An Epichlorohydrin-Crosslinked Semi-Interpenetrating GG-PEO Network as a Xerogel Matrix for Sustained Release of Sulpiride

The current study involved the development of a novel sustained release crosslinked semi-IPN xerogel matrix tablet prepared by chemical crosslinking of poly(ethylene) oxide (PEO) and gellan gum (GG) employing epichlorohydrin (EPI) as crosslinker. A Box–Behnken design was employed for the statistical optimization of the matrix system to ascertain the ideal combination of native polymeric and crosslinking agents. Characterization studies were performed by employing standard polymer characterization techniques such as Fourier transform infrared spectrometry, differential scanning calorimetry, and scanning electron microscopy. Formulated matrix tablets displayed zero-order release kinetics, extending over 24 h. The mechanism of drug release was primarily by swelling and surface erosion. Crosslinked semi-IPN xerogel matrix tablets were compared to non-crosslinked polymer blends; results from the study conducted showed that the physiochemical properties of the PEO and GG were sufficiently modified to allow for sustained release of sulpiride with a 100% drug release at 24 h in a controlled manner as compared to non-crosslinked formulations which displayed further release beyond the test period. Crosslinked formulations displayed water uptake between 450 and 500% indicating a controlled rate of swelling and erosion allowing for sustained release. Surface morphology of the crosslinked system depicted a porous structure formed by interpenetrating networks of polymers, allowing for a greater degree of controlled penetration into the system affording it the ability to sustain drug release. Therefore, conclusively, based on the study performed, crosslinked PEO-GG allows for the sustained release of sulpiride from a hydrophilic semi-IPN xerogel matrix system.KEY WORDS: epichlorohydrin, matrix tablet, semi-interpenetrating polymer network, sustained release, sulpiride     

Different roles of the IGF-I Ec peptide (MGF) and mature IGF-I in myoblast proliferation and differentiation

The identification of relevant protein kinase–protein substrate partners remains a serious challenge on a genome-wide scale. The design and synthesis of a photo-activatable nucleotide reagent to crosslink protein kinases with their substrates is described in which an azido group is appended to the γ-phosphoryl and purine moieties of ATP. In the absence of UV, compounds of this class were shown to act as competitive inhibitors versus ATP and non-competitive inhibitors versus peptide substrate for the protein tyrosine kinase Csk, suggesting that they can form a ternary complex with kinase and protein substrate. In vitro experiments with protein kinases indicate the bifunctional reagent can induce covalent protein–protein crosslinking that is dependent on UV irradiation. That significant kinase–substrate crosslinking occurs is suggested by the fact that this crosslinking is competitively inhibited by ATP. The crosslinked adducts can be readily cleaved by phosphodiesterase which supports the model for crosslinking and provides a simple method to deconvolute the linked protein partners.     

The role of hydrogel structure and dynamic loading on chondrocyte gene expression and matrix formation

Crosslinked poly(ethylene glycol) (PEG) hydrogels are attractive scaffolds for cartilage tissue engineering because of their ability to mimic the aqueous environment and mechanical properties of native cartilage. In this study, hydrogel crosslinking density was varied to study the influence of gel structure and the application of dynamic loading (continuous, 1 Hz, 15% amplitude strain) on chondrocyte gene expression over 1 week culture. Gene expression was quantified using real-time RT-PCR for collagen II and aggrecan, the major cartilage extracellular matrix (ECM) components, and collagen I, an indicator of chondrocyte de-differentiation. When chondrocytes were encapsulated in PEG gels with low or high crosslinking, a high collagen II expression compared to collagen I expression (1000 or 100,000:1, respectively) indicated the native chondrocyte phenotype was retained. In the absence of loading, relative gene expression for collagen II and aggrecan was significantly higher (e.g., 2-fold and 4-fold, respectively, day 7) in the low crosslinked gels compared to gels with higher crosslinking. Dynamic loading, however, showed little effect on ECM gene expression in both crosslinked systems. To better understand the cellular environment, ECM production was qualitatively assessed using an in situ immunofluorescent technique and standard histology. A pericellular matrix (PCM) was observed as early as day 3 post-encapsulation and the degree of formation was dependent on gel crosslinking. These results suggest the PCM may protect the cells from sensing the applied loads. This study demonstrates that gel structure has a profound effect on chondrocyte gene expression, while dynamic loading has much less of an effect at early culture times.     

Stabilization of type I collagen using dialdehyde cellulose

Type I collagen from rat tail tendon (RTT) fibres was crosslinked with dialdehyde cellulose to bring about stabilization of the matrix. Dialdehyde cellulose (DAC) was prepared by periodate oxidation of hydrolyzed cellulose. Autoclaving of DAC resulted in hydrolysis and lower molecular weight oligomeric species. The formation of the crosslinked network between DAC and the collagen fibres has brought about significant thermal and enzymatic stability to collagen. DAC crosslinked collagen fibres exhibited an increase in hydrothermal stability by 20 °C with autoclaved DAC at pH 8. The collagen matrix resulted in an increase in denaturation peak temperature (T_D) and an increase in phase change of activation energy (E_a) and enthalpy change (ΔH) for the shinking process indicating intermolecular crosslinking arising from covalent interactions. Thermal stability and crosslinking efficiency was found to increase with pH and concentration of DAC. DAC treated collagen exhibited 93% resistance to collagenolytic hydrolysis.     

Removal of As(V) from water by pectin based active hydrogels following geochemical approach

Fe(II)-loaded pectin based hydrogels were used to remove As(V) from water. The hydrogels were synthesized by crosslinking pectin 'as such' or in the presence of 2-acrylamido-2-methylpropanesulphonic acid and three crosslinkers. The hydrogels crosslinked with 5% glutaraldehyde showed the maximum uptake of both Fe(II) and As(V). The sorption of As(V) was found to be sensitive to pH and temperature changes, as the maximum sorption was observed at 35 degrees C and 7.0-9.2 pH.     

Evaluation of Fibroblasts Adhesion and Proliferation on Alginate-Gelatin Crosslinked Hydrogel

Due to the relatively poor cell-material interaction of alginate hydrogel, alginate-gelatin crosslinked (ADA-GEL) hydrogel was synthesized through covalent crosslinking of alginate di-aldehyde (ADA) with gelatin that supported cell attachment, spreading and proliferation. This study highlights the evaluation of the physico-chemical properties of synthesized ADA-GEL hydrogels of different compositions compared to alginate in the form of films. Moreover, in vitro cell-material interaction on ADA-GEL hydrogels of different compositions compared to alginate was investigated by using normal human dermal fibroblasts. Viability, attachment, spreading and proliferation of fibroblasts were significantly increased on ADA-GEL hydrogels compared to alginate. Moreover, in vitro cytocompatibility of ADA-GEL hydrogels was found to be increased with increasing gelatin content. These findings indicate that ADA-GEL hydrogel is a promising material for the biomedical applications in tissue-engineering and regeneration.     

MMP-Sensitive PEG Diacrylate Hydrogels with Spatial Variations in Matrix Properties Stimulate Directional Vascular Sprout Formation

The spatial presentation of immobilized extracellular matrix (ECM) cues and matrix mechanical properties play an important role in directed and guided cell behavior and neovascularization. The goal of this work was to explore whether gradients of elastic modulus, immobilized matrix metalloproteinase (MMP)-sensitivity, and YRGDS cell adhesion ligands are capable of directing 3D vascular sprout formation in tissue engineered scaffolds. PEGDA hydrogels were engineered with mechanical and biofunctional gradients using perfusion-based frontal photopolymerization (PBFP). Bulk photopolymerized hydrogels with uniform mechanical properties, degradation, and immobilized biofunctionality served as controls. Gradient hydrogels exhibited an 80.4% decrease in elastic modulus and a 56.2% decrease in immobilized YRGDS. PBFP hydrogels also demonstrated gradients in hydrogel degradation with degradation times ranging from 10–12 hours in the more crosslinked regions to 4–6 hours in less crosslinked regions. An in vitro model of neovascularization, composed of co-culture aggregates of endothelial and smooth muscle cells, was used to evaluate the effect of these gradients on vascular sprout formation. Aggregate invasion in gradient hydrogels occurred bi-directionally with sprout alignment observed in the direction parallel to the gradient while control hydrogels with homogeneous properties resulted in uniform invasion. In PBFP gradient hydrogels, aggregate sprout length was found to be twice as long in the direction parallel to the gradient as compared to the perpendicular direction after three weeks in culture. This directionality was found to be more prominent in gradient regions of increased stiffness, crosslinked MMP-sensitive peptide presentation, and immobilized YRGDS concentration.     

Radiation crosslinked psyllium and polyacrylic acid based hydrogels for use in colon specific drug delivery

In order to utilize the psyllium husk, a medicinally important natural polysaccharide, to develop the hydrogels meant for the drug delivery, we have prepared psyllium and polyacrylic acid based polymeric networks by radiation-induced crosslinked copolymerization. Polymeric networks (hydrogels) thus formed were characterized with SEMs, FTIR and swelling studies. Swelling behavior of the hydrogels was studied as a function of monomer concentration in the hydrogels and temperature, pH and [NaCl] of the swelling medium. This paper discusses the swelling kinetics of the hydrogels and release dynamics of anticancer model drug 5-fluorouracil from the hydrogels for the evaluation of swelling and drug release mechanisms. It has been observed from the release dynamics of drug that diffusion exponent ‘n’ have 0.7, 0.8 and 0.7 values and gel characteristics constant ‘k’ have 9.13 × 10⁻³, 6.22 × 10⁻³ and 9.01 × 10⁻³ values for the release of 5-fluorouracil, respectively, in distilled water, pH 2.2 buffer and pH 7.4 buffer. The values of the diffusion exponent show that the release of drug from drug-loaded hydrogels has occurred through Non-Fickian diffusion mechanism. It has also been observed from the swelling and release of drug in the different pH buffer that the polymer matrix is pH responsive and can be exploited for the delivery of anticancer drug to the colon.     

Signal enhancement in polysaccharide based sensors for infections by incorporation of chemically modified laccase

Bioresponsive polymers (BRPs) allow the detection of potentially pathogenic microorganisms. Here, peptidoglycan and cellulose based hydrogels were constructed with potential for diagnosis of wound infection or, for example, Aspergillosis, respectively. These systems respond to extracellular enzymes from microbes or enzymes secreted from the human immune system in case of infection. Laccases as 'enhanzymes' were incorporated into these devices for signal and stability enhancement when compared to simple dye release based systems. To retain the enhanzymes within the BRPs, they were either PEGylated laccase (Laccase_PEG) to increase size or methacrylated laccase (Laccase_MA) to allow covalent attachment to the polysaccharide matrices. PEGylation of Trametes hirsuta laccase led to a fivefold increase in size to 270kDa according to size exclusion chromatography (SEC). Likewise, successful methacrylation of the laccase was demonstrated by using reversed phase chromatography while SEC analysis proved covalent attachment of the enzyme to the methacrylated polysaccharide matrix. Upon incubation of peptidoglycan based BRPs with fluid from infected wounds, the difference to controls was four times higher for Laccase_PEG based signalling when compared to simple dye release. Similarly, the control signals (i.e. leaching) were considerably reduced in case of Laccase_MA incorporated in crosslinked peptidoglycan (PG) and carboxymethylcellulose (CMC) hydrogels for signalling. In addition, Laccase_MA catalysed colour formation enhanced the signal dramatically with factors between 100- and 600-fold. Laccase_MA was demonstrated to oxidise silica gel immobilised ferulic acid incorporated into the BRP with clearly visible colour changes of 4.5 ΔE units according the CIELab concept upon incubation by trigger enzymes as well as infected wound fluids.     

Rheology and nanostructure of hydrophobically modified alginate (HMA) gels and solutions

The effect of hydrophobic modification on the mechanical and structural characteristics of hydrophobically modified alginate (HMA) solutions and hydrogels were evaluated. The HMA systems consisted of alkyl chains, C₈, grafted onto alginate backbones. With an increase in degree of substitution of hydrophobic tails, the association became stronger in solution, but same was not true for gels. The contribution of ionic crosslinking was found to be the dominant factor in determining the mechanical strength of hydrogels. Rheological measurements of 2 wt% HMA gels reveal formation of a strongly crosslinked network with an elastic modulus close to 100 kPa. Small-angle X-ray scattering (SAXS) experiments indicate that HMA assembles into a disordered structure with regions rich in the hydrophobic domain surrounded by a crosslinked hydrophilic network.     

Study of Burn‐In Loss in Green Solvent‐Processed Ternary Blended Organic Photovoltaics Derived from UV‐Crosslinkable Semiconducting Polymers and Nonfullerene Acceptors

This work deals with the investigation of burn‐in loss in ternary blended organic photovoltaics (OPVs) prepared from a UV‐crosslinkable semiconducting polymer (P2FBTT‐Br) and a nonfullerene acceptor (IEICO‐4F) via a green solvent process. The synthesized P2FBTT‐Br can be crosslinked by UV irradiation for 150 s and dissolved in 2‐methylanisole due to its asymmetric structure. In OPV performance and burn‐in loss tests performed at 75 °C or AM 1.5G Sun illumination for 90 h, UV‐crosslinked devices with PC₇₁BM show 9.2% power conversion efficiency (PCE) and better stability against burn‐in loss than pristine devices. The frozen morphology resulting from the crosslinking prevents lateral crystallization and aggregation related to morphological degradation. When IEICO‐4F is introduced in place of a fullerene‐based acceptor, the burn‐in loss due to thermal aging and light soaking is dramatically suppressed because of the frozen morphology and high miscibility of the nonfullerene acceptor (18.7% → 90.8% after 90 h at 75 °C and 37.9% → 77.5% after 90 h at AM 1.5G). The resulting crosslinked device shows 9.4% PCE (9.8% in chlorobenzene), which is the highest value reported to date for crosslinked active materials, in the first green processing approach.     

Smart hydrogels based on semi-interpenetrating polymeric networks of collagen-polyurethane-alginate for soft/hard tissue healing,drug delivery devices,and anticancer therapies

In this work, hydrogels based on semi-interpenetrating polymeric networks (semi-IPN) based on collagen-polyurethane-alginate were studied physicochemically and from different approaches for biomedical application. It was determined that the matrices in the hydrogel state are crosslinked by the formation of urea and amide bonds between the biopolymer chains and the polyurethane crosslinker. The increment in alginate content (0–40 wt%) significantly increases the swelling capacity, generating semi-crystalline granular structures with improved storage modulus and resistance to thermal, hydrolytic, and proteolytic degradation. The in vitro bioactivity results indicated that the composition of these novel hydrogels stimulates the metabolic activity of monocytes and fibroblasts, benefiting their proliferation; while in cancer cell lines, it was determined that the composition of these biomaterials decreases the metabolic activity of breast cancer cells after 48 h of stimulation, and for colon cancer cells their metabolic activity decreases after 72 h of contact for the hydrogel with 40 wt% alginate. The matrices show a behavior of multidose release of ketorolac, and a higher concentration of analgesic is released in the semi-IPN matrix. The inhibition capacity of Escherichia coli is higher if the polysaccharide concentration is low (10 wt%). The in vitro wound closure test (scratch test) results indicate that the hydrogel with 20 wt% alginate shows an improvement in wound closure at 15 days of contact. Finally, the bioactivity of mineralization was evaluated to demonstrate that these hydrogels can induce the formation of carbonated apatite on their surface. The engineered hydrogels show biomedical multifunctionality and they could be applied in soft and hard tissue healing strategies, anticancer therapies, and drug release devices.     

Synthesis and characterization of pH-sensitive hydrogel composed of carboxymethyl chitosan for colon targeted delivery of ornidazole

In the present study, carboxymethyl chitosan was prepared from chitosan, crosslinked with glutaraldehyde and evaluated in vitro as a potential carrier for colon targeted drug delivery of ornidazole. Ornidazole was incorporated at the time of crosslinking of carboxymethyl chitosan. The chitosan was evaluated for its degree of deacetylation (DD) and average molecular weight; which were found to be 84.6% and 3.5×10(4) Da, respectively. The degree of substitution on prepared carboxymethyl chitosan was found to be 0.68. All hydrogel formulations showed more than 85% and 74% yield and drug loading, respectively. The swelling behaviour of prepared hydrogels checked in different pH values, 1.2, 6.8 and 7.4, indicated pH responsive swelling characteristic with very less swelling at pH 1.2 and quick swelling at pH 6.8 followed by linear swelling at pH 7.4 with slight increase. In vitro release profile was carried out at the same conditions as in swelling and drug release was found to be dependant on swelling of hydrogels and showed biphasic release pattern with non-fickian diffusion kinetics at higher pH. The carboxymethylation of chitosan, entrapment of drug and its interaction in prepared hydrogels were checked by FTIR, (1)H NMR, DSC and p-XRD studies, which confirmed formation of carboxymethyl chitosan from chitosan and absence of any significant chemical change in ornidazole after being entrapped in crosslinked hydrogel formulations. The surface morphology of formulation S6 checked before and after dissolution, revealed open channel like pores formation after dissolution.     

Maintenance of stem cell viability and differentiation potential following cryopreservation within 3-dimensional hyaluronic acid hydrogels

While significant progress has been made in directing the behavior of cells encapsulated within three-dimensional (3D) covalently crosslinked hydrogels, the capacity of these materials to support in situ cryopreservation of cells directly within the gels has not been assessed. Here, we demonstrate the retention of human mesenchymal stem cell (hMSC) viability within hyaluronic acid (HA) and polyethylene glycol based hydrogels via a facile gradual cooling and freezing protocol. Encapsulated cell viability was retained at similar rates in both materials systems regardless of initial duration in culture or adhesive ligand incorporation, indicating the versatility of the approach. Additionally, the cryopreservation protocol maintains stem cell differentiation potential; incubation in adipogenic differentiation media induced equal rates of hMSC adipogenesis in freeze-thawed and non-frozen HA based hydrogels on a per-cell basis. Collectively, these findings highlight the cryopreservation protocol as a platform technology that, in addition to contributing to an increased understanding of three-dimensional cell-matrix interactions, could enable the long-term preservation of tissue engineering constructs for clinical applications.     

Characterization and in vitro evaluation of starch based hydrogels as carriers for colon specific drug delivery systems

A series of starch/methacrylic acid (MAAc) copolymer hydrogels of different compositions were synthesized using γ-rays induced polymerization and crosslinking. The effects of the preparation conditions such as the feed solution concentration, feed solution composition and irradiation dose on the gelation process of the synthesized copolymer were investigated. The swelling behavior of the starch/methacrylic acid (MAAc) copolymer hydrogels was characterized by studying the effect of the hydrogel composition on the time- and pH-dependent swelling. Swelling kinetics showed that the synthesized hydrogels possessed Fickian diffusion behavior at pH 1 and non-Fickian diffusion at pH 7 which recommend them as good candidate for colon specific drug delivery systems. The synthesized hydrogels were loaded with ketoprofen as a model drug to investigate the release behavior of the synthesized hydrogels. The results showed the ability of the hydrogels to keep the loaded drug at pH 1 and release it at pH 7. The data also showed that the release rate can be controlled by controlling the preparation conditions such as comonomer concentration and composition and irradiation dose.     

Alginate Microspheres Containing Temperature Sensitive Liposomes (TSL) for MR-Guided Embolization and Triggered Release of Doxorubicin

Objective

The objective of this study was to develop and characterize alginate microspheres suitable for embolization with on-demand triggered doxorubicin (DOX) release and whereby the microspheres as well as the drug releasing process can be visualized in vivo using MRI.

Methods and Findings

For this purpose, barium crosslinked alginate microspheres were loaded with temperature sensitive liposomes (TSL/TSL-Ba-ms), which release their payload upon mild hyperthermia. These TSL contained DOX and [Gd(HPDO3A)(H₂O)], a T₁ MRI contrast agent, for real time visualization of the release. Empty alginate microspheres crosslinked with holmium ions (T₂* MRI contrast agent, Ho-ms) were mixed with TSL-Ba-ms to allow microsphere visualization. TSL-Ba-ms and Ho-ms were prepared with a homemade spray device and sized by sieving. Encapsulation of TSL in barium crosslinked microspheres changed the triggered release properties only slightly: 95% of the loaded DOX was released from free TSL vs. 86% release for TSL-Ba-ms within 30 seconds in 50% FBS at 42°C. TSL-Ba-ms (76 ± 41 μm) and Ho-ms (64 ± 29 μm) had a comparable size, which most likely will result in a similar in vivo tissue distribution after an i.v. co-injection and therefore Ho-ms can be used as tracer for the TSL-Ba-ms. MR imaging of a TSL-Ba-ms and Ho-ms mixture (ratio 95:5) before and after hyperthermia allowed in vitro and in vivo visualization of microsphere deposition (T₂*-weighted images) as well as temperature-triggered release (T₁-weighted images). The [Gd(HPDO3A)(H₂O)] release and clusters of microspheres containing holmium ions were visualized in a VX₂ tumor model in a rabbit using MRI.

Conclusions

In conclusion, these TSL-Ba-ms and Ho-ms are promising systems for real-time, MR-guided embolization and triggered release of drugs in vivo.     

Synthesis and characterization of thermo-sensitive semi-IPN hydrogels based on poly(ethylene glycol)-co-poly(ε-caprolactone) macromer, N-isopropylacrylamide, and sodium alginate

Thermo-sensitive semi-IPN hydrogels were prepared via in situ copolymerization of N-isopropylacrylamide (NIPAAm) with poly(ethylene glycol)-co-poly(ε-caprolactone) (PEG-co-PCL) macromer in the presence of sodium alginate by UV irradiation technology. The effects of the sodium alginate content, temperature, and salt on the swelling behavior of the as-obtained hydrogels were studied. The results showed that the swelling ratio of the hydrogels increased with the increasing sodium alginate content at the same temperature, and decreased with the increase in temperature. The salt sensitivity of the semi-IPN hydrogels was dependent on the content of sodium alginate introduced in the hydrogels. The mechanical rheology of the hydrogels and in vitro release behavior of bovine serum albumin (BSA) in situ encapsulated within the hydrogels were also investigated. It was found that the introduction of sodium alginate with semi-IPN structure improved mechanical strength of the hydrogels and the cumulative release percentage of BSA from the hydrogels. Such double-sensitive semi-IPN hydrogel materials could be exploited as potential candidates for drug delivery carriers.     

A comparison of human mesenchymal stem cell osteogenesis in poly(ethylene glycol) hydrogels as a function of MMP-sensitive crosslinker and crosslink density in chemically defined medium

This study investigated osteogenesis of human mesenchymal stem cells encapsulated in matrix-metalloproteinase (MMP)-sensitive poly(ethylene glycol) (PEG) hydrogels in chemically defined medium (10 ng/ml bone morphogenic factor-2). Thiol-norbornene photoclick hydrogels were formed with CRGDS and crosslinkers of PEG dithiol (nondegradable), CVPLS-LYSGC (P1) or CRGRIGF-LRTDC (P2; dash indicates cleavage site) at two crosslink densities. Exogenous MMP-2 degraded P1 and P2 hydrogels similarly. MMP-14 degraded P1 hydrogels more rapidly than P2 hydrogels. Cell spreading was greatest in P1 low crosslinked hydrogels and to a lesser degree in P2 low crosslinked hydrogels, but not evident in nondegradable and high crosslinked MMP-sensitive hydrogels. Early osteogenesis (Alkaline phosphatase [ALP] activity) was accelerated in hydrogels that facilitated cell spreading. Contrarily, late osteogenesis (mineralization) was independent of cell spreading. Mineralized matrix was present in P1 hydrogels, but only present in P2 high crosslinked hydrogels and not yet present in nondegradable hydrogels. Overall, the low crosslinked P1 hydrogels exhibited an accelerated early and late osteogenesis with the highest ALP activity (Day 7), greatest calcium content (Day 14), and greatest collagen content (Day 28), concomitant with increased compressive modulus over time. Collectively, this study demonstrates that in chemically defined medium, hydrogel degradability is critical to accelerating early osteogenesis, but other factors are important in late osteogenesis.     

Balanced electrostatic blending approach--an alternative to chemical crosslinking of Thai silk fibroin/gelatin scaffold

In tissue engineering, chemical crosslinking is widely used for conjugating two or more biomaterials to mainly control biodegradability and strength. For example, Thai silk fibroin/gelatin scaffold will offer mechanical strength from Thai silk fibroin and cell attraction from gelatin. However, chemical crosslinking requires crosslinking agent which could potentially pose negative impact from remaining trace amount of chemicals especially in medical application. Here we present an alternative approach to chemical crosslinking—a balance electrostatic blending approach. In this approach, two opposite charge biomaterials were selected for blending, with different ratios. Both materials were bound together with electrostatic force. The maximum binding was achieved when mixture electric potential approaches zero. In this work, we compared this approach with traditionally chemical crosslinking in terms of physical appearance, binding effectiveness, mechanical strength (in dry/wet conditions), in vitro biodegradation, and cell proliferation. We found that 50/50 weight ratio of Thai silk fibroin/gelatin scaffold had almost comparable properties to chemical crosslinked scaffold. It has similar appearance, binding effectiveness, and affinity for cell proliferation. For mechanical properties, even this approach yields lower dry compressive modulus compared with chemical crosslinking. But in wet condition, the compressive modulus from both methods is similar. However, the biodegradation time of non-crosslinked scaffolds is slightly faster than that of chemical crosslinked ones. These results demonstrate that a balance electrostatic approach is an alternative approach to chemical crosslinking when there is a concern of remaining trace amount of crosslinking agent in medical application.