Testing attachment point theory: diatom attachment on microtextured polyimide biomimics

Abstract

This paper explores diatom attachment to a range of laser etched polyimide surfaces to directly test ‘attachment point theory’. Static bioassays were conducted on microtextured polyimide surfaces using four diatom species, Fallacia carpentariae, Nitzschia cf. paleacea, Amphora sp. and Navicula jeffreyi with cell sizes ranging from 1 – 14 μm. The microtextured polyimides were modelled from natural fouling resistant bivalve surfaces and had wavelengths above, below and at the same scale as the diatom cell sizes. Diatoms attached in significantly higher numbers to treatments where the numbers of attachment points was highest. The lowest diatom attachment occurred where cells were slightly larger than the microtexture wavelength, resulting in only two theoretical points of attachment. The results support attachment point theory and highlight the need to address larval/cell size in relation to the number of attachment points on a surface. Further studies examining a range of microtexture scales are needed to apply attachment point theory to a suite of fouling organisms and to develop structured surfaces to control the attachment and development of fouling communities.     

Attachment point theory revisited: the fouling response to a microtextured matrix

This paper examines attachment point theory in detail by testing the fouling attachment of several fouling groups to a microtextured matrix. Static bioassays were conducted on polycarbonate plates with nine equal regions, comprising eight scales of microtexture (4-512 microm) and one untextured region. The microtextures examined were continuous sinusoidal ridges and troughs of defined height and width. Attachment over the microtextured plates was examined for the diatom Amphora sp., the green alga Ulva rigida, the red alga Centroceras clavulatum, the serpulid tube worm Hydroides elegans and the bryozoan Bugula neritina. It was found that the size of the microtexture in relation to the size of the settling propagules/larvae was important in the selection of attachment sites. Attachment was generally lower when the microtexture wavelength was slightly smaller than the width of the settling propagules/larvae and increased when the wavelength was wider than their width. The effect of attachment points was weak for small motile microfoulers (Amphora sp. and U. rigida) (7 microm), strong for large macrofouling larvae (H. elegans and B. neritina) (129-321 microm) and non-existent for the non-motile algal spores (C. clavulatum) (37 microm). This study reinforces the potential of using attachment points to develop surfaces with increased fouling resistance or, alternatively, surfaces which promote the attachment of selected target sizes of motile propagules or larvae.     

Microfluidic accumulation assay probes attachment of biofilm forming diatom cells

Testing of fouling release (FR) technologies is of great relevance for discovery of the next generation of protective marine coatings. In this paper, an accumulation assay to test diatom interaction under laminar flow with the model organism Navicula perminuta is introduced. Using time lapse microscopy with large area sampling allows determination of the accumulation kinetics of the diatom on three model surfaces with different surface properties at different wall shear stresses. The hydrodynamic conditions within the flow cell are described and a suitable shear stress range to perform accumulation experiments is identified at which statistically significant discrimination of surfaces is possible. The observed trends compare well to published adhesion preferences of N. perminuta. Also, previously determined trends of critical wall shear stresses required for cell removal from the same set of functionalized interfaces shows consistent trends. Initial attachment mediated by extracellular polymeric substances (EPS) present outside the diatoms leads to the conclusion that the FR potential of the tested coating candidates can be deducted from dynamic accumulation experiments under well-defined hydrodynamic conditions. As well as testing new coating candidates for their FR properties, monitoring of the adhesion process under flow provides additional information on the mechanism and geometry of attachment and the population kinetics.     

Topographic cues guide the attachment of diatom cells and algal zoospores

Surface topography plays a key role in the colonization of substrata by the colonizing stages of marine fouling organisms. For the innovation of marine antifouling coatings, it is essential to understand how topographic cues affect the settlement of these organisms. In this study, tapered, spiked microstructures and discrete honeycombs of varying feature dimensions were designed and fabricated in order to examine the influence of topography on the attachment of zoospores of the green macroalga Ulva linza and cells of the diatom (microalga) Navicula incerta. Contrasting results were obtained with these two species of algae. Indeed, the preferred location of cells of N. incerta was dominated by attachment point theory, which suggested a positive correlation between the density of cells adhering and the amount of available attachment points, while the settlement of spores of U. linza was mainly regulated by both Wenzel roughness and local binding geometry.     

Enhancing the settlement and attachment strength of pediveligers of Mytilus galloprovincialis by changing surface wettability and microtopography

Surface wettability and microtopography can either enhance or deter larval settlement of many sessile marine organisms. This study quantifies the effect of these surface properties on the settlement of pediveligers of Mytilus galloprovincialis, using polymers spanning a range of wettability and microtextured polydimethylsiloxane (PDMS). Furthermore, the adhesion strength of settled pediveligers on microtextured PDMS surfaces was quantified using a flow chamber. Settlement was enhanced at the hydrophilic end of the wettability spectrum, where mean settlement on nylon reached 33.5 ± 13.1%. In contrast, mean settlement on the most hydrophobic polymer (PDMS) was 4.2 ± 3.2%. Microtopography had a much stronger effect compared to wettability, where 400 μm textured PDMS enhanced settlement above 90%. Settlement preferences were also positively correlated to adhesion strength at flow rates of 4 knots, with all initially settled pediveligers on smooth PDMS detaching, while 79.9 ± 5.7% of pediveligers remained on the 400 μm texture.     

Algal antifouling and fouling-release properties of metal surfaces coated with a polymer inspired by marine mussels

The marine antifouling and fouling-release performance of titanium surfaces coated with a bio-inspired polymer was investigated. The polymer consisted of methoxy-terminated poly(ethylene glycol) (mPEG) conjugated to the adhesive amino acid l-3,4-dihydroxyphenylalanine (DOPA) and was chosen based on its successful resistance to protein and mammalian cell fouling. Biofouling assays for the settlement and release of the diatom Navicula perminuta and settlement, growth and release of zoospores and sporelings (young plants) of the green alga Ulva linza were carried out. Results were compared to glass, a poly(dimethylsiloxane) elastomer (Silastic T2) and uncoated Ti. The mPEG-DOPA3 modified Ti surfaces exhibited a substantial decrease in attachment of both cells of N. perminuta and zoospores of U. linza as well as the highest detachment of attached cells under flow compared to control surfaces. The superior performance of this polymer over a standard silicone fouling-release coating in diatom assays and approximately equivalent performance in zoospore assays suggests that this bio-inspired polymer may be effective in marine antifouling and fouling-release applications.     

Effects of biofilms on zebra mussel postveliger attachment to artificial surfaces

Abstract. The zebra mussel is an introduced fouling organism in North American inland waters. This field study tested whether natural biofilms, formed by covering substrata with a 100-μm mesh that allows microorganisms to attach and films to develop in the absence of postveligers, influenced the attachment of zebra mussel postveligers to artificial surfaces. Low-wettable polycarbonate and wettable glass surfaces were used in the experiments over four field seasons to study biofilm formation (1997–1998) and mussel attachment (1998–2000). The presence of the mesh did not quantitatively affect biofilm development on either substratum as determined by microscopic direct counts and colony-forming units on R2A agar. Natural biofilms on polycarbonate surfaces positively influenced postveliger attachment compared to substrata that initially had no film (ANOVA, p-values ranged from ≤.05 to ≤.001). Biofilms did not influence postveliger attachment to glass surfaces (ANOVA, p>.05). Attachment to both substrata was similar on surfaces with and without previously settled postveligers. Based on these results, we conclude that biofilms can enhance postveliger attachment to some but not all artificial surfaces.     

The influence of cell surface properties of thermophilic streptococci on attachment to stainlesssteel

The quality of milk products is threatened by the formation of biofilms of thermophilicstreptococci on the internal surfaces of plate heat exchangers used in milk processing. Althoughattachment to stainless steel surfaces is one of the first stages in the development of a biofilm, themechanisms involved in attachment have not been reported. The cell surface properties of 12strains of thermophilic streptococci were examined to determine their importance in attachment tostainless steel surfaces. Hydrophobicity, extracellular polysaccharide production and cell surfacecharge varied between the different strains but could not be related to numbers attaching. Treatingthe cells with sodium metaperiodate, lysozyme or trichloroacetic acid to disrupt cell surfacepolysaccharide had no effect on attachment. Treatment with trypsin or sodium dodecyl sulphate toremove cell surface proteins resulted in a 100-fold reduction in the number of bacteria attaching.This result suggests that the surface proteins of the thermophilic streptococci are important intheir attachment to stainless steel.     

Enhancing the settlement and attachment strength of pediveligers of Mytilus galloprovincialis bychanging surface wettability and microtopography

Surface wettability and microtopography can either enhance or deter larval settlement of many sessile marine organisms. This study quantifies the effect of these surface properties on the settlement of pediveligers of Mytilus galloprovincialis, using polymers spanning a range of wettability and microtextured polydimethylsiloxane (PDMS). Furthermore, the adhesion strength of settled pediveligers on microtextured PDMS surfaces was quantified using a flow chamber. Settlement was enhanced at the hydrophilic end of the wettability spectrum, where mean settlement on nylon reached 33.5 ± 13.1%. In contrast, mean settlement on the most hydrophobic polymer (PDMS) was 4.2 ± 3.2%. Microtopography had a much stronger effect compared to wettability, where 400 μm textured PDMS enhanced settlement above 90%. Settlement preferences were also positively correlated to adhesion strength at flow rates of 4 knots, with all initially settled pediveligers on smooth PDMS detaching, while 79.9 ± 5.7% of pediveligers remained on the 400 μm texture.     

Influence of substratum hydration and adsorbed macromolecules on bacterial attachment to surfaces

The attachment of Pseudomonas fluorescens and an Acinetobacter sp. to hydrogel and polystyrene surfaces was investigated to evaluate the influence of adsorbed water and macromolecules on adhesion. With both organisms, there was a decrease in attachment numbers with increasing water content of the hydrogels. There was also a decrease in attachment with a decrease in water contact angle on untreated, tissue culture and sulfonated polystyrene surfaces; however, the attachment numbers were higher than would be expected on the basis of the hydrogel data. With P. fluorescens, attachment to untreated and tissue culture polystyrene was inhibited by bovine serum albumin, Escherichia coli lipopolysaccharide, and the supernatant from spent medium, both when the conditioning substances were added to the suspension of attaching cells and when they were preadsorbed onto the surfaces. Dextran inhibited attachment only when added to the bacterial suspension. Supernatants from centrifuged natural freshwater samples had no effect. Thus, hydration of a surface and the adsorption of macromolecules can reduce bacterial attachment; however, additional factors relating to the chemical composition of the substratum and polymeric stabilization of suspended cells can affect the adhesion interaction and resultant numbers of attached cells.     

Influence of substratum hydration and adsorbed macromolecules on bacterial attachment to surfaces.

The attachment of Pseudomonas fluorescens and an Acinetobacter sp. to hydrogel and polystyrene surfaces was investigated to evaluate the influence of adsorbed water and macromolecules on adhesion. With both organisms, there was a decrease in attachment numbers with increasing water content of the hydrogels. There was also a decrease in attachment with a decrease in water contact angle on untreated, tissue culture and sulfonated polystyrene surfaces; however, the attachment numbers were higher than would be expected on the basis of the hydrogel data. With P. fluorescens, attachment to untreated and tissue culture polystyrene was inhibited by bovine serum albumin, Escherichia coli lipopolysaccharide, and the supernatant from spent medium, both when the conditioning substances were added to the suspension of attaching cells and when they were preadsorbed onto the surfaces. Dextran inhibited attachment only when added to the bacterial suspension. Supernatants from centrifuged natural freshwater samples had no effect. Thus, hydration of a surface and the adsorption of macromolecules can reduce bacterial attachment; however, additional factors relating to the chemical composition of the substratum and polymeric stabilization of suspended cells can affect the adhesion interaction and resultant numbers of attached cells.     

海洋硅藻附着研究进展

随着人类对海洋资源的进一步开发和利用,越来越多的人工设备用于水下操作,而海洋生物污损在很大程度上制约了这些设备的应用,给人类带来重大的经济损失。因此,海洋生物污损的形成机制与防治成为当前研究的一个热点。海洋硅藻是海洋生物污损过程中形成生物膜的主要物种,其在水下固相表面的附着可诱导大型污损生物的附着,从而影响生物污损群落的形成。本文综述了硅藻在固相表面的附着机理、固相表面性质对硅藻附着的影响及具有应用前景的广谱抗污损高分子材料的研究进展,并展望海洋硅藻附着研究前景。     

Observations on the mechanisms of attachment of some marine fouling blue-green algae

Using scanning electron microscopy (SEM), differential interference contrast microscopy (DICM) and cytochemical staining techniques, preliminary observations have been made on the mechanisms of attachment of some common, marine, benthic fouling blue-green algae ("cyanobacteria") isolated into culture from various toxic and non-toxic surfaces in Langstone Harbour, south coast of England. Blue-green algae investigated included species of Calothrix, Dermocarpa, Plectonema, Phormidium and Xenococcus. The blue-green algae are rapid colonisers and can make an important contribution to the pioneering communities on both toxic and non-toxic surfaces. A characteristic feature of the colonization process is the production of variable quantities of extracellular polymeric substances (EPS) which appear to function as adhesives. Cytochemical staining revealed the EPS to be an acidic polysaccharide and, therefore, chemically similar to the EPS produced by sessile diatoms. It is suggested that the EPS additionally assists in cell motility, acts as an antidesiccant and may influence the fouling process by combining with antifouling paint toxins and modifying the surface energy of substrata.     

Development of the initial diatom microfouling layer on antifouling and fouling-release surfaces in temperate and tropical Australia

Diatoms are a major component of the slime layers that form on artificial surfaces in marine environments. In this article, the role played by diatoms during the pioneering stages of colonization of three marine antifouling (AF) coatings, viz Intersmooth 360®, Super Yacht 800® and a fouling-release (FR) coating Intersleek 700®, was investigated. The study was conducted over three distinct seasons in two very different marine environments in Australia, ie temperate Williamstown, Victoria and tropical Cairns, Queensland. Diatom fouling occurred more rapidly on the FR coating Intersleek 700, compared to both biocidal AF paints. However, colonization by diatoms on all three coatings was generally slow during the 16-day study. Benthic diatoms do not subsist by floating around in the water column, rather they only gain the opportunity to colonize new surfaces when they either voluntarily release or are displaced from their benthic habitat, thereafter entering the water column where the opportunity to adhere to a new surface presents itself. However, once settled, fouling diatoms grow exponentially from the site of attachment, spreading out until they populate large areas of the surface. This mode of surface colonization correlates more with an ‘infection’ type, epidemiology model, a mechanism that accounts for the colonization of significant regions of the coating surface from a single fouling diatom cell, forming ‘clonal patches’. This is in comparison to the bacterial colonization of the surface, which exhibits far more rapid recruitment and growth of cells on the substratum surface. Therefore, it is hypothesized that fouling diatoms may be characterized more by their ability to adhere and grow on surfaces already modified by bacterial biofilms, rather than on their strength of adhesion. Cell morphology and the ability to avoid shear may also be an important factor.     

Effects of artificial epibionts on byssogenesis,attachment strength,and movement in two size classes of the blue mussel,Mytilus edulis

Blue mussels (Mytilus edulis) can alter the strength of byssal attachment and move between and within mussel aggregations on wave‐swept shores, but this movement ability may be limited by epibiont fouling. We quantified the effects of artificial epibiont fouling on the production of byssal threads, attachment strength, and movement in two size classes of blue mussels. In a factorial experiment, large epibiont‐covered mussels produced more functional byssal threads (i.e., those continuous from animal to substrate) after 24 h than large unfouled and small fouled mussels, but not more than small unfouled mussels. Small unfouled mussels formed and released more byssus bundles compared to any other treatment group, which indicates increased movement. Conversely, epibiont fouling resulted in decreased numbers of byssus bundles shed, and therefore reduced movement in small mussels. Epibiont‐covered mussels started producing byssal threads sooner than unfouled mussels, while small mussels began producing byssal threads earlier compared to large mussels. Mean attachment strength from both size classes increased by 9.5% when mussels were artificially fouled, and large mussels had a 34% stronger attachment compared to small mussels. On the other hand, a 2.3% decrease in attachment strength was found with increasing byssus bundles shed. Our results suggest that fouling by artificial epibionts influences byssal thread production and attachment strength in large mussels, whereas epibionts on small mussels impact their ability to move. Mussels are able to respond rapidly to fouling, which carries implications for the dynamics of mussel beds in their intertidal and subtidal habitats, especially in relation to movement of mussels within and among aggregations.     

Fouling deterrence on the bivalve shell Mytilus galloprovincialis: a physical phenomenon?

The physical nature of fouling deterrence by the mussel Mytilus galloprovincialis was investigated using high-resolution biomimics of the bivalve surface. The homogeneous microtextured surface of M. galloprovincialis (1.94 +/- 0.03 microm), the smooth surface of the bivalve Amusium balloti (0 microm), and moulds of these surfaces (biomimics) were compared with controls of smooth (0 microm) and sanded moulds, (55.4 +/- 2.7 microm) and PVC strips (0 microm) in a 12-week field trial. The shell and mould of M. galloprovincialis were fouled by significantly fewer species and had significantly less total fouling cover than the shell and mould of A. balloti over a 12-week period. However, the major effects were between surfaces with and without microtopography. Surface microtopography, be it structured as in the case of M. galloprovincialis shell and mould, or random as in the case of the sanded mould, had a lower cover of fouling organisms than treatments without microtopography after 6 weeks. There was also no difference between the effect of the M. galloprovincialis mould and the sanded mould. The strong fouling deterrent effects of both these surfaces diminished rapidly after 6 to 8 weeks while that of M. galloprovincialis shell remained intact for the duration of the experiment suggesting factors in addition to surface microtopography contribute to fouling deterrence.     

Sediment challenge to promising ultra-low fouling hydrophilic surfaces in the marine environment

Hydrophilic coatings exhibit ultra-low fouling properties in numerous laboratory experiments. In stark contrast, the antifouling effect of such coatings in vitro failed when performing field tests in the marine environment. The fouling release performance of nonionic and zwitterionic hydrophilic polymers was substantially reduced compared to the controlled laboratory environment. Microscopy and spectroscopy revealed that a large proportion of the accumulated material in field tests contains inorganic compounds and diatomaceous soil. Diatoms adhered to the accumulated material on the coating, but not to the pristine polymer. Simulating field tests in the laboratory using sediment samples collected from the test sites showed that incorporated sand and diatomaceous earth impairs the fouling release characteristics of the coatings. When exposed to marine sediment from multiple locations, particulate matter accumulated on these coatings and served as attachment points for diatom adhesion and enhanced fouling. Future developments of hydrophilic coatings should consider accumulated sediment and its potential impact on the antifouling performance.     

Antifouling performance of cross-linked hydrogels: refinement of an attachment model

Poly(ethylene glycol) dimethacrylate (PEGDMA), PEGDMA-co-glycidyl methacrylate (PEGDMA-co-GMA), and PEGDMA-co-hydroxyethyl methacrylate (PEGDMA-co-HEMA) hydrogels were polymerized using ammonium persulfate and ascorbic acid as radical initiators. Surface energies of the hydrogels and a standard, poly(dimethylsiloxane) elastomer (PDMSe), were characterized using captive bubble and sessile drop measurements, respectively (γ = 52 mN/m, γ(0) = 19 mN/m). The chemical composition of the hydrogels was characterized by attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy. All three hydrogel compositions reduced significantly (p = 0.05) initial attachment of zoospores of the green alga Ulva linza (up to 97%), cells of the diatom Navicula incerta (up to 58%) and the bacterium Cobetia marina (up to 62%), compared to a smooth PDMSe standard. A shear stress (45 Pa), generated in a water channel, eliminated up to 95% of the initially attached cells of Navicula from the smooth hydrogel surfaces relative to smooth PDMSe surfaces. Compared to the PDMSe standard, 79% of the cells of C. marina were removed from all smooth hydrogel compositions when exposed to a 50 Pa wall shear stress. Attachment of spores of the green alga Ulva to microtopographies replicated in PEGDMA-co-HEMA was also evaluated. The Sharklet AF microtopography patterned, PEGDMA-co-HEMA surfaces reduced attachment of spores of Ulva by 97% compared to a smooth PDMSe standard. The attachment densities of spores to engineered microtopographies in PDMSe and PEGDMA-co-HEMA were shown to correlate with a modified attachment model through the inclusion of a surface energy term. Attachment densities of spores of Ulva to engineered topographies replicated in a material other than PDMSe are now correlated with the attachment model (R(2) = 0.80).     

Extracts of North Sea macroalgae reveal specific activity patterns against attachment and proliferation of benthic diatoms: a laboratory study

A variety of macroalgae (Ceramium rubrum, Corallina officinalis, Palmaria palmata, Mastocarpus stellatus, Fucus vesiculosus, Cladophora rupestris, Ulva sp.) were investigated by scanning electron microscopy to visualize epiphytic colonizers. The macroalgae differed in terms of their epiphytic coverage of bacteria, fungi and diatoms. Macroalgae, largely devoid of epiphytic diatoms, were hypothesized to employ effective antifouling means to reduce epiphytic coverage, whilst heavily fouled macroalgae were proposed to lack antifouling strategies. To test these hypotheses from an allelochemical perspective with regard to fouling diatoms, dichloromethane-methanol (1:1) crude extracts of macroalgae were concentrated in dimethylsulfoxide and investigated in diatom attachment and proliferation assays using four benthic diatoms (Nitzschia sp., Navicula phyllepta, Navicula arenaria and Amphora sp.). Algal extracts exhibited a distinct pattern of activity against the test diatoms, suggesting a targeted and selective effect of macroalgal metabolites on individual fouling diatoms. The main outcome of this study was that visual inspection and quantitative categorization of epiphytic colonizers on macroalgal thalli could not be used to predict reliably whether macroalgae employed a chemical defense mechanism.     

The attachment of Enteromorpha zoospores to a bacterial biofilm assemblage

This study has investigated the relationship between bacterial biofilms and the attachment of zoospores of the green macroalga Enteromorpha. Zoospore attachment to glass slides was enhanced in the presence of a bacterial biofilm assemblage, and the number attaching increased with the number of bacteria present. Zoospores also attached to control surfaces, but at lower numbers; glass surfaces conditioned in autoclaved seawater had the same number of zoospores attached as new glass surfaces. The spatial relationship between bacterial cells and attached zoospores was quantified by image analysis. The hypothesis tested was that zoospores attached preferentially to, or in the very close vicinity of, bacterial cells. Spatial microscopic analysis showed that more bacteria were covered by zoospores than would be expected if zoospore attachment was a random process and zoospores appeared to attach to bacterial clusters. The most likely explanation is that zoospores are attracted to bacterial cells growing on surfaces and the presence of a bacterial biofilm enhances their settlement. The possibility is discussed that Enteromorpha zoospores respond to a chemical signal produced by bacteria, i.e. that there may be prokaryote‐eukaryote cell signalling.