The Physical Economy of the United States of America

The United States is not only the world's largest economy, but it is also one of the world's largest consumers of natural resources. The country, which is inhabited by some 5% of the world's population, uses roughly one‐fifth of the global primary energy supply and 15% of all extracted materials. This article explores long‐term trends and patterns of material use in the United States. Based on a material flow account (MFA) that is fully consistent with current standards of economy‐wide MFAs and covers domestic extraction, imports, and exports of materials for a 135‐year period, we investigated the evolution of the U.S. industrial metabolism. This process was characterized by an 18‐fold increase in material consumption, a multiplication of material use per capita, and a shift from renewable biomass toward mineral and fossil resources. In spite of considerable improvements in material intensity, no dematerialization has happened so far; in contrast to other high‐income countries, material use has not stabilized since the 1970s, but has continued to grow. This article compares patterns and trends of material use in the United States with those in Japan and the United Kingdom and discusses the factors underlying the disproportionately high level of U.S. per capita resource consumption.     

Cape Town’s Metabolism: Insights from a Material Flow Analysis

This work aims to contribute to the number of urban metabolism case studies using a standardized methodology. An economy‐wide material flow analysis (EW‐MFA) was conducted on the Metropolitan Municipality of Cape Town (South Africa) for the year 2013, using the Eurostat framework. The study provides insights into the city's metabolism through various indicators including direct material input (DMI), domestic material consumption (DMC), and direct material output (DMO), among others. In order to report on the uncertainty of the data, a set of data quality indicators originating from the life cycle assessment literature was used. The results show that domestic extraction involves significant quantities of non‐metallic minerals, and that imports consist primarily of biomass and fossil fuels. The role of the city as a regional hub is also made clear from this study and illustrated by large quantities of food and other materials flowing through the city on their way to or from international markets. The results are compared with indicators from other cities and with previous metabolism work done on Cape Town. To fully grasp the impacts of the city's metabolism, more work needs to be done. It will be necessary to understand the upstream impact of local consumption, and consumption patterns should be differentiated on a more nuanced level (taking into account large differences between household income levels as well as separating the metabolism of industry and commerce from residential consumption).     

Materials Metabolism Analysis of China's Highway Traffic System (HTS) for Promoting Circular Economy

With the rapid growth of highway mileage and vehicles, the Chinese highway traffic system (HTS) has become one of the great resource consumers. This article attempts to evaluate the material metabolism of China's HTS during 2001–2005 using the approach of material flow analysis (MFA) and to explore possible measures to promote circular economy throughout HTS. We measured a set of indicators to illustrate the whole material metabolism of China's HTS. The results indicated that the direct material input (DMI) of China's HTS increased from 1181.26 million tonnes (Mt) in 2001 to 1,874.57 Mt in 2005, and about 80% of DMI was accumulated in the system as infrastructure and vehicles. The domestic processed output (DPO) increased by 59.0% from 2001 to 2005. Carbon dioxide and solid waste accounted for 80.5% and 10.4% of DPO, respectively. The increase of resource consumption and pollutant emissions kept pace with the growth of transportation turnover. All these suggest that China's HTS still followed an extensive linear developing pattern with large resource consumption and heavy pollution emissions during the study period, which brought great challenges to the resources and the environment. Therefore, it's high time for China to implement a circular economy throughout the HTS by instituting resource and energy savings, by reducing emissions in the field of infrastructure construction and maintenance, by reducing vehicles’ energy and materials consumption, and by recycling waste materials.     

Global Patterns and Trends for Non‐Metallic Minerals used for Construction

Despite accounting for almost 50% of global material use, nonmetallic minerals—mostly used for construction of buildings and infrastructure—are the material flow analysis (MFA) category with the highest uncertainty. The main reason for this is incomplete reporting in official national statistics because of ease of availability and the low per‐unit cost of these materials. However, the environmental burden associated with nonmetallic minerals, which include energy use for extraction and transport, land‐use change, and disposal of large amounts of construction demolition waste, call for a thorough understanding of the magnitude of nonmetallic mineral flows. Previous estimates for nonmetallic minerals have used simplistic assumptions. This study aims to increase the precision of nonmetallic mineral accounts at national and global level using consumption of bitumen, bricks, cement, and railways in combination with technical coefficients from the engineering literature to infer the actual yearly consumption of nonmetallic minerals. We estimate the extraction of nonmetallic minerals and provide uncertainty estimates for the new accounts as well as information about consumption by different sectors. Analyzing the evolution of consumption for seven world regions, we find that, in North America and Europe, the consumption of nonmetallic minerals over the past 40 years has followed the growth patterns of population, whereas for all other regions consumption has been closely related to gross domestic product (GDP). A more accurate account of global and country‐by‐country extraction of nonmetallic minerals may provide insights into supply shortages and inform waste management strategies for construction and demolition waste.     

A Material History of Australia

This article presents an analysis of the material history of Australia in the period 1975–2005. The values of economy‐wide indicators of material flow roughly trebled since 1975, and we identify the drivers of this change through structural decomposition analysis. The purpose of this work is to delve beneath the top‐level trends in material flow growth to investigate the structural changes in the economy that have been driving this growth. The major positive drivers of this change were the level of exports, export mix, industrial structure, affluence, and population. Only improvements in material intensity offered retardation of growth in material flow. Other structural components had only small effects at the aggregate level. At a more detailed level, however, the importance of the mineral sectors became apparent. Improvements in mining techniques have reduced material requirements, but increased consumption within the economy and increased exports have offset these reductions. The full roll out of material flow accounting through Australian society and business and a systematic response to its implications will require change in the national growth focus of the last two generations, with serious consideration needed to reverse the current volume‐focused growth of the economy and also to recast neoliberal and globalized trade policies that have dominated the globe for the past decades.     

The Metabolic Transition in Japan

The notion of a (socio‐) metabolic transition has been used to describe fundamental changes in socioeconomic energy and material use during industrialization. During the last century, Japan developed from a largely agrarian economy to one of the world's leading industrial nations. It is one of the few industrial countries that has experienced prolonged dematerialization and recently has adopted a rigorous resource policy. This article investigates changes in Japan's metabolism during industrialization on the basis of a material flow account for the period from 1878 to 2005. It presents annual data for material extraction, trade, and domestic consumption by major material group and explores the relations among population growth, economic development, and material (and energy) use. During the observed period, the size of Japan's metabolism grew by a factor of 40, and the share of mineral and fossil materials in domestic material consumption (DMC) grew to more than 90%. Much of the growth in the Japanese metabolism was based on imported materials and occurred in only 20 years after World War II (WWII), when Japan rapidly built up large stocks of built infrastructure, developed heavy industry, and adopted patterns of mass production and consumption. The surge in material use came to an abrupt halt with the first oil crisis, however. Material use stabilized, and the economy eventually began to dematerialize. Although gross domestic product (GDP) grew much faster than material use, improvements in material intensity are a relatively recent phenomenon. Japan emerges as a role model for the metabolic transition but is also exceptional in many ways.     

Structural Decomposition Analysis of Raw Material Consumption

The aim of this article is to quantify the drivers for the changes in raw material consumption (domestic material consumption expressed in the form of all materials extracted and used in the production phase) in terms of technology, which refers to the concept of sustainable production; the product structure of final demand, which refers to the concept of sustainable consumption; and the volume of final demand, which is related to economic growth. We also aim to determine to what extent the technological development and a shift in product structure of the final demand compensate for the growth in final consumption volume. Therefore, we apply structural decomposition analysis (SDA) to the change in raw material consumption (RMC) of the Czech Republic between 2000 and 2007. To present the study in a broader context, we also show other material flow indicators for the Czech Republic for 2000 and 2007. Our findings of SDA show that final demand structure has a very limited effect on the change in material flows. The rapid change in final demand volume was not compensated for crude oil, metal ores, construction materials, food crops, and timber. For the material category of non‐iron metal ores, even the change in technology contributes to an increase in material flows. The largest relative increases are reported for non‐iron metal ores (38%) and construction materials (30%). The main changes in material flows related to the Czech Republic are driven by exports and enabled by imports, the main source of these increased material flows. This emphasizes the increasing role of international trade.     

Regional material flow accounts for China: Examining China's natural resource use at the provincial and national level

Over the last three decades, China has experienced the most dynamic economic development lifting living standards and resulting in fast‐growing use of natural resources. In the past, the focus has been on national MFA accounts which do not do justice to the second largest economy, home to 19% of the world population and having 30% of global material use. In this research, we calculate material extraction for China at the regional level during 1995–2015 using the most recent available statistical data and applying the most up‐to‐date international calculation methods. In particular, we combine a bottom‐up and top‐down approach for constructing the dataset of China's economically used Domestic Extraction (DEU) in an integrated way. This approach also improves the Chinese national material flow accounts and allows us to present a reliable database of DE of materials for China to date. Our new dataset provides the basis for calculating material footprints and environmental impacts of China's regions. The dataset enables us to evaluate regional resource efficiency trends in China. We find that during the past two decades, China's material use has grown strongly from 11.7 billion tonnes in 1995 to 35.4 billion tonnes in 2015. Material use has accelerated between 2000 and 2010 but slowed down between 2010 and 2015 reflecting the economic contraction caused by the Global Financial Crisis which reduced the global demand for China's manufacturing and a reorientation of China's economic policy settings toward quality of growth. Unsurprisingly, different regions play different roles in the supply chain of materials, achieving different economic performances resulting in very diverse material efficiency outcomes. This information is important to allow for a targeted policy approach to increase resource efficiency, reduce environmental impacts of resource use, and grow wellbeing in China with large positive implications for global sustainability. This study provides the basis for the development of relevant resource management policies for different regions in the future.     

从城市到城市群：京津冀物质代谢特征及影响因素

随着城市化进程和一体化战略的持续推进,城市管理者急需了解城市规律以消减生态-资源-环境挑战,并提供坚实物质基础。以京津冀城市群及其组成城市为研究对象,创新性地从城市群和城市两尺度核算并分析了2000—2017年物质消耗状况及变化趋势,识别并对比了主要贡献物质、贡献部门和影响因素。研究表明：(1)研究期间,京津冀城市群物质消耗量总体上升。从物质类型看,主要由非金属矿物(>34.2%)拉动;从产业结构看,受到工业部门(>58%)绝对影响。首要驱动因素为经济规模(>50%)。(2)各城市物质消耗量与城市群较为类似,总体也呈增长态势,几乎均受到非金属矿物和工业部门驱动,且经济规模起到正向促进作用,不同的是物质消耗强度作用类型多样,且产业结构效应在城市中贡献更为突出。研究结果在一定程度上明确了城市及城市群代谢的规律,能够为优化资源利用效率和资源配置结构奠定基础,为城市及城市群生态管理与调控提供切实可行的落力点。     

Ship Breaking and the Steel Industry in Bangladesh: A Material Flow Perspective

Bangladesh has emerged as a leading ship breaking nation. We conducted a material flow analysis of steel in Bangladesh with an emphasis on the ship breaking industry (SBI). The total aggregate domestic steel consumption in fiscal year (FY) 2010 was 2,930,000 tonnes (t) in Bangladesh; SBI met approximately 51% of the demand for raw materials and 37% of the demand for finished steel products. Rolling industries output in FY2010 was 1,451,000 t; 23% of the input for this production was from ship breaking sources. Dismantled ships also generate high‐quality reusable steel scraps. SBI was found to be the sole source of scraps for small rerolling industries in Bangladesh, and their output in 2008 more than doubled as compared to 2005. Larger rolling industries fulfilled their input needs for steel scraps by using both SBI and imported materials. We found a sharp increase in input imports during the global ship breaking recession in 2003–2007 and when Bangladesh's SBI faced a temporary ban in 2010. Induction furnaces in Bangladesh in FY2010 produced a total of 787,000 t of billets; more than 40% was from ship‐sourced scraps. In 2008, the country's steel consumption was 3,220,000 t, that is, 22 kilograms per person, and the intensity of steel use was 40 grams per U.S. dollar, which was much higher than that of other developing countries with a similar per capita gross domestic product (GDP). The country exhibited a high level of steel consumption relative to its GDP, which is indicative of the contribution of SBI.     

Materials Flow Accounting in Sweden Material Use for National Consumption and for Export

This article presents Swedish economy‐wide material flow accounts for the period 1987‐1998. It also shows possibilities for enhancing the international comparability of aggregated data on material use, by distinguishing between materials used for consumption and export purposes. The direct material input (DMI) is used as an aggregate measure to estimate the amounts of natural resources (except water and air) that are taken from nature into the economy within a year, including imports to and production within the region in question. The division of materials used for consumption and export purposes avoids double counting trade flows when DMI is applied to a group of countries. The annual DMI in Sweden for 1997‐1998, including production and imports, amounts to 24 to 27 metric tons per capita (t/c). The fossil fuel input varies only slightly over the period, from 3.2 t/c in 1991 to 3.6 t/c in 1996, a level deemed unsustainable by the Swedish Environmental Protection Agency. The input of renewable raw materials varies between 8 and 9 t/c. Ores and minerals vary between 11 and 15 t/c. The DMI puts Sweden above estimates made for Germany, the United States, and Japan and in the same range as the Netherlands. The differences in these values can mainly be explained by the relative importance of exports as compared to the size of the economy and by the variation in system boundaries for the data on natural resources. The system boundaries and data sources for natural resources need to be further defined to make the measures fully comparable. Around 5 t/c is exported, whereas the rest, around 20 t/c, is national consumption. The aggregate direct material consumption (DMC), which is the DMI minus exports, communicates the magnitude of resource use. Comparisons of the input with solid waste statistics indicate that quantity of waste (excluding mining waste) in Sweden is equal to about 10% relative of the total resource use. Material collected for recycling by the waste management system is equal to about 5% of the amount of virgin resources brought into society each year.     

Consumption‐based Material Flow Accounting

In 2007, imports accounted for approximately 34% of the material input (domestic extraction and imports) into the Austrian economy and almost 60% of the GDP stemmed from exports. Upstream material inputs into the production of traded goods, however, are not yet included in the standard framework of material flow accounting (MFA). We have reviewed different approaches accounting for these upstream material inputs, or raw material equivalents (RME), positioning them in a wider debate about consumption‐based perspectives in environmental accounting. For the period 1995–2007, we calculated annual RME of Austria's trade and consumption applying a hybrid approach. For exports and competitive imports, we used an environmentally extended input‐output model of the Austrian economy, based on annual supply and use tables and MFA data. For noncompetitive imports, coefficients for upstream material inputs were extracted from life cycle inventories. The RME of Austria's imports and exports were approximately three times larger than the trade flows themselves. In 2007, Austria's raw material consumption was 30 million tonnes or 15% higher than its domestic material consumption. We discuss the material composition of these flows and their temporal dynamics. Our results demonstrate the need for a consumption‐based perspective in MFA to provide robust indicators for dematerialization and resource efficiency analysis of open economies.     

Resource Use in Small Island States

Iceland and Trinidad and Tobago are small open, high‐income island economies with very specific resource‐use patterns. This article presents a material flow analysis (MFA) for the two countries covering a time period of nearly five decades. Both countries have a narrow domestic resource base, their economy being largely based on the exploitation of one or two key resources for export production. In the case of Trinidad and Tobago, the physical economy is dominated by oil and natural gas extraction and petrochemical industries, whereas Iceland's economy for centuries has been based on fisheries. More recently, abundant hydropower and geothermal heat were the basis for the establishment of large export‐oriented metal processing industries, which fully depend on imported raw materials and make use of domestic renewable electricity. Both countries are highly dependent on these natural resources and vulnerable to overexploitation and price developments. We show how the export‐oriented industries lead to high and growing levels of per capita material and energy use and carbon dioxide emissions resulting from large amounts of processing wastes and energy consumption in production processes. The example of small open economies with an industrial production system focused on few, but abundant, key resources and of comparatively low complexity provides interesting insights of how resource endowment paired with availability or absence of infrastructure and specific institutional arrangements drives domestic resource‐use patterns. This also contributes to a better understanding and interpretation of MFA indicators, such as domestic material consumption.     

Anthropogenic Carbon Stock Dynamics of Pulp and Paper Products in Germany

Carbon‐based materials (CBMs) for energetic and material purposes combine biogenic and anthropogenic carbon cycles. In the latter, numerous manufactured products with various in‐use lifespans accumulate as anthropogenic carbon stocks. Understanding the behavior of these stocks is an important requirement to estimate not only future waste amounts, source for secondary raw materials, but also the impacts and effects in carbon emissions and carbon management. Previous models have estimated material stock changes; however, a lack of research in carbon stocks is perceived. Moreover, studies follow in‐use lifespan estimation approaches, such as decay functions, which do not coincide with observed consumption and waste treatment patterns. In the first part of this article, we present a carbon stock‐flow model to analyze inter‐relationships between carbon flows and stocks from raw materials to waste treatment processes considering a consumer perspective, where the dynamics of anthropogenic carbon stocks are completely described. In the second part, we study the pulp and paper industry in Germany under a scenario approach to analyze the behavior, development, and impacts of paper stocks and flows between 2010 and 2040. The model provided coherent results, with industrial data estimating 33.9 million metric tons in 2010 in paper stocks, equivalent to 410 kilograms per person. Consumption per capita and in‐use lifespan of products were identified as the most significant variables in carbon stock building. Model simulations show a sustained growth in stocks for the next 30 years, with increase in waste and carbon emissions. But in combination with recycling and reuse mechanisms and consumption patterns, environmental impacts are reduced.     

Greening China's Wastewater Treatment Infrastructure in the Face of Rapid Development: Analysis Based on Material Stock and Flow through 2050

Wastewater treatment infrastructure (WWTI) construction in China has entered an accelerated stage of development in recent years as a result of rapid economic growth, urbanization, and the demand for improving water quality. As a result, a large amount of resources and materials will be allocated for the WWTI, and it is particularly important to find ways to reduce resource consumption effectively so that social dematerialization and sustainable development can be achieved. In this study, we employed the dynamic material flow model to estimate the material flows and stocks of WWTIs and the associated carbon dioxide (CO₂) emissions through 2050, considering effects of a rise in water consumption, a longer lifetime, and an increased material recycling rate. Our results indicate that material consumption in WWTIs will increase rapidly through 2025 to meet the needs of the increased volume of discharged wastewater as well as to overcome the shortage of existing wastewater treatment plants. In contrast with the moderate effects of rise in water consumption, prolonging the lifetime will greatly reduce material consumption in WWTI construction during the period 2030–2050, and approximately 60% of the total material input will be saved in the medium‐lifetime scenario, compared with the short‐lifetime scenario. Material output and CO₂ emissions associated with WWTIs will be reduced by 87% and 37%, respectively, in the medium‐lifetime scenario, compared with the short‐lifetime scenario, under high‐water‐consumption growth. Our results highlight the great importance of pipeline construction and cement consumption in resource consumption associated with WWTI construction in China. Moreover, this study also examined the potential ways to reduce material consumption in WWTI construction in the context of the demand chain, the design, construction, operation and management, and demolition.     

Material Flow Indicators in the Czech Republic in Light of the Accession to the European Union

This article deals with the economy‐wide material flows in the Czech Republic in 1990–2006. It presents in brief the overall trends of the material flow indicators in 1990–2002. The major part of the article is focused on the years 2002–2006, which immediately preceded and followed the accession of the Czech Republic to the European Union in 2004. It is shown that this accession had quite a significant impact on the volume and character of the material flows of the Czech Republic. The accession was beneficial from an economic point of view, as it allowed for an increased supply of materials needed for economic growth. Furthermore, it was accompanied by an improvement in the efficiency of material transformation into economic output. From an environmental and broader sustainability point of view, however, this accession brought about some controversial outcomes. There was a significant increase in the net export of environmental pressure, on one hand, and an increase in net additions to the physical stock of the economy, on the other. Although the former is controversial from the viewpoint of equity in sharing area and resources, the latter places an additional burden on future generations because all physical stocks will turn into waste and emissions at some point, when their life span expires.     

Global Material Flows and Resource Productivity: Forty Years of Evidence

The international industrial ecology (IE) research community and United Nations (UN) Environment have, for the first time, agreed on an authoritative and comprehensive data set for global material extraction and trade covering 40 years of global economic activity and natural resource use. This new data set is becoming the standard information source for decision making at the UN in the context of the post‐2015 development agenda, which acknowledges the strong links between sustainable natural resource management, economic prosperity, and human well‐being. Only if economic growth and human development can become substantially decoupled from accelerating material use, waste, and emissions can the tensions inherent in the Sustainable Development Goals be resolved and inclusive human development be achieved. In this paper, we summarize the key findings of the assessment study to make the IE research community aware of this new global research resource. The global results show a massive increase in materials extraction from 22 billion tonnes (Bt) in 1970 to 70 Bt in 2010, and an acceleration in material extraction since 2000. This acceleration has occurred at a time when global population growth has slowed and global economic growth has stalled. The global surge in material extraction has been driven by growing wealth and consumption and accelerating trade. A material footprint perspective shows that demand for materials has grown even in the wealthiest parts of the world. Low‐income countries have benefited least from growing global resource availability and have continued to deliver primary materials to high‐income countries while experiencing few improvements in their domestic material living standards. Material efficiency, the amount of primary materials required per unit of economic activity, has declined since around 2000 because of a shift of global production from very material‐efficient economies to less‐efficient ones. This global trend of recoupling economic activity with material use, driven by industrialization and urbanization in the global South, most notably Asia, has negative impacts on a suite of environmental and social issues, including natural resource depletion, climate change, loss of biodiversity, and uneven economic development. This research is a good example of the IE research community providing information for evidence‐based policy making on the global stage and testament to the growing importance of IE research in achieving global sustainable development.     

Material Flows and Economic Growth in Developing China

The concept of sustainable development concerns not only the natural environment but also human societies and economies. The method of economy‐wide materials flow accounting and analysis (EW‐MFA) is internationally recognized as a valuable tool for studying the physical dimensions of economies. EW‐MFA has been carried out in many industrialized countries, but very little work has been done for developing China; this article can be regarded as one of the first attempts to study China's economy in terms of materials flows. In this article we have compiled materials flow accounts for China during the time series 1990 to 2002 and derived indicators associated with international comparison. Results show that the annual material consumption of China's economy continuously increased except for a slump around 1998, whereas the material efficiency exhibited a three‐phase trend reflecting different macropolicies of the Eighth, Ninth, and Tenth Five‐Year Plans implemented by the central government. Based on this experience with EW‐MFA for China, suggestions for methodology development and further research are given for improving EW‐MFA as a more effective tool for environmental management.     

Rationale for and Interpretation of Economy-Wide Materials Flow Analysis and Derived Indicators

Economy-wide material flow analysis (MFA) and derived indicators have been developed to monitor and assess the metabolic performance of economies, that is, with respect to the internal economic flows and the exchange of materials with the environment and with other economies. Indicators such as direct material input (DMI) and direct material consumption (DMC) measure material use related to either production or consumption. Domestic hidden flows (HF) account for unused domestic extraction, and foreign HF represent the upstream primary resource requirements of the imports. DMI and domestic and foreign HF account for the total material requirement (TMR) of an economy. Subtracting the exports and their HF provides the total material consumption (TMC).
DMI and TMR are used to measure the (de-) coupling of resource use and economic growth, providing the basis for resource efficiency indicators. Accounting for TMR allows detection of shifts from domestic to foreign resource requirements. Net addition to stock (NAS) measures the physical growth of an economy. It indicates the distance from flow equilibrium of inputs and outputs that may be regarded as a necessary condition of a sustainable mature metabolism.
We discuss the extent to which MFA-based indicators can also be used to assess the environmental performance. For that purpose we consider different impacts of material flows, and different scales and perspectives of the analysis, and distinguish between turnover-based indicators of generic environmental pressure and impact-based indicators of specific environmental pressure. Indicators such as TMR and TMC are regarded as generic pressure indicators that may not be used to indicate specific environmental impacts. The TMR of industrial countries is discussed with respect to the question of whether volume and composition may be regarded as unsustainable.     

The Raw Material Equivalents of International Trade

This article aims at estimating the raw material equivalents (RMEs)—the upstream used material flows required along the production chain—of imports and exports for some Latin American countries: Brazil, Chile, Colombia, Ecuador, and Mexico. Furthermore, the United States is included in the analysis as a reference for a high‐income economy. The RME concept and the empirical evidence are articulated by use of an input?output methodology. Results are set out for the year 2003 for each of the countries and in time series for the years 1977, 1986, 1996, and 2003 in the case of Chile. The findings show not only the physical dimensions behind direct material traded but also how the previous exporter (importer) position of a country (based on standard material flow analysis indicators) deteriorates, alleviates, or changes. Implications for material consumption indicators, such as direct material consumption (DMC) and raw material consumption (RMC), are also drawn. The results suggest basing the discussion of material flows on a broader set of indicators to obtain a more comprehensive picture of the implications of international trade and its impacts on the environment.