Sites of metal deposition in the cell wall of Bacillus subtilis

Amine and carboxyl groups of the cell wall of Bacillus subtilis were chemically modified individually to neutralize their electrochemical charge for determination of their contribution to the metal uptake process. Mild alkali treatment removed ca. 94% of the constituent teichoic acid (expressed as inorganic phosphorus) and allowed estimation of metal interaction with phosphodiester bonds. Chemical modifications of amine functions did not reduce the metal uptake values as compared to native walls, whereas extraction of teichoic acid caused a stoichiometric reduction in levels. In contrast, alteration of carboxyl groups severely limited metal deposition of most of the metals tested. X-ray diffraction and electron microscopy suggested, in this case, that the form and structure of the metal deposit could be different from that found in native walls. The observations suggest that carboxyl groups provide the major site of metal deposition in the B. subtilis wall.     

Distribution of teichoic acid in the cell wall of Bacillus subtilis.

Hydrolysis of the cell wall of Bacillus subtilis 168 by autolysins or lysozyme resulted in the exposure of glucosylated teichoic acid molecules as evidenced by increased precipitation of [14C] concanavalin A. The number of concanavalin A-reactive sites increased significantly after only limited enzymatic digestion of the walls. Quantitative analyses of [14C] concanavalin A-treated wall or wall hydrolysate complexes indicate that approximately one-half of the teichoic acid molecules are surface-exposed, whereas the remainder are probably embedded within the peptidoglycan matrix. Treatment of the cell walls with sodium dodecyl sulfate or Triton X-100 did not result in new concanavalin A-reactive sites. Partial autolysis diminished the ability of the cell walls to adsorb bacteriophage phi25. Fluorescein-labeled concanavalin A bound intensely over the entire surface of growing B. subtilis 168 cells, suggesting that teichoic acid molecules are located on the total solvent-exposed surface area of the bacteria.     

Structural differentiation of the Bacillus subtilis 168 cell wall.

Exponential-growth-phase cultures of Bacillus subtilis 168 were probed with polycationized ferritin (PCF) or concanavalin A (localized by the addition of horseradish peroxidase conjugated to colloidal gold) to distinguish surface anionic sites and teichoic acid polymers, respectively. Isolated cell walls, lysozyme-digested cell walls, and cell walls treated with mild alkali to remove teichoic acid were also treated with PCF. After labelling, whole cells and walls were processed for electron microscopy by freeze-substitution. Thin sections of untreated cells showed a triphasic, fibrous wall extending more than 30 nm beyond the cytoplasmic membrane. Measurements of wall thickness indicated that the wall was thicker at locations adjacent to septa and at pole-cylinder junctions (P < 0.001). Labelling studies showed that at saturating concentrations the PCF probe labelled the outermost limit of the cell wall, completely surrounding individual cells. However, at limiting PCF concentrations, labelling was observed at only discrete cell surface locations adjacent to or overlying septa and at the junction between pole and cylinder. Labelling was rarely observed along the cell cylinder or directly over the poles. Cells did not label along the cylindrical wall until there was visible evidence of a developing septum. Identical labelling patterns were observed by using concanavalin A-horseradish peroxidase-colloidal gold. Neither probe appeared to penetrate between the fibers of the wall. We suggest that the fibrous appearance of the wall seen in freeze-substituted cells reflects turnover of the wall matrix, that the specificity of labelling to discrete sites on the cell surface is indicative of regions of extreme hydrolytic activity in which alpha-glucose residues of the wall teichoic acids and electronegative sites (contributed by phosphate and carboxyl groups of the teichoic acids and carboxyl groups of the peptidoglycan polymers) are more readily accessible to our probes, and that the wall of exponentially growing B. subtilis cells contains regions of structural differentiation.     

Binding of magnesium ions to cell walls of Bacillus subtilis W23 containing teichoic acid or teichuronic acid.

When grown in a chemostat under various nutritional conditions, cells of Bacillus subtilis W23 produce walls containing teichoic acid or teichuronic acid. The binding of Mg2+ to these walls and to the isolated anionic polymers in solution was measured by equilibrium dialysis. In solution the ribitol teichoic acid bound Mg2+ in the molar ratio Mg2+/P=1:1 with an apparent association constant (Kassoc.) of 0.61 X 10(3)M-1, and the teichuronic acid bound Mg2+ in the ratio Mg2+/CO2-=1.1, Kassoc.=0.3 X 10(3)M-1. Cell walls containing teichuronic acid exhibited closely similar binding properties to those containing teichoic acid; in both cases Mg2+ was bound in the ratio Mg/P or Mg/CO2- of 0.5:1 and with a greater affinity than displayed by the isolated polymers in solution. It was concluded that Mg2+ ions are bound bivalently between anionic centres in the walls and that the incorporation of teichoic acid or teichuronic acid into the walls gives rise to similar ion-binding and charged properties. The results are discussed in relation to the possible functions of anionic polymers in cell walls.     

Chemical basis for selectivity of metal ions by the Bacillus subtilis cell wall.

The use of equilibrium dialysis techniques established that isolated cell walls of Bacillus subtilis possess selective affinities for several cations. The binding of these cations to the cell wall was influenced by the presence of various functional groups in the peptidoglycan matrix. Selective chemical modification of the free carboxyl and amino groups showed that when amino groups were replaced by neutral, bulky, or negatively charged groups, the sites available for cation complexing generally increased. Introduction of positive charges into the wall resulted in a marked decrease in the numbers of metal binding sites and usually a decrease in the apparent association constants. Both teichoic acid and peptidoglycan contribute to the sites available for interaction with metals. Hill plots of equilibrium dialysis data suggest that metal binding to cell walls involves negative cooperativity. Competition between various metals for binding sites suggested that the cations complex with identical sites on the cell walls. When the hydrogen ion concentration was increased, the affinity of the walls for metals decreased, but the numbers of metal binding sites remained constant, suggesting that cations and protons also compete for the same sites.     

Regulation of autolysins in teichuronic acid-containing Bacillus subtilis cells

Bacillus subtilis cells grown under phosphate starvation induce teichuronic acid (TUA) synthesis while simultaneously repressing teichoic acid synthesis (TA). The turnover rates of TA-containing and TUA-containing walls are similar, indicating that autolysin function is similar and suggesting that modulation of autolytic function may be similar. In this study, it is demonstrated, utilizing fluorescein isothiocyanate (FITC)-dextran to probe the wall pH, that a low pH exists in the wall matrix. A second probe, cationized ferritin (CF), was used to observe cell surface protonation. Suspensions of B. subtilis cells containing either TA or TUA were aggregated with CF only after the addition of a proton-motive-force-dissipating agent. Respiring B. subtilis TUA-containing cells labelled with FITC-dextran exhibited little fluorescence. Conversely, fluorescence intensities exhibited by cells de-energized with nitrogen gas were significantly greater. The effects of protonmotive force on autolytic activity were studied by adding cell wall protein extract containing concentrated autolysin to exponentially growing TA-containing and TUA-containing B. subtilis cells. Both TUA-containing and TA-containing cells were lysed only after the addition of sodium azide. These data suggest that during normal growth the wall of TUA-containing B. subtilis cells is protonated, and proton-motive force influences autolytic regulation in both TUA-containing and TA-containing B. subtilis cells.     

Insertion and fate of the cell wall in Bacillus subtilis

Cell wall assembly was studied in autolysin-deficient and -sufficient strains of Bacillus subtilis. Two independent probes, one for peptidoglycan and the other for surface-accessible teichoic acid, were employed to monitor cell surface changes during growth. Cell walls were specifically labeled with N-acetyl-D-[3H]glucosamine, and after growth, autoradiographs were prepared for both cell types. The locations of silver grains revealed that label was progressively lost from numerous sites on the cell cylinders, whereas label was retained on the cell poles, even after several generations. In the autolysin-deficient and chain-forming strain, it was found that the distance between densely labeled poles approximately doubled after each generation of growth. In the autolysin-sufficient strain, it was found that the numbers of labeled cell poles remained nearly constant for several generations, supporting the premise that completed septa and poles are largely conserved during growth. Fluorescein-conjugated concanavalin A was also used to determine the distribution of alpha-D-glucosylated teichoic acid on the surfaces of growing cells. Strains with temperature-sensitive phosphoglucomutase were used because in these mutants, glycosylation of cell wall teichoic acids can be controlled by temperature shifts. When the bacteria were grown at 45 degrees C, which stops the glucosylation of teichoic acid, the cells gradually lost their ability to bind concanavalin A on their cylindrical surfaces, but they retained concanavalin A-reactive sites on their poles. Discrete areas on the cylinder, defined by the binding of fluorescent concanavalin A, were absent when the synthesis of glucosylated teichoic acid was inhibited during growth for several generations at the nonpermissive temperature. When the mutant was shifted from a nonpermissive to a permissive temperature, all areas of the cylinder became able to bind the labeled concanavalin A after about one-half generation. Old cell poles were able to bind the lectin after nearly one generation at the permissive temperature, showing that new wall synthesis does occur in the cell poles, although it occurs slowly. These data, based on both qualitative and quantitative experiments, support a model for cell wall assembly in B. subtilis, in which cylinders elongate by inside-to-outside growth, with degradation of the stress-bearing old wall in wild-type organisms. Loss of wall material, by turnover, from many sites on the cylinder may be necessary for intercalation of new wall and normal length extension. Poles tend to retain their wall components during division and are turned over much more slowly.     

Relation between wall teichoic acid content of Bacillus subtilis and efficiency of adsorption of bacteriophages SP 50 and Φ 25

Efficient adsorption of bacteriophages SP 50 and 25 occurred only to bacilli that contained wall teichoic acid and neither phage bound to phosphate limited bacilli that contained teichuronic acid instead of teichoic acid. Though both phages require the presence of teichoic acid, their receptors are not identical. Efficient binding of phage 25 required the presence of greater proportions of teichoic acid in the wall and the receptor for this phage was destroyed when bacteria or isolated walls were heated at pH 4 whereas the ability of these samples to bind phage SP 50 was unaffected by such treatment. Efficient binding of phage SP 50 was not highly dependant on the presence of glucosyl substituents on the teichoic acid. Such substituents were required for phage 25 binding though their anomeric configuration appeared to be unimportant since the phages bound well to both strains W23 and 168, the wall teichoic acids of which carry glucosyl substituents of opposite anomeric configuration. The differeneces in the nature of the receptors may be of value in the use of the phages as probes for the location and distribution of teichoic acid in the wall.Non-Standard Abbreviation PAE Phage adsorption efficiency, as defined by Archibald and Coapes (1976)     

Organization of teichoic acid in the cell wall of Bacillus subtilis.

The phytohemagglutinin, concanavalin A (Con A), interacts specifically and reversibly with the polyglucosyl glycerol phosphate teichoic acid of Bacillus subtilis 168 cell walls. Advantage has been taken of this interaction to examine the organization of the surface teichoic acid at the ultrastructural level. Con A-treated whole cells and cell walls contain an irregular, fluffy layer 25 to 60 nm thick which is absent in untreated or alpha-methyl glucoside-treated preparations. This discontinuous layer is present only on the outer profile of Con-A-treated cell walls. The surface teichoic acid is proposed to be oriented perpendicular to the long axis of the cell. Fixation and embedment for electron microscopy result in condensation of this layer which then contributes to the stainable portion of the wall. Con A treatment binds adjacent teichoic acid molecules in their native configuration producing the irregular, fluffy layer visualized.     

The membrane-induced proton motive force influences the metal binding ability of Bacillus subtilis cell walls.

Bacillus subtilis 168 is a gram-positive bacterium whose cell wall contains the highly electronegative polymers peptidoglycan (chemotype A1 gamma) and glycerol-based teichoic acid to produce a surface with a net negative charge with high metal binding capacity. During metabolism, a membrane-induced proton motive force continuously pumps protons into the wall fabric. As a result, a competition between protons and metal ions for anionic wall sites occurs, and less metal is bound in living cells than in nonliving cells or those in which the plasma membrane has been uncoupled. This was shown by using two metallic ions, UO2(2+) and Sc3+, on control cells, cells uncoupled with either carbonyl cyanide m-chlorophenylhydrazone or NaN3, or cells killed by gamma radiation. Transmission electron microscopy, energy-dispersive X-ray spectroscopy, and inductively coupled plasma atomic-emission spectroscopy showed that more metal was retained in the walls of nonliving cells and those with deenergized membranes than in their living counterparts.     

The membrane-induced proton motive force influences the metal binding ability of Bacillus subtilis cell walls.

Bacillus subtilis 168 is a gram-positive bacterium whose cell wall contains the highly electronegative polymers peptidoglycan (chemotype A1 gamma) and glycerol-based teichoic acid to produce a surface with a net negative charge with high metal binding capacity. During metabolism, a membrane-induced proton motive force continuously pumps protons into the wall fabric. As a result, a competition between protons and metal ions for anionic wall sites occurs, and less metal is bound in living cells than in nonliving cells or those in which the plasma membrane has been uncoupled. This was shown by using two metallic ions, UO2(2+) and Sc3+, on control cells, cells uncoupled with either carbonyl cyanide m-chlorophenylhydrazone or NaN3, or cells killed by gamma radiation. Transmission electron microscopy, energy-dispersive X-ray spectroscopy, and inductively coupled plasma atomic-emission spectroscopy showed that more metal was retained in the walls of nonliving cells and those with deenergized membranes than in their living counterparts.     

Major sites of metal binding in Bacillus licheniformis walls.

Isolated and purified walls of Bacillus licheniformis NCTC 6346 his contained peptidoglycan, teichoic acid, and teichuronic acid (0.36 mumol of diaminopimelic acid, 0.85 mumol of organic phosphorus, and 0.43 mumol of glucuronic acid per mg [dry weight] of walls, respectively). The walls also contained a total of 0.208 mumol of metal per mg. When these walls were subjected to metal-binding conditions (T. J. Beveridge and R. G. E. Murray, J. Bacteriol. 127:1502-1518, 1976) for nine metals, the amount of bound metal above background ranged from 0.910 mumol of Na to 0.031 mumol of Au per mg of walls. Most were in the 0.500-mumol mg-1 range. Electron-scattering profiles from unstained thin sections indicated that the metal was dispersed throughout the wall fabric. Mild alkali treatment extracted teichoic acid from the walls (97% based on phosphorus) but left the peptidoglycan and teichuronic acid intact. This treatment reduced their capacity for all metals but Au. Thin sections revealed that the wall thickness had been reduced by one-third, but metal was still dispersed throughout the wall fabric. Trichloroacetic acid treatment of the teichoic acid-less walls removed 95% of the teichuronic acid (based on glucuronic acid) but left the peptidoglycan intact (based on sedimentable diaminopimelic acid). The thickness of these walls was not further reduced, but little binding capacity remained (usually less than 10% of the original binding). The staining of these walls with Au produced a 14.4-nm repeat frequency within the peptidoglycan fabric. Sedimentation velocity experiments with the extracted teichuronic acid in the presence of metal confirmed it to be a potent metal-complexing polymer. These results indicated that teichoic and teichuronic acids are the prime sites of metal binding in B. licheniformis walls.     

Cell Wall Composition and Associated Properties of Methicillin-Resistant Staphylococcus aureus Strains

Methicillin-resistant (MR) Staphylococcus aureus strains have previously been reported to be deficient in surface negative charge; this has been correlated with methicillin resistance and ascribed to a deficiency of teichoic acid at the cell surface (A. W. Hill and A. M. James, Microbios 6:157-167, 1972). Teichoic acid was present in walls of MR organisms as revealed by appreciable phosphate levels and detection of ribitol residues. Phosphate levels in walls from five MR strains (0.54 to 0.77 mumol/mg of wall) were lower than in three unrelated methicillin-sensitive (MS) strains (0.86 to 1.0 mumol/mg of wall). However, two MS strains derived from two of the MR strains had wall phosphate levels very similar to those of the MR strains. No evidence for unusual wall polymers was found. Simple deficiency of wall teichoic acid does not result in methicillin resistance since an independently isolated teichoic acid-deficient strain (0.1 mumol of phosphate per mg of wall) was not methicillin resistant. In studies of biological properties possibly related to wall teichoic acid, it was discovered that walls isolated from MR organisms grown in the presence of methicillin autolyzed more rapidly than those isolated from organisms grown in the absence of the drug. Since methicillin resistance is enhanced by NaCl and suppressed by ethylenediaminetetraacetate, the effects of these compounds on autolysis of isolated walls were studied. NaCl (1.0 M) and ethylenediaminetetraacetate (1.0 mM) inhibited the autolysis of walls isolated from MR and MS strains. An MR strain bound phage 47, 52A, and 3A only slightly less well than their respective propagating strains.     

Teichoic acid is an essential polymer in Bacillus subtilis that is functionally distinct from teichuronic acid

Wall teichoic acids are anionic, phosphate-rich polymers linked to the peptidoglycan of gram-positive bacteria. In Bacillus subtilis, the predominant wall teichoic acid types are poly(glycerol phosphate) in strain 168 and poly(ribitol phosphate) in strain W23, and they are synthesized by the tag and tar gene products, respectively. Growing evidence suggests that wall teichoic acids are essential in B. subtilis; however, it is widely believed that teichoic acids are dispensable under phosphate-limiting conditions. In the work reported here, we carefully studied the dispensability of teichoic acid under phosphate-limiting conditions by constructing three new mutants. These strains, having precise deletions in tagB, tagF, and tarD, were dependent on xylose-inducible complementation from a distal locus (amyE) for growth. The tarD deletion interrupted poly(ribitol phosphate) synthesis in B. subtilis and represents a unique deletion of a tar gene. When teichoic acid biosynthetic proteins were depleted, the mutants showed a coccoid morphology and cell wall thickening. The new wall teichoic acid biogenesis mutants generated in this work and a previously reported tagD mutant were not viable under phosphate-limiting conditions in the absence of complementation. Cell wall analysis of B. subtilis grown under phosphate-limited conditions showed that teichoic acid contributed approximately one-third of the wall anionic content. These data suggest that wall teichoic acid has an essential function in B. subtilis that cannot be replaced by teichuronic acid.     

Wall turnover deficiency of Bacillus subtilis Ni15 is due to a decrease in teichoic acid

Bacillus subtilis Ni15 is deficient in cell wall turnover. The deficiency is removed if the medium contains 0.2 M NaCl, which does not affect growth. The levels of amidase and glucosaminidase, the most likely enzymes involved in turnover, were, in stationary phase Ni15 cells, similar to those in late-exponential phase cells of a standard strain. The Ni15 enzymes were not salt sensitive. However, the Ni15 walls contained 4.7-fold less phosphorus than the walls of the standard strain. Since the phosphorus content of B. subtilis walls reflects the level of teichoic acid, it is proposed that the turnover deficiency of this strain is due to a decrease in wall teichoic acid.     

Influence of phosphate supply on teichoic acid and teichuronic acid content of Bacillus subtilis cell walls

Bacillus subtilis 168 was grown in chemostat culture in fully defined media containing a constant concentration of magnesium and concentrations of phosphate that varied from those giving phosphate-limited growth to those in which phosphate was present in excess and magnesium was limiting. Phosphate-limited bacteria were deficient in wall teichoic acid and contained less than half as much cellular phosphate as did bacteria grown in excess of phosphate. Approximately 70% of the additional phosphate in the latter bacteria was present as wall teichoic acid, indicating that the ability of the bacteria to discontinue teichoic acid synthesis when grown under phosphate limitation permits a substantial increase in their growth yield. Since not all of the additional phosphate is present as wall teichoic acid other cellular phosphates may also be present in reduced amounts in the phosphate-limited bacteria. The content of phosphate groups in walls of magnesium-limited bacteria was similar to the content of uronic acid groups in walls of phosphate-limited bacteria, and walls of bacteria grown in media of intermediate composition contained intermediate proportions of the two anionic polymers. Phage SP50, used as a marker for the presence of teichoic acid, bound densely to nearly all of the bacteria in samples containing down to 22% of the maximum content of teichoic acid. Apparently, therefore, nearly all of these bacteria contain teichoic acid, and the population does not consist of a mixture of individuals having exclusively one kind of anionic polymer. Bacteria containing less than 22% of the maximum content of teichoic bound in a nonuniform manner, and possible explanations for this are discussed.     

Cell wall composition and surface properties in Bacillus subtilis: anomalous effect of incubation temperature on the phage-binding properties of bacteria containing varied amounts of teichoic acid

Adsorption of bacteriophage SP50 to walls and heat-killed cells of Bacillus subtilis 168 appeared to be irreversible at both 37 and 0 degree C. Few, if any, active phage were desorbed when phage-wall complexes, formed at either temperature, were suspended in fresh medium. Bacteria rich in wall teichoic acid (TA) bound phage rapidly at both 0 and 37 degrees C, binding at the higher temperature being approximately twice as fast. Bacteria containing diminished proportions of TA showed less rapid phage adsorption but the reduction in rate was greater at 37 than at 0 degree C and bacteria containing only small proportions of TA bound phage more rapidly at 0 degree C than they did at 37 degrees C. These findings show that at low phage receptor density the temperature affects some component(s) involved in the phage-bacterium interaction such that the collision efficiency is increased at the lower temperature. The possible effect of temperature on the organization of bacterial surface components is discussed.     

Influence of alanyl ester residues on the binding of magnesium ions to teichoic acids.

The binding of Mg2+ to the ribitol teichoic acid of Staphylococcus aureus H walls was examined by equilibrium dialysis in solution and in the intact wall; the influence of alanyl ester groups on binding was determined. In solution the ribitol polymer had a lower affinity than did a glycerol teichoic acid and bound Mg2+ in the ratio Mg2+/P of 1:1. The presence of alanyl ester residues caused a decrease in the amount of cations bound in stoicheiometric proportion to the ratio Ala/P, but the affinity constant was unaltered. It is concluded that in solution the ribitol teichoic acid binds Mg2+ univalently to phosphate groups and univalently to a counter-ion. In the intact wall the binding of Mg2+ was different. The affinity constant was higher and resembled that of a glycerol teichoic acid. It is concluded that Mg2+ forms bridges across phosphate groups in teichoic acid chains lying adjacent to each other in the wall. The effect of alanyl esters was similar to that in solution, but Scatchard plots were not linear at low concentrations of Mg2+ where it was shown that the difference in affinities between walls with and without alanyl ester residues was much greater than it was at higher concentrations of Mg2+. Thus at very low concentrations of Mg2+ effective binding to the wall is markedly improved by loss of alanyl ester residues.     

An electron microscopic study of the location of teichoic acid and its contribution to staining reactions in walls of Streptococcus faecalis 8191.

The location of the glucosylated teichoic acid in whole cells and isolated walls of Streptococcus faecalis 8191 has been investigated using ruthenium red, gold-labelled concanavalin A and concanavalin A-peroxidase-diaminobenzidine. Dense laminae were revealed in sections of osmium-fixed walls stained with ruthenium red which corresponded to similar regions stained by uranyl and lead. Such regions were not seen after teichoic acid had been extracted, suggesting that the uptake of stain was by teichoic acid. However, these regions were not labelled on exposure to gold concanavalin A or concanavalin A-peroxidase-diaminobenzidine; these stains indicated that teichoic acid was situated between the dense laminae, although the distribution of stain could have been due to the inability of the concanavalin A stains to penetrate deeply. Chemical binding studies showed that the teichoic acid was the major uranyl binding component in isolated walls, from which it might be inferred that teichoic acid was located in the densely staining regions. However, since osmification significantly increased the binding of uranyl (and lead stains) to non-teichoic acid material, such an inference was not necessarily valid. It is concluded that the presence of teichoic acid can be demonstrated in certain regions of the wall by concanavalin A, but its presence in densely staining regions has not been established. These experiments therefore suggest that teichoic acid may not be intimately associated with the mechanisms that generate contrast patterns in stained sections of cell walls of Streptococcus faecalis.     

The function of teichoic acids in cation control in bacterial membranes

1. The effects of teichoic acids on the Mg(2+)-requirement of some membrane-bound enzymes in cell preparations from Bacillus licheniformis A.T.C.C. 9945 were examined. 2. The biosynthesis of the wall polymers poly(glycerol phosphate glucose) and poly(glycerol phosphate) by membrane-bound enzymes is strongly dependent on Mg(2+), showing maximum activity at 10-15mm-Mg(2+). 3. When the membrane is in close contact with the cell wall and membrane teichoic acid, the enzyme systems are insensitive to added Mg(2+). The membrane appears to interact preferentially with the constant concentration of Mg(2+) that is bound to the phosphate groups of teichoic acid in the wall and on the membrane. When the wall is removed by the action of lysozyme the enzymes again become dependent on an external supply of Mg(2+). 4. A membrane preparation that retained its membrane teichoic acid was still dependent on Mg(2+) in solution, but the dependence was damped so that the enzymes exhibited near-maximal activity over a much greater range of concentrations of added Mg(2+); this preparation contained Mg(2+) bound to the membrane teichoic acid. The behaviour of this preparation could be reproduced by binding membrane teichoic acid to membranes in the presence of Mg(2+). Addition of membrane teichoic acid to reaction mixtures also had a damping effect on the Mg(2+) requirement of the enzymes, since the added polymer interacted rapidly with the membrane. 5. Other phosphate polymers behaved in a qualitatively similar way to membrane teichoic acid on addition to reaction mixtures. 6. It is concluded that in whole cells the ordered array of anionic wall and membrane teichoic acids provides a constant reservoir of bound bivalent cations with which the membrane preferentially interacts. The membrane teichoic acid is the component of the system which mediates the interaction of bound cations with the membrane. The anionic polymers in the wall scavenge cations from the medium and maintain a constant environment for the membrane teichoic acid. Thus a function of wall and membrane teichoic acids is to maintain the correct ionic environment for cation-dependent membrane systems.