Laccase mediator system for activation of agarose gel: Application for immobilization of proteins

Cross-linked Sepharose beads were treated with laccase–TEMPO system for oxidation of the primary alcohol groups on the sugar moieties. Optimal activation conditions using Trametes versicolor laccase were at pH 5 and 22 °C, giving an aldehyde content of 55 μmol g⁻¹ Sepharose with 28 units g⁻¹ of laccase and 12.5 mM TEMPO. The activated Sepharose was used for immobilization of trypsin as model protein. Highest degree of immobilization was obtained at pH 10.5 but the activity yield was only 31% of that loaded on the gel. The yield of gel bound trypsin activity was increased to 76% (corresponding to about 43 U g⁻¹ Sepharose) when the immobilization was performed in the presence of trypsin inhibitor, benzamidine. The immobilization yields were comparable to that obtained on the matrix activated using sodium periodate (containing 72 μmol aldehyde per g Sepharose). Recycling and storage of the immobilized trypsin preparations showed high stability of the enzyme bound to laccase–TEMPO activated gel.     

Immobilization of fungal (Trametes versicolor) laccase onto Amberlite IR-120 H beads: Optimization and characterization

Laccase from Trametes versicolor was immobilized on Amberlite IR-120 H beads. Maximum immobilization obtained was 78.7% at pH = 4.5 and temperature T = 45 °C. Kinetic parameters, K_m and V_max values, were determined respectively as 0.051 mM and 2.77 × 10^?2 mM/s for free and 4.70 mM and 5.27 × 10^?3 mM/s for immobilized laccase. The Amberlite–laccase system showed a 30% residual activity after 7 cycles. On the other hand, the loss of activity for free laccase after 7 days of storage at 4 °C was 18.5% in comparison to Amberlite–laccase system with a loss of 1.4%, during the same period. Improved operational, thermal and storage stabilities of the immobilized laccase were obtained compared to the free counterpart. Therefore, the use of low-cost matrices, like Amberlite for enzyme immobilization represents a promising product for enzymatic industrial applications.     

Laccase immobilization on enzymatically functionalized polyamide 6,6 fibres

Polyamide matrices, such as membranes, gels and non-wovens, have been applied as supports for enzyme immobilization, although in literature the enzyme immobilization on woven nylon matrices is rarely reported. In this work, a protocol for a Trametes hirsuta laccase immobilization using woven polyamide 6,6 (nylon) was developed. A 2⁴ full factorial design was used to study the influence of pH, spacer (1,6-hexanediamine), enzyme and crosslinker concentration on the efficiency of immobilization. The factors enzyme dosage and spacer seem to have played a critical role in the immobilization of laccase onto nylon support. Under optimized working conditions (29 U mL⁻¹ of laccase, 10% of glutaraldehyde, pH = 5.5, with the presence of the spacer), the half-life time attained was about 78 h (18% higher than that of free enzyme), the protein retention was 30% and the immobilization yield was 2%. The immobilized laccase has potential for application in the continuous decolourization of textile effluents, where it can be applied into a membrane reactor.     

Covalent immobilization of hydroperoxide lyase on chitosan hybrid hydrogels and production of C6 aldehydes by immobilized enzyme

Five kinds of spacer arm attached chitosan hybrid hydrogels were tested for the possibility of being used as carriers for the immobilization of hydroperoxide lyase from amaranthus tricolor leaves. The 1,6-hexamethylenediamine attached chitosan-κ-carrageenan with biomimetic hydrophobic surface was proved to be the most suitable carrier. A maximum activity of 7.49 ± 0.19 U/g and a yield of 95% were obtained under optimized coupling condition. Meanwhile, the affinity between enzyme and substrates was not reduced after immobilization, as evidenced by the fact that the K_m value of hydroperoxide lyase decreased from 108.6 to 79.97 μM for 13-hydroperoxy-linoleic-acid and almost unchanged for 13-hydroperoxy-linolenic-acid. Furthermore, the thermal, operational and storage stabilities of HPL were significantly improved after immobilization. Using the immobilized enzyme as the catalyst, the yield of 2(E)-hexenal and hexanal reached 1374.8 ± 51.8 mg/L and 1987.9 ± 67.9 mg/L, respectively, and the amount of immobilized enzyme needed in the reaction mixture was much lower than its free counterpart.     

Isolation and partial characterization of phenol oxidases from Mangifera indica L. sap (latex)

Mango sap (latex), a by-product in mango industry, was separated into upper non-aqueous phase and lower aqueous phase. Aqueous phase contains very low protein (4.3 mg/ml) but contains high specific activities for peroxidase and polyphenol oxidase. The aqueous phase of sap was subjected to ion-exchange chromatography on DEAE-Sephacel. The bound protein was separated into three enzyme peaks: peak I showed peroxidase activity, peak II showed polyphenol oxidase activity and peak III showed activities against substrates of peroxidase as well as polyphenol oxidase. On native PAGE and SDS-PAGE, each peak showed a single band. Based on the substrate specificity and inhibitor studies peak III was identified as laccase. Although they showed variations in their mobility on native PAGE, these enzymes showed similar molecular weight of 100,000 ± 5000. These enzymes exhibited maximum activity at pH 6 however, polyphenol oxidase showed good activity even in basic pH. Peroxidase and polyphenol oxidase showed stability up to 70 °C while laccase was found to be stable up to 60 °C. Syringaldazine was the best substrate for laccase while catechol was the best for polyphenol oxidase. Thus, mango sap a by-product in mango industry is a good source of these phenol oxidases.     

A novel membrane-surface liquid co-culture to improve the production of laccase from Ganoderma lucidum

In this work, a laccase producer, Ganoderma lucidum, was separated and identified according to its morphological characteristics and phylogenetic data. A 4000 U/l and 8500 U/l of laccase activity was obtained in 500 ml flask by submerged culture and biomembrane-surface liquid culture (BSLC), respectively. Furthermore, the novel biomembrane-surface liquid co-culture (BSLCc) was developed by adding Saccharomyces cerevisiae to reactor in order to shorten the fermentation period and improve laccase production. Laccase activity obtained by BSLCc, 23 000 U/l, is 5.8 and 2.7 times of that obtained by submerged culture and BSLC, respectively. In addition, laccase production by BSLCc was successfully scaled-up to 100 l reactor, and 38 000 U/l of laccase activity was obtained on day 8. The mechanism of overproducing laccase by BSLCc was investigated by metabolism pathway analysis of glucose. The results show glucose limitation in fermentation broth induces the secretion of laccase. The addition of S. cerevisiae, on one hand, leads to an earlier occurrence of glucose limitation state, and thus shortens the fermentation time; on the other hand, it also results in the appearance of a series of metabolites of the yeast including organic acids, ethanol, glycerol and so forth in fermentation broth, and both polyacrylamide gel electrophoresis analysis and enzyme activity detection of laccase show that these metabolites contribute to the improvement of laccase activity.     

Characterization and kinetic properties of the purified Trematosphaeria mangrovei laccase enzyme

The properties of Trematosphaeria mangrovei laccase enzyme purified on Sephadex G-100 column were investigated. SDS–PAGE of the purified laccase enzyme showed a single band at 48 kDa. The pure laccase reached its maximal activity at temperature 65 °C, pH 4.0 with K_m equal 1.4 mM and V_max equal 184.84 U/mg protein. The substrate specificity of the purified laccase was greatly influenced by the nature and position of the substituted groups in the phenolic ring. The pure laccase was tested with some metal ions and inhibitors, FeSO₄ completely inhibited laccase enzyme and also highly affected by (NaN₃) at a concentration of 1 mM. Amino acid composition of the pure enzyme was also determined. Carbohydrate content of purified laccase enzyme was 23% of the enzyme sample. The UV absorption spectra of the purified laccase enzyme showed a single peak at 260–280 nm.     

Surface functionalized mesoporous activated carbon for the immobilization of acidic lipase and their application to hydrolysis of waste cooked oil: Isotherm and kinetic studies

This study deals with the surface functionalization of mesoporous activated carbon, using ethylenediamine and glutaraldehyde to facilitate the strong immobilization of acidic lipase (AL) onto MAC. The AL was produced from Pseudomonas gessardii by using slaughterhouse lipid waste as the substrate. The AL immobilized on functionalized mesoporous activated carbon (ALFMAC) was applied for the hydrolysis of waste cooked oil (WCO). The optimum conditions for the immobilization of AL onto functionalized mesoporous activated carbon (FMAC) were 90 min; pH 3.5; and 35 °C; which resulted at the maximum immobilization of 5440 U/g of FMAC (3.693 mg of AL/g of FMAC or the yield 2.7% or the expressed activity 103.7% or the activity per unit area of FMAC 1.08 mg of AL/m²). The ALFMAC showed better thermal and storage stabilities than the free AL. The ALFMAC retained a 98% and a 92% initial activity at 40 °C and 50 °C, respectively, while the AL showed the thermal stability (residual activities) 65% and 38%, respectively. The storage stability of ALFMAC at 4 °C showed 100% initial activity up to 15 days from the initial day of the storage, whereas AL showed only 88% initial activity up to 15 days. The FMAC and ALFMAC were characterized by using scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, and X-ray diffraction (XRD) analysis. The K_m values of the ALFMAC and AL were 0.112 mM and 0.411 mM, respectively. The v_max values of the ALFMAC and AL were 1.26 mM/min and 0.53 mM/min, respectively. Immobilization of AL onto FMAC obeyed the Freundlich and Redlich–Peterson isotherm models. The non-linear models of pseudo first, and second order, intra-particle diffusion, Bangham, and Boyd plot were also performed to understand the dynamic mechanism of immobilization. ALFMAC showed a 100% hydrolysis of WCO up to 21 cycles of reuse, and 60% up to 45 cycles. The hydrolysis of WCO was confirmed by using FT-IR spectra.     

Electrostatic immobilization of pectinase on negatively charged AOT-Fe3O4 nanoparticles

Enzyme immobilization on magnetic nanoparticles (MNPs) has been a field of intense studies in biotechnology during the past decade. The present study suggests MNPs negatively charged by docusate sodium salt (AOT) as a support for pectinase immobilization. AOT is a biocompatible anionic surfactant which can stabilize MNPs. Electrostatic adsorption can occur between enzyme with positive charge and oppositely charged surface of MNPs (ca. 100 nm). The effect of three factors, i.e. initial enzyme concentration, aqueous pH and AOT concentration in different levels was investigated on pectinase immobilization. Maximum specific activity (1.98 U/mg enzyme) of immobilized pectinase and maximum enzyme loading of 610.5 mg enzyme/g support was attained through the experiments. Initial enzyme concentration is significantly important on both loading and activity of immobilized enzyme, while pH and AOT concentration only affect the amount of immobilized enzyme. Immobilized enzyme on MNPs was recovered easily through magnetic separation. At near pH of immobilization, protein leakage in reusability of immobilized enzyme was low and activity loss was only 10–20% after six cycles. Since pH is associated with immobilization by electrostatic adsorption, the medium pH was changed to improve the release of protein from the support, as well. MNPs properties were investigated using Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FT-IR) spectroscopy, and Dynamic Light Scattering (DLS) analysis.     

Purification and characterization of a new laccase from Shiraia sp.SUPER-H168

A new laccase from Shiraia sp.SUPER-H168 was purified by ion exchange column chromatography and gel permeation chromatography and the apparent molecular mass of this enzyme was 70.78 kDa, as determined by MALDI/TOF-MS. The optimum pH value of the purified laccase was 4, 6, 5.5 and 3 with 2,6-dimethoxyphenol (DMP), syringaldazine, guaiacol and 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) as substrates, respectively. The optimum temperature of the purified laccase was 50 °C using DMP, syringaldazine and guaiacol as substrates, but 60 °C for ABTS. Inhibitors and metal ions of SDS, NaN₃, Ag⁺ and Fe³⁺ showed inhibition on enzyme activity of 10.22%, 7.86%, 8.13% and 67.50%, respectively. Fe²⁺ completely inhibited the purified laccase. The K_cat/K_m values of the purified laccase toward DMP, ABTS guaiacol and syringaldazine were 3.99 × 10⁶, 3.74 × 10⁷, 8.01 × 10⁴ and 2.35 × 10⁷ mol^?1 L S^?1, respectively. The N-terminal amino acid sequence of the purified laccase showed 36.4% similarity to Pleurotus ostrestus. Approximately 66% of the Acid Blue 129 (100 mg L^?1) was decolorized by 2.5 U of the purified laccase after a 120 min incubation at 50 °C. Acid Red 1 (20 mg L^?1) and Reactive Black 5 (50 mg L^?1) were decolorized by the purified laccase after the addition of Acid Blue 129 (100 mg L^?1).     

Geranyl acetate synthesis catalyzed by Thermomyces lanuginosus lipase immobilized on electrospun polyacrylonitrile nanofiber membrane

Isolated Thermomyces lanuginosus lipase (TLL) was immobilized by different protocols on the polyacrylonitrile nanofibers membrane. The conditions for immobilization of TLL were optimized by investigating effect of protein concentration, time and temperature on the extent of immobilization. The effect of immobilization on the catalytic activity and stability of lipase was studied thoroughly. The immobilized TLL was used as biocatalyst for geranyl acetate synthesis with geraniol and vinyl acetate as substrates and their performance was compared with free enzyme. The TLL immobilized by physical adsorption shows higher transesterification and hydrolytic activities than that of covalently linked or native TLL. There was 32 and 9 fold increase in transesterification activity of TLL immobilized by adsorption and covalent bonding, while hydrolytic activity increases only by 3.6 and 1.8 fold respectively. The optimum conditions for immobilization in both the cases were immobilization time 90–150 min, temperature 45 °C and protein concentration of 2 mg/ml. The percentage conversion of ester was more than 90% and 66% in case of physically adsorbed and covalently bonded enzyme respectively as compared to native one. However, covalently immobilized TLL shows higher operational stability than native and physically adsorbed TLL.     

Heterologous production of a temperature and pH-stable laccase from Bacillus vallismortis fmb-103 in Escherichia coli and its application

To enhance laccase yield, the laccase gene from Bacillus vallismortis fmb-103 was cloned and heterologously expressed in Escherichia coli BL21 (DE3) cells. The auto-induction strategy was applied during fermentation, and the process was controlled, as follows: Cu²⁺ was added when the optical density at 600 nm (OD₆₀₀) was 0.3, the fermentation temperature was adjusted to 16 °C when the OD₆₀₀ was 0.9, and fermentation was stopped after 50 h. The yield of recombinant laccase was up to 3420 U/L, as assayed by 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid). Recombinant laccase was purified 4.47-fold by heating for 10 min at 70 °C and dialyzing against 50–60% ammonium sulfate, retained more than 50% activity after 10 h at 70 °C, and demonstrated broad pH stability. Malachite green was efficiently degraded by recombinant laccase, especially in combination with mediators. These results provided a basis for the future application of recombinant laccase to malachite green degradation.     

Textile dye degrading laccase from Pseudomonas desmolyticum NCIM 2112

A laccase requiring optimum temperature 60 °C, pH 4.0 for the activity and having apparent molecular weight 43,000 Da was purified from Pseudomonas desmolyticum NCIM 2112 by three steps, including heating, anion exchange, and molecular sieve chromatography. The purification fold and yield of laccase obtained through Biogel P100 were 45.75 and 19%, respectively. Staining of native gel with L-dopa showed dark brown color band indicating the presence of laccase. In relation to hydroquinone, the substrate specificity of laccase was in the following order: DAB > o-tolidine > ABTS > L-dopa. The absence of monophenolase activity in eluted fractions conformed that the purified protein is laccase. This laccase showed substrate dependent optimum pH character. Effect of inhibitor and metal ion on enzyme activity was analyzed. UV–vis analysis showed the decolorization of Direct Blue-6, Green HE4B and Red HE7B in the presence of laccase. The FTIR spectral comparison between the control dye sample and the metabolites extracted after decolorization by purified laccase have confirmed degradation of these dyes. This study contributes for the structural requirement of a dye to be degradable by P. desmolyticum laccase and is important in order to optimize potential bioremediation systems for industrial textile process water treatment.     

Immobilized glucose oxidase on different supports for biotransformation removal of glucose from oligosaccharide mixtures

Four immobilized forms of glucose oxidase (GOD) were used for biotransformation removal of glucose from its mixture with dextran oligosaccharides. GOD was biospecifically bound to Concanavalin A-bead cellulose (GOD-ConA-TBC) and covalently to triazine-bead cellulose (GOD-TBC). Eupergit C and Eupergit CM were used for preparation of other two forms of immobilized GOD: GOD-EupC and GOD-EupCM. GOD-ConA-TBC and GOD-EupC exhibited the best operational and storage stabilities. pH and temperature optima of these two immobilized enzyme forms were broadened and shifted to higher values (pH 7 and 35 °C) in comparison with those of free GOD. The decrease of V_max values after immobilization was observed, from 256.8 ± 7.0 μmol min⁻¹ mg_GOD⁻¹ for free enzyme to 63.8 ± 4.2 μmol min⁻¹ mg_GOD⁻¹ for GOD-ConA-TBC and 45 ± 2.7 μmol min⁻¹ mg_GOD⁻¹ for GOD-EupC, respectively. Depending on the immobilization mode, the immobilized GODs were able to decrease the glucose content in solution to 3.8–15.6% of its initial amount The best glucose conversion, was achieved by an action of GOD-EupCM on a mixture of 100 g dextran with 9 g of glucose (i.e. 98.7% removal of glucose).     

Laccase immobilization on mesostructured cellular foams affords preparations with ultra high activity

Extracellular laccase produced by the wood-rotting fungus Cerrena unicolor was immobilized covalently on the mesostructured siliceous cellular foams (MCFs) functionalised using various organosilanes with amine and glycidyl groups. The experiments indicated that laccase bound via glutaraldehyde to MCFs modified using 2-aminoethyl-3-aminopropyltrimethoxysilane remains very active. In the best biocatalyst activity was about 42,700 U mL^?1 carrier (66,800 U mg^?1 bound protein), and hence significantly higher than ever reported before. Optimisation of the immobilization procedure with respect to protein concentration, pH of coupling mixture and the enzyme purity afforded the biocatalyst with activity of about 90,980 U mL^?1. For the best preparation, thermal- and pH-stability, and activity profiles were determined. Experiments carried out in a batch reactor showed that k_cat/K_m for immobilized enzyme (0.88 min^?1 μM^?1) was acceptable lower than the value obtained for the native enzyme (2.19 min^?1 μM^?1). Finally, potentials of the catalysts were tested in the decolourisation of indigo carmine without redox-mediators. Seven consecutive runs with the catalysts separated by microfiltration proved that adsorption of the dye onto the carrier and enzymatic oxidation contribute to the efficient decolourisation without loss of immobilized enzyme activity.     

Effect of kinesthetic illusion induced by visual stimulation on muscular output function after short-term immobilization

Kinesthetic illusions by visual stimulation (KiNVIS) enhances corticomotor excitability and activates motor association areas. The purpose of this study was to investigate the effect of KiNVIS induction on muscular output function after short-term immobilization. Thirty subjects were assigned to 3 groups: an immobilization group, with the left hand immobilized for 12 h (immobilization period); an illusion group, with the left hand immobilized and additionally subjected to KiNVIS of the immobilized part during the immobilization period; and a control group with no manipulation. The maximum voluntary contraction (MVC), fluctuation of force (force fluctuation) during a force modulation task, and twitch force were measured both before (pre-test) and after (post-test) the immobilization period. Data were analyzed by performing two-way (TIME × GROUP) repeated measures ANOVA. The MVC decreased in the immobilization group only (pre-test; 37.8 ± 6.1 N, post-test; 32.8 ± 6.9 N, p < 0.0005) after the immobilization period. The force fluctuation increased only in the immobilization group (pre-test; 2.19 ± 0.54%, post-test; 2.78 ± 0.87%, p = 0.007) after the immobilization period. These results demonstrate that induction of KiNVIS prevents negative effect on MVC and force fluctuation after 12 h of immobilization.     

Enhancement of laccase production by Pleurotus ostreatus and its use for the decolorization of anthraquinone dye

The white-rot fungus Pleurotus ostreatus strain 32 is an excellent producer of the industrially important enzyme laccase. Laccase was the only ligninolytic activity detected in the supernatant when the fungus was grown in liquid culture with or without shaking. Growth and laccase production in static cultivation were superior to that in agitated cultivation, and N-limited culture is of benefit to laccase production. When using cellobiose and peptone as carbon and nitrogen source, a higher activity level was obtained. 2,2′-Azino-di-(3-ethylbenzothialozin-6-sulfonic acid) (ABTS) (1 mM) was shown to be the best inducer of laccase production, reaching maximum values of about 400 U/ml. Cu²⁺ (1 mM) also had a positive effect on laccase production, activity being enhanced to 360 U/ml. In addition, anthraquinone dye SN4R can be effectively decolorized by crude laccase (30 U/ml), the rate of which was 66%. The decolorization rate was increased by 90% with ABTS (0.16%) addition as a mediator of laccase.     

Aislamiento y evaluación de la actividad enzimática de hongos descomponedores de madera (Quindío,Colombia)

White rot fungi (Ascomycota and Basidiomycota) were collected on fallen trunks with different decay stages, in a subandean forest (La Montaña del Ocaso nature reserve), and it was evaluated their ligninolitic activity. They were cultured on malt extract agar. Then it was performed semiquantitative tests for laccase and cellobiose dehydrogenase (CDH) activity using ABTS and DCPIP as enzymatic inducers. Based on the results of these tests, the fungi with higher activities from trunks with different decay stages were selected: Cookeina sulcipes (for stage 1), a fungus from the family Corticiaceae (for stage 2), Xylaria polymorpha (for stage 3) and Earliella sp. (for stage 4). A fermentation was performed at 28 °C, during 11 days, in a rotatory shaker at 150 rpm. Biomass, glucose, proteins and enzyme activities measurements were performed daily. The fungi that were in the trunks with decay states from 1 to 3, showed higher laccase activity as the state of decay increased. A higher DCH activity was also associated with a higher. Also, there was a positive relationship between both enzymes' activities. Erliella was the fungus which presented the highest biomass production (1140,19 g/l), laccase activity (157 UL^?1) and CDH activity (43,50 UL^?1). This work is the first report of laccase and CDH activity for Cookeina sulcipes and Earliella sp. Moreover, it gives basis for the use of these native fungi in biotechnological applications and the acknowledgment of their function in the wood decay process in native forest.     

Activation of nylon net and its application to a biosensor for determination of glucose in human serum

A glucose biosensor using a glucose oxidase (GO_x)-immobilized nylon net with glutaraldehyde as cross-linking reagent and an oxygen (O₂) electrode for the determination of glucose has been fabricated. The detection scheme was based on the utilization of dissolved O₂ in oxidation of glucose by the membrane bound GO_x. Crucial factors including O-alkylation temperature, reaction times of nylon net with dimethyl sulfate, l-lysine, and glutaraldehyde, and enzyme loading were examined to determine the optimal enzyme immobilization conditions for the best sensitivity of the developed glucose biosensor. In addition, the effects of pH and concentration of phosphate buffer on the response of the biosensor were studied. The glucose biosensor had a linear range of 18 μM to 1.10 mM with the detection limit of 9.0 μM (S/N = 3) and response time of 80 s. The biosensor exhibited both good operational stability with over 200 measurements and long-term storage stability. The results from this biosensor compared well with those of a commercial glucose assay kit in analyzing human serum glucose samples.     

Do spawn storage conditions influence the colonization capacity of a wheat-straw-based substrate by Agaricus subrufescens?

Storage conditions of the spawn of edible fungi are of major importance to facilitate the production of mushrooms. Here, standard storage conditions at 10 °C or 15 °C were used and the potential of colonization of standard European compost by the tropical species Agaricus subrufescens was assessed during the spawn running phase. Two lignocellulolytic activities, laccase and CMC-cellulase, were enhanced after storage compared to control as well as substrate transformation, as described by the aromaticity ratio and a humification ratio calculated from NMR data. This result indicates that mycelium growth probably occurred during storage at 10 or 15 °C, leading to a larger amount of biomass in the inoculum. Moreover, the microbial functional diversity of the substrate was favored, showing that the electivity of the substrate was maintained. Thus, these findings indicate that recommendations for the mushroom producers can be established for A. subrufescens cultivation under European standard conditions.