<Emphasis Type="Italic">Candida rugosa</Emphasis> lipase-catalyzed polyurethane degradation in aqueous medium

Candida rugosa lipase (EC 3.1.1.3) was used to degrade commercially-available solid poly(ester)urethane (Impranil) in an aqueous medium under different temperature, pH, enzyme and substrate concentrations. A mathematical model was developed and applied to represent the degradation kinetics of the solid polyurethane. Reaction optima were found to be pH 7 and 35°C. Diethylene glycol, a degradation byproduct, generation rate was measured to be 0.12 mg/l min and the activation energy was calculated as 9.121 kcal/gmol K. This information will be useful in developing bioreactors for practical applications to manage polyurethane wastes using lipase.     

Rational strategy for the production of new crude lipases from <Emphasis Type="BoldItalic">Candida rugosa</Emphasis>

Candida rugosa was cultured using different inducers (oleic acid, olive oil, sunflower oil, n-dodecanol and glycerol) as the only carbon source in batch conditions, as well as in several fed-batch fermentations (oleic acid as inducer) at variable feed rate conditions. The N-terminal analysis of each crude lipase revealed that, while the isoenzymes Lip2 and Lip3 are always secreted (at different proportions depending on the inducer), Lip1 was produced only using n-dodecanol (batch conditions) or oleic acid (fed-batch at high feed rate). The nature of the inducer controls the isoenzyme percentage; when this is fixed, as well as the feed rate in fed-batch fermentation, the isoenzymatic profile remained unaltered and the samples differed only in the activity of the lipases, as determined by heptyl oleate synthesis.     

High-yield synthesis of wax esters catalysed by modified <Emphasis Type="Italic">Candida rugosa</Emphasis> lipase

Candida rugosa lipase (CRL) was applied in a non-solvent esterification reaction to yield twelve wax esters. All products were obtained in nearly 100% yield for 10 h at 50°C when immobilized PEG₂₀₀₀-activated C. rugosa lipase was added to the reaction mixture. The surfactant had also a beneficial effect on the stability of the biocatalytic preparation with 83% of its activity conserved after the seventh run of repeated batch reactions.     

Scale-up fermentation of recombinant <Emphasis Type="Italic">Candida rugosa</Emphasis> lipase expressed in <Emphasis Type="Italic">Pichia pastoris</Emphasis> using the GAP promoter

The high-cell-density fermentation of Candida rugosa lipase in the constitutive Pichia pastoris expression system was scaled up from 5 to 800 l in series by optimizing the fermentation conditions at both lab scale and pilot scale. The exponential feeding combined with pH-stat strategy succeeded in small scale studies, while a two-stage fermentation strategy, which shifted at 48 h by fine tuning the culture temperature and pH, was assessed effective in pilot-scale fermentation. The two-stage strategy made an excellent balance between the expression of heterogeneous protein and the growth of host cells, controlling the fermentation at a relatively low cell growth rate for the constitutive yeast expression system to accumulate high-level product. A stable lipase activity of approximately 14,000 IU ml⁻¹ and a cell wet weight of ca. 500 g l⁻¹ at the 800-l scale were obtained. The efficient and convenient techniques suggested in this study might facilitate further scale-up for industrial lipase production.     

Hydrolysis of olive oil catalyzed by surfactant-coated<Emphasis Type="Italic">Candida rugosa</Emphasis> lipase in a hollow fiber membrane reactor

In this study, we invetigated the hydrolysis of olive oil catalyzed by a surfactant-coatedCandida rugosa lipase in a hydrophilic polyacrylonitrile hollow fiber membrane reactor and then compared the results to those using the native lipase. The organic phase was passed through the hollow inner fibers of the reactor and consisted of either the coated lipase and olive oil dissolved in isooctane or the coated lipase dissolved in pure olive oil. The aqueous phase was pumped through the outer space. After 12 h and with conditions of 30°C, 0.12 mg enzyme/mL and 0.62 M olive oil, the substrate conversion of the coated lipase reached 60%. This was twice the conversion for the same amount of native lipase that was pre-immobilized on the membrane surface. When using pure olive oil, after 12 h the substrate conversion of the coated lipase was 50%. which was 1.4 times higher than that of the native lipase.     

Gene analysis,optimized production and property of marine lipase from <Emphasis Type="Italic">Bacillus pumilus</Emphasis> B106 associated with South China Sea sponge <Emphasis Type="Italic">Halichondria rugosa</Emphasis>

Gene cloning, optimized production and property of marine lipase from Bacillus pumilus B106 associated with South China Sea sponge Halichondria rugosa were investigated in this paper. A lipase gene with whole ORF encoding 215 amino acids was obtained by PCR, protein domain prediction suggested that the deduced lipase belongs to α/β hydrolases family. Based on single factor Seriatim-Factorial test and Plackett–Burman experimental design, the optimal medium consisted of (per l) 12.5 ml maize oil, 5.0 g beef extract, 2.0 g PO₄ ³⁻ (0.6 g KH₂PO₄, 1.4 g K₂HPO₄), 17.15 g Mg²⁺, 5.0 g yeast extract, 2.282 g CaCl₂ and 5.0 ml Tween80 with artificial sea water. Using this optimum medium, lipase activity and cell concentration were increased by 3.54- and 1.31-fold over that of the basal medium, respectively. This lipase showed tolerance to high salinity, pH and temperature. About 10–20% methanol exhibited a stimulatory effect on the lipase activity, while activity was inhibited by 30–40% methanol, 2-propanol, DMSO, and ethanol. This study provides a valuable resource for marine lipase production and extends our understanding of the possible role of sponge-associated bacteria in the biotransformation of chemical compounds for the sponge host.     

Molecular subtyping of clinical isolates of <Emphasis Type="Italic">Candida albicans</Emphasis> and identification of <Emphasis Type="Italic">Candida dubliniensis</Emphasis>in Malaysia

The genotypes of 221 recent isolates of Candida albicans from various clinical specimens of 213 patients admitted to the University Malaya Medical Centre, Malaysia was determined based on the amplification of a transposable intron region in the 25 S rRNA gene. The analyses of 178 C. albicansisolated from nonsterile clinical specimens showed that they could be classified into three genotypes: genotype A (138 isolates), genotype B (38 isolates) and genotype C (2 isolates). The genotyping of 43 clinical isolates from sterile specimens showed that they belonged to genotype A (29 isolates), genotype B (10 isolates), genotype C (2 isolates) and genotype D (2 isolates). The overall distribution of C. albicans genotypes in sterile and nonsterile specimens appeared similar, with genotype A being the most predominant type. This study reported the identification of C. dubliniensis (genotype D) in 2 HIV-negative patients with systemic candidiasis, which were missed by the routine mycological procedure. The study demonstrated the genetic diversity of clinical isolates of C. albicans in Malaysia.     

Four novel <Emphasis Type="Italic">Candida</Emphasis> species in the <Emphasis Type="Italic">Candida albicans</Emphasis>/<Emphasis Type="Italic">Lodderomyces elongisporus</Emphasis> clade isolated from the gut of flower beetles

Flower-visiting beetles belonging to three species of Cetoniidae were collected on three mountains near Beijing, China, and yeasts were isolated from the gut of the insects collected. Based on the 26S rDNA D1/D2 domain and internal transcribed spacer (ITS) region sequence analysis and phenotypic characterization, four novel anamorphic yeast species located in the Candida albicans/Lodderomyces elongisporus clade were identified from 18 of the strains isolated. The new species and type strains are designated as Candida blackwellae AS 2.3639^T (=CBS 10843^T), Candida jiufengensis AS 2.3688^T (=CBS 10846^T), Candida oxycetoniae AS 2.3656^T (=CBS 10844^T), and Candida pseudojiufengensis AS 2.3693^T (=CBS 10847^T). C. blackwellae sp. nov. was basal to the branch formed by C. albicans and C. dubliniensis with moderately strong bootstrap support. The closest relative of C. oxycetoniae was L. elongisporus. C. jiufengensis sp. nov. and C. pseudojiufengensis sp. nov. were closely related with each other and formed a branch in a subclade represented by C. parapsilosis and L. elongisporus.     

The <Emphasis Type="Italic">Caenorhabditis</Emphasis><Emphasis Type="Italic">briggsae</Emphasis> genome contains active <Emphasis Type="Italic">CbmaT1</Emphasis> and <Emphasis Type="Italic">Tcb1</Emphasis> transposons

The maT clade of transposons is a group of transposable elements intermediate in sequence and predicted protein structure to mariner and Tc transposons, with a distribution thus far limited to a few invertebrate species. We present evidence, based on searches of publicly available databases, that the nematode Caenorhabditis briggsae has several maT-like transposons, which we have designated as CbmaT elements, dispersed throughout its genome. We also describe two additional transposon sequences that probably share their evolutionary history with the CbmaT transposons. One resembles a fold back variant of a CbmaT element, with long (380-bp) inverted terminal repeats (ITRs) that show a high degree (71%) of identity to CbmaT1. The other, which shares only the 26-bp ITR sequences with one of the CbmaT variants, is present in eight nearly identical copies, but does not have a transposase gene and may therefore be cross mobilised by a CbmaT transposase. Using PCR-based mobility assays, we show that CbmaT1 transposons are capable of excising from the C. briggsae genome. CbmaT1 excised approximately 500 times less frequently than Tcb1 in the reference strain AF16, but both CbmaT1 and Tcb1 excised at extremely high frequencies in the HK105 strain. The HK105 strain also exhibited a high frequency of spontaneous induction of unc-22 mutants, suggesting that it may be a mutator strain of C. briggsae.     

Floral development and systematic position of <Emphasis Type="Italic">Arillastrum</Emphasis>, <Emphasis Type="Italic">Allosyncarpia</Emphasis>, <Emphasis Type="Italic">Stockwellia</Emphasis> and <Emphasis Type="Italic">Eucalyptopsis</Emphasis> (Myrtaceae)

We have investigated the floral ontogeny of Arillastrum, Allosyncarpia, Stockwellia and Eucalyptopsis (of the eucalypt group, Myrtaceae) using scanning electron microscopy and light microscopy. Several critical characters for establishing relationships between these genera and to the eucalypts have been determined. The absence of compound petaline primordia in Arillastrum, Allosyncarpia, Stockwellia and Eucalyptopsis excludes these taxa from the eucalypt clade. Post-anthesis circumscissile abscission of the hypanthium above the ovary in Stockwellia, Eucalyptopsis and Allosyncarpia is evidence that these three taxa form a monophyletic group; undifferentiated perianth parts and elongated fusiform buds are characters that unite Stockwellia and Eucalyptopsis as sister taxa. No floral characters clearly associate Arillastrum with either the eucalypt clade or the clade of Stockwellia, Eucalyptopsis and Allosyncarpia.We gratefully acknowledge Clyde Dunlop and Bob Harwood (Northern Territory Herbarium) for collecting specimens of Allosyncarpia, and Bruce Gray (Atherton) for collecting specimens of Stockwellia. The Australian National Herbarium (CANB) kindly lent herbarium specimens of Eucalyptopsis for examination. This research was supported by a University of Melbourne Research Development Grant to Andrew Drinnan.     

Uricase production by a recombinant <Emphasis Type="Italic">Hansenula polymorpha</Emphasis> strain harboring <Emphasis Type="Italic">Candida utilis</Emphasis> uricase gene

Uricase is an important medical enzyme which can be used to determine urate in clinical analysis, to therapy gout, hyperuricemia, and tumor lysis syndrome. Uricase of Candida utilis was successfully expressed in Hansenula polymorpha under the control of methanol oxidase promoter using Saccharomyces cerevisiae alpha-factor signal peptide as the secretory sequence. Recombinant H. polymorpha MU200 with the highest extracellular uricase production was characterized with three copies of expression cassette and selected for process optimization for the production of recombinant enzyme. Among the parameters investigated in shaking flask cultures, the pH value of medium and inoculum size had great influence on the recombinant uricase production. The maximum extracellular uricase yield of 2.6 U/ml was obtained in shaking flask culture. The yield of recombinant uricase was significantly improved by the combined use of a high cell-density cultivation technique and a pH control strategy of switching culture pH from 5.5 to 6.5 in the induction phase. After induction for 58 h, the production of recombinant uricase reached 52.3 U/ml (about 2.1 g/l of protein) extracellularly and 60.3 U/ml (about 2.4 g/l) intracellularly in fed-batch fermentation, which are much higher than those expressed in other expression systems. To our knowledge, this is the first report about the heterologous expression of uricase in H. polymorpha.     

Phylogenetic analyses of <Emphasis Type="Italic">Uromyces viciae-fabae</Emphasis> and its varieties on <Emphasis Type="Italic">Vicia</Emphasis>, <Emphasis Type="Italic">Lathyrus</Emphasis>, and <Emphasis Type="Italic">Pisum</Emphasis> in Japan

A pea rust fungus, Uromyces viciae-fabae, has been classified into two varieties, var. viciae-fabae and var. orobi, based on differences in urediniospore wall thickness and putative host specificity in Japan. In principal component analyses, morphological features of urediniospores and teliospores of 94 rust specimens from Vicia, Lathyrus, and Pisum did not show definite host-specific morphological groups. In molecular analyses, 23 Uromyces specimens from Vicia, Lathyrus, and Pisum formed a single genetic clade based on D1/D2 and ITS regions. Four isolates of U. viciae-fabae from V. cracca and V. unijuga could infect and sporulate on P. sativum. These results suggest that U. viciae-fabae populations on different host plants are not biologically differentiated into groups that can be recognized as varieties.Contribution no. 184, Laboratory of Plant Parasitic Mycology, Institute of Agriculture and Forestry, University of Tsukuba, Japan     

<Emphasis Type="Italic"> Cis</Emphasis>-acting elements sufficient for induction of<Emphasis Type="Italic"> FDH1</Emphasis> expression by formate in the methylotrophic yeast<Emphasis Type="Italic"> Candida boidinii</Emphasis>

The FDH1 gene of Candida boidinii encodes an NAD⁺-dependent formate dehydrogenase, which catalyzes the last reaction in the methanol dissimilation pathway. FDH1 expression is strongly induced by methanol, as are the promoters of the genes AOD1 (alcohol oxidase) and DAS1 (dihydroxyacetone synthase). FDH1 expression can be induced by formate when cells are grown on a medium containing glucose as a carbon source, whereas expression of AOD1 and DAS1 is completely repressed in the presence of glucose. Using deletion analyses, we identified two cis-acting regulatory elements, termed UAS-FM and UAS-M, respectively, in the 5 non-coding region of the FDH1 gene. Both elements were necessary for full induction of the FDH1 promoter by methanol, while only the UAS-FM element was required for full induction by formate. Irrespective of whether induction was achieved with methanol or formate, the UAS-FM element enhanced the level of induction of the FDH1 promoter in a manner dependent on the number of copies, but independent of their orientation, and also converted the ACT1 promoter from a constitutive into an inducible element. Our results not only provide a powerful promoter for heterologous gene expression, but also yield insights into the mechanism of regulation of FDH1 expression at the molecular level.Communicated by C. P. Hollenberg     

Characterization of Switch Phenotypes in <Emphasis Type="Italic">Candida albicans</Emphasis> Biofilms

The aim of this study was to characterize switch phenotypes in Candida albicans biofilms. Cells of Candida albicans 192887g biofilms (24 h) were resuspended and these together with their planktonic counterparts were separately inoculated on Lee’s medium agar supplemented with arginine and zinc, at 25 °C for 9 days, for colony formation. The different switch phenotypes, as reflected by varying colony morphologies, were then examined for their (i) stability under various growth conditions, (ii) carbohydrate assimilation profiles, (iii) susceptibility to the polyene antifungal, nystatin, (iv) adhering and biofilm-forming ability, (v) filamentation, and (vi) growth rate in yeast nitrogen base medium supplemented with 100 mM glucose. Our data showed that the frequency of phenotypic switching in C. albicans biofilms was approximately 1%. Compared with the planktonic yeasts, cells derived from candidal biofilms generated one of the phenotypes less frequently (Chi-square-tests: P = 0.017). The five phenotypes derived from the biofilm growth demonstrated differing profiles for carbohydrate assimilation, adhesion, biofilm formation, filamentation, and growth rate. These findings reported here, for the first time, imply that phenotypic switching in the candidal biofilms differs from that in the planktonic growth, and affects multiple biological attributes.     

Novel<Emphasis Type="Italic"> eceriferum</Emphasis> mutants in<Emphasis Type="Italic"> Arabidopsis thaliana</Emphasis>

We conducted a novel non-visual screen for cuticular wax mutants in Arabidopsis thaliana (L.) Heynh. Using gas chromatography we screened over 1,200 ethyl methane sulfonate (EMS)-mutagenized lines for alterations in the major A. thaliana wild-type stem cuticular chemicals. Five lines showed distinct differences from the wild type and were further analyzed by gas chromatography and scanning electron microscopy. The five mutants were mapped to specific chromosome locations and tested for allelism with other wax mutant loci mapping to the same region. Toward this end, the mapping of the cuticular wax (cer) mutants cer10 to cer20 was conducted to allow more efficient allelism tests with newly identified lines. From these five lines, we have identified three mutants defining novel genes that have been designated CER22, CER23, and CER24. Detailed stem and leaf chemistry has allowed us to place these novel mutants in specific steps of the cuticular wax biosynthetic pathway and to make hypotheses about the function of their gene products.Abbreviations EMS Ethyl methane sulfonate - SEM Scanning electron microscopy - SSLP Simple sequence length polymorphism - WT Wild type     

Simplified soy molasses-based medium for reduced-cost production of sophorolipids by <Emphasis Type="Italic">Candida bombicola</Emphasis>

A simplified medium containing only soy molasses and oleic acid as ingredients was developed for the production of sophorolipids (SLs) from Candida bombicola. We achieved a product yield of 53 ± 3 g of purified sophorolipids per liter of starting culture volume, which is 71 ± 4% of the yield obtained with growth medium that also additionally contains the costly yeast extract and urea as nitrogen source. The large majority of the SL components existed in the lactone form (87%), and the predominant component is SL containing (ω-1)-hydroxyoleic acid as the lipid moiety. The study demonstrated for the first time the usefulness of the low-value soy molasses as a combined nitrogen- and carbon-source for SL production at a reduced cost. Mention of trade names or commercial products in this article is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the U.S. Department of Agriculture.     

Transgenic rice as a novel production system for <Emphasis Type="Italic">Melanocarpus</Emphasis> and <Emphasis Type="Italic">Pycnoporus</Emphasis> laccases

Laccases have numerous biotechnological applications, among them food processing. The widespread use of laccases has increased the demand for an inexpensive and safe source of recombinant enzyme. We explored the use of a rice-based system for the production of two fungal laccases derived from the ascomycete Melanocarpus albomyces and the basidiomycete Pycnoporus cinnabarinus. High-expression levels of active recombinant laccases were achieved by targeting expression to the endosperm of rice seeds. The laccase cDNAs were fused to a plant-derived signal sequence for targeting to the secretory pathway, and placed under the control of a constitutive seed-specific promoter fused to an intron for enhanced expression. This construct enabled the recovery of on average 0.1-1% of soluble laccase in total soluble proteins (TSP). The highest yields of recombinant laccases obtained in rice seeds were 13 and 39 ppm for riceMaL and ricePycL, respectively. The rice-produced laccases were purified and characterized. The wild-type and the recombinant proteins showed similar biochemical features in terms of molecular mass, pI, temperature and optimal pH and the N-terminus was correctly processed. Although presenting lower kinetic parameters, the rice-produced laccases were also suitable for the oxidative cross-linking of a food model substrate [maize-bran feruloylated arabinoxylans (AX)].     

Optimal conditions for chitinase production by<Emphasis Type="Italic">Serratia marcescens</Emphasis>

A chitinase-producing bacterium was isolated from seashore mud around Beobseongpo in Chunmam province through the use of a selective enrichment culture. The best chitinase producing strain was isolated and identified asSerratia marcescens KY from its characteristics. For effective production of chitinase, optimum pH, temperature, and agitation speed were investigated in flask cultures. The optimum pH usingSerratia marcescens KY was between pH 6 and 7 and the chitinase produced was 37.9 unit/mL. On the other hand, the optimal pH of theSerratia marcescens ATCC 27117 was 7.5, and the produced amount of chitinase was 35.2 unit/mL. The optimal temperature for chitinase production forSerratia marcescens KY andSerratia marcescens ATCC 27117 was 30°C. The cell growth pattern at different temperature was almost identical to the chitinase production. To investigate the optimal shaking speed under optimal culture, speeds were varied in the range of 0≈300 rpm. The maximum production of chitinase was carried at 200 rpm although the cell growth was the highest at 150 rpm. It indicates that oxygen adjustment is required for the maximum chitinase production. Using optimal conditions, batch cultures for comparingSerratia marcescens KY andSerratia marcescens ATCC 27117 were carried out in a 5 L fermentor. The oxygen consumption was increased with the increase of culture. Especially, at 120 h of cultureSerratia marcescens KY andSerratia marcescens ATCC 27117 produced 38.3 unit/mL, and 33.5 unit/mL, respectively.     

The visual perceptual range of a lizard, <Emphasis Type="Italic">Tiliqua rugosa</Emphasis>

The fragmentation of landscapes produces habitat gaps where the distance between visual landmarks may exceed the perceptual range of a species and impose navigational constraints. We estimated the visual perceptual range of the Australian sleepy lizard, Tiliqua rugosa, by releasing individuals in the centre of a cleared arena in high temperature conditions, with a 0.5-m-high bush placed either 10, 20 or 30 m from the release site. Lizards were more likely to locate those bushes and shelter under them when they were closer, and no lizards found a bush at 30 m. In addition, lizards were less likely to move from the release point when bushes were at 30 m than when they were at the two closer distances. These data suggest that for sleepy lizards the perceptual range for a 0.5-m-high bush is about 20 m. In the uncleared chenopod shrub-land where these lizards live, suitable shelter bushes are an average of 10.5 m from any point in their home range, well within their perceptual range.