Crystal structures of decorated xylooligosaccharides bound to a family 10 xylanase from Streptomyces olivaceoviridis E-86

The family 10 xylanase from Streptomyces olivaceoviridis E-86 (SoXyn10A) consists of a GH10 catalytic domain, which is joined by a Gly/Pro-rich linker to a family 13 carbohydrate-binding module (CBM13) that interacts with xylan. To understand how GH10 xylanases and CBM13 recognize decorated xylans, the crystal structure of SoXyn10A was determined in complex with alpha-l-arabinofuranosyl- and 4-O-methyl-alpha-d-glucuronosyl-xylooligosaccharides. The bound sugars were observed in the subsites of the catalytic cleft and also in subdomains alpha and gamma of CBM13. The data reveal that the binding mode of the oligosaccharides in the active site of the catalytic domain is entirely consistent with the substrate specificity and, in conjunction with the accompanying paper, demonstrate that the accommodation of the side chains in decorated xylans is conserved in GH10 xylanases of SoXyn10A against arabinoglucuronoxylan. CBM13 was shown to bind xylose or xylooligosaccharides reversibly by using nonsymmetric sugars as the ligands. The independent multiple sites in CBM13 may increase the probability of substrate binding.     

Novel sugar-binding specificity of the type XIII xylan-binding domain of a family F/10 xylanase from Streptomyces olivaceoviridis E-86

The type XIII xylan-binding domain (XBD) of a family F/10 xylanase (FXYN) from Streptomyces olivaceoviridis E-86 was found to be structurally similar to the ricin B chain which recognizes the non-reducing end of galactose and specifically binds to galactose containing sugars. The crystal structure of XBD [Fujimoto, Z. et al. (2000) J. Mol. Biol. 300, 575-585] indicated that the whole structure of XBD is very similar to the ricin B chain and the amino acids which form the galactose-binding sites are highly conserved between the XBD and the ricin B chain. However, our investigation of the binding abilities of wt FXYN and its truncated mutants towards xylan demonstrated that the XBD bound xylose-based polysaccharides. Moreover, it was found that the sugar-binding unit of the XBD was a trimer, which was demonstrated in a releasing assay using sugar ranging in size from xylose to xyloheptaose. These results indicated that the binding specificity of the XBD was different from those of the same family lectins such as the ricin B chain. Somewhat surprisingly, it was found that lactose could release the XBD from insoluble xylan to a level half of that observed for xylobiose, indicating that the XBD also possessed the same galactose recognition site as the ricin B chain. It appears that the sugar-binding pocket of the XBD has evolved from the ancient ricin super family lectins to bind additional sugar targets, resulting in the differences observed in the sugar-binding specificities between the lectin group (containing the ricin B chain) and the enzyme group.     

High activity xylanase production by Streptomyces olivaceoviridis E-86

The effects of different factors on xylanase production by Streptomyces olivaceoviridis E-86 were studied under shake flask conditions. The best initial pH value of growth medium for xylanase production was pH 6.0. Corn cob xylan and beef peptone were the best C source and N source, respectively. The enzyme activity was doubled by addition of 1.5% (v/v) Tween-80 in the medium. By the combination of the above variables, the highest xylanase activity obtained was 1653 U/ml which is the highest ever reported from Streptomyces sp.     

Purification and characterization of a family G/11 beta-xylanase from Streptomyces olivaceoviridis E-86

A beta-xylanase (GXYN) was purified from the culture filtrate of Streptomyces olivaceoviridis E-86 by successive chromatography on DE-52, CM-Sepharose and Superose 12. The molecular mass of the xylanase was estimated to be 23 kDa, indicating that the enzyme consists of a catalytic domain only. The enzyme displayed an optimum pH of 6, a temperature optimum of 60 degrees C, a pH stability range from 2 to 11 and thermal stability up to 40 degrees C. The N-terminal amino acid sequence of GXYN was A-T-V-I-T-T-N-Q-T-G-T-N-N-G-I-Y-Y-S-F-W-, and sharing a high degree of similarity with the N-terminal sequence of xylanases B and C from Streptomyces lividans, indicating GXYN belongs to family G/11 of glycoside hydrolases. GXYN was inferior to xylanase B from Streptomyces lividans in the hydrolysis of insoluble xylan because of its lack of a xylan binding domain.     

Structure and function of a family 10 beta-xylanase chimera of Streptomyces olivaceoviridis E-86 FXYN and Cellulomonas fimi Cex

The catalytic domain of xylanases belonging to glycoside hydrolase family 10 (GH10) can be divided into 22 modules (M1 to M22; Sato, Y., Niimura, Y., Yura, K., and Go, M. (1999) Gene (Amst.) 238, 93-101). Inspection of the crystal structure of a GH10 xylanase from Streptomyces olivaceoviridis E-86 (SoXyn10A) revealed that the catalytic domain of GH10 xylanases can be dissected into two parts, an N-terminal larger region and C-terminal smaller region, by the substrate binding cleft, corresponding to the module border between M14 and M15. It has been suggested that the topology of the substrate binding clefts of GH10 xylanases are not conserved (Charnock, S. J., Spurway, T. D., Xie, H., Beylot, M. H., Virden, R., Warren, R. A. J., Hazlewood, G. P., and Gilbert, H. J. (1998) J. Biol. Chem. 273, 32187-32199). To facilitate a greater understanding of the structure-function relationship of the substrate binding cleft of GH10 xylanases, a chimeric xylanase between SoXyn10A and Xyn10A from Cellulomonas fimi (CfXyn10A) was constructed, and the topology of the hybrid substrate binding cleft established. At the three-dimensional level, SoXyn10A and CfXyn10A appear to possess 5 subsites, with the amino acid residues comprising subsites -3 to +1 being well conserved, although the +2 subsites are quite different. Biochemical analyses of the chimeric enzyme along with SoXyn10A and CfXyn10A indicated that differences in the structure of subsite +2 influence bond cleavage frequencies and the catalytic efficiency of xylooligosaccharide hydrolysis. The hybrid enzyme constructed in this study displays fascinating biochemistry, with an interesting combination of properties from the parent enzymes, resulting in a low production of xylose.     

Subunit composition of a large xylanolytic complex (xylanosome) from Streptomyces olivaceoviridis E-86

A xylanolytic complex (xylanosome) was isolated from Streptomyces olivaceoviridis E-86 grown on corncob xylan. The isolated xylanosome exhibited a high molecular mass of approximately 3.8 x 10(7) Da (weight average) using size exclusion chromatography/multi-angle laser light scattering (SEC/MALLS), and was composed of at least 8 subunits with a mass range from 12 to 60 kDa. When a SDS-polyacrylamide gel zymogram was examined, the subunits of 47, 35, 32, and 23 kDa were found to have xylanase activity, while the 30-kDa subunit had CMCase activity. According to N-terminal sequence analyses, the 47- and 23-kDa subunits were found to be identical to the two reported xylanases, namely FXYN and GXYN, of S. olivaceoviridis E-86. Both the 35- and 32-kDa subunits were found to be truncated forms of the intact FXYN xylanase that possibly resulted from the degradation by proteases. The 15-kDa subunit consisted solely the xylan-binding domain of the FXYN xylanase. The purified xylanosome appeared to bind partially to xylan and poorly to Avicel.     

Crystal structure of Streptomyces olivaceoviridis E-86 beta-xylanase containing xylan-binding domain

Xylanases hydrolyse the beta-1,4-glycosidic bonds within the xylan backbone and belong to either family 10 or 11 of the glycoside hydrolases, on the basis of the amino acid sequence similarities of their catalytic domains. Generally, xylanases have a core catalytic domain, an N and/or C-terminal substrate-binding domain and a linker region. Until now, X-ray structural analyses of family 10 xylanases have been reported only for their catalytic domains and do not contain substrate-binding domains. We have determined the crystal structure of a family 10 xylanase containing the xylan-binding domain (XBD) from Streptomyces olivaceoviridis E-86 at 1.9 A resolution. The catalytic domain comprises a (beta/alpha)(8)-barrel topologically identical to other family 10 xylanases. XBD has three similar subdomains, as suggested from a triple-repeat sequence, which are assembled against one another around a pseudo-3-fold axis, forming a galactose-binding lectin fold similar to ricin B-chain. The Gly/Pro-rich linker region connecting the catalytic domain and XBD is not visible in the electron density map, probably because of its flexibility. The interface of the two domains in the crystal is hydrophilic, where five direct hydrogen bonds and water-mediated hydrogen bonds exist. The sugar-binding residues seen in ricin/lactose complex are spatially conserved among the three subdomains in XBD, suggesting that all of the subdomains in XBD have the capacity to bind sugars. The flexible linker region enables the two domains to move independently and may provide a triple chance of substrate capturing and catalysis. The structure reported here represents an example where the metabolic enzyme uses a ricin-type lectin motif for capturing the insoluble substrate and promoting catalysis.     

An investigation of the nature and function of module 10 in a family F/10 xylanase FXYN of Streptomyces olivaceoviridis E-86 by module shuffling with the Cex of Cellulomonas fimi and by site-directed mutagenesis

Although the amino acid homology in the catalytic domain of FXYN xylanase from Streptomyces olivaceoviridis E-86 and Cex xylanase from Cellulomonas fimi is only 50%, an active chimeric enzyme was obtained by replacing module 10 in FXYN with module 10 from Cex. In the family F/10 xylanases, module 10 is an important region as it includes an acid/base catalyst and a substrate binding residue. In FXYN, module 10 consists of 15 amino acid residues, while in Cex it consists of 14 amino acid residues. The Km and kcat values of the chimeric xylanase FCF-C10 for PNP-xylobioside (PNP-X2) were 10-fold less than those for FXYN. CD spectral data indicated that the structure of the chimeric enzyme was similar to that of FXYN. Based on the comparison of the amino acid sequences of FXYN and Cex in module 10, we constructed four mutants of FXYN. When D133 or S135 of FXYN was deleted, the kinetic properties were not changed from those of FXYN. By deletion of both D133 and S135, the Km value for PNP-X2 decreased from the 2.0 mM of FXYN to 0.6 mM and the kcat value decreased from the 20 s(-1) of FXYN to 8.7 s(-1). Insertion of Q140 into the doubly deleted mutant further reduced the Km value to 0.3 mM and the kcat value to 3.8 s(-1). These values are close to those for the chimeric enzyme FCF-C10. These results indicate that module 10 itself is able to accommodate changes in the sequence position of amino acids which are critical for enzyme function. Since changes of the spatial position of these amino acids would be expected to result in enzyme inactivation, module 10 must have some flexibility in its tertiary structure. The structure of module 10 itself also affects the substrate specificity of the enzyme.     

Module shuffling of a family F/10 xylanase: replacement of modules M4 and M5 of the FXYN of Streptomyces olivaceoviridis E-86 with those of the Cex of Cellulomonas fimi

To facilitate an understanding of structure-function relationships, chimeric xylanases were constructed by module shuffling between the catalytic domains of the FXYN from Streptomyces olivaceoviridis E-86 and the Cex from Cellulomonas fimi. In the family F/10 xylanases, the modules M4 and M5 relate to substrate binding so that modules M4 and M5 of the FXYN were replaced with those of the Cex and the chimeric enzymes denoted FCF-C4, FCF-C5 and FCF-C4,5 were constructed. The k(cat) value of FCF-C5 for p-nitrophenyl-beta-D-cellobioside was similar to that of the FXYN (2.2 s(-1)); however, the k(cat) value of FCF-C4 for p-nitrophenyl-beta-D-cellobioside was significantly higher (7.0 s(-1)). The loss of the hydrogen bond between E46 and S22 or the presence of the I49W mutation would be expected to change the position of Q88, which plays a pivotal role in discriminating between glucose and xylose, resulting in the increased k(cat) value observed for FCF-C4 acting on p-nitrophenyl-beta-D-cellobioside since module M4 directly interacts with Q88. To investigate the synergistic effects of the different modules, module M10 of the FCF-C4 chimera was replaced with that of the Cex. The effects of replacement of module M4 and M10 were almost additive with regard to the K:(m) and k(cat) values.     

Rational affinity purification of native Streptomyces family 10 xylanase

Xylanase SoXyn10A from Streptomyces olivaceoviridis E-86 comprises a family 10 catalytic module linked to a family 13 carbohydrate-binding module (SoCBM13). The SoCBM13 has a beta-trefoil structure, with binding sites in each subdomain (alpha, beta and gamma). Subdomain alpha, but not subdomains beta and gamma, binds tightly to lactose. It was, therefore, thought that immobilized lactose could be used for the affinity purification of SoXyn10A. Lactosyl-Sepharose was prepared and tested as an affinity matrix. SoXyn10A produced from the cloned xyn10A gene by Escherichia coli, and native SoXyn10A in culture supernatants from S. olivaceoviridis, were purified to homogeneity in a single step by affinity chromatography using this matrix. This simple purification of SoXyn10A makes the enzyme an attractive candidate for applications requiring xylanase. The CBM also has the potential for use as an affinity tag for the purification of other proteins.     

Substrate specificity in glycoside hydrolase family 10. Structural and kinetic analysis of the Streptomyces lividans xylanase 10A

Endoxylanases are a group of enzymes that hydrolyze the beta-1, 4-linked xylose backbone of xylans. They are predominantly found in two discrete sequence families known as glycoside hydrolase families 10 and 11. The Streptomyces lividans xylanase Xyl10A is a family 10 enzyme, the native structure of which has previously been determined by x-ray crystallography at a 2.6 A resolution (Derewenda, U., Swenson, L., Green, R., Wei, Y., Morosoli, R., Shareck, F., Kluepfel, D., and Derewenda, Z. S. (1994) J. Biol. Chem. 269, 20811-20814). Here, we report the native structure of Xyl10A refined at a resolution of 1.2 A, which reveals many features such as the rare occurrence of a discretely disordered disulfide bond between residues Cys-168 and Cys-201. In order to investigate substrate binding and specificity in glycoside hydrolase family 10, the covalent xylobiosyl enzyme and the covalent cellobiosyl enzyme intermediates of Xyl10A were trapped through the use of appropriate 2-fluoroglycosides. The alpha-linked intermediate with the nucleophile, Glu-236, is in a (4)C(1) chair conformation as previously observed in the family 10 enzyme Cex from Cellulomonas fimi (Notenboom, V., Birsan, C., Warren, R. A. J., Withers, S. G., and Rose, D. R. (1998) Biochemistry 37, 4751-4758). The different interactions of Xyl10A with the xylobiosyl and cellobiosyl moieties, notably conformational changes in the -2 and -1 subsites, together with the observed kinetics on a range of aryl glycosides, shed new light on substrate specificity in glycoside hydrolase family 10.     

Binding specificity and thermodynamics of a family 9 carbohydrate-binding module from Thermotoga maritima xylanase 10A

The C-terminal family 9 carbohydrate-binding module of xylanase 10A from Thermotoga maritima (CBM9-2) binds to amorphous cellulose, crystalline cellulose, and the insoluble fraction of oat spelt xylan. The association constants (K(a)) for adsorption to insoluble polysaccharides are 1 x 10(5) to 3 x 10(5) M(-1). Of the soluble polysaccharides tested, CBM9-2 binds to barley beta-glucan, xyloglucan, and xylan. CBM9-2 binds specifically to the reducing ends of cellulose and soluble polysaccharides, a property that is currently unique to this CBM. CBM9-2 also binds glucose, xylose, galactose, arabinose, cellooligosaccharides, xylooligosaccharides, maltose, and lactose, with affinities ranging from 10(3) M(-1) for monosaccharides to 10(6) M(-1) for disaccharides and oligosaccharides. Cellooligosaccharides longer than two glucose units do not bind with improved affinity, indicating that cellobiose is sufficient to occupy the entire binding site. In general, the binding reaction is dominated by favorable changes in enthalpy, which are partially compensated by unfavorable entropy changes.     

A family 10 Thermoascus aurantiacus xylanase utilizes arabinose decorations of xylan as significant substrate specificity determinants

Xylan, which is a key component of the plant cell wall, consists of a backbone of beta-1,4-linked xylose residues that are decorated with arabinofuranose, acetyl, 4-O-methyl d-glucuronic acid and ferulate. The backbone of xylan is hydrolysed by endo-beta1,4-xylanases (xylanases); however, it is unclear whether the various side-chains of the polysaccharide are utilized by these enzymes as significant substrate specificity determinants. To address this question we have determined the crystal structure of a family 10 xylanase from Thermoascus aurantiacus, in complex with xylobiose containing an arabinofuranosyl-ferulate side-chain. We show that the distal glycone subsite of the enzyme makes extensive direct and indirect interactions with the arabinose side-chain, while the ferulate moiety is solvent-exposed. Consistent with the 3D structural data, the xylanase displays fourfold more activity against xylotriose in which the non-reducing moiety is linked to an arabinose side-chain, compared to the undecorated form of the oligosacchairde. These data indicate that the sugar decorations of xylans in the T.aurantiacus family 10 xylanase, rather than simply being accommodated, can be significant substrate specificity determinants.     

Purification and properties of a xylanase from Streptomyces lividans.

An extracellular xylanase produced by a cellulase-negative mutant strain of Streptomyces lividans 1326 was purified to homogeneity. The purified enzyme has an apparent Mr of 43,000 and pI of 5.2. The pH and temperature optima for the activity were 6.0 and 60 degrees C respectively, and the Km and Vmax. values, determined with a soluble oat spelts xylan, were 0.78 mg/ml and 0.85 mmol/min per mg of enzyme. The xylanase showed no activity towards CM-cellulose and p-nitrophenyl beta-D-xyloside. The enzyme degraded xylan, producing mainly xylobiose, a mixture of xylo-oligosaccharides and a small amount of xylose as end products. Its pattern of action on beta-1,4-D-xylan indicates that it is a beta-1,4-endoxylanase (EC 3.2.1.8).     

The 92-kDa chitinase from Streptomyces olivaceoviridis contains a lysine-C endoproteinase at its N-terminus

Abstract Serine proteinases of 42, 22 and 14 kDa were purified from the culture fluid of Streptomyces olivaceoviridis by FPLC. The first 14 amino acids at their N-termini were identical and coincide with the N-terminal amino acid sequence of 92-kDa chitinase, which was found to hydrolyse casein. The four proteins hydrolyse synthetic substrates at the carboxyl group of lysine and (more slowly) arginine. The 14-kDa endoproteinase releases only two fragments of 42 and 43 kDa from β-galactosidase. When the pure 92-kDa chitinase was incubated at 37°C in Tris·HCl buffer, it was cleaved into a 70-kDa chitinase and a 22-kDa proteinase which in its part is rapidly degraded to a 14-kDa proteinase.     

Substrate specificity in glycoside hydrolase family 10. Tyrosine 87 and leucine 314 play a pivotal role in discriminating between glucose and xylose binding in the proximal active site of Pseudomonas cellulosa xylanase 10A

The Pseudomonas family 10 xylanase, Xyl10A, hydrolyzes beta1, 4-linked xylans but exhibits very low activity against aryl-beta-cellobiosides. The family 10 enzyme, Cex, from Cellulomonas fimi, hydrolyzes aryl-beta-cellobiosides more efficiently than does Xyl10A, and the movements of two residues in the -1 and -2 subsites are implicated in this relaxed substrate specificity (Notenboom, V., Birsan, C., Warren, R. A. J., Withers, S. G., and Rose, D. R. (1998) Biochemistry 37, 4751-4758). The three-dimensional structure of Xyl10A suggests that Tyr-87 reduces the affinity of the enzyme for glucose-derived substrates by steric hindrance with the C6-OH in the -2 subsite of the enzyme. Furthermore, Leu-314 impedes the movement of Trp-313 that is necessary to accommodate glucose-derived substrates in the -1 subsite. We have evaluated the catalytic activities of the mutants Y87A, Y87F, L314A, L314A/Y87F, and W313A of Xyl10A. Mutations to Tyr-87 increased and decreased the catalytic efficiency against 4-nitrophenyl-beta-cellobioside and 4-nitrophenyl-beta-xylobioside, respectively. The L314A mutation caused a 200-fold decrease in 4-nitrophenyl-beta-xylobioside activity but did not significantly reduce 4-nitrophenyl-beta-cellobioside hydrolysis. The mutation L314A/Y87A gave a 6500-fold improvement in the hydrolysis of glucose-derived substrates compared with xylose-derived equivalents. These data show that substantial improvements in the ability of Xyl10A to accommodate the C6-OH of glucose-derived substrates are achieved when steric hindrance is removed.     

Improving the thermostability of a mesophilic family 10 xylanase,AuXyn10A,from Aspergillus usamii by in silico design

To improve the thermostability of a mesophilic GH family 10 xylanase, AuXyn10A, from Aspergillus usamii E001, its modification was performed by in silico design. Based on the comparison of B-factor values, a mutant xylanase ATXyn10 was predicted by substituting a segment YP from Tyr²⁵ to Pro³⁴ of AuXyn10A with the corresponding one from Asn²⁴ to Ala³² of TaXyn10, a thermophilic GH family 10 xylanase from Thermoascus aurantiacus. Analysis of a TaXyn10 crystal structure indicated that there is a close interaction between segments YP and FP. For that reason, another mutant xylanase ATXyn10^M was designed by mutating Ser²⁸⁶ and His²⁸⁸ of ATXyn10 into the corresponding Gly²⁸⁵ and Phe²⁸⁷ in the FP of TaXyn10. Then, two ATXyn10- and ATXyn10^M-encoding genes, ATxyn10 and ATxyn10 ^M, were expressed in Pichia pas toris GS115. The temperature optimum of recombinant (re) ATXyn10^M was 60 °C, 10 °C higher than that of reAuXyn10A. Its thermal inactivation half-life (t _1/2) at 55 °C was 10.4-fold longer than that of reAuXyn10A. As compared with reAuXyn10A, reATXyn10^M displayed a slight decrease in K _m value and a significant increase in V _max value from 6,267 to 8,870 U/mg.