Structural Analysis of Sindbis Virus Capsid Mutants Involving Assembly and Catalysis

Sindbis virus core protein (SCP) has been isolated from virus and crystallized. The X-ray crystallographic structure showed that the amino-terminal 113 residues appeared to be either disordered or truncated during crystallization and that the carboxy-terminal residues 114 to 264 had a chymotrypsin-like structure. The carboxy-terminal residues 106 to 264 and 106 to 266 of SCP have now been expressed inEscherichia coli. Most crystal forms of the truncated proteins were isomorphous with those of the virally extracted protein. There are only small structural differences between the truncated recombinant protein and the ordered part of the wild-type virus-extracted protein. Hence,E. coli-expressed SCP can be used to study proteolytic properties and the contribution of SCP to nucleocapsid assembly, interaction with the E2 glycoprotein and interaction with RNA.The same dimer that was found in two different crystal forms of the virus-extracted SCP was present also in some of the crystals of the truncated recombinant protein. The monomer – monomer interface is maintained by two pairs of hydrogen bonds and by hydrophobic interactions. Removal of the hydrogen bonds by single substitutions did not prevent dimer formation. However, a mutation that reduced the hydrophobic contacts did inhibit dimer formation.The wild-type truncated SCP is active inE. coli, as evidenced by proteolytic processing of a series of progressively longer precursors that extend beyond residue 264. Unlike the virus-extracted capsid protein, theE. coli-expressed SCP described here is terminated following the carboxy-terminal residue and, therefore, does not require autocatalysis. Nevertheless, theE. coli-expressed protein folds with the carboxy-terminal tryptophan residue in the specificity pocket. Two crystallographically independent molecules of SCP(106 to 266), which had two additional downstream residues and had the essential S215 mutated to alanine, showed two distinct modes of binding the uncleaved carboxy-terminal residues. These may represent successive steps of binding substrate prior to catalytic cleavage.Refinement of the various crystal structures of SCP showed that the amino-terminal arm from residues 107 to 113 was not disordered, but is associated with neighboring molecules. Residues 108 to 111 bind into a hydrophobic pocket composed primarily of Y180, W247 and F166. It had been shown that the double mutant (Y180S; E183G), with the Y180S substitution in this pocket, produced a large number of non-infectious virions, possibly because of modification in the interaction of the glycoprotein spikes with core proteins. The crystal structure of this double mutant showed that there was a large positional change in the side-chain of W247, which moved into the space created by the replacement of Y180 with serine. These conformational changes may alter the stability of the virion and, thus, regulate its functional requirements during cell entry.     

Conformational stability of dimeric and monomeric forms of the C-terminal domain of human immunodeficiency virus-1 capsid protein

The unfolding equilibrium of the C-terminal domain of human immunodeficiency virus-1 (HIV-1) capsid protein has been analyzed by circular dichroism and fluorescence spectroscopy. The results for the dimeric, natural domain are consistent with a three-state model (N(2)<-->2I<-->2U). The dimer (N(2)) dissociates and partially unfolds in a coupled cooperative process, into a monomeric intermediate (I) of very low conformational stability. This intermediate, which is the only significantly populated form at low (1 microM) protein concentrations, fully preserves the secondary structure but has lost part of the tertiary (intramonomer) interactions found in the dimer. In a second transition, the intermediate cooperatively unfolds into denatured monomer (U). The latter process is the equivalent of a two-state unfolding transition observed for a monomeric domain in which Trp184 at the dimer interface had been truncated to Ala. A highly conserved, disulfide-bonded cysteine, but not the disulfide bond itself, and three conserved residues within the major homology region of the retroviral capsid are important for the conformational stability of the monomer. All these residues are involved also in the association process, despite being located far away from the dimerization interface. It is proposed that dimerization of the C-terminal domain of the HIV-1 capsid protein involves induced-fit recognition, and the conformational reorganization also improves substantially the low intrinsic stability of each monomeric half.     

Insight into the activity of SARS main protease: Molecular dynamics study of dimeric and monomeric form of enzyme

The phenomenon that SARS coronavirus main protease (SARS M(pro)) dimer is the main functional form has been confirmed by experiment. However, because of the absence of structural information of the monomer, the reasons for this remain unknown. To investigate it, two molecular dynamics (MD) simulations in water for dimer and monomer models have been carried out, using the crystal structure of protomer A of the dimer as the starting structure for the monomer. During the MD simulation of dimer, three interest phenomena of protomer A have been observed: (i) the distance between NE2 of His41 and SG of Cys145 averages 3.72 A, which agrees well with the experimental observations made by X-ray crystallography; (ii) His163 and Glu166 form the "tooth" conformational properties, resulting in the specificity for glutamine at substrate P1 site; and (iii) the substrate-binding pocket formed by loop 140-146 and loop 184-197 is large enough to accommodate the substrate analog. However, during the MD simulation of the monomer complex, the three structural characteristics are all absent, which results directly in the inactivation of the monomer. Throughout the MD simulation of the dimer, the N-terminus of protomer B forms stable hydrogen bonds with Phe140 and Glu166, through which His163, Glu166, and loop 140-146 are kept active form. Furthermore, a water-bridge has been found between the N-terminus of protomer B and Gly170, which stabilizes His172 and avoids it moving toward Tyr161 to disrupt the H-bond between Tyr161 and His163, stabilizing the conformation of His163. The interactions between the N-terminus and another monomer maintain the activity of dimer.     

Mammalian SCAN domain dimer is a domain-swapped homolog of the HIV capsid C-terminal domain

Retroviral assembly is driven by multiple interactions mediated by the Gag polyprotein, the main structural component of the forming viral shell. Critical determinants of Gag oligomerization are contained within the C-terminal domain (CTD) of the capsid protein, which also harbors a conserved sequence motif, the major homology region (MHR), in the otherwise highly variable Gag. An unexpected clue about the MHR function in retroviral assembly emerges from the structure of the zinc finger-associated SCAN domain we describe here. The SCAN dimer adopts a fold almost identical to that of the retroviral capsid CTD but uses an entirely different dimerization interface caused by swapping the MHR-like element between the monomers. Mutations in retroviral capsid proteins and functional data suggest that a SCAN-like MHR-swapped CTD dimer forms during immature particle assembly. In the SCAN-like dimer, the MHR contributes the major part of the large intertwined dimer interface explaining its functional significance.     

Semliki forest virus core protein fragmentation: Its possible role in nucleocapsid disassembly

Semliki Forest virus (SFV) envelope proteins function as proton pores under mildly acidic conditions and translocate protons across the viral membrane [Schlegel, A., Omar, A., Jentsch, P., Morell, A. and Kemp, F. C. (1991) Biosci. Rep. 11, 243–255]. As a consequence, during uptake of SFV by cells via receptor-mediated endocytosis the nucleocapsid is supposed to be exposed to protons. In this paper the effects of mildly acidic pH on SFV nucleocapsids were examined. A partial proteolytic fragmentation of core proteins was observed when nucleocapsids were exposed to mildly acidic pH. A similar proteolytic event was detected when intact SFV virions were exposed to identical conditions. Protease protection assays with exogenous bromelain provided evidence that the capsid protein degradation was due to an endogenous proteolytic activity and not to a proteolytic contamination. Detergent solubilization of virus particles containing degraded nucleocapsids followed by sucrose gradient centrifugation led to a separation of capsid protein fragments and remaining nucleocapsids. These data are discussed in terms of a putative biological significance, namely that the core protein fragmentation may play a role in nucleocapsid disassembly.     

Crystal structure of cyclophilin A complexed with a binding site peptide from the HIV-1 capsid protein.

The cellular protein, cyclophilin A (CypA), is incorporated into the virion of the type 1 human immunodeficiency virus (HIV-1) via a direct interaction with the capsid domain of the viral Gag polyprotein. We demonstrate that the capsid sequence 87His-Ala-Gly-Pro-Ile-Ala92 (87HAGPIA92) encompasses the primary cyclophilin A binding site and present an X-ray crystal structure of the CypA/HAGPIA complex. In contrast to the cis prolines observed in all previously reported structures of CypA complexed with model peptides, the proline in this peptide, Pro 90, binds the cyclophilin A active site in a trans conformation. We also report the crystal structure of a complex between CypA and the hexapeptide HVGPIA, which also maintains the trans conformation. Comparison with the recently determined structures of CypA in complexes with larger fragments of the HIV-1 capsid protein demonstrates that CypA recognition of these hexapeptides involves contacts with peptide residues Ala(Val) 88, Gly 89, and Pro 90, and is independent of the context of longer sequences.     

Retrovirus capsid protein assembly arrangements

During retrovirus particle assembly and morphogenesis, the retrovirus structural (Gag) proteins organize into two different arrangements: an immature form assembled by precursor Gag (PrGag) proteins; and a mature form, composed of proteins processed from PrGag. Central to both Gag protein arrangements is the capsid (CA) protein, a domain of PrGag, which is cleaved from the precursor to yield a mature Gag protein composed of an N-terminal domain (NTD), a flexible linker region, and a C-terminal domain (CTD). Because Gag interactions have proven difficult to examine in virions, a number of investigations have focused on the analysis of structures assembled in vitro. We have used electron microscope (EM) image reconstruction techniques to examine assembly products formed by two different CA variants of both human immunodeficiency virus type 1 (HIV-1) and the Moloney murine leukemia virus (M-MuLV). Interestingly, two types of hexameric protein arrangements were observed for each virus type. One organizational scheme featured hexamers composed of putative NTD dimer subunits, with sharing of subunits between neighbor hexamers. The second arrangement used apparent NTD monomers to coordinate hexamers, involved no subunit sharing, and employed putative CTD interactions to connect hexamers. Conversion between the two assembly forms may be achieved by making or breaking the proposed symmetric NTD dimer contacts in a process that appears to mimic viral morphogenesis.     

Dimeric rous sarcoma virus capsid protein structure relevant to immature Gag assembly

The structure of the N-terminal domain (NTD) of Rous sarcoma virus (RSV) capsid protein (CA), with an upstream 25 amino acid residue extension corresponding to the C-terminal portion of the Gag p10 protein, has been determined by X-ray crystallography. Purified Gag proteins of retroviruses can assemble in vitro into virus-like particles closely resembling in vivo-assembled immature virus particles, but without a membrane. When the 25 amino acid residues upstream of CA are deleted, Gag assembles into tubular particles. The same phenotype is observed in vivo. Thus, these residues act as a “shape determinant” promoting spherical assembly, when they are present, or tubular assembly, when they are absent. We show that, unlike the NTD on its own, the extended NTD protein has no β-hairpin loop at the N terminus of CA and that the molecule forms a dimer in which the amino-terminal extension forms the interface between monomers. Since dimerization of Gag has been inferred to be a critical step in assembly of spherical, immature Gag particles, the dimer interface may represent a structural feature that is essential in retrovirus assembly.     

Synthesis and processing of Semliki forest virus polyprotein in Saccharomyces cerevisiae: a yeast type glycosylation of E1 envelope protein

A cDNA coding for the structural proteins of Semliki Forest virus (SFV) was ligated between the ADC1 promoter and terminator in a yeast expression vector, pAAH5. Synthesis of the SFV-specific proteins in Saccharomyces cerevisiae transformed with this vector was shown by immunoblotting and immunoprecipitation. Detection of the N-terminal and the C-terminal components of the viral polyprotein, capsid protein and E1 envelope protein, respectively, suggested that the entire polyprotein was translated in yeast. The capsid protein was effectively released from the polyprotein as a normal size polypeptide, but the following protein, p62 (E3, E2 precursor) was not detected, suggesting that it was rapidly degraded. Electrophoretic analyses indicated that the final protein, E1, entered the secretory pathway, the signal sequence was cleaved off and the protein became extensively and heterogeneously glycosylated. These data suggest that E1 was transported to the Golgi complex and that yeast-characteristic outer-chain glycans were added to the protein.     

The crystal structure of the C-terminal fragment of yeast Hsp40 Ydj1 reveals novel dimerization motif for Hsp40

The molecular chaperone Hsp40 functions as a dimer. The dimer formation is critical for Hsp40 molecular chaperone activity to facilitate Hsp70 to refold non-native polypeptides. We have determined the crystal structure of the C-terminal fragment of yeast Hsp40 Ydj1 that is responsible for Ydj1 dimerization by MAD method. The C-terminal fragment of Ydj1 comprises of the domain III of Ydj1 and the Ydj1 C-terminal dimerization motif. The crystal structure indicates that the dimerization motif of type I Hsp40 Ydj1 differs significantly from that of yeast type II Hsp40. The C terminus of type I Hsp40 Ydj1 from one monomer forms beta-strands with the domain III from the other monomer in the homo-dimer. The L372 from Ydj1 C terminus inserts its side-chain into a hydrophobic pocket on domain III. The modeled full-length Ydj1 dimer structure reveals that a large cleft is formed between the two monomers. The domain IIs of Ydj1 monomers that contain the zinc-finger motifs points directly against each other.     

Alphavirus capsid protein helix I controls a checkpoint in nucleocapsid core assembly

The assembly of the alphavirus nucleocapsid core has been investigated using an in vitro assembly system. The C-terminal two-thirds of capsid protein (CP), residues 81 to 264 in Sindbis virus (SINV), have been previously shown to have all the RNA-CP and CP-CP contacts required for core assembly in vitro. Helix I, which is located in the N-terminal dispensable region of the CP, has been proposed to stabilize the core by forming a coiled coil in the CP dimer formed by the interaction of residues 81 to 264. We examined the ability of heterologous alphavirus CPs to dimerize and form phenotypically mixed core-like particles (CLPs) using an in vitro assembly system. The CPs of SINV and Ross River virus (RRV) do not form phenotypically mixed CLPs, but SINV and Western equine encephalitis virus CPs do form mixed cores. In addition, CP dimers do not form between SINV and RRV in these assembly reactions. In contrast, an N-terminal truncated SINV CP (residues 81 to 264) forms phenotypically mixed CLPs when it is assembled with full-length heterologous CPs, suggesting that the region that controls the mixing is present in the N-terminal 80 residues. Furthermore, this result suggests that the dimeric interaction, which was absent between SINV and RRV CPs, can be restored by the removal of the N-terminal 80 residues of the SINV CP. We mapped the determinant that is responsible for phenotypic mixing onto helix I by using domain swapping experiments. Thus, discrimination of the CP partner in alphavirus core assembly appears to be dependent on helix I sequence compatibility. These results suggest that helix I provides one of the important interactions during nucleocapsid core formation and may play a regulatory role during the early steps of the assembly process.     

Expression of Semliki Forest virus capsid protein from SV40 recombinant virus

Here, the proteolytic processing of the Semliki Forest virus (SFV) capsid protein was studied in the absence of other viral functions. Two different fragments of the SFV messenger cDNA, coding for capsid protein and 174 and 38 extra amino acids from the envelope proteins, respectively, were cloned in the late region of the SV40 viral DNA. Cells infected with the SV40 recombinant virus stocks were analyzed for the production of SFV capsid mRNA and polypeptide. Immunofluorescence staining of the infected cells indicated that the produced SFV capsid protein accumulated mainly in the nucleus. Polyacrylamide gel electrophoresis of the immunoprecipitated SFV capsid proteins showed that both recombinants yielded a labelled band equivalent in size to the SFV capsid protein. Thus the proteolytic processing takes place even under conditions where the capsid protein is the only virus-specified protein synthesized.     

Conformational equilibria and rates of localized motion within hepatitis B virus capsids

Functional analysis of hepatitis B virus (HBV) core particles has associated a number of biological roles with the C terminus of the capsid protein. One set of functions require the C terminus to be on the exterior of the capsid, while others place this domain on the interior. According to the crystal structure of the capsid, this segment is strictly internal to the capsid shell and buried at a protein-protein interface. Using kinetic hydrolysis, a form of protease digestion assayed by SDS-PAGE and mass spectrometry, the structurally and biologically important C-terminal region of HBV capsid protein assembly domain (Cp149, residues 1-149) has been shown to be dynamic in both dimer and capsid forms. HBV is an enveloped virus with a T = 4 icosahedral core that is composed of 120 copies of a homodimer capsid protein. Free dimer and assembled capsid forms of the protein are readily hydrolyzed by trypsin and thermolysin, around residues 127-128, indicating that this region is dynamic and exposed to the capsid surface. The measured conformational equilibria have an opposite temperature dependence between free dimer and assembled capsid. This work helps to explain the previously described allosteric regulation of assembly and functional properties of a buried domain. These observations make a critical connection between structure, dynamics, and function: made possible by the first quantitative measurements of conformational equilibria and rates of conversion between protein conformers for a megaDalton complex.     

Crystal Structure of Aura Virus Capsid Protease and Its Complex with Dioxane: New Insights into Capsid-Glycoprotein Molecular Contacts

The nucleocapsid core interaction with endodomains of glycoproteins plays a critical role in the alphavirus life cycle that is essential to virus budding. Recent cryo-electron microscopy (cryo-EM) studies provide structural insights into key interactions between capsid protein (CP) and trans-membrane glycoproteins E1 and E2. CP possesses a chymotrypsin-like fold with a hydrophobic pocket at the surface responsible for interaction with glycoproteins. In the present study, crystal structures of the protease domain of CP from Aura virus and its complex with dioxane were determined at 1.81 and 1.98 Å resolution respectively. Due to the absence of crystal structures, homology models of E1 and E2 from Aura virus were generated. The crystal structure of CP and structural models of E1 and E2 were fitted into the cryo-EM density map of Venezuelan equine encephalitis virus (VEEV) for detailed analysis of CP-glycoprotein interactions. Structural analysis revealed that the E2 endodomain consists of a helix-loop-helix motif where the loop region fits into the hydrophobic pocket of CP. Our studies suggest that Cys397, Cys418 and Tyr401 residues of E2 are involved in stabilizing the structure of E2 endodomain. Density map fitting analysis revealed that Pro405, a conserved E2 residue is present in the loop region of the E2 endodomain helix-loop-helix structure and makes intermolecular hydrophobic contacts with the capsid. In the Aura virus capsid protease (AVCP)-dioxane complex structure, dioxane occupies the hydrophobic pocket on CP and structurally mimics the hydrophobic pyrollidine ring of Pro405 in the loop region of E2.     

Biophysical Analysis of the MHR Motif in Folding and Domain Swapping of the HIV Capsid Protein C-Terminal Domain

Infection by human immunodeficiency virus (HIV) depends on the function, in virion morphogenesis and other stages of the viral cycle, of a highly conserved structural element, the major homology region (MHR), within the carboxyterminal domain (CTD) of the capsid protein. In a modified CTD dimer, MHR is swapped between monomers. While no evidence for MHR swapping has been provided by structural models of retroviral capsids, it is unknown whether it may occur transiently along the virus assembly pathway. Whatever the case, the MHR-swapped dimer does provide a novel target for the development of anti-HIV drugs based on the concept of trapping a nonnative capsid protein conformation. We have carried out a thermodynamic and kinetic characterization of the domain-swapped CTD dimer in solution. The analysis includes a dissection of the role of conserved MHR residues and other amino acids at the dimerization interface in CTD folding, stability, and dimerization by domain swapping. The results revealed some energetic hotspots at the domain-swapped interface. In addition, many MHR residues that are not in the protein hydrophobic core were nevertheless found to be critical for folding and stability of the CTD monomer, which may dramatically slow down the swapping reaction. Conservation of MHR residues in retroviruses did not correlate with their contribution to domain swapping, but it did correlate with their importance for stable CTD folding. Because folding is required for capsid protein function, this remarkable MHR-mediated conformational stabilization of CTD may help to explain the functional roles of MHR not only during immature capsid assembly but in other processes associated with retrovirus infection. This energetic dissection of the dimerization interface in MHR-swapped CTD may also facilitate the design of anti-HIV compounds that inhibit capsid assembly by conformational trapping of swapped CTD dimers.     

The crystal structure of the human hepatitis B virus capsid.

Hepatitis B is a small enveloped DNA virus that poses a major hazard to human health. The crystal structure of the T = 4 capsid has been solved at 3.3 A resolution, revealing a largely helical protein fold that is unusual for icosahedral viruses. The monomer fold is stabilized by a hydrophobic core that is highly conserved among human viral variants. Association of two amphipathic alpha-helical hairpins results in formation of a dimer with a four-helix bundle as the major central feature. The capsid is assembled from dimers via interactions involving a highly conserved region near the C terminus of the truncated protein used for crystallization. The major immunodominant region lies at the tips of the alpha-helical hairpins that form spikes on the capsid surface.     

MS2噬菌体衣壳蛋白与包装位点结合特异性及其生物学应用进展

MS2噬菌体为正义单链RNA噬菌体,基因组含有3569个核苷酸,编码成熟酶蛋白、衣壳蛋白、复制酶蛋白和裂解蛋白。MS2噬菌体复制酶编码基因5'端一个由19个碱基组成的茎环结构(又称包装位点)是衣壳蛋白二聚体与RNA相互作用的部位,二者相互作用形成的复合物是启动噬菌体自我包装的信号。MS2噬菌体衣壳蛋白与包装位点结合的特异性已被应用于RNA病毒核酸检测的标准物质、校准品和质控品的研究,实时动态监测活细胞内RNA的运动,以及RNA体内递送载体的研究等领域。     

The structure of the bovine protein tyrosine phosphatase dimer reveals a potential self-regulation mechanism.

The bovine protein tyrosine phosphatase (BPTP) is a member of the class of low-molecular weight protein tyrosine phosphatases (PTPases) found to be ubiquitous in mammalian cells. The catalytic site of BPTP contains a CX(5)R(S/T) phosphate-binding motif or P-loop (residues 12-19) which is the signature sequence for all PTPases. Ser19, the final residue of the P-loop motif, interacts with the catalytic Cys12 and participates in stabilizing the conformation of the active site through interactions with Asn15, also in the P-loop. Mutations at Ser19 result in an enzyme with altered kinetic properties with changes in the pK(a) of the neighboring His72. The X-ray structure of the S19A mutant enzyme shows that the general conformation of the P-loop is preserved. However, changes in the loop containing His72 result in a displacement of the His72 side chain that may explain the shift in the pK(a). In addition, it was found that in the crystal, the protein forms a dimer in which Tyr131 and Tyr132 from one monomer insert into the active site of the other monomer, suggesting a dual-tyrosine motif on target sites for this enzyme. Since the activity of this PTPase is reportedly regulated by phosphorylation at Tyr131 and Tyr132, the structure of this dimer may provide a model of a self-regulation mechanism for the low-molecular weight PTPases.