Functional recombinant MHC class II molecules and high-throughput peptide-binding assays

Background

Molecules of the class II major histocompability complex (MHC-II) specifically bind and present exogenously derived peptide epitopes to CD4+ T helper cells. The extreme polymorphism of the MHC-II hampers the complete analysis of peptide binding. It is also a significant hurdle in the generation of MHC-II molecules as reagents to study and manipulate specific T helper cell responses. Methods to generate functional MHC-II molecules recombinantly, and measure their interaction with peptides, would be highly desirable; however, no consensus methodology has yet emerged.

Results

We generated α and β MHC-II chain constructs, where the membrane-spanning regions were replaced by dimerization motifs, and the C-terminal of the β chains was fused to a biotinylation signal peptide (BSP) allowing for in vivo biotinylation. These chains were produced separately as inclusion bodies in E. coli , extracted into urea, and purified under denaturing and non-reducing conditions using conventional column chromatography. Subsequently, diluting the two chains into a folding reaction with appropriate peptide resulted in efficient peptide-MHC-II complex formation. Several different formats of peptide-binding assay were developed including a homogeneous, non-radioactive, high-throughput (HTS) binding assay. Binding isotherms were generated allowing the affinities of interaction to be determined. The affinities of the best binders were found to be in the low nanomolar range. Recombinant MHC-II molecules and accompanying HTS peptide-binding assay were successfully developed for nine different MHC-II molecules including the DPA1*0103/DPB1*0401 (DP401) and DQA1*0501/DQB1*0201, where both α and β chains are polymorphic, illustrating the advantages of producing the two chains separately.

Conclusion

We have successfully developed versatile MHC-II resources, which may assist in the generation of MHC class II -wide reagents, data, and tools.     

Recombinant HLA-DP2 binds beryllium and tolerizes beryllium-specific pathogenic CD4+ T cells

Chronic beryllium disease is a lung disorder caused by beryllium exposure in the workplace and is characterized by granulomatous inflammation and the accumulation of beryllium-specific, HLA-DP2-restricted CD4+ T lymphocytes in the lung that proliferate and secrete Th1-type cytokines. To characterize the interaction among HLA-DP2, beryllium, and CD4+ T cells, we constructed rHLA-DP2 and rHLA-DP4 molecules consisting of the alpha-1 and beta-1 domains of the HLA-DP molecules genetically linked into single polypeptide chains. Peptide binding to rHLA-DP2 and rHLA-DP4 was consistent with previously published peptide-binding motifs for these MHC class II molecules, with peptide binding dominated by aromatic residues in the P1 pocket. 9Be nuclear magnetic resonance spectroscopy showed that beryllium binds to the HLA-DP2-derived molecule, with no binding to the HLA-DP4 molecule that differs from DP2 by four amino acid residues. Using beryllium-specific CD4+ T cell lines derived from the lungs of chronic beryllium disease patients, beryllium presentation to those cells was independent of Ag processing because fixed APCs were capable of presenting BeSO4 and inducing T cell proliferation. Exposure of beryllium-specific CD4+ T cells to BeSO4 -pulsed, plate-bound rHLA-DP2 molecules induced IFN-gamma secretion. In addition, pretreatment of beryllium-specific CD4+ T cells with BeSO4-pulsed, plate-bound HLA-DP2 blocked proliferation and IL-2 secretion upon re-exposure to beryllium presented by APCs. Thus, the rHLA-DP2 molecules described herein provide a template for engineering variants that retain the ability to tolerize pathogenic CD4+ T cells, but do so in the absence of the beryllium Ag.     

Positive correlation between oligonucleotide typing and T-cell recognition of HLA-DP molecules

The identification of 19 different HLA-DPB1 sequences implicates the existence of more DP specificities than can be typed for with cellular methods. How many of the DP sequences can be specifically recognized by T cells, and which of the polymorphic regions can contribute to the specificity of allorecognition, is not known. In order to investigate the distribution and the immunological relevance of recently described DPB1 alleles, we have typed a panel of 98 randomly selected Dutch Caucasoid donors for the HLA-DPB1 locus by oligonucleotide typing. Comparison of the typing results with primed lymphocyte typing (PLT) defined DP specificities shows an extremely good correlation. Moreover, additional alleles could be defined by oligonucleotide typing reducing the number of DP blanks in the panel. By selecting the appropriate responder stimulator combinations we were able to show that distinctive PLT reagents against oligonucleotide defined specificities DPB1*0401, DPB1*0402, DPB1*0901, and DPB1*1301 can be generated. To investigate in more detail which part of the DP molecule is responsible for the specificity of T-cell recognition, T-cell clones were generated against HLA-DPw3. The clones were tested for the recognition of stimulators carrying DPB1 alleles which had been defined by oligonucleotide typing and sequence analyses and which differed in a variable degree from DPB1*0301. The recognition patterns demonstrated that differences of one amino acid in polymorphic regions situated either in the beta sheets or alpha helix of the hypothetical model of the HLA class II molecule can eliminate T-cell recognition. Furthermore, sequence analyses revealed a new DPB1 allele designated DPB1*Oos.The nucleotide sequence data reported in this paper have been submitted to the GenBank nucleotide sequence database and have been assigned the accession number M58608. The name DPB1*2001 has officially been assigned to the DPB*Oos allele by the WHO nomenclature Committee in March 1991. This follows the agreed policy that, subject to the conditions stated in the most recent Nomenclature Report (Bodmer et al. 1990b), names will be assigned as they are identified. Lists of such new names will be published in the following WHO nomenclature report.     

Changes at the floor of the peptide-binding groove induce a strong preference for proline at position 3 of the bound peptide: molecular dynamics simulations of HLA-A*0217

We report on molecular dynamics simulations of major histocompatibility complex (MHC)-peptide complexes. Class I MHC molecules play an important role in cellular immunity by presenting antigenic peptides to cytotoxic T cells. Pockets in the peptide-binding groove of MHC molecules accommodate anchor side chains of the bound peptide. Amino acid substitutions in MHC affect differences in the peptide-anchor motifs. HLA-A*0217, human MHC class I molecule, differs from HLA-A*0201 only by three amino acid residues substitutions (positions 95, 97, and 99) at the floor of the peptide-binding groove. A*0217 showed a strong preference for Pro at position 3 (p3) and accepted Phe at p9 of its peptide ligands, but these preferences have not been found in other HLA-A2 ligands. To reveal the structural mechanism of these observations, the A*0217-peptide complexes were simulated by 1000 ps molecular dynamics at 300 K with explicit solvent molecules and compared with those of the A*0201-peptide complexes. We examined the distances between the anchor side chain of the bound peptide and the pocket, and the rms fluctuations of the bound peptides and the HLA molecules. On the basis of the results from our simulations, we propose that Pro at p3 serves as an optimum residue to lock the dominant anchor residue (p9) tightly into pocket F and to hold the peptide in the binding groove, rather than a secondary anchor residue fitting optimally the complementary pocket. We also found that Phe at p9 is used to occupy the space created by replacements of three amino acid residues at the floor within the groove. These findings would provide a novel understanding in the peptide-binding motifs of class I MHC molecules.     

Functional classification of class II human leukocyte antigen (HLA) molecules reveals seven different supertypes and a surprising degree of repertoire sharing across supertypes

Previous studies have attempted to define human leukocyte antigen (HLA) class II supertypes, analogous to the case for class I, on the basis of shared peptide-binding motifs or structure. In the present study, we determined the binding capacity of a large panel of non-redundant peptides for a set of 27 common HLA DR, DQ, and DP molecules. The measured binding data were then used to define class II supertypes on the basis of shared binding repertoires. Seven different supertypes (main DR, DR4, DRB3, main DQ, DQ7, main DP, and DP2) were defined. The molecules associated with the respective supertypes fell largely along lines defined by MHC locus and reflect, in broad terms, commonalities in reported peptide-binding motifs. Repertoire overlaps between molecules within the same class II supertype were found to be similar in magnitude to what has been observed for HLA class I supertypes. Surprisingly, however, the degree to which repertoires between molecules in the different class II supertypes also overlapped was found to be five to tenfold higher than repertoire overlaps noted between molecules in different class I supertypes. These results highlight a high degree of repertoire overlap amongst all HLA class II molecules, perhaps reflecting binding in multiple registers, and more pronounced dependence on backbone interactions rather than peptide anchor residues. This fundamental difference between HLA class I and class II would not have been predicted on the basis of analysis of either binding motifs or the sequence/predicted structures of the HLA molecules.     

Structural Basis for the Specific Recognition of the Major Antigenic Peptide from the Japanese Cedar Pollen Allergen Cry j 1 by HLA-DP5

The major allergen, Cry j 1, was isolated from Japanese cedar Cryptomeria japonica (Cry j) pollen and was shown to react with immunoglobulin E antibodies in the sera from pollinosis patients. We previously reported that the frequency of HLA-DP5 was significantly higher in pollinosis patients and the immunodominant peptides from Cry j 1 bound to HLA-DP5 to activate Th2 cells. In the present study, we determined the crystal structure of the HLA-DP5 heterodimer in complex with a Cry j 1-derived nine-residue peptide, at 2.4 Å resolution. The peptide-binding groove recognizes the minimal peptide with 10 hydrogen bonds, including those between the negatively charged P1 pocket and the Lys side chain at the first position in the peptide sequence. We confirmed that HLA-DP5 exhibits the same Cry j 1-binding mode in solution, through pull-down experiments using structure-based mutations of Cry j 1. We also identified the characteristic residues of HLA-DP5 that are responsible for the distinct properties of the groove, by comparing the structure of HLA-DP5 and the previously reported structures of HLA-DP2 in complexes with pDRA of the self-antigen. The comparison revealed that the HLA-DP5·pCry j 1 complex forms several hydrogen bond/salt bridge networks between the receptor and the antigen that were not observed in the HLA-DP2·pDRA complex. Evolutionary considerations have led us to conclude that HLA-DP5 and HLA-DP2 represent two major groups of the HLA-DP family, in which the properties of the P1 and P4 pockets have evolved and acquired the present ranges of epitope peptide-binding specificities.     

Molecular analysis of an HLA-DP mutant cell line selected for its resistance to killing by HLA-DPw2-specific T-cell clones

A collection of HLA-DP mutants was generated, using ICR 191 as the mutagenic agent and resistance to lysis mediated by HLA-DPw2 allospecific cytotoxic T lymphocytes (CTLs) as the selection criterion. These mutants were derived from the HLA haploid lymphoblastoid cell line 45.1. Loss of HLA-DPw2 surface expression accounted for the lack of HLA-DPw2 CTL recognition in all the mutants. However, one of them, 45.EM19, binds to DPw2-specific monoclonal antibodies (mAb) after cell permeabilization. HLA-DPA1 and DPB1 mRNA expression studies permitted the classification of the mutants in four categories: 1) DPA1-negative, DPB1-positive; 2) DPA1-positive, DPB1-negative; 3) DPA1- and DPB1-negative, and 4) DPA1- and DPB1-positive mutants. Mutant 45.EM19 is included in the last group. The cloning and sequencing of the full-length DPA1 (DPA1*0103) and DPB1 (DPB1*02012) cDNAs from this mutant showed no changes in the DPA1 sequence compared to the wild-type sequence. However, a frame-shift mutation in the DPB1 gene exon coding for the transmembrane region was detected. The insertion of a guanine nucleotide provokes an extension of the open reading frame, increasing the length of the C-terminal domain and changing the hydropathicity pattern of the transmembrane domain. This change should be responsible for the phenotype of the 45.EM19 mutant. Correspondence to: Dr. M. Sánchez-Pérez.     

Peptide motif for the rat MHC class II molecule RT1.Da: similarities to the multiple sclerosis-associated HLA-DRB1*1501 molecule

Experimental autoimmune encephalomyelitis induced with myelin proteins in DA and LEW.1AV1 rats is a model of multiple sclerosis (MS). It reproduces major aspects of this detrimental disease of the central nervous system. MS is associated with the HLA-DRB1*1501, DRB5*0101, and DQB1*0602 haplotype. DA and LEW.1AV1 rats share the RT1^av1 haplotype. So far, no MHC class II peptide motif of RT1.D^a molecules has been described. Sequence alignment of the chain of the rat MHC class II molecule RT1.D^a with human HLA class II molecules revealed strong similarity in the peptide-binding groove of RT1.D^a and HLA-DRB1*1501. According to the putative peptide-binding pockets of RT1.D^a, after comparison with the pockets of HLA-DRB1*1501, we predicted the peptide motif of RT1.D^a. To verify the predicted motif, naturally processed peptides were eluted by acidic treatment from immunoaffinity-purified RT1.D^a molecules of lymphoid tissue of DA rats and subsequently analyzed by ESI tandem mass spectrometry. In addition, we performed binding studies with combinatorial nonapeptide libraries to purified RT1.D^a molecules. Based on these studies we could define a peptide-binding motif for RT1.D^a characterized by aliphatic amino acid residues (L, I, V, M) and of F for the peptide pocket P1, aromatic residues (F, Y, W) for P4, basic residues (K, R) for P6, aliphatic residues (I, L, V) for P7, and aromatic residues (F, Y, W) and L for P9. Both methods revealed similar binding characteristics for peptides to RT1.D^a. This data will allow epitope predictions for analysis of peptides, relevant for experimental autoimmune diseases.     

Molecular characterization by high resolution isoelectric focusing of the products encoded by the class II region loci of the MHC in humans. II. DP alpha and DP beta gene variants

To characterize the molecular polymorphism of the DP alpha and DP beta gene products, the HLA-DP molecules expressed by more than 200 cell lines were individually immunoprecipitated by using the mAb B7/21 and their neuraminidase-treated DP alpha and DP beta chains analyzed in IEF gels. These cell lines, most of them from members of 32 families, allowed the definition, by segregation analysis, of the IEF patterns of the DP polypeptide chains encoded by 129 distinct haplotypes. Both DP alpha and DP beta chains display polymorphic IEF-banding patterns. Two DP alpha (A and B) and seven DP beta (A, B, C, D, E, F, and G) IEF variants were characterized. The DP alpha B variant was found in linkage disequilibrium with both DP beta B and DP beta D. Linkage disequilibrium was also encountered with alleles at the DR and DQ loci. Finally, the correlations between the IEF DP alpha and DP beta variants and the primed lymphocyte test-defined HLA-DP specificities were determined by using a panel of 24 primed lymphocyte test-typed cell lines.     

Porcine major histocompatibility complex (MHC) class I molecules and analysis of their peptide-binding specificities

In all vertebrate animals, CD8⁺ cytotoxic T lymphocytes (CTLs) are controlled by major histocompatibility complex class I (MHC-I) molecules. These are highly polymorphic peptide receptors selecting and presenting endogenously derived epitopes to circulating CTLs. The polymorphism of the MHC effectively individualizes the immune response of each member of the species. We have recently developed efficient methods to generate recombinant human MHC-I (also known as human leukocyte antigen class I, HLA-I) molecules, accompanying peptide-binding assays and predictors, and HLA tetramers for specific CTL staining and manipulation. This has enabled a complete mapping of all HLA-I specificities (“the Human MHC Project”). Here, we demonstrate that these approaches can be applied to other species. We systematically transferred domains of the frequently expressed swine MHC-I molecule, SLA-1*0401, onto a HLA-I molecule (HLA-A*11:01), thereby generating recombinant human/swine chimeric MHC-I molecules as well as the intact SLA-1*0401 molecule. Biochemical peptide-binding assays and positional scanning combinatorial peptide libraries were used to analyze the peptide-binding motifs of these molecules. A pan-specific predictor of peptide–MHC-I binding, NetMHCpan, which was originally developed to cover the binding specificities of all known HLA-I molecules, was successfully used to predict the specificities of the SLA-1*0401 molecule as well as the porcine/human chimeric MHC-I molecules. These data indicate that it is possible to extend the biochemical and bioinformatics tools of the Human MHC Project to other vertebrate species.     

Large scale mass spectrometric profiling of peptides eluted from HLA molecules reveals N-terminal-extended peptide motifs

The majority of >2000 HLA class I molecules can be clustered according to overlapping peptide binding specificities or motifs recognized by CD8(+) T cells. HLA class I motifs are classified based on the specificity of residues located in the P2 and the C-terminal positions of the peptide. However, it has been suggested that other positions might be relevant for peptide binding to HLA class I molecules and therefore be used for further characterization of HLA class I motifs. In this study we performed large-scale sequencing of endogenous peptides eluted from K562 cells (HLA class I null) made to express a single HLA molecule from HLA-B*3501, -B*3502, -B*3503, -B*3504, -B*3506, or -B*3508. Using sequence data from >1,000 peptides, we characterized novel peptide motifs that include dominant anchor residues extending to all positions in the peptide. The length distribution of HLA-B35-bound peptides included peptides of up to 15 residues. Remarkably, we determined that some peptides longer than 11 residues represented N-terminal-extended peptides containing an appropriate HLA-B35 peptide motif. These results provide evidence for the occurrence of endogenous N-terminal-extended peptide-HLA class I configurations. In addition, these results expand the knowledge about the identity of anchor positions in HLA class I-associated peptides that can be used for characterization of HLA class I motifs.     

Classification of A1- and A24-supertype molecules by analysis of their MHC-peptide binding repertoires

At the functional level, the majority of human leukocyte antigen (HLA) class I MHC variants can be classified into about ten different major groups, or supertypes, characterized by overlapping peptide binding motifs and repertoires. Previous studies have detailed the peptide binding specificity of the HLA A2, A3, B7, and B44 supertypes, and predicted, on the basis of MHC pocket structures, known motifs, or the sequence of T cell epitopes, the existence of the HLA A1 and A24 supertypes. Direct experimental validation of the A1 and A24 supertypes, however, has been lacking. In the current study, the peptide-binding repertoires and main anchor specificities of several common HLA A molecules (A*0101, A*2301, A*2402, A*2601, A*2902, and A*3002) predicted to be members of the A1 or A24 supertypes were analyzed and defined using single amino acid substituted peptides and a large peptide library. Based on the present findings, the A1 supertype includes A*0101, A*2601, A*2902, and A*3002, whereas the A24 supertype includes A*2301 and A*2402. Interestingly, A*2902 is associated with a motif and peptide binding repertoire that overlaps significantly with those of all of the A1- and A24-supertype molecules studied, representing—to our knowledge—the first report of significant cross-reactivity among molecules belonging to different supertypes.     

Biased T-cell receptor usage is associated with allelic variation in the MHC class II peptide binding groove

 A comprehensive analysis was carried out of the tri-molecular complex of peptide, major histocompatibility class II molecule, and T-cell receptor (TcR) involved in the recognition of the promiscuous HA (306–318) peptide, restricted by one of two closely related HLA-DR alleles, HLA-DRB1*0101 and HLA-DRB1*0103. These two DR molecules differ by only three amino acids at positions 67, 70, and 71, in the third variable region of the DRB1 chain. None of the HA (306–318)-specific T-cell clones restricted by these two DR molecules tolerated amino acid substitution at the peptide-binding position 71, despite the fact that the substitution did not interfere with peptide binding. The majority of the DRB1*0103-restricted clones tolerated substitution of the amino acid at the TcR-contacting position 70, while the DRB1*0101-restricted T cells did not. Biased usage of TRVA and TRVB segments was observed for the DRB1*0103-restricted clones; in contrast, apparently random usage was seen in the DRB1*0101-restricted T cells. Finally, limiting dilution analysis revealed a lower frequency of T cells reactive with the HA peptide in a DRB1*0103 compared with a DRB1*0101 individual. Taken together these data suggest that biased TcR gene usage may reflect a relatively low precursor frequency of T cells, and the need for clonal expansion of a limited set of high avidity T cells. Received: 7 August 1998 / Revised: 19 November 1998     

Potential binding modes of beryllium with the class II major histocompatibility complex HLA-DP: a combined theoretical and structural database study

In an effort to understand the molecular basis of chronic beryllium disease (CBD), a study of the chemical relationship between beryllium, antigen, and the major histocompatibility complex II, HLA-DP, was undertaken. A homology model of the HLA-DP protein was developed. An analysis of the sequences of HLA-DPB1 and HLA-DPA1 alleles most common among CBD patients revealed several carboxylate rich regions in the peptide-binding cleft. These regions contain many hard Lewis base sites that may provide bonding opportunities for beryllium, a hard Lewis acid. Quantum chemistry calculations and structural database results support the presence of beryllium clusters, bridged by carboxylate, hydroxo, and/or oxo ligands, in the HLA-DP binding cleft. These results strongly suggest that beryllium clusters are an integral part of the antigen, and may even act solely as antigen. This work provides an initial model for thinking about beryllium interactions with proteins relevant to CBD and other metal-induced diseases.     

Position 45 influences the peptide binding motif of HLA-B*44:08

Position 45 represents a highly polymorphic residue within HLA class I alleles, which contacts the p2 position of bound peptides in 85% of the peptide–HLA structures analyzed, while the neighboring residues 41 and 46 are not involved in peptide binding. To investigate the influence of residue 45 at the functional level, we sequenced peptides eluted from recombinant HLA-B*44:08^{41Ala/45Met/46Ala} molecules and compared their features with known peptides from B*44:02^{41Thr/45Lys/46Glu}. While HLA-B*44:02 has an anchor motif of E at the p2 anchor position, HLA-B*44:08 exhibits Q and L as anchor motif. The 45^Met/Lys polymorphism contributes to the alteration in the peptide-binding motif and provides further evidence that mismatches at position 45 should be considered as nonpermissive in a transplantation setting.     

Allelic variation in key peptide-binding pockets discriminates between closely related diabetes-protective and diabetes-susceptible HLA-DQB1*06 alleles

HLA-DQA1*0102-DQB1*0602 is associated with protection against type 1 diabetes (T1D). A similar allele, HLA-DQA1*0102-DQB1*0604, contributes to T1D susceptibility in certain populations but differs only at seven amino acids from HLA-DQA1*0102-DQB1*0602. Five of these polymorphisms are found within the peptide-binding groove, suggesting that differences in peptide binding contribute to the mechanism of their association with T1D. In this study, we determine the peptide-binding motif for HLA-DQA1*0102-DQB1*0604 allelic protein (DQ0604) in comparison to the established HLA-DQA1*0102-DQB1*0602 (DQ0602) motif using binding assays with model peptides from T1D autoantigens and homology modeling using the coordinates of the DQ0602-hypocretin 1-13 crystal structure. The peptide binding preferences were deduced with a peptide from insulin that bound both with a 2- to 3-fold difference in avidity using the same amino acids in the peptide as anchors. Peptide binding differences directly influenced by the polymorphisms in or nearby pockets 1, 6, and 9 were observed. In pocket 1, DQ0604 was better able to accommodate aromatic residues due to the beta86 and beta87 polymorphisms. A negatively charged amino acid was preferred by DQ0604 in pocket 6 due to the positively charged beta30His. In pocket 9, DQ0604 preferred aromatic amino acids due to the beta9 and beta30 polymorphisms and had low tolerance of acidic residues. beta57Val in DQ0604 functions differently than beta57Ala, in that it pushes alpha76Arg outside of the pocket, preventing the formation of a salt bridge with an acidic amino acid in the peptide. This study furthers our understanding of the structure-function relationships of MHC class II polymorphisms.     

Structures of three HIV-1 HLA-B*5703-peptide complexes and identification of related HLAs potentially associated with long-term nonprogression

Long-term nonprogression during acute HIV infection has been strongly associated with HLA-B*5701 or HLA-B*5703. In this study, we present the high resolution crystal structures of HLA-B*5703 complexes with three HIV-1 epitopes: ISPRTLNAW (ISP), KAFSPEVIPMF (KAF-11), and KAFSPEVI (KAF-8). These reveal peptide anchoring at position 2 and their C termini. The different peptide lengths and primary sequences are accommodated by variation in the specific contacts made to the HLA-B*5703, flexibility in water structure, and conformational adjustment of side chains within the peptide-binding groove. The peptides adopt markedly different conformations, and trap variable numbers of water molecules, near a cluster of tyrosine side chains located in the central region of the peptide-binding groove. The KAF-11 epitope completely encompasses the shorter KAF-8 epitope but the peptides are presented in different conformations; the KAF-11 peptide arches out of the peptide-binding groove, exposing a significant main chain surface area. Bioinformatic analysis of the MHC side chains observed to contribute to the peptide anchor specificity, and other specific peptide contacts, reveals HLA alleles associated with long-term nonprogression and a number of related HLA alleles that may share overlapping peptide repertoires with HLA-B*5703 and thus may display a similar capacity for efficient immune control of HIV-1 infection.