Improved high thermal stability of pullulanase from a newly isolated thermophilic Bacillus sp. AN-7

A thermophilic Bacillus sp. strain AN-7, isolated from a soil in India, produced an extracellular pullulanase upon growth on starch–peptone medium. The enzyme was purified to homogeneity by ammonium sulfate precipitation, anion exchange and gel filtration chromatography. The optimum temperature and pH for activity was 90 °C and 6.0. With half-life time longer than one day at 80 °C the enzyme proves to be thermostable in the pH range 4.5–7.0. The pullulanase from Bacillus strain lost activity rapidly when incubated at temperature higher than 105 °C or at pH lower than 4.5. Pullulanase was completely inhibited by the Hg²⁺ ions. Ca²⁺, dithiothreitol, and Mn²⁺ stimulated the pullulanase activity. Kinetic experiments at 80 °C and pH 6.0 gave V_max and K_m values of 154 U mg⁻¹ and 1.3 mg ml⁻¹. The products of pullulan were maltotriose and maltose. This proved that the purified pullulanase (pullulan-6-glucanohydrolase, EC 3.2.1.41) from Bacillus sp. AN-7 is classified under pullulanase type I. To our knowledge, this Bacillus pullulanase is the most highly thermostable type I pullulanase known to date.     

Response surface methodology: Synthesis of short chain fructooligosaccharides with a fructosyltransferase from Aspergillus aculeatus

A transferase was isolated, purified and characterised from Aspergillus aculeatus. The enzyme exhibited a pH and temperature optima of 6.0 and 60 °C, respectively and under such conditions remained stable with no decrease in activity after 5 h. The enzyme was purified 7.1 fold with a yield of 22.3% and specific activity of 486.1 U mg^?1 after dialysis, concentration with polyethyleneglycol (30%) and DEAE-Sephacel chromatography. It was monomeric with a molecular mass of 85 kDa and K_m and V_max values of 272.3 mM and 166.7 μmol min^?1 ml^?1. The influence of pH, temperature, reaction time, and enzyme and sucrose concentration on the formation of short-chain fructooligosaccharides (FOS) was examined by statistical response surface methodology (RSM). The enzyme showed both transfructosylation and hydrolytic activity with the transfructosylation ratio increasing to 88% at a sucrose concentration of 600 mg ml^?1. Sucrose concentration (400 mg ml^?1) temperature (60 °C), and pH (5.6) favoured the synthesis of high levels of GF₃ and GF₄. Incubation time had a critical effect on the yield of FOS as the major products were GF₂ after 4 h and GF₄ after 8 h. A prolonged incubation of 16 h resulted in the conversion of GF₄ into GF₂ as a result of self hydrolase activity.     

Purification and characterization of a highly selective glycyrrhizin-hydrolyzing β-glucuronidase from Penicillium purpurogenum Li-3

A novel β-glucuronidase from filamentous fungus Penicillium purpurogenum Li-3 was purified to electrophoretic homogeneity by ultrafiltration, ammonium sulfate precipitation, DEAE-cellulose ion exchange chromatography, and Sephadex G-100 gel filtration with an 80.7-fold increase in specific activity. The purified β-glucuronidase is a dimeric protein with an apparent molecular mass of 69.72 kDa (m/z = 69,717), determined by MALDI/TOF-MS. The optimal temperature and pH of the purified enzyme are 40 °C and 6.0, respectively. The enzyme is stable within pH 5.0–8.0, and the temperature up to 45 °C. Mg²⁺ ions enhanced the activity of the enzyme, Ca²⁺ and Al³⁺ showed no effect, while Mn²⁺, Zn²⁺, Hg²⁺ and Cu²⁺ substantially inhibited the enzymatic activity. The K_m and V_max values of the purified enzyme for glycyrrhizin (GL) were evaluated as 0.33 mM and 59.0 mmol mg^?1 min^?1, respectively. The purified enzyme displayed a highly selective glycyrrhizin-hydrolyzing property and converted GL directly to glycyrrhetic acid mono-glucuronide (GAMG), without producing byproduct glycyrrhetic acid (GA). The results suggest that the purified enzyme may have potential applications in bio-pharmaceutical and biotechnological industry.     

Biochemical characterization of xylanase produced from Streptomyces sp. CS624 using an agro residue substrate

An extracellular and cellulase-free xylanase (EX624) was produced by Streptomyces sp. CS624 using an agricultural residue (wheat bran) as a growth substrate. EX624 was purified from culture supernatant using ammonium sulfate precipitation, ion exchange and gel filtration chromatography. The SDS-PAGE and the zymogram analysis of the purified xylanase indicated molecular mass of 40 kDa. Biochemical characterization of the purified EX624 revealed its highest activity at a temperature of 60 °C and pH 6.0. The xylanase was adequately stable in the pH range 4.5–10.0 and at temperatures ≤50 °C. EX624 displayed enhanced activity in the presence of several metal ions including Fe²⁺, Co²⁺ and Ca²⁺. HPLC results showed that EX624 was not only able to hydrolyze commercially available pure beechwood xylan to xylose, xylobiose and xylotriose, but also abundantly available lignocellulosic agricultural residues in nature such as wheat bran to xylooligosaccharides.     

Biochemical properties of a β-mannanase and a β-xylanase produced by Ceriporiopsis subvermispora during biopulping conditions

One mannanase and one of the three xylanases produced by Ceriporiopsis subvermispora grown on Pinus taeda wood chips were characterized. A combination of ion exchange chromatography and SDS-PAGE data revealed the existence of a high-molecular-weight mannanase of 150 kDa that was active against galactoglucomannan and xylan. Its activity was optimal at pH 4.5. The K_m value with galactoglucomannan as substrate was 0.50 mg ml^?1. One xylanase with molecular mass of 79 kDa was also purified and characterized. Its activity was optimal at 60 °C and pH 8.0. Its K_m value with birchwood xylan as substrate was 1.65 mg ml^?1. Both the mannanase and the 79 kDa xylanase displayed relatively high activity on carboxymethyl cellulose. The sensitivity of the xylanase and mannanase to various salts was evaluated. None of the tested salts inhibited the xylanase, but Mn⁺², Fe⁺³, and Cu⁺² were strong inhibitors for the mannanase.     

Study on a prolyl endopeptidase from the skeletal muscle of common carp (Cyprinus carpio)

A prolyl endopeptidase (PEP) was purified to homogeneity from the skeletal muscle of common carp using a procedure involving ammonium sulfate fractionation and column chromatography involving DEAE-Sephacel, Phenyl-Sepharose, DEAE-Sepharose Fast Flow, and hydroxyapatite. The molecular weight of the PEP was 82 kDa as determined by SDS-PAGE. Using Suc-Gly-Pro-MCA as a substrate, the optimal pH and temperature of the purified enzyme were pH 6.0 and 35 °C, respectively, and the K_m and k_cat were 8.33 μM and 1.71 S^?1, respectively. The activity of the PEP was inhibited by SUAM-14746, a specific inhibitor of prolyl endopeptidases, and was partially inhibited by the serine proteinase inhibitors PMSF and Pefabloc SC. According to peptide mass fingerprinting, 12 peptide fragments with a total of 134 amino acid residues were obtained, which were highly identical to prolyl endopeptidases from zebrafish (Danio rerio) and sponge (Amphimedon queenslandica), confirming the purified enzyme was a prolyl endopeptidase. Our present study for the first time reported the existence of a prolyl endopeptidase in fish muscle.     

Purification and characterization of a new laccase from Shiraia sp.SUPER-H168

A new laccase from Shiraia sp.SUPER-H168 was purified by ion exchange column chromatography and gel permeation chromatography and the apparent molecular mass of this enzyme was 70.78 kDa, as determined by MALDI/TOF-MS. The optimum pH value of the purified laccase was 4, 6, 5.5 and 3 with 2,6-dimethoxyphenol (DMP), syringaldazine, guaiacol and 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) as substrates, respectively. The optimum temperature of the purified laccase was 50 °C using DMP, syringaldazine and guaiacol as substrates, but 60 °C for ABTS. Inhibitors and metal ions of SDS, NaN₃, Ag⁺ and Fe³⁺ showed inhibition on enzyme activity of 10.22%, 7.86%, 8.13% and 67.50%, respectively. Fe²⁺ completely inhibited the purified laccase. The K_cat/K_m values of the purified laccase toward DMP, ABTS guaiacol and syringaldazine were 3.99 × 10⁶, 3.74 × 10⁷, 8.01 × 10⁴ and 2.35 × 10⁷ mol^?1 L S^?1, respectively. The N-terminal amino acid sequence of the purified laccase showed 36.4% similarity to Pleurotus ostrestus. Approximately 66% of the Acid Blue 129 (100 mg L^?1) was decolorized by 2.5 U of the purified laccase after a 120 min incubation at 50 °C. Acid Red 1 (20 mg L^?1) and Reactive Black 5 (50 mg L^?1) were decolorized by the purified laccase after the addition of Acid Blue 129 (100 mg L^?1).     

Production and characterization of a thermostable endo-type β-xylanase produced by a newly-isolated Streptomyces thermocarboxydus subspecies MW8 strain from Jeju Island

A xylanase-producing, Gram-positive, aerobic, and spore-forming bacterium was isolated from a soil sample collected from Jeju Island and was classified as a novel subspecies of Streptomyces thermocarboxydus on the basis of 16S rRNA gene sequence similarity, the results of DNA–DNA hybridization analysis, and phenotypic characteristics. The novel strain was named as S. thermocarboxydus subsp. MW8 (=KCTC29013 = DSM52054). This strain produced extracellular xylanase. Xylanase from the strain was purified to homogeneity and had an apparent molecular weight of 52 kDa. The NH₂-terminal sequence (Ala-Glu-Ile-Arg-Leu) was distinct from those of previously reported xylanases. The purified xylanase produced xylobiose as the end-product of birchwood xylan hydrolysis. The K_m and V_max values of the purified xylanase on birchwood xylan were 1.71 mg/ml and 357.14 U/mg, respectively. The optimum pH and temperature for the enzyme were found to be 7.0 and 50 °C, respectively, and the enzyme exhibited significant heat stability. In addition, the enzyme was active over broad pH ranges: 84% of the maximum activity at pH 5.0, 84–88% at pH 6.0, 88% at pH 8.0, and 75–81% (pH 9.0). These enzymatic properties may be very useful for use in bio-industrial applications.     

Characterization of a HAP–phytase from a thermophilic mould Sporotrichum thermophile

The phytase of Sporotrichum thermophile was purified to homogeneity using acetone precipitation followed by ion-exchange and gel-filtration column chromatography. The purified phytase is a homopentamer with a molecular mass of ～456 kDa and pI of 4.9. It is a glycoprotein with about 14% carbohydrate, and optimally active at pH 5.0 and 60 °C with a T_1/2 of 16 h at 60 °C and 1.5 h at 80 °C. The activation energy of the enzyme reaction is 48.6 KJ mol^?1 with a temperature quotient of 1.66, and it displayed broad substrate specificity. Mg²⁺ exhibited a slight stimulatory effect on the enzyme activity, while it was markedly inhibited by 2,3-butanedione suggesting a possible role of arginine in its catalysis. The chaotropic agents such as guanidinium hydrochloride, urea and potassium iodide strongly inhibited phytase activity. Inorganic phosphate inhibited enzyme activity beyond 3 mM. The maximum hydrolysis rate (V_max) and apparent Michaelis–Menten constant (K_m) for sodium phytate were 83 nmol mg^?1 s^?1 and 0.156 mM, respectively. The catalytic turnover number (K_cat) and catalytic efficiency (K_cat/K_m) of phytase were 37.8 s^?1 and 2.4 × 10⁵ M^?1 s^?1, respectively. Based on the N-terminal and MALDI–LC–MS/MS identified amino acid sequences of the peptides, the enzyme did not show a significant homology with the known phytases.     

Purification and characterization of an extracellular antifungal chitinase from Penicillium ochrochloron MTCC 517 and its application in protoplast formation

A highly chitinolytic strain Penicillium ochrochloron MTCC 517 was procured from MTCC, Chandigarh, India. Culture medium supplemented with 1% chitin was found to be suitable for maximum production of chitinase. Purification of extracellular chitinase was done from the culture medium by organic solvent precipitation and DEAE-cellulose column chromatography. The chitinase was purified 6.92-fold with 29.9% yield. Molecular mass of purified chitinase was found to be 64 kDa by SDS-PAGE. The chitinase showed optimum temperature 40 °C and pH 7.0. The enzyme activity was completely inhibited by Hg²⁺, Zn²⁺, K⁺ and NH₄⁺. The enzyme kinetic study of purified chitinase revealed the following characteristics, such as apparent K_m 1.3 mg ml^?1, V_max 5.523 × 10^?5 moles l^?1 min^?1 and K_cat 2.37 s^?1 and catalytic efficiency 1.82 s^?1 M^?1. The enzyme hydrolyzed colloidal chitin, glycol chitin, chitosan, glycol chitosan, N,N′-diacetylchitobiose, p-nitrophenyl N-acetyl-β-d-glucosaminide and 4-methylumbelliferyl N-acetyl-β-d-glucosaminide. The chitinase of P. ochrochloron MTCC 517 is an exoenzyme, which gives N-acetylglucosamine as the main hydrolyzate after hydrolysis of colloidal chitin. Protoplasts with high regeneration capacity were obtained from Aspergillus niger using chitinase from P. ochrochloron MTCC 517. Since it also showed antifungal activity, P. ochrochloron MTCC 517 seems to be a promising biocontrol agent.     

Characterization of a spore surface lipase from the biocontrol agent Metarhizium anisopliae

A Metarhizium anisopliae spore surface lipase (MASSL) strongly bound to the fungal spore surface has been purified by ion exchange chromatography on DEAE sepharose followed by ultrafiltration and hydrophobic interaction chromatography on phenyl sepharose. Electrophoretic analyses showed that the molecular weight of this lipase is ～66 kDa and pI is 5.6. Protein sequencing revealed that identified peptides in MASSL shared identity with several lipases or lipase-related sequences. The enzyme was able to hydrolyze triolein, the animal lipid cholesteryl stearate and all ρNP ester substrates tested with some preference for esters with a short acyl chain. The values of K_m and V_max for the substrates ρNP palmitate and ρNP laurate were respectively 0.474 mM and 1.093 mMol min^?1 mg^?1 and 0.712 mM and 5.696 mMol min^?1 mg^?1. The optimum temperature of the purified lipase was 30 °C and the enzyme was most stable within the most acid pH range (pH 3–6). Triton X-100 increased and SDS reduced enzyme lipolytic activity. MASSL activity was stimulated by Ca²⁺, Mg²⁺ and Co²⁺ and inhibited by Mn²⁺. The inhibitory effect on activity exerted by EDTA and EGTA was limited, while the lipase inhibitor Ebelactone B completely inhibited MASSL activity as well as PMSF. Methanol 0.5% apparently did not affect MASSL activity while β-mercaptoethanol activated the enzyme.     

A thermoalkaliphilic halotolerant esterase from Rhodococcus sp. LKE-028 (MTCC 5562): Enzyme purification and characterization

A newly isolated Rhodococcus sp. LKE-028 (MTCC 5562) from soil samples of Gangotri region of Uttarakhand Himalayan produced a thermostable esterase. The enzyme was purified to homogeneity with purification fold 62.8 and specific activity 861.2 U mg^?1 proteins along with 26.7% recovery. Molecular mass of the purified enzyme was 38 kDa and values of K_m and V_max were 525 nM and 1666.7 U mg^?1 proteins, respectively. The esterase was active over a broad range of temperature (40–100 °C) and pH (7.0–12.0). The esterase was most active at pH 11.0. The optimum temperature of enzyme activity was 70 °C and the enzyme was completely stable after 3 h pre-incubation at 60 °C. Metal ions like Ca²⁺, Mg²⁺ and Co²⁺ stimulated enzyme activities. Purified esterase remarkably retained its activity with 10 M NaCl. Enzyme activity was slightly increased in presence of non-polar detergents (Tween 20, Tween 80 and Triton X 100), and compatible with oxidizing agents (H₂O₂) and reducing agents (β-mercaptoethanol). Activities of the enzyme was stimulated in presence of organic solvents like DMSO, benzene, toluene, methanol, ethyl alcohol, acetone, isoamyl alcohol after 10 days long incubation. The enzyme retained over 75% activity in presence of proteinase K. Besides hyperthermostability and halotolerancy the novelty of this enzyme is its resistance against protease.     

Cell-associated acid β-xylosidase production by Penicillium sclerotiorum

In recent decades, β-xylosidases have been used in many processing industries. In this work, the study of xylosidase production by Penicillium sclerotiorum and its characterization are reported. Optimal production was obtained in medium supplemented with oat spelts xylan, pH 5.0, at 30 °C, under stationary condition for six days. The optimum activity temperature was 60 °C and unusual optimum pH 2.5. The enzyme was stable at 50 and 55 °C, with half-life of 240 and 232 min, respectively. High pH stability was verified from pH 2.0 to 4.0 and 7.5. The β-xylosidase was strongly inhibited by divalent cations, sensitive to denaturing agents SDS, EDTA and activated by thiol-containing reducing agents. The apparent V_max and K_m values was 0.48 μmol PNXP min^?1 mg^?1 protein and 0.75 mM, respectively. The enzyme was xylose tolerant with a K_i of 28.7. This enzyme presented interesting characteristics for biotechnological process such as animal feed, juice and wine industries.     

A novel thermostable cellulase free xylanase stable in broad range of pH from Streptomyces sp. CS428

A cellulase free thermostable xylanase from Streptomyces sp. CS428 was isolated from a Korean soil sample, purified by single-step chromatography, and biochemically characterized. The extracellular xylanase was purified 26 fold with a 55% yield by CM Trisacryl cation exchange chromatography. The molecular mass of the enzyme (Xyn428) was approximately 37 kDa. Xyn428 was found to be stable over a broad pH range (4 to ～13.6) and to 50 °C and have an optimum temperature of 80 °C. Xyn428 had K_m and V_max values of 102.3 ± 1.2 mg/mL and 3225.4 ± 15 mmol/min mg, respectively, when beechwood xylan was used as substrate. N-terminal sequence of Xyn428 was INRTDHNENSYLEIHNNEAR. CS428 was grown on different agro waste xylan and produced 4197.1 U/mL of xylanase activity in 36 h of cultivation in wheat bran without supplements. Xyn428 activity was inhibited by Tris salt at concentrations above 20 mM, and produced xylose and xylobiose as major products. It was found to degrade agro waste materials by small unit of enzyme (20 U/g) as shown by electron microscopy. As being simple in purification, thermo tolerant, pH stability in broad range and ability to produce xylooligosaccharides show that Xyn428 has potential applications in industries as a biobleaching agent and for xylooligosaccharides production.     

Purification and characterization of an exo-polygalacturonase produced by Penicillium viridicatum RFC3 in solid-state fermentation

The pectinolytic enzyme obtained from Penicillium viridicatum RFC by solid-state fermentation was purified to homogeneity by pretreatment with kaolin (40 mg mL⁻¹) and ultrafiltration, followed by chromatography on a Sephadex G50 column. The apparent molecular weight of the enzyme was 24 kDa. Maximal activity occurred at pH 6.0 and at 60 °C. The enzyme proved to be an exo-polygalacturonase, releasing galacturonic acid by hydrolysis of highly esterified pectin. The presence of 10 mM Ba²⁺ increased the enzyme activity by 96% and its thermal stability by 30%, besides increasing its stability at acid pH. The apparent K_m with apple pectin as substrate was 1.82 mg mL⁻¹ and the V_max was 81 μmol min⁻¹ mg⁻¹.     

Characterization,purification, and temperature/pressure stability of polyphenol oxidase extracted from plums (Prunus domestica)

In this study, polyphenol oxidase (PPO) was extracted from Prunus domestica and partially purified by ammonium sulfate precipitation, hydrophobic interaction chromatography, and ion exchange chromatography. The final purification step revealed a 32.81-fold purification, and the molecular mass was estimated to be 65 kDa by SDS-PAGE. The purified PPO showed enzymatic activity mainly toward five substrates, namely catechol, catechin, 4-methyl catechol, chlorogenic acid, and L-3,4-dihydroxyphenylalanine, whereas it showed no activity toward caffeic acid, ferulic acid, p-coumaric acid, p-cresol, and l-tyrosine. The optimum pH and temperature values were 6.0 and 25 °C, respectively. The enzyme showed high stability in the pH range of 5.0–7.0 and in the temperature range of 25–65 °C. The most effective inhibitors of this enzyme were found to be ascorbic acid and l-cysteine. The thermal inactivation followed a first-order kinetic model, with activation energy of E_a 150.46 ± 1.29 kJ/mol. PPO extracted from plum showed stability at high pressure, with enzyme activation at 500 MPa.     

Production of endoxylanase with enhanced thermostability by a novel polyextremophilic Bacillus halodurans TSEV1 and its applicability in waste paper deinking

The screening and selection of the culture variables followed by optimization using statistical approaches led to a 23-fold enhancement in thermo-alkali-stable xylanase production by the polyextremophilic Bacillus halodurans TSEV1. The optimization of crucial parameters involved in the extraction of xylanase from the bacterial bran led to a high enzyme recovery. The purified xylanase produced in submerged fermentation (SmF) and solid state fermentation (SSF) was visualized as a single band on SDS-PAGE with a molecular mass of 40 kDa. The SSF-xylanase is optimally active at 78 °C and pH 9.0 and stable in the pH range between 7.0 and 12.0 with a T_1/2 of 65 min at 90 °C, which is higher than that of SmF-xylanase. The higher activation energy, enthalpy of deactivation (ΔH*), free energy change of deactivation (ΔG*) and T_1/2 of SSF-xylanase than these of SmF xylanase further confirmed higher thermostability of the former than the latter. The combination of commercial cellulase and TSEV1 xylanase was highly effective in deinking of waste paper at alkaline pH and elevated temperatures.     

Purification and characterization of an azoreductase from Escherichia coli CD-2 possessing quinone reductase activity

An oxygen-insensitive intracellular enzyme that is responsible for the decolorization of azo dyes was purified from Escherichia coli CD-2. The molecular weight of the purified enzyme was estimated as 27,000 ± 500 Da. Protein identification indicated that the enzyme had high sequence homology with E. coli K12 quinone reductase, and the enzyme was proved to have both azoreductase and quinone reductase activity. With methyl red as substrate, the optimal pH value and temperature were 6.5 and 37 °C, respectively. The enzyme was stable under different physiochemical conditions. The azoreductase activity was restrained by SDS and was almost completely inhibited by Co²⁺ and Hg²⁺. K_m and V_max values were 0.18 mM and 8.12 U mg^?1 of protein for NADH and 0.05 mM and 6.46 U mg^?1 of protein for methyl red, respectively. The purified enzyme could efficiently decolorize methyl red with both NADH and NADPH as electron donors.     

Purification and physicochemical properties of polygalacturonase from Aspergillus niger MTCC 3323

Polygalacturonases are the pectinolytic enzymes that catalyze the hydrolytic cleavage of the polygalacturonic acid chain. In the present study, polygalacturonase from Aspergillus niger (MTCC 3323) was purified. The enzyme precipitated with 60% ethanol resulted in 1.68-fold purification. The enzyme was purified to 6.52-fold by Sephacryl S-200 gel-filtration chromatography. On SDS–PAGE analysis, enzyme was found to be a heterodimer of 34 and 69 kDa subunit. Homogeneity of the enzyme was checked by NATIVE-PAGE and its molecular weight was found to be 106 kDa. The purified enzyme showed maximum activity in the presence of polygalacturonic acid at temperature of 45 °C, pH of 4.8, reaction time of 15 min. The enzyme was stable within the pH range of 4.0–5.5 for 1 h. At 4 °C it retained 50% activity after 108 h but at room temperature it lost its 50% activity after 3 h. The addition of Mn²⁺, K⁺, Zn²⁺, Ca²⁺ and Al³⁺ inhibited the enzyme activity; it increased in the presence of Mg²⁺ and Cu²⁺ ions. Enzyme activity was increased on increasing the substrate concentration from 0.1% to 0.5%. The K_m and V_max values of the enzyme were found to be 0.083 mg/ml and 18.21 μmol/ml/min. The enzyme was used for guava juice extraction and clarification. The recovery of juice of enzymatically treated pulp increased from 6% to 23%. Addition of purified enzyme increased the %T₆₅₀ from 2.5 to 20.4 and °Brix from 1.9 to 4.8. The pH of the enzyme treated juice decreased from 4.5 to 3.02.     

Cloning,expression, and characterization of a thermostable β-xylosidase from thermoacidophilic Alicyclobacillus sp. A4

A β-xylosidase gene (xylA4) was identified in the genome sequence of thermoacidophilic Alicyclobacillus sp. A4. The deduced amino acid sequence was highly homologous with the β-xylosidases of family 52 of the glycoside hydrolases (GH). The full-length gene consisted of 2097 bp and encoded 698 amino acids without a signal peptide. The gene product was successfully expressed in Escherichia coli with an activity of 564.9 U/mL. Recombinant XylA4 was purified by Ni²⁺-NTA affinity chromatography with a molecular mass of 78.5 kDa. The enzyme showed optimal activity at pH 6.0 and 65 °C, and remained stable over the pH range of 5.0–9.0. The thermostability of XylA4 is noteworthy, retaining almost all of the activity after 1 h incubation at 65 °C. Using p-nitrophenyl-β-d-xylopyranoside (pNPX) as the substrate, XylA4 had the highest specific activity (261.1 U/mg) and catalytic efficiency (601.5/mM/s) known so far for GH52 xylosidases. The enzyme displayed high tolerance to xylose, with a K_i value of approximately 88.7 mM. It also had synergy with xylanase XynBE18 from Paenibacillus sp. E18 in xylan degradation, releasing more xylose (up to 1.43 folds) than XynBE18 alone. Therefore, this thermostable xylose-tolerant β-xylosidase may have a great application potential in many industrial fields.