Two peptide fragments G55-I72 and K97-A109 from staphylococcal nuclease exhibit different behaviors in conformational preferences for helix formation

Two synthetic peptides, SNasealpha1 and SNasealpha2, corresponding to residues G55-I72 and K97-A109, respectively, of staphylococcal nuclease (SNase), are adopted for detecting the role of helix alpha1 (E57-A69) and helix alpha2 (M98-Q106) in the initiation of folding of SNase. The helix-forming tendencies of the two SNase peptide fragments are investigated using circular dichroism (CD) and two-dimensional (2D) nuclear magnetic resonance (NMR) methods in water and 40% trifluoroethanol (TFE) solutions. The coil-helix conformational transitions of the two peptides in the TFE-H2O mixture are different from each other. SNasealpha1 adopts a low population of localized helical conformation in water, and shows a gradual transition to helical conformation with increasing concentrations of TFE. SNasealpha2 is essentially unstructured in water, but undergoes a cooperative transition to a predominantly helical conformation at high TFE concentrations. Using the NMR data obtained in the presence of 40% TFE, an ensemble of alpha-helical structures has been calculated for both peptides in the absence of tertiary interactions. Analysis of all the experimental data available indicates that formation of ordered alpha-helical structures in the segments E57-A69 and M98-Q106 of SNase may require nonlocal interactions through transient contact with hydrophobic residues in other parts of the protein to stabilize the helical conformations in the folding. The folding of helix alpha1 is supposed to be effective in initiating protein folding. The formation of helix alpha2 depends strongly on the hydrophobic environment created in the protein folding, and is more important in the stabilization of the tertiary conformation of SNase.     

Solution structure of a designed amphipathic antimicrobial synthetic peptide, PGAa

A designed peptide, PGAa showed an excellent antifungal activity as well as an efficient bactericidal activity toward gram-positive, especially in the pathogenic yeast Candida albicans 28838. The solution structures of PGAa have been determined both in 40% TFE/water solution and DPC micelle by CD and NMR spectroscopy. Based on NOEs, vicinal coupling constants, backbone amide exchange rates, and chemical shift indices, PGAa formed a long amphipathic alpha-helical conformation in both TFE and DPC micelle environments, spanning the residues Ile(2)-Ala(19) in TFE and Lys(5)-Ala(19) in DPC micelle, respectively. Solution structures suggested that the hydrophobic residues would interact with the fatty acyl chains of the lipid bilayer, while the positively charged side-chains exposed to aqueous environments. Therefore, we conclude that the alpha-helical structure as well as the highly amphiphatic nature of PGAa peptide may play a critical role in its antimicrobial activity as well as selectivities in different species.     

Conformational aspects of HIV-1 integrase inhibition by a peptide derived from the enzyme central domain and by antibodies raised against this peptide.

Monospecific antibodies were raised against a synthetic peptide K159 (SQGVVESMNKELKKIIGQVRDQAEHLKTA) reproducing the segment 147-175 of HIV-1 integrase (IN). Synthesis of substituted and truncated analogs of K159 led us to identify the functional epitope reacting with antibodies within the C-terminal portion 163-175 of K159. Conformational studies combining secondary structure predictions, CD and NMR spectroscopy together with ELISA assays, showed that the greater is the propensity of the epitope for helix formation the higher is the recognition by anti-K159. Both the antibodies and the antigenic peptide K159 exhibited inhibitory activities against IN. In contrast, neither P159, a Pro-containing analog of K159 that presents a kink around proline but with intact epitope conformation, nor the truncated analogs encompassing the epitope, were inhibitors of IN. While the activity of antibodies is restricted to recognition of the sole epitope portion, that of the antigenic K159 likely requires interactions of the peptide with the whole 147-175 segment in the protein [Sourgen F., Maroun, R.G., Frère, V., Bouziane, A., Auclair, C., Troalen, F. & Fermandjian, S. (1996) Eur. J. Biochem. 240, 765-773]. Actually, of all tested peptides only K159 was found to fulfill condition of minimal number of helical heptads to achieve the formation of a stable coiled-coil structure with the IN 147-175 segment. The binding of antibodies and of the antigenic peptide to this segment of IN hampers the binding of IN to its DNA substrates in filter-binding assays. This appears to be the main effect leading to inhibition of integration. Quantitative analysis of filter-binding assay curves indicates that two antibody molecules react with IN implying that the enzyme is dimeric within these experimental conditions. Together, present data provide an insight into the structure-function relationship for the 147-175 peptide domain of the enzyme. They also strongly suggest that the functional enzyme is dimeric. Results could help to assess models for binding of peptide fragments to IN and to develop stronger inhibitors. Moreover, K159 antibodies when expressed in vivo might exhibit useful inhibitory properties.     

Conformational analysis by NMR and distance geometry techniques of a peptide mimetic of the third helix of the Antennapedia homeodomain.

The Antennapedia homeodomain structure consists of four helices. The helices II and III are connected by a tripeptide that forms a turn, and constitute the well-known helix-turn-helix motif. The recognition helix penetrates the DNA major groove, gives specific protein-DNA contacts and forms direct, or water-mediated, intermolecular hydrogen bonds. It was suggested that helix III (and perhaps also helix IV) might represent the recognition helix of Antennapedia homeodomain, which makes contact with the surface of the major groove of the DNA. In an attempt to clarify the helix III capabilities of assuming an helical conformation when separated from the rest of the protein, we carried out the structural determination of the recognition helix III in different solvent media. The conformational study of fragments 42-53, where residues W48 and F49, not involved in the protein-DNA interaction, were substituted by two alanines, was conducted in sodium dodecyl sulfate (SDS), trifluoroethanol (TFE) and TFE/water, using circular dichroism, nuclear magnetic resonance (NMR) and distance geometry (DG) techniques. The fragment assumes a well-defined secondary structure in TFE and in TFE/water (90/10, v/v) with an alpha-helix encompassing residues 4-9, while in TFE/water (70/30, v/v) a less regular structure was found. The DG results in the micellar system evidence the presence of a distorted alpha-helical conformation involving residues 4-8. Our results reveal that the isolated Antennapedia recognition helix III tend to preserve in solution the alpha-helical conformation even if separated from the rest of the molecule.     

Synthesis and study of peptides with semirigid i and i + 7 side-chain bridges designed for alpha-helix stabilization

A search for conformational constraints on the peptide alpha-helical conformation indicated that para-substituted amino acid derivatives of a benzene ring might be suitable for linking pairs of side chains that are separated by two turns of the helix. A 14-residue synthetic, amphiphilic alpha-helical peptide model system has been used to study the helix stabilizing effects of a series of four such bridges having constitutionally isomeric structures. These bridges were used to link positions 3 and 10 of the model peptides. The peptides were synthesized in good yield by standard solid-phase methods, including cyclization on the solid support. They were then studied for their solution conformations and melting behavior by circular dichroism (CD) spectropolarimetry, and for their elution behavior on reversed-phase HPLC columns. In aqueous solution and in 50% (v/v) trifluoroethanol, the most effective bridge for helix stabilization consisted of a 4-(aminomethyl)phenylacetic acid residue (AMPA) linked by amide bonds to the side chain functional groups of a (S)-2,3-diaminopropionic acid residue (Dap) in position 3 of the model peptide and an aspartic acid residue in position 10. This Dap3(AMPA), Asp10 bridge was about as effective as two Lys(i), Asp(i+4) lactam bridges incorporated linking residues 3 and 7, and 10 and 14, in the same model peptide sequence. This suggests that it is worth about 1 kcal/mol of helix stabilization energy.     

CD and NMR investigations on trifluoroethanol-induced step-wise folding of helical segment from scorpion neurotoxin.

A 14 amino acid residue peptide from the helical region of Scorpion neurotoxin has been structurally characterized using CD and NMR spectroscopy in different solvent conditions. 2,2,2-Trifluoroethanol (TFE) titration has been carried out in 11 steps from 0 to 90% TFE and the gradual stabilization of the conformation to form predominantly alpha-helix covering all of the 14 residues has been studied by 1H and 13C NMR spectroscopy. Detailed information such as coupling constants, chemical shift indices, NOESY peak intensities and amide proton temperature coefficients at each TFE concentration has been extracted and analysed to derive the step-wise preferential stabilization of the helical segments along the length of the peptide. It was found that there is a finite amount of the helical conformation in the middle residues 5-11 even at low TFE concentrations. It was also observed that > 75% TFE (v/v) is required for the propagation of the helix to the N and C termini and for correct packing of the side chains of all of the residues. These observations are significant to understanding the folding of this segment in the protein and may throw light on the inherent preferences and side chain interactions in the formation of the helix in the peptide.     

Solution structure of O-glycosylated C-terminal leucine zipper domain of human salivary mucin (MUC7)

Solution structures of a 23 residue glycopeptide II (KIS* RFLLYMKNLLNRIIDDMVEQ, where * denotes the glycan Gal-beta-(1-3)-alpha-GalNAc) and its deglycosylated counterpart I derived from the C-terminal leucine zipper domain of low molecular weight human salivary mucin (MUC7) were studied using CD, NMR spectroscopy and molecular modeling. The peptide I was synthesized using the Fmoc chemistry following the conventional procedure and the glycopeptide II was synthesized incorporating the O-glycosylated building block (Nalpha-Fmoc-Ser-[Ac4-beta-D-Gal-(1,3)-Ac2-alpha-D-GalN3+ ++]-OPfp) at the appropriate position in stepwise assembly of peptide chain. Solution structures of these glycosylated and nonglycosylated peptides were studied in water and in the presence of 50% of an organic cosolvent, trifluoroethanol (TFE) using circular dichroism (CD), and in 50% TFE using two-dimensional proton nuclear magnetic resonance (2D 1H NMR) spectroscopy. CD spectra in aqueous medium indicate that the apopeptide I adapts, mostly, a beta-sheet conformation whereas the glycopeptide II assumes helical structure. This transition in the secondary structure, upon glycosylation, demonstrates that the carbohydrate moiety exerts significant effect on the peptide backbone conformation. However, in 50% TFE both the peptides show pronounced helical structure. Sequential and medium range NOEs, CalphaH chemical shift perturbations, 3JNH:CalphaH couplings and deuterium exchange rates of the amide proton resonances in water containing 50% TFE indicate that the peptide I adapts alpha-helical structure from Ile2-Val21 and the glycopeptide II adapts alpha-helical structure from Ser3-Glu22. The observation of continuous stretch of helix in both the peptides as observed by both NMR and CD spectroscopy strongly suggests that the C-terminal domain of MUC7 with heptad repeats of leucines or methionine residues may be stabilized by dimeric leucine zipper motif. The results reported herein may be invaluable in understanding the aggregation (or dimerization) of MUC7 glycoprotein which would eventually have implications in determining its structure-function relationship.     

The HIV-1 integrase α4-helix involved in LTR-DNA recognition is also a highly antigenic peptide element

Monoclonal antibodies (MAbas) constitute remarkable tools to analyze the relationship between the structure and the function of a protein. By immunizing a mouse with a 29mer peptide (K159) formed by residues 147 to 175 of the HIV-1 integrase (IN), we obtained a monoclonal antibody (MAba4) recognizing an epitope lying in the N-terminal portion of K159 (residues 147-166 of IN). The boundaries of the epitope were determined in ELISA assays using peptide truncation and amino acid substitutions. The epitope in K159 or as a free peptide (pep-a4) was mostly a random coil in solution, while in the CCD (catalytic core domain) crystal, the homologous segment displayed an amphipathic helix structure (α4-helix) at the protein surface. Despite this conformational difference, a strong antigenic crossreactivity was observed between pep-a4 and the protein segment, as well as K156, a stabilized analogue of pep-a4 constrained into helix by seven helicogenic mutations, most of them involving hydrophobic residues. We concluded that the epitope is freely accessible to the antibody inside the protein and that its recognition by the antibody is not influenced by the conformation of its backbone and the chemistry of amino acids submitted to helicogenic mutations. In contrast, the AA →Glu mutations of the hydrophilic residues Gln148, Lys156 and Lys159, known for their interactions with LTRs (long terminal repeats) and inhibitors (5CITEP, for instance), significantly impaired the binding of K156 to the antibody. Moreover, we found that in competition ELISAs, the processed and unprocessed LTR oligonucleotides interfered with the binding of MAba4 to IN and K156, confirming that the IN α4-helix uses common residues to interact with the DNA target and the MAba4 antibody. This also explains why, in our standard in vitro concerted integration assays, MAba4 strongly impaired the IN enzymatic activity.     

Conformational analysis of a mitochondrial presequence derived from the F1-ATPase beta-subunit by CD and NMR spectroscopy.

Previous studies on mitochondrial targeting presequences have indicated that formation of an amphiphillic helix may be required for efficient targeting of the precursor protein into mitochondria, but the structural details are not well understood. We have used CD and NMR spectroscopy to characterize in detail the structure of a synthetic peptide corresponding to the presequence for the beta-subunit of F1-ATPase, a mitochondrial matrix protein. Although this peptide is essentially unstructured in water, alpha-helix formation is induced when the peptide is placed in structure-promoting environments, such as SDS micelles or aqueous trifluoroethanol (TFE). In 50% TFE (by volume), the peptide is in dynamic equilibrium between random coil and alpha-helical conformations, with a significant population of alpha-helix throughout the entire peptide. The helix is somewhat more stable in the N-terminal part of the presequence (residues 4-10), and this result is consistent with the structure proposed previously for the presequence of another mitochondrial matrix protein, yeast cytochrome oxidase subunit IV. Addition of increasing amounts of TFE causes the alpha-helical content to increase even further, and the TFE titration data for the presequence peptide of the F1-ATPase beta-subunit are not consistent with a single, cooperative transition from random coil to alpha-helix. There is evidence that helix formation is initiated in two different regions of the peptide. This result helps to explain the redundancy of the targeting information contained in the presequence for the F1-ATPase beta-subunit.     

Observation of the closing of individual hydrogen bonds during TFE-induced helix formation in a peptide

Helix formation of an S-peptide analog, comprising the first 20 residues of Ribonuclease A and two additional N-terminal residues, was studied by measuring hydrogen bond (H-bond) (h3)J(NC') scalar couplings as a function of 2,2,2-trifluoroethanol (TFE) concentration. The (h3)J(NC') couplings give direct evidence for the closing of individual backbone N-H***O = C H-bonds during the TFE-induced formation of secondary structure. Whereas no (h3)J(NC') correlations could be detected without TFE, alpha-helical (i,i +4) H-bond correlations were observed for the amides of residues A5 to M15 in the presence of TFE. The analysis of individual coupling constants indicates that alpha-helix formation starts at the center of the S-peptide around residue E11 and proceeds gradually from there to both peptide ends as the TFE concentration is increased. At 60% to 90% TFE, well-formed alpha-helical H-bonds were observed for the amides hydrogens of residues K9 to Q13, whereas H-bonds of residues T5 to A8, H14, and M15 are affected by fraying. No intramolecular backbone H-bonds are present at and beyond the putative helix stop signal D16. As the (h3)J(NC') constants represent ensemble averages and the dependence of (h3)J(NC') on H-bond lengths is very steep, the size of the individual (h3)J(NC') coupling constants can be used as a measure for the population of a closed H-bond. These individual populations are in agreement with results derived from the Lifson-Roig theory for coil-to-helix transitions. The present work shows that the closing of individual H-bonds during TFE-induced helix formation can be monitored by changes in the size of H-bond scalar couplings.     

Model peptides mimic the structure and function of the N-terminus of the pore-forming toxin sticholysin II

To investigate the role of the N-terminal region in the lytic mechanism of the pore-forming toxin sticholysin II (St II), we studied the conformational and functional properties of peptides encompassing the first 30 residues of the protein. Peptides containing residues 1-30 (P1-30) and 11-30 (P11-30) were synthesized and their conformational properties were examined in aqueous solution as a function of peptide concentration, pH, ionic strength, and addition of the secondary structure-inducing solvent trifluoroethanol (TFE). CD spectra showed that increasing concentration, pH, and ionic strength led to aggregation of P1-30; as a consequence, the peptide acquired beta-sheet conformation. In contrast, P11-30 exhibited practically no conformational changes under the same conditions, remaining essentially structureless. Moreover, this peptide did not undergo aggregation. These differences clearly point to the modulating effect of the first 10 hydrophobic residues on the peptides aggregation and conformational properties. In TFE both the first ten hydrophobic peptides acquired alpha-helical conformation, albeit to a different extent, P11-30 displayed lower alpha-helical content. P1-30 presented a larger fraction of residues in alpha-helical conformation in TFE than that found in St II's crystal structure for that portion of the protein. Since TFE mimics the membrane environment, such increase in helical content could also occur upon toxin binding to membranes and represent a step in the mechanism of pore formation. The peptides conformational properties correlated well with their functional behavior. Thus, P1-30 exhibited much higher hemolytic activity than P11-30. In addition, P11-30 was able to block the toxin's hemolytic activity. The size of pores formed in red blood cells by P1-30 was estimated by measuring the permeability to PEGs of different molecular mass. The pore radius (0.95 +/- 0.01 nm) was very similar to that of the pore formed by the toxin. The results demonstrate that the synthetic peptide P1-30 is a good model of St II conformation and function and emphasize the contribution of the toxin's N-terminal region, and, in particular, the hydrophobic residues 1-10 to pore formation.     

Induction of secondary structure in a COOH-terminal peptide of histone H1 by interaction with the DNA: an infrared spectroscopy study.

We have studied the conformation of the peptide Ac-EPKRSVAFKKTKKEVKKVATPKK (CH-1), free in solution and bound to the DNA, by Fourier-transform infrared spectroscopy. The peptide belongs to the COOH-terminal domain of histone H1(0) (residues 99-121) and is adjacent to the central globular domain of the protein. In aqueous (D(2)O) solution the amide I' is dominated by component bands at 1643 cm(-1) and 1662 cm(-1), which have been assigned to random coil conformations and turns, respectively. In accordance with previous NMR results, the latter component has been interpreted as arising in turn-like conformations in rapid equilibrium with unfolded states. The peptide becomes fully structured either in 90% trifluoroethanol (TFE) solution or upon interaction with the DNA. In these conditions, the contributions of turn (1662 cm(-1)) and random coil components virtually disappear. In TFE, the spectrum is dominated by the alpha-helical component (1654 cm(-1)). The band at 1662 cm(-1) shifts to 1670 cm(-1), and has been assigned to the COOH-terminal TPKK motif in a more stable turn conformation. A band at 1637 cm(-1), also present in TFE, has been assigned to 3(10) helical structure. The amide I' band of the complexes with the DNA retains the components that were attributed to 3(10) helix and the TPKK turn. In the complexes with the DNA, the alpha-helical component observed in TFE splits into two components at 1657 cm(-1) and 1647 cm(-1). Both components are inside the spectral region of alpha-helical structures. Our results support the presence of inducible helical and turn elements, both sharing the character of DNA-binding motifs.     

Solution structure of termite-derived antimicrobial peptide,spinigerin, as determined in SDS micelle by NMR spectroscopy

Spinigerin is a linear antibacterial peptide derived from a termite insect. It consists of 25 amino acids and is devoid of cysteines. Spinigerin displays good lytic activities against Gram-positive and Gram-negative bacteria, but has no hemolytic activities against human erythrocytes. In this study, we present a three-dimensional solution structure of spinigerin in SDS micelles. According to CD data spinigerin has an alpha-helical conformation in the presence of TFE, DPC micelles, and SDS micelles. The three-dimensional structure of spinigerin as determined by NMR spectroscopy contains a stable alpha-helix from Lys4 to Thr23. Spinigerin (4-21), an 18-residue fragment from Lys4 to Leu21, contains a similar content of alpha-helical structure compared to native spinigerin and was found to retain antibacterial activity, too. Therefore, this alpha-helical structure and the strong electrostatic attraction between four Lys and three Arg residues in spinigerin and the negatively charged polar head groups of the phospholipids on the membrane surface play important roles in disrupting membrane and subsequent cell death.     

The duplication of an eight-residue helical stretch in Staphylococcal nuclease is not helical: a model for evolutionary change

A common method of evolutionary change is gene duplication, followed by other events that lead to new function, decoration of folds, oligomerization, or other changes. As part of a study on the potential for evolutionary change created by duplicated sequences, we have carried out a crystallographic study on a mutant of Staphylococcal nuclease in which residues 55-62 have been duplicated in a wild-type variant termed PHS. In the parental protein (PHS) these residues form the first two turns of a helix running from residue 54 to 68 (hereafter designated as helix I). The crystal structure of the mutant is very similar to that of the parental, with helix I being unaltered. The duplicated residues are accommodated by expanding an existing loop N-terminal to helix I. In addition, circular dichroism (CD) studies have been carried out on a parental peptide containing helix I with six flanking residues at each terminus (residues 48-74) and on the same peptide expanded by the duplication, as a function of 2,2,2-trifluoroethanol (TFE) concentration. Each peptide possesses only modest helical propensity in solution. Our data, which is different from what was observed in T4 lysozyme, show that the conformation of the duplicated sequence is determined by a balance of sequential and longer-range effects. Thus duplicating sequence need not mean duplicating structure. Proteins 2000;40:465-472.     

Helix propagation in trifluoroethanol solutions.

Helix propagation of the S-peptide sequence (residues 1-19 of ribonuclease A) in 2,2,2-trifluoroethanol (TFE) solutions has been investigated with CD and nmr Overhauser effect spectroscopies. In this study, the S-peptide helix is covalently initiated at the N-terminus through disulfide bonds to a helix scaffold derived from the N-terminal sequence of the bee venom peptide apamin. The entire S-peptide sequence of this hybrid sequence peptide becomes helical at high proportions of TFE. Residues 14-19 of the S-peptide are not helical in the free peptide in TFE, nor are they helical in ribonuclease A. The "helix stop" signal encoded by the S-peptide sequence near residue 13 does not persist at high TFE with this hybrid sequence peptide. The helix-stabilizing effects of TFE are due at least in part to facilitated propagation of an extant helix. This stabilizing effect appears to be a general solvation effect and not due to specific interaction of the helical peptide with TFE. Specifically these data support the idea that TFE destabilizes the coil state by less effective hydrogen bonding of the peptide amide to the solvent.     

A designed Zn2+-binding amphiphilic polypeptide: energetic consequences of pi-helicity.

The pi-helix is a secondary structure with 4.4 amino acids per helical turn. Although it was proposed in 1952, no experimental support for its existence was obtained until the mid-1980s. While short peptides are unlikely to assume a marginally stable secondary structure spontaneously, they might do so in the presence of appropriate structural constraints. In this paper, we describe a peptide that is designed to assume a pi-helical conformation when stabilized by cetyltrimethylammonium bromide (CTAB) micelles and Zn(2+). In the designed peptide, lipophilic amino acids are placed such that it would be amphiphilic in the pi-helical, but not in the alpha-helical, conformation. Also, two His residues are incorporated with i, i + 5 spacing, designed to allow binding of Zn(2+) in a pi-helical but not an alpha-helical conformation. The peptide was found to form moderately stable monolayers at the air-water interface, with a collapse pressure that almost doubled when there was Zn(2+) in the subphase. Also, CTAB micelles induced a marked increase in the helicity of the peptide. In 50% TFE, the peptide had a CD spectrum consistent with an alpha-helical structure. The addition of 1 mM Zn(2+) to this solvent caused a saturable decline in ellipticity to approximately half of its original value. The peptide also bound Zn(2+) when it was bound to CTAB micelles, with Zn(2+) again inducing a decrease in ellipticity. The peptide had slightly greater affinity for Zn(2+) in the presence of the CTAB than in a 50% TFE solution (K(d) = 3.1 x 10(-4) M in CTAB and 2.3 x 10(-4) M in TFE). van't Hoff analysis indicated that thermal denaturation of the peptide in 50% TFE containing 1 mM Zn(2+) was associated with both enthalpic and entropic changes that were greater than those in the absence of Zn(2+). These observations are all consistent with the proposal that the peptide assumed a pi-helical conformation in the presence of Zn(2+) and CTAB micelles, and has allowed the stability of this rare conformation to be assessed.     

DNA-induced alpha-helical structure in the NH2-terminal domain of histone H1

It is important to establish the structural properties of linker histones to understand the role they play in chromatin higher order structure and gene regulation. Here, we use CD, NMR, and IR spectroscopy to study the conformation of the amino-terminal domain of histone H1 degrees, free in solution and bound to the DNA. The NH(2)-terminal domain has little structure in aqueous solution, but it acquires a substantial amount of alpha-helical structure in the presence of trifluoroethanol (TFE). As in other H1 subtypes, the basic residues of the NH(2)-terminal domain of histone H1 degrees are clustered in its COOH-terminal half. According to the NMR results, the helical region comprises the basic cluster (Lys(11)-Lys(20)) and extends until Asp(23). The fractional helicity of this region in 90% TFE is about 50%. His(24) together with Pro(25) constitute the joint between the NH(2)-terminal helix and helix I of the globular domain. Infrared spectroscopy shows that interaction with the DNA induces an amount of alpha-helical structure equivalent to that observed in TFE. As coulombic interactions are involved in complex formation, it is highly likely in the complexes with DNA that the minimal region with alpha-helical structure is that containing the basic cluster. In chromatin, the high positive charge density of the inducible NH(2)-terminal helical element may contribute to the binding stability of the globular domain.     

Characterization of a synthetic peptide corresponding to a receptor binding domain of mouse interferon gamma.

A receptor binding region of mouse interferon gamma (IFN gamma) has previously been localized to the N-terminal 39 amino acids of the molecule by use of synthetic peptides and monoclonal antibodies. In this report, a detailed analysis of the synthetic peptide corresponding to this region, IFN gamma (1-39), is presented. Circular dichroism (CD) spectroscopy indicated that the peptide has stable secondary structure under aqueous conditions and adopts a combination of alpha-helical and random structure. A peptide lacking two N-terminal amino acids, IFN gamma (3-39), had similar secondary structure and equivalent ability to compete for receptor binding, while peptides lacking four or more N-terminal residues had reduced alpha-helical structure and did not inhibit 125I-IFN gamma binding. Substitution of proline, a helix-destabilizing amino acid, for leucine (residue 8) of a predicted amphipathic alpha-helix (residues 3-12), IFN gamma (1-39) [Pro]8, resulted in a substantial reduction in the helical content of the peptide, supporting the presence of helical structure in this region. However, destabilization of the helix did not reduce the competitive ability of the peptide. A peptide lacking eight C-terminal residues, IFN gamma (1-31), did not block 125I-IFN gamma binding and had no detectable alpha-helical structure, suggesting a requirement of the predicted second alpha-helix (residues 20-34) for receptor interaction and helix stabilization. Substitution of phenylalanine for tyrosine at position 14, IFN gamma (1-39) [Phe]14, a central location of a predicted omega-loop structure, did not affect the secondary structure associated with the region yet resulted in a 30-fold increase in receptor competition.(ABSTRACT TRUNCATED AT 250 WORDS)     

Solution structure of salmon calcitonin

Salmon calcitonin, a 32-residue peptide with a 1-7 disulfide bridge, was synthesized by standard solid-phase techniques, and studied by CD and two-dimensional NMR experiments. The peptide was dissolved in pure trifluoroethanol (TFE) and in aqueous solutions containing various amounts of TFE. CD studies in pure TFE indicated the presence of an alpha-helical structure comprising 40% of the constituent amino acids. This was fully confirmed by nmr. A detailed analysis was performed with the peptide in a 9 : 1 deuterated TFE/H2O mixture. A total of 365 nuclear Overhauser enhancements (154 intraresidual, 112 sequential and 99 long range) were complied from the nuclear Overhauser enhancement spectroscopy spectra and used in the distance geometry calculations. The core of the peptide between residues 8 and 22 assumes an alpha-helix like structure. The Cys 1-Cys 7 ring is well defined and in close association with the helix, while the C-terminal decapeptide folds back toward the core, forming a loose loop.