Efficient acetic acid production by repeated fed-batch fermentation using two fermentors

Summary In acetic acid fermentation, the number of viable cells decrease as the acetic acid concentration increases to more than about 40 g/l, which means that the productivity attainable by conventional fed-batch and repeated fed-batch operations using one fermentor is limited. In this paper, based on a fed-batch experiment using Acetobacter aceti 2096, a mathematical model was developed. The optimization carried out showed the superiority of repeated fed-batch operation using two fermentors. The performance evaluation was made with respect to productivity and product concentration. It was shown to be attractive in practice to use multiple fermentors, in particular for high product concentrations. Experiments were then conducted to ascertain the simulation results. Offprint requests to: T. Kobayashi     

Production of 2,3-butanediol in a membrane bioreactor with cell recycle

Summary The production of 2,3-butanediol by Enterobacter aerogenes DSM 30053 was studied in a cell recycle system with a microfiltration module. Emphasis was put on the influence of oxygen supply, cell residence time, dilution rate, and pH. Under optimal conditions a productivity as high as 14.6 g butanediol + acetoin/l per hour was achieved with a product concentration of 54 g/l and a product yield of 88%. This productivity is three times higher than that of an ordinary continuous culture. The achievable final product concentration of a cell recycle system was limited by the accumulation of the inhibiting by-product acetic acid, which increased very rapidly at low dilution rate. To maximize product concentration a fed-batch fermentation was carried out with stepwise pH adaption at high cell density. A final product concentration of 110 g/l was obtained with a productivity of 5.4 g/l per hour and a yield of 97%.     

Effect of feeding strategy on Zymomonas mobilis CP4 fed-batch fermentations and mathematical modeling of the system

In this work, the effect of the feeding strategy in Zymomonas mobilis CP4 fed-batch fermentations on the final biomass and ethanol concentrations was studied. Highest glucose yields to biomass (0.018 g/g) and to ethanol (0.188 g/g) were obtained in fed-batch fermentations carried out using different feeding rates with a glucose concentration in the feed equal to 100 g/l. Lower values (0.0102 g biomass/g glucose and 0.085 g ethanol/g glucose) were obtained when glucose accumulated to levels higher than 60 g/l. On the other hand, the highest biomass (5 g/l) and ethanol (39 g/l) concentrations were obtained using a glucose concentration in the feed equal to 220 g/l and exponentially varied feeding rates. Experimental data were used to validate the mathematical model of the system. The prediction errors of the model are 0.39, 14.36 and 3.24 g/l for the biomass, glucose and ethanol concentrations, respectively. Due to the complex relationship for describing the specific growth rate, a fed-batch culture in which glucose concentration is constant would not optimize the process. Received: 30 November 1999 / Received revision: 24 March 2000 / Accepted: 7 April 2000     

Constant fed-batch culture of methanol-utilizing corynebacterium producing vitamin B 12

Summary A fed-batch culture of methanol-utilizing microorganism (Corynebacterium sp. XG), a vitamin B 12 producer, was carried out with constant feed of substrate. Experimental results agreed with the theorical model proposed in the literature. Using this feeding system, the final biomass and vitamin B 12 concentration reached 16.3 g/l and 880 g/l respectively after a 53 h incubation period at 30 °C.     

Fed-batch Cultivation of Mucor indicus in Dilute-acid Lignocellulosic Hydrolyzate for Ethanol Production

Mucor indicus fermented dilute-acid lignocellulosic hydrolyzates to ethanol in fed-batch cultivation with complete hexose utilization and partial uptake of xylose. The fungus was tolerant to the inhibitors present in the hydrolyzates. It grew in media containing furfural (1 g/l), hydroxymethylfurfural (1 g/l), vanillin (1 g/l), or acetic acid (7 g/l), but did not germinate directly in the hydrolyzate. However, with fed-batch methodology, after initial growth of M. indicus in 500 ml enzymatic wheat hydrolyzate, lignocellulosic hydrolyzate was fermented with feeding rates 55 and 100 ml/h. The fungus consumed more than 46% of the initial xylose, while less than half of this xylose was excreted in the form of xylitol. The ethanol yield was 0.43 g/g total consumed sugar, and reached the maximum concentration of 19.6 g ethanol/l at the end of feeding phase. Filamentous growth, which is regarded as the main obstacle to large-scale cultivation of M. indicus, was avoided in the fed-batch experiments.     

Enhanced production of ɛ-caprolactone by overexpression of NADPH-regenerating glucose 6-phosphate dehydrogenase in recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis> harboring cyclohexanone monooxygenase gene

Whole-cell conversion of cyclohexanone to ɛ-caprolactone was attempted by recombinant Escherichia coli BL21(DE3) expressing cyclohexanone monooxygenase (CHMO) of Acinetobacter calcoaceticus NCIMB 9871. High concentrations of cyclohexanone and ɛ-caprolactone reduced CHMO-mediated bioconversion of cyclohexanone to ɛ-caprolactone in the resting recombinant E. coli cells. Metabolically active cells were employed by adopting a fed-batch culture to improve the production of ɛ-caprolactone from cyclohexanone. A glucose-limited fed-batch Baeyer–Villiger oxidation where a cyclohexanone level was maintained less than 6 g/l resulted in a maximum ɛ-caprolactone concentration of 11.0 g/l. The maximum ɛ-caprolactone concentration was improved further to 15.3 g/l by coexpression of glucose-6-phosphate dehydrogenase, an NADPH-generating enzyme encoded by the zwf gene which corresponded to a 39% enhancement in ɛ-caprolactone concentration compared with the control experiment performed under the same conditions.     

Optimisation of L-lysine production byCorynebacterium sp in fed-batch cultures

Summary The influence of initial concentration of glucose from 60 to 233 g/l on the production of L-lysine byCorynebacterium sp was studied first in batch culture. The maximum conversion rate into L-lysine was obtained at 165 g/l and the best specific production rate for L-lysine was observed at 65 g/l of glucose. In fed-batch fermentations, better conversion and the specific production rates were obtained. Maintaining of a high glucose concentration in the fed-batch technique allowed a 54% increase of the L-lysine production compared to the batch culture.     

Efficient conversion of lactic acid to butanol with pH-stat continuous lactic acid and glucose feeding method by Clostridium saccharoperbutylacetonicum

In order to achieve high butanol production by Clostridium saccharoperbutylacetonicum N1-4, the effect of lactic acid on acetone–butanol–ethanol fermentation and several fed-batch cultures in which lactic acid is fed have been investigated. When a medium containing 20 g/l glucose was supplemented with 5 g/l of closely racemic lactic acid, both the concentration and yield of butanol increased; however, supplementation with more than 10 g/l lactic acid did not increase the butanol concentration. It was found that when fed a mixture of lactic acid and glucose, the final concentration of butanol produced by a fed-batch culture was greater than that produced by a batch culture. In addition, a pH-controlled fed-batch culture resulted in not only acceleration of lactic acid consumption but also a further increase in butanol production. Finally, we obtained 15.5 g/l butanol at a production rate of 1.76 g/l/h using a fed-batch culture with a pH-stat continuous lactic acid and glucose feeding method. To confirm whether lactic acid was converted to butanol by the N1-4 strain, we performed gas chromatography–mass spectroscopy (GC-MS) analysis of butanol produced by a batch culture during fermentation in a medium containing [1,2,3-¹³C₃] lactic acid as the initial substrate. The results of the GC-MS analysis confirmed the bioconversion of lactic acid to butanol.     

Enhanced 2,3-butanediol production by <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis> SDM

Enhanced 2,3-butanediol (BD) production was carried out by Klebsiella pneumoniae SDM. The nutritional requirements for BD production by K. pneumoniae SDM were optimized statistically in shake flask fermentations. Corn steep liquor powder and (NH₄)₂HPO₄ were identified as the most significant factors by the two-level Plackett–Burman design. Steepest ascent experiments were applied to approach the optimal region of the two factors and a central composite design was employed to determine their optimal levels. The optimal medium was used to perform fed-batch fermentations with K. pneumoniae SDM. BD production was then studied in a 5-l bioreactor applying different fed-batch strategies, including pulse fed batch, constant feed rate fed batch, constant residual glucose concentration fed batch, and exponential fed batch. The maximum BD concentration of 150 g/l at 38 h with a diol productivity of 4.21 g/l h was obtained by the constant residual glucose concentration feeding strategy. To the best of our knowledge, these results were new records on BD fermentation. Cuiqing Ma and Ailong Wang contributed equally to this work.     

Impact of balanced substrate flux on the metabolic process employing fuzzy logic during the cultivation of <Emphasis Type="Italic">Bacillus thuringiensis</Emphasis> var.<Emphasis Type="Italic"> Galleriae</Emphasis>

Summary The insecticidal crystal protein (ICP) synthesized at the onset of sporulation by Bacillus thuringiensis var. galleriae (Btg) is lethal against specific pests. Attempts were made to enhance the synthesis of biomass and ICP by Btg employing process optimization strategies. The process optimization was carried out with residual glucose concentration control in a bench scale bioreactor. A fuzzy logic-based feedback control system for maintaining the residual glucose concentration at a constant level during cultivation was developed in LabVIEW. This control system indicated the possibilities in providing a balanced substrate flux during cultivation. The identified optimum level of 2.72 g/l in residual glucose concentration was maintained by fed-batch cultivation with glucose and yeast extract fed at equal concentration with the above control system. High cell density of 16.0 g/l with specific growth rate of 0.69 h^-1 was obtained during the cultivation. The balanced flux of substrate during cultivation has resulted in the enhanced synthesis of biomass and ICP. This optimized process could be commercially exploited by comparing the fluxes of basal compounds in different media sources used in fermentation.     

Microbial fed-batch production of 1,3-propanediol by Klebsiella pneumoniae under micro-aerobic conditions

The microbial production of 1,3-propanediol (1,3-PD) by Klebsiella pneumoniae under micro-aerobic conditions was investigated in this study. The experimental results of batch fermentation showed that the final concentration and yield of 1,3-PD on glycerol under micro-aerobic conditions approached values achieved under anaerobic conditions. However, less ethanol was produced under microaerobic than anaerobic conditions at the end of fermentation. The batch micro-aerobic fermentation time was markedly shorter than that of anaerobic fermentation. This led to an increment of productivity of 1,3-PD. For instance, the concentration, molar yield, and productivity of 1,3-PD of batch micro-aerobic fermentation by K. pneumoniae DSM 2026 were 17.65 g/l, 56.13%, and 2.94 g l^–1 h^–1, respectively, with a fermentation time of 6 h and an initial glycerol concentration of 40 g/l. Compared with DSM 2026, the microbial growth of K. pneumoniae AS 1.1736 was slow and the concentration of 1,3-PD was low under the same conditions. Furthermore, the microbial growth in fed-batch fermentation by K. pneumoniae DSM 2026 was faster under micro-aerobic than anaerobic conditions. The concentration, molar yield, and productivity of 1,3-PD in fed-batch fermentation under micro-aerobic conditions were 59.50 g/l, 51.75%, and 1.57 g l^–1 h^–1, respectively. The volumetric productivity of 1,3-PD under microaerobic conditions was almost twice that of anaerobic fed-batch fermentation, at 1.57 and 0.80 g l^–1 h^–1, respectively.     

High production of 1,3-propanediol from glycerol by Clostridium butyricum VPI 3266 in a simply controlled fed-batch system

Summary A simple fed-batch system which controls substrate feeding by measuring the CO₂ produced during the fermentation, was developped. This Fed-batch approach allowed high production of 1,3-propanediol from glycerol by Clostridium butyricum by avoiding substrate inhibition phenomena. 65 g/l of 1,3-propanediol was produced with a productivity of 1.21 g/l.h and a yield of 0.56. The concentration of 1,3-propanediol obtained and the productivity were significantly higher than those reached in batch culture.     

High production of Poly-β-hydroxybutyrate (PHB) from Methylobacterium organophilum under potassium limitation

Summary Mass production of Poly(-hydroxybutyrate) (PHB) from Methylobacterium organophilum under potassium-limited condition was carried out using a microcomputeraided automatic fed-batch culture system. The concentration of methanol was kept within the range of 2 – 3 g/l which did not show any inhibitory effect on cell growth. The PHB accumulation was stimulated when potassium concentration in the culture broth fell below 25 mg/l. After 70 hours of cultivation, the concentrations of cell mass and PHB were obtained to be 250 g/l and 130 g/l, respectively, which corresponded to a volumetric productivity of 1.8 – 2.0 g-PHB/1-hr. PHB contents ranged from 52% to 56% of dry cell weight with a yield factor (Y_P/S) of 0.19 g-PHB/g-methanol.     

Intra- and extra-cellular organophosphorus hydrolase production with recombinant <Emphasis Type="Italic">E. coli</Emphasis> using fed-batch fermentation

A fed-batch fermentation process for the production of organophosphorus hydrolase (OPH) (EC 3.1.8.1) by E. coli pET812 was developed in this research. With batch fermentation, the maximum OPH concentrations attained by batch fermentation were as low as 4 × 10⁵ U/l because cell growth and OPH production were inhibited by a high initial concentration of glucose. To develop a fed-batch fermentation process for obtaining higher concentrations of OPH, highly concentrated glucose solution (500 g/l) was added intermittently or continuously to increase the carbon source concentration. Eventually, 3.2 × 10⁶ U/l of OPH was produced with fed-batch fermentation in 24 h. This was eight times higher than the yield with conventional batch fermentation. A total concentration of 399–441 mg of OPH was produced/l, which was four times higher than that reported when using E. coli. Nearly half (44%) of the produced OPH was secreted into the culture solution.     

Production of a high concentration acetic acid by Acetobacter aceti using a repeated fed-batch culture with cell recycling

Summary The acetic acid concentration in a batch culture of Acetobacter aceti M23 increased up to 90 g/l by adding ethanol intermittently. Although the bacterial cells ceased growth at about 60 g acetic acid/l, non-viable cells still preserved ethanol oxidation activity. Cell recycling by filtration in a repeated fed-batch culture increased the overall acetic acid production rate 2.84-fold compared to that without cell recycling for the purpose of obtaining an acetic acid concentration of 80.8 g/l. Repeated fed-batch cultivation with cell recycle was effective for increasing the production rate of acetic acid and obtaining high amounts close to a lethal concentration (90 g/l).Offprint requests to: Kiyoshi Toda     

Multi-copy expression and fed-batch production of Rhodotorula araucariae epoxide hydrolase in Yarrowia lipolytica

Epoxide hydrolases (EHs) of fungal origin have the ability to catalyze the enantioselective hydrolysis of epoxides to their corresponding diols. However, wild type fungal EHs are limited in substrate range and enantioselectivity. Additionally, the production of fungal epoxide hydrolase (EH) by wild-type strains is typically very low. In the present study, the EH-encoding gene from Rhodotorula araucariae was functionally expressed in Yarrowia lipolytica, under the control of a growth phase inducible hp4d promoter, in a multi-copy expression cassette. The transformation experiments yielded a positive transformant, with a final EH activity of 220 U/g dw in shake-flask cultures. Evaluation of this transformant in batch fermentations resulted in ~ 7-fold improvement in EH activity over the flask scale. Different constant specific feed rates were tested in fed-batch fermentations, resulting in an EH activity of 1,750 U/g dw at a specific feed rate of ~ 0.1 g/g/h, in comparison to enzyme production levels of 0.3 U/g dw for the wild type R. araucariae and 52 U/g dw for an Escherichia coli recombinant strain expressing the same gene. The expression of EH in Y. lipolytica using a multi-copy cassette demonstrates potential for commercial application.     

Butyric acid production from brown algae using <Emphasis Type="Italic">Clostridium tyrobutyricum</Emphasis> ATCC 25755

Butyric acid fermentation by Clostridium tyrobutyricum ATCC 25755 using glucose or brown algae as a carbon source was carried out. Initially, different fermentation modes (batch, fed-batch, and semi-continuous) at pH 6 and 37°C were compared using a model medium containing glucose as a carbon source. By feeding the whole medium containing 40 ∼ 50 and 30 g/L of glucose into the fed-batch and semi-continuous fermentations, very similar butyrate yields (0.274 and 0.252 g butyrate/g glucose, respectively) and productivities (0.362 and 0.355 g/L/h, respectively) were achieved. The highest butyrate concentration was about 50 g/L, which was observed in the fed-batch fermentation with whole medium feeding. However, semi-continuous fermentation sustained a longer fermentation cycle than the fed-batch fermentation due to end-product and metabolic waste inhibition. The established conditions were then applied to the fermentation using brown algae, Laminaria japonica and Undaria pinnatifida, as substrates for butyric acid fermentation. To hydrolyze brown algae, 7.5 ∼ 10% (w/v) dried brown algae powder was suspended in 1% (w/v) NaOH or 0.5 ∼ 2.5% (w/v) H₂SO₄ and then autoclaved at 121°C for 30 ∼ 90 min. The resulting butyrate concentration was about 11 g/L, which was produced from 100 g/L of L. japonica autoclaved for 60 min in 1.5% H₂SO₄ acid solution.     

Model-based control of feed rate and illuminance in a photosynthetic fed-batch reactor for H2S removal

Traditional application of computer to fermentation processes has focused on the measurement and control of parameters such as temperature, pH, vessel pressure, sparge rate, dissolved oxygen, substrate concentration, and product concentration. In a fed-batch reactor with the photosynthetic green sulfur bacterium Chlorobium thiosulfatophilum which converts hydrogen sulfide to elementary sulfur or sulfate, separate measurement of cell mass concentration and sulfur particle concentration turbidimetrically was difficult due to their combined contributions to the total turbidity. Instead of on-line measurement of many process variables, a model-based control of feed rate and illuminance was designed. Optimal operation condition relating feed rate vs. light intensity was obtained to suppress the accumulation of sulfate and sulfide, and to save light energy in a 4-1 photosynthetic fed-batch reactor. This relation was correlated with the inreasing cell mass concentration. A model which describes the cell growth by considering the light attenuation effects due to scattering and absorption, and to crowding effect of the cells, was established beforehand with the results from the experiments. Based on these optimal operating conditions and the cell growth model, automatic controls of feed rate and illuminance were carried out alternatively to the traditional application of computer to fermentation with on-line measurement, realtime response and adjustment of process variables.List of Symbols F ml/min Flow rate of gas mixture - hV lux Average illuminance - Q mmol/(l h) Removal rate of hydrogen sulfide - X mg protein/l Cell mass concentration as protein - X ₀ mg protein/l Initial cell mass concentration - X _m mg protein/l Maximum cell mass concentration - _a h^–1 Apparent specific growth rate     

Coenzyme Q<Subscript>10</Subscript> production by <Emphasis Type="Italic">Rhodobacter sphaeroides</Emphasis> in stirred tank and in airlift bioreactor

A higher Coenzyme Q₁₀ (CoQ₁₀) concentration of 25.04 mg/l was found in airlift bioreactor than the value of 18.11 mg/l obtained in stirred tank under the aerobic-dark cultivation of Rhodobacter sphaeroides. Aeration rate didn’t show obvious impact to CoQ₁₀ production in airlift bioreactor. The fed-batch operation in airlift bioreactor could increase the biomass concentration and led to the maximum CoQ₁₀ concentration of 33.91 mg/l measured, but a lower CoQ₁₀ cell content (3.5 mg CoQ₁₀/DCW) was observed in the fed-batch operation as compared to the batch operation. To enhance the CoQ₁₀ content, an aeration-change strategy was proposed in the fed-batch operation of airlift bioreactor. This strategy led to the maximum CoQ₁₀ concentration of 45.65 mg/l, a 35% increase as compared to the simple fed-batch operation. The results of this study suggested that a fed-batch operation in airlift bioreactor accompanying aeration-change could be suitable for CoQ₁₀ production.     

Repeated pH-stat fed-batch fermentation for rhamnolipid production with indigenous Pseudomonas aeruginosa S2

Rhamnolipid is one of the most commonly used biosurfactants with the ability to reduce the surface tension of water from 72 to 30 mN/m. An indigenous isolate Pseudomonas aeruginosa S2 possessing excellent ability to produce rhamnolipid was used as a model strain to explore fermentation technology for rhamnolipid production. Using optimal medium and operating conditions (37°C, pH 6.8, and 250 rpm agitation) obtained from batch fermentation, P. aeruginosa S2 was able to produce up to 5.31 g/l of rhamnolipid from glucose-based medium. To further improve the rhamnolipid yield, a pH-stat fed-batch culture was performed by maintaining a constant pH of 6.8 through manipulating glucose feeding. The effect of influent glucose concentration on rhamnolipid yield and productivity was investigated. Using the pH-stat culture, a maximum rhamnolipid concentration (6.06 g/l) and production rate (172.5 ml/h/l) was obtained with 6% glucose in the feed. Moreover, combining pH-stat culture with fill-and-draw operation allowed a stable repeated fed-batch operation for approximately 500 h. A marked increase in rhamnolipid production was achieved, leading to the best rhamnolipid yield of approximately 9.4 g/l during the second repeated run.