Preparation of biodegradable chitin/gelatin membranes with GlcNAc for tissue engineering applications

Chitin is a natural biopolymer have been used for several biomedical applications due to its biodegradability and biocompatibility. By using the calcium solvent system, chitin regenerated hydrogel (RG) was prepared by using -chitin. And also, the swelling hydrogel (SG) was prepared by using β-chitin with water. Then, both RG and SG were mixed with gelatin and N-acetyl-d-(+)-glucosamine (GlcNAc) at 120 °C for 2 h. The chitin/gelatin membranes with GlcNAc were also prepared by using RG and SG with GlcNAc. The prepared chitin/gelatin membranes with or without GlcNAc were characterized by mechanical, swelling, enzymatic degradation, thermal and growth of NIH/3T3 fibroblast cell studies. The stress and elongation of chitin/gelatin membrane with GlcNAc prepared from RG was showed higher than the chitin/gelatin membranes without GlcNAc. But, the chitin/gelatin membranes prepared from SG with GlcNAc was showed higher stress and elongation than the chitin/gelatin membranes without GlcNAc. It is due to the crosslinking effect of GlcNAc. The chitin/gelatin membranes prepared from SG showed higher swelling than the chitin/gelatin membranes prepared from RG. In contrast, the chitin/gelatin membranes prepared from RG showed higher degradation than the chitin/gelatin membranes prepared from SG. And also, these chitin/gelatin membranes are showing good growth of NIH/3T3 fibroblast cell. So these novel chitin/gelatin membranes are useful for tissue engineering applications.     

Preparation and characterization of nano-hydroxyapatite/chitosan cross-linking composite membrane intended for tissue engineering

In this paper, a series of nano-hydroxyapatite(n-HA)/chitosan cross-linking composite membranes (n-HA; 0, 5, 10, 15, 20 and 30 wt%) were successfully developed by a simple casting/solvent evaporation method. n-HA with size about 20 nm in vertical diameter and about 100 nm in horizontal diameter was successfully synthesized by a hydro-thermal precipitation method, and then dispersed into chitosan/genipin solution with the aid of continuous ultrasound to develop n-HA/chitosan cross-linking composite membranes. The detailed characterizations including Fourier transform infrared spectroscopy (FTIR), X-ray diffractometer (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), water adsorption and tensile test were performed. With the analysis of FTIR spectra and TGA spectra, it suggested that there was existence of possible interactions between polymer and n-HA. Meanwhile, the n-HA content was greatly effected on the morphology as well as the tensile property of composite membrane. In vitro cytotoxicity test suggested that the developed n-HA/chitosan cross-linking composite membrane was non-cytotoxicity against L929 cells after 24 h's incubation might be suitable for further in vivo application.     

A novel composite scaffold for cardiac tissue engineering

Summary One approach to the engineering of functional cardiac tissue for basic studies and potential clinical use involves bioreactor cultivation of dissociated cells on a biomaterial scaffold. Our objective was to develop a scaffold that is (1) highly porous with large intereconnected pores (to facilitate mass transport), (2) hydrophilic (to enhance cell attachment), (3) structurally stable (to withstand the shearing forces during bioreactor cultivation), (4) degradable (to provide ultimate biocompatibility of the tissue graft), and (5) elastic (to enable transmission of contractile forces). The scaffold of choice was made as a composite of poly(Dl-lactide-co-caprolactone), poly(Dl-lactide-co-glycolide) (PLGA), and type I collagen, with open interconnected pores and the average void volume of 80±5%. Neonatal rat heart cells suspended in Matrigel were seeded into the scaffold at a physiologically high density (1.35×10⁸ cells/cm³) and cultivated for 8 d in cartridges perfused with culture medium or in orbitally mixed dishes (25 rpm); collagen sponge (Ultrafoam^⋆m) and PLGA sponge served as controls. Construct cellularity, presence of cardiac markers, and contractile properties were markedly improved in composite scaffolds as compared with both controls.     

Preparation and characterization of polyvinyl alcohol-gelatin hydrogel membranes for biomedical applications

The purpose of this research was to design and develop hydrogels by esterification of polyvinyl alcohol (PVA) with gelatin. The membranes were characterized by Fourier Transform Infrared (FTIR) spectroscopy, x-ray diffraction (XRD), and differential scanning calorimetry. The viscosity of the esterified product (as solution) was compared with the mixture of PVA and gelatin of the same composition. The mechanical properties of the hydrogels were characterized by tensile tests. Swelling behavior and hemocompatibility of the membrane were also evaluated. The diffusion coefficient of salicylic acid (SA), when the receptor compartment contained Ringer's solution, through the membrane was determined. SA was used as a model drug. FTIR spectra of the membranes indicated complete esterification of the free carboxylic groups of gelatin. XRD studies indicated that the crystallinity of the membranes was mainly due to gelatin. The comparison of viscosity indicated an increase in segment density within the molecular coil. The membrane had sufficient strength and water-holding capacity. Hemocompatibility suggested that the hydrogel could be tried as wound dressing and as an implantable drug delivery system. The diffusion coefficient of SA through the membrane was found to be 1.32×10⁻⁵ cm²/s. The experimental results indicated that the hydrogel could be tried for various biomedical applications. Published: March 16, 2007 Formerly College of Pharmacy, University of Delhi, Pushp Vihar, New Delhi-110017 India     

Novel chitin/nanosilica composite scaffolds for bone tissue engineering applications

Biopolymers like chitin are widely investigated as scaffolds in bone tissue engineering. Its properties like biocompatibility, biodegradability, non-toxicity, wound healing ability, antibacterial activity, hemostatic property, etc., are widely known. However, these materials are not much bioactive. Addition of material like silica can improve the bioactivity and biocompatibility of chitin. In this work, chitin composite scaffolds containing nanosilica were prepared using chitin hydrogel and their bioactivity, swelling ability and cytotoxicity was analyzed in vitro. These scaffolds were found to be bioactive in simulated body fluid (SBF) and biocompatible when tested with MG 63 cell line. These results suggest that chitin/nanosilica composite scaffolds can be useful for bone tissue engineering applications.     

Preparation and characterization of chitosan-carbon nanotube scaffolds for bone tissue engineering

In recent years, significant development has been given to chitosan for orthopedic application. In this study, we have prepared scaffolds with the use of low and high molecular weight chitosan with 0.0025%, 0.005% and 0.01% weight of f-multiwalled carbon nanotube (f-MWCNT) by freezing and lyophilization method and physiochemically characterized as bone graft substitutes. Fourier Transform Infrared Spectroscopy, X-Ray Diffraction Analysis, Thermal Gravimetric Analysis, Scanning Electron Microscopy and Optical Microscopy results indicated that the f-MWCNT was uniformly dispersed in chitosan matrix and there was a chemical interaction between chitosan and f-MWCNT. The water uptake ability and porosity of scaffolds increased with an increase the amount of f-MWCNT. The cell proliferation, protein content, alkaline phosphatase and mineralization of the composite scaffolds were higher than chitosan scaffold due to the addition of f-MWCNT. Herewith, we are suggesting that chitosan/f-MWCNT scaffolds are promising biomaterials for bone tissue engineering.     

Preparation and properties of starch acetate fibers for potential tissue engineering applications

This article reports the development of fibers from starch acetates that have mechanical properties and water stability better than most polysaccharide‐based biomaterials and protein fibers used in tissue engineering. In this research, starch acetates with three different degrees of substitution (DS) have been used to develop fibers for potential use as tissue engineering scaffolds. Varying the DS of starch acetate will provide fibers with different mechanical properties, hydrophilicity, and degradation behavior. Fibers made from DS 2.3 and 2.8 starch acetates have mechanical properties and water stability required for tissue engineering applications. The starch acetate fibers support the adhesion of fibroblasts demonstrating that the fibers would be suitable for tissue engineering and other medical applications. Biotechnol. Bioeng. 2009;103: 1016–1022. © 2009 Wiley Periodicals, Inc.     

Design and characterization of a rotating bed system bioreactor for tissue engineering applications

The main challenge in the development of bioreactors for tissue engineering is the delivery of a sufficient nutrient and oxygen supply for cell growth in a 3D environment. Thus, a new rotating bed system bioreactor for tissue engineering applications was developed. The system consists of a culture vessel as well as an integrated rotating bed of special porous ceramic discs and a process control unit connected with the reactor to ensure optimal culturing conditions. The aim of the project was the design and construction of a fully equipped rotating bed reactor, and in particular, the characterization and optimization of the system with regard to technical parameters such as mixing time and pH-control to guarantee optimal conditions for cell growth and differentiation. Furthermore, the applicability of the developed system was demonstrated by cultivation of osteoblast precursor cells. The porous structure of the ceramic discs and the external medium circulation loop provide an optimal environment for tissue generation in long-term cultivations. Mass transfer limitations were minimized by the slow rotation, which also provides the cells with sufficient nutrients and oxygen through alternate contact to air and medium. An osteoblast precursor cell line was successfully cultivated in this bioreactor for 28 days.     

Preparation and chemical and biological characterization of a pectin/chitosan polyelectrolyte complex scaffold for possible bone tissue engineering applications

In this work, porous scaffolds obtained from the freeze-drying of pectin/chitosan polyelectrolyte complexes were prepared and characterized by FTIR, SEM and weight loss studies. Additionally, the cytotoxicity of the prepared scaffolds was evaluated in vitro, using human osteoblast cells. The results obtained showed that cells adhered to scaffolds and proliferated. The study also confirmed that the degradation by-products of pectin/chitosan scaffold are noncytotoxic.     

Preparation and biological properties of a novel composite scaffold of nano-hydroxyapatite/chitosan/carboxymethyl cellulose for bone tissue engineering

In this study, we report the physico-chemical and biological properties of a novel biodegradable composite scaffold made of nano-hydroxyapatite and natural derived polymers of chitosan and carboxymethyl cellulose, namely, n-HA/CS/CMC, which was prepared by freeze-drying method. The physico-chemical properties of n-HA/CS/CMC scaffold were tested by infrared absorption spectra (IR), transmission electron microscope(TEM), scanning electron microscope(SEM), universal material testing machine and phosphate buffer solution (PBS) soaking experiment. Besides, the biological properties were evaluated by MG63 cells and Mesenchymal stem cells (MSCs) culture experiment in vitro and a short period implantation study in vivo. The results show that the composite scaffold is mainly formed through the ionic crossing-linking of the two polyions between CS and CMC, and n-HA is incorporated into the polyelectrolyte matrix of CS-CMC without agglomeration, which endows the scaffold with good physico-chemical properties such as highly interconnected porous structure, high compressive strength and good structural stability and degradation. More important, the results of cells attached, proliferated on the scaffold indicate that the scaffold is non-toxic and has good cell biocompatibility, and the results of implantation experiment in vivo further confirm that the scaffold has good tissue biocompatibility. All the above results suggest that the novel degradable n-HA/CS/CMC composite scaffold has a great potential to be used as bone tissue engineering material.     

Bioactive and metal uptake studies of carboxymethyl chitosan-graft-d-glucuronic acid membranes for tissue engineering and environmental applications

Carboxymethyl chitosan-graft-d-glucuronic acid (CMCS-g-d-GA) was prepared by grafting d-GA onto CMCS in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and then the membranes were made from it. In this work, the bioactivity studies of CMCS-g-d-GA membranes were carried out and then characterized by SEM, CLSM, XRD and FT-IR. The CMCS-g-d-GA membranes were found to be bioactive. The adsorption of Ni²⁺, Zn²⁺and Cu²⁺ ions onto CMCS-g-d-GA membranes has also been investigated. The maximum adsorption capacity of CMCS-g-d-GA for Ni²⁺, Zn²⁺and Cu²⁺ was found to be 57, 56.4 and 70.2 mg/g, respectively. Hence, these membranes were useful for tissue engineering, environmental and water purification applications.     

Morphological characterization of a novel scaffold for anterior cruciate ligament tissue engineering

Tissue engineering offers an interesting alternative to current anterior cruciate ligament (ACL) surgeries. Indeed, a tissue-engineered solution could ideally overcome the long-term complications due to actual ACL reconstruction by being gradually replaced by biological tissue. Key requirements concerning the ideal scaffold for ligament tissue engineering are numerous and concern its mechanical properties, biochemical nature, and morphology. This study is aimed at predicting the morphology of a novel scaffold for ligament tissue engineering, based on multilayer braided biodegradable copoly(lactic acid-co-(e-caprolactone)) (PLCL) fibers The process used to create the scaffold is briefly presented, and the degradations of the material before and after the scaffold processing are compared. The process offers varying parameters, such as the number of layers in the scaffold, the pitch length of the braid, and the fibers' diameter. The prediction of the morphology in terms of pore size distribution and pores interconnectivity as a function of these parameters is performed numerically using an original method based on a virtual scaffold. The virtual scaffold geometry and the prediction of pore size distribution are evaluated by comparison with experimental results. The presented process permits creation of a tailorable scaffold for ligament tissue engineering using basic equipment and from minimum amounts of raw material. The virtual scaffold geometry closely mimics the geometry of real scaffolds, and the prediction of the pore size distribution is found to be in good accordance with measurements on real scaffolds. The scaffold offers an interconnected network of pores the sizes of which are adjustable by playing on the process parameters and are able to match the ideal pore size reported for tissue ingrowth. The adjustability of the presented scaffold could permit its application in both classical ACL reconstructions and anatomical double-bundle reconstructions. The precise knowledge of the scaffold morphology using the virtual scaffold will be useful to interpret the activity of cells once it will be seeded into the scaffold. An interesting perspective of the present work is to perform a similar study aiming at predicting the mechanical response of the scaffold according to the same process parameters, by implanting the virtual scaffold into a finite element algorithm.     

Development of novel α-chitin/nanobioactive glass ceramic composite scaffolds for tissue engineering applications

Bioactive glass ceramic nanoparticles (nBGC) were prepared by sol–gel technique. The novel chitin/nBGC composite scaffolds were prepared using chitin gel with nBGC by lyophilization technique. The prepared nBGC and composite scaffolds were characterized using Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), Fourier Transformed Infrared Spectroscopy (FT-IR) and X-ray diffraction (XRD). The composite scaffolds showed adequate porosity where the nBGC nanoparticles were homogenously distributed on the pore walls. The swelling, density, degradation and in vitro biomineralization capability of the composite scaffolds were also evaluated. The developed composite scaffolds showed adequate swelling and degradation properties along with its ability to become bioactive. Cytocompatability of the scaffolds was assessed using MTT assay, direct contact test and cell attachment studies. Results indicated no sign of toxicity and cells found to be attached to the pore walls offered by the scaffolds. These results suggested that the developed composite scaffold possess the prerequisites for tissue engineering scaffolds and it can be used for tissue engineering applications.     

Fabrication of chitin-chitosan/nano ZrO(2) composite scaffolds for tissue engineering applications

The urge to repair and regenerate natural tissues can now be satisfactorily fulfilled by various tissue engineering approaches. Chitin and chitosan are the most widely accepted biodegradable and biocompatible materials subsequent to cellulose. The incorporation of nano ZrO₂ onto the chitin-chitosan scaffold is thought to enhance osteogenesis. Hence a nanocomposite scaffold was fabricated by lyophilization technique using chitin-chitosan with nano ZrO₂. The prepared nanocomposite scaffolds were characterized using SEM, FTIR, XRD and TGA. In addition, the swelling, degradation, biomineralization, cell viability and cell attachment of the composite scaffolds were also evaluated. The results demonstrated better swelling and controlled degradation in comparison to the control scaffold. Cell viability studies proved the non toxic nature of the nanocomposite scaffolds. Cells were found to be attached to the pore walls and spread uniformly throughout the scaffolds. All these results suggested that the developed nanocomposite scaffolds possess the prerequisites for tissue engineering scaffolds and could be used for various tissue engineering applications.     

A novel modified culture medium for enhancing redifferentiation of chondrocytes for cartilage tissue engineering applications

The dedifferentiation of articular chondrocytes during in vitro expansion deteriorates the hyaline cartilage regeneration. Many approaches have been developed to enhance the redifferentiation of chondrocytes. In this study, a new and effective protocol to improve the redifferentiation of porcine chondrocytes in a pellet form was established. Pellets were initially treated in the modified culture media containing ternary mixtures, binary mixtures, or single reagents of sodium citrate (SCi), sodium chloride (SCh), and ethylenediaminetetraacetic acid (EDTA) at varied concentrations during the first 3 days of culture, followed by a normal culture medium until 21 days. Viability, proliferation, cartilaginous gene expression, extracellular matrix formation, and morphology of treated cell pellets were comparatively examined. Chondrocytes exposed to SCi, SCh, and EDTA individually or in combinations of two or three chemicals were non-cytotoxic when the concentration ranges of the chemicals were 1.83–2.75, 5.00–7.50, and 1.00–1.50 mM, respectively. Cells treated with the modified media containing EDTA alone and EDTA-containing mixtures enhanced glycosaminoglycan production as well as upregulated cartilaginous gene expression, despite their low proliferation rates. Overall, when all three reagents were in use, a pronounced synergistic effect on the activations of glycosaminoglycan accumulation and type II collagen production was explicitly observed at most, particularly when cells were cultured in the medium containing SCi, SCh, and EDTA at concentrations of 2.20, 6.00, and 1.20 mM, respectively. With a use of this protocol, the redifferentiation of articular chondrocytes for regeneration of hyaline cartilage for tissue engineering applications could be readily achieved.     

Chitosan and its derivatives for tissue engineering applications

Tissue engineering is an important therapeutic strategy for present and future medicine. Recently, functional biomaterial researches have been directed towards the development of improved scaffolds for regenerative medicine. Chitosan is a natural polymer from renewable resources, obtained from shell of shellfish, and the wastes of the seafood industry. It has novel properties such as biocompatibility, biodegradability, antibacterial, and wound-healing activity. Furthermore, recent studies suggested that chitosan and its derivatives are promising candidates as a supporting material for tissue engineering applications owing to their porous structure, gel forming properties, ease of chemical modification, high affinity to in vivo macromolecules, and so on. In this review, we focus on the various types of chitosan derivatives and their use in various tissue engineering applications namely, skin, bone, cartilage, liver, nerve and blood vessel.     

Tailored carbon nanotubes for tissue engineering applications

A decade of aggressive researches on carbon nanotubes (CNTs) has paved way for extending these unique nanomaterials into a wide range of applications. In the relatively new arena of nanobiotechnology, a vast majority of applications are based on CNTs, ranging from miniaturized biosensors to organ regeneration. Nevertheless, the complexity of biological systems poses a significant challenge in developing CNT‐based tissue engineering applications. This review focuses on the recent developments of CNT‐based tissue engineering, where the interaction between living cells/tissues and the nanotubes have been transformed into a variety of novel techniques. This integration has already resulted in a revaluation of tissue engineering and organ regeneration techniques. Some of the new treatments that were not possible previously become reachable now. Because of the advent of surface chemistry, the CNT's biocompatibility has been significantly improved, making it possible to serve as tissue scaffolding materials to enhance the organ regeneration. The superior mechanic strength and chemical inert also makes it ideal for blood compatible applications, especially for cardiopulmonary bypass surgery. The applications of CNTs in these cardiovascular surgeries led to a remarkable improvement in mechanical strength of implanted catheters and reduced thrombogenecity after surgery. Moreover, the functionalized CNTs have been extensively explored for in vivo targeted drug or gene delivery, which could potentially improve the efficiency of many cancer treatments. However, just like other nanomaterials, the cytotoxicity of CNTs has not been well established. Hence, more extensive cytotoxic studies are warranted while converting the hydrophobic CNTs into biocompatible nanomaterials. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Preparation and characterization of novel chitosan/gelatin membranes using chitosan hydrogel

Chitin and chitosan are novel biomaterials. The novel chitosan/gelatin membranes were prepared using the suspension of chitosan hydrogel mixed with gelatin. The prepared chitosan/gelatin membranes were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), mechanical, swelling, and thermal studies. The morphology of these chitosan/gelatin membranes was found to be very smooth and homogeneous. The XRD studies showed that the chitosan/gelatin membranes have good compatibility and interaction between the chitosan and gelatin. The stress and elongation of chitosan/gelatin membranes on wet condition showed excellent when the mixture ratio of gelatin was 0.50. The prepared chitosan/gelatin membranes showed good swelling, mechanical and thermal properties. Cell adhesion studies were also carried out using human MG-63 osteoblast-like cells. The cells incubated with chitosan/gelatin membranes for 24 h were capable of forming cell adhesion. Thus the prepared chitosan/gelatin membranes are bioactive and are suitable for cell adhesion suggesting that these membranes can be used for tissue-engineering applications. Therefore, these novel chitosan/gelatin membranes are useful for biomedical applications.     

Biocompatibility of hydrogel-based scaffolds for tissue engineering applications

Recently, understanding of the extracellular matrix (ECM) has expanded rapidly due to the accessibility of cellular and molecular techniques and the growing potential and value for hydrogels in tissue engineering. The fabrication of hydrogel-based cellular scaffolds for the generation of bioengineered tissues has been based on knowledge of the composition and structure of ECM. Attempts at recreating ECM have used either naturally-derived ECM components or synthetic polymers with structural integrity derived from hydrogels. Due to their increasing use, their biocompatibility has been questioned since the use of these biomaterials needs to be effective and safe. It is not surprising then that the evaluation of biocompatibility of these types of biomaterials for regenerative and tissue engineering applications has been expanded from being primarily investigated in a laboratory setting to being applied in the multi-billion dollar medicinal industry. This review will aid in the improvement of design of non-invasive, smart hydrogels that can be utilized for tissue engineering and other biomedical applications. In this review, the biocompatibility of hydrogels and design criteria for fabricating effective scaffolds are examined. Examples of natural and synthetic hydrogels, their biocompatibility and use in tissue engineering are discussed. The merits and clinical complications of hydrogel scaffold use are also reviewed. The article concludes with a future outlook of the field of biocompatibility within the context of hydrogel-based scaffolds.     

Non-bioengineered silk gland fibroin protein: characterization and evaluation of matrices for potential tissue engineering applications

The possibility of using wild non-mulberry silk protein as a biopolymer remains unexplored compared to domesticated mulberry silk protein. One of the main reasons for this was for not having any suitable method of extraction of silk protein fibroin from cocoons and silk glands. In this study non-bioengineered non-mulberry silk gland fibroin protein from tropical tasar silkworm Antheraea mylitta, is regenerated and characterized using 1% (w/v) sodium dodecyl sulfate (SDS). The new technique is important and unique because it uses a mild surfactant for fibroin dissolution and is advantageous over other previous reported techniques using chaotropic salts. Fabricated fibroin films are smooth as confirmed by atomic force microscopy. Circular dichroism spectrometry along with Fourier transformed infrared spectroscopy and X-ray diffraction reveal random coil/alpha-helix conformations in regenerated fibroin which transform to beta-sheets, resulting in crystalline structure and protein insolubility through ethanol treatment. Differential scanning calorimetry shows an increase in glass transition (Tg) temperature and enhanced degradation temperature on alcohol treatment. Enhanced cell attachment and viability of AH927 feline fibroblasts were observed on fibroin matrices. Higher mechanical strength along with controllable water stability of regenerated gland fibroin films make non-mulberry Indian tropical tasar silk gland fibroin protein a promising biomaterial for tissue engineering applications.