Pancreatic serine protease extraction by affinity partition using a free triazine dye

Affinity partitioning combines the partitioning behavior of biological macromolecules in aqueous two-phase systems with the principle of biorecognition. Among the numerous substances that have been evaluated as ligands, the reactive dyes constitute a group of low cost textile dyes which have proved to act as biomimetic ligands for many enzymes. The ability of reactive yellow 2 (RY2) to interact with trypsin (TRP) and chymotrypsin (ChTRP) and its behavior in aqueous two-phase systems formed by polyethylene glycol (PEG) and sodium citrate (NaCit) - were investigated. Different variables such as PEG molecular weight, tie line length and dye concentration were analyzed. RY2 showed to bind specifically to both TRP and ChTRP with affinity constants near to 10(3)M(-1). Its partition equilibrium is practically displaced to the top phase in systems formed by PEG of different molecular weight. Addition of this dye to PEG 8000/NaCit systems until a final concentration of 0.196% (w/w) induced an increase in TRP and ChTRP partition coefficients of at least 2 times over that in the absence of the ligand. These findings demonstrate that RY2 fulfils all the requirements to be considered as an affinity ligand in aqueous two-phase partitioning of TRP and ChTRP.     

Protein separation using metal ion-bound particles in aqueous two-phase system

Metal ion affinity partitioning of protein in aqueous two-phase systems was studied using Sepharose as ligand carrier as an integrated adsorption partitioning. Cu(II)-bound Sepharose was mixed with protein solution and an aqueous two-phase system. The affinity sorbent was distributed quantitatively to the upper side or the interface. The binding studies of lysozyme to copper-bound gel in PEG/dextran two-phase systems demonstrate the feasibility of this bioseparation process. PEG/dextran system did not affect binding and elution of lysozyme to and from the Cu(II)-Sepharose particles.     

Protein sorption and recovery by hydrogels using principles of aqueous two-phase extraction

Use of the thermodynamic principles of aqueous two-phase extraction (ATPE) to drive protein into a crosslinked gel is developed as a protein isolation and separation technique, and as a protein loading technique for drug delivery applications. A PEG/dextran gel system was chosen as a model system because PEG/dextran systems are widely used in aqueous two-phase extraction and dextran gels (Sephadex(R)) are common chromatographic media. The effects of polymer concentrations and molecular weights, salts, and pH on the partitioning of ovalbumin matched ATPE heuristics and data trends. Gel partition coefficients (Cgel/Csolution) increased with increasing PEG molecular weight and concentration and decreasing dextran concentration (increased gel swelling). The addition of PEG to the buffer solution yielded partition coefficients more than an order of magnitude greater than those obtained in systems with buffer alone, or added salt. A combined salt/PEG system yielded an additional order of magnitude increase. For example, when ovalbumin solution (2.3 mg/mL) was equilibrated with Sephadex(R) G-50 at pH 6.75, the partition coefficients were 0.13 in buffer, 0.11 in buffer with 0.22M KI, 2.3 in 12 wt% PEG-10,000 and 32.0 in 12 wt% PEG-10, 000 with 0.22M KI. The effect of anions and cations as well as ionic strength and pH on the partitioning of ovalbumin also matched ATPE heuristics. Using the heuristics established above, partition coefficients as high as 80 for bovine serum albumin and protein recoveries over 90% were achieved. In addition, the wide range of partition coefficients that were obtained for different proteins suggests the potential of the technique for separating proteins. Also, ovalbumin sorption capacities in dextran were as high as 450 mg/g dry polymer, and the sorption isotherms were linear over a broad protein concentration range.     

Determinants of liposome partitioning in aqueous two-phase systems: Evaluation by means of a factorial design

This article evaluates the influence of five parameters on liposome partitioning in aqueous two-phase systems (ATPSs), composed of poly(ethyleneglycol) (PEG)/dextran (Dx), using the factorial experimental design together with a multiple regression. Mathematical models to quantify the influence of these parameters, individually and/or jointly, on liposome partitioning in ATPS were developed. The models were statistically tested and verified by experimentation. This approach was then used to define the conditions for the preferential accumulation of liposomes in the top PEG-rich phase. The models predicted a significant effect of liposome surface charge, PEG molecular weight, phase-forming polymer concentration, and phosphate ion concentration on the partition behavior of liposomes. For negatively charged liposomes, it was found that the smaller the molecular weight of PEG and polymer concentration and the larger the phosphate ion concentration, the greater the partition coefficient of the liposomes. No significant effect of pH, at the range of 6-8, on liposome partitioning was noted. This approach has led to the development of an optimal two-phase system where 90% of negatively charged liposomes accumulated in the PEG phase. In addition to the general scientific value of this research, it has a technological importance as ATPSs may be useful for removing the unentrapped drug from liposomes during their preparation for pharmaceutical applications. (c) 1996 John Wiley & Sons, Inc.     

PEG/NaPA aqueous two-phase systems for the purification of proteases expressed by Penicillium restrictum from Brazilian Savanna

The partitioning of proteases expressed by Penicillium restrictum from Brazilian Savanna in an inexpensive aqueous two-phase system composed of poly (ethylene glycol) (PEG) and sodium polyacrylate (NaPA) was studied. The effects of PEG molecular weight and concentration, as well as NaPA concentration and the concentration of fermented broth on protease partitioning were studied. Partitioning into the top PEG-rich phase was increased in systems with smaller PEG-molecular weight, higher NaPA concentration and lower PEG concentration. For most systems studied, purification has been achieved by directing the biomolecule partition to the opposite phase of the other proteins, providing the enzyme purification. The highest partition coefficient was obtained using 20 wt% NaPA, 4 wt% PEG 2000 g mol⁻¹ and 45 wt% fermented broth, leading to a purification factor of 1.98 and partition coefficient of 37.73. The system showed high mass balances and yield, indicating enzyme stability and applicability for industrial processes. The partitioning results using the PEG/NaPA/NaCl system show that this method could be used to purify or concentrate protease from fermented broth.     

Thermodynamic study of forces involved in bovine serum albumin and ovalbumin partitioning in aqueous two-phase systems

The partitioning of bovine serum albumin and ovalbumin in different two-phase aqueous polymer systems is investigated using a thermodynamic approach. Systems used were polyethylene glycols (PEGs) of molecular weights 1000 to 10,000 Da and Dextran T500 (500,000 Da). Ovalbumin transfer to the top phase is exothermic, which suggests an electrostatic interaction between the hydroxyl groups of PEG and the hydrophilic side chain of the protein, whereas the bovine serum albumin partition is an endothermic process that is entropically driven, which coincides with its high surface hydrophobicity. The effect of PEG molecular weight on enthalpy and heat capacity changes, associated with the partition of both proteins, is examined on the basis of a preferential interaction of low-molecular-weight PEG with the protein surface.     

Role of polymer–protein interaction on partitioning pattern of bovine pancreatic trypsinogen and alpha-chymotrypsinogen in polyethyleneglycol/sodium tartrate aqueous two-phase systems

The partitioning pattern of bovine trypsinogen (TRPz) and alpha-chymotrypsinogen (ChTRPz) was investigated in a low impact aqueous two-phase system formed by polyethyleneglycol (PEG) and sodium tartrate (NaTart) pH 5.00. ChTRPz exhibited higher partition coefficients than TRPz did in all the assayed systems. The decrease in PEG molecular weight and the increase in tie line length were observed to displace the partitioning equilibrium of both proteins to the top phase, while phase volume ratios in the range 0.5–1.5 showed not to affect protein partitioning behaviour. Systems formed by PEG of molecular weight 600 with composition corresponding to a high tie line length (PEG 12.93%, w/w and NaTart 21.20%, w/w) are able to recover most of both zymogens in the polymer-enriched phase. A crucial role of PEG–protein interaction in the partitioning mechanism was evidenced by isothermal calorimetric titrations. The major content of highly exposed tryptophan rests, present in ChTRPz molecule, could be considered to be determinant of its higher partition coefficient due to a selective charge transfer interaction with PEG molecule. A satisfactory correlation between partition coefficient and protein surface hydrophobicity was observed in systems formed with PEGs of molecular weight above 4000, this finding being relevant in the design of an extraction process employing aqueous two-phase systems.     

Mechanisms of phase behaviour and protein partitioning in detergent/polymer aqueous two-phase systems for purification of integral membrane proteins

Detergent/polymer aqueous two-phase systems are studied as a fast, mild and efficient general separation method for isolation of labile integral membrane proteins. Mechanisms for phase behaviour and protein partitioning of both membrane-bound and hydrophilic proteins have been examined in a large number of detergent/polymer aqueous two-phase systems. Non-ionic detergents such as the Triton series (polyoxyethylene alkyl phenols), alkyl polyoxyethylene ethers (C(m)EO(n)), Tween series (polyoxyethylene sorbitol esters) and alkylglucosides form aqueous two-phase systems in mixtures with hydrophilic polymers, such as PEG or dextran, at low and moderate temperatures. Phase diagrams for these mixtures are shown and phase behaviour is discussed from a thermodynamic model. Membrane proteins, such as bacteriorhodopsin and cholesterol oxidase, were partitioned strongly to the micelle phase, while hydrophilic proteins, BSA and lysozyme, were partitioned to the polymer phase. The partitioning of membrane protein is mainly determined by non-specific hydrophobic interactions between detergent and membrane protein. An increased partitioning of membrane proteins to the micelle phase was found with an increased detergent concentration difference between the phases, lower polymer molecular weight and increased micelle size. Partitioning of hydrophilic proteins is mainly related to excluded volume effects, i.e. increased phase component size made the hydrophilic proteins partition more to the opposite phase. Addition of ionic detergent to the system changed the partitioning of membrane proteins slightly, but had a strong effect on hydrophilic proteins, and can be used for enhanced separation between hydrophilic proteins and membrane protein.     

Yeast RNA partition accompanying adsorption in salt/PEG two-phase system

Summary Partitioning of yeast total RNA in a salt/PEG two-phase system, i.e., a potassium phosphate/PEG system and a ammonium sulfate/PEG system, was characterized with regard to the dependence on the molecular weights of PEG and RNA. The shift in RNA partitioning was investigated for a PEG molecular weight range from 300 to 20000. RNA was partitioned mainly to the top phase in the system with PEG of a molecular weight up to 1000, mainly at the interface or almost equally to both phases in the system with PEG of a molecular weight 1000–2000, and mainly to the bottom phase in the system with PEG of more than 2000 in a molecular weight . The effect of PEG molecular weight on partitioning of low molecular weight RNA, less than 5.8S molecule, was qualitatively similar to that of high molecular weight RNA, more than 17S molecule. However, partitioning of high molecular weight RNA was more one-sided than that of low molecular weight RNA. In the system with PEG1000–2000, remarkable adsorption of high molecular weight RNA at the interface was investigated; more than 90% of the high molecular weight RNA added was concentrated. Adsorption of RNA at the interface was quantitatively demonstrated as a novel example of adsorption of a soluble macromolecule in an aqueous two-phase system.     

Partitioning of caseinomacropeptide in aqueous two-phase systems

This study evaluates the influence of type of salt and temperature on the partition coefficient of caseinomacropetide (CMP) to determine the best conditions for the recovery of CMP in aqueous two-phase systems (ATPS) composed by poly(ethylene glycol) (PEG) 1500 and an inorganic salt (potassium phosphate, sodium citrate, lithium sulfate or sodium sulfate). In all systems, CMP presented affinity for the PEG-rich phase. The PEG1500+lithium sulfate showed the highest values of partitioning coefficient. In addition, thermodynamic parameters (DeltaH degrees , DeltaS degrees , DeltaG degrees) as a function of temperature, were calculated for the system PEG1500-sodium citrate at different PEG concentrations and the results imply thermodynamic differences between partitioning of CMP in this system.     

Purification of lipase produced by a new source of Bacillus in submerged fermentation using an aqueous two-phase system

This work discusses the application of an aqueous two-phase system for the purification of lipases produced by Bacillus sp. ITP-001 using polyethylene glycol (PEG) and potassium phosphate. In the first step, the protein content was precipitated with ammonium sulphate (80% saturation). The enzyme remained in the aqueous solution and was dialyzed against ultra-pure water for 18 h and used to prepare an aqueous two-phase system (PEG/potassium phosphate). The use of different molecular weights of PEG to purify the lipase was investigated; the best purification factor (PF) was obtained using PEG 20,000g/mol, however PEG 8000 was used in the next tests due to lower viscosity. The influence of PEG and potassium phosphate concentrations on the enzyme purification was then studied: the highest FP was obtained with 20% of PEG and 18% of potassium phosphate. NaCl was added to increase the hydrophobicity between the phases, and also increased the purification factor. The pH value and temperature affected the enzyme partitioning, with the best purifying conditions achieved at pH 6.0 and 4°C. The molecular mass of the purified enzyme was determined to be approximately 54 kDa by SDS-PAGE. According to the results the best combination for purifying the enzyme is PEG 8000g/mol and potassium phosphate (20/18%) with 6% of NaCl at pH 6.0 and 4°C (201.53 fold). The partitioning process of lipase is governed by the entropy contribution.     

Novel approach towards recovery of glycosaminoglycans from tannery wastewater

Poly ethylene glycol (PEG)-poly acrylic acid (PAA) based aqueous two-phase system (ATPS) was selected as a practical model to recover glycosaminoglycans (GAGs) from tannery wastewater. The influence of PEG molecular weight, tie line length (TLL), pH, temperature and NaCl concentration on the partition coefficient of glycosaminoglycans from tannery wastewater was studied. Partition coefficient of glycosaminoglycan decreases on increase of PEG molecular weight, NaCl concentration and temperature, whereas it increases with increase of pH. In the PEG-rich phase, increased partitioning of GAGs was observed with increase in TLL. The partitioning of GAGs was better in PEG 4000 at pH 8.0, 20 °C with a yield of 91.50%. This study demonstrates the potential application of ATPS processes for the recovery of GAGs from complex biological suspensions.     

Hybridization-based affinity partitioning of nucleic acids using PEG-coupled oligonucleotides.

Polyethylene glycol (PEG)-coupled oligonucleotides are partitioned in an aqueous two-phase system PEG/dextran. The affinity of the oligonucleotide for the PEG-rich phase increases proportionally to the length of the coupled PEG polymer. After hybridization, the PEG-coupled oligonucleotide is able to force a complementary nucleic acid strand into the PEG-rich phase. This property can be used for the sequence-specific isolation of nucleic acids through hybridization-based affinity partitioning. The dependence of the partition coefficient in this system on various parameters is described. The application of this principle to multistage chromatographic separations is demonstrated.     

Recovery of endo-polygalacturonase using polyethylene glycol-salt aqueous two-phase extraction with polymer recycling

The partitioning behaviour of endo-polygalacturonase (endo-PG) and total protein from a clarified Kluyveromyces marxianus fermentation broth in polyethylene glycol (PEG)-ammonium sulfate and PEG-potassium phosphate (pH=7) aqueous two-phase systems was experimentally investigated. Both the enzyme and total protein partitioned in the bottom phase for these two kinds of systems. The enzyme partitioning coefficient can be lower than 0.01 in PEG8000-(NH₄)₂SO₄ ATPS with a large phase volume ratio and a moderate tie-line length, which implies the possibility of concentration operation using aqueous two phase partitioning. An ion-exchange separation of high purification efficiency was applied to analyze the clarified and dialyzed fermentation broth. A total purification factor of only 2.3 was obtained, which indicated the high enzyme protein content in the total protein of the fermentation broth. Consequently, the main purpose for separating endo-PG is concentration rather than purification. A separation scheme using an aqueous two-phase extraction process with polymer recycling and a dialysis was proposed to recover endo-PG from the fermentation supernatant of K. marxianus for commercial purpose. A high enzyme recovery up to 95% and a concentration factor of 5 to 8 with a purification factor of about 1.25 were obtained using the single aqueous two-phase extraction process. More than 95% polymer recycled will not affect the enzyme recovery and purification factor. Dialysis was used mainly to remove salts in the bottom phase. The dialysis step has no enzyme loss and can further remove small bulk proteins. The total purification factor for the scheme is about 1.7.     

Influence of system and molecular parameters upon fractionation of intracellular proteins from Saccharomyces by aqueous two-phase partition.

The interaction of molecular characteristics of proteins with the physicochemical properties of PEG-phosphate aqueous two-phase systems has been studied. This has involved characterization of protein molecular weight, charge, and hydrophobicity and study of PEG molecular weight and concentration, phosphate concentration, and pH. System characterization has been conducted in the context of limited stage fractionation procedures for protein recovery from baker's yeast. Results are presented which show that the degree of purification achieved is dependent on macromolecular surface properties rather than system operating conditions. A simple conceptual model of partitioning in PEG-phosphate aqueous two-phase systems is presented which is applicable in the rational design of fractionation procedures and serves to limit the amount of empirical experimentation necessary for the establishment of practical operations.     

Isolation of plasmid DNA from cell lysates by aqueous two-phase systems

This work presents a study of the partitioning of a plasmid vector containing the cystic fibrosis gene in polyethylene glycol (PEG)/salt (K2HPO4) aqueous two-phase systems (ATPS). The plasmid was extracted from neutralized alkaline lysates using PEG with molecular weights varying from 200 to 8000. The effects of the lysate mass loaded to the ATPS (20, 40, and 60% w/w) and of the plasmid concentration in the lysate were evaluated. The performance of the process was determined by qualitative and quantitative assays, carefully established to overcome the strong interference of impurities (protein, genomic DNA, RNA), salt, and PEG. Plasmid DNA partitioned to the top phase when PEG molecular weight was lower than 400. The bottom phase was preferred when higher PEG molecular weights were used. Aqueous two-phase systems with PEG 300, 600, and 1000 were chosen for further studies on the basis of plasmid and RNA agarose gel analysis and protein quantitation. The recovery yields were found to be proportional to the plasmid concentration in the lysate. The best yields (>67%) were obtained with PEG 1000. These systems (with 40 and 60% w/w of lysate load) were able to separate the plasmid from proteins and genomic DNA, but copartitioning of RNA with the plasmid was observed. Aqueous two-phase systems with PEG 300 concentrated both plasmid and proteins in the top phase. The best system for plasmid purification used PEG 600 with a 40% (w/w) lysate load. In this system, RNA was found mostly in the interphase, proteins were not detected in the plasmid bottom phase and genomic DNA was reduced 7.5-fold.     

Affinity extraction of lactate dehydrogenase by aqueous two-phase systems using free triazine dyes

Affinity partitioning of lactate dehydrogenase (LDH) was studied in polyethylene glycol (PEG) /salt and PEG / hydroxypropyl starch (PES) aqueous two-phase systems, using free triazine dyes as their affinity ligands. The free dyes showed one-sided partition to the top PEG-rich phase and thus enhanced the affinity partitioning effect in the systems. A two-step affinity extraction process has been discussed for large scale purification of LDH from rabbit muscle.Hu Lin is one of the cooperator of the experiment.     

Aqueous two-phase systems containing urea: influence on phase separation and stabilization of protein conformation by phase components.

During recombinant Escherichia coli fermentation with high expression levels, inclusion bodies are often formed. Aqueous two-phase systems have been used in the presence of urea for the initial recovery steps. To investigate phase behavior of such systems we determined phase diagrams of poly(ethylene glycol) (PEG)/sodium sulfate/urea/water and PEG/dextran T-500 (DEX)/urea/phosphate buffer/water at different concentrations of urea and different molecular weight of PEG. PEG/Na2SO4 aqueous two-phase systems could be obtained including up to 30% w/w urea at 25 degrees C and PEG/dextran T-500 up to 35% w/w urea. The binodial was displaced toward higher concentrations with increasing urea concentrations. The partition coefficient of urea was near unity. An unstable mutant of T4-lysozyme with an amino acid replacement in the core (V149T) was used to analyze the effect of phase components on the conformation of the enzyme. We showed that partitioning of tryptophan was not dependent on the concentration of urea in the phase system.     

Partitioning features of bovine trypsin and alpha-chymotrypsin in polyethyleneglycol-sodium citrate aqueous two-phase systems

The partitioning of bovine trypsin and alpha-chymotrypsin--proteases of similar physico-chemical properties--in different polyethyleneglycol/sodium citrate aqueous two-phase systems was investigated. The effect of different factors such as polyethyleneglycol molecular weight, pH, tie line length, temperature and the presence of an inorganic salt on the protein partition coefficient were analysed. Both a decrease in PEG molecular weight and an increase in pH led to a higher partition coefficient for both enzymes. Aqueous two-phase systems formed by PEG of molecular weight 3350 and citrate pH 5.2 showed the best separation capability which was enhanced in presence of sodium chloride 3%. The transfer of both proteins to the top phase was associated with negative enthalpic and entropic changes.     

Fundamental studies of biomolecule partitioning in aqueous two-phase systems

Phase diagram data at 4 degrees C was determined for the aqueous two-phase systems composed of polyethylene glycol, dextran, and water. The Flory-Huggins theory of polymer thermodynamics was used to correlate partitioning of biomolecules in these aqueous two-phase systems resulting in a simple linear relationship between the natural logarithm of the partition coefficient and the concentration of polymers in the two phases. This relationship was verified by partitioning a series of dipeptides which differ from one another by the addition of a CH(2) group on the c-terminal amino acid residue and by utilizing a set of low-molecular-weight proteins. The slope of the line could be expressed in terms of the interactions of the biomolecule with the phase forming polymers and water. The main result for the dipeptides was that knowledge of the partition coefficient in any of the PEG/dextran/water systems, regardless of polymer molecular weight, enabled prediction of the coefficient in all of the systems. The dipeptides were also used for determination of the Gibbs free energy of transfer of a CH(2) group between the phases. This quantity was correlated with polymer concentration, thus establishing a hydrophobicity profile for the PEG/ dextran/water systems. The methodology for predicting dipeptide partition coefficients was extended to proteins, where it was found that low-molecular-weight proteins gave a linear relationship with the tie line compositions of a phase diagram.