Helicity of short E-R/K peptides

Understanding the secondary structure of peptides is important in protein folding, enzyme function, and peptide‐based drug design. Previous studies of synthetic Ala‐based peptides (>12 a.a.) have demonstrated the role for charged side chain interactions involving Glu/Lys or Glu/Arg spaced three (i, i + 3) or four (i, i + 4) residues apart. The secondary structure of short peptides (<9 a.a.), however, has not been investigated. In this study, the effect of repetitive Glu/Lys or Glu/Arg side chain interactions, giving rise to E‐R/K helices, on the helicity of short peptides was examined using circular dichroism. Short E‐R/K–based peptides show significant helix content. Peptides containing one or more E‐R interactions display greater helicity than those with similar E‐K interactions. Significant helicity is achieved in Arg‐based E‐R/K peptides eight, six, and five amino acids long. In these short peptides, each additional i + 3 and i + 4 salt bridge has substantial contribution to fractional helix content. The E‐R/K peptides exhibit a strongly linear melt curve indicative of noncooperative folding. The significant helicity of these short peptides with predictable dependence on number, position, and type of side chain interactions makes them an important consideration in peptide design.     

ATP as effector of inorganic pyrophosphatase of <Emphasis Type="Italic">Escherichia coli</Emphasis>. The role of residue Lys112 in binding effectors

It has been shown that PP_i, methylenediphosphonate, and ATP act as effectors of Escherichia coli inorganic pyrophosphatase (E-PPase), and that they compete for binding at the allosteric regulatory site. On the basis of chemical modification and computer modeling of a structure of the enzyme-ATP complex, a number of amino acid residues presumably involved in binding effectors has been revealed. Mutant variants Lys112Gln, Lys112Gln/Lys148Gln, and Lys112Gln/Lys115Ala of E-PPase have been obtained, as well as a modified variant of wild type E-PPase (^Adwt PPase) with a derivative of ATP chemically attached to the amino group of Lys146. Kinetic properties of these variants have been investigated and compared to the earlier described variants Lys115Ala, Arg43Gln, and Lys148Gln. Analysis of the data confirms the proposed location of an effector binding site in a cluster of positively charged amino acid residues including the side chains of Arg43, Lys146 (subunit A), Lys112, and Lys115 (subunit B). Lys112 is supposed to play a key role in forming contacts with the phosphate groups of the three studied effectors. Published in Russian in Biokhimiya, 2007, Vol. 72, No. 1, pp. 118–127.     

ω‐Turn: A novel β‐turn mimic in globular proteins stabilized by main‐chain to side‐chain CH···O interaction

Mimicry of structural motifs is a common feature in proteins. The 10‐membered hydrogen‐bonded ring involving the main‐chain C?O in a β‐turn can be formed using a side‐chain carbonyl group leading to Asx‐turn. We show that the N? H component of hydrogen bond can be replaced by a C^γ‐H group in the side chain, culminating in a nonconventional C? H···O interaction. Because of its shape this β‐turn mimic is designated as ω‐turn, which is found to occur ～three times per 100 residues. Three residues (i to i + 2) constitute the turn with the C? H···O interaction occurring between the terminal residues, constraining the torsion angles ?_{i + 1}, ψ_{i + 1}, ?_{i + 2} and χ′_{1(i + 2)} (using the interacting C^γ atom). Based on these angles there are two types of ω‐turns, each of which can be further divided into two groups. C^β‐branched side‐chains, and Met and Gln have high propensities to occur at i + 2; for the last two residues the carbonyl oxygen may participate in an additional interaction involving the S and amino group, respectively. With Cys occupying the i + 1 position, such turns are found in the metal‐binding sites. N‐linked glycosylation occurs at the consensus pattern Asn‐Xaa‐Ser/Thr; with Thr at i + 2, the sequence can adopt the secondary structure of a ω‐turn, which may be the recognition site for protein modification. Location between two β‐strands is the most common occurrence in protein tertiary structure, and being generally exposed ω‐turn may constitute the antigenic determinant site. It is a stable scaffold and may be used in protein engineering and peptide design. Proteins 2015; 83:203–214. © 2014 Wiley Periodicals, Inc.     

Conformational studies of a bicyclic,lactam‐constrained parathyroid hormone‐related protein‐derived agonist

The N‐terminal 1–34 segments of both parathyroid hormone (PTH) and parathyroid hormone‐related protein (PTHrP) bind and activate the same membrane receptor in spite of major differences in their amino acid sequence. The hypothesis was made that they share the same bioactive conformation when bound to the receptor. A common structural motif in all bioactive fragments of the hormone in water/trifluoroethanol mixtures or in aqueous solution containing detergent micelles is the presence of two helical segments at the N‐ and C‐termini of the sequence. In order to stabilize the helical structures, we have recently synthesized and studied the PTHrP(1–34) analog [(Lys13–As p¹⁷, Lys26–As p³⁰)]PTHrP(1–34)NH₂, which contains lactam‐constrained Lys‐Asp side chains at positions i, i+4. This very potent agonist exhibits enhanced helix stability with respect to the corresponding linear peptide and also two flexible sites at positions 12 and 19 in 1:1 trifluoroethanol/water. These structural elements have been suggested to play a critical role in bioactivity. In the present work we have extended our conformational studies on the bicyclic lactam‐constrained analog to aqueous solution. By CD, 2D‐NMR and structure calculations we have shown that in water two helical segments are present in the region of the lactam bridges (13–18, and 26–31) with high flexibility around Gly¹² and Arg¹⁹. Thus, the essential structural features observed in the aqueous‐organic medium are maintained in water even if, in this solvent, the overall structure is more flexible. Our findings confirm the stabilizing effect of side‐chain lactam constraints on the α‐helical structure. Copyright © 1999 European Peptide Society and John Wiley & Sons, Ltd.     

N‐terminal diproline and charge group effects on the stabilization of helical conformation in alanine‐based short peptides: CD studies with water and methanol as solvent

Protein folding problem remains a formidable challenge as main chain, side chain and solvent interactions remain entangled and have been difficult to resolve. Alanine‐based short peptides are promising models to dissect protein folding initiation and propagation structurally as well as energetically. The effect of N‐terminal diproline and charged side chains is assessed on the stabilization of helical conformation in alanine‐based short peptides using circular dichroism (CD) with water and methanol as solvent. A1 (Ac–Pro–Pro–Ala–Lys–Ala–Lys–Ala–Lys–Ala–NH₂) is designed to assess the effect of N‐terminal homochiral diproline and lysine side chains to induce helical conformation. A2 (Ac–Pro–Pro–Glu–Glu–Ala–Ala–Lys–Lys–Ala–NH₂) and A3 (Ac–d Pro–Pro–Glu–Glu–Ala–Ala–Lys–Lys–Ala–NH₂) with N‐terminal homochiral and heterochiral diproline, respectively, are designed to assess the effect of Glu...Lys (i , i  + 4) salt bridge interactions on the stabilization of helical conformation. The CD spectra of A1 , A2 and A3 in water manifest different amplitudes of the observed polyproline II (PPII) signals, which indicate different conformational distributions of the polypeptide structure. The strong effect of solvent substitution from water to methanol is observed for the peptides, and CD spectra in methanol evidence A2 and A3 as helical folds. Temperature‐dependent CD spectra of A1 and A2 in water depict an isodichroic point reflecting coexistence of two conformations, PPII and β‐strand conformation, which is consistent with the previous studies. The results illuminate the effect of N‐terminal diproline and charged side chains in dictating the preferences for extended‐β, semi‐extended PPII and helical conformation in alanine‐based short peptides. The results of the present study will enhance our understanding on stabilization of helical conformation in short peptides and hence aid in the design of novel peptides with helical structures. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.     

Conformation of the flexible bent helix of Leu1-zervamicin in crystal C and a possible gating action for ion passage

The membrane channel-forming polypeptide, Leu¹-zervamicin, Ac-Leu-Ile-Gln-Iva-Ile⁵-Thr-Aib-Leu-Aib-Hyp¹⁰-Gln-Aib-Hyp-Aib-Pro¹⁵-Phol (Aib: α-aminoisobutyric acid; Iva: isovaline; Hyp: 4-hydroxyproline; Phol: phenylalininol) has been analyzed by x-ray diffraction in a third crystal form. Although the bent helix is quite similar to the conformations found in crystals A and B, the amount of bending is more severe with a bending angle ≈ 47°. The water channel formed by the convex polar faces of neighboring helices is larger at the mouth than in crystals A and B, and the water sites have become disordered. The channel is interrupted in the middle by a hydrogen bond between the OH of Hyp (10) and the NH₂ of the Gln (11) of a neighboring molecule. The side chain of Gln (11) is wrapped around the helix backbone in an unusual fashion in order that it can augment the polar side of the helix. In the present crystal C there appears to be an additional conformation for the Gln (11) side chain (with ≈ 20% occupancy) that opens the channel for possible ion passage. Structure parameters for C₈₅H₁₄₀N₁₈O₂₂ · xH₂O · C₂H₅OH are space group P2₁2₁2₁, a = 10.337(2) Å, b = 28.387(7) Å, c = 39.864(11) Å, Z = 4, agreement factor R = 12.99% for 3250 data observed > 3σ(F), resolution = 1.2 Å. © 1994 John Wiley & Sons, Inc.     

Asparagine and glutamine differ in their propensities to form specific side chain-backbone hydrogen bonded motifs in proteins

Short range side chain‐backbone hydrogen bonded motifs involving Asn and Gln residues have been identified from a data set of 1370 protein crystal structures (resolution ≤ 1.5 Å). Hydrogen bonds involving residues i ? 5 to i + 5 have been considered. Out of 12,901 Asn residues, 3403 residues (26.4%) participate in such interactions, while out of 10,934 Gln residues, 1780 Gln residues (16.3%) are involved in these motifs. Hydrogen bonded ring sizes (C_n, where n is the number of atoms involved), directionality and internal torsion angles are used to classify motifs. The occurrence of the various motifs in the contexts of protein structure is illustrated. Distinct differences are established between the nature of motifs formed by Asn and Gln residues. For Asn, the most highly populated motifs are the C₁₀ (CO^δ_i …NH_{i + 2}), C₁₃ (CO^δ_i …NH_{i + 3}) and C₁₇ (N^δH_i …CO_{i ? 4}) structures. In contrast, Gln predominantly forms C₁₆ (CO^ε_i …NH_{i ? 3}), C₁₂ (N^εH_i …CO_{i ? 2}), C₁₅ (N^εH_i …CO_{i ? 3}) and C₁₈ (N^εH_i …CO_{i ? 4}) motifs, with only the C₁₈motif being analogous to the Asn C₁₇structure. Specific conformational types are established for the Asn containing motifs, which mimic backbone β‐turns and α‐turns. Histidine residues are shown to serve as a mimic for Asn residues in side chain‐backbone hydrogen bonded ring motifs. Illustrative examples from protein structures are considered. Proteins 2012; © 2011 Wiley Periodicals, Inc.     

Molecular dynamics simulations of a winter flounder “antifreeze” polypeptide in aqueous solution

A winter flounder antifreeze polypeptide (HPLC-6) has been studied in vacuo and in aqueous solution using molecular dynamics computer simulation techniques. The helical conformation of this polypeptide was found to be stable both in vacuum and in solution. The major stabilizing interactions were found to be the main-chain hydrogen bonds, a salt-bridge interaction, and solute–solvent hydrogen bonds. A significant bending in the middle of the polypeptide chain was observed both in vacuo and in solvent at 300 K. Possible causes of the bending are discussed. From simulations of mutant polypeptide molecules in vacuo, it is concluded that the bend in the native polypeptide was caused by side chain to backbone hydrogen bond competition involving the Thr 24 side chain and facilitated by strains on the helix resulting from the Lys 18-Glu 22 salt bridge. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of an ionizable polyhexapeptide collagen model

Poly(Lys(HBr)-Gly-Pro-Pro-Gly-Pro) has been synthesized and studied by circular dichroism (CD) spectroscopy. It is apparently the first polyhexapeptide collagen model reported with an ionizable side chain. The monomer (ε-(p-nitrobenzyloxycarbonyl)-Lys-Gly-Pro-Pro-Gly-Pro-p-nitrophenyl-ester) was prepared by a stepwise strategy employing active esters. Polymerization in N,N-dimethyl formamide, followed by removal of the Lys side chain protection with HBr/acetic acid, gave a polydisperse product. Fractionation was accomplished by gel filtration chromatography. The polydisperse material had a molecular weight (M_r = 5–17,000). High molecular weight fractions from triple helices under concentrated conditions at 2°C. The triple helical structure gives a CD pattern very similar to that of collagen and its triple helical analogs. However, unlike collagen, the polyhexapeptide undergoes spontaneous dissociation at temperatures substantially below the melting temperature from a triple helical form to single chains. This process is promoted at low concentrations, high temperature, neutral pH, and low molecular weight, and is apparently due, in large part, to unfavorable ionic side-chain interactions. In addition to this relatively slow “ionic” dissociation the triple helical polypeptide may be thermally dissociated in a manner similar to collagen. The thermal denaturation is a relatively fast process compared with ionic dissociation. A high molecular weight fraction (3 × M_r = 48,000) was found to melt at 42°C at neutral pH but increased to 54°C at pH 12 where the lysyl side chains are predominantly deprotonated. Furthermore, reconstitution of triple helices appeared to be more readily achieved at high pH. Thus it is concluded that ionic repulsion between side chains causes destabilization of the triple helix and hinders reconstitution.     

13C Nuclear magnetic resonance study of salt induced conformational change of basic polypeptides: Poly (L-lysine), poly (L-arginine), and poly (L-ornithine)

A ¹³C-nmr study of the salt-induced helix–coil transition of the basic polypeptides poly(L -lysine) [(Lys)_n], poly(L -arginine) [(Arg)_n], and poly (L -ornithine) [(Orn)_n] was performed to serve as a reference of the helical portion of histones and other proteins. As is the case with pH-induced helix–coil transition, the downfield displacement of the C^α and carbonyl carbon signals are observed in the helical state. The upfield shift of the C^β signals, on the other hand, is noted in the salt-induced transition. Regardless of the differences in the side chains and also the salts used, very similar helix-induced chemical shifts are obtained for (Lys)_n and (Arg)_n. However, the displacement of the C^α, C^β, and carbonyl carbons of (Orn)n in the presence of 4M NaClO₄ is found to be almost 50% of that of (Lys)_n and (Arg)_n. This is explained by the fact that the maximum helical content is about 50%, consistent with the ORD result. Further, the motion of the backbone and side chains of the helical from was estimated by measuring the spin-lattice relaxation time (T₁), nuclear Overhauser enhancement (NOE), and line width. In the case of (Lys)_n, the motion of the side chains is charged very little in comparison with that of the random coil. Indicating that the aggregation of the salt-induced helix is small in contrast to that of the pH-induced helix. For (Arg)_n, however, the precipitate of the helical polymers is mainly due to aggregation.     

Characterization of a type of β‐bend ribbon spiral generated by the repeating (Xaa–Yaa–Aib–Pro) motif: The solution structure of harzianin HC IX,a 14‐residue peptaibol forming voltage‐dependent ion channels

The three‐dimensional solution structure of harzianin HC IX, a peptaibol antibiotic isolated from the fungus Trichoderma harzianum, was determined using CD, homonuclear, and heteronuclear two‐dimensional nmr spectroscopy combined with molecular modeling. This 14‐residue peptide, Ac Aib¹ Asn² Leu³ Aib⁴ Pro⁵ Ala⁶ Ile⁷ Aib⁸ Pro⁹ Iva¹⁰ Leu¹¹ Aib¹² Pro¹³ Leuol¹⁴ (Aib, α‐aminoisobutyric acid; Iva, isovaline; Leuol, leucinol), is a main representative of a short‐sequence peptaibol class characterized by an acetylated N‐terminus, a C‐terminal amino alcohol, and the presence of three Aib‐L ‐Pro motifs at positions 4–5, 8–9, and 12–13, separated by two dipeptide units. In spite of a lower number of residues, compared to the 18/20‐residue peptaibols such as alamethicin, harzianin HC IX exhibits remarkable membrane‐perturbing properties. It interacts with phospholipid bilayers, increasing their permeability and forming voltage‐gated ion channels through a mechanism slightly differing from that proposed for alamethicin. Sequence‐specific ¹H‐ and ¹³C‐nmr assignments and conformational nmr parameters (³J_NHCαH coupling constants, quantitative nuclear Overhauser enhancement data, temperature coefficients of amide and carbonyl groups, NH–ND exchange rates) were obtained in methanol solution. Sixty structures were calculated based on 98 interproton distance restraints and 6 Φ dihedral angle restraints, using high temperature restrained molecular dynamics and energy minimization. Thirty‐seven out of the sixty generated structures were consistent with the nmr data and were convergent. The peptide backbone consists in a ribbon of overlapping β‐turns twisted into a continuous spiral from Asn² to Leuol¹⁴ and forming a 26 Å long helix‐like structure. This structure is slightly amphipathic, with the three Aib–Pro motifs aligned on the less hydrophobic face of the spiral where the Asn² side chain is also present, while the more hydrophobic bulky side chains of leucines, isoleucine, isovaline, and leucinol are located on the concave side. The repetitive (Xaa–Yaa–Aib–Pro) tetrapeptide subunit, making up the peptide sequence, is characterized by four sets of (Φ,Ψ) torsional angles, with the following mean values: Φ_i = −90°, Ψ_i = −27°; Φ_i+1 = −98°, Ψ_i+1 = −17°; Φ_i+2 = −49°, Ψ_i+2 = −50°; Φ_i+3 = −78°, Ψ_i+3 = +3°. We term this particular structure, specifically occurring in the case of (Xaa–Yaa–Aib–Pro)_n sequences, the (Xaa–Yaa–Aib–Pro)‐β‐bend ribbon spiral. It is stabilized by 4 → 1 intramolecular hydrogen bonds and differs from both the canonical 3₁₀‐helix made of a succession of type III β‐turns and from the β‐bend ribbon spiral that has been described in the case of (Aib–Pro)n peptide segments. © 1999 John Wiley & Sons, Inc. Biopoly 50: 71–85, 1999     

Effect of side chain length on intrahelical interactions between carboxylate- and guanidinium-containing amino acids

The charge-containing hydrophilic functionalities of encoded charged amino acids are linked to the backbone via different numbers of hydrophobic methylenes, despite the apparent electrostatic nature of protein ion pairing interactions. To investigate the effect of side chain length of guanidinium- and carboxylate-containing residues on ion pairing interactions, α-helical peptides containing Zbb–Xaa (i, i + 3), (i, i + 4) and (i, i + 5) (Zbb = carboxylate-containing residues Aad, Glu, Asp in decreasing length; Xaa = guanidinium residues Agh, Arg, Agb, Agp in decreasing length) sequence patterns were studied by circular dichroism spectroscopy (CD). The helicity of Aad- and Glu-containing peptides was similar and mostly pH independent, whereas the helicity of Asp-containing peptides was mostly pH dependent. Furthermore, the Arg-containing peptides consistently exhibited higher helicity compared to the corresponding Agp-, Agb-, and Agh-containing peptides. Side chain conformational analysis by molecular mechanics calculations showed that the Zbb–Xaa (i, i + 3) and (i, i + 4) interactions mainly involved the χ ₁ dihedral combinations (g+, g+) and (g?, g+), respectively. These low energy conformations were also observed in intrahelical Asp–Arg and Glu–Arg salt bridges of natural proteins. Accordingly, Asp and Glu provides variation in helix characteristics associated with Arg, but Aad does not provide features beyond those already delivered by Glu. Importantly, nature may have chosen the side chain length of Arg to support helical conformations through inherent high helix propensity coupled with stabilizing intrahelical ion pairing interactions with the carboxylate-containing residues.     

Alpha helix capping in synthetic model peptides by reciprocal side chain–main chain interactions: Evidence for an N terminal “capping box”

A significant fraction of the amino acids in proteins are alpha helical in conformation. Alpha helices in globular proteins are short, with an average length of about twelve residues, so that residues at the ends of helices make up an important fraction of all helical residues. In the middle of a helix, H-bonds connect the NH and CO groups of each residue to partners four residues along the chain. At the ends of a helix, the H-bond potential of the main chain remains unfulfilled, and helix capping interactions involving bonds from polar side chains to the NH or CO of the backbone have been proposed and detected. In a study of synthetic helical peptides, we have found that the sequence Ser-Glu-Asp-Glu stabilizes the alpha helix in a series of helical peptides with consensus sequences. Following the report by Harper and Rose, which identifies SerXaaXaaGlu as a member of a class of common motifs at the N termini of alpha helices in proteins that they refer to as “capping boxes,” we have reexamined the side chain–main chain interactions in a varient sequence using ¹H NMR, and find that the postulated reciprocal side chain-backbone bonding between the first Ser and last Glu side chains and their peptide NH partners can be resolved: Deletion of two residues N terminal to the Ser-Glu-Asp-Glu sequence in these peptides has no effect on the initiation of helical structure, as defined by two-dimensional (2D) NMR experiments on this variant. Thus the capping box sequence Ser-Glu-Asp-Glu inhibits N terminal fraying of the N terminus of alpha helix in these peptides, and shows the side chain–main chain interactions proposed by Harper and Rose. It thus acts as a helix initiating signal. Since normal a helix cannot propagate beyond the N terminus of this structure, the box acts as a termination signal in this direction as well. © 1994 John Wiley & Sons, Inc.     

Positional dependence of the effects of negatively charged Glu side chains on the stability of two-stranded α-helical coiled-coils

The effects on protein stability of negatively charged Glu side chains at different positions along the length of the α-helix were investigated in the two-stranded α-helical coiled-coil. A native coiled-coil has been designed which consists of two identical 35 residue polypeptide chains with a heptad repeat Q_gV_aG_bA_cL_dQ_eK_f and a Cys residue at position 2 to allow the formation of an interchain 2-2′ disulphide bridge. This coiled-coil contains no intra- or interchain electrostatic interactions and served as a control for peptides in which Glu was substituted for Gln in the e or g heptad positions. The effect of the substitutions on stability was determined by urea denaturation at 20°C with the degree of unfolding monitored by circular dichroism spectroscopy. A Glu substituted for Gln near the N-terminus in each chain of the coiled-coil stabilizes the coiled-coil at pH 7, consistent with the charge–helix dipole interaction model. This stability increase is modulated by pH change and the addition of salt (KCl or guanidine hydrochloride), confirming the electrostatic nature of the effect. In contrast, Glu substitution in the middle of the helix destabilizes the coiled-coil because of the lower helical propensity and hydrophobicity of Glu compared with Gln at pH 7. Taking the intrinsic differences into account, the apparent charge–helix dipole interaction at the N-terminus is approximately 0.35 kcal/mol per Glu substitution. A Glu substitution at the C-terminus destabilizes the coiled-coil more than in the middle owing to the combined effects of intrinsic destabilization and unfavourable charge–helix dipole interaction with the negative pole of the helix dipole. The estimated destabilizing charge–helix dipole interaction of 0.08 kcal/mol is smaller than the stabilizing interaction at the N-terminus. The presence of a 2-2′disulphide bridge appears to have little influence on the magnitude of the charge–helix dipole interactions at either end of the coiled-coil. © 1997 European Peptide Society and John Wiley & Sons, Ltd.     

Probing the influence of sequence-dependent interactions upon α-helix stability in alanine-based linear peptides

The observation that short, linear alanine-based polypeptides form stable α-helices in aqueous solution has allowed the development of well-defined experimental systems with which to study the influence of amino acid sequence upon the stability of secondary structure. We have performed detailed conformational searches upon six alanine-based peptides in order to rationalize the observed variation in the α-helical stability in terms of side-chain-backbone and side-chain-side-chain interactions. Although a simple, gas-phase, potential model was used to obtain the conformational energies for these peptides, good agreement was obtained with experiment regarding their relative α-helical stabilities. Our calculations clearly indicate that valine, isoleucine, and phenylalanine residues should destabilize the α-helical conformation when included within alanine-based peptides because of energetically unfavorable side-chain-backbone interactions, which tend to result in the formation of regions of 3₁₀-helix. In the case of valine, the destabilization most probably arises from entropic effects as the isopropyl side chain can assume more orientations in the 3₁₀-helical form of the peptide. A detailed examination of very short-range interactions in these peptides has also indicated that an interaction, involving fewer than five consecutive residues, whose stabilizing effect reinforces that of the (i, i + 4) hydrogen bond may be the basis of the requirement for increased nucleation (σ) and propagation parameters (s) required by Zimm–Bragg theory to predict the α-helical content for compounds in this class of short peptides. Our calculations complement recent work using modified Zimm–Bragg and Lifson–Roig theories of the helix–coil transition, and are consistent with molecular dynamics simulations upon linear peptides in aqueous solution. © 1993 John Wiley & Sons, Inc.     

Quantitative two-dimensional nmr study of dermenkephalin,a highly potent and selective δ-opioid peptide

Dermenkephalin, H-Tyr-(D ) Met-Phe-His-Leu-Met-Asp-NH₂, a highly potent and selective δ-opioid peptide isolated from frog skin, was studied in DMSO-d₆ solution by two-dimensional nmr spectroscopy, including the determination of NH temperature coefficients, the evaluation of ³J coupling constants from phase-sensitive correlated spectroscopy (COSY) and the volumes of nuclear Overhauser effect (NOE) correlations. The two-dimensional NOE spectroscopy (NOESY) spectrum of dermenkephalin revealed sequential, medium-, and long-range effects. To put this information on a quantitative basis, special attention was devoted to J cross-peak suppression, quantification of the NOE volumes and analysis of the overlaps, normalization of the NOEs against diagonal peaks and H_ββ′ geminal interactions. Although most of the dihedral angles deduced from the ³J_Nα coupling constants together with several N_iα_i and α_iN_{i + 1} NOEs pointed to a partially extended peptide backbone, several N_i N_{i + 1} NOEs and β_i N_{i + 1} interactions argued in favor of a folded structure. Moreover, several long-range correlations of strong intensities were found that supported a close spatial proximity between the side chains of D -Met² and Met⁶, Tyr¹ and His⁴, Tyr¹ and Asp⁷, and His⁴ and the C-terminal amide group. In Phe, the g^? rotamer in the side chain is deduced from the ³J_αβ coupling constants and αβ and Nβ NOE correlations. Whereas the amide proton dependency was not indicative of stable hydrogen bonds, the nonuniform values of the temperature coefficient may reflect an equilibrium mixture of folded and extended conformers. The overall data should provide realistic starting models for energy minimization and modelization studies. © 1993 John Wiley & Sons, Inc.     

Etude par spectroscopie infrarouge de la transformation hélice–chaîne statistique des polypeptides. II. Etude de l'interaction de quelques polypeptides à chaînes latérales polaires avec l'acide trifluoracétique

The various polymer–acid solvation possibilities occuring in the helix–coil transition process of polypeptides with polar side chains were systematically analyzed by infrared spectroscopy. The following samples have been considered: poly-γ-benzyl-L -glutamate (PBLG), alternating poly-γ-benzyl-D ,L -glutamate (PBD-LG), and poly-β-benzyl-L -as-partate (PBLA). The behavior of the amide A, I, II, and νC?O ester absorptions of each polymer dissolved in trifluoroacetic acid–chloroform mixtures was studied in depth. The classical assumptions concerning the interaction between a polypeptide and a proton donor solvent are discussed. This interaction was previously proposed in a theoretical model of helix–coil transition. For PBLG, the spectral characteristics of the cooperative transition are evidenced by the amide bands. These bands also show main chain–acid hydrogen bonding (I) Quantitative analysis of phenomenon (I) was performed in order to localize the “binding sites” of the polymer. In agreement with the theory, only the complexation of peptide units belonging to random coil and terminal helical regions were observed. However, in contrast to the theory in which the association constants KCO and KNH of these residues are generally kept equal, the present results have shown that the main binding site is the carbonyl group (KNH ? 0 or « KCO ). The behavior of the polar side chains of these polypeptides were analyzed during the transition. Similarly to the peptide backbone, they bind the acid by hydrogen bonding (II) Furthermore, this association is more important when the side chains are localized in the coiled regions than in the helical ones. This result suggests, by analogy with the main chain behavior, that the helix–coil transition theory should take into account two more association constants for polar side chains, namely k₁ for the helical regions and k₂ > k₁ for the coiled ones.     

Packing interactions of aib-containing helices: Molecular modeling of parallel dimers of simple hydrophobic helices and of alamethicin

α-Aminoisobutyric acid (Aib) is a helicogenic α,α-dimethyl amino acid found in channel-forming peptaibols such as alamethicin. Possible effects of Aib on helix–helix packing are analyzed. Simulated annealing via restrained molecular dynamics is used to generate ensembles of approximately parallel helix dimers. Analysis of variations in geometrical and energetic parameters within ensembles defines how tightly a pair of helices interact. Simple hydrophobic helix dimers are compared: Ala₂₀, Leu₂₀, Aib₂₀, and P20, the latter a simple channel-forming peptide [G. Menestrina, K. P. Voges, G, Jung, and G. Boheim (1986) Journal of Membrane Biology, Vol. 93, pp. 111–132]. Ala₂₀ and Leu₂₀ dimers exhibit well-defined ridges-in-grooves packing with helix crossing angles (Ω) of the order of +20°. Aib₂₀ α-helix dimers are much more loosely packed, as evidenced by a wide range of Ω values and small helix-helix interaction energies. However, when in a 3₁₀ conformation Aib₂₀ helices pack in three well-defined parallel modes, with Ω ca. ?15°, +5°, and 10°. Comparison of helix–helix interaction energies suggests that dimerization may favor the 3₁₀ conformation. P20, with 8 Aib residues, also shows looser packing of α-helices. The results of these studies of hydrophobic helix dimers are analyzed in the context of the ridges-in-grooves packing model. Simulations are extended to dimers of alamethicin, and of an alamethicin derivative in which all Aib residues are replaced by Leu. This substitution has little effect on helix–helix packing. Rather, such interactions appear to be sensitive to interactions between polar side chains. Overall, the results suggest that Aib may modulate the packing of simple hydrophobic helices, in favor of looser interactions. For more complex amphipathic helices, interactions between polar side chains may be more critical. © 1995 John Wiley & Sons, Inc.     

General method for calculating helical parameters of polymer chains from bond lengths,bond angles,and internal-rotation angles

Helical conformations of infinite polymer chains may be described by the helical parameters, d and θ (the translation along the helix axis and the angle of rotation about the axis per repeat unit), _pi (the distance of the ith atom from the axis), d_ij, and d_ij (the translation along the axis and the angle of rotation, respectively, on passing from the ith atom to the jth). A general method has been worked out for calculating all those helical parameters from the bond lengths, bond angles, and internal-rotation angles. The positions of the main chain and side chain atoms with respect to the axis may also be calculated. All the equations are applicable to any helical polymer chain and are readily programmed for electronic computers. A method is also presented for calculating the partial derivatives of helical parameters with respect to molecular parameters.     

Stereochemistry of Schellman motifs in peptides: Crystal structure of a hexapeptide with a C‐terminus 6 → 1 hydrogen bond

The Schellman motif is a widely observed helix terminating structural motif in proteins, which is generated when the C‐terminus residue adopts a left‐handed helical (α_L) conformation. The resulting hydrogen‐bonding pattern involves the formation of an intramolecular 6 → 1 interaction. This helix terminating motif is readily mimicked in synthetic helical peptides by placing an achiral residue at the penultimate position of the sequence. Thus far, the Schellman motif has been characterized crystallographically only in peptide helices of length 7 residues or greater. The structure of the hexapeptide Boc–Pro–Aib–Gly–Leu–Aib–Leu–OMe in crystals reveal a short helical stretch terminated by a Schellman motif, with the formation of 6 → 1 C‐terminus hydrogen bond. The crystals are in the space group P2₁2₁2₁ with a = 18.155(3) Å, b = 18.864(8) Å, c = 11.834(4) Å, and Z = 4 . The final R₁ and wR₂ values are 7.68 and 14.6%, respectively , for 1524 observed reflections [F_o ≥ 3ς(F_o)]. A 6 → 1 hydrogen bond between Pro(1)CO · · · Leu(6)NH and a 5 → 2 hydrogen bond between Aib(2)CO · · · Aib(5)NH are observed. An analysis of the available oligopeptides having an achiral Aib residue at the penultimate position suggests that chain length and sequence effects may be the other determining factors in formation of Schellman motifs. © 1999 John Wiley & Sons, Inc. Biopoly 50: 13–22, 1999