Analysis of the mobilization region of the broad-host-range IncQ-like plasmid pTC-F14 and its ability to interact with a related plasmid, pTF-FC2

Plasmid pTC-F14 is a 14.2-kb plasmid isolated from Acidithiobacillus caldus that has a replicon that is closely related to the promiscuous, broad-host-range IncQ family of plasmids. The region containing the mobilization genes was sequenced and encoded five Mob proteins that were related to those of the DNA processing (Dtr or Tra1) region of IncP plasmids rather than to the three-Mob-protein system of the IncQ group 1 plasmids (e.g., plasmid RSF1010 or R1162). Plasmid pTC-F14 is the second example of an IncQ family plasmid that has five mob genes, the other being pTF-FC2. The minimal region that was essential for mobilization included the mobA, mobB, and mobC genes, as well as the oriT gene. The mobD and mobE genes were nonessential, but together, they enhanced the mobilization frequency by approximately 300-fold. Mobilization of pTC-F14 between Escherichia coli strains by a chromosomally integrated RP4 plasmid was more than 3,500-fold less efficient than the mobilization of pTF-FC2. When both plasmids were coresident in the same E. coli host, pTC-F14 was mobilized at almost the same frequency as pTF-FC2. This enhanced pTC-F14 mobilization frequency was due to the presence of a combination of the pTF-FC2 mobD and mobE gene products, the functions of which are still unknown. Mob protein interaction at the oriT regions was unidirectionally plasmid specific in that a plasmid with the oriT region of pTC-F14 could be mobilized by pTF-FC2 but not vice versa. No evidence for any negative effect on the transfer of one plasmid by the related, potentially competitive plasmid was obtained.     

Isolation of a new broad-host-range IncQ-like plasmid, pTC-F14, from the acidophilic bacterium Acidithiobacillus caldus and analysis of the plasmid replicon

A moderately thermophilic (45 to 50 degrees C), highly acidophilic (pH 1.5 to 2.5), chemolithotrophic Acidithiobacillus caldus strain, f, was isolated from a biooxidation process used to treat nickel ore. Trans-alternating field electrophoresis analysis of total DNA from the A. caldus cells revealed two plasmids of approximately 14 and 45 kb. The 14-kb plasmid, designated pTC-F14, was cloned and shown by replacement of the cloning vector with a kanamycin resistance gene to be capable of autonomous replication in Escherichia coli. Autonomous replication was also demonstrated in Pseudomonas putida and Agrobacterium tumefaciens LBA 4404, which suggested that pTC-F14 is a broad-host-range plasmid. Sequence analysis of the pTC-F14 replicon region revealed five open reading frames and a replicon organization like that of the broad-host-range IncQ plasmids. Three of the open reading frames encoded replication proteins which were most closely related to those of IncQ-like plasmid pTF-FC2 (amino acid sequence identities: RepA, 81%; RepB, 78%; RepC, 74%). However, the two plasmids were fully compatible and pTC-F14 represents a new IncQ-like plasmid replicon. Surprisingly, asymmetrical incompatibility was found with the less closely related IncQ plasmid R300B derivative pKE462 and the IncQ-like plasmid derivative pIE1108. Analysis of the pTC-F14 oriV region revealed five direct repeats consisting of three perfectly conserved 22-bp iterons flanked by iterons of 23 and 21 bp. Plasmid pTC-F14 had a copy number of 12 to 16 copies per chromosome in both E. coli, and A. caldus. The rep gene products of pTC-F14 and pTF-FC2 were unable to functionally complement each other's oriV regions, but replication occurred when the genes for each plasmid's own RepA, RepB, and RepC proteins were provided in trans. Two smaller open reading frames were found between the repB and repA genes of pTC-F14, which encode proteins with high amino acid sequence identity (PasA, 81%; PasB, 72%) to the plasmid addiction system of pTF-FC2. This is the second time a plasmid stability system of this type has been found on an IncQ-like plasmid.     

A new IncQ plasmid R89S: Properties and genetic organization

The new small (8.18 kb) streptomycin-resistant multicopy plasmid R89S of the Q group incompatibility is described. In contrast to other IncQ plasmids, replication of R89S is dependent on DNA polymerase 1 and proceeds in the absence of de novo protein synthesis. According to our data up to now, the host spectrum of the plasmid R89S is limited to Enterobacteriaceae. A genetic map of the plasmid R89S has been prepared through the construction of deletion and insertion derivatives. Phenotypic analysis of these derivatives has identified the location of genes encoding resistance to streptomycin, and the region essential for mobilization of R89S. The origin of vegetative replication has been located within a 0.7-kb fragment. Another region highly homologous to oriV of the plasmid RSF1010, but not functioning as an origin of replication, was localized. Two regions involved in the expression of incompatibility have also been identified. The data from the restriction analyses, DNA-DNA hybridization, and genetic experiments enable us to assume that the plasmid R89S is a naturally occurring recombinant between part of an IncQ plasmid and another narrow host range replicon of unknown incompatibility group.     

Comparative Biology of Two Natural Variants of the IncQ-2 Family Plasmids,pRAS3.1 and pRAS3.2

Plasmids pRAS3.1 and pRAS3.2 are two closely related, natural variants of the IncQ-2 plasmid family that have identical plasmid backbones except for two differences. Plasmid pRAS3.1 has five 6-bp repeat sequences in the promoter region of the mobB gene and four 22-bp iterons in its oriV region, whereas pRAS3.2 has only four 6-bp repeats and three 22-bp iterons. Plasmid pRAS3.1 was found to have a higher copy number than pRAS3.2, and we show that the extra 6-bp repeat results in an increase in mobB and downstream mobA/repB expression. Placement of repB (primase) behind an arabinose-inducible promoter in trans resulted in an increase in repB expression and an approximately twofold increase in the copy number of plasmids with identical numbers of 22-bp iterons. The pRAS3 plasmids were shown to have a previously unrecognized toxin-antitoxin plasmid stability module within their replicons. The ability of the pRAS3 plasmids to mobilize the oriT regions of two other plasmids of the IncQ-2 family, pTF-FC2 and pTC-F14, suggested that the mobilization proteins pRAS3 are relaxed and can mobilize oriT regions with substantially different sequences. Plasmids pRAS3.1 and pRAS3.2 were highly incompatible with plasmids pTF-FC2 and pTC-F14, and this incompatibility was removed on inactivation of an open reading frame situated downstream of the mobCDE mobilization genes rather than being due to the 22-bp oriV-associated iterons. We propose that the pRAS3 plasmids represent a third, γ incompatibility group within the IncQ-2 family plasmids.Plasmids of the IncQ family are small (<20 kb), have a broad host range, and are highly promiscuous due to their ability to be mobilized very efficiently by self-transmissible plasmids such as the IncP plasmids. They have been divided into two families, IncQ-1 and IncQ-2, based on the amino acid sequence relatedness of their RepA (helicase), RepB (primase), and RepC (DNA-binding) replication proteins and because the mobilization proteins of the two families are unrelated, consisting of three or five genes, respectively (31). IncQ-1 group plasmids include RSF1010 and the near-identical R1162, pDN1, pIE1107, pIE1115, and pIE1130, while IncQ-2 plasmids include pTF-FC2, pTC-F14, and pRAS3.IncQ-2 plasmids pRAS3.1 and pRAS3.2 were isolated in Norway from the fish pathogens Aeromonas salmonicida subsp. salmonicida and atypical A. salmonicida, respectively, while investigating plasmids that conferred resistance to tetracycline (21). The two plasmids encode identical replication and mobilization proteins, with the most important differences in the plasmid backbone being that pRAS3.1 has four 22-bp iterons in its oriV region and five 6-bp repeat sequences upstream of its mobB gene, whereas pRAS3.2 has only three iterons and four 6-bp repeat sequences. No biological studies were carried out in the initial report of the pRAS3 plasmids. As a contribution to our studies on the evolution of IncQ plasmids, our longer-term aim is to address the question of why two natural versions of the plasmid exist. Here we report on the major differences in the biology of the two plasmids. In addition, we discovered the presence of repC and mobB genes that were not detected when the sequence of pRAS3 plasmids was previously reported. We also discovered a putative toxin-antitoxin (TA) postsegregational system different from that found in other members of the IncQ plasmids and tested it for functionality.The IncQ-1 plasmids are subdivided into incompatibility groups α, β, and γ, (31), whereas the IncQ-2 plasmids are subdivided into two incompatibility groups, α and β (14). In this work we also report on the incompatibility between the pRAS3 plasmids and other members of the IncQ-2 plasmid family as well as the IncQ-1 family plasmids. Furthermore, we compare the functional relatedness of the pRAS3 mobilization system with that of previously studied IncQ-2 plasmids.     

Diversity, biology and evolution of IncQ-family plasmids

Plasmids of IncQ-family are distinguished by having a unique strand-displacement mechanism of replication that is capable of functioning in a wide variety of bacterial hosts. In addition, these plasmids are highly mobilizable and therefore very promiscuous. Common features of the replicons have been used to identify IncQ-family plasmids in DNA sequence databases and in this way several unstudied plasmids have been compared to more well-studied IncQ plasmids. We propose that IncQ plasmids can be divided into four subgroups based on a number of mutually supportive criteria. The most important of these are the amino acid sequences of their three essential replication proteins and the observation that the replicon of each subgroup has become fused to four different lineages of mobilization genes. This review of IncQ-family plasmid diversity has highlighted several events in the evolution of these plasmids and raised several questions for further research.     

A functional origin of transfer (oriT) on the conjugative transposon Tn916.

The origin of transfer (oriT) of the 18-kb conjugative transposon Tn916 has been localized to a 466-bp region which spans nucleotides 15215 to 15681 on the transposon map. The oriT lies within an intercistronic region between open reading frames ORF20 and ORF21 that contains six sets of inverted repeats ranging from 10 to 20 bp in size. The segment contains three sequences showing identity in 9 of 12 bp to the consensus nicking site (nic) of the IncP family of conjugative plasmids found in gram-negative bacteria. Overlapping one of these sequences is a region similar to the nic site of the F plasmid. Functionality was based on the ability of the oriT-containing sequence to provide a cis-acting mobilization of chimeras involving the shuttle vector pWM401 in response to activation in trans by an intact chromosome-borne transposon Tn916 delta E. Cloned segments of 466 or 376 nucleotides resulted in unselected cotransfer of the plasmid at levels of about 40% when selection was for Tn916 delta E, whereas a 110-bp segment resulted in cotransfer at a frequency of about 7%. Mobilization was specific in that gram-positive plasmids, such as pAD1 and pAM beta 1, and the gram-negative plasmids pOX38 (a derivative of F) and RP1 did not mobilize oriT-containing chimeras.     

The mobilization and origin of transfer regions of a Thiobacillus ferrooxidans plasmid: relatedness to plasmids RSF1010 and pSC101

The components for the mobilization function of a plasmid DNA during conjugation include a cis-acting sequence (the origin of transfer, oriT) and a transacting sequence coding for mobilization (Mob) proteins. By genetic and deletion analysis, we have located the mobilization region of pTF1, a cryptic plasmid previously isolated from a Thiobacillus ferrooxidans strain. Within a 2797 bse-pair sequenced region, several open reading frames (ORFs) were predicted; two of the ORFs are divergently transcribed and they encode proteins of calculated molecular masses, 42.6kD (ORF2) and 11.4kD (ORF6). Surprisingly, these protein sequences are substantially similar to two of the previously characterized mobilization proteins of the Escherichia coli IncQ plasmid, RSF1010. Moreover, the pTF1 ORF2 (now designated MobL) sequence is also found to be similar to a presumed mobilization protein of plasmid pSC101. Regions of sequence identity of plasmids pTF1, RSF1010 and pSC101 include their oriT sites. By alkaline agarose gel electrophoresis and DNA sequencing, we have established the location of the relaxation complex nick site within the oriT of pTF1. An identical nick site, which is adjacent to a characteristic 10 base-pair inverted repeat sequence, is also found for plasmid RSF1010. A recombinant plasmid containing a 42 base-pair synthetic piece of DNA encompassing the pTF1 inverted repeat and nick sequence was shown to be oriT-active.     

Removal of symmetrical sequences from the origin region of plasmid R1 reduces its replication efficiency

The R1 origin region contains many symmetrical DNA sequence elements which allow the formation of complex secondary structures. A 218-bp in vivo deletion in a cloned R1 origin fragment removes most of them. As this deletion was never observed in plasmids containing all R1 replication functions, it was introduced by BglI in vitro recombination into the `basic replicon' of R1 cloned into pBR322. The recombinant plasmid with the 218-bp deletion and its derivatives unambiguously show that the deleted symmetrical elements are not absolutely essential for R1 replication as was previously assumed though they seem to determine a more efficient origin function. Likewise, a hypothetical protein of a mol. wt. of 14 000 daltons, the major part of which would be encoded by the deleted sequences, does not seem to be of particular importance for R1-specific replication. This is the first report of an alteration in the origin region of an IncFII plasmid which affects plasmid replication without abolishing it completely.     

The evolution of pTF-FC2 and pTC-F14, two related plasmids of the IncQ-family

Two plasmids, pTF-FC2 and pTC-F14, that belong to the IncQ-like plasmid family were isolated from two related bacteria, Acidithiobacillus ferrooxidans and Acidithiobacillus caldus, respectively. The backbone regions of the two plasmids share a sufficiently high amount of homology to indicate that they must have originated from the same ancestral plasmid. Although some of their replication proteins could complement each other, the plasmids have evolved sufficiently for their replicons to have become compatible. This compatibility has occurred by changes in the iteron sequence, RepC (iteron binding protein) specificity and the regulation properties of the RepB primase. Two of the five mobilization genes have remained highly conserved, whereas the other three genes appear to have evolved such that each plasmid is mobilized most efficiently by a different self-transmissible plasmid. Plasmids pTF-FC2 and pTC-F14 do not appear to compete at the level of mobilization. The antitoxins of the toxin-antitoxin (TA) plasmid stability systems were partly able to neutralize the toxins of the other plasmid and also to partly cross-regulate the TA systems of the other plasmid with the antitoxin of pTF-FC2 being the most effective cross-regulator. Other aspects of the evolution of the two plasmids are described and the danger of making the assumption that incompatibly of IncQ-like plasmids is a reflection of the degree of relatedness of two plasmids is discussed.     

Identification of the minimal replication region of the multicopy Streptomyces plasmid pSL1

The 1.52-kb minimal replication origin of the 3.9-kb Streptomyces plasmid pSL1 was determined using a bifunctional derivative, pMCP44, of pSL1. Plasmids with linker insertions into the pSL1 part of pMCP44 were isolated from Escherichia coli. The sites of insertion were determined by restriction enzyme analysis and the ability of the mutant plasmids to replicate in S. lividans 66 was determined. All except one of the inserts in the 1.52-kb essential region inactivated replication. A 104-bp segment from this region could function as a replication origin in the presence of a helper plasmid containing a nonoverlapping pSL1 fragment. The sequence of this 104-bp fragment shows similarities to those of known plasmid replication origins.     

Replication and conjugative mobilization of broad host-range IncQ plasmids

The IncQ plasmids have a broader host-range than any other known replicating element in bacteria. Studies on the replication and conjugative mobilization of these plasmids, which have mostly been focused on the nearly identical RSF1010 and R1162, are summarized with a view to understanding how this broad host-range is achieved. Several significant features of IncQ plasmids emerge from these studies: (1) initiation of replication, involving DnaA-independent activation of the origin and a dedicated primase, is strictly host-independent. (2) The plasmids can be conjugatively mobilized by a variety of different type IV transporters, including those engaged in the secretion of proteins involved in pathogenesis. (3) Stability is insured by a combination of high copy-number and modulated gene expression to reduce metabolic load.     

Initiation and termination of DNA transfer during conjugation of IncI1 plasmid R64: roles of two sets of inverted repeat sequences within oriT in termination of R64 transfer

Intercellular transfer of plasmid DNA during bacterial conjugation initiates and terminates at a specific origin of transfer, oriT. We have investigated the oriT structure of conjugative plasmid R64 with regard to the initiation and termination of DNA transfer. Using recombinant plasmids containing two tandemly repeated R64 oriT sequences with or without mutations, the subregions required for initiation and termination were determined by examining conjugation-mediated deletion between the repeated oriTs. The oriT subregion required for initiation was found to be identical to the 44-bp oriT core sequence consisting of two units, the conserved nick region sequence and the 17-bp repeat A sequence, that are recognized by R64 relaxosome proteins NikB and NikA, respectively. In contrast, the nick region sequence and two sets of inverted repeat sequences within the 92-bp minimal oriT sequence were required for efficient termination. Mutant repeat A sequences lacking NikA-binding ability were found to be sufficient for termination, suggesting that the inverted repeat structures are involved in the termination process. A duplication of the DNA segment between the repeated oriTs was also found after mobilization of the plasmid carrying initiation-deficient but termination-proficient oriT and initiation-proficient but termination-deficient oriT, suggesting that the 3' terminus of the transferred strand is elongated by rolling-circle-DNA synthesis.     

DNA segments of the IncX plasmid R485 determining replication and incompatibility with plasmid R6K

The expression of incompatibility properties between the IncX plasmids R6K and R485 of Escherichia coli was examined. For small autonomously replicating derivatives of both plasmid elements, the requirements for incompatibility expression include a functional R485 replicon and an active R6K beta-origin region. Functional R6K alpha and gamma origins are not directly involved in incompatibility expression between R6K and R485. A trans-acting replication system was constructed for plasmid R485. It consists of a 3.2-(kb) DNA fragment of R485 that specifies a product(s) in trans which supports replication from an R485 origin plasmid. A minimal R485 origin region of 591 bp was derived utilizing this trans-acting replication system and the nucleotide sequence of this origin region determined. The most striking feature of the sequence is the presence of six tandem 22-bp nucleotide sequence direct repeats.     

Genetic organization of plasmid R1162 DNA involved in conjugative mobilization.

DNA involved in the mobilization of broad-host-range plasmid R1162 was localized to a region of 2.7 kilobases within coordinates 3.4 to 6.1 kilobases on the R1162 map. By examining the transfer properties of plasmids containing cloned fragments of DNA from within this region, we showed that at least four trans-active products and a cis-active site (oriT) were involved in mobilization. A cloned DNA fragment of 155 base pairs was capable of providing full oriT activity. This fragment was located within 600 base pairs of DNA containing the origin of replication of R1162, and its nucleotide sequence and that of neighboring DNA were determined. Activation of oriT required R1162-encoded, trans-acting products. Deletions which resulted in the loss of one or more of these had a variable effect on transfer efficiency and indicated the presence of both essential and nonessential Mob products. Regions encoding these products flanked oriT and in one case appeared to overlap a gene essential for plasmid replication. The implications of these findings with respect to the broad host range of R1162 are discussed.     

Genetic analysis of the minimal replicon of the Lactococcus lactis subsp. lactis biovar diacetylactis citrate plasmid

Using a combination of mutagenesis with the transposon and polymerase chain reaction subcloning, the essential elements of the replication region of the Lactococcus lactis subsp. lactis biovar diacetylactis citrate plasmid have been identified. An open reading frame, coding for a protein with homology to Rep proteins from other Lactococcus plasmids, is essential. This protein is trans-acting and could not be replaced by the Rep protein from another Lactococcus plasmid. A second open reading frame immediately downstream from the first could be removed or inactivated with no apparent effect on plasmid replication. A region containing two 10 by direct repeats and three tandem repeats of a 22 by sequence, immediately upstream of the essential open reading frame, is also essential and probably includes the origin of replication. A 181-bp DNA fragment containing this region was sufficient to allow replication in Lactococcus if the trans-acting protein was provided on another replicon. Single-stranded replication intermediates could not be detected, suggesting that the citrate plasmid uses theta replication rather than rolling-circle replication.     

Characterization of the cryptic plasmid pBGR1 from Bartonella grahamii and construction of a versatile Escherichia coli-Bartonella spp. shuttle cloning vector

We report herein the isolation and molecular characterization of pBGR1, the first native plasmid isolated from the genus Bartonella. Cloning and sequencing revealed a 2725-base pair (bp) cryptic plasmid comprising two open reading frames of considerable length, which were designated rep and mob. The regions containing rep and mob are separated by 140-bp inverted repeat sequences and display a difference in G + C content from one another. A 1435-bp SacI-BclI fragment containing the rep gene is sufficient to mediate replication in the species Bartonella henselae and Bartonella tribocorum, while this replicon does not appear to be functional in Escherichia coli. The Rep protein of 190 amino acids (aa) shares homology to putative replication proteins of cryptic plasmids of Gram-negative origin, which form a subgroup of the rolling-circle replication proteins of the pSN2 plasmid superfamily of Gram-positive bacteria. The Mob protein of 333 aa is related to mobilization proteins of several cryptic plasmids and is associated with a conserved recombination site A. The tra functions of RP4 can mobilize pBGR1 derivatives in a mob-dependent manner. Mobilizable pBGR1-based E. coli-Bartonella spp. shuttle vectors were constructed and were shown to be maintained in B. tribocorum during in vivo passage in a rat model in the absence of antibiotic selection. The small size and stability of these shuttle cloning vectors should render them particularly valuable for genetic studies in Bartonella spp.     

The oriT region of the conjugative transfer system of plasmid pCU1 and specificity between it and the mob region of other N tra plasmids.

The oriT region of the conjugative IncN plasmid pCU1 has been localized to a 669-bp sequence extending from pCU1 coordinates 8.48 to 9.15 kb. The nucleotide sequence of this region was determined. The region is AT-rich (69% AT residues), with one 19-bp and one 81-bp sequence containing 79% or more AT residues. Prominent sequence features include one set of thirteen 11-bp direct repeats, a second set of two 14-bp direct repeats, six different inverted repeat sequences ranging from 6 to 10 bp in size, and two sequences showing 12 of 13 nucleotides identical to the consensus integration host factor binding sequence. Specificity between this oriT and mobilization (mob) functions encoded by the N tra system was demonstrated. This specificity is encoded by the region lying clockwise of the BglII site at coordinate 3.3 on the pCU1 map. Two N tra plasmids isolated in the preantibiotic era were unable to mobilize recombinant plasmids carrying the oriT region of pCU1 or to complement transposon Tn5 mutations in the mob region of the closely related plasmid pKM101.