Utilization of the rpoB Gene as a Specific Chromosomal Marker for Real-Time PCR Detection of Bacillus anthracis

The potential use of Bacillus anthracis as a weapon of mass destruction poses a threat to humans, domesticated animals, and wildlife and necessitates the need for a rapid and highly specific detection assay. We have developed a real-time PCR-based assay for the specific detection of B. anthracis by taking advantage of the unique nucleotide sequence of the B. anthracis rpoB gene. Variable region 1 of the rpoB gene was sequenced from 36 Bacillus strains, including 16 B. anthracis strains and 20 other related bacilli, and four nucleotides specific for B. anthracis were identified. PCR primers were selected so that two B. anthracis-specific nucleotides were at their 3′ ends, whereas the remaining bases were specific to the probe region. This format permitted the PCR reactions to be performed on a LightCycler via fluorescence resonance energy transfer (FRET). The assay was found to be specific for 144 B. anthracis strains from different geographical locations and did not cross-react with other related bacilli (175 strains), with the exception of one strain. The PCR assay can be performed on isolated DNA as well as crude vegetative cell lysates in less than 1 h. Therefore, the rpoB-FRET assay could be used as a new chromosomal marker for rapid detection of B. anthracis.     

Genome differences that distinguish Bacillus anthracis from Bacillus cereus and Bacillus thuringiensis

The three species of the group 1 bacilli, Bacillus anthracis, B. cereus, and B. thuringiensis, are genetically very closely related. All inhabit soil habitats but exhibit different phenotypes. B. anthracis is the causative agent of anthrax and is phylogenetically monomorphic, while B. cereus and B. thuringiensis are genetically more diverse. An amplified fragment length polymorphism analysis described here demonstrates genetic diversity among a collection of non-anthrax-causing Bacillus species, some of which show significant similarity to B. anthracis. Suppression subtractive hybridization was then used to characterize the genomic differences that distinguish three of the non-anthrax-causing bacilli from B. anthracis Ames. Ninety-three DNA sequences that were present in B. anthracis but absent from the non-anthrax-causing Bacillus genomes were isolated. Furthermore, 28 of these sequences were not found in a collection of 10 non-anthrax-causing Bacillus species but were present in all members of a representative collection of B. anthracis strains. These sequences map to distinct loci on the B. anthracis genome and can be assayed simultaneously in multiplex PCR assays for rapid and highly specific DNA-based detection of B. anthracis.     

Rapid and sensitive identification of pathogenic and apathogenic Bacillus anthracis by real-time PCR

Bacillus anthracis spores have been shown to be an efficient biological weapon and their recent use in bioterrorist attacks has demonstrated the need for rapid and specific diagnostics. A TaqMan real-time PCR for identification of B. anthracis was developed, based on the two plasmids, pX01 and pX02, both of which are necessary for pathogenicity, as well as on the chromosomally encoded rpoB gene. Bacteria picked from colonies or pelleted from liquid cultures were directly inoculated into the PCR mix, thus avoiding time-consuming DNA preparation and minimizing handling risks. B. anthracis spores were cultivated for a few hours in enrichment broth before PCR analysis, or used directly for real-time PCR, thus allowing to confirm or exclude potential attacks approximately 2-3 h after the material has arrived in the laboratory.     

A DNA microarray facilitates the diagnosis of Bacillus anthracis in environmental samples

Aims:  In order to improve the diagnosis of Bacillus anthracis in environmental samples, we established a DNA microarray based on the ArrayTube technology of Clondiag.
Methods and Results:  Total DNA of a bacterial colony is randomly biotinylated and hybridized to the array. The probes on the array target the virulence genes, the genomic marker gene rpoB , as well as the selective 16S rDNA sequence regions of B. anthracis , of the Bacillus cereus group and of Bacillus subtilis . Eight B. anthracis reference strains were tested and correctly identified. Among the analysed environmental Bacillus isolates, no virulent B. anthracis strain was detected.
Conclusions:  This array clearly differentiates B. anthracis from members of the B. cereus group and other Bacillus species in environmental samples by chromosomal ( rpoB ) and plasmid markers. Additionally, recognition of B. cereus strains harbouring the toxin genes or atypical B. anthracis strains that have lost the virulence plasmids is feasible.
Significance and Impact of the Study:  The array is applicable to the complex diagnostics for B. anthracis detection in environmental samples. Because of low costs, high security and easy handling, the microarray is applicable to routine diagnostics.     

Sensitive detection of Bacillus anthracis using a binding protein originating from gamma-phage

Detection of biological weapons is a primary concern in force protection, treaty verification, and safeguarding civilian populations against domestic terrorism. One great concern is the detection of Bacillus anthracis, the causative agent of anthrax. Therefore, there is a pressing need to develop novel methods for rapid, simple, and precise detection of B. anthracis. Here, we report that the C-terminal region of gamma-phage lysin protein (PlyG) binds specifically to the cell wall of B. anthracis and the recombinant protein corresponding to this region (positions, 156-233), PlyGB, is available as a bioprobe for detection of B. anthracis. Our detection method, based on a membrane direct blot assay using recombinant PlyGB, was more rapid and sensitive than the gamma-phage test and was simpler and more inexpensive than genetic methods such as PCR, or immunological methods using specific antibodies. Furthermore, its specificity was comparable to the gamma-phage test. PlyGB is applicable in conventional methods instead of antibodies and could be a potent tool for detection of B. anthracis.     

Identification and characterization of Bacillus anthracis by multiplex PCR on DNA chip

Bacillus anthracis can be identified by detecting virulence factor genes located on two plasmids, pXO1 and pXO2. Combining multiplex PCR with arrayed anchored primer PCR and biotin-avidin alkaline phosphatase indicator system, we developed a qualitative DNA chip method for characterization of B. anthracis, and simultaneous confirmation of the species identity independent of plasmid contents. The assay amplifies pag gene (in pXO1), cap gene (in pXO2) and Ba813 gene (a B. anthracis specific chromosomal marker), and the results were indicated by an easy-to-read profile based on the color reaction of alkaline phosphatase. About 1 pg of specific DNA fragments on the chip wells could be detected after PCR. With the proposed method, the avirulent (pXO1+/2-, pXO1-/2+ and pXO1-/2-) strains of B. anthracis and distinguished 'anthrax-like' strains from other B. cereus group bacteria were unambiguously identified, while the genera other than Bacillus gave no positive signal.     

Differential identification of Bacillus anthracis from environmental Bacillus species using microarray analysis

AIMS: To determine whether microarray analysis could be employed for the differential identification of a range of environmental Bacillus sp. from four strains of Bacillus anthracis. METHODS AND RESULTS: Oligonucleotide probes were designed that were specific to virulence factor genes of B. anthracis (pag, lef and cap), the variable number tandem repeat region of the B. anthracis vrrA gene and to the 16S-23S rRNA intergenic transcribed spacer region (ITS) and pleiotropic regulator (plcR) regions of the Bacillus cereus subgroup species. Generic probes were also designed to hybridize with conserved regions of the 16S rRNA genes of Bacillus (as a positive control), Neisseria sp., Pseudomonas sp., Streptococcus sp., Mycobacterium sp. and to all members of the Enterobacteriaceae to allow simultaneous detection of these bacteria. Identification of B. anthracis was found to rely entirely on hybridization of DNA specific to regions of the pag, lef and cap genes. Cross-reaction was observed between B. anthracis and other Bacillus species with all the other Bacillus probes tested. Results obtained using microarray hybridizations were confirmed using conventional microbiological techniques and found to have very high comparability. CONCLUSIONS: Microarray-based assays are an effective method for the identification of B. anthracis from mixed-culture environmental samples without problems of false-positivity that have been observed with conventional PCR assays. SIGNIFICANCE AND IMPACT OF THE STUDY: Identification of environmental Bacillus sp. by conventional PCR is prone to potential for reporting false-positives. This study provides a method for the exclusion of such isolates.     

Multiplex amplification test system for the identification and differentiation of Bacillus anthracis

The multiplex amplification test system for the identification of Bacillus anthracis with primers to plasmid cya (pX01), capC (pX02) genes and chromosomal sap gene were developed. The primers to sap gene were selected by the authors and, after being tested on 72 microbial strains of the genus Bacillus, proposed as more specific in comparison with the known primers to chromosomal locus Ba 813. The proposed test system permitted the simultaneous identification of B. anthracis of all plasmid variants, the evaluation of their potential virulence and the differentiation of B. anthracis nonplasmid strains from bacilli of the group Bacillus cereus.     

Fluorescent detection techniques for real-time multiplex strand specific detection of Bacillus anthracis using rapid PCR

Speed is a key area in our development of PCR assays for Bacillus anthracis. We believe that the strand specific detection of amplicons within 10 min is a realistic goal and that this will be achieved through fluorescent in-tube assays. We have used the Idaho LightCycler to study and develop candidate assays for B. anthracis. New strand specific fluorescent methods have been developed and a number of formats have been studied for speed and sensitivity. Internal controls have been developed as a method of improving our assay confidence. In this communication we will introduce the field of rapid PCR whilst discussing previous work in the areas described above, the development of our own rapid assay and a novel internal control system for B. anthracis. This work used PCR assays and hardware that are either commercially available, or have been previously described in open literature publications.     

Development of real-time PCR assays for detection and quantification of Bacillus cereus group species: differentiation of B. weihenstephanensis and rhizoid B. pseudomycoides isolates from milk

Quantitative real-time PCR (qRT-PCR) offers an alternative method for the detection of bacterial contamination in food. This method provides the quantitation and determination of the number of gene copies. In our study, we established an RT-PCR assay using the LightCycler system to detect and quantify the Bacillus cereus group species, which includes B. cereus, B. anthracis, B. thuringiensis, B. weihenstephanensis, B. mycoides, and B. pseudomycoides. A TaqMan assay was designed to detect a 285-bp fragment of the motB gene encoding the flagellar motor protein, which was specific for the detection of the B. cereus group species, excluding B. pseudomycoides, and the detection of a 217-bp gene fragment of a hypothetical protein specific only for B. pseudomycoides strains. Based on three hydrolysis probes (MotB-FAM-1, MotB-FAM-2, and Bpm-FAM-1), it was possible to differentiate B. weihenstephanensis from the B. cereus group species with nonrhizoid growth and B. pseudomycoides from the whole B. cereus group. The specificity of the assay was confirmed with 119 strains belonging to the Bacillus cereus group species and was performed against 27 other Bacillus and non-Bacillus bacteria. A detection limit was determined for each assay. The assays performed well not only with purified DNA but also with DNA extracted from milk samples artificially contaminated with bacteria that belong to the B. cereus group species. This technique represents an alternative approach to traditional culture methods for the differentiation of B. cereus group species and differentiates B. weihenstephanensis and B. pseudomycoides in one reaction.     

The development and assessment of DNA and oligonucleotide probes for the specific detection of Bacillus anthracis

Two DNA probes and a number of oligonucleotide probes were designed from the virulence factor genes of Bacillus anthracis. These probes were tested for specificity against 52 B. anthracis strains and 233 Bacillus strains encompassing 23 other species. A rapid slot blotting technique was used for screening the large numbers of isolates involved. All probes tested appeared to be specific for B. anthracis under high stringency conditions. These probes could differentiate between virulent and avirulent strains. The probes were also applied to the detection of B. anthracis in routine environmental and clinical samples. A non-radioactive hybridization and detection system based on digoxigenin-11-dUTP was developed.     

Specific Bacillus anthracis identification by a plcR-targeted restriction site insertion-PCR (RSI-PCR) assay

A RSI-PCR assay was developed for the detection of a Bacillus anthracis-specific nonsense mutation in the plcR gene. The assay specificity was tested using 170 Bacillus spp. strains including 47 strains of B. anthracis. The plcR RSI-PCR distinguished Bacillus cereus group strains closely related to B. anthracis from the anthrax agent. The assay was found to be a robust, simple and cost effective tool for B. anthracis identification. In contrast to previously developed real time PCR-based methods, the RSI-PCR needs basic molecular biology equipment only, and thus may be easily introduced in developing countries, where anthrax is endemic.     

Bacillus anthracis but not always anthrax.

Gram-positive bacilli isolated during epidemiological investigations which, on the basis of conventional tests, resemble Bacillus anthracis but which fail to produce the capsule or to induce anthrax in test animals have long been dismissed in clinical and veterinary laboratories as B. cereus or simply as unidentified Bacillus spp. and thereupon discarded as inconsequential. In this study, the application of newly available DNA probe, polymerase chain reaction and specific toxin antigen detection technology has revealed that a proportion of such strains are B. anthracis which lack the plasmid carrying the capsule gene (pXO2). While these techniques cannot, of course, be used to confirm the identities of strains resembling B. anthracis but which also lack the plasmid carrying the toxin genes (pXO1), the likelihood that these also are bona fide B. anthracis becomes more acceptable. (As yet no naturally occurring pXO1-/2+ strains have been found.) At this point, the significance of the presence of such avirulent forms of B. anthracis in specimens can only be a subject for speculation, but the possibility that they may be indicators of virulent parents somewhere in the system being examined must be considered.     

Bacillus anthracis but not always anthrax

Gram-positive bacilli isolated during epidemiological investigations which, on the basis of conventional tests, resemble Bacillus anthracis but which fail to produce the capsule or to induce anthrax in test animals have long been dismissed in clinical and veterinary laboratories as B. cereus or simply as unidentified Bacillus spp. and thereupon discarded as inconsequential. In this study, the application of newly available DNA probe, polymerase chain reaction and specific toxin antigen detection technology has revealed that a proportion of such strains are B. anthracis which lack the plasmid carrying the capsule gene (pXO2). While these techniques cannot, of course, be used to confirm the identities of strains resembling B. anthracis but which also lack the plasmid carrying the toxin genes (pXO1), the likelihood that these also are bonajide B. anthracis becomes more acceptable. (As yet no naturally occurring pXOl^-/2⁺ strains have been found.) At this point, the significance of the presence of such avirulent forms of B. anthracis in specimens can only be a subject for speculation, but the possibility that they may be indicators of virulent parents somewhere in the system being examined must be considered.     

Development of a PCR assay for identification of the Bacillus cereus group species

Aims:  A PCR technique was developed as a reliable and rapid identification method for the Bacillus cereus group species, based on a unique conserved sequence of the motB gene (encoding flagellar motor protein) from B. cereus , Bacillus thuringiensis and Bacillus anthracis .
Methods and Results:  Primer locations were identified against eight strains of the B. cereus group spp. from nucleotide sequences available in the National Centre for Biotechnology Information database. The PCR assay was applied for the identification of 117 strains of the B. cereus group spp. and 19 strains from other microbial species, with special emphasis on foodborne pathogens.
Conclusion:  The designed cross-species primers are group specific and did not react with DNA from other Bacillus and non- Bacillus species either motile or not. The primers system enabled us to detect 10³ CFU of B. cereus cells per millilitre of sample.
Significance and Impact of the Study:  Bacillus cereus group spp. belongs to one of the most prevalent foodborne pathogens. Bacterial growth results in production of different toxins; therefore, consumption of food containing >10⁶ bacteria per gram may result in emetic and diarrhoeal syndromes. A rapid and sensitive bacterial detection method is significant for food safety.     

Evaluation of different methods to discriminate Bacillus anthracis from other bacteria of the Bacillus cereus group

Aims:  To evaluate different methods that are useful for rapid and definitive discrimination of Bacillus anthracis from other bacteria of the Bacillus cereus group in environmental samples like letters claimed to contain anthrax spores.
Methods and Results:  Characterized strains and bacteria from environmental samples were analysed by microbiological and molecular methods (PCR and restriction analysis). Environmental isolates often shared several microbiological features with B. anthracis , e.g. lack of β -haemolysis and phospholipase C activity, and only the gamma phage assay was specific for B. anthracis . PCR assays targeting markers from the virulence plasmids exclusively detected B. anthracis , but other PCR targets were also detected in nonanthrax isolates. Additionally, the restriction pattern in an Alu I restriction analysis of the SG-749 fragment is not 100% specific. The loci used for multiple-locus variable-number tandem repeat analysis of B. anthracis are also present in other members of the B. cereus group, but amplicon sizes are usually different.
Conclusions:  Environmental samples often contain borderline isolates closely related to B. anthracis both on microbiological and genetic levels. Real-time PCR targeting plasmidal and chromosomal markers should be used for rapid and definitive exclusion of a virulent strain of B. anthracis in such samples.
Significance and Impact of the Study:  This study gives an overview of the current microbiological and molecular methods used for identification of B. anthracis and shows that most assays have limits when borderline isolates present in environmental samples are analysed.     

炭疽芽胞杆菌染色体特异序列的筛选及实时定量检测

筛选117条炭疽芽胞杆菌(Bacillusanthracis)特异序列,经双重特异性验证后得到19条理想的特异序列(genomicsignatures),其中6条符合设计TaqMan探针建立实时定量PCR的要求,根据常规PCR检测结果选择其中C04片段与炭疽芽胞杆菌毒性质粒pX01、pX02上的pagA、capB基因建立实时定量PCR检测体系。经试验证实这一体系检测灵敏度达到每PCR反应10~100个拷贝。利用12种相关菌株评价后获得100%特异性,对10份模拟污染标本和20份对照标本检测,所有污染标本均被检出,所有对照标本均为阴性。此方法特异、灵敏、高效,在炭疽芽胞杆菌感染的诊断和环境污染的检测等领域有潜在的应用前景。     

Genetic distribution of 295 Bacillus cereus group members based on adk-screening in combination with MLST (Multilocus Sequence Typing) used for validating a primer targeting a chromosomal locus in B. anthracis

The genetic distribution of 295 Bacillus cereus group members has been investigated by using a modified Multilocus Sequence Typing method (MLST). By comparing the nucleic acid sequence of the adk gene fragment, isolates of B. cereus group members most related to B. anthracis may be easily identified. The genetic distribution, with focus on the B. anthracis close neighbours, was used to evaluate a new primer set for specific identification of B. anthracis. This primer set, BA5510-1/2, targeted the putative B. anthracis specific gene BA5510. Real-time PCR using BA5510-1/2 amplified the target fragment from all B. anthracis strains tested and only two (of 289) non-B. anthracis strains analysed. This is one of the most thoroughly validated chromosomal B. anthracis markers for real-time PCR identification, in which the screened collection contained several very closely related B. anthracis strains.     

Generation of a specific marker to discriminate Gacillus anthracis from other bacteria of the Bacillus cereus group

Bacillus anthracis is a soil pathogen capable of causing anthrax that is closely related to several environmental species, including B. cereus, B. mycoides, and B. thuringiensis. DNA homology studies showed that B. anthracis, B. cereus, B. mycoides, and B. thuringiensis are closely related, with a high sequence homology. To establish a method to specifically detect B. anthracis in situations such as environmental contamination, we initially performed RAPD-PCR with a 10-mer random primer and confirmed the presence of specific PCR bands only in B. anthracis species. One region specific for B. anthracis was cloned and sequenced, and an internal primer set was designed to amplify a 241-bp DNA fragment within the sequenced region. The PCR system involving these specific primer sets has practical applications. Using lyses methods to prepare the samples for PCR, it was possible to quickly amplify the 241-bp DNA segment from samples containing only a few bacteria. Thus, the PCR detection method developed in this study is expected to facilitate the monitoring of environmental B. anthracis contamination.     

Molecular characterization of Bacillus anthracis using multiplex PCR, ERIC-PCR and RAPD

AIMS: To investigate the molecular characterization of Bacillus anthracis strains by multiplex PCR, enterobacterial repetitive intergenic consensus-PCR (ERIC-PCR) and random amplification of polymorphic DNA (RAPD). METHODS AND RESULTS: Three primers were used to amplify the cya, cap and cereolysinAB genes in the multiplex PCR. Two distinct ERIC-PCR and RAPD fragments, which separated B. anthracis into two groups, were used as probes in Southern hybridization experiments. The probes hybridized only to the cya+ B. anthracis strains identified by the multiplex PCR. Nucleotide sequence analysis of the two cloned fragments showed they were from the pXO1 plasmid of B. anthracis. CONCLUSION: Multiplex PCR simultaneously identified isolates of the Bacillus cereus group and the B. anthracis virulence factors. ERIC-PCR and RAPD, combined with the Southern hybridization analyses, differentiated B. anthracis strains and separated them from the closely related B. cereus group bacteria. SIGNIFICANCE AND IMPACT OF THE STUDY: ERIC-PCR and RAPD assay could be effective in differentiating virulent from avirulent B. anthracis. Our results also show that the amplification of the large plasmids was allowed in the ERIC-PCR and RAPD assay.