Remarkable stability of Candida antarctica lipase B immobilized via cross-linking aggregates (CLEA) in deep eutectic solvents

The combination of Deep-eutectic-solvents (DES) with water as “co-solvent” enables a low-viscous reaction medium that keeps its “non-conventional” nature and thus enables synthetic lyophilization reactions (e.g. esterification) catalyzed by hydrolases. Substrates with different polarity may be employed. This paper shows how the enzyme immobilization with cross-linking aggregates (CLEA) leads to highly stable and active immobilized catalysts in different DES. As a remarkable case, when choline chloride-glycerol DES is used, CLEA derivatives of Candida antarctica lipase B (CLEA-CALB) are stable for at least 14?days without any loss of activity. The immobilized biocatalysts are applied in non-viscous DES-water blends (8% v/v) to catalyze the esterification of benzoic acid and glycerol to furnish glyceryl monobenzoate (α-MBG) in productivities of ～35?g α-MBG L^?1d^?1. Compared to other commercial immobilized CALB, the CLEA-CALB derivatives rendered more product (higher conversions by 30%). Moreover, CLEA derivatives were successfully reused for six times without any loss of activity. Given the ease of immobilization (CLEA), their excellent performance in DES and the low viscosity of the DES-water blends, the reported approach may be useful for many synthetic procedures and even for continuous processes with largely optimized outcomes.     

Candida antarctica lipase B catalyzed enantioselective acylation of pyrimidine acyclonucleoside

Abstract

The influence of solvent and acyl group donor on selectivity of the transesterification reaction of 1-[1′,3′-dihydroxy-2′-propoxymethyl]-5-methyluracil, a structural analogue of ganciclovir was examined. Lipase (EC 3.1.1.3) B from Candida antarctica (CALB) enabled desymmetrization of prochiral hydroxyl groups when 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim][PF₆]) was used as a reaction medium. It was observed that CALB was up to 2.7–4 times more enantioselective in the ionic liquid [Bmim][PF₆] than in conventional organic solvents.     

Ester synthesis from trimethylammonium alcohols in dry organic media catalyzed by immobilized Candida antarctica lipase B

Twenty-one different organic solvents were assayed as possible reaction media for the synthesis of butyryl esters from trimethylammonium alcohols in dry conditions catalyzed by immobilized Candida antarctica lipase B. The reactions were carried out following a transesterification kinetic approach, using choline and L-carnitine as primary and secondary trimethylammonium alcohols, respectively, and vinyl butyrate as acyl donor. The synthetic activity of the enzyme was strictly dependent on the water content, the position of the hydroxyl group in the trimethylammonium molecule, and the Log P parameter of the assayed solvent. Anhydrous conditions and a high excess of vinyl butyrate over L-carnitine were necessary to synthesize butyryl-L-carnitine. The synthetic reaction rates of butyryl choline were practically 100-fold those of butyryl-L-carnitine with all the assayed solvents. In both cases, the synthetic activity of the enzyme was dependent on the hydrophobicity of the solvent, with the optimal reaction media showing a Log P parameter of between -0.5 and 0.5. In all cases, 2-methyl-2-propanol and 2-methyl-2-butanol were shown to be the best solvents for both their high synthetic activity and negligible loss of enzyme activity after 6 days.     

Solvent as a competitive inhibitor for Candida antarctica lipase B

In enzyme-catalyzed reactions, the choice of solvent often has a marked effect on the reaction outcome. In this paper, it is shown that solvent effects could be explained by the ability of the solvent to act as a competitive inhibitor to the substrate. Experimentally, the effect of six solvents, 2-pentanone, 3-pentanone, 2-methyl-2-pentanol, 3-methyl-3-pentanol, 2-methylpentane and 3-methylpentane, was studied in a solid/gas reactor. As a model reaction, the CALB-catalyzed transacylation between methyl propanoate and 1-propanol, was studied. It was shown that both ketones inhibited the enzyme activity whereas the tertiary alcohols and the hydrocarbons did not. Alcohol inhibition constants, K(i)(I) were changed to "K(i)", determined in presence of 2-pentanone, 3-pentanone, and 3-methyl-3-pentanol, confirmed the marked inhibitory character of the ketones and an absence of inhibition of 3-methyl-3-pentanol. The molecular modeling study was performed on three solvents, 2-pentanone, 2-methyl-2-pentanol and 2-methyl pentane. It showed a clear inhibitory effect for the ketone and the tertiary alcohol, but no effect for the hydrocarbon. No change in enzyme conformation was seen during the simulations. The study led to the conclusion that the effect of added organic component on lipase catalyzed transacylation could be explained by the competitive inhibitory character of solvents towards the first binding substrate methyl propanoate.     

Chemoselective acylation of (hydroxyalkyl)phenols catalyzed by Candida antarctica lipase B

Acylation of (hydroxyalkyl)phenols with vinyl esters by lipase B from Candida antarctica proceeded smoothly in a highly chemoselective manner, affording their alkyl esters exclusively or at least predominantly. The enzyme therefore discriminates between an alcoholic hydroxyl from a phenolic hydroxyl in addition to having versatile catalytic abilities for organic synthesis.     

Transgenic rice as bioreactor for production of the Candida antarctica lipase B

Candida antarctica lipase B (CALB) is a versatile biocatalyst used for a wide range of biotransformation. Methods for low cost production of this enzyme are highly desirable. Here, we report a mass production method of CALB using transgenic rice seeds as the bioreactor. The transgenic rice transformed with the CALB gene under the control of the promoter of the rice seed storage protein GT1 was found to have accumulated a large quantity of CALB in seeds. The transgenic line with the highest lipolytic activity reached to 85 units per gram of dry seeds. One unit is defined as the amount of lipase necessary to liberate 1 μmol p‐nitrophenol from p‐nitrophenyl butyrate in 1 min. The rice recombinant lipase (rOsCALB) from this line represents 40% of the total soluble proteins in the crude seed extracts. The enzyme purified from the rice seeds had an optimal temperature of 40 °C, and optimal pH of 8.5, similar to that of the fermentation products. Test of its conversion ability as a biocatalyst for biodiesel production suggested that rOsCALB is functionally identical to the fermentation products in its industrial application.     

Esterification degree of fructose laurate exerted by Candida antarctica lipase B in organic solvents

Sugar esters of fatty acids have many applications as biocompatible and biodegradable emulsifiers, which are determined by their degrees of esterification (DE). Direct esterification of fructose with lauric acid in organic media used commercial immobilized Candida antarctica lipase B (CALB) was investigated for DE. Significant difference of DE was observed between 2-methyl-2-butanol (2M2B) and methyl ethyl ketone (MEK), as di-ester/mono-ester molar ratio of 1.05:1 in 2M2B and 2.79:1 in MEK. Fourier transform infrared (FTIR) spectra showed that the secondary structure of the enzyme binding mono-ester presented distinct difference in 2M2B and MEK. Contents of β-turn and antiparallel β-sheet of CALB in 2M2B were 26.9% and 16.2%, respectively, but 19.1% and 13.2% in MEK. To understand the relationship between the conformational changes and differences of DE, mono-ester and fatty acid were directly employed for synthesis of di-ester. The maximum initial velocity of di-ester synthesis in MEK was 0.59 mmol g (enzyme)⁻¹ h⁻¹, which was 2.19-fold as greater as that in 2M2B, indicating that CALB conformation in MEK was preferred for the synthesis of di-ester. These results demonstrated that the conformation of CALB binding mono-ester affected by organic solvents essentially determined DE.     

Aminolysis of 2-hydroxy esters catalyzed by Candida antarctica lipase

Candida antarctica lipase catalyzed the aminolysis of 2-hydroxy esters with amines in organic solvents to yield the corresponding 2-hydroxy amides. The reactions proceeded at 28–30 °C in dioxane for 6 h with 3 mM substrates with yields ranging between 45% (w/w) (for branched substrates) to 88% (w/w) (for linear substrates). Although the reaction was not enantioselective, because of its simplicity it represents an alternative method for the synthesis of functionalised amides.     

Biomimetic affinity purification of Candida antarctica lipase B

Candida antarctica lipase B (CalB) is one of the most widely used biocatalysts in organic synthesis. The traditional method for purification of CalB is a multi-step, high cost and low recovery procedure. Biomimetic affinity purification had high efficiency purification. We selected 298 ligand columns from a 700-member library of synthetic ligands to screen Pichia pastoris protein extract. Of the 298, three columns (named as A9-14, A9-10, and A11-33) had one-step purification effect, and A9-14 of these affinity ligands, had both high purification and recovery. The one-step recovery of CalB reached 73% and the purification reached 91% upon purification. The active groups of A9-14 were cyclohexylamine and propenylamine. Furthermore, both A9-14 and A9-10 had the same R1 active group of cyclohexylamine which might act the main binding role for CalB. The synthetic ligand A9-14 had a binding capacity of 0.4 mg/mL and had no negative effects on its hydrolytic activity. Unlike a natural affinity ligand, this synthetic ligand is highly stable to resist 1M NaOH, and thus has great potential for industrial scale production of CalB.     

Size as a parameter for solvent effects on Candida antarctica lipase B enantioselectivity

Changes in solvent type were shown to yield significant improvement of enzyme enantioselectivity. The resolution of 3-methyl-2-butanol catalyzed by Candida antarctica lipase B, CALB, was studied in eight liquid organic solvents and supercritical carbon dioxide, SCCO(2). Studies of the temperature dependence of the enantiomeric ratio allowed determination of the enthalpic (Delta(R-S)Delta H(++)) as well as the entropic (Delta(R-S)Delta S(++)) contribution to the overall enantioselectivity (Delta(R-S)Delta G(++)= -RTlnE). A correlation of the enantiomeric ratio, E, to the van der Waals volume of the solvent molecules was observed and suggested as one of the parameters that govern solvent effects on enzyme catalysis. An enthalpy-entropy compensation relationship was indicated between the studied liquid solvents. The enzymatic mechanism must be of a somewhat different nature in SCCO(2), as this reaction in this medium did not follow the enthalpy-entropy compensation relation.     

The effect of ionic liquid media on activity,selectivity and stability of Candida antarctica lipase B in transesterification reactions

Nineteen different 1,3-dialkylimidazolium-based ionic liquids (ILs) were used as reaction media for the synthesis of butyl butyrate by transesterification from vinyl butyrate and 1-butanol catalyzed by Candida antarctica lipase B (CaLB). The reaction was also carried out in hexane as a reference solvent. In all the water-immiscible ILs assayed, the enzymatic activity and selectivity were higher than that obtained in hexane. However, in water-miscible ILs, the activity was lower than in the reference solvent, although they showed >99.99% selectivity. Two solvent properties, hydrophobicity and nucleophilicity, were considered key parameters for analyzing the behavior of CaLB in ILs. In the case of ILs based on the same anion, the synthetic activity was gradually enhanced by increasing cation hydrophobicity. Furthermore, the activity of CaLB was greater in ILs containing anions of lower nucleophilicity. Stability studies indicate that CaLB exhibited greater stability in water-immiscible ILs than in water-miscible ILs.     

Regioselective acylation of disaccharides in tert-butyl alcohol catalyzed by Candida antarctica lipase

The acylation of several disaccharides by ethyl butanoate and ethyl dodecanoate was catalyzed by Candida antarctica lipase in tert-butyl alcohol, at temperatures ranging from 40 degrees to 82 degrees C (reflux temperature). The relative reaction rates of the various disaccharides were directly related to their solubility. The primary products were the monoesters derived from acylation of the primary alcohol groups. At higher conversions diesters were formed, and the ratio of diester to monoester was markedly dependent on the structure of the disaccharide. Thus, reaction of maltose with ethyl dodecanoate in refluxing tert-butyl alcohol afforded the 6'-monododecanoate even at high conversions. Trehalose, in contrast, afforded the 6,6'-diester. Acylation of the less soluble sucrose and lactose was much slower, but a moderate (37%) conversion of sucrose was observed after a prolonged reaction time (7 days). A number of other lipases and proteases were tested but C. antarctica lipase was unique in catalyzing the acylation of sucrose in refluxing tert-butyl alcohol. (c) 1996 John Wiley & Sons, Inc.     

Kinetic model of biodiesel production using immobilized lipase Candida antarctica lipase B

We have designed a kinetic model of biodiesel production using Novozym 435 (Nz435) with immobilized Candida antarctica lipase B (CALB) as a catalyst. The scheme assumed reversibility of all reaction steps and imitated phase effects by introducing various molecular species of water and methanol. The global model was assembled from separate reaction blocks analyzed independently. Computer simulations helped to explore behavior of the reaction system under different conditions. It was found that methanolysis of refined oil by CALB is slow, because triglycerides (T) are the least reactive substrates. Conversion to 95% requires 1.5–6 days of incubation depending on the temperature, enzyme concentration, glycerol inhibition, etc. Other substrates, free fatty acids (F), diglycerides (D) and monoglycerides (M), are utilized much faster (1–2 h). This means that waste oil is a better feedstock for CALB. Residual enzymatic activity in biodiesel of standard quality causes increase of D above its specification level because of the reaction 2M ↔ D + G. Filtration or alkaline treatment of the product prior to storage resolves this problem. The optimal field of Nz435 application appears to be decrease of F, M, D in waste oil before the conventional alkaline conversion. Up to 30-fold reduction of F-content can be achieved in 1–2 h, and the residual enzyme (if any) does not survive the following alkaline treatment.     

The atypical lipase B from Candida antarctica is better adapted for organic media than the typical lipase from Thermomyces lanuginosa

Candida antarctica lipase B (CALB) and Thermomyces lanuginosa lipase (TLL) were evaluated as catalysts in different reaction media using hydrolysis of tributyrin as model reaction. In o/w emulsions, the enzymes were used in the free form and for use in monophasic organic media, the lipases were adsorbed on porous polypropylene (Accurel EP-100). In monophasic organic media, the highest specific activity of both lipases was obtained in pure tributyrin at a water activity of >0.5 and at an enzyme loading of 10 mg/g support. With tributyrin emulsified in water, the specific activities were 2780 micromol min(-1) mg(-1) for TLL and 535 micromol min(-1) mg(-1) for CALB. Under optimal conditions in pure tributyrin, CALB expressed 49% of the activity in emulsion (264 micromol min(-1) mg(-1)) while TLL expressed only 9.2% (256 micromol min(-1) mg(-1)) of its activity in emulsion. This large decrease is probably due to the structure of TLL, which is a typical lipase with a large lid domain. Conversion between open and closed conformers of TLL involves large internal movements and catalysis probably requires more protein mobility in TLL than in CALB, which does not have a typical lid region. Furthermore, TLL lost more activity than CALB when the water activity was reduced below 0.5, which could be due to further reduction in protein mobility.     

Screening of solvents for favoring hydrolytic activity of Candida antarctica Lipase B

Bioprocess and Biosystems Engineering - Lipases are a group of enzymes of considerable significance in organic synthesis, among which Candida antarctica lipase B (CALB) is one of the most widely...     

Functional expression of Candida antarctica lipase B in Eschericha coli

Candida antarctica lipase B (CalB) is an important catalyst in bio-organic synthesis. To optimize its performance, either the reaction medium is changed or the lipase itself is modified. In the latter case, mutants are generated in Eschericha coli and subsequently expressed in fungal hosts for their characterization. Here we present the functional expression of CalB in the periplasm of E. coli. By step-wise deletion of the CalB signal and propeptide we were able to express and purify two different variants of CalB (mature CalB and CalB with its propeptide). A N-terminal FLAG and a C-terminal His tag were used for the purification. For the substrates para-nitrophenol butyrate (p-NPB), para-nitrophenol laurate (p-NPL) and carboxyfluorescein diacetate (CFDA) the specific activity was shown to be similar to CalB expressed in Aspergillus oryzae. The kinetic constants k(M), v(max) and k(cat) were determined using the substrates p-NPB and p-NPL. Almost identical k(cat)/k(M) values (0.423-0.466 min(-1) microM(-1) for p-NPB and 0.068-0.071 min(-1) microM(-1) for p-NPL) were obtained for the CalB variants from E. coli and A. oryzae. The results clearly show that CalB can be functionally expressed in E. coli and that the attachment of tags does not alter the properties of the lipase.     

Improved triglyceride transesterification by circular permuted Candida antarctica lipase B

Lipases represent a versatile class of biocatalysts with numerous potential applications in industry including the production of biodiesel via enzyme‐catalyzed transesterification. In this article, we have investigated the performance of cp283, a variant of Candida antarctica lipase B (CALB) engineered by circular permutation, with a series of esters, as well as pure and complex triglycerides. In comparison with wild‐type CALB, the permutated enzyme showed consistently higher catalytic activity (2.6‐ to 9‐fold) for trans and interesterification of the different substrates with 1‐butanol and ethyl acetate as acyl acceptors. Differences in the observed rates for wild‐type CALB and cp283 are believe to be related to changes in the rate‐determining step of the catalytic cycle as a result of circular permutation. Biotechnol. Bioeng. 2010;105: 44–50. © 2009 Wiley Periodicals, Inc.     

Regioselective acylation of flavonoids catalyzed by immobilized Candida antarctica lipase under reduced pressure

A single-step acylation of rutin and naringin, catalyzed by immobilized Candida antarctica lipase B in 2-methyl-2-butanol, occurred preferentially on the primary hydroxyl group. Using palmitic methyl ester as acyl donor, the acylation rate of naringin was 10-fold higher than that of rutin. Under optimal conditions, i.e. a molar ratio acyl donor/naringin of 7:1 and 200 mbar, 92% naringin was acylated.     

Catalytic properties of Candida antarctica lipase B clusters solubilized in hexane

The objective of this work was to investigate the particle size and determine the catalytic competency of a solubilized lipase in hexane. Purified Candida antarctica lipase B (CALB) was solubilized in hexane using the non-ionic surfactant Span 60. The amount of surfactant was chosen so that complete coverage of the individual enzyme molecules with surfactant was not possible. Dynamic Light Scattering (DLS) was used to directly investigate the particle size of the solubilized entities. The enzyme was found to be solubilized in the form of clusters of lipase molecules with a radius of 37±5 nm at 42°C, which we estimate to correspond to about 1200 CALB molecules. The solubilized enzyme clusters showed lower catalytic activity in a model esterification reaction in hexane compared with a commercial immobilizate of the same enzyme (Novozym 435). Further gains in catalytic activity may be possible by striving for true molecular-level dispersion of the enzyme in hexane.     

Kinetic resolution of drug intermediates catalyzed by lipase B from Candida antarctica immobilized on immobead‐350

Novozyme 435, which is a commercial immobilized lipase B from Candida antarctica (CALB), has been proven to be inadequate for the kinetic resolution of rac‐indanyl acetate. As it has been previously described that different immobilization protocols may greatly alter lipase features, in this work, CALB was covalently immobilized on epoxy Immobead‐350 (IB‐350) and on glyoxyl‐agarose to ascertain if better kinetic resolution would result. Afterwards, all CALB biocatalysts were utilized in the hydrolytic resolution of rac‐indanyl acetate and rac‐(chloromethyl)‐2‐(o‐methoxyphenoxy) ethyl acetate. After optimization of the immobilization protocol on IB‐350, its loading capacity was 150 mg protein/g dried support. Furthermore, the CALB‐IB‐350 thermal and solvent stabilities were higher than that of the soluble enzyme (e.g., by a 14‐fold factor at pH 5–70°C and by a 11‐fold factor in dioxane 30%–65°C) and that of the glyoxyl‐agarose‐CALB (e.g., by a 12‐fold factor at pH 10–50°C and by a 21‐fold factor in dioxane 30%–65°C). The CALB‐IB‐350 preparation (with 98% immobilization yield and activity versus p‐nitrophenyl butyrate of 6.26 ± 0.2 U/g) was used in the hydrolysis of rac‐indanyl acetate using a biocatalyst/substrate ratio of 2:1 and a pH value of 7.0 at 30°C for 24 h. The conversion obtained was 48% and the enantiomeric excess of the product (e.e._p) was 97%. These values were much higher than the ones obtained with Novozyme 435, 13% and 26% of conversion and e.e.p, respectively. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:878–889, 2018