Mutations in the "lid" region affect chain length specificity and thermostability of a Pseudomonas fragi lipase

The cold-adapted Pseudomonas fragi lipase (PFL) displays highest activity on short-chain triglyceride substrates and is rapidly inactivated at moderate temperature. Sequence and structure comparison with homologous lipases endowed with different substrate specificity and stability, pointed to three polar residues in the lid region, that were replaced with the amino acids conserved at equivalent positions in the reference lipases. Substitutions at residues T137 and T138 modified the lipase chain-length preference profile, increasing the relative activity towards C8 substrates. Moreover, mutations conferred to PFL higher temperature stability. On the other hand, replacement of the serine at position 141 by glycine destabilized the protein.     

Activity and enantioselectivity of wildtype and lid mutated Candida rugosa lipase isoform 1 in organic solvents

The activity and enantioselectivity of lipase 1 from Candida rugosa and of a chimera enzyme obtained by replacing the lid of isoform 1 with the lid of isoform 3 were compared in organic solvents. The alcoholysis of chloro ethyl 2-hydroxy hexanoate with methanol and of vinyl acetate with 6-methyl-5-hepten-2-ol were used as model reactions in different reaction conditions. The chimera enzyme was less active and enantioselective than the wildtype in all the conditions tested. A rationale for such decreases could be that the chimera lipase has a lower proportion of enzyme molecules in the open form. This might lead to a hindered access to the enzyme active site, thus affecting the catalytic activity.     

Biocatalyst engineering exerts a dramatic effect on selectivity of hydrolysis catalyzed by immobilized lipases in aqueous medium

It has been found that enantioselectivity of lipases is strongly modified when their immobilization is performed by involving different areas of the enzyme surface, by promoting a different degree of multipoint covalent immobilization or by creating different environments surrounding different enzyme areas. Moreover, selectivity of some immobilized enzyme molecules was much more modulated by the experimental conditions than other derivatives. Thus, some immobilized derivatives of Candida rugosa (CRL) and C. antarctica-B (CABL) lipases are hardly enantioselective in the hydrolysis of chiral esters of (R,S)-mandelic acid under standard conditions (pH 7.0 and 25°C) (E<2). However, other derivatives of the same enzymes exhibited a very good enantioselectivity under nonstandard conditions. For example, CRL adsorbed on PEI-coated supports showed a very high enantio-preference towards S-isomer (E=200) at pH 5. On the other hand, CABL adsorbed on octyl-agarose showed an interesting enantio-preference towards the R-isomer (E=25) at pH 5 and 4°C. These biotransformations are catalyzed by isolated lipase molecules acting on fully soluble substrates and in the absence of interfacial activation against external hydrophobic interfaces. Under these conditions, lipase catalysis may be associated to important conformational changes that can be strongly modulated via biocatalyst and biotransformation engineering. In this way, selective biotransformations catalyzed by immobilized lipases in macro-aqueous systems can be easily modulated by designing different immobilized derivatives and reaction conditions.     

Improved catalytic properties of immobilized lipases by the presence of very low concentrations of detergents in the reaction medium

The addition of a very small concentration of a detergent (in many instances under the critical micellar concentration (cmc)) has been found to greatly increase the activity of immobilized lipases, using those from Pseudomonas fluorescens (PFL) and Candida antarctica (isoform B) as model enzymes. However, the detergents may also have a negative effect on enzyme activity; in fact, for all enzyme preparations and substrates the activity/detergent concentration curve reached a maximum value and started to decrease, in many instances even under the initial value. The concentration and nature of the detergent (SDS, CTAB, Triton X-100, or X-45) that permitted the maximum hyperactivation was different depending on the substrate. The best hyperactivation values promoted by the presence of detergent were over a 20-fold factor. The presence of detergents permitted the inhibition of lipases by irreversible covalent inhibitors (e.g., 4-(2-aminoethyl)benzenesulfonyl fluoride hydrochloride) (AEBSF) while the enzyme, in the absence of detergent, is not inhibited by these irreversible inhibitors. This suggested that the main effect of the detergents is to shift the conformational equilibrium of lipases toward the open form. Moreover, the presence of detergents also permitted to improve the enantioselectivity exhibited by the immobilized lipases in some cases. For example, the enantioselectivity of PFL-glyoxyl agarose increased from 40 to more than 100 in the hydrolysis of (+/-)-2-hydroxy-4-phenylbutyric acid ethyl ester by using 0.1% CTAB.     

Sequence of the lid affects activity and specificity of Candida rugosa lipase isoenzymes

The fungus Candida rugosa produces multiple lipase isoenzymes (CRLs) with distinct differences in substrate specificity, in particular with regard to selectivity toward the fatty acyl chain length. Moreover, isoform CRL3 displays high activity towards cholesterol esters. Lipase isoenzymes share over 80% sequence identity but diverge in the sequence of the lid, a mobile loop that modulates access to the active site. In the active enzyme conformation, the open lid participates in the substrate-binding site and contributes to substrate recognition. To address the role of the lid in CRL activity and specificity, we substituted the lid sequences from isoenzymes CRL3 and CRL4 in recombinant rCRL1, thus obtaining enzymes differing only in this stretch of residues. Swapping the CRL3 lid was sufficient to confer to CRL1 cholesterol esterase activity. On the other hand, a specific shift in the chain-length specificity was not observed. Chimeric proteins displayed different sensitivity to detergents in the reaction medium.     

Influence of precursors and additives on microbial lipases stabilized by sol-gel entrapment

Sol-gel entrapment of microbial lipases from Candida cylindracea (Cc lipase), Pseudomonas fluorescens (Lipase AK), and Pseudomonas cepacia (Lipase PS), using as precursors tetraethoxysilane (TEOS) and silanes of type R-Si(OEt)₃ with alkyl or aryl R groups, has been investigated. Three different methods using these precursors were tried exhibiting protein immobilization yields in the range of 20-50%. Hydrolysis of emulsified olive oil, esterification of lauric acid with 1-octanol and enantioselective acylation of 2-pentanol have been used as model reactions for testing the properties of the encapsulated lipases. The recovery yields of the enzyme activity in the esterification reaction were between 20-68%, the best performance being achieved with phenyltriethoxysilane and tetraethoxysilane precursors at 3:1 molar ratio. When testing the entrapped Lipase AK in the enantioselective acylation reaction of 2-pentanol, activity recovery yields up to 32% related to the free enzyme were obtained and the immobilization increased the enantioselectivity of the enzyme.     

Esterification of 2-methylalkanoic acids Catalysed by Lipase from Candida rugosa: Enantioselectivity as a Function of water Activity and Alcohol Chain Length

Esterifications catalysed by immobilised lipase from Candida rugosa (CRL) in cyclohexane at constant water activity (a_w = 0.76) were studied using 2-methyl substituted octa-, nona- or decanoic acids and n-alcohols of varying chain length as substrates. The importance of controlling the water activity and choosing the right alcohol for obtaining maximum enantioselectivity is demonstrated. The immobilised lipase was easily recovered without loss of activity and enantioselectivity.     

Engineering surface hydrophobicity improves activity of Bacillus thermocatenulatus lipase 2 enzyme

Bacillus thermocatenulatus lipase 2 (BTL2) is a promising industrial enzyme used in biodiesel production. Although BTL2 has high thermostability and good resistance to organic solvents, the activity of BTL2 is suboptimal for industrial processes. To improve BTL2 activity, we engineered BTL2 lipase by modulating hydrophobicity of its lid domain. Through site‐directed mutagenesis, we constructed three mutants, namely Y225F+S232A, S232A+T236V and Q185L, to cover all uncharged hydrophilic amino acids within the lid domain. Activities of these mutants were characterized. Our findings suggest that one mutant (Y225F+S232A) showed ～35% activity increase in catalyzing heterogeneous hydrolytic reactions relevant for industrial applications. A mathematical framework was established to account for different molecular events that contribute to the observed apparent catalytic activities. Increases in hydrophobicity of lid domains were associated with increased interfacial adsorption of lipases and lower molecular enzymatic activities. The measured apparent activities of lipases include contributions from both events. Lid hydrophobicity can thus result in different changes in lipase activities depending on the mutation site. Our work demonstrates the feasibility of increasing BTL2 activity by modulating the hydrophobicity of lid domains and provides some guidelines for further improving BTL2 activity.     

The cold-active lipase of Pseudomonas fragi. Heterologous expression, biochemical characterization and molecular modeling.

A recombinant lipase cloned from Pseudomonas fragi strain IFO 3458 (PFL) was found to retain significant activity at low temperature. In an attempt to elucidate the structural basis of this behaviour, a model of its three-dimensional structure was built by homology and compared with homologous mesophilic lipases, i.e. the Pseudomonas aeruginosa lipase (45% sequence identity) and Burkholderia cepacia lipase (38%). In this model, features common to all known lipases have been identified, such as the catalytic triad (S83, D238 and H260) and the oxyanion hole (L17, Q84). Structural modifications recurrent in cold-adaptation, i.e. a large amount of charged residues exposed at the protein surface, have been detected. Noteworthy is the lack of a disulphide bridge conserved in homologous Pseudomonas lipases that may contribute to increased conformational flexibility of the cold-active enzyme.     

Lipolytic enzymes with improved activity and selectivity upon adsorption on polymeric nanoparticles

Nanostructured polystyrene (PS) and polymethylmethacrylate (PMMA) were used as carriers for the preparation of bioconjugates with lipolytic enzymes, such as Candida rugosa lipase (CRL) and Pseudomonas cepacia lipase (PCL). Simple addition of the lipase solution to the polymeric nanoparticles under protein-friendly conditions (pH 7.6) led to the formation of polymer-enzyme bioconjugates. Energy filtered-transmission electron microscopy (EF-TEM) performed on immuno-gold labeled samples revealed that the enzyme preferentially binds to the polymer nanoparticles and that the binding does not affect the nanostructured features of the carriers. The studies performed on the activity of the bioconjugates pointed out that the lipases adsorbed onto polymeric nanoparticles show an improved performance in terms of activity and selectivity with respect to those shown by lipases adsorbed on the same non-nanostructured carriers. The residual activities of CRL and PCL immobilized on nanostructured PMMA and PS reached 60% and 74%, respectively. Moreover, we found that enantioselectivity and pH and thermal stability increase upon immobilization. These results highlight the fact that new protein conformers with improved enantioselectivity stabilized after adsorption on nanoparticles are obtained. On the basis of the chemical structures of the selected polymers and the slopes of the adsorption isotherms, a hydrophobic binding model for lipase/nanostructured polymers is suggested.     

Lipases fromRhizomucor miehei andHumicola lanuginosa: Modification of the lid covering the active site alters enantioselectivity

The homologous lipases fromRhizomucor miehei andHumicola lanuginosa showed approximately the same enantioselectivity when 2-methyldecanoic acid esters were used as substrates. Both lipases preferentially hydrolyzed theS-enantiomer of 1-heptyl 2-methyldecanoate (R. miehei:E _S =8.5;H. lanuginosa:E _S =10.5), but theR-enantiomer of phenyl 2-methyldecanoate (E _R =2.9). Chemical arginine specific modification of theR. miehei lipase with 1,2-cyclohexanedione resulted in a decreased enantioselectivity (E _R =2.0), only when the phenyl ester was used as a substrate. In contrast, treatment with phenylglyoxal showed a decreased enantioselectivity (E _S =2.5) only when the heptyl ester was used as a substrate. The presence of guanidine, an arginine side chain analog, decreased the enantioselectivity with the heptyl ester (E _S =1.9) and increased the enantioselectivity with the aromatic ester (E _R =4.4) as substrates. The mutation, Glu 87 Ala, in the lid of theH. lanuginosa lipase, which might decrease the electrostatic stabilization of the open-lid conformation of the lipase, resulted in 47% activity compared to the native lipase, in a tributyrin assay. The Glu 87 Ala mutant showed an increased enantioselectivity with the heptyl ester (E _S =17.4) and a decreased enantioselectivity with the phenyl ester (E _R =2.5) as substrates, compared to native lipase. The enantioselectivities of both lipases in the esterification of 2-methyldecanoic acid with 1-heptanol were unaffected by the lid modifications.     

脂肪酶活性部位上的盖与界面活性

脂肪酶是一种非常重要的水解酶,在工业催化、医药和科学研究等领域中有广泛应用. 大部分脂肪酶的活性部位上方有一段被称为“盖”的α-螺旋,这种盖赋予脂肪酶在水/油界面上有特殊的催化活性,界面活性.而在单一水相或油相中却表现出低活性或无活性.界面活性与盖的组成、大小、构象及其存在环境等密切相关,探明盖与脂肪酶界面活性的关系对于脂肪酶的开发和利用是非常关键的.因此,长期以来人们对盖在脂肪酶催化作用中所扮演的角色进行了孜孜不倦的探索.本文从盖的构象、移动、组成和删除等方面综述了其对脂肪酶催化作用的影响,期望对人们认识脂肪酶盖与其催化作用之间的关系有一定的帮助.     

Immobilization of lipase by salts and the transesterification activity in hexane

Lipases from six different sources were immobilized on Celite and five types of salt. The transesterification activities in hexane for lipases immobilized on EDTA-Na₂ increased by 463% for the lipase from Candida rugosa (CRL), 2700% for the lipase from Candida sp. (CSL) and 1215% for the lipase from Pseudomonas sp. (PSL), compared to the salt-free enzyme. With 0.5% sucrose for CRL or 1% sorbitol for PSL as the lyoprotectant during lyophilization process, transesterification activity increased by 100% and 13%, respectively, compared to the immobilized enzyme on EDTA-Na₂ without lyoprotectant.     

Immobilization of lipases for non-aqueous synthesis

Immobilization of lipases involves many levels of complications relating to the structure of the active site and its interactions with the immobilization support. Interaction of the so called hydrophobic ‘lid’ with the support has been reported to affect synthetic activity of an immobilized lipase. In this work we evaluate and compare the synthetic activity of lipases from different sources immobilized on different kinds of supports with varying hydrophobicity. Humicola lanuginosa lipase, Candida antarctica lipase B and Rhizomucor miehei lipase were physically adsorbed onto two types of hydrophobic carriers, namely hydrophilic carriers with conjugated hydrophobic ligands, and supports with base matrix hydrophobicity. The prepared immobilized enzymes were used for acylation of n-butanol with oleic acid as acyl donor in iso-octane with variable water content (0–2.8%, v/v) as reaction medium. Enzyme activity and effect of water on the activity of the immobilized derivatives were compared with those of respective soluble lipases and a commercial immobilized lipase Novozyme 435. Both R. miehei and H. lanuginosa immobilized lipases showed maximum activity at 1.39% (v/v) added water concentration. Sepabeads, a methacrylate based hydrophilic support with conjugated octadecyl chain showed highest immobilized esterification (synthetic) activity for all three enzymes, and of the three R. miehei lipase displayed maximum esterification activity comparable to the commercial enzyme.     

Lipase-catalysed hydrolysis of short-chain substrates in solution and in emulsion: a kinetic study

We have studied the enzymatic hydrolysis of solutions and emulsions of vinyl propionate, vinyl butyrate and tripropionin by lipases of various origin and specificity. Kinetic studies of the hydrolysis of short-chain substrates by microbial triacylglycerol lipases from Rhizopus oryzae, Mucor miehei, Candida rugosa, Candida antarctica A and by (phospho)lipase from guinea-pig pancreas show that these lipolytic enzymes follow the Michaelis–Menten model. Surprisingly, the activity against solutions of tripropionin and vinyl esters ranges from 70% to 90% of that determined against emulsions. In contrast, a non-hyperbolic (sigmoidal) dependence of enzyme activity on ester concentration is found with human pancreatic lipase, triacylglycerol lipase from Humicola lanuginosa (Thermomyces lanuginosa) and partial acylglycerol lipase from Penicillium camembertii and the same substrates. In all cases, no abrupt jump in activity (interfacial activation) is observed at substrate concentration corresponding to the solubility limit of the esters. Maximal lipolytic activity is always obtained in the presence of emulsified ester. Despite progress in the understanding of structure–function of lipases, interpretation of the mode of action of lipases active against solutions of short-chain substrates remains difficult. Actually, it is not known whether these enzymes, which possess a lid structure, are in open or/and closed conformation in the bulk phase and whether the opening of the lid that gives access to the catalytic triad is triggered by interaction of the enzyme molecule with monomeric substrates or/and multimolecular aggregates (micelles) both present in the bulk phase. From the comparison of the behaviour of lipases used in this study which, in some cases, follow the Michaelis–Menten model and, in others, deviate from classical kinetics, it appears that the activity of classical lipases against soluble short-chain vinyl esters and tripropionin depends not only on specific interaction with single substrate molecules at the catalytic site of the enzyme but also on physico-chemical parameters related to the state of association of the substrate dispersed in the aqueous phase. It is assumed that the interaction of lipase with soluble multimolecular aggregates of tripropionin or short-chain vinyl esters or the formation of enzyme–substrate mixed micelles with ester bound to lipase, might represent a crucial step that triggers the structural transition to the open enzyme conformation by displacement of the lid.     

Lipase-catalysed hydrolysis of short-chain substrates in solution and in emulsion: a kinetic study.

We have studied the enzymatic hydrolysis of solutions and emulsions of vinyl propionate, vinyl butyrate and tripropionin by lipases of various origin and specificity. Kinetic studies of the hydrolysis of short-chain substrates by microbial triacylglycerol lipases from Rhizopus oryzae, Mucor miehei, Candida rugosa, Candida antarctica A and by (phospho)lipase from guinea-pig pancreas show that these lipolytic enzymes follow the Michaelis-Menten model. Surprisingly, the activity against solutions of tripropionin and vinyl esters ranges from 70% to 90% of that determined against emulsions. In contrast, a non-hyperbolic (sigmoidal) dependence of enzyme activity on ester concentration is found with human pancreatic lipase, triacylglycerol lipase from Humicola lanuginosa (Thermomyces lanuginosa) and partial acylglycerol lipase from Penicillium camembertii and the same substrates. In all cases, no abrupt jump in activity (interfacial activation) is observed at substrate concentration corresponding to the solubility limit of the esters. Maximal lipolytic activity is always obtained in the presence of emulsified ester. Despite progress in the understanding of structure-function of lipases, interpretation of the mode of action of lipases active against solutions of short-chain substrates remains difficult. Actually, it is not known whether these enzymes, which possess a lid structure, are in open or/and closed conformation in the bulk phase and whether the opening of the lid that gives access to the catalytic triad is triggered by interaction of the enzyme molecule with monomeric substrates or/and multimolecular aggregates (micelles) both present in the bulk phase. From the comparison of the behaviour of lipases used in this study which, in some cases, follow the Michaelis-Menten model and, in others, deviate from classical kinetics, it appears that the activity of classical lipases against soluble short-chain vinyl esters and tripropionin depends not only on specific interaction with single substrate molecules at the catalytic site of the enzyme but also on physico-chemical parameters related to the state of association of the substrate dispersed in the aqueous phase. It is assumed that the interaction of lipase with soluble multimolecular aggregates of tripropionin or short-chain vinyl esters or the formation of enzyme-substrate mixed micelles with ester bound to lipase, might represent a crucial step that triggers the structural transition to the open enzyme conformation by displacement of the lid.     

Lipase-catalyzed remote kinetic resolution of arylic nitriles with adjacent quaternary chiral center and the determination of their absolute configuration

Enzymatic resolution of tertiary arylic nitrile alcohols (1–8) by lipases from Pseudomonas cepacia (PCL), Pseudomonas flurescens (LAK, made by Amano Enzyme Co. Ltd.), Pseudomonas fluorescens (PFL) and Candida rugosa (CRL) were described, and the absolute configuration of the resolved chiral alcohols (1–8) were determined by chemical transformations to the compounds with known configuration.     

Hydrolytic resolution of (R,S)-naproxen 2,2,2-trifluoroethyl thioester by Carica papaya lipase in water-saturated organic solvents

For the first time, the Carica papaya lipase (CPL) stored in crude papain is explored as a potential enantioselective biocatalyst for obtaining chiral acids from their racemic thioesters. Hydrolytic resolution of (R,S)-naproxen 2,2,2-trifluoroethyl thioester in water-saturated organic solvents is employed as a model system for studying the effects of temperature and solvents on lipase activity and enantioselectivity. An optimal temperature of 60 degrees C, based on the initial rate of (S)-thioester and a high enantiomeric ratio (i.e., E-value defined as the ratio of initial rates for both substrates) of >100 at 45 degrees C in isooctane, is obtained. Kinetic analysis, considering product inhibition and enzyme deactivation, is also performed, showing agreement between the experimental and best-fit conversions for (S)-thioester. A comparison of the kinetic and thermodynamic behaviors of CPL and Candida rugosa lipase (CRL) in isooctane and cyclohexane indicates that both lipases are very similar in terms of thermodynamic parameters DeltaDeltaH and DeltaDeltaS, initial rate of (S)-substrate, and E-value when (R,S)-naproxen 2,2,2-trifluoroethyl thioester or ester is employed as substrate.     

Facile modulation of enantioselectivity of thermophilic Geobacillus zalihae lipase by regulating hydrophobicity of its Q114 oxyanion

Site-directed mutagenesis of the oxyanion-containing amino acid Q114 in the recombinant thermophilic T1 lipase previously isolated from Geobacillus zalihae was performed to elucidate its role in the enzyme⿿s enantioselectivity and reactivity. Substitution of Q114 with a hydrophobic methionine to yield mutant Q114M increased enantioselectivity (3.2-fold) and marginally improved reactivity (1.4-fold) of the lipase in catalysing esterification of ibuprofen with oleyl alcohol. The improved catalytic efficiency of Q114L was concomitant with reduced flexibility in the active site while the decreased enantioselectivity of Q114L could be directly attributed to diminished electrostatic repulsion of the substrate carboxylate ion that rendered partial loss in steric hindrance and thus enantioselectivity. The highest E-values for both Q114L (E-value 14.6) and Q114M (E-value 48.5) mutant lipases were attained at 50 °C, after 12⿿16 h, with a molar ratio of oleyl alcohol to ibuprofen of 1.5:1 and at 2.0% (w/v) enzyme load without addition of molecular sieves. Pertinently, site-directed mutagenesis on the Q114 oxyanion of T1 resulted in improved enantioselectivity and such approach may be applicable to other lipases of the same family. We demonstrated that electrostatic repulsion phenomena could affect flexibility/rigidity of the enzyme-substrate complex, aspects vital for enzyme activity and enantioselectivity of T1.