Viscometric and static light scattering studies on an exopolysaccharide produced by Lactobacillus delbrueckii subspecies bulgaricus NCFB 2483

The rheological properties and molecular parameters of a purified exopolysaccharide (EPS) produced by a ropy strain of Lactobacillus delbrueckii subsp. bulgaricus NCFB 2483 were investigated. Using capillary viscometry, an intrinsic viscosity of 2,013 mL/g was obtained. The flow curves were fitted by both the Carreau and the Cross equations for shear-thinning fluids, with the Carreau equation giving a better fit. The Cross equation fitted fairly well the plot of reduced viscosity as a function of reduced shear rate with an exponent value (1 - n) of approximately 0.76, typical of random coil polymers. Furthermore, the concentration dependence of the viscosity plot showed a gradient of approximately 1.1 in the dilute regime and 3.3 in the semidilute regime. Molecular parameters were obtained using a multiangle laser light scattering technique. The 2483 EPS molecules had a weight-average molar mass of approximately 2 x 10(6) Da and a z-average root mean square radius (RMS) of approximately 151 nm. From the light scattering data, the bacterial EPS was also found to have a low polydispersity index (approximately 1.15) and adopt a random coil conformation.     

Factors affecting exocellular polysaccharide production by Lactobacillus delbrueckii subsp. bulgaricus grown in a chemically defined medium

We developed a chemically defined medium (CDM) containing lactose or glucose as the carbon source that supports growth and exopolysaccharide (EPS) production of two strains of Lactobacillus delbrueckii subsp. bulgaricus. The factors found to affect EPS production in this medium were oxygen, pH, temperature, and medium constituents, such as orotic acid and the carbon source. EPS production was greatest during the stationary phase. Composition analysis of EPS isolated at different growth phases and produced under different fermentation conditions (varying carbon source or pH) revealed that the component sugars were the same. The EPS from strain L. delbrueckii subsp. bulgaricus CNRZ 1187 contained galactose and glucose, and that of strain L. delbrueckii subsp. bulgaricus CNRZ 416 contained galactose, glucose, and rhamnose. However, the relative proportions of the individual monosaccharides differed, suggesting that repeating unit structures can vary according to specific medium alterations. Under pH-controlled fermentation conditions, L. delbrueckii subsp. bulgaricus strains produced as much EPS in the CDM as in milk. Furthermore, the relative proportions of individual monosaccharides of EPS produced in pH-controlled CDM or in milk were very similar. The CDM we developed may be a useful model and an alternative to milk in studies of EPS production.     

Partial characterization of extracellular polysaccharides from cyanobacteria

Four cyanobacterial strains, Cyanothece sp., Oscillatoria sp., Nostoc sp. and Nostoc carneum were studied for physico-chemical characterization of extracellular polysaccharide (EPS) secreted during the controlled growth condition. Hydrolyzed EPSs showed the compositional involvement of four sugar moieties viz. mannose, glucose, xylose and ribose in varying combinations. Infrared spectra of EPSs showed a specific absorbance of O-H stretching at 3448-3400 cm(-1), asymmetrical-symmetrical C-H stretching at 2924 and 2854 cm(-1) and a bending vibration of C-H at 1400-1380 cm(-1). Absorbance at 1259 and 1140 cm(-1) with Cyanothece sp. EPS, indicated the presence of sulfur containing functional group. Thermal gravimetric analysis and differential scanning calorimetric analysis confirmed the polysaccharides thermal stability as high as around 250 degrees C. In the presence of 0.1 M NaCl aqueous solution, the intrinsic viscosity of polysaccharides from Oscillatoria sp. and Nostoc sp. decreased 1.6 fold, whereas, 3-5 fold reduction in intrinsic viscosity was observed with commercially available guar and xanthan gum.     

Deoxyribonuclease activities in Lactobacillus delbrueckii

DNase activity was examined in the extracellular and subcellular fractions of six non-transformable strains belonging to Lactobacillus delbrueckii subsp. lactis (L. lactis) and Lactobacillus delbrueckii subsp. bulgaricus (L. bulgaricus) and compared with the activity present in Lactobacillus johnsonii NCK 65, a transformable strain of Lactobacillus. In the extracellular fraction of the L. delbrueckii strains, a common protein band of 36 kDa was detected, while a band of 29 kDa was found in the same fraction of L. johnsonii. No nuclease activity was detected in the cytoplasmic fraction of this strain, indicating that the localization of the DNase activity could be a key factor in the uptake of foreign DNA.     

Calmodulin antagonists inhibit germination of Bacillus cereus T spores

M. RACINE, J. DUMONT, C.P. CHAMPAGNE AND A. MORIN. 1991. The effects of lactose, ammonium and phosphate on the production of extracellular polysaccharide from Propionibacterium acidi-propionici VM-25 were studied in whey-based media. The polysaccharide was composed of a water-soluble fraction (15% w/w), a water-insoluble fraction (27% w/w) and ca 65% (w/w) of ash. Up to 15 g/l of polysaccharide was produced during growth on partially deproteinated whey, supplemented with lactose, NH₄ Cl and KH₂ PO₄, after incubation at pH 7.0 and 25.C for 90 h. The final viscosity of the medium remained under 20 centipoises at the end of the fermentation (100–140 h). The fermentation of whey enabled a reduction of the lactose content up to 50%. The polysaccharide-containing fractions were composed of glucose, galactose, mannose, rhamnose and fucose and had M, < 5800. The polysaccharide may have applications as a low viscosity stabilizing agent.     

Comparative studies of lipopolysaccharide and exopolysaccharide from a virulent strain of Pseudomonas solanacearum and from three avirulent mutants.

The composition of the Pseudomonas solanacearum lipolysaccharide (LPS) was found to be similar to that described for the LPS of enterobacteria. The lipid A contained fatty acids and glucosamine in a molar ratio of 5:2. The LPS fraction contained 2-keto-3-deoxyoctulosonic acid, L-glycero-D-mannoheptose, hexoses (glucose, rhamnose, and glucosamine), and a pentose (xylose). The LPSs from the wild-type strain (GMI1000), from the spontaneous rough mutant (GMI2000), and from their respective acridine orange-resistant (Acrr) mutants (GMI1178 and GMI2179) contained the same component sugars in their polysaccharide moieties, but the relative amounts of each sugar varied greatly. Spontaneous mutation to the rough type was characterized by a decrease in the ratio of rhamnose to glucose, whereas a reverse effect was seen for the acridine orange resistance mutation from the parent strains (GMI1000 and GMI2000) to the respective mutant strains (GMI1178 and GMI2179). The exopolysaccharide (EPS) from GMI1000 was found to be composed of two fractions: a heteropolysaccharide (galactosamine, glucose, and rhamnose) excluded from Sephadex G-50 and an additional glucan with a lower molecular weight. Strains GMI1000 and GMI1178 produced comparable amounts of EPS, GMI2179 synthesized less EPS, and GMI2000 produced no detectable EPS. High-pressure liquid chromatography and 13C nuclear magnetic resonance analyses revealed some differences between these EPSs. The glucan fraction seemed to be the major component of the EPS from GMI2179, whereas GMI1000 and GMI1178 EPSs contained both fractions and appeared to differ in the structures of their heteropolysaccharide fractions. Viscosity measurements confirmed differences between whole EPSs produced by the three strains.     

Detection, isolation, and characterization of exopolysaccharide produced by a strain of Phormidium 94a isolated from an arid zone of Mexico

Phormidium 94a, a cyanobacteria that produces extracellular polymeric substances (EPS), was isolated from arid soils of Mexico. Microscopic localization, using histochemical techniques like the Toluidine blue technique, was done in order to demonstrate the presence of EPS. Acetone was added to precipitate the EPS. In this study we characterized the EPS by GC, HPLC, and IR techniques. The highest fraction of EPS had a molecular weight of 2000 kDa. The sugar composition was galactose, mannose, galacturonic acid, arabinose, and ribose in the three main fractions, and the sugar ratio found was different in each fraction. The low EPS concentrations had a Newtonian behavior, when the concentrations were increased, the behavior changed to pseudoplastic. The EPS rheulogical behavior is similar to low viscosity arabic gum. Also, it was found that an increase in viscosity occurred at longer hydration time. More rheological and toxicological studies are required in order to analyze its possible application in food industries.     

Partial characterization and dynamics of synthesis of high molecular mass exopolysaccharides from Lactobacillus delbrueckii ssp. bulgaricus and Streptococcus thermophilus

Exopolysaccharide (EPS) preparations from Lactobacillus delbrueckii ssp. bulgaricus (L. bulgaricus) strains LBB.B26 and LBB.B332 and Streptococcus thermophilus strains LBB.T54 and LBB.T6V were characterized using ion-exchange chromatography and gel filtration. All four preparations contained a neutral EPS with molecular mass in the range of 1.3−1.6 × 10⁶ Da (HMM-EPS). The EPS preparations from the two L. bulgaricus strains also contained an acidic low molecular mass EPS fraction (LMM-EPS) comprising from 10% to 34% of the total EPS yield. HMM-EPS preparations were subjected to High Pressure Liquid Chromatography (HPLC) analysis of monomer sugars after complete hydrolysis. Glucose, galactose and/or rhamnose in different ratios proved to be the principal sugars building the HMM-EPS from all four strains. The chemical composition of HMM-EPS was strictly strain-specific. The LMM-EPS contained galactose. The viscosifying properties of the four different HMM-EPS varied greatly with intrinsic viscosity in the range from 0.26 (strain B26) to 2.38 (strain T6V). For 24 h the two L. bulgaricus strains accumulated more HMM-EPS in milk (>70 mg l⁻¹) than S. thermophilus strains T54 and T6V (<30 mg l⁻¹), but maximal yields were reached earlier with cocci (8 h) than with rods (16–24 h). The contribution of HMM-EPS production to increased viscosity of fermented milk was demonstrated for all of the tested strains grown as monocultures or as mixed yogurt starters compared to non-EPS producing S. thermophilus LBB.A and poor EPS-producer L. bulgaricus LBB.B5. The extent of increased viscosity was strongly dependent on the nature of the produced HMM-EPS, rather than simply on polymer yield.     

Physicochemical Properties of the Microbial Exopolysaccharide Ethapolan Synthesized on a Mixture of Growth Substrates

Some physicochemical properties of the microbial exopolysaccharide (EPS) ethapolan synthesized by Acinetobacter sp. 12S depended on whether the producer was grown on a mixture of ethanol and glucose or on a single substrate. Irrespective of the carbon source in the nutrient medium, the contents of carbohydrates, pyruvic acid, uronic acids, and mineral components in the EPS remained unchanged. The EPS were also identical in their monosaccharide composition: the molar ratio of glucose, mannose, galactose, and rhamnose was 3 : 2 : 1 : 1. EPS with a higher content of fatty acids was synthesized during growth on the mixture of ethanol and glucose. The average molecular mass and the content of high-molecular (M > 2 MDa) fractions were greater in ethapolan produced on the substrate mixture. In the presence of 0.1 M KCl, after transformation into the H⁺ form, and in the Cu²⁺–glycine system, solutions of these EPS showed higher viscosity than solutions of EPS synthesized on single substrates. The reasons for the improved rheological properties of the EPS produced on the substrate mixture are discussed.     

Chemical and rheological properties of an extracellular polysaccharide produced by the cyanobacterium Anabaena sp. ATCC 33047

The cyanobacterium (blue-green alga) Anabaena sp. ATCC 33047 produces an exopolysaccharide (EPS) during the stationary growth phase in batch culture. Chemical analysis of EPS revealed a heteropolysaccharidic nature, with xylose, glucose, galactose, and mannose the main neutral sugars found. The infrared (IR) spectrum of EPS showed absorption bands of carboxylate groups. The average molecular mass of the polymer was 1.35 MDa. Aqueous dispersions at EPS concentrations ranging from 0.2% to 0.6% (w/w) showed marked shear-thinning properties (power-law behavior). Linear dynamic viscoelastic properties showed that the elastic component was always higher than the viscous component. Viscous and viscoelastic properties demonstrated the absence of conformational changes within the concentration range studied. Stress-growth experiments revealed that 0.4% and 0.6% (w/w) EPS dispersions showed thixotropic properties. A detailed comparison of the linear dynamic viscoelasticity, transient flow, and decreasing shear rate flow curve properties was made for 0.4% (w/w) dispersions of xanthan gum (XG), Alkemir 110 (AG), and EPS. Viscoelastic spectra demonstrated that the EPS dispersion turned out to be more "fluidlike" than the AG and XG dispersions. The flow indexes indicated that the EPS dispersion was less shear-sensitive than that of XG, showing essentially the same viscosity, that is, >50 s(-1). The fact that viscosities of EPS and AG dispersions were not substantially different within the shear-rate range covered must be emphasized, in relation to EPS potential applications. The rheological behavior of EPS dispersions indicates the formation of an intermediate structure between a random-coil polysaccharide and a weak gel.     

Yield and physicochemical properties of EPS from Halomonas sp. strain TG39 identifies a role for protein and anionic residues (sulfate and phosphate) in emulsification of n‐hexadecane

In this study, we investigated the yield and physicochemical properties of the high molecular weight extracellular polymeric substance (HMW–EPS) produced by Halomonas sp. strain TG39 when grown on different types and ratios of substrates. Glucose (1% w/v) and a peptone/yeast extract ratio of 5.1 (0.6% w/v final concentration) yielded an EPS fraction (HMW‐glucose) exhibiting the highest anionic activity (20.5) and specific emulsifying activity (EI₂₄ = 100%) compared to EPS produced by cells grown on mannitol, sucrose, malt extract or no carbon source. The HMW–EPS fractions were capable of binding ≈255–464 mg of methylene blue (MB) per gram of EPS, which represents the highest reported binding of MB by a bacterial EPS. A comparative evaluation of these properties to those of commercial hydrocolloids indicated that the combined effect of protein and anionic residues of the HMW–EPS contributed to its ability to emulsify n‐hexadecane. Liquid chromatography revealed the HMW‐glucose EPS to be a heterogeneous polymer with a polydispersity index of 1.8. This work presents evidence of a correlation between the anionic nature and protein content of bacterial EPS with its emulsifying qualities, and identifies EPS produced by strain TG39 as a high MB‐binding bacterial sorbant with potential biotechnological application. Biotechnol. Bioeng. 2009;103: 207–216. © 2008 Wiley Periodicals, Inc.     

Screening and selection of exopolysaccharide-producing strains of Lactobacillus delbrueckii subsp. bulgaricus

AIMS: The selection of exopolysaccharide (EPS)-producing strains of Lactobacillus delbrueckii subsp. bulgaricus. METHODS AND RESULTS: Improved EPS-overproducing strains of L. delbrueckii subsp. bulgaricus were derived by chemical mutagenesis and selection. Initial screening of the chemically induced mutant pool relied primarily on the selection of strains with raised levels of lactic acid and reduced biomass formation. Supporting selection criteria used were ropiness and colonial mucoidy. Final screening of candidate strains undertaken in a semi-defined medium in batch culture, resulted in the selection of a mutant with a 35% improvement in specific EPS yield relative to the parent strain. CONCLUSIONS: Initial selection of mutants of L. delbrueckii subsp. bulgaricus on the basis of enhanced formation of lactate and reduced biomass formation, coupled with a ropy or mucoid phenotype, proved to be a satisfactory means of isolating strains with the potential for a higher level of specific EPS production than the parent strain. SIGNIFICANCE AND IMPACT OF THE STUDY: The assay protocol allowed for the selection of an EPS-overproducing strain of L. delbrueckii subsp. bulgaricus. Such strains are useful for the purposes of metabolic studies related to EPS-production.     

Physicochemical properties of the microbial exopolysaccharide ethapolan synthesized on a mixture of growth substrates

Some physicochemical properties of the microbial exopolysaccharide (EPS) ethapolan synthesized by Acinetobacter sp. 12S depended on whether the producer was grown on a mixture of ethanol and glucose or on single substrates. Irrespective of the carbon source in the nutrient medium, the contents of carbohydrates, pyruvic acid, uronic acids, and mineral components in the EPS remained unchanged. The EPS were also identical in their monosaccharide composition: the molar ratio of glucose, mannose, galactose, and rhamnose was 3:2:1:1. EPS with a higher proportion of fatty acids was synthesized during growth on the mixture of ethanol and glucose. Average molecular weight and the proportion of high-molecular (over two million) fractions were greater in ethapolan produced on the substrate mixture. In the presence of 0.1 M KCl, after transformation into the H+ form, and in the Cu(2+)-glycine system, solutions of these EPS showed higher viscosity than solutions of EPS synthesized on single substrates. The reasons for the improved rheological properties of the EPS produced on the substrate mixture are discussed.     

A comparison between the hot and cold water soluble fractions of two locust bean gum samples

Locust bean gum extracted from two carob flours from eastern and western Mediterranean sources were fractionated on the basis of their solubility in water. Weight-average molecular weights determined by sedimentation equilibrium were about 300 000 for both the hot water and cold water soluble fractions, whereas a commercial sample of guar gum had a molecular weight of 700 000. Their values were lower than would be predicted from Mark-Houwink relationships where molecular weights were originally determined by light scattering.

The hot water soluble fraction from the eastern Mediterranean flour showed unexpected rheological behaviour. It had an extremely high Huggins' constant and a different relationship between the coil overlap parameter and the zero shear rate viscosity compared with previously reported results for galactomannans. Both effects may be explained by the anomalously low intrinsic viscosity of this fraction when determined by a Huggins' extrapolation. The use of the Kraemer extrapolation gave significantly higher intrinsic viscosities for this particular sample. Gels formed from the two hot water soluble fractions with κ-carrageenan had similar rheological properties.     

Extraction and physicochemical characterization of Sargassum vulgare alginate from Brazil

Alginate fractions from Sargassum vulgare brown seaweed were characterized by (1)H NMR and fluorescence spectroscopy and by rheological measurements. The alginate extraction conditions were investigated. In order to carry out the structural and physicochemical characterization, samples extracted for 1 and 5h at 60 degrees C were further purified by re-precipitation with ethanol and denoted as SVLV (S. vulgare low viscosity) and SVHV (S. vulgare high viscosity), respectively. The M/G ratio values for SVLV and SVHV were 1.56 and 1.27, respectively, higher than the ratio for most Sargassum spp. alginates (0.19-0.82). The homopolymeric blocks F(GG) and F(MM) of these fractions characterized by (1)H NMR spectroscopy were 0.43 and 0.55 for SVHV and 0.36 and 0.58 for SVLV samples, respectively, these values typically being within 0.28-0.77 and 0.07-0.41, respectively. Therefore, the alginate samples from S. vulgare are much richer in mannuronic block structures than those from other Sargassum species. Values of M(w) for alginate samples were also calculated using intrinsic viscosity data. The M(w) value for SVLV (1.94 x 10(5)g/mol) was lower than that for SVHV (3.3 x 10(5)g/mol). Newtonian behavior was observed for a solution concentration as high as 0.7% for SVLV, while for SVHV the solutions behaved as a Newtonian fluid up to 0.5%. The optimal conditions for obtaining the alginates from S. vulgare were 60 degrees C and 5h extraction. Under these conditions, a more viscous alginate in higher yield was extracted from the seaweed biomass.     

Rheological and light scattering properties of flaxseed polysaccharide aqueous solutions

Polysaccharides isolated from flaxseed meals using ethanol consisted of a soluble ( approximately 7.5% w/w) and an insoluble fraction (2% w/w). The soluble fraction was dialyzed in various salt concentrations and characterized using viscometry and light scattering techniques. Observations using a size-exclusion column coupled to a multiangle laser light scattering (SEC-MALLS) revealed three molecular weight fractions consisting of a small amount ( approximately 17%) of large molecular weight species (1.0 x 10(6)) and a large amount ( approximately 69%) of small molecular weight species (3.1 x 10(5) Da). Dynamic light scattering measurements indicated the presence of very small molecules (hydrodynamic radius approximately 10 nm) and a very large molecular species (hydrodynamic radius in excess of 100 nm); the latter were probably aggregates. The intrinsic viscosity, [eta], of the polysaccharide in Milli-Q water was 1030 +/- 20 mL/g. The viscosity was due largely to the large molecular weight species since viscosity is influenced by the hydrodynamic volume of molecules in solution. The Smidsrod parameter B obtained was approximately 0.018, indicating that the molecules adopted a semi-flexible conformation. This was also indicated by the slope ( approximately 0.56) from the plot of root-mean-square (RMS) radius versus molar mass (M(w)).     

Discovery of the dual polysaccharide composition of emulsan and the isolation of the emulsion stabilizing component

Emulsan has been reported as an emulsion stabilizing amphipathic lipoheteropolysaccharide secreted by the oil-degrading bacterium Acinetobacter venetianus RAG-1. Previously, emulsan was regarded as a single polymer. As a result of developing a new purification process, we have discovered that emulsan is a complex of approximately 80% (w/w) lipopolysaccharide (LPS) and 20% (w/w) high molecular weight exopolysaccharide (EPS). The EPS was purified to 98% (w/w) using tangential flow filtration, Triton X-114 phase extraction, ammonium sulfate precipitation, and hydrophobic interaction chromatography. Several previously reported physical properties of emulsan can be attributed to the LPS fraction, such as charge, fatty acid profile, and solution behavior, while the EPS is responsible for the emulsion stabilization activity. The EPS is believed to be cationic in nature, thus providing an electrostatic binding mechanism for the formation of the emulsan complex.     

Activity of the enzymes involved in the synthesis of exopolysaccharide precursors in an overproducing mutant ropy strain of Streptococcus thermophilus

The activities of some enzymes belonging to the Leloir pathway, phosphoglucomutase, UDP-glucose pyrophosphorylase, UDP-galactose 4-epimerase and galactose 1-P uridyl transferase, were studied in a wild ropy, a non-ropy and an overproducing mutant ropy strain of Streptococcus thermophilus. These activities were assayed over successive culture transfers along with exocellular polysaccharide (EPS) production. The overproducing mutant ropy strain showed increments in polysaccharide production over successive culture transfers, as opposed to reductions in production by the wild ropy strain. The observed variations among strains in the enzyme activities that were analysed in relation to EPS production suggest their involvement in the synthesis of sugar-nucleotide EPS precursors.     

Factors affecting mycelial biomass and exopolysaccharide production in submerged cultivation of Antrodia cinnamomea using complex media

Submerged cultures were used to identify growth-limiting nutrients by Antrodia cinnamomea strains. The mycelial biomass and EPS production by A. cinnamomea BCRC 35396 were markedly higher than other A. cinnamomea strains. A relatively high C/N ratio was favorable for both the mycelial growth (5.41 g/l) and EPS production (0.55 g/l); the optimum ratio was 40. The glucose was available utilized preferentially for mycelial growth, rather than for EPS production. Flushing the culture medium with nitrogen had a stimulating effect on both mycelial growth and EPS production. In addition, peptone, yeast extract and malt extract appeared to be important and significant component for EPS production. Phosphate ion, magnesium ion and thiamine were probably not essential for mycelial growth. By optimizing the effects of additional nutrition, the results showed that 5% (w/v) glucose, 0.8% (w/v) peptone, 0.8% (w/v) yeast extract, 0.8% (w/v) malt extract, 0.03% (w/v) KH2PO4, 0.1% (w/v) MgSO4 .7H2O and 0.1% (w/v) thiamine could lead to the maximum production of EPS (1.36 g/l).     

Development of an improved procedure for isolation and purification of exopolysaccharides produced by Lactobacillus delbrueckii subsp. bulgaricus NCFB 2483

A method was developed for the isolation and purification of exopolysaccharide (EPS) produced by Lactobacillus delbrueckii subsp. bulgaricus NCFB 2483 that can be adapted for industrial-scale operation. Hydrolyzed milk medium, which was ultrafiltered to remove molecular species larger than 2.5×10⁵ Da, was found to be a suitable growth medium for the bacteria, which produced approximately 400 mg EPS/l . Optimal isolation of EPS was achieved using centrifugation, filtration and ethanol precipitation methods. Insoluble and soluble EPS fractions were obtained. The soluble fraction was purified using a series of ethanol precipitations to achieve approximately 98% (w/w) purity. This fraction consisted of galactose, glucose, rhamnose and mannose in the ratio of approximately 5:1:0.6:0.5, with traces of glucosamine.