The effect of vicinal polar and charged groups on hydrophobic hydration.

The use of a linear relationship between free energy of hydrophobic hydration and solvent-accessible apolar surface area has been helpful in interpreting the thermodynamics of biological macromolecules. However, a recent study (Y.-K. Cheng, P. J. Rossky, Nature 1998, Vol. 392, pp. 696-699) has established a substantial enthalpic dependence on biomolecular surface topography, originating from solvent hydrogen-bonding loss in a restrictive geometry. In this study, we use molecular dynamics simulations of 2-Zn insulin in water solvent to explore the further effect of vicinal polar or charged groups on hydrophobic hydration at a biomolecular surface. In contrast to the case for solvent more isolated from such polar solute influences, the binding energies of the water that is proximal to the hydrophobic dimeric interface of insulin and vicinal to polar and charged groups are comparable to the bulk solvent value, a result of compensating interaction primarily with the solute counterions. The results suggest a special importance for such polar/charged groups in biological processes involving hydrophobic surface regions of restricted geometry and also suggest a general route for tuning the hydrophobicity of interfaces.     

Molecular dynamics simulation of solvated azurin: correlation between surface solvent accessibility and water residence times

A system containing the globular protein azurin and 3,658 water molecules has been simulated to investigate the influence on water dynamics exerted by a protein surface. Evaluation of water mean residence time for elements having different secondary structure did not show any correlation. Identically, comparison of solvent residence time for atoms having different charge and polarity did not show any clear trend. The main factor influencing water residence time in proximity to a specific site was found to be its solvent accessibility. In detail for atoms belonging to lateral chains and having solvent-accessible surface lower than approximately 16 A(2)a relation is found for which charged and polar atoms are surrounded by water molecules characterized by residence times longer than the non polar ones. The involvement of the low accessible protein atom in an intraprotein hydrogen bond further modulates the length of the water residence time. On the other hand for surfaces having high solvent accessibility, all atoms, independently of their character, are surrounded by water molecules which rapidly exchange with the bulk solvent. Proteins 2000;39:56-67.     

Extensive and Modular Intrinsically Disordered Segments in C. elegans TTN-1 and Implications in Filament Binding, Elasticity and Oblique Striation

TTN-1, a titin like protein in Caenorhabditis elegans, is encoded by a single gene and consists of multiple Ig and fibronectin 3 domains, a protein kinase domain and several regions containing tandem short repeat sequences. We have characterized TTN-1's sarcomere distribution, protein interaction with key myofibrillar proteins as well as the conformation malleability of representative motifs of five classes of short repeats. We report that two antibodies developed to portions of TTN-1 detect an ∼ 2-MDa polypeptide on Western blots. In addition, by immunofluorescence staining, both of these antibodies localize to the I-band and may extend into the outer edge of the A-band in the obliquely striated muscle of the nematode. Six different 300-residue segments of TTN-1 were shown to variously interact with actin and/or myosin in vitro. Conformations of synthetic peptides of representative copies of each of the five classes of repeats—39-mer PEVT, 51-mer CEEEI, 42-mer AAPLE, 32-mer BLUE and 30-mer DispRep—were investigated by circular dichroism at different temperatures, ionic strengths and solvent polarities. The PEVT, CEEEI, DispRep and AAPLE peptides display a combination of a polyproline II helix and an unordered structure in aqueous solution and convert in trifluoroethanol to α-helix (PEVT, CEEEI, DispRep) and β-turn (AAPLE) structures, respectively. The octads in BLUE motifs form unstable α-helix-like structures coils in aqueous solution and negligible heptad-based, α-helical coiled-coils. The α-helical structure, as modeled by threading and molecular dynamics simulations, tends to form helical bundles and crosses based on its 8-4-2-2 hydrophobic helical patterns and charge arrays on its surface. Our finding indicates that APPLE, PEVT, CEEEI and DispRep regions are all intrinsically disordered and highly reminiscent of the conformational malleability and elasticity of vertebrate titin PEVK segments. The proposed presence of long, modular and unstable α-helical oligomerization domains in the BLUE region of TTN-1 could bundle TTN-1 and stabilize oblique striation of the sarcomere.     

Addition of negatively charged residues can reverse the decrease in the solubility of an acidic protein caused by an artificially introduced non-polar surface patch

A non-polar patch on the surface of a protein can cause a reduction in the solubility and stability of the protein, and thereby induce aggregation. However, a non-polar patch may be required so that the protein can bind to another molecule. The mutant 6L—derived from the acidic, dimeric α-helical protein sulerythrin and containing six additional leucines arranged to form a non-polar patch on its surface when properly folded—has a substantially reduced solubility in comparison with that of wild-type sulerythrin. This reduced solubility appears to cause 6L to aggregate. To reverse this aggregation, we mutated 6L so that it contained three to six additional glutamates or aspartates that we predicted would surround the non-polar leucine patch on natively folded 6L. Although the introduction of three glutamates or aspartates increased solubility, the mutants still aggregate and have a reduced α-helical content. Conversely, mutants with six additional glutamates or aspartates appear to exist mostly as dimers and to have the same α-helical content as that of wild-type sulerythrin. Notably, the introduction of five lysines or five arginines at the positions held by the glutamates or aspartates did not recover solubility as effectively as did the negatively charged residues. These results demonstrate that negatively charged residues, but not positively charged ones, surrounding a non-polar patch on an acidic protein can completely reverse the decrease in its solubility caused by the patch of non-polar surface residues.     

Interaction of IAPP and Insulin with Model Interfaces Studied Using Neutron Reflectometry

The islet amyloid polypeptide (IAPP) and insulin are coproduced by the β-cells of the pancreatic islets of Langerhans. Both peptides can interact with negatively charged lipid membranes. The positively charged islet amyloid polypeptide partially inserts into these membranes and subsequently forms amyloid fibrils. The amyloid fibril formation of insulin is also accelerated by the presence of negatively charged lipids, although insulin has a negative net charge at neutral pH-values. We used water-polymer model interfaces to differentiate between the hydrophobic and electrostatic interactions that can drive these peptides to adsorb at an interface. By applying neutron reflectometry, the scattering-length density profiles of IAPP and insulin, as adsorbed at three different water-polymer interfaces, were determined. The islet amyloid polypeptide most strongly adsorbed at a hydrophobic poly-(styrene) surface, whereas at a hydrophilic, negatively charged poly-(styrene sulfonate) interface, the degree of adsorption was reduced by 50%. Almost no IAPP adsorption was evident at this negatively charged interface when we added 100 mM NaCl. On the other hand, negatively charged insulin was most strongly attracted to a hydrophilic, negatively charged interface. Our results suggest that IAPP is strongly attracted to a hydrophobic surface, whereas the few positive charges of IAPP cannot warrant a permanent immobilization of IAPP at a hydrophilic, negatively charged surface at an ionic strength of 100 mM. Furthermore, the interfacial accumulation of insulin at a hydrophilic, negatively charged surface may represent a favorable precondition for nucleus formation and fibril formation.     

Characterization of a dimeric canine form of surfactant protein C (SP-C)

Canine pulmonary surfactant protein C (SP-C) is a small hydrophobic peptide which has one palmitoylated cysteine residue. SP-C enhances the insertion of phospholipids into a monolayer. Two forms of canine SP-C were isolated using Sephadex LH-60 chromatography. It was found that canine SP-C exists in a palmitoylated monomeric form of 3.5 kDa, and a non-acylated dimeric form of 7 kDa. Circular dichroism showed that both forms of SP-C exhibit similar secondary structures at the air/water interface. Both forms of SP-C were able to induce the insertion of phospholipids into a monolayer as measured with the Wilhelmy plate technique. In contrast to the palmitoylated monomeric form of SP-C, the non-acylated dimeric form of SP-C does not require calcium ions to insert phospholipids into a monolayer without the negatively charged phosphatidylglycerol. It is concluded that two forms of canine SP-C exist, but the physiological significance of these different forms remains to be established.     

Influence of isopropanol-water solvent mixtures on the conformation of poly-L-lysine

The helix–coil transition of poly-L -lysine (PLL) in water–isopropanol solvent mixtures has been investigated at room temperature by circular dichroism measurements. Within the range of 70%–80% isopropanol concentration (by volume), the polymer undergoes a sharp transition, characterized by the formation of a fully charged α-helical structure. On the basis of some experimental evidence the role of the organic component in solution appears more complicated than that of strengthening the intramolecular hydrogen bonds in the polymer. By analogy with the distribution of the components of alcohol–water mixtures in simple ionic systems, it is thought that only an high co-solvent concentration brings about an extensive and possible cooperative depletion of the clusters of firmly-bound water molecules in the domain of the polylelectrolyte, favoring the transition to the α-helical structure. On the other hand, CD spectral patterns show that the addition of NaCl in the alcohol-rich–water mixtures of charged poly-L -lysine gives rise to a transition from the α-helical to a β-structures conversion obeys a first-order rate law at all times, with a rate constant dependent on solvent composition and ionic strength. In these conditions, the rate of the process is close to that found for the thermally induced α–β transition. Higher polymer concentration and/or ionic strength cause a phase separation of β-PLL, suggesting that in this case interchain reactions (where hydrogen bonding should play the major role) predominate. Titration experiments on charged α-helical poly-L -lysine in 85% or 90% isopropanol mixtures confirm the occurrence of a conformational transition, which takes place within a degree of dissociation α of 0.2–0.75. The transition is accompanied by a visible turbidity, which increases as the titration proceeds. Implications of the solvent distribution around the macroion on the observed conformational phenomena are also discussed.     

Molecular Dynamics Simulations of Peptides from the Central Domain of Smooth Muscle Caldesmon

Abstract

The central domain of smooth muscle caldesmon contains a highly charged region consisting of ten 13-residue repeats. Experimental evidence obtained from the intact protein and fragments thereof suggests that this entire region forms a single stretch of stable α-helix. We have carried out molecular dynamics simulations on peptides consisting of one, two and three repeats to examine the mechanism of α-helical stability of the central domain at the atomic level. All three peptides show high helical stability on the timescale of the MD simulations. Deviations from α-helical structure in all the simulations arise mainly from the formation of long stretches of π-helix. Interconversion between α-helical and π-helical conformations occurs through insertion of water molecules into α-helical hydrogen bonds and subsequent formation of reverse turns. The α-helical structure is stabilized by electrostatic interactions (salt bridges) between oppositely charged sidechains with i,i+4 spacings, while the π-helix is stabilized by i,i+5 salt bridge interactions. Possible i,i+3 salt bridges are of minor importance. There is a strong preference for salt bridges with a Glu residue N-terminal to a basic sidechain as compared to the opposite orientation. In the double and triple repeat peptides, strong i,i+4 salt bridges exist between the last Glu residue of one repeat and the first Lys residue of the next. This demonstrates a relationship between the repetitive nature of the central domain sequence and its ability to form very long stretches of α-helical structure.     

Biodegradable PLGA microcarriers for injectable delivery of chondrocytes: effect of surface modification on cell attachment and function

Poly(D,L-lactic-co-glycolic acid) (PLGA) microspheres were prepared by an oil/water emulsion solvent evaporation method to use as an injectable microcarrier for cell delivery. Three different kinds of PLGA microspheres having hydrophobic, negatively charged, and positively charged surfaces were prepared. Hydrophobic and negatively charged PLGA microspheres were prepared by using terminally capped and uncapped PLGA polymer, respectively. Positively charged PLGA microspheres were prepared by blending PLGA with PLGA-g-poly(L-lysine) graft copolymer as a surface modifying agent. Bovine chondrocytes were cultured on the three PLGA microspheres under serum conditions to comparatively evaluate cell attachment, cell proliferation, and cell function with respect to surface properties. Positively charged PLGA microspheres showed the highest cell attachment, growth, and function compared to hydrophobic and negatively charged microspheres. Surface-modified PLGA microspheres can potentially be used as an injectable delivery system for cells into a tissue defect site.     

Structural Reorganization of α-Synuclein at Low pH Observed by NMR and REMD Simulations

α-Synuclein is an intrinsically disordered protein that appears in aggregated forms in the brains of patients with Parkinson's disease. The conversion from monomer to aggregate is complex, and aggregation rates are sensitive to changes in amino acid sequence and environmental conditions. It has previously been observed that α-synuclein aggregates faster at low pH than at neutral pH. Here, we combine NMR spectroscopy and molecular simulations to characterize α-synuclein conformational ensembles at both neutral and low pH in order to understand how the altered charge distribution at low pH changes the structural properties of these ensembles and leads to an increase in aggregation rate. The N-terminus, which has a small positive charge at neutral pH due to a balance of positively and negatively charged amino acid residues, is very positively charged at low pH. Conversely, the acidic C-terminus is highly negatively charged at neutral pH and becomes essentially neutral and hydrophobic at low pH. Our NMR experiments and replica exchange molecular dynamics simulations indicate that there is a significant structural reorganization within the low-pH ensemble relative to that at neutral pH in terms of long-range contacts, hydrodynamic radius, and the amount of heterogeneity within the conformational ensembles. At neutral pH, there is a very heterogeneous ensemble with transient contacts between the N-terminus and the non-amyloid β component (NAC); however, at low pH, there is a more homogeneous ensemble that exhibits strong contacts between the NAC and the C-terminus. At both pH values, transient contacts between the N- and C-termini are observed, the NAC region shows similar exposure to solvent, and the entire protein shows similar propensities to secondary structure. Based on the comparison of the neutral- and low-pH conformational ensembles, we propose that exposure of the NAC region to solvent and the secondary-structure propensity are not factors that account for differences in propensity to aggregate in this context. Instead, the comparison of the neutral- and low-pH ensembles suggests that the change in long-range interactions between the low- and neutral-pH ensembles, the compaction of the C-terminal region at low pH, and the uneven distribution of charges across the sequence are key to faster aggregation.     

Stability of secondary structural elements in a solvent-free environment: the α helix

The stability of the α helix as an element of secondary structure is examined in the absence of solvation, in the gas phase. Mass-analyzed ion kinetic energy (MIKE) spectrometry was applied to measure intercharge repulsion and intercharge distance in multiply protonated melittin, a polypeptide known to possess a stable helical structure in a number of different environments. The experimental results, interpreted in combination with molecular mechanics calculations, suggest that triply charged melittin retains its secondary structure in the gas phase. The stability if the α-helical conformation of the polypeptide in the absence of solvent molecules reflects the fact that a network of intrinsic helical hydrogen bonds is energetically more favorable than unfolded conformations. © 1997 Wiley-Liss, Inc.     

Solvent density and long-range dipole field around a DNA-binding protein studied by molecular dynamics

The distribution and orientation of solvent around a DNA-binding protein, 434 Cro, were investigated by molecular dynamics simulations with a periodic-boundary condition. The protein was treated in two states: charged and neutral. The computed high-density sites of the solvent around the protein correlated well with the experimentally determined crystal-water sites, in both the charged and neutral states. A local density map, introduced to investigate the solvent density around the highly mobile regions of the protein, showed a hydration shell around hydrophobic sidechains and hydrogen-bondable sites around hydrophilic sidechains, and also showed that the solvent density is sensitive to the slight concaves of the sidechain surface. The long-range solvent-dipole field was observed around the protein, where the pattern of the dipole ordering was considerably different between the charged and neutral states. A local solvent-dipole field was introduced, and the pattern of the dipole ordering was different between the hydrophobic and hydrophilic sidechains. The dipole field from the charged state provided a higher correlation to the electrostatic field obtained from the Poisson-Boltzmann's equation than that from the neutral state, although the correlation become weak quickly for the both states with increasing the protein-solvent distance.     

The surface of β-sheet proteins contains amphiphilic regions which may provide clues about protein folding

A major bottleneck in the field of biochemistry is our limited understanding of the processes by which a protein folds into its native conformation. Much of the work on this issue has focused on the conserved core of the folded protein. However, one might imagine that a ubiquitous motif for unaided folding or for the recognition of chaperones may involve regions on the surface of the native structure. We explore this possibility by an analysis of the spatial distribution of regions with amphiphilic α-helical potential on the surface of β-sheet proteins. All proteins, Including β-sheet proteins, contain regions with amphiphilic α-helical potential. That is, any α-helix formed by that region would be amphiphilic, having both hydrophobic and hydrophilic surfaces. In the three-dimensional structure of all β-sheet proteins analyzed, we have found a distinct pattern in the spatial distribution of sequences with amphiphilic α-helical potential. The amphiphilic regions occur in ring shaped clusters approximately 20 to 30 Å in diameter on the surface of the protein. In addition, these regions have a strong preference for positively charged amino acids and a lower preference for residues not favorable to α-helix formation. Although the purpose of these amphiphilic regions which are not associated with naturally occurring α-helix is unknown, they may play a critical role in highly conserved processes such as protein folding. © 1996 Wiley-Liss, Inc.     

Production and characterisation of recombinant forms of human pulmonary surfactant protein C (SP-C): Structure and surface activity

Surfactant protein C (SP-C) is an essential component for the surface tension-lowering activity of the pulmonary surfactant system. It contains a valine-rich α helix that spans the lipid bilayer, and is one of the most hydrophobic proteins known so far. SP-C is also an essential component of various surfactant preparations of animal origin currently used to treat neonatal respiratory distress syndrome (NRDS) in preterm infants. The limited supply of this material and the risk of transmission of infectious agents and immunological reactions have prompted the development of synthetic SP-C-derived peptides or recombinant humanized SP-C for inclusion in new preparations for therapeutic use.We describe herein the recombinant production in bacterial cultures of SP-C variants containing phenylalanines instead of the palmitoylated cysteines of the native protein, as fusions to the hydrophilic nuclease A (SN) from Staphylococcus aureus. The resulting chimerae were partially purified by affinity chromatography and subsequently subjected to protease digestion. The SP-C forms were recovered from the digestion mixtures by organic extraction and further purified by size exclusion chromatography. The two recombinant SP-C variants so obtained retained more than 50% α-helical content and showed surface activity comparable to the native protein, as measured by surface spreading of lipid/protein suspensions and from compression π-A isotherms of lipid/protein films. Compared to the protein purified from porcine lungs, the recombinant SP-C forms improved movement of phospholipid molecules into the interface (during adsorption), or out from the interfacial film (during compression), suggesting new possibilities to develop improved therapeutic preparations.     

Conformational changes of peptides at solid/liquid interfaces: a Monte Carlo study

Monte Carlo simulations were performed to study the conformational changes of negatively charged model peptides dissolved in water adsorbed onto charged surfaces. 8-, 16-, and 20-residues peptides were used, each of them consisted of repeating diblock units of aspartic acid (ASP, polar amino acid) and isoleucine (ILE, nonpolar amino acid) residues. We found that a water patch was retained at the charged surface, separating the peptide from it. We believed that these water molecules were primarily responsible for giving a particular orientation to the peptide at the surface. Water did play a role to some extent in the structural stability of the 8-residues peptide. However, for higher chain lengths (16-residues and 20-residues), the intrinsic hydrogen-bonding network (or intrinsic structural stability) showed a predominant effect over hydrophobic dehydration for the stability of the peptide at the surface.     

Modeling H3 histone N-terminal tail and linker DNA interactions

Molecular dynamics computer simulations were performed for the 25-residue N-terminal tail of the H3 histone protein in the proximity of a DNA segment of 10 base pairs (bp), representing a model for the linker DNA in chromatin. Several least biased configurations were used as initial configurations. The secondary structure content of the protein was increased by the presence of DNA close to it, but the locations of the secondary motifs were different for different initial orientations of the DNA grooves with respect to the protein. As a common feature to all simulations, the electrostatic attraction between negatively charged DNA and positively charged protein was screened by the water solvent and counterbalanced by the intrinsic compaction of the protein due to hydrophobic effects. The protein secondary structure limited the covering of DNA by the protein to 4-5 bp. The degree of compaction and charge density of the bound protein suggests a possible role of H3 tail in a nonspecific bending and plasticity of the linker DNA when the protein is located in the crowded dense chromatin.     

A Comparative Study on the Ability of Two Implicit Solvent Lipid Models to Predict Transmembrane Helix Tilt Angles

Free-energy profiles describing the relative orientation of membrane proteins along predefined coordinates can be efficiently calculated by means of umbrella simulations. Such simulations generate reliable orientational distributions but are difficult to converge because of the very long equilibration times of the solvent and the lipid bilayer in explicit representation. Two implicit lipid membrane models are here applied in combination with the umbrella sampling strategy to the simulation of the transmembrane (TM) helical segment from virus protein U (Vpu). The models are used to study both orientation and energetics of this α-helical peptide as a function of hydrophobic mismatch. We observe that increasing the degree of positive hydrophobic mismatch increased the tilt angle of Vpu. These findings agree well with experimental data and as such validate the solvation models used in this study.     

Structural details of urea binding to barnase: a molecular dynamics analysis.

BACKGROUND: The molecular mechanism of urea-induced protein unfolding has not been established. It is generally thought that denaturation results from the stabilizing interactions of urea with portions of the protein that are buried in the native state and become exposed upon unfolding of the protein. RESULTS: We have performed molecular dynamics simulations of barnase (a 110 amino acid RNase from Bacillus amyloliquefaciens) with explicit water and urea molecules at 300 K and 360 K. The native conformation was unaffected in the 300 K simulations at neutral and low pH. Two of the three runs at 360 K and low pH showed some denaturation, with partial unfolding of the hydrophobic core 2. The first solvation shell has a much higher density of urea molecules (water/urea ratio ranging from 2.07 to 2.73) than the bulk (water/urea ratio of 4.56). About one half of the first-shell urea molecules are involved in hydrogen bonds with polar or charged groups on the barnase surface, and between 15% and 18% of the first-shell urea molecules participate in multiple hydrogen bonds with barnase. The more stably bound urea molecules tend to be in crevices or pockets on the barnase surface. CONCLUSIONS: The simulation results indicate that an aqueous urea solution solvates the surface of a polypeptide chain more favorably than pure water. Urea molecules interact more favorably with nonpolar groups of the protein than water does, and the presence of urea improves the interactions of water molecules with the hydrophilic groups of the protein. The results suggest that urea denaturation involves effects on both nonpolar and polar groups of proteins.     

Selection of a buried salt bridge by phage display

The α-helical coiled coil is a valuable folding motif for protein design and engineering. By means of phage display technology, we selected a capable binding partner for one strand of a coiled coil bearing a charged amino acid in a central hydrophobic core position. This procedure resulted in a novel coiled coil pair featuring an opposed Glu-Lys pair arranged staggered within the hydrophobic core of a coiled coil structure. Structural investigation of the selected coiled coil dimer by CD spectroscopy and MD simulations suggest that a buried salt bridge within the hydrophobic core enables the specific dimerization of two peptides.