoxic and phototoxic effects of hematoporphyrin monomethyl ether (HMME) on the Gram-positive and Gram-negative bacteria were investigated. The cell viability was assessed by colony-forming unit method, and the results indicated that there was no significant cytotoxicity but high phototoxicity in the examined concentrations. Notably, the Gram-positive bacteria were more sensitive to HMME in phototoxicity. Simultaneously, an atomic force microscope (AFM) was used to detect the changes in morphological and nanomechanical properties of bacteria before and after HMME treatment. AFM images indicate that upon photoinactivation, the bacterial surface changed from a smooth, homogeneous architecture to a heterogenous, crackled morphology. The force spectroscopy measurements reveal that the cell wall became less rigid and the Young’s modulus decreased about 50%, whereas the tip-cell-surface adhesion forces increased significantly compared to those of native cells. It was speculated that the photodynamic effects of HMME induced the changes in the chemical composition of the outer membrane and exposure of some proteins inside the envelope. AFM can be utilized as a powerful and sensitive method for studying the interaction between bacteria and drugs.     

Comparative studies of bacterial biofilms on steel surfaces using atomic force microscopy and environmental scanning electron microscopy

Environmental scanning electron microscopy (ESEM) and atomic force microscopy (AFM) were compared as tools for the observation of bacterial biofilms developed on carbon steel and AISI 316 stainless steel surfaces under stagnant conditions. Biofilms were generated in batch cultures of two different isolates of marine sulphate reducing bacteria (SRB) and in cultures consisting of mixed populations of acidophilic bacteria, known as "acid streamers";. Imaging of single SRB cells on mica was also carried out to reveal the surface topography of individual bacterial cells at nanometre resolution. Following the removal of biofilms, the stainless steel surfaces were profiled using AFM to determine the degree of steel deterioration. ESEM and AFM studies of bacterial biofilms in-situ, gave both qualitative and quantitative information on biofilm structure at high resolution. The use of AFM image analysis software allowed estimation of the width and height of bacterial cells, the thickness and width of exopolymeric (EPS) capsule and bacterial flagella, as well as characterisation of the surface roughness of the steel, including measurements of depth and diameter of individual pits. Exposure of stainless steel specimens to acid streamers resulted in a significant increase in the surface roughness of the steel, compared to specimens placed in sterile medium.     

Monitoring surface chemical changes in the bacterial cell wall: multivariate analysis of cryo-x-ray photoelectron spectroscopy data

Gram-negative bacteria can alter the composition of the lipopolysaccharide (LPS) layer of the outer membrane as a response to different growth conditions and external stimuli. These alterations can, for example, promote attachment to surfaces and biofilm formation. The changes occur in the outermost layer of the cell and may consequently influence interactions between bacterial cells and surrounding host tissue, as well as other surfaces. Microscopic analyses, fractionation of bacterial cells, or other traditional microbiological assays have previously been used to study these alterations. These methods can, however, be time consuming and do not always give detailed chemical information about the bacterial cell surface. We here present an analytical method that provides chemical information on the outermost portion of bacterial cells with respect to protein, peptidoglycan, lipid, and polysaccharide content. The method involves cryo-x-ray photoelectron spectroscopy analyses of the outermost portion (within ～10 nm of the surface) of intact bacterial cells followed by a multivariate curve resolution analysis of carbon spectra. It can be used as a tool for characterizing and monitoring variations in the chemical composition of bacterial cell walls or of isolated outer membrane vesicles, variations that result from e.g. mutations or external stimuli. The method enabled us to predict accurately the alterations in polysaccharide content and surface chemistries of a set of well characterized Escherichia coli LPS mutants. The described approach may moreover be applied to monitor surface chemical composition of other biological samples.     

Dynamics of the Antimicrobial Peptide PGLa Action on Escherichia coli Monitored by Atomic Force Microscopy

Summary Atomic force microscopy (AFM) images of living cells in physiological solution were used to monitor the different stages involved in the interaction between Escherichia coli and the antimicrobial peptide PGLa. Damage on bacterial membranes was observed in the past using standard electron microscopy; stiffness measurements and images scanned in physiological solution demonstrate the advantage of AFM for such studies. From force versus separation curve measurements it is possible to determine the variation of the cellular stiffness. PGLa action on components of the cell structure like the outer membrane, the bacterial pili, the peptidoglycan wall and the inner membrane was determined by the comparison of AFM images of bacteria before and after PGLa addition. The interaction of Escherichia coli with PGLa in the culture medium has two stages. The first is characterized by the loss of surface stiffness and the formation of micelles probably originating from the disruption of the outer membrane and the loss of the bacteria’s ability to adhere to the substrates. In the second stage there is further damage, which resulted in total cell rupture. AFM images of bacteria in air and surface roughness measurements were also used to estimate peptide damage.     

Atomic force microscopy of Mammalian urothelial surface

The mammalian urothelium apical surface plays important roles in bladder physiology and diseases, and it provides a unique morphology for ultrastructural studies. Atomic force microscopy (AFM) is an emerging tool for studying the architecture and dynamic properties of biomolecular structures under near-physiological conditions. However, AFM imaging of soft tissues remains a challenge because of the lack of efficient methods for sample stabilization. Using a porous nitrocellulose membrane as the support, we were able to immobilize large pieces of soft mouse bladder tissue, thus enabling us to carry out the first AFM investigation of the mouse urothelial surface. The submicrometer-resolution AFM images revealed many details of the surface features, including the geometry of the urothelial plaques that cover the entire surface and the membrane interdigitation at the cell borders. This interdigitation creates a membrane zipper, likely contributing to the barrier function of the urothelium. In addition, we were able to image the intracellular bacterial communities of type 1-fimbriated bacteria grown between the intermediate filament bundles of the umbrella cells, shedding light on the bacterial colonization of the urothelium.     

Surface structure and nanomechanical properties of Shewanella putrefaciens bacteria at two pH values (4 and 10) determined by atomic force microscopy

The nanomechanical properties of gram-negative bacteria (Shewanella putrefaciens) were investigated in situ in aqueous solutions at two pH values, specifically, 4 and 10, by atomic force microscopy (AFM). For both pH values, the approach force curves exhibited subsequent nonlinear and linear regimens that were related to the progressive indentation of the AFM tip in the bacterial cell wall, including a priori polymeric fringe (nonlinear part), while the linear part was ascribed to compression of the plasma membrane. These results indicate the dynamic of surface ultrastructure in response to changes in pH, leading to variations in nanomechanical properties, such as the Young's modulus and the bacterial spring constant.     

Bacterial surface appendages strongly impact nanomechanical and electrokinetic properties of Escherichia coli cells subjected to osmotic stress

The physicochemical properties and dynamics of bacterial envelope, play a major role in bacterial activity. In this study, the morphological, nanomechanical and electrohydrodynamic properties of Escherichia coli K-12 mutant cells were thoroughly investigated as a function of bulk medium ionic strength using atomic force microscopy (AFM) and electrokinetics (electrophoresis). Bacteria were differing according to genetic alterations controlling the production of different surface appendages (short and rigid Ag43 adhesins, longer and more flexible type 1 fimbriae and F pilus). From the analysis of the spatially resolved force curves, it is shown that cells elasticity and turgor pressure are not only depending on bulk salt concentration but also on the presence/absence and nature of surface appendage. In 1 mM KNO(3), cells without appendages or cells surrounded by Ag43 exhibit large Young moduli and turgor pressures (～700-900 kPa and ～100-300 kPa respectively). Under similar ionic strength condition, a dramatic ～50% to ～70% decrease of these nanomechanical parameters was evidenced for cells with appendages. Qualitatively, such dependence of nanomechanical behavior on surface organization remains when increasing medium salt content to 100 mM, even though, quantitatively, differences are marked to a much smaller extent. Additionally, for a given surface appendage, the magnitude of the nanomechanical parameters decreases significantly when increasing bulk salt concentration. This effect is ascribed to a bacterial exoosmotic water loss resulting in a combined contraction of bacterial cytoplasm together with an electrostatically-driven shrinkage of the surface appendages. The former process is demonstrated upon AFM analysis, while the latter, inaccessible upon AFM imaging, is inferred from electrophoretic data interpreted according to advanced soft particle electrokinetic theory. Altogether, AFM and electrokinetic results clearly demonstrate the intimate relationship between structure/flexibility and charge of bacterial envelope and propensity of bacterium and surface appendages to contract under hypertonic conditions.     

Expressed protein ligation using an N-terminal cysteine containing fragment generated in vivo from a pelB fusion protein

Advances in expressed protein ligation (EPL) methods that permit specific introduction of unique modifications into proteins have facilitated protein engineering, structure-function and protein interaction studies. An EPL-generated hybrid exchangeable apolipoprotein has been constructed from recombinant fragments of apolipoprotein E (apoE) and apolipophorin III (apoLp-III). A recombinant fusion protein comprised of human apoE N-terminal residues 1-111, a modified Saccharomyces cerevisiae intein and a chitin binding domain was subjected to 2-mercaptoethanesulfonic acid (MESNA) induced cleavage to generate apoE(1-111)-MESNA. A second fusion protein was comprised of a bacterial pelB leader peptide fused to a variant form of Galleria mellonella apoLp-III residues 1-91. The N-terminal pelB leader sequence directed the newly synthesized fusion protein to the Escherichia coli perisplamic space where endogenous leader peptidase cleavage generated the desired N-terminal cysteine-containing protein fragment. The resulting apoLp-III fragment, which contained no sequence tags or tails, escaped the bacteria and accumulated in the culture medium. When cultured in M9 minimal medium, Asp1Cys apoLp-III(1-91) was produced in high yield and was the sole major protein in the culture supernatant. Ligation reactions with apoE(1-111)-MESNA yielded an engineered hybrid apolipoprotein. The results document the utility of the pelB fusion protein system for generating active N-terminal cysteine containing proteins for EPL applications.     

<Emphasis Type="Italic">Escherichia coli,Pseudomonas aeruginosa</Emphasis>, and<Emphasis Type="Italic"> Staphylococcus aureus</Emphasis> Attachment Patterns on Glass Surfaces with Nanoscale Roughness

Attachment tendencies of Escherichia coli K12, Pseudomonas aeruginosa ATCC 9027, and Staphylococcus aureus CIP 68.5 onto glass surfaces of different degrees of nanometer-scale roughness have been studied. Contact-angle and surface-charge measurements, atomic force microscopy (AFM), scanning electron microscopy (SEM), and confocal laser scanning microscopy (CLSM) were employed to characterize substrata and bacterial surfaces. Modification of the glass surface resulted in nanometer-scale changes in the surface topography, whereas the physicochemical characteristics of the surfaces remained almost constant. AFM analysis indicated that the overall surface roughness parameters were reduced by 60–70%. SEM, CLSM, and AFM analysis clearly demonstrates that although E. coli, P. aeruginosa and S. aureus present significantly different patterns of attachment, all of the species exhibited a greater propensity for adhesion to the “nano-smooth” surface. The bacteria responded to the surface modification with a remarkable change in cellular metabolic activity, as shown by the characteristic cell morphologies, production of extracellular polymeric substances, and an increase in the number of bacterial cells undergoing attachment.     

Hemagglutinating properties of apolipophorin III from the hemolymph of Galleria mellonella larvae

In search for factors that cause encapsulation of foreign bodies in insect hemolymph we discovered that larval hemolymph of Galleria mellonella caused aggregation of mammalian erythrocytes. The hemagglutinating agent was identified as an 18-kDa protein that did not react with lectins. The sequence of 81 amino acids in three protein fragments and the properties of the protein revealed that it was Galleria homologue of apolipophorin III (apoLp-III*). ApoLp-III was found in high amounts in the hemolymph of Galleria larvae, pupae, and adults, as well as in the molting fluid. The hemagglutinating action of the whole hemolymph or the purified apoLp-III was independent of the presence of sugars in the medium. This indicated that it was not mediated by carbohydrates on the erythrocyte surface. The hemagglutination was inhibited at low pH (3.0), in the absence of calcium ions, and in the presence of certain bacterial lipopolysaccharides or their essential component, the 2-keto-3-deoxyoctonate-3-deoxyoctulosonic acid (KDO). It is suggested that interaction of apoLp-III with lipopolysaccharides in bacterial cell walls may play a role in insect immune reactions. Arch. Insect Biochem. Physiol. 38:119–125, 1998. © 1998 Wiley-Liss, Inc.     

Interaction of locust apolipophorin III with lipoproteins and phospholipid vesicles: effect of glycosylation

Apolipophorin III (apoLp-III) from Locusta migratoria is an exchangeable apolipoprotein that binds reversibly to lipoprotein surfaces. The native protein is glycosylated at Asn-18 and Asn-85. Variable attachment of five distinct oligosaccharide moieties at the two glycosylation sites results in molecular weight heterogeneity, as seen by mass spectrometry. The main mass peak of 20,488 Da decreases to 17,583 Da after removal of carbohydrate, indicating that apoLp-III carbohydrate mass is approximately 14% by weight. Deglycosylated apoLp-III induced clearance of dimyristoylphosphatidylcholine and dimyristoylphosphatidylglycerol vesicles at a faster rate than glycosylated apoLp-III. However, in lipoprotein binding assays, in which apoLp-III interacts with surface-localized diacylglycerol, only minor differences in binding were observed. The fluorescence properties of 1-anilinonaphthalene-8-sulfonate were unaffected by the glycosylation state of apoLp-III, indicating that no changes in the relative amount of exposed hydrophobic surface occurred as a result of carbohydrate removal. We propose that glycosyl moieties affect the ability of apoLp-III to transform phospholipid bilayer vesicles into disc-like complexes by steric hindrance. This is due to the requirement that apoLp-III penetrate the bilayer substrate prior to conformational opening of the helix bundle. On the other hand, the glycosyl moieties do not affect lipoprotein binding interactions as it does not involve deep protein penetration into the lipid milieu. Rather, lipoprotein binding is based on oriented protein contact with the lipid surface followed by opening of the helix bundle, which allows formation of a stable interaction with surface exposed hydrophobic sites.