Fluoride-18 radiolabeling of peptides bearing an aminooxy functional group to a prosthetic ligand via an oxime bond

We have developed a novel F-18 prosthetic ligand named fluoro-PEG-benzaldehyde (FPBA) 1. [(18)F]-FPBA 1 is formed in situ from its radiolabeled precursor [(18)F]6. Compound 6 is efficiently synthesized in four steps starting from commercially available 6-bromo-3-pyridine carbaldehyde 2. [(18)F]-FPBA was evaluated as a prosthetic ligand to radiolabel three cyclic peptides bearing an aminooxy functional group at the N-terminus position. Acetal [(18)F]6 is purified by either solid-phase extraction (SPE) or reverse-phase HPLC with the overall radiochemical yields (RCY) and radiochemical purity (RCP) in very close agreement. The SPE purification process has the advantage of shorter reaction times (71-87 min for entire reaction sequence), while the use of the reverse-phase HPLC purification process allows the use of up to fifty times less of the expensive synthetic peptides (~ 50 nmol) in the oxime coupling reaction. We have demonstrated an efficient methodology in the production of [(18)F]-FPBA 1 and demonstrated its use as a prosthetic ligand for the labeling of peptides possessing an aminooxy functional group.     

18F]azadibenzocyclooctyne ([18F]ADIBO): a biocompatible radioactive labeling synthon for peptides using catalyst free [3+2] cycloaddition

N-Terminally azido-modified peptides were labeled with the novel prosthetic labeling synthon [(18)F]azadibenzocyclooctyne ([(18)F]ADIBO) using copper-free azide-alkyne [3+2]-dipolar cycloaddition in high radiochemical yields (RCYs). (18)F-Labeled [(18)F]ADIBO was prepared by nucleophilic substitution of the corresponding tosylate in 21% overall RCY (EOB) in a fully automated synthesis unit within 55 min. [(18)F]ADIBO was incubated with azide-containing peptides at room temperature in the absence of toxic metal catalysts and the formation of the triazole conjugate was confirmed. Finally, the azide-alkyne [3+2]-dipolar cycloaddition was shown to proceed with 95% radiochemical yield in ethanol within 30 min, allowing for a development of a kit-like peptide labeling approach with [(18)F]ADIBO.     

N-Succinimidyl 4-[(18)F]-fluoromethylbenzoate-labeled dimeric RGD peptide for imaging tumor integrin expression

RGD peptides, radiolabeled with (18)F, have been used in the clinic for PET imaging of tumor angiogenesis in cancer patients. RGD peptides are typically labeled using a prosthetic group such as N-succinimidyl 4-[(18)F]-fluorobenzoate ([(18)F]SFB) or 4-nitrophenyl 2-[(18)F]-fluoropropionate ([(18)F]NPFP). However, the complex radiosynthetic procedures have impeded their broad application in clinical studies. We previously radiolabeled proteins and peptides with the prosthetic group, N-succinimidyl 4-[(18)F]-fluoromethylbenzoate ([(18)F]SFMB), which was prepared in a simple one-step procedure. In this study, we labeled a PEGylated cyclic RGD peptide dimer, PEG(3)-E[c(RGDyK)](2) (PRGD2), using [(18)F]SFMB and evaluated for imaging tumor αvβ3 integrin expression with positron emission tomography (PET). [(18)F]SFMB was prepared in one step using [(18)F]fluoride displacement of a nitrobenzenesulfonate leaving group under mild reaction conditions followed by HPLC purification. The (18)F-labeled peptide, [(18)F]FMBPRGD2 was prepared by coupling PRGD2 with [(18)F]SFMB in pH 8.6 borate buffer and purified with HPLC. The direct labeling on BMBPRGD2 was also attempted. A Siemens Inveon PET was used to image the uptake of the [(18)F]FMBPRGD2 into a U87MG xenograft mouse model. [(18)F]FMBPRGD2, was prepared with a 15% overall radiochemical yield (uncorrected) in a total synthesis time of 90?min, which was considerably shorter than the preparation of [(18)F]SFB- and [(18)F]NPFP-labeled RGD peptides. The direct labeling, however, was not successful. High quality microPET images using [(18)F]FMBPRGD2 clearly visualized tumors by 15?min with good target to background ratio. Early tracer accumulation in the bladder suggests fast renal clearance. No obvious bone uptake can be detected even at 4-h time point indicating that fluorine attachment is stable in mice. In conclusion, N-succinimidyl 4-[(18)F]-fluoromethylbenzoate ([(18)F]SFMB) prosthetic group can be a good alternative for labeling RGD peptides to image αvβ3 integrin expression and for labeling other peptides.     

Radiosynthesis and biodistribution of cyclic RGD peptides conjugated with novel [18F]fluorinated aldehyde-containing prosthetic groups

Achieving high-yielding, robust, and reproducible chemistry is a prerequisite for the (18)F-labeling of peptides for quantitative receptor imaging using positron emission tomography (PET). In this study, we extend the toolbox of oxime chemistry to include the novel prosthetic groups [(18)F]-(2-{2-[2-(2-fluoroethoxy)ethoxy]ethoxy}ethoxy)acetaldehyde, [(18)F]5, and [(18)F]-4-(3-fluoropropoxy)benzaldehyde, [(18)F]9, in addition to the widely used 4-[(18)F]fluorobenzaldehyde, [(18)F]12. The three (18)F-aldehydes were conjugated to the same aminooxy-bearing RGD peptide and the effect of the prosthetic group on biodistribution and tumor uptake studied in mice. The peptide conjugate [(18)F]7 was found to possess superior in vivo pharmacokinetics with higher tumor to blood, tumor to liver, tumor to muscle, and tumor to lung ratios than either [(18)F]10 or [(18)F]13. The radioactivity from the [(18)F]7 conjugate excreted more extensively through the kidney route with 79%id passing through the urine and bladder at the 2 h time point compared to around 55%id for the more hydrophobic conjugates [(18)F]10 and [(18)F]13. The chemical nature of a prosthetic group can be employed to tailor the overall biodistribution profile of the radiotracer. In this example, the hydrophilic nature of the ethylene glycol containing prosthetic group [(18)F]5 clearly influences the overall excretion pattern for the RGD peptide conjugate.     

18F-fluorothiols: a new approach to label peptides chemoselectively as potential tracers for positron emission tomography

[(18)F]Fluorothiols are a new generation of peptide labeling reagents. This article describes the preparation of suitable methanesulfonyl precursors and their use in no-carrier-added radiosyntheses of (18)F-fluorothiols. The preparations of (3-[(18)F]fluoropropylsulfanyl)triphenylmethane, (2-[2-[2-(2-[(18)F]fluoroethoxy)ethoxy]ethoxy]ethylsulfanyl)triphenylmethane, and 4-[(18)F]fluoromethyl-N-[2-triphenylmethanesulfanyl)ethyl]benzamide starting from the corresponding methanesulfonyl precursors were investigated. Following the removal of the triphenylmethane protecting group, the (18)F-fluorothiols were reacted with the N-terminal chloroacetylated model peptide ClCH(2)C(O)-LysGlyPheGlyLys. The corresponding radiochemical yields of (18)F-labeled isolated model peptide, decay-corrected to (18)F fluoride, were 10%, 32%, and 1%, respectively. These results indicate a considerable potential of (18)F-fluorothiols for the chemoselective labeling of peptides as tracers for positron emission tomography (PET).     

Systematic comparison of two novel,thiol-reactive prosthetic groups for <Superscript>18</Superscript>F labeling of peptides and proteins with the acylation agent succinimidyl-4-[<Superscript>18</Superscript>F]fluorobenzoate ([<Superscript>18</Superscript>F]SFB)

A systematic comparison of 4-[¹⁸F]fluorobenzaldehyde-O-(2-{2-[2-(pyrrol-2,5-dione-1-yl)ethoxy]-ethoxy}-ethyl)oxime ([¹⁸F]FBOM) and 4-[¹⁸F]fluorobenzaldehyde-O-[6-(2,5-dioxo-2,5-dihydro-pyrrol-1-yl)-hexyl]oxime ([¹⁸F]FBAM) as prosthetic groups for the mild and efficient ¹⁸F labeling of cysteine-containing peptides and proteins with the amine-group reactive acylation agent, succinimidyl-4-[¹⁸F]fluorobenzoate ([¹⁸F]SFB), is described. All three prosthetic groups were prepared in a remotely controlled synthesis module. Synthesis of [¹⁸F]FBOM and [¹⁸F]FBAM was accomplished via oxime formation through reaction of appropriate aminooxy-functionalized labeling precursors with 4-[¹⁸F]fluorobenzaldehyde. The obtained radiochemical yields were 19% ([¹⁸F]FBOM) and 29% ([¹⁸F]FBAM), respectively. Radiolabeling involving [¹⁸F]FBAM and [¹⁸F]FBOM was exemplified by the reaction with cysteine-containing tripeptide glutathione (GSH), a cysteine-containing dimeric neurotensin derivative, and human native low-density lipoprotein (nLDL) as model compounds. Radiolabeling with the acylation agent [¹⁸F]SFB was carried out using a dimeric neurotensin derivative and nLDL. Both thiol-group reactive prosthetic groups show significantly better labeling efficiencies for the peptides in comparison with the acylation agent [¹⁸F]SFB. The obtained results demonstrate that [¹⁸F]FBOM is especially suited for the labeling of hydrophilic cysteine-containing peptides, whereas [¹⁸F]FBAM shows superior labeling performance for higher molecular weight compounds as exemplified for nLDL apolipoprotein constituents. However, the acylation agent [¹⁸F]SFB is the preferred prosthetic group for labeling nLDL under physiological conditions.     

Synthesis and application of [18F]FDG-maleimidehexyloxime ([18F]FDG-MHO): a [18F]FDG-based prosthetic group for the chemoselective 18F-labeling of peptides and proteins

2-[(18)F]Fluoro-2-deoxy-D-glucose ([(18)F]FDG) as the most important PET radiotracer is available in almost every PET center. However, there are only very few examples using [(18)F]FDG as a building block for the synthesis of (18)F-labeled compounds. The present study describes the use of [(18)F]FDG as a building block for the synthesis of (18)F-labeled peptides and proteins. [(18)F]FDG was converted into [(18)F]FDG-maleimidehexyloxime ([(18)F]FDG-MHO), a novel [(18)F]FDG-based prosthetic group for the mild and thiol group-specific (18)F labeling of peptides and proteins. The reaction was performed at 100 degrees C for 15 min in a sealed vial containing [(18)F]FDG and N-(6-aminoxy-hexyl)maleimide in 80% ethanol. [(18)F]FDG-MHO was obtained in 45-69% radiochemical yield (based upon [(18)F]FDG) after HPLC purification in a total synthesis time of 45 min. Chemoselecetive conjugation of [(18)F]FDG-MHO to thiol groups was investigated by the reaction with the tripeptide glutathione (GSH) and the single cysteine containing protein annexin A5 (anxA5). Radiolabeled annexin A5 ([(18)F]FDG-MHO-anxA5) was obtained in 43-58% radiochemical yield (based upon [(18)F]FDG-MHO, n = 6), and [(18)F]FDG-MHO-anxA5 was used for a pilot small animal PET study to assess in vivo biodistribution and kinetics in a HT-29 murine xenograft model.     

Metabolic stability of 6,7-dialkoxy-4-(2-, 3- and 4-[18F]fluoroanilino)quinazolines, potential EGFR imaging probes

Epidermal growth factor receptors (EGFR), upregulated in many tumor types, have been a target for therapeutic development and molecular imaging. The objective of this study was to evaluate the distribution and metabolic characteristics of fluorine-18 labeled anilinoquinazolines as potential imaging agents for EGFR tyrosine kinase expression. Fluorine-18 labeled fluoronitrobenzenes were prepared by reaction of potassium cryptand [(18)F]fluoride with 1,2- and 1,4-dinitrobenzenes, and 3-nitro-N,N,N-trimethylanilinium triflate in 5min. Decay-corrected radiochemical yields of [(18)F]fluoride incorporation into the nitro-aromatic compounds were 81±2%, 44±4% and 77±5% (n=3-5) for the 2-, 3- and 4-fluoro isomers, respectively. Sodium borohydride reduction to the corresponding [(18)F]fluoroanilines was achieved with greater than 80% conversion in 5min. Coupling of [(18)F]fluoroaniline-hydrochlorides to 6,7-dimethoxy-4-chloro-quinazoline gave the corresponding 6,7-dimethoxy-4-(2-, 3- and 4-[(18)F]fluoroanilino)quinazolines in 31±5%, 17±2% and 55±2% radiochemical yield, respectively, while coupling to the 6,7-diethoxy-4-chloro-quinazoline produced 6,7-diethoxy-4-(2-, 3- and 4-[(18)F]fluoroanilino)quinazolines in 19±6%, 9±3% and 36±6% radiochemical yield, respectively, in 90min to end of synthesis from [(18)F]fluoride. Biodistribution of 2- and 4-[(18)F]fluoroanilinoquinazolines was conducted in tumor-bearing mice (MDA-MB-435 and MDA-MB-468 xenografts). Low tumor uptake (<1% injected dose per gram (ID/g) of tissue up to 3h postinjection of the radiotracers) was observed. High bone uptake (5-15% ID/g) was noted with the 4-[(18)F]fluoroanilinoquinazolines. The metabolic stabilities of radiolabeled quinazolines were further evaluated by incubation with human female cryopreserved isolated hepatocytes. Rapid degeneration of the 4-fluoro-substituted compounds to baseline polar metabolites was observed by radio-TLC, whereas, the 2- and 3-[(18)F]fluoroaniline derivatives were significantly more stable, up to 2h, corroborating the in vivo biodistribution studies. para-Substituted [(18)F]fluoroanilines, a common structural motif in radiopharmaceuticals, are highly susceptible to metabolic degradation.     

Design and synthesis of a new [18F]fluoropyridine-based haloacetamide reagent for the labeling of oligonucleotides: 2-bromo-N-[3-(2-[18F]fluoropyridin-3-yloxy)propyl]acetamide

Based on the recently highlighted potential of nucleophilic heteroaromatic ortho-radiofluorinations in the preparation of fluorine-18-labeled radiotracers and radiopharmaceuticals for PET, a [(18)F]fluoropyridine-based bromoacetamide reagent has been prepared and used in prosthetic group introduction for the labeling of oligonucleotides. [(18)F]FPyBrA (2-bromo-N-[3-(2-[(18)F]fluoropyridin-3-yloxy)propyl]acetamide) was designed as a radiochemically feasible reagent, its pyridinyl moiety both carrying the radioactive halogen (fluorine-18) and allowing its efficient incorporation via a nucleophilic heteroaromatic substitution, and its 2-bromoacetamide function, ensuring the efficient alkylation of a phosphorothioate monoester group born at the 3'- or 5'-end of single-stranded oligonucleotides. [(18)F]FPyBrA (HPLC-purified) was efficiently prepared in 18-20% non-decay-corrected yield (based on starting [(18)F]fluoride) using a three-step radiochemical pathway in 80-85 min. The developed procedure involves (1) a high-yield nucleophilic heteroaromatic ortho-radiofluorination as the fluorine-18 incorporation-step (70-85% radiochemical yield) and uses [3-(3-tert-butoxycarbonylaminopropoxy)pyridin-2-yl]trimethylammonium trifluoromethanesulfonate as precursor for labeling, followed by (2) rapid and quantitative TFA-removal of the N-Boc-protective group and (3) condensation with 2-bromoacetyl bromide (45-65% radiochemical yield). Typically, 3.3-3.7 GBq (90-100 mCi) of HPLC-purified [(18)F]FPyBrA could be obtained in 80-85 min, starting from 18.5 GBq (500 mCi) of a cyclotron production batch of [(18)F]fluoride. [(18)F]FPyBrA was regioselectively conjugated with 9-mer and 18-mer single-stranded oligonucleotides, provided with a phosphorothioate monoester group at their 3'-end. Both natural phosphodiester DNAs and in vivo-stable 2'-methoxy and -fluoro-modified RNAs were used. Conjugation uses optimized, short-time reaction conditions (MeOH/0.1 M PBS pH 7.4, 15 min, 120 degrees C), both compatible with the chemical stability of the oligonucleotides (ONs) and the half-life of fluorine-18. Conjugated [(18)F]ONs were finally purified by RP-HPLC and desalted using a Sephadex NAP-10 column. The whole radiosynthetic procedure, including the preparation of the fluorine-18-labeled reagent, the conjugation with the oligonucleotide, and the HPLC purification and formulation lasted 140-160 min. [(18)F]FPyBrA represents a valuable alternative to the already reported N-(4-[(18)F]fluorobenzyl)-2-bromoacetamide for the design and development of oligonucleotide-based radiopharmaceuticals for PET.     

Site-specific labeling of annexin V with F-18 for apoptosis imaging

Annexin V is useful in detecting apoptotic cells by binding to phosphatidylserine (PS) that is exposed on the outer surface of the cell membrane during apoptosis. In this study, we examined the labeling of annexin V-128, a mutated form of annexin V that has a single cysteine residue at the NH 2 terminus, with the thiol-selective reagent (18)F-labeling agent N-[4-[(4-[(18)F]fluorobenzylidene)aminooxy]butyl]maleimide ([(18)F]FBABM). We also examined the cell binding affinity of the (18)F-labeled annexin V-128 ([(18)F]FAN-128). [(18)F]FBABM was synthesized in two-step, one-pot method modified from literature procedure. (Toyokuni et al., Bioconjugate Chem. 2003, 14, 1253-1259). The average yield of [(18)F]FBABM was 23 +/- 4% (n = 4, decay-corrected) and the specific activity was approximately 6000 Ci/mmol. The total synthesis time was approximately 92 min. The critical improvement of this study was identifying and then developing a purification method to remove an impurity N-[4-[(4-dimethylaminobenzylidene)aminooxy]butyl]maleimide 4, whose presence dramatically decreased the yield of protein labeling. Conjugation of [(18)F]FBABM with the thiol-containing annexin V-128 gave [(18)F]FAN-128 in 37 +/- 9% yield (n = 4, decay corrected). Erythrocyte binding assay of [(18)F]FAN-128 showed that this modification of annexin V-128 did not compromise its membrane binding affinity. Thus, an in vivo investigation of [ (18)F]FAN-128 as an apoptosis imaging agent is warranted.     

Formation of fluorine-18 labeled diaryl ureas--labeled VEGFR-2/PDGFR dual inhibitors as molecular imaging agents for angiogenesis

Urea subunits are common components of various pharmaceuticals' core structure. Since in most cases the design and development of PET biomarkers is based on approved or potential drugs, there is a growing need for a general labeling methodology of urea-containing pharmacophores. As a part of research in the field of molecular imaging of angiogenic processes, we synthesized several highly potent VEGFR-2/PDGFR dual inhibitors as potential PET biomarkers. The structure of these inhibitors is based on the N-phenyl-N'-{4-(4-quinolyloxy)phenyl}urea skeleton. A representative inhibitor was successfully labeled with fluorine-18 by a three-step process. Initially, a two-step radiosynthesis of 4-[(18)F]fluoro-aniline from 1,4-dinitrobenzene (60min, EOB decay corrected yield: 63%) was performed. At the third and final step, the 4-[(18)F]fluoro-aniline synthon reacted for 30min at room temperature with 4-(2-fluoro-4-isocyanato-phenoxy)-6,7-dimethoxy-quinoline to give complete conversion of the labeled synthon to 1-[4-(6,7-dimethoxy-quinolin-4-yloxy)-3-fluoro-phenyl]-3-(4-[(18)F]fluoro-phenyl)-urea. The desired labeled product was obtained after total radiosynthesis time of 3h including HPLC purification with 46+/-1% EOB decay corrected radiochemical yield, 99% radiochemical purity, 99% chemical purity, and a specific activity of 400+/-37GBq/mmol (n=5).     

1-[3-(2-[18F]fluoropyridin-3-yloxy)propyl]pyrrole-2,5-dione: design, synthesis, and radiosynthesis of a new [18F]fluoropyridine-based maleimide reagent for the labeling of peptides and proteins

FPyME (1-[3-(2-fluoropyridin-3-yloxy)propyl]pyrrole-2,5-dione) was designed as a [(18)F]fluoropyridine-based maleimide reagent for the prosthetic labeling of peptides and proteins via selective conjugation with a thiol (sulfhydryl) function. Its pyridinyl moiety carries the radioactive halogen (fluorine-18) which can be efficiently incorporated via a nucleophilic heteroaromatic substitution, and its maleimido function ensures the efficient alkylation of a free thiol function as borne by cysteine residues. [(18)F]FPyME (HPLC-purified) was prepared in 17-20% non-decay-corrected yield, based on starting [(18)F]fluoride, in 110 min using a three-step radiochemical pathway. The developed procedure involves (1) a high-yield nucleophilic heteroaromatic ortho-radiofluorination on [3-(3-tert-butoxycarbonylaminopropoxy)pyridin-2-yl]trimethylammonium trifluoromethanesulfonate as the fluorine-18 incorporation step, followed by (2) rapid and quantitative TFA-induced removal of the N-Boc-protective group and (3) optimized maleimide formation using N-methoxycarbonylmaleimide. Typically, 4.8-6.7 GBq (130-180 mCi) of radiochemically pure [(18)F]FPyME ([(18)F]-1) could be obtained after semipreparative HPLC in 110 min starting from a cyclotron production batch of 33.3 GBq (900 mCi) of [(18)F]fluoride (overall radiochemical yields, based on starting [(18)F]fluoride: 28-37% decay-corrected). [(18)F]FPyME ([(18)F]-1) was first conjugated with a small model hexapeptide ((N-Ac)KAAAAC), confirming the excellent chemoselectivity of the coupling reaction (CH(2)SH versus CH(2)NH(2)) and then conjugated with two 8-kDa proteins of interest, currently being developed as tumor imaging agents (c-AFIM-0 and c-STxB). Conjugation was achieved in high yields (60-70%, isolated and non-decay-corrected) and used optimized, short-time reaction conditions (a 1/9 (v/v) mixture of DMSO and 0.05 M aq Tris NaCl buffer (pH 7.4) or 0.1 M aq PBS (pH 8), at room temperature for 10 min) and purification conditions (a gel filtration using a Sephadex NAP-10 cartridge or a SuperDex Peptide HR 10/30 column), both compatible with the chemical stability of the proteins and the relatively short half-life of the radioisotope concerned. The whole radiosynthetic procedure, including the preparation of the fluorine-18-labeled reagent, the conjugation with the protein and the final purification took 130-140 min. [(18)F]FPyME ([(18)F]-1) represents a new, valuable, thiol-selective, fluorine-18-labeled reagent for the prosthetic labeling with fluorine-18 of peptides and proteins. Because of its excellent chemoselectivity, [(18)F]FPyME offers an interesting alternative to the use of the nonselective carboxylate and amine-reactive [(18)F]reagents and can therefore advantageously be used for the design and development of new peptide- and protein-based radiopharmaceuticals for PET.     

General method for labeling siRNA by click chemistry with fluorine-18 for the purpose of PET imaging

The alkyne-azide Cu(I)-catalyzed Huisgen cycloaddition, a click-type reaction, was used to label a double-stranded oligonucleotide (siRNA) with fluorine-18. An alkyne solid support CPG for the preparation of monostranded oligonucleotides functionalized with alkyne has been developed. Two complementary azide labeling agents (1-(azidomethyl)-4-[(18)F]fluorobenzene) and 1-azido-4-(3-[(18)F]fluoropropoxy)benzene have been produced with 41% and 35% radiochemical yields (decay-corrected), respectively. After annealing with the complementary strand, the siRNA was directly labeled by click chemistry with [(18)F]fluoroazide to produce the [(18)F]-radiolabeled siRNA with excellent radiochemical yield and purity.     

Total synthesis and evaluation of [18F]MHMZ

Radiochemical labeling of MDL 105725 using the secondary labeling precursor 2-[(18)F]fluoroethyltosylate ([(18)F]FETos) was carried out in yields of approximately 90% synthesizing [(18)F]MHMZ in a specific activity of approximately 50MBq/nmol with a starting activity of approximately 3GBq. Overall radiochemical yield including [(18)F]FETos synthon synthesis, [(18)F]fluoroalkylation and preparing the injectable [(18)F]MHMZ solution was 42% within a synthesis time of approximately 100 min. The novel compound showed excellent specific binding to the 5-HT(2A) receptor (K(i)=9.0 nM) in vitro and promising in vivo characteristics.     

Oxalic acid supported Si-18F-radiofluorination: one-step radiosynthesis of N-succinimidyl 3-(di-tert-butyl[18F]fluorosilyl)benzoate ([18F]SiFB) for protein labeling

N-Succinimidyl 3-(di-tert-butyl[(18)F]fluorosilyl)benzoate ([(18)F]SiFB), a novel synthon for one-step labeling of proteins, was synthesized via a simple (18)F-(19)F isotopic exchange. A new labeling technique that circumvents the cleavage of the highly reactive active ester moiety under regular basic (18)F-labeling conditions was established. In order to synthesize high radioactivity amounts of [(18)F]SiFB, it was crucial to partially neutralize the potassium oxalate/hydroxide that was used to elute (18)F(-) from the QMA cartridge with oxalic acid to prevent decomposition of the active ester moiety. Purification of [(18)F]SiFB was performed by simple solid-phase extraction, which avoided time-consuming HPLC and yielded high specific activities of at least 525 Ci/mmol and radiochemical yields of 40-56%. In addition to conventional azeotropic drying of (18)F(-) in the presence of [K(+)?2.2.2.]C(2)O(4), a strong anion-exchange (SAX) cartridge was used to prepare anhydrous (18)F(-) for nucleophilic radio-fluorination omitting the vacuum assisted drying of (18)F(-). Using a lyophilized mixture of [K(+)?2.2.2.]OH resolubilized in acetonitrile, the (18)F(-) was eluted from the SAX cartridge and used directly for the [(18)F]SiFB synthesis. [(18)F]SiFB was applied to the labeling of various proteins in likeness to the most commonly used labeling synthon in protein labeling, N-succinimidyl-4-[(18)F]fluorobenzoate ([(18)F]SFB). Rat serum albumin (RSA), apo-transferrin, a β-cell-specific single chain antibody, and erythropoietin were successfully labeled with [(18)F]SiFB in good radiochemical yields between 19% and 36%. [(18)F]SiFB- and [(18)F]SFB-derivatized RSA were directly compared as blood pool imaging agents in healthy rats using small animal positron emission tomography. Both compounds demonstrated identical biodistributions in healthy rats, accurately visualizing the blood pool with PET.     

Synthesis and radiopharmacological characterization of 2beta-carbo-2'-[18F]fluoroethoxy-3beta-(4-bromo-phenyl)tropane ([18F]MCL-322) as a PET radiotracer for imaging the dopamine transporter (DAT)

The fluoroalkyl-containing tropane derivative 2beta-carbo-2'-fluoroethoxy-3beta-(4-bromo-phenyl)tropane (MCL-322) is a highly potent and moderately selective ligand for the dopamine transporter (DAT). The compound was labeled with the short-lived positron emitter (18)F in a single step by nucleophilic displacement of the corresponding tosylate precursor MCL-323 with no-carrier-added [(18)F]fluoride. The positron emission tomography (PET) radiotracer 2beta-carbo-2'-[(18)F]fluoroethoxy-3beta-(4-bromo-phenyl)tropane [(18)F]MCL-322 was obtained in decay-corrected radiochemical yields of 30-40% at a specific radioactivity of 1.6-2.4Ci/mumol (60-90GBq/mumol) at the end-of-synthesis (EOS). Small animal PET, ex vivo and in vivo biodistribution experiments in rats demonstrated a high uptake in the striatum (3.2% ID/g) 5min after injection, which increased to 4.2% ID/g after 60min. The uptake in the cerebellum was 1.8% ID/g and 0.6% ID/g after 5min and 60min post-injection, respectively. Specific binding to DAT of [(18)F]MCL-322 was confirmed by blocking experiments using the high affinity DAT ligand GBR 12909. The radiopharmacological characterization was completed with metabolite and autoradiographic studies confirming the selective uptake of [(18)F]MCL-322 in the striatum. It is concluded that the simple single-step radiosynthesis of [(18)F]MCL-322 and the promising radiopharmacological data make [(18)F]MCL-322 an attractive candidate for the further development of a PET radiotracer potentially suitable for clinical DAT imaging in the human brain.     

A novel 18F-labeled pyridyl benzofuran derivative for imaging of β-amyloid plaques in Alzheimer’s brains

A potential probe for PET targeting β-amyloid plaques in Alzheimer’s disease (AD) brain, FPYBF-1 (5-(5-(2-(2-(2-fluoroethoxy)ethoxy)ethoxy)benzofuran-2-yl)-N,N-dimethylpyridin-2-amine), was synthesized and evaluated. In experiments in vitro, FPYBF-1 displayed high affinity for Aβ(1–42) aggregates (K_i = 0.9 nM), and substantial labeling of β-amyloid plaques in sections of postmortem AD brains but not control brains. In experiments in vivo, [¹⁸F]FPYBF-1 displayed good initial uptake (5.16%ID/g at 2 min postinjection) and rapid washout from the brain (2.44%ID/g at 60 min postinjection) in normal mice, and excellent binding to β-amyloid plaques in a murine model of AD. Furthermore, the specific labeling of plaques labeling was observed in autoradiographs of autopsied AD brain sections. [¹⁸F]FPYBF-1 may be a useful probe for imaging β-amyloid plaques in living brain tissue.     

Synthesis of a new heterobifunctional linker, N-[4-(aminooxy)butyl]maleimide, for facile access to a thiol-reactive 18F-labeling agent

A new heterobifunctional linker containing an aldehyde-reactive aminooxy group and a thiol-reactive maleimide group, namely N-[4-(aminooxy)butyl]maleimide, was synthesized as a stable HCl salt by O-alkylation of either N-hydroxyphthalimide or N-(4-monomethoxytrityl)hydroxylamine, followed by N-alkylation of maleimide, in an overall yield of 18% (seven steps) or 29% (five steps), respectively. This heterobifunctional linker allowed a simple and efficient synthesis of a maleimide-containing thiol-reactive (18)F-labeling agent. Thus, N-[4-[(4-[(18)F]fluorobenzylidene)aminooxy]butyl]maleimide (specific activity: approximately 3000 Ci/mmol at end of synthesis) was synthesized in two steps involving the preparation of 4-[(18)F]fluorobenzaldehyde, followed by its aminooxy-aldehyde coupling reaction to the heterobifunctional linker, with an overall radiochemical yield of approximately 35% (decay corrected) within approximately 60 min from end of bombardment. Initial (18)F-labeling experiments were carried out using a thiol-containing tripeptide glutathione (GSH) and a 5'-thiol-functionalized oligodeoxynucleotide (5'-S-ODN) in phosphate-buffered saline (PBS, pH 7.5). After standing at room temperature for 10 min, the (18)F-labeled GSH and 5'-S-ODN were obtained in (18)F-labeling yields of approximately 70% and approximately 5% (decay-corrected), respectively. The heterobifunctional linker is easy to synthesize and provides a facile access to the maleimide-containing thiol-reactive (18)F-labeling agent, which could be advantageously employed in the development of (18)F-labeled biomomolecules for use with positron emission tomography.     

Efficient (18)F-Labeling of Large 37-Amino-Acid pHLIP Peptide Analogues and Their Biological Evaluation

Solid tumors often develop an acidic microenvironment, which plays a critical role in tumor progression and is associated with increased level of invasion and metastasis. The 37-residue pH (low) insertion peptide (pHLIP) is under study as an imaging platform because of its unique ability to insert into cell membranes at a low extracellular pH (pH(e) < 7). Labeling of peptides with [(18)F]-fluorine is usually performed via prosthetic groups using chemoselective coupling reactions. One of the most successful procedures involves the alkyne-azide copper(I) catalyzed cycloaddition (CuAAC). However, none of the known "click" methods have been applied to peptides as large as pHLIP. We designed a novel prosthetic group and extended the use of the CuAAC "click chemistry" for the simple and efficient (18)F-labeling of large peptides. For the evaluation of this labeling approach, a d-amino acid analogue of WT-pHLIP and an l-amino acid control peptide K-pHLIP, both functionalized at the N-terminus with 6-azidohexanoic acid, were used. The novel 6-[(18)F]fluoro-2-ethynylpyridine prosthetic group, was obtained via nucleophilic substitution on the corresponding bromo-precursor after 10 min at 130 °C with a radiochemical yield of 27.5 ± 6.6% (decay corrected) with high radiochemical purity ≥98%. The subsequent Cu(I)-catalyzed "click" reaction with the azido functionalized pHLIP peptides was quantitative within 5 min at 70 °C in a mixture of water and ethanol using Cu-acetate and sodium l-ascorbate. [(18)F]-d-WT-pHLIP and [(18)F]-l-K-pHLIP were obtained with total radiochemical yields of 5-20% after HPLC purification. The total reaction time was 85 min including formulation. In vitro stability tests revealed high stability of the [(18)F]-d-WT-pHLIP in human and mouse plasma after 120 min, with the parent tracer remaining intact at 65% and 85%, respectively. PET imaging and biodistribution studies in LNCaP and PC-3 xenografted mice with the [(18)F]-d-WT-pHLIP and the negative control [(18)F]-l-K-pHLIP revealed pH-dependent tumor retention. This reliable and efficient protocol promises to be useful for the (18)F-labeling of large peptides such as pHLIP and will accelerate the evaluation of numerous [(18)F]-pHLIP analogues as potential PET tracers.     

Radiosynthesis and in vivo evaluation of 1-[18F]fluoroelacridar as a positron emission tomography tracer for P-glycoprotein and breast cancer resistance protein

Aim of this study was to label the potent dual P-glycoprotein (Pgp) and breast cancer resistance protein (BCRP) inhibitor elacridar (1) with (18)F to provide a positron emission tomography (PET) radiotracer to visualize Pgp and BCRP. A series of new 1- and 2-halogen- and nitro-substituted derivatives of 1 (4a-e) was synthesized as precursor molecules and reference compounds for radiolabelling and shown to display comparable in vitro potency to 1 in increasing rhodamine 123 accumulation in a cell line overexpressing human Pgp (MDCKII-MDR1). 1-[(18)F]fluoroelacridar ([(18)F]4b) was synthesized in a decay-corrected radiochemical yield of 1.7±0.9% by a 1-step no-carrier added nucleophilic aromatic (18)F-substitution of 1-nitro precursor 4c. Small-animal PET imaging of [(18)F]4b was performed in na?ve rats, before and after administration of unlabelled 1 (5 mg/kg, n=3), as well as in wild-type and Mdr1a/b((-/-))Bcrp1((-/-)) mice (n=3). In PET experiments in rats, administration of unlabelled 1 increased brain activity uptake by a factor of 9.5 (p=0.0002, 2-tailed Student's t-test), whereas blood activity levels remained unchanged. In Mdr1a/b((-/-))Bcrp1((-/-)) mice, the mean brain-to-blood ratio of activity at 60 min after tracer injection was 7.6 times higher as compared to wild-type animals (p=0.0002). HPLC analysis of rat brain tissue extracts collected at 40 min after injection of [(18)F]4b revealed that 93±7% of total radioactivity in brain was in the form of unchanged [(18)F]4b. In conclusion, the in vivo behavior of [(18)F]4b was found to be similar to previously described [(11)C]1 suggesting transport of [(18)F]4b by Pgp and/or BCRP at the rodent BBB. However, low radiochemical yields and a significant degree of in vivo defluorination will limit the utility of [(18)F]4b as a PET tracer.