Alignment of protein sequences by their profiles

The accuracy of an alignment between two protein sequences can be improved by including other detectably related sequences in the comparison. We optimize and benchmark such an approach that relies on aligning two multiple sequence alignments, each one including one of the two protein sequences. Thirteen different protocols for creating and comparing profiles corresponding to the multiple sequence alignments are implemented in the SALIGN command of MODELLER. A test set of 200 pairwise, structure-based alignments with sequence identities below 40% is used to benchmark the 13 protocols as well as a number of previously described sequence alignment methods, including heuristic pairwise sequence alignment by BLAST, pairwise sequence alignment by global dynamic programming with an affine gap penalty function by the ALIGN command of MODELLER, sequence-profile alignment by PSI-BLAST, Hidden Markov Model methods implemented in SAM and LOBSTER, pairwise sequence alignment relying on predicted local structure by SEA, and multiple sequence alignment by CLUSTALW and COMPASS. The alignment accuracies of the best new protocols were significantly better than those of the other tested methods. For example, the fraction of the correctly aligned residues relative to the structure-based alignment by the best protocol is 56%, which can be compared with the accuracies of 26%, 42%, 43%, 48%, 50%, 49%, 43%, and 43% for the other methods, respectively. The new method is currently applied to large-scale comparative protein structure modeling of all known sequences.     

A simple and fast approach to prediction of protein secondary structure from multiply aligned sequences with accuracy above 70%.

To improve secondary structure predictions in protein sequences, the information residing in multiple sequence alignments of substituted but structurally related proteins is exploited. A database comprised of 70 protein families and a total of 2,500 sequences, some of which were aligned by tertiary structural superpositions, was used to calculate residue exchange weight matrices within alpha-helical, beta-strand, and coil substructures, respectively. Secondary structure predictions were made based on the observed residue substitutions in local regions of the multiple alignments and the largest possible associated exchange weights in each of the three matrix types. Comparison of the observed and predicted secondary structure on a per-residue basis yielded a mean accuracy of 72.2%. Individual alpha-helix, beta-strand, and coil states were respectively predicted at 66.7, and 75.8% correctness, representing a well-balanced three-state prediction. The accuracy level, verified by cross-validation through jack-knife tests on all protein families, dropped, on average, to only 70.9%, indicating the rigor of the prediction procedure. On the basis of robustness, conceptual clarity, accuracy, and executable efficiency, the method has considerable advantage, especially with its sole reliance on amino acid substitutions within structurally related proteins.     

NdPASA: a novel pairwise protein sequence alignment algorithm that incorporates neighbor-dependent amino acid propensities

Sequence alignment has become one of the essential bioinformatics tools in biomedical research. Existing sequence alignment methods can produce reliable alignments for homologous proteins sharing a high percentage of sequence identity. The performance of these methods deteriorates sharply for the sequence pairs sharing less than 25% sequence identity. We report here a new method, NdPASA, for pairwise sequence alignment. This method employs neighbor-dependent propensities of amino acids as a unique parameter for alignment. The values of neighbor-dependent propensity measure the preference of an amino acid pair adopting a particular secondary structure conformation. NdPASA optimizes alignment by evaluating the likelihood of a residue pair in the query sequence matching against a corresponding residue pair adopting a particular secondary structure in the template sequence. Using superpositions of homologous proteins derived from the PSI-BLAST analysis and the Structural Classification of Proteins (SCOP) classification of a nonredundant Protein Data Bank (PDB) database as a gold standard, we show that NdPASA has improved pairwise alignment. Statistical analyses of the performance of NdPASA indicate that the introduction of sequence patterns of secondary structure derived from neighbor-dependent sequence analysis clearly improves alignment performance for sequence pairs sharing less than 20% sequence identity. For sequence pairs sharing 13-21% sequence identity, NdPASA improves the accuracy of alignment over the conventional global alignment (GA) algorithm using the BLOSUM62 by an average of 8.6%. NdPASA is most effective for aligning query sequences with template sequences whose structure is known. NdPASA can be accessed online at http://astro.temple.edu/feng/Servers/BioinformaticServers.htm.     

Prediction of protein secondary structure content for the twilight zone sequences

Secondary protein structure carries information about local structural arrangements, which include three major conformations: alpha-helices, beta-strands, and coils. Significant majority of successful methods for prediction of the secondary structure is based on multiple sequence alignment. However, multiple alignment fails to provide accurate results when a sequence comes from the twilight zone, that is, it is characterized by low (<30%) homology. To this end, we propose a novel method for prediction of secondary structure content through comprehensive sequence representation, called PSSC-core. The method uses a multiple linear regression model and introduces a comprehensive feature-based sequence representation to predict amount of helices and strands for sequences from the twilight zone. The PSSC-core method was tested and compared with two other state-of-the-art prediction methods on a set of 2187 twilight zone sequences. The results indicate that our method provides better predictions for both helix and strand content. The PSSC-core is shown to provide statistically significantly better results when compared with the competing methods, reducing the prediction error by 5-7% for helix and 7-9% for strand content predictions. The proposed feature-based sequence representation uses a comprehensive set of physicochemical properties that are custom-designed for each of the helix and strand content predictions. It includes composition and composition moment vectors, frequency of tetra-peptides associated with helical and strand conformations, various property-based groups like exchange groups, chemical groups of the side chains and hydrophobic group, auto-correlations based on hydrophobicity, side-chain masses, hydropathy, and conformational patterns for beta-sheets. The PSSC-core method provides an alternative for predicting the secondary structure content that can be used to validate and constrain results of other structure prediction methods. At the same time, it also provides useful insight into design of successful protein sequence representations that can be used in developing new methods related to prediction of different aspects of the secondary protein structure.     

PROMALS: towards accurate multiple sequence alignments of distantly related proteins

MOTIVATION: Accurate multiple sequence alignments are essential in protein structure modeling, functional prediction and efficient planning of experiments. Although the alignment problem has attracted considerable attention, preparation of high-quality alignments for distantly related sequences remains a difficult task. RESULTS: We developed PROMALS, a multiple alignment method that shows promising results for protein homologs with sequence identity below 10%, aligning close to half of the amino acid residues correctly on average. This is about three times more accurate than traditional pairwise sequence alignment methods. PROMALS algorithm derives its strength from several sources: (i) sequence database searches to retrieve additional homologs; (ii) accurate secondary structure prediction; (iii) a hidden Markov model that uses a novel combined scoring of amino acids and secondary structures; (iv) probabilistic consistency-based scoring applied to progressive alignment of profiles. Compared to the best alignment methods that do not use secondary structure prediction and database searches (e.g. MUMMALS, ProbCons and MAFFT), PROMALS is up to 30% more accurate, with improvement being most prominent for highly divergent homologs. Compared to SPEM and HHalign, which also employ database searches and secondary structure prediction, PROMALS shows an accuracy improvement of several percent. AVAILABILITY: The PROMALS web server is available at: http://prodata.swmed.edu/promals/. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.     

Prediction of protein secondary structure content using amino acid composition and evolutionary information

Knowing protein structure and inferring its function from the structure are one of the main issues of computational structural biology, and often the first step is studying protein secondary structure. There have been many attempts to predict protein secondary structure contents. Previous attempts assumed that the content of protein secondary structure can be predicted successfully using the information on the amino acid composition of a protein. Recent methods achieved remarkable prediction accuracy by using the expanded composition information. The overall average error of the most successful method is 3.4%. Here, we demonstrate that even if we only use the simple amino acid composition information alone, it is possible to improve the prediction accuracy significantly if the evolutionary information is included. The idea is motivated by the observation that evolutionarily related proteins share the similar structure. After calculating the homolog-averaged amino acid composition of a protein, which can be easily obtained from the multiple sequence alignment by running PSI-BLAST, those 20 numbers are learned by a multiple linear regression, an artificial neural network and a support vector regression. The overall average error of method by a support vector regression is 3.3%. It is remarkable that we obtain the comparable accuracy without utilizing the expanded composition information such as pair-coupled amino acid composition. This work again demonstrates that the amino acid composition is a fundamental characteristic of a protein. It is anticipated that our novel idea can be applied to many areas of protein bioinformatics where the amino acid composition information is utilized, such as subcellular localization prediction, enzyme subclass prediction, domain boundary prediction, signal sequence prediction, and prediction of unfolded segment in a protein sequence, to name a few.     

Refinement by shifting secondary structure elements improves sequence alignments

Constructing a model of a query protein based on its alignment to a homolog with experimentally determined spatial structure (the template) is still the most reliable approach to structure prediction. Alignment errors are the main bottleneck for homology modeling when the query is distantly related to the template. Alignment methods often misalign secondary structural elements by a few residues. Therefore, better alignment solutions can be found within a limited set of local shifts of secondary structures. We present a refinement method to improve pairwise sequence alignments by evaluating alignment variants generated by local shifts of template‐defined secondary structures. Our method SFESA is based on a novel scoring function that combines the profile‐based sequence score and the structure score derived from residue contacts in a template. Such a combined score frequently selects a better alignment variant among a set of candidate alignments generated by local shifts and leads to overall increase in alignment accuracy. Evaluation of several benchmarks shows that our refinement method significantly improves alignments made by automatic methods such as PROMALS, HHpred and CNFpred. The web server is available at http://prodata.swmed.edu/sfesa . Proteins 2015; 83:411–427. © 2014 Wiley Periodicals, Inc.     

Combining the GOR V algorithm with evolutionary information for protein secondary structure prediction from amino acid sequence

We have modified and improved the GOR algorithm for the protein secondary structure prediction by using the evolutionary information provided by multiple sequence alignments, adding triplet statistics, and optimizing various parameters. We have expanded the database used to include the 513 non-redundant domains collected recently by Cuff and Barton (Proteins 1999;34:508-519; Proteins 2000;40:502-511). We have introduced a variable size window that allowed us to include sequences as short as 20-30 residues. A significant improvement over the previous versions of GOR algorithm was obtained by combining the PSI-BLAST multiple sequence alignments with the GOR method. The new algorithm will form the basis for the future GOR V release on an online prediction server. The average accuracy of the prediction of secondary structure with multiple sequence alignment and full jack-knife procedure was 73.5%. The accuracy of the prediction increases to 74.2% by limiting the prediction to 375 (of 513) sequences having at least 50 PSI-BLAST alignments. The average accuracy of the prediction of the new improved program without using multiple sequence alignments was 67.5%. This is approximately a 3% improvement over the preceding GOR IV algorithm (Garnier J, Gibrat JF, Robson B. Methods Enzymol 1996;266:540-553; Kloczkowski A, Ting K-L, Jernigan RL, Garnier J. Polymer 2002;43:441-449). We have discussed alternatives to the segment overlap (Sov) coefficient proposed by Zemla et al. (Proteins 1999;34:220-223).     

A strategy for the rapid multiple alignment of protein sequences. Confidence levels from tertiary structure comparisons

An algorithm is presented for the multiple alignment of protein sequences that is both accurate and rapid computationally. The approach is based on the conventional dynamic-programming method of pairwise alignment. Initially, two sequences are aligned, then the third sequence is aligned against the alignment of both sequences one and two. Similarly, the fourth sequence is aligned against one, two and three. This is repeated until all sequences have been aligned. Iteration is then performed to yield a final alignment. The accuracy of sequence alignment is evaluated from alignment of the secondary structures in a family of proteins. For the globins, the multiple alignment was on average 99% accurate compared to 90% for pairwise comparison of sequences. For the alignment of immunoglobulin constant and variable domains, the use of many sequences yielded an alignment of 63% average accuracy compared to 41% average for individual variable/constant alignments. The multiple alignment algorithm yields an assignment of disulphide connectivity in mammalian serotransferrin that is consistent with crystallographic data, whereas pairwise alignments give an alternative assignment.     

Information on the secondary structure improves the quality of protein sequence alignment

The most popular algorithms employed in the pairwise alignment of protein primary structures (Smith-Watermann (SW) algorithm, FASTA, BLAST, etc.) only analyze the amino acid sequence. The SW algorithm is the most accurate, yielding alignments that agree best with superimpositions of the corresponding spatial structures of proteins. However, even the SW algorithm fails to reproduce the spatial structure alignment when the sequence identity is lower than 30%. The objective of this work was to develop a new and more accurate algorithm taking the secondary structure of proteins into account. The alignments generated by this algorithm and having the maximal weight with the secondary structure considered proved to be more accurate than SW alignments. With sequences having less than 30% identity, the accuracy (i.e., the portion of reproduced positions of a reference alignment obtained by superimposing the protein spatial structures) of the new algorithm is 58 vs. 35% of the SW algorithm. The accuracy of the new algorithm is much the same with secondary structures established experimentally or predicted theoretically. Hence, the algorithm is applicable to proteins with unknown spatial structures. The program is available at ftp://194.149.64.196/STRUSWER/.     

A multiple-template approach to protein threading

Most threading methods predict the structure of a protein using only a single template. Due to the increasing number of solved structures, a protein without solved structure is very likely to have more than one similar template structures. Therefore, a natural question to ask is if we can improve modeling accuracy using multiple templates. This article describes a new multiple-template threading method to answer this question. At the heart of this multiple-template threading method is a novel probabilistic-consistency algorithm that can accurately align a single protein sequence simultaneously to multiple templates. Experimental results indicate that our multiple-template method can improve pairwise sequence-template alignment accuracy and generate models with better quality than single-template models even if they are built from the best single templates (P-value <10(-6)) while many popular multiple sequence/structure alignment tools fail to do so. The underlying reason is that our probabilistic-consistency algorithm can generate accurate multiple sequence/template alignments. In another word, without an accurate multiple sequence/template alignment, the modeling accuracy cannot be improved by simply using multiple templates to increase alignment coverage. Blindly tested on the CASP9 targets with more than one good template structures, our method outperforms all other CASP9 servers except two (Zhang-Server and QUARK of the same group). Our probabilistic-consistency algorithm can possibly be extended to align multiple protein/RNA sequences and structures.     

Predicting protein secondary structure and solvent accessibility with an improved multiple linear regression method

We have improved the multiple linear regression (MLR) algorithm for protein secondary structure prediction by combining it with the evolutionary information provided by multiple sequence alignment of PSI-BLAST. On the CB513 dataset, the three states average overall per-residue accuracy, Q(3), reached 76.4%, while segment overlap accuracy, SOV99, reached 73.2%, using a rigorous jackknife procedure and the strictest reduction of eight states DSSP definition to three states. This represents an improvement of approximately 5% on overall per-residue accuracy compared with previous work. The relative solvent accessibility prediction also benefited from this combination of methods. The system achieved 77.7% average jackknifed accuracy for two states prediction based on a 25% relative solvent accessibility mode, with a Mathews' correlation coefficient of 0.548. The improved MLR secondary structure and relative solvent accessibility prediction server is available at http://spg.biosci.tsinghua.edu.cn/.     

构建基于折叠核心的全α类蛋白取代矩阵

氨基酸残基取代矩阵是影响多序列比对效果的重要因素,现有的取代矩阵对低相似序列的比对性能较低.在已有的 BLOSUM 取代矩阵算法基础上,定义了基于蛋白质折叠核心结构的序列 结构数据块;提出一种新的基于全α类蛋白质折叠核心结构的氨基酸残基取代矩阵——TOPSSUM25,用于提高低相似度序列的比对效果.将矩阵TOPSSUM25导入多序列比对程序,对相似性小于25%的一组四螺旋束序列 结构数据块的测试结果表明,基于 TOPSSUM25的多序列比对效果明显优于BLOSUM30矩阵;基于一个BAliBASE子集的比对检验也进一步表明, TOPSSUM25在全α类蛋白质的两两序列比对上优于BLOSUM30矩阵.研究结果可为进一步的阐明低同源蛋白质序列 结构 功能关系提供帮助.     

Multiple linear regression for protein secondary structure prediction

In the present work, a novel method was proposed for prediction of secondary structure. Over a database of 396 proteins (CB396) with a three-state-defining secondary structure, this method with jackknife procedure achieved an accuracy of 68.8% and SOV score of 71.4% using single sequence and an accuracy of 73.7% and SOV score of 77.3% using multiple sequence alignments. Combination of this method with DSC, PHD, PREDATOR, and NNSSP gives Q3 = 76.2% and SOV = 79.8%.     

SPEM: improving multiple sequence alignment with sequence profiles and predicted secondary structures

MOTIVATION: Multiple sequence alignment is an essential part of bioinformatics tools for a genome-scale study of genes and their evolution relations. However, making an accurate alignment between remote homologs is challenging. Here, we develop a method, called SPEM, that aligns multiple sequences using pre-processed sequence profiles and predicted secondary structures for pairwise alignment, consistency-based scoring for refinement of the pairwise alignment and a progressive algorithm for final multiple alignment. RESULTS: The alignment accuracy of SPEM is compared with those of established methods such as ClustalW, T-Coffee, MUSCLE, ProbCons and PRALINE(PSI) in easy (homologs) and hard (remote homologs) benchmarks. Results indicate that the average sum of pairwise alignment scores given by SPEM are 7-15% higher than those of the methods compared in aligning remote homologs (sequence identity <30%). Its accuracy for aligning homologs (sequence identity >30%) is statistically indistinguishable from those of the state-of-the-art techniques such as ProbCons or MUSCLE 6.0. AVAILABILITY: The SPEM server and its executables are available on http://theory.med.buffalo.edu.     

Alignments grow, secondary structure prediction improves.

Using information from sequence alignments significantly improves protein secondary structure prediction. Typically, more divergent profiles yield better predictions. Recently, various groups have shown that accuracy can be improved significantly by using PSI-BLAST profiles to develop new prediction methods. Here, we focused on the influences of various alignment strategies on two 8-year-old PHD methods. The following results stood out. (i) PHD using pairwise alignments predicts about 72% of all residues correctly in one of the three states: helix, strand, and other. Using larger databases and PSI-BLAST raised accuracy to 75%. (ii) More than 60% of the improvement originated from the growth of current sequence databases; about 20% resulted from detailed changes in the alignment procedure (substitution matrix, thresholds, and gap penalties). Another 20% of the improvement resulted from carefully using iterated PSI-BLAST searches. (iii) It is of interest that we failed to improve prediction accuracy further when attempting to refine the alignment by dynamic programming (MaxHom and ClustalW). (iv) Improvement through family growth appears to saturate at some point. However, most families have not reached this saturation. Hence, we anticipate that prediction accuracy will continue to rise with database growth.     

Improving the prediction of RNA secondary structure by detecting and assessing conserved stems

The prediction of RNA secondary structure can be facilitated by incorporating with comparative analysis of homologous sequences. However, most of existing comparative methods are vulnerable to alignment errors and thus are of low accuracy in practical application. Here we improve the prediction of RNA secondary structure by detecting and assessing conserved stems shared by all sequences in the alignment. Our method can be summarized by: 1) we detect possible stems in single RNA sequence using the so-called position matrix with which some possibly paired positions can be uncovered; 2) we detect conserved stems across multiple RNA sequences by multiplying the position matrices; 3) we assess the conserved stems using the Signal-to-Noise; 4) we compute the optimized secondary structure by incorporating the so-called reliable conserved stems with predictions by RNAalifold program. We tested our method on data sets of RNA alignments with known secondary structures. The accuracy, measured as sensitivity and specificity, of our method is greater than predictions by RNAalifold.     

A Consensus Data Mining secondary structure prediction by combining GOR V and Fragment Database Mining

The major aim of tertiary structure prediction is to obtain protein models with the highest possible accuracy. Fold recognition, homology modeling, and de novo prediction methods typically use predicted secondary structures as input, and all of these methods may significantly benefit from more accurate secondary structure predictions. Although there are many different secondary structure prediction methods available in the literature, their cross-validated prediction accuracy is generally <80%. In order to increase the prediction accuracy, we developed a novel hybrid algorithm called Consensus Data Mining (CDM) that combines our two previous successful methods: (1) Fragment Database Mining (FDM), which exploits the Protein Data Bank structures, and (2) GOR V, which is based on information theory, Bayesian statistics, and multiple sequence alignments (MSA). In CDM, the target sequence is dissected into smaller fragments that are compared with fragments obtained from related sequences in the PDB. For fragments with a sequence identity above a certain sequence identity threshold, the FDM method is applied for the prediction. The remainder of the fragments are predicted by GOR V. The results of the CDM are provided as a function of the upper sequence identities of aligned fragments and the sequence identity threshold. We observe that the value 50% is the optimum sequence identity threshold, and that the accuracy of the CDM method measured by Q(3) ranges from 67.5% to 93.2%, depending on the availability of known structural fragments with sufficiently high sequence identity. As the Protein Data Bank grows, it is anticipated that this consensus method will improve because it will rely more upon the structural fragments.     

3DCoffee: combining protein sequences and structures within multiple sequence alignments

Most bioinformatics analyses require the assembly of a multiple sequence alignment. It has long been suspected that structural information can help to improve the quality of these alignments, yet the effect of combining sequences and structures has not been evaluated systematically. We developed 3DCoffee, a novel method for combining protein sequences and structures in order to generate high-quality multiple sequence alignments. 3DCoffee is based on TCoffee version 2.00, and uses a mixture of pairwise sequence alignments and pairwise structure comparison methods to generate multiple sequence alignments. We benchmarked 3DCoffee using a subset of HOMSTRAD, the collection of reference structural alignments. We found that combining TCoffee with the threading program Fugue makes it possible to improve the accuracy of our HOMSTRAD dataset by four percentage points when using one structure only per dataset. Using two structures yields an improvement of ten percentage points. The measures carried out on HOM39, a HOMSTRAD subset composed of distantly related sequences, show a linear correlation between multiple sequence alignment accuracy and the ratio of number of provided structure to total number of sequences. Our results suggest that in the case of distantly related sequences, a single structure may not be enough for computing an accurate multiple sequence alignment.     

Prediction of beta-turns in proteins from multiple alignment using neural network

A neural network-based method has been developed for the prediction of beta-turns in proteins by using multiple sequence alignment. Two feed-forward back-propagation networks with a single hidden layer are used where the first-sequence structure network is trained with the multiple sequence alignment in the form of PSI-BLAST-generated position-specific scoring matrices. The initial predictions from the first network and PSIPRED-predicted secondary structure are used as input to the second structure-structure network to refine the predictions obtained from the first net. A significant improvement in prediction accuracy has been achieved by using evolutionary information contained in the multiple sequence alignment. The final network yields an overall prediction accuracy of 75.5% when tested by sevenfold cross-validation on a set of 426 nonhomologous protein chains. The corresponding Q(pred), Q(obs), and Matthews correlation coefficient values are 49.8%, 72.3%, and 0.43, respectively, and are the best among all the previously published beta-turn prediction methods. The Web server BetaTPred2 (http://www.imtech.res.in/raghava/betatpred2/) has been developed based on this approach.