共查询到20条相似文献,搜索用时 46 毫秒
1.
Kari M. Severson Michael Mallozzi Joel Bozue Susan L. Welkos Christopher K. Cote Katherine L. Knight Adam Driks 《Journal of bacteriology》2009,191(24):7587-7596
The Bacillus anthracis spore is the causative agent of the disease anthrax. The outermost structure of the B. anthracis spore, the exosporium, is a shell composed of approximately 20 proteins. The function of the exosporium remains poorly understood and is an area of active investigation. In this study, we analyzed the previously identified but uncharacterized exosporium protein ExsK. We found that, in contrast to other exosporium proteins, ExsK is present in at least two distinct locations, i.e., the spore surface as well as a more interior location underneath the exosporium. In spores that lack the exosporium basal layer protein ExsFA/BxpB, ExsK fails to encircle the spore and instead is present at only one spore pole, indicating that ExsK assembly to the spore is partially dependent on ExsFA/BxpB. In spores lacking the exosporium surface protein BclA, ExsK fails to mature into high-molecular-mass species observed in wild-type spores. These data suggest that the assembly and maturation of ExsK within the exosporium are dependent on ExsFA/BxpB and BclA. We also found that ExsK is not required for virulence in murine and guinea pig models but that it does inhibit germination. Based on these data, we propose a revised model of exosporium maturation and assembly and suggest a novel role for the exosporium in germination.During starvation, bacteria of the genus Bacillus differentiate into dormant, highly robust cell types called spores, thereby preserving their genomes during stressful and nutrient-poor conditions (10). Spores can withstand extremely harsh environmental insults, including toxic chemicals, UV radiation, and heat (31). When conditions again become favorable for cell survival, spores can return to vegetative cell growth through a process called germination (17, 18, 31, 49). Spores are formed in an approximately 8-h process during which the developing spore first forms as a compartment (the forespore) contained within the surrounding cell (the mother cell) (34). Ultimately, the mother cell envelope lyses, releasing the mature spore into the environment.Spores from all Bacillus species have similar architectures. At the spore interior is the core, which houses the spore chromosome. Surrounding the core is an inner membrane encased in a specialized peptidoglycan called the cortex and finally a series of outer layers that vary significantly among species (10). In some species, including Bacillus subtilis, the outermost structure is a protective layer called the coat, which guards the spore against reactive small molecules, degradative enzymes, and predation by other microbes (11, 17, 20, 38). Spores of other species, including the pathogens Bacillus anthracis, Bacillus cereus, and Bacillus thuringiensis and the nonpathogenic bacteria Bacillus megaterium and Bacillus odysseyi, have an additional structure called the exosporium, which surrounds the coat (24, 32, 47). The exosporium is composed of two structural units: the basal layer, which is a shell of proteins forming a hexagonal array, and a nap of hairlike protrusions extending outward from the basal layer (2, 32). A major component of the nap (and of the spore surface) is the collagen-like protein BclA (40, 43). The proteins that comprise the outer structures (the coat and exosporium) are synthesized in the mother cell cytoplasm, from which location they assemble onto the spore surface to form their respective structures (11).The function of the exosporium is poorly understood. Previous studies have implicated its contribution to germination, resistance to host cells and other stresses, adhesion to inert surfaces, and interactions with epithelial cells and macrophages (1, 6, 7, 13, 33, 41, 48; G. Chen, A. Driks, K. Tawfiq, M. Mallozzi, and S. Patil, submitted for publication). In most cases, however, the roles of individual exosporium proteins in each of these functions remain unclear, in part because the location of each protein within the exosporium is largely unknown.Interestingly, it appears that the exosporium is not essential for virulence of B. anthracis in several animal models (5, 7, 12, 13). Nonetheless, it is possible that in natural infections the exosporium plays a significant role. Because it is involved in attachment, the exosporium is also likely to have a significant impact on the persistence of B. anthracis spores in the environment.To gain insight into the molecular basis of exosporium assembly and function, we studied a previously identified but otherwise uncharacterized exosporium protein, ExsK. Using immunofluorescence microscopy (IFM), we found that ExsK is asymmetrically distributed on the surfaces of mature spores and is also present beneath the exosporium. In the absence of ExsFA/BxpB, ExsK was restricted to one spore pole, suggesting that the encirclement of the spore by ExsK depends on ExsFA/BxpB. Western blot analysis indicated that in mature spores ExsK is present in high-molecular-mass complexes, the formation of which is BclA dependent. Although ExsK is not required for several spore resistance properties or virulence, we found that it is required for normal germination. Our results provide a deeper understanding of the composition, function, and assembly of the B. anthracis exosporium and show that proteins comprising outer-spore structures can have multiple locations. 相似文献
2.
Ralf Moeller Peter Setlow Günther Reitz Wayne L. Nicholson 《Applied and environmental microbiology》2009,75(16):5202-5208
Spores of Bacillus subtilis contain a number of small, acid-soluble spore proteins (SASP) which comprise up to 20% of total spore core protein. The multiple α/β-type SASP have been shown to confer resistance to UV radiation, heat, peroxides, and other sporicidal treatments. In this study, SASP-defective mutants of B. subtilis and spores deficient in dacB, a mutation leading to an increased core water content, were used to study the relative contributions of SASP and increased core water content to spore resistance to germicidal 254-nm and simulated environmental UV exposure (280 to 400 nm, 290 to 400 nm, and 320 to 400 nm). Spores of strains carrying mutations in sspA, sspB, and both sspA and sspB (lacking the major SASP-α and/or SASP-β) were significantly more sensitive to 254-nm and all polychromatic UV exposures, whereas the UV resistance of spores of the sspE strain (lacking SASP-γ) was essentially identical to that of the wild type. Spores of the dacB-defective strain were as resistant to 254-nm UV-C radiation as wild-type spores. However, spores of the dacB strain were significantly more sensitive than wild-type spores to environmental UV treatments of >280 nm. Air-dried spores of the dacB mutant strain had a significantly higher water content than air-dried wild-type spores. Our results indicate that α/β-type SASP and decreased spore core water content play an essential role in spore resistance to environmentally relevant UV wavelengths whereas SASP-γ does not.Spores of Bacillus spp. are highly resistant to inactivation by different physical stresses, such as toxic chemicals and biocidal agents, desiccation, pressure and temperature extremes, and high fluences of UV or ionizing radiation (reviewed in references 33, 34, and 48). Under stressful environmental conditions, cells of Bacillus spp. produce endospores that can stay dormant for extended periods. The reason for the high resistance of bacterial spores to environmental extremes lies in the structure of the spore. Spores possess thick layers of highly cross-linked coat proteins, a modified peptidoglycan spore cortex, a low core water content, and abundant intracellular constituents, such as the calcium chelate of dipicolinic acid and α/β-type small, acid-soluble spore proteins (α/β-type SASP), the last two of which protect spore DNA (6, 42, 46, 48, 52). DNA damage accumulated during spore dormancy is also efficiently repaired during spore germination (33, 47, 48). UV-induced DNA photoproducts are repaired by spore photoproduct lyase and nucleotide excision repair, DNA double-strand breaks (DSB) by nonhomologous end joining, and oxidative stress-induced apurinic/apyrimidinic (AP) sites by AP endonucleases and base excision repair (15, 26-29, 34, 43, 53, 57).Monochromatic 254-nm UV radiation has been used as an efficient and cost-effective means of disinfecting surfaces, building air, and drinking water supplies (31). Commonly used test organisms for inactivation studies are bacterial spores, usually spores of Bacillus subtilis, due to their high degree of resistance to various sporicidal treatments, reproducible inactivation response, and safety (1, 8, 19, 31, 48). Depending on the Bacillus species analyzed, spores are 10 to 50 times more resistant than growing cells to 254-nm UV radiation. In addition, most of the laboratory studies of spore inactivation and radiation biology have been performed using monochromatic 254-nm UV radiation (33, 34). Although 254-nm UV-C radiation is a convenient germicidal treatment and relevant to disinfection procedures, results obtained by using 254-nm UV-C are not truly representative of results obtained using UV wavelengths that endospores encounter in their natural environments (34, 42, 50, 51, 59). However, sunlight reaching the Earth''s surface is not monochromatic 254-nm radiation but a mixture of UV, visible, and infrared radiation, with the UV portion spanning approximately 290 to 400 nm (33, 34, 36). Thus, our knowledge of spore UV resistance has been constructed largely using a wavelength of UV radiation not normally reaching the Earth''s surface, even though ample evidence exists that both DNA photochemistry and microbial responses to UV are strongly wavelength dependent (2, 30, 33, 36).Of recent interest in our laboratories has been the exploration of factors that confer on B. subtilis spores resistance to environmentally relevant extreme conditions, particularly solar UV radiation and extreme desiccation (23, 28, 30, 34 36, 48, 52). It has been reported that α/β-type SASP but not SASP-γ play a major role in spore resistance to 254-nm UV-C radiation (20, 21) and to wet heat, dry heat, and oxidizing agents (48). In contrast, increased spore water content was reported to affect B. subtilis spore resistance to moist heat and hydrogen peroxide but not to 254-nm UV-C (12, 40, 48). However, the possible roles of SASP-α, -β, and -γ and core water content in spore resistance to environmentally relevant solar UV wavelengths have not been explored. Therefore, in this study, we have used B. subtilis strains carrying mutations in the sspA, sspB, sspE, sspA and sspB, or dacB gene to investigate the contributions of SASP and increased core water content to the resistance of B. subtilis spores to 254-nm UV-C and environmentally relevant polychromatic UV radiation encountered on Earth''s surface. 相似文献
3.
4.
5.
Sanghamitra Mukhopadhyay Arya Akmal Andrew C. Stewart Ru-ching Hsia Timothy D. Read 《Molecular & cellular proteomics : MCP》2009,8(6):1174-1191
We sought to identify proteins in the Bacillus anthracis spore, conserved in other strains of the closely related Bacillus cereus group, that elicit an immune response in mammals. Two high throughput approaches were used. First, an in silico screening identified 200 conserved putative B. anthracis spore components. A total of 192 of those candidate genes were expressed and purified in vitro, 75 of which reacted with the rabbit immune sera generated against B. anthracis spores. The second approach was to screen for cross-reacting antigens in the spore proteome of 10 diverse B. cereus group strains. Two-dimensional electrophoresis resolved more than 200 protein spots in each spore preparation. About 72% of the protein spots were found in all the strains. 18 of these conserved proteins reacted against anti-B. anthracis spore rabbit immune sera, two of which (alanine racemase, Dal-1 and the methionine transporter, MetN) overlapped the set of proteins identified using the in silico screen. A conserved repeat domain protein (Crd) was the most immunoreactive protein found broadly across B. cereus sensu lato strains. We have established an approach for finding conserved targets across a species using population genomics and proteomics. The results of these screens suggest the possibility of a multiepitope antigen for broad host range diagnostics or therapeutics against Bacillus spore infection.The anthrax causing bacterium Bacillus anthracis is a member of the Bacillus cereus sensu lato (s.l.)1 group, a term given to the polyphyletic species consisting of Bacillus thuringiensis, Bacillus cereus, Bacillus mycoides, Bacillus weihenstephanensis, and Bacillus pseudomycoides (1). Genomics studies of B. cereus s.l. strains have shown a similar chromosomal gene composition within this group (2–7). Many phenotypes that distinguish B. cereus s.l. members, such as crystalline toxin production (8), emesis in humans (9), and anthrax virulence (10), are encoded by genes on large plasmids. Experimental conjugative transfer of plasmids between B. cereus s.l. strains has been demonstrated in vitro, in complex media, and in vector species (11–13). Therefore there is a concern about transfer of virulence genes between genetic backgrounds creating new pathogen lineages. In this regard, there is an emerging evidence of natural dissemination of the pXO1 and pXO2 plasmids that encode the anthrax lethal toxin and capsule, respectively. For example, B. cereus G9241 carries a pXO1 plasmid and lethal toxin genes almost identical to those in B. anthracis (6), and a B. cereus strain, which causes anthrax-like illness in African great apes, apparently contains both pXO1 and pXO2 plasmids (14).The infectious agent of most if not all human B. cereus s.l. diseases is the spore. The spore is a dormant, environmentally resistant structure that persists in nutrient- or water-limiting conditions. Anthrax infection occurs after introduction of the B. anthracis spore into a skin abrasion or via inhalation or ingestion (10). The spore germinates inside host cells, and the resulting vegetative bacteria express toxins and capsules that elicit an immune response (10, 15, 16). Formation of the B. cereus spore involves asymmetric cell division during which a copy of the genome is partitioned into each of the sister cells. The smaller cell (prespore) develops into mature endospore, and the larger cell (mother cell) contributes to the differentiation process but undergoes autolysis following its completion to release the endospore into the surrounding medium. Synthesis of cortex, coat, and exosporium are a function mainly of the mother cell. The cortex and coat layers are in close proximity to one another, whereas the exosporium tends to appear as an irregularly shaped, loosely attached, balloon-like layer (17–20). The coat and the exosporium contribute to the remarkable resistance of spores to extreme physical and chemical stresses including the exposure to extraterrestrial conditions (21, 22). Recent work on the structure, composition, assembly, and function of the spore coat and exosporium of pathogenic organisms like B. anthracis and B. cereus have highlighted the crucial link that exists between the origin of these layers (19, 23). There are differences in the appearance and thickness of the coat layers among the spores of various strains and species. In some B. thuringiensis strains, the inner coat is laminated but consists of a patchwork of striated packets, appearing either stacked or comblike, and the outer coat is granular (24), whereas in B. anthracis and other B. cereus s.l. isolates the coat appears compact (25–27). The coat layers comprise about 30% of the total proteins present in the spore (19, 28). Intraspecies variation in the structure and composition of the spore surface layers may reflect the environmental conditions under which these spores are formed (29–31).Because the spore is crucial to infection and persistence of B. anthracis and its close relatives, we undertook an investigation of its protein profile variability across the B. cereus s.l. group. Our goal in this study was to identify conserved antigenic spore proteins that may be transitioned in the future as candidates for immunodiagnostics, therapeutics, or vaccines. We used two high throughput approaches: genome-based bioinformatics analysis and comparative proteomics analysis of spores of B. cereus s.l. to select conserved targets. Our analysis revealed a list of conserved spore proteins within B. cereus but relatively few cross-reacting antigens. Two of these spore conserved antigens (Crd and MetN) have not been described previously for B. anthracis. 相似文献
6.
Daisuke Imamura Ritsuko Kuwana Hiromu Takamatsu Kazuhito Watabe 《Journal of bacteriology》2010,192(2):518-524
Bacterial spores are encased in a multilayered proteinaceous shell known as the coat. In Bacillus subtilis, over 50 proteins are involved in spore coat assembly but the locations of these proteins in the spore coat are poorly understood. Here, we describe methods to estimate the positions of protein fusions to fluorescent proteins in the spore coat by using fluorescence microscopy. Our investigation suggested that CotD, CotF, CotT, GerQ, YaaH, YeeK, YmaG, YsnD, and YxeE are present in the inner coat and that CotA, CotB, CotC, and YtxO reside in the outer coat. In addition, CotZ and CgeA appeared in the outermost layer of the spore coat and were more abundant at the mother cell proximal pole of the forespore, whereas CotA and CotC were more abundant at the mother cell distal pole of the forespore. These polar localizations were observed both in sporangia prior to the release of the forespore from the mother cell and in mature spores after release. Moreover, CotB was observed at the middle of the spore as a ring- or spiral-like structure. Formation of this structure required cotG expression. Thus, we conclude not only that the spore coat is a multilayered assembly but also that it exhibits uneven spatial distribution of particular proteins.Proper localization and assembly of proteins in cells and subcellular structures are essential features of living organisms. Complex protein assemblies, including ribosomes, flagella, and the cytokinetic machinery, play important roles in bacteria (26, 27, 40). Studying how these complex structures are formed is a fundamental theme in molecular biology. In this work, we developed a method to analyze one of the most complex bacterial protein assemblies: the spore coat of Bacillus subtilis.Sporulation of B. subtilis is initiated in response to nutrient limitation, and it involves a highly ordered program of gene expression and morphological change (33, 42). The first morphological change of sporulation is the appearance of an asymmetrically positioned septum that divides the cell into a larger mother cell and a smaller forespore. Next, the mother cell membrane migrates around the forespore membrane during a phagocytosis-like process called engulfment. The completion of engulfment involves fusion of the mother cell membrane to pinch off the forespore within the mother cell. Compartment-specific gene expression brings about maturation of the spore and its release upon lysis of the mother cell (reviewed in reference 19). Mature spores remain viable during long periods of starvation and are resistant to heat, toxic chemicals, lytic enzymes, and other factors capable of damaging vegetative cells (30). Spores germinate and resume growth when nutrients become available (32).The outer portions of Bacillus spores consist of a cortex, a spore coat layer, and in some cases, an exosporium. The cortex, a thick layer of peptidoglycan, is deposited between the inner and the outer membranes of the forespore, and it is responsible for maintaining the highly dehydrated state of the core, thereby contributing to the extreme dormancy and heat resistance of spores. Spore coat assembly involves the deposition of at least 50 protein species (12, 21, 24) into two major layers: an electron-dense outer layer, called the outer coat, and a less electron-dense inner layer with a lamellar appearance, called the inner coat (50). These layers provide a protective barrier against bactericidal enzymes and chemicals, such as lysozyme and organic solvents (30). Although disruption of any one gene encoding a spore coat protein typically has little or no effect on spore resistance, morphology, or germination, a few proteins, referred to as morphogenetic proteins, play central roles in the assembly of the spore coat (7, 10, 13). One of the morphogenetic proteins, CotE, is located between the inner and outer coats and directs the assembly of most or all of the outer coat proteins and also a few of the inner coat proteins (2, 9, 17, 25, 52). The locations of CotE, CotS, and SpoIVA in the spore coat were determined previously by immunoelectron microscopy (9, 43). CotA, CotB, CotC, and CotG were shown to be externally exposed on the surface of the spore by single-molecule recognition force spectroscopy or antibody accessibility (15, 18, 45, 28). However, the positions of most of the spore coat proteins in the coat have not been determined experimentally, although provisional assignments were made based largely on the control of assembly into the coat by CotE (17). In this study, we developed methods to estimate the positions of proteins in the spore coat layers by using fluorescence microscopy analysis of coat protein-fluorescent protein fusions, with resolution that allowed us to distinguish between the inner and outer coats. In addition, we discovered an asymmetric spatial distribution of four spore coat proteins and a ring- or spiral-like structure of CotB. These observations suggest that spore coat assembly is more intricate than previously appreciated. 相似文献
7.
Jonathan D. Giebel Katherine A. Carr Erica C. Anderson Philip C. Hanna 《Journal of bacteriology》2009,191(18):5569-5576
The bacterial spore cortex is critical for spore stability and dormancy and must be hydrolyzed by germination-specific lytic enzymes (GSLEs), which allows complete germination and vegetative cell outgrowth. We created in-frame deletions of three genes that encode GSLEs that have been shown to be active in Bacillus anthracis germination: sleB, cwlJ1, and cwlJ2. Phenotypic analysis of individual null mutations showed that the removal of any one of these genes was not sufficient to disrupt spore germination in nutrient-rich media. This finding indicates that these genes have partially redundant functions. Double and triple deletions of these genes resulted in more significant defects. Although a small subset of ΔsleB ΔcwlJ1 spores germinate with wild-type kinetics, for the overall population there is a 3-order-of-magnitude decrease in the colony-forming efficiency compared with wild-type spores. ΔsleB ΔcwlJ1 ΔcwlJ2 spores are unable to complete germination in nutrient-rich conditions in vitro. Both ΔsleB ΔcwlJ1 and ΔsleB ΔcwlJ1 ΔcwlJ2 spores are significantly attenuated, but are not completely devoid of virulence, in a mouse model of inhalation anthrax. Although unable to germinate in standard nutrient-rich media, spores lacking SleB, CwlJ1, and CwlJ2 are able to germinate in whole blood and serum in vitro, which may explain the persistent low levels of virulence observed in mouse infections. This work contributes to our understanding of GSLE activation and function during germination. This information may result in identification of useful therapeutic targets for the disease anthrax, as well as provide insights into ways to induce the breakdown of the protective cortex layer, facilitating easier decontamination of resistant spores.Bacillus anthracis, a gram-positive spore-forming bacterium, is the causative agent of anthrax. The dormant spore form is the infectious particle and produces three different forms of the disease depending on the route of entry into a suitable host (8). When spores enter through a skin lesion and when they are ingested, they cause cutaneous and gastrointestinal anthrax, respectively. Spores entering through the lungs cause the most severe form of the disease, inhalation anthrax, which is often fatal even with aggressive antibiotic therapy (1, 8, 34). Because true pneumonias are rarely seen in victims, it is believed that inhaled spores do not germinate in the lung but are phagocytosed by alveolar macrophages and germinate intracellularly en route to the mediastinal lymph nodes, which leads to dissemination, septicemia, toxemia, and often death (1, 34). It has been shown that the spores are able to germinate and the bacteria are able to multiply inside macrophages both in cell culture and in the lungs of challenged animals (7, 11, 28, 29).Independent of the route of infection, spore germination inside a susceptible host is essential for disease. The highly stable spore form of the bacterium can remain viable under harsh environmental conditions for many decades (32). However, a spore can form a rapidly dividing vegetative cell upon entry into a host and recognition of specific chemical signals, or germinants, through specialized germinant receptors (32). The spore cortex, a thick layer of modified peptidoglycan (PG), contributes much of the spore''s environmental resistance as it is necessary to maintain dehydration of the spore core (25). This protective barrier is broken down following the activation of germination-specific lytic enzymes (GSLEs), allowing full core rehydration and cell outgrowth (32). Experimentally, germination can also be triggered by nongerminant treatments, such as lysozyme treatment, high pressure, exogenous Ca2+-dipicolinic acid treatment, and treatment with cationic surfactants (32). Several of these treatments likely cause spore cortex hydrolysis, triggering spore germination. This indicates the importance of cortex degradation in the spore germination process.Bacterial cell wall PG consists of polysaccharide chains of repeating N-acetylglucosamine and N-acetylmuramic acid, joined by β(1,4) glycosidic bonds (25). This basic structure is modified in several ways in spore cortex PG. In one major modification, 50% of the muramic acid residues (alternating every other residue) are converted to muramic-δ-lactam residues (25). This modification is essential for the specificity of GSLEs for degrading the cortex and prevents degradation of the bacterial cell wall during cortex hydrolysis (21).Previous work on the role of GSLEs in Bacillus subtilis and, recently, in B. anthracis has shown that the enzymes SleB and CwlJ have partially redundant roles and are necessary together for full cortex hydrolysis and spore germination (6, 14). SleB is a lytic transglycosylase that, when activated by an unknown mechanism, hydrolyzes the bond between N-acetylmuramic acid and N-acetylglucosamine (5). In both B. subtilis and B. anthracis, the sleB gene is found in a bicistronic operon with ypeB. Although the function of YpeB is not known, deletion of ypeB prevents SleB activity in spore germination, and sleB and ypeB mutants have similar phenotypes (5). Expression of both gene products is necessary for the presence of SleB in the cortex and inner membrane of mature spores (2, 5).Although no specific enzymatic activity has been attributed to CwlJ, it is required for full germination and it shares a homologous catalytic domain with SleB (20). In B. subtilis and Bacillus cereus, cwlJ is found in an operon with gerQ. Similar to the finding that ypeB is necessary for a functional SleB protein, gerQ is required for CwlJ activity (26). The B. anthracis genome contains two homologs of cwlJ (designated cwlJ1 and cwlJ2 [14]), whereas a single copy is present in B. subtilis and B. cereus. As it is in the related species, cwlJ1 is found in an operon with gerQ, but cwlJ2 is in a different locus and is not in an operon with a gerQ homolog (14). It has been shown that CwlJ is localized to the spore coat and that it is necessary for spore germination with exogenous Ca2+-dipicolinic acid treatment (3, 24).GSLE activation represents a critical step in the complex process of germination. The relatively small number of genes involved and the apparent essential nature of their activity make them attractive targets for new therapeutics, as well as environmental decontamination compounds. The objective of this study was to test by using genetic analysis the role of the GSLE genes sleB, cwlJ1, and cwlJ2 in B. anthracis spore germination. Mutants lacking these three genes were tested to determine their effects on in vitro germination kinetics and colony-forming efficiency. Additionally, the virulence of these mutant strains was examined by comparing mutant and wild-type spores in an in vivo mouse model of inhalational anthrax. 相似文献
8.
Jie Wei Ishita M. Shah Sonali Ghosh Jonathan Dworkin Dallas G. Hoover Peter Setlow 《Journal of bacteriology》2010,192(5):1455-1458
Superdormant spores of Bacillus cereus and Bacillus subtilis germinated just as well as dormant spores with pressures of 150 or 500 MPa and with or without heat activation. Superdormant B. subtilis spores also germinated as well as dormant spores with peptidoglycan fragments or bryostatin, a Ser/Thr protein kinase activator.Spores of Bacillus species are formed in sporulation, a process that is generally triggered by starvation for one or more nutrients (13, 19). These spores are metabolically dormant and extremely resistant to a large variety of environmental stresses, including heat, radiation, and toxic chemicals, and as a consequence of these properties, these spores can remain viable in their dormant state for many years (13, 18, 19). However, spores are constantly sensing their environment, and if nutrients return, the spores can rapidly return to growth through the process of spore germination (17). Spore germination is generally triggered by specific nutrients that bind to nutrient germinant receptors, with this binding alone somehow triggering germination. However, spore germination can also be triggered by many non-nutrient agents, including cationic surfactants such as dodecylamine, a 1:1 complex of Ca2+ with pyridine-2,6-dicarboxylic acid (dipicolinic acid [DPA], a major spore small molecule), very high pressures, specific peptidoglycan fragments, and bryostatin, an activator of Ser/Thr protein kinases (17, 19, 20). For nutrient germinants in particular, spore germination is also potentiated by a prior sublethal heat treatment termed heat activation (17).While normally the great majority of spores in populations germinate relatively rapidly in response to nutrient germinants, a small percentage of spores germinate extremely slowly. These spores that are refractory to nutrient germination have been termed superdormant spores and are a major concern for the food industry (8). Recently superdormant spores of three Bacillus species have been isolated by repeated germination of spore populations with specific nutrient germinants and isolation of remaining dormant spores (5, 6). These superdormant spores germinate extremely poorly with the nutrient germinants used in superdormant spore isolation, as well as with other nutrient germinants. All of the specific defects leading to spore superdormancy are not known, although an increased level of receptors for specific nutrient germinants decreases levels of superdormant spores obtained with the nutrients that are ligands for these receptors (5). Superdormant spores also have significantly higher temperature optima for heat activation of nutrient germination than the spore population as a whole (7).In contrast to the poor germination of superdormant spores with nutrient germinants, superdormant spores germinate normally with dodecylamine and Ca-DPA (5, 6). This is consistent with possible roles of nutrient germinant receptor levels and/or heat activation temperature optima in affecting spore superdormancy, since neither dodecylamine nor Ca-DPA triggers Bacillus spore germination through nutrient germinant receptors, and germination with these agents is also not stimulated by heat activation (11, 15, 17). However, the effects of high pressures, peptidoglycan fragments, and bryostatin, all of which almost certainly trigger spore germination by mechanisms at least somewhat different than triggering of germination by nutrients, dodecylamine, and Ca-DPA (2, 3, 11, 15, 20, 22, 23), have not been tested for their effects on superdormant spores. Consequently, we have compared the germination of dormant and superdormant spores of two Bacillus species by high-pressures, peptidoglycan fragments, and bryostatin.The spores used in this work were from Bacillus subtilis PS533 (16), a derivative of strain 168 that also carries plasmid pUB110, providing resistance to kanamycin (10 μg/ml), and Bacillus cereus T (originally obtained from H. O. Halvorson). Spores of these strains were prepared and purified as described previously (6, 10, 12). Superdormant spores of B. subtilis were prepared by germination following heat activation at 75°C for 30 min by two germination treatments at 37°C with 10 mM l-valine for 2 h, followed by isolation of remaining dormant spores, all as described previously (5, 10, 12). These superdormant spores germinated extremely poorly with 10 mM valine at 37°C, giving ≤10% germination in 2 h at 37°C, while the initial spore population exhibited >95% germination under the same conditions (data not shown). Superdormant B. cereus spores were isolated similarly, although heat activation was at 65°C for 30 min and the germinant was 5 mM inosine as described previously (6). These superdormant B. cereus spores exhibited <5% germination with inosine in 2 h at 37°C compared to the >95% germination of the initial dormant spores under the same conditions (data not shown). 相似文献
9.
10.
Bacillus anthracis spores are enclosed by an exosporium comprised of a basal layer and an external hair-like nap. The filaments of the nap are composed of trimers of the collagen-like glycoprotein BclA. The attachment of essentially all BclA trimers to the exosporium requires the basal layer protein BxpB, and both proteins are included in stable high-molecular-mass exosporium complexes. BclA contains a proteolytically processed 38-residue amino-terminal domain (NTD) that is essential for basal-layer attachment. In this report, we identify three NTD submotifs (SM1a, SM1b, and SM2, located within residues 21 to 33) that are important for BclA attachment and demonstrate that residue A20, the amino-terminal residue of processed BclA, is not required for attachment. We show that the shortest NTD of BclA—or of a recombinant protein—sufficient for high-level basal-layer attachment is a 10-residue motif consisting of an initiating methionine, an apparently arbitrary second residue, SM1a or SM1b, and SM2. We also demonstrate that cleavage of the BclA NTD is necessary for efficient attachment to the basal layer and that the site of cleavage is somewhat flexible, at least in certain mutant NTDs. Finally, we propose a mechanism for BclA attachment and discuss the possibility that analogous mechanisms are involved in the attachment of many different collagen-like proteins of B. anthracis and closely related Bacillus species.Bacillus anthracis, a Gram-positive, rod-shaped, aerobic bacterium, is the causative agent of anthrax (17). When vegetative cells of B. anthracis are starved for certain essential nutrients, they form dormant spores that can survive in harsh soil environments for many years (12, 19). Spore formation starts with asymmetric septation that divides the starved vegetative cell into two genome-containing compartments, a mother cell compartment and a smaller forespore compartment. The mother cell then engulfs the forespore and surrounds it with three protective layers: a cortex composed of peptidoglycan, a closely apposed proteinaceous coat, and a loosely fitting exosporium (11). After a spore maturation stage, the mother cell lyses and releases the mature spore. When spores encounter an aqueous environment containing nutrients, they can germinate and grow as vegetative cells (18). Anthrax is typically caused by contact with spores (17).The outermost layer of B. anthracis spores, the exosporium, has been studied intensively in recent years because it is both the first point of contact with the immune system of an infected host and the target of new detectors for agents of bioterrorism (21, 28, 32). The exosporium of B. anthracis and closely related pathogenic species, such as Bacillus cereus and Bacillus thuringiensis, is a prominent structure consisting of a paracrystalline basal layer and an external hair-like nap (1, 9). The filaments of the nap are formed by trimers of the collagen-like glycoprotein BclA (2, 29). Recent studies suggest that BclA plays a major role in pathogenesis by directing spores to professional phagocytic cells, a critical step in disease progression (4, 21). The basal layer is composed of approximately 20 different proteins (23, 25, 26), several of which have been shown to play key roles in exosporium assembly (3, 13, 27). One of these proteins is BxpB (also called ExsFA) (25, 30, 34), which is required for the attachment of approximately 98% of spore-bound BclA to the basal layer (26, 30). Residual BclA attachment requires the basal layer protein ExsFB, a paralog of BxpB (30).BclA contains three distinct domains: a 38-residue amino-terminal domain (NTD), a central collagen-like region containing a strain-specific number of XXG (mostly PTG) repeats, and a 134-residue carboxyl-terminal domain (CTD) (25, 29, 31). The CTD apparently functions as the major nucleation site for trimerization of BclA (24), and CTD trimers form the globular distal ends of the filaments in the nap (2). The highly extended collagen-like region is extensively glycosylated (5), and its length determines the depth of the nap (2, 31). The NTD is the site of attachment of BclA to the basal layer, and deletion of the NTD prevents this attachment (2). The NTD is normally proteolytically processed to remove the first 19 amino acids, and it is this mature form of BclA that is attached to the basal layer (25, 29). In an earlier report, we suggested that NTD processing of BclA is required for basal-layer attachment, perhaps through a direct covalent linkage to BxpB (26).Recently, Thompson and Stewart identified conserved 11-residue sequences in the NTDs of BclA and the minor B. anthracis collagen-like glycoprotein BclB and showed that these sequences are involved in the incorporation of BclA and BclB into the exosporium. These investigators used a truncated BclA NTD that lacked residues 2 through 19 but included the conserved 11-amino-acid sequence to target enhanced green fluorescent protein (EGFP) to the surface of the developing forespore (33). Thompson and Stewart also reported that cleavage of the BclA NTD occurred after its association with the forespore and suggested that this cleavage was involved indirectly in the attachment process. Actual cleavage sites were not determined in these studies, however. We have performed related studies of the attachment of BclA to the exosporium that provide a more detailed and somewhat different view of this process. In our studies, which are reported here, we identified short segments, or submotifs, of the BclA NTD that can be arranged in different combinations to produce 10-amino-acid motifs sufficient for tight attachment of BclA, and probably most proteins, to the exosporium basal layer. Additionally, we present direct evidence showing that BclA NTD cleavage is required for efficient attachment to the basal layer and that selection of the cleavage site can be somewhat flexible. Finally, we discuss a possible mechanism for BclA attachment and the likelihood that similar mechanisms are used for attachment of many different collagen-like proteins of B. anthracis and closely related Bacillus species. 相似文献
11.
Pengfei Zhang Will Garner Xuan Yi Ji Yu Yong-qing Li Peter Setlow 《Journal of bacteriology》2010,192(14):3608-3619
The simultaneous nutrient germination of hundreds of individual wild-type spores of three Bacillus species and a number of Bacillus subtilis strains has been measured by two new methods, and rates of release of the great majority of the large pool of dipicolinic acid (DPA) from individual spores of B. subtilis strains has been measured by Raman spectroscopy with laser tweezers. The results from these analyses and published data have allowed a number of significant conclusions about the germination of spores of Bacillus species as follows. (i) The time needed for release of the great majority of a Bacillus spore''s DPA once rapid DPA release had begun (ΔTrelease) during nutrient germination was independent of the concentration of nutrient germinant used, the level of the germinant receptors (GRs) that recognize nutrient germinants used and heat activation prior to germination. Values for ΔTrelease were generally 0.5 to 3 min at 25 to 37°C for individual wild-type spores. (ii) Despite the conclusion above, germination of individual spores in populations was very heterogeneous, with some spores in wild-type populations completing germination ≥15-fold slower than others. (iii) The major factor in the heterogeneity in germination of individual spores in populations was the highly variable lag time, Tlag, between mixing spores with nutrient germinants and the beginning of ΔTrelease. (iv) A number of factors decrease spores'' Tlag values including heat activation, increased levels of GRs/spore, and higher levels of nutrient germinants. These latter factors appear to affect the level of activated GRs/spore during nutrient germination. (v) The conclusions above lead to the simple prediction that a major factor causing heterogeneity in Bacillus spore germination is the number of functional GRs in individual spores, a number that presumably varies significantly between spores in populations.Spores of various Bacillus species are metabolically dormant and can survive for years in this state (30). However, spores constantly sense their environment, and if appropriate small molecules termed germinants are present, spores can rapidly return to life in the process of germination followed by outgrowth (25, 29, 30). The germinants that most likely trigger spore germination in the environment are low-molecular-weight nutrient molecules, the identities of which are strain and species specific, including amino acids, sugars, and purine nucleosides. Metabolism of these nutrient germinants is not needed for the triggering of spore germination. Rather, these germinants are recognized by germinant receptors (GRs) located in the spore''s inner membrane that recognize their cognate germinants in a stereospecific manner (17, 24, 25, 29). Spores have a number of such GRs, with three functional GRs in Bacillus subtilis spores and even more in Bacillus anthracis, Bacillus cereus, and Bacillus megaterium spores (6, 29, 30). Binding of nutrient germinants to some single GRs is sufficient to trigger spore germination, for example the triggering of B. subtilis spore germination by binding of l-alanine or l-valine to the GerA GR. However, many GRs cooperate such that binding of germinants by ≥2 different GRs is needed to trigger germination (2, 29): for example, the triggering of B. subtilis spore germination by the binding of components of a mixture of l-asparagine, d-glucose, d-fructose, and K+ ions (AGFK) to the GerB and GerK GRs. The binding of nutrient germinants to GRs triggers subsequent events in germination, although how this is accomplished is not known.The first readily measured biochemical event after addition of nutrient germinants to Bacillus spores is the rapid release of the spore''s large depot (∼10% of spore dry weight) of pyridine-2,6-dicarboxylic acid (dipicolinic acid [DPA]) plus its chelated divalent cations, predominantly Ca2+ (Ca-DPA), from the spore core (25, 29). Ca-DPA release then results in the activation of two redundant cortex-lytic enzymes (CLEs), CwlJ and SleB, which hydrolyze the spore''s peptidoglycan cortex layer (16, 22, 27, 29). CwlJ is activated by Ca-DPA as it is released from the spore while SleB is activated only after most DPA is released (17, 20, 22, 26, 27). Cortex hydrolysis ultimately allows the spore core to expand and take up more water, raising the core water content from the 35 to 45% of wet weight in the dormant spore to the 80% of wet weight characteristic of growing cells. Full hydration of the spore core then allows enzyme action, metabolism, and macromolecular synthesis to resume in the now fully germinated spore.Germination of spores in populations is very heterogeneous, with some spores germinating rapidly and some extremely slowly (4, 5, 9, 11, 13-15, 19, 26, 31, 32). Where it has been studied, the reason for this heterogeneity has been suggested to be due to a variable lag period (Tlag) between the time of mixing spores with a germinant and the time at which rapid DPA release begins, since once rapid DPA release begins, the time required for release of almost all DPA as well as for subsequent cortex hydrolysis is generally rather short compared to Tlag values in individual spores (5, 11, 13-15, 19, 26, 31, 32). The times required for DPA release and cortex hydrolysis are also similar in wild-type spores with both very short and long Tlag values (5, 15, 19, 27). The reasons for the variability in Tlag times between individual spores in populations are not known, although there are reports that both activation of spores for germination by a sublethal heat treatment (heat activation) as well as increasing concentrations of nutrient germinants can shorten Tlag values (12, 14, 15, 18, 32). However, there has been no detailed study of the causes of the variability in Tlag values between very large numbers of individual spores in populations.In order to study the heterogeneity in spore germination thoroughly, methods are needed to follow the germination of hundreds of individual spores over several hours. Initial studies of the germination of individual spores examined a single spore in a phase-contrast microscope and followed the germination of this spore by changes in the core''s refractive index due to DPA release and core swelling (14, 15, 32, 34). However, this method is labor-intensive for gathering data with hundreds of individual spores. More recently, confocal microscopy and then surface adsorption and optical tweezers have been used to capture single spores, and germination events have been followed by methods such as Raman spectroscopy to directly measure DPA release, as well as phase-contrast microscopy and elastic light scattering (3, 5, 9, 10, 19, 26). While the latter recent advances have allowed accumulation of much information about germination, collection of this type of data for large numbers of individual spores is still labor-intensive, although use of dual optical traps (35) and perhaps multiple traps in the future may alleviate this problem. However, phase-contrast microscopy plus appropriate computer software has recently allowed the monitoring of many hundreds of individual spores for several hours, with automated assessment of various changes in the cells during the period of observation (19). In the present work, we have used both phase-contrast and differential interference contrast (DIC) microscopy to monitor the germination of many hundreds of individual spores of three Bacillus species adhered on either an agarose pad or a glass coverslip for 1 to 2 h. This work, as well as examination of times needed for release of most DPA once rapid DPA release has begun during germination of individual spores under a variety of conditions, has allowed detailed examination of the effects of heat activation, nutrient germinant concentration, GR numbers per spore, and individual CLEs on spore germination heterogeneity and on values of Tlag for individual spores. 相似文献
12.
To cause disease, Clostridium difficile spores must germinate in the host gastrointestinal tract. Germination is initiated upon exposure to glycine and certain bile acids, e.g., taurocholate. Chenodeoxycholate, another bile acid, inhibits taurocholate-mediated germination. By applying Michaelis-Menten kinetic analysis to C. difficile spore germination, we found that chenodeoxycholate is a competitive inhibitor of taurocholate-mediated germination and appears to interact with the spores with greater apparent affinity than does taurocholate. We also report that several analogs of chenodeoxycholate are even more effective inhibitors. Some of these compounds resist 7α-dehydroxylation by Clostridium scindens, a core member of the normal human colonic microbiota, suggesting that they are more stable than chenodeoxycholate in the colonic environment.Clostridium difficile is a Gram-positive, spore-forming, anaerobic bacterium that is pathogenic for both humans and animals (33, 44). Infections caused by C. difficile range from mild diarrhea to more life-threatening conditions, such as pseudomembranous colitis (33). In the classic case, prior antibiotic treatment that disrupts the normally protective colonic flora makes patients susceptible to C. difficile infection (CDI) (35, 53). Other antibiotics, such as vancomycin and metronidazole, are the most commonly used treatments for CDI (54). However, because these antibiotics also disrupt the colonic flora, 10 to 40% of patients whose symptoms have been ameliorated suffer from relapsing CDI (15, 24). The annual treatment-associated cost for CDI in the United States is estimated to be between $750 million and $3.2 billion (8, 9, 16, 31). Moreover, the number of fatal cases of CDI has been increasing rapidly (14, 39). Thus, there is an urgent need to find alternative therapies for CDI.C. difficile infection likely is initiated by infection with the spore form of C. difficile (12). C. difficile elicits disease through the actions of two secreted toxins, TcdA and TcdB (48). TcdB was recently shown to be critical for pathogenesis in an animal model of disease (18). Since the toxins are produced by vegetative cells, not by spores (17), germination and outgrowth are prerequisites for pathogenesis.Spore germination is triggered by the interaction of small molecules, called germinants, with receptors within the spore inner membrane. These germinants vary by bacterial species and can include ions, amino acids, sugars, nucleotides, surfactants, or combinations thereof (43). The recognition of germinants triggers irreversible germination, leading to Ca2+-dipicolinic acid release, the uptake of water, the degradation of the cortex, and, eventually, the outgrowth of the vegetative bacterium (43). The germination receptors that C. difficile uses to sense the environment have not been identified. Based on homology searches, C. difficile germination receptors must be very different from known germination receptors (42), but they appear to be proteinaceous (13).Taurocholate, a primary bile acid, has been used for approximately 30 years by researchers and clinical microbiologists to increase colony formation by C. difficile spores from patient and environmental samples (3, 49, 51, 52). This suggested that C. difficile spores interact with bile acids along the gastrointestinal (GI) tract and that spores use a host-derived signal to initiate germination.The liver synthesizes the two major primary bile acids, cholate and chenodeoxycholate (40). These compounds are modified by conjugation with either taurine (to give taurocholate or taurochenodeoxycholate) or glycine (producing glycocholate or glycochenodeoxycholate). Upon secretion into the digestive tract, bile aids in the absorption of fat and cholesterol; much of the secreted bile is actively absorbed and recycled back to the liver for reutilization (40). Though efficient, enterohepatic recirculation is not complete; bile enters the cecum of the large intestine at a concentration of approximately 2 mM (30).In the cecum, bile is modified by the normal, benign colonic flora. First, bile salt hydrolases found on the surfaces of many bacterial species remove the conjugated amino acid, producing the deconjugated primary bile acids cholate and chenodeoxycholate (40). These deconjugated primary bile acids are further metabolized by only a few species of intestinal bacteria, including Clostridium scindens. C. scindens actively transports unconjugated primary bile acids into the cytoplasm, where they are 7α-dehydroxylated, converting cholate to deoxycholate and chenodeoxycholate to lithocholate (21, 40). The disruption of the colonic flora by antibiotic treatment abolishes 7α-dehydroxylation activity (41).Building upon the work on Wilson and others (51, 52), we demonstrated that taurocholate and glycine, acting together, trigger the loss of the birefringence of C. difficile spores (45). All cholate derivatives (taurocholate, glycocholate, cholate, and deoxycholate) stimulate the germination of C. difficile spores (45). Recently it was shown that taurocholate binding is prerequisite to glycine binding (37). At physiologically relevant concentrations, chenodeoxycholate inhibits taurocholate-mediated germination (46) and also inhibits C. difficile vegetative growth, as does deoxycholate (45). In fact, C. difficile spores use the relative concentrations of the various bile acids as cues for germination within the host (10).Since chenodeoxycholate is absorbed by the colonic epithelium and metabolized to lithocholate by the colonic flora (25, 40), the use of chenodeoxycholate as a therapy against C. difficile disease might be hindered by its absorption and conversion to lithocholate.Here, we further characterize the interaction of C. difficile spores with various bile acids and demonstrate that chenodeoxycholate is a competitive inhibitor of taurocholate-mediated germination. Further, we identify chemical analogs of chenodeoxycholate that are more potent inhibitors of germination and that resist 7α-dehydroxylation by the colonic flora, potentially increasing their stability and effectiveness as inhibitors of C. difficile spore germination in the colonic environment. 相似文献
13.
Pengfei Zhang Lingbo Kong Peter Setlow Yong-qing Li 《Applied and environmental microbiology》2010,76(6):1796-1805
Dual-trap laser tweezers Raman spectroscopy (LTRS) and elastic light scattering (ELS) were used to investigate dynamic processes during high-temperature treatment of individual spores of Bacillus cereus, Bacillus megaterium, and Bacillus subtilis in water. Major conclusions from these studies included the following. (i) After spores of all three species were added to water at 80 to 90°C, the level of the 1:1 complex of Ca2+ and dipicolinic acid (CaDPA; ∼25% of the dry weight of the spore core) in individual spores remained relatively constant during a highly variable lag time (Tlag), and then CaDPA was released within 1 to 2 min. (ii) The Tlag values prior to rapid CaDPA release and thus the times for wet-heat killing of individual spores of all three species were very heterogeneous. (iii) The heterogeneity in kinetics of wet-heat killing of individual spores was not due to differences in the microscopic physical environments during heat treatment. (iv) During the wet-heat treatment of spores of all three species, spore protein denaturation largely but not completely accompanied rapid CaDPA release, as some changes in protein structure preceded rapid CaDPA release. (v) Changes in the ELS from individual spores of all three species were strongly correlated with the release of CaDPA. The ELS intensities of B. cereus and B. megaterium spores decreased gradually and reached minima at T1 when ∼80% of spore CaDPA was released, then increased rapidly until T2 when full CaDPA release was complete, and then remained nearly constant. The ELS intensity of B. subtilis spores showed similar features, although the intensity changed minimally, if at all, prior to T1. (vi) Carotenoids in B. megaterium spores'' inner membranes exhibited two changes during heat treatment. First, the carotenoid''s two Raman bands at 1,155 and 1,516 cm−1 decreased rapidly to a low value and to zero, respectively, well before Tlag, and then the residual 1,155-cm−1 band disappeared, in parallel with the rapid CaDPA release beginning at Tlag.Bacterial spores of Bacillus species are formed in sporulation and are metabolically dormant and extremely resistant to a variety of harsh conditions, including heat, radiation, and many toxic chemicals (37). Since spores of these species are generally present in foodstuffs and cause food spoilage and food-borne disease (37, 38), there has long been interest in the mechanisms of both spore resistance and spore killing, especially for wet heat, the agent most commonly used to kill spores. The killing of dormant spores by wet heat generally requires temperatures about 40°C higher than those for the killing of growing cells of the same strain (37, 43). A number of factors influence spore wet-heat resistance, with a major factor being the spore core''s water content, as spores with higher core water content are less wet-heat resistant than are spores with lower core water (15, 25). The high level of pyridine-2,6-dicarboxylic acid (dipicolinic acid [DPA]) and the types of its associated divalent cations, predominantly Ca2+, that comprise ∼25% of the dry weight of the core also contribute to spore wet-heat resistance, although how low core water content and CaDPA protect spores against wet heat is not known. The protection of spore DNA against depurination by its saturation with a group of α/β-type small, acid-soluble spore proteins also contributes to spore wet-heat resistance (14, 23, 33, 37).Despite knowledge of a number of factors important in spore wet-heat resistance, the mechanism for wet-heat killing of spores is not known. Wet heat does not kill spores by DNA damage or oxidative damage (35, 37). Instead, spore killing by this agent is associated with protein denaturation and enzyme inactivation (2, 7, 44), although specific proteins for which damage causes spore death have not been identified. Wet-heat treatment also often results in the release of the spore core''s large depot of CaDPA. The mechanism for this CaDPA release is not known but is presumably associated with the rupture of the spore''s inner membrane (7). In addition, the relationship between protein denaturation and CaDPA release is not clear, although recent work suggests that significant protein denaturation can occur prior to CaDPA release (7). Almost all information on spore killing by moist heat has been obtained with spore populations, and essentially nothing is known about the behavior of individual spores exposed to potentially lethal temperatures in water. Given the likely heterogeneity of spores in populations, in particular in their wet-heat resistances (16, 18, 39, 40), it could be most informative to analyze the behavior of individual spores exposed to high temperatures in water.Raman spectroscopy is widely used in biochemical studies, as this technique has high sensitivity and responds rapidly to subtle changes in molecule structure (1, 22, 31). In addition, when Raman spectroscopy is combined with confocal microscopy and optical tweezers, the resultant laser tweezers Raman spectroscopy (LTRS) allows the nondestructive, noninvasive detection of biochemical processes at the single-cell level (9, 10, 19, 46). Indeed, LTRS has been used to analyze the DPA level and the germination of individual Bacillus spores (5, 19, 30). In order to obtain information more rapidly, dual- and multitrap laser tweezers have been developed to allow multiple individual cells or particles to be analyzed simultaneously (11, 13, 24, 27), and the dual trap has been used to measure the hydrodynamic cross-correlations of two particles (24). In addition to Raman scattering, the elastic light scattering (ELS) from trapped individual cells also provides valuable information on cell shape, orientation, refractive index, and morphology (12, 45) and has been used to monitor spore germination dynamics as well (30).In this work, we report studies of wet-heat treatment of individual spores of three different Bacillus species by dual-trap LTRS and ELS. A number of important processes related to wet-heat inactivation of spores, including CaDPA release and protein denaturation, and the correlation between these processes were investigated by monitoring changes in Raman scattering at CaDPA-, protein structure-, and phenylalanine-specific bands and changes in ELS intensity. 相似文献
14.
Superdormant spores of Bacillus subtilis and Bacillus megaterium were isolated in 4 to 12% yields following germination with high nutrient levels that activated one or two germinant receptors. These superdormant spores did not germinate with the initial nutrients or those that stimulated other germinant receptors, and the superdormant spores'' defect was not genetic. The superdormant spores did, however, germinate with Ca2+-dipicolinic acid or dodecylamine. Although these superdormant spores did not germinate with high levels of nutrients that activated one or two nutrient germinant receptors, they germinated with nutrient mixtures that activated more receptors, and using high levels of nutrient mixtures activating more germinant receptors decreased superdormant spore yields. The use of moderate nutrient levels to isolate superdormant spores increased their yields; the resultant spores germinated poorly with the initial moderate nutrient concentrations, but they germinated well with high nutrient concentrations. These findings suggest that the levels of superdormant spores in populations depend on the germination conditions used, with fewer superdormant spores isolated when better germination conditions are used. These findings further suggest that superdormant spores require an increased signal for triggering spore germination compared to most spores in populations. One factor determining whether a spore is superdormant is its level of germinant receptors, since spore populations with higher levels of germinant receptors yielded lower levels of superdormant spores. A second important factor may be heat activation of spore populations, since yields of superdormant spores from non-heat-activated spore populations were higher than those from optimally activated spores.Spores of various Bacillus species are formed in sporulation and are metabolically dormant and very resistant to environmental stress factors (21, 37). While such spores can remain in this dormant, resistant state for long periods, they can return to life rapidly through the process of germination, during which the spore''s dormancy and extreme resistance are lost (36). Spore germination has long been of intrinsic interest, and continues to attract applied interest, because (i) spores of a number of Bacillus species are major agents of food spoilage and food-borne disease and (ii) spores of Bacillus anthracis are a major bioterrorism agent. Since spores are much easier to kill after they have germinated, it would be advantageous to trigger germination of spores in foods or the environment and then readily inactivate the much less resistant germinated spores. However, this simple strategy has been largely nullified because germination of spore populations is heterogeneous, with some spores, often called superdormant spores, germinating extremely slowly and potentially coming back to life long after treatments are applied to inactivate germinated spores (8, 9, 16). The concern over superdormant spores in populations also affects decisions such as how long individuals exposed to B. anthracis spores should continue to take antibiotics, since spores could remain dormant in an individual for long periods and then germinate and cause disease (3, 11).In many species, spore germination can be increased by a prior activation step, generally a sublethal heat treatment, although the changes taking place during heat activation are not known (16). Spore germination in Bacillus species is normally triggered by nutrients such as glucose, amino acids, or purine ribosides (27, 36). These agents bind to germinant receptors located in the spore''s inner membrane that are specific for particular nutrients. In Bacillus subtilis, the GerA receptor responds to l-alanine or l-valine, while the GerB and GerK receptors act cooperatively to respond to a mixture of l-asparagine (or l-alanine), d-glucose, d-fructose and K+ ions (AGFK [or Ala-GFK]) (1, 27, 36). There are even more functional germinant receptors in Bacillus megaterium spores, and these respond to d-glucose, l-proline, l-leucine, l-valine, or even salts, such as KBr (6). Glucose appears to trigger germination of B. megaterium spores through either of two germinant receptors, GerU or GerVB, while l-proline triggers germination through only the GerVB receptor, and KBr germination is greatly decreased by the loss of either GerU or GerVB (6). Nutrient binding to the germinant receptors triggers the release of small molecules from the spore core, most notably the huge depot (∼10% of spore dry weight) of pyridine-2,6-dicarboxylic acid (dipicolinic acid [DPA]) present in spores predominantly as a 1:1 diluted chelate with Ca2+ (Ca-DPA) (35, 36). Ca-DPA release then triggers the activation of one of two redundant cortex lytic enzymes (CLEs) that degrade the spore''s peptidoglycan cortex, and cortex degradation completes spore germination and allows progression into outgrowth and then vegetative growth (27, 33, 36).Spore germination can also be triggered by nonnutrient agents, including Ca-DPA and cationic surfactants (27, 33, 36). With B. subtilis spores, Ca-DPA triggers germination by activating one particular CLE, termed CwlJ, and bypasses the spore''s germinant receptors. Germination by the cationic surfactant dodecylamine also bypasses the germinant receptors, and this agent appears to release small molecules including Ca-DPA from the spore core either by opening a normal channel in the spore''s inner membrane for Ca-DPA and other small molecules or by creating such a channel (31, 38, 39).Almost all work on the specifics of the germination of spores of Bacillus species has focused on the majority of spores in populations, and little detailed attention has been paid to that minority of spores that either fail to germinate or germinate extremely slowly. However, it is these latter spores that are most important in unraveling the cause of superdormancy and perhaps suggesting a means to germinate and thus easily inactivate such superdormant spores. Consequently, we have undertaken the task of isolating superdormant spores from spore populations, using buoyant density centrifugation to separate dormant spores from germinated spores. The properties of these purified superdormant spores were then studied, and this information has suggested some reason(s) for spore superdormancy. 相似文献
15.
Rachele Isticato Assunta Pelosi Maurilio De Felice Ezio Ricca 《Journal of bacteriology》2010,192(4):949-954
CotE is a morphogenic protein that controls the assembly of the coat, the proteinaceous structure that surrounds and protects the spore of Bacillus subtilis. CotE has long been thought to interact with several outer coat components, but such interactions were hypothesized from genetic experiment results and have never been directly demonstrated. To study the interaction of CotE with other coat components, we focused our attention on CotC and CotU, two outer coat proteins known to be under CotE control and to form a heterodimer. We report here the results of pull-down experiments that provide the first direct evidence that CotE contacts other coat components. In addition, coexpression experiments demonstrate that CotE is needed and sufficient to allow formation of the CotC-CotU heterodimer in a heterologous host.The spore of Bacillus subtilis is a dormant cell, resistant to harsh conditions and able to survive extreme environmental conditions (25). Spores are produced in a sporangium that consists of an inner cell, the forespore, that will become the mature spore and an outer cell, the mother cell, that will lyse, liberating the mature spore (18, 26). Resistance of the spore to noxious chemicals, lytic enzymes, and predation by soil protozoans is in part due to the coat, a complex, multilayered structure of more than 50 proteins that encases the spore (5, 8, 13). Proteins that constitute the coat are produced in the mother cell and deposited around the outer membrane surface of the forespore in an ordered manner (8).A small subset of coat proteins have a regulatory role on the formation of the coat. Those proteins, referred to as morphogenic factors, do not affect the synthesis of the coat components but drive their correct assembly outside of the outer forespore membrane (8). Within this subset of regulatory coat proteins, SpoIVA and CotE play a crucial role. SpoIVA (6, 20, 23) is assembled into the basement layer of the coat and is anchored to the outer membrane of the forespore through its C terminus that contacts SpoVM, a small, amphipathic peptide embedded in the forespore membrane (16, 21, 22). A spoIVA-null mutation impairs the assembly of the coat around the forming spore, and as a consequence, coat material accumulates in the mother cell cytoplasm (23).CotE (28) assembles into a ring and surrounds the SpoIVA basement structure. The inner layer of the coat is then formed between the SpoIVA basement layer and the CotE ring by coat components produced in the mother cell that infiltrate through the CotE ring, while the outer layer of the coat is formed outside of CotE (6). However, not all CotE molecules are assembled into the ring-like structure, and CotE molecules are also found in the mother cell cytoplasm, at least up to 8 h after the start of sporulation (3). CotE was first identified as a morphogenic factor in a seminal study in which an ultrastructural analysis indicated that a cotE-null mutation prevented formation of the electron-dense outer layer of the coat while it did not affect inner coat formation (28). A subsequent mutagenesis study has revealed that CotE has a modular structure with a C-terminal domain involved in directing the assembly of various coat proteins, an internal domain involved in the targeting of CotE to the forespore, and a N-terminal domain that, together with the internal domain, directs the formation of CotE multimers (17). More recently, formation of CotE multimers has been also confirmed by a yeast two-hybrid approach (14). In a global study of protein interactions in the B. subtilis coat, performed by a fluorescence microscopy analysis of a collection of strains carrying cot-gfp fusions, CotE has been proposed to interact with most outer coat components (12).From those and other studies, the interactions of CotE with coat structural components have been exclusively inferred on the basis of genetic experiment results, i.e., cotE mutants that failed to assemble one or more coat components. Evidence of a direct interaction between CotE and another coat component has never been provided. We addressed this issue by using as a model two coat components, CotC and CotU, known to be controlled by CotE and to form a heterodimer (10, 28).CotC is an abundant, 66-amino-acid protein known to assemble in the outer coat in various forms: a monomer of 12 kDa, a homodimer of 21 kDa, and two less abundant forms of 12.5 and 30 kDa, probably due to posttranslational modifications of CotC (9). CotU is a structural homolog of CotC of 86 amino acids. The two proteins, which share an almost identical N terminus and a less conserved C terminus, interact, originating the formation of a heterodimer of 23 kDa (10). Heterodimer formation most likely requires a B. subtilis-specific factor since it does not occur in Escherichia coli or Saccharomyces cerevisiae (10). CotC and CotU are synthesized in the mother cell compartment of the sporulating cell but do not accumulate there since they are immediately assembled around the forming spore (10). In a strain carrying a cotE-null mutation, CotC and CotU, together with all other outer coat components, do not assemble around the forming spore (10). CotC and CotU are also dependent on CotH, an additional morphogenic factor involved in coat formation (9). A cotH-null mutation prevents CotC and CotU assembly in the coat as well as their accumulation in the mother cell cytoplasm (10). Since a mutation causing cotH overexpression allows CotC and CotU accumulation in the mother cell cytoplasm (1), it has been proposed that CotH acts by stabilizing CotC and CotU in the mother cell cytoplasm (1, 10).Here we provide the first direct evidence that CotE interacts with two other coat components, CotC and CotU, and show that CotE is essential and sufficient to mediate CotC-CotU interaction to form a heterodimer. 相似文献
16.
Sonali Ghosh Pengfei Zhang Yong-qing Li Peter Setlow 《Journal of bacteriology》2009,191(18):5584-5591
Purified superdormant spores of Bacillus cereus, B. megaterium, and B. subtilis isolated after optimal heat activation of dormant spores and subsequent germination with inosine, d-glucose, or l-valine, respectively, germinate very poorly with the original germinants used to remove dormant spores from spore populations, thus allowing isolation of the superdormant spores, and even with alternate germinants. However, these superdormant spores exhibited significant germination with the original or alternate germinants if the spores were heat activated at temperatures 8 to 15°C higher than the optimal temperatures for the original dormant spores, although the levels of superdormant spore germination were not as great as those of dormant spores. Use of mixtures of original and alternate germinants lowered the heat activation temperature optima for both dormant and superdormant spores. The superdormant spores had higher wet-heat resistance and lower core water content than the original dormant spore populations, and the environment of dipicolinic acid in the core of superdormant spores as determined by Raman spectroscopy of individual spores differed from that in dormant spores. These results provide new information about the germination, heat activation optima, and wet-heat resistance of superdormant spores and the heterogeneity in these properties between individual members of dormant spore populations.Spores of Bacillus species are formed in sporulation and are metabolically dormant and extremely resistant to a variety of stress factors (31, 32). While spores can remain dormant for long periods, if given the proper stimulus, they can rapidly “return to life” in the process of spore germination followed by outgrowth (30). Since spores are generally present in significant amounts on many foodstuffs and growing cells of a number of Bacillus species are significant agents of food spoilage and food-borne disease (32), there is continued applied interest in spore resistance and germination. While dormant spores can be killed by a treatment such as wet heat, this requires high temperatures that are costly and detrimental to food quality. Consequently, there has long been interest in triggering spore germination in foodstuffs, since germinated spores have lost the extreme resistance of dormant spores and are relatively easy to kill. However, this strategy has been difficult to apply because of the significant heterogeneity in germination rates between individual spores in populations. One reflection of this heterogeneity is the extremely variable lag times following addition of germinants but prior to initiation of germination events; while these lag times can vary from 10 to 30 min for most spores in populations, some spores have lag times of many hours or even many days (2, 12, 13, 15, 25). The spores that are extremely slow to germinate have been termed superdormant spores, and populations of superdormant spores have recently been isolated from three Bacillus species, and their germination properties characterized (9, 10). These superdormant spores germinate extremely poorly with the original germinants used to remove dormant spores from spore populations, thus allowing superdormant spore isolation, and also poorly with a number of other germinants, in particular, germinants that target nutrient germinant receptors different than those activated to isolate the superdormant spores. However, the superdormant spores germinate reasonably well with mixtures of nutrient germinants that target multiple germinant receptors. All reasons for spore superdormancy are not known, but one contributing factor is the number of nutrient germinant receptors in the spore''s inner membrane that trigger spore germination by binding to nutrient germinants (9). The levels of these receptors are most likely in the tens of molecules per spore (24), and thus stochastic variation in receptor numbers might result in some spores with such low receptor numbers that these spores germinate very poorly (23). Indeed, 20- to 200-fold elevated levels of at least one nutrient germinant receptor greatly decreases yields of superdormant spores of Bacillus subtilis (9).Spores of Bacillus species generally exhibit a requirement for an activation step in order to exhibit maximum germination (17). Usually this activation is a sublethal heat treatment that for a spore population exhibits an optimum of 60 to 100°C depending on the species. Spores are also extremely resistant to wet heat, generally requiring temperatures of 80 to 110°C to achieve rapid spore killing, with the major factor influencing the wet-heat resistance of spores of mesophilic strains being the spore core''s water content, which can be as low as 30% of wet weight as water in a fully hydrated spore (8, 19, 27, 28, 31). Invariably, increases in core water content are associated with a decrease in spore wet-heat resistance (8, 19, 22, 25). While spore populations most often exhibit log-linear kinetics of wet-heat killing, the observation of tailing in such killing curves at high levels of killing is not uncommon, suggesting there is significant heterogeneity in the wet-heat resistances of individual spores in populations (27, 28). While there has been no comparable work suggesting that there is also heterogeneity in the temperature optima for heat activation of individual spores in populations, this certainly seems possible and indeed was suggested as one cause of spore superdormancy, as yields of superdormant spores from spore populations that are not heat activated are much higher (9, 10). Consequently, the current work was initiated to test the hypothesis that superdormant spores require heat activation temperatures that are higher than those of the original dormant spores. Once this was found to be the case, the wet-heat resistance and core water content of the superdormant and original dormant spores were compared, and the environment of the spore core''s major small molecule, pyridine-2,6-dicarboxylic acid (dipicolinic acid [DPA]) was assessed by Raman spectroscopy of individual spores. 相似文献
17.
Spores of Bacillus species are said to be committed when they continue through nutrient germination even when germinants are removed or their binding to spores'' nutrient germinant receptors (GRs) is both reversed and inhibited. Measurement of commitment and the subsequent release of dipicolinic acid (DPA) during nutrient germination of spores of Bacillus cereus and Bacillus subtilis showed that heat activation, increased nutrient germinant concentrations, and higher average levels of GRs/spore significantly decreased the times needed for commitment, as well as lag times between commitment and DPA release. These lag times were also decreased dramatically by the action of one of the spores'' two redundant cortex lytic enzymes (CLEs), CwlJ, but not by the other CLE, SleB, and CwlJ action did not affect the timing of commitment. The timing of commitment and the lag time between commitment and DPA release were also dependent on the specific GR activated to cause spore germination. For spore populations, the lag times between commitment and DPA release were increased significantly in spores that germinated late compared to those that germinated early, and individual spores that germinated late may have had lower appropriate GR levels/spore than spores that germinated early. These findings together provide new insight into the commitment step in spore germination and suggest several factors that may contribute to the large heterogeneity among the timings of various events in the germination of individual spores in spore populations.Spores of Bacillus species can remain dormant for long times and are extremely resistant to a variety of environmental stresses (26). However, under appropriate conditions, normally upon the binding of specific nutrients to spores'' nutrient germinant receptors (GRs), spores can come back to active growth through a process called germination followed by outgrowth (19, 20, 25, 26). Germination of Bacillus subtilis spores can be triggered by l-alanine or l-valine or a combination of l-asparagine, d-glucose, d-fructose, and K+ (AGFK). These nutrient germinants trigger germination by binding to and interacting with GRs that have been localized to the spore''s inner membrane (12, 20). l-Alanine and l-valine bind to the GerA GR, while the AGFK mixture triggers germination by interacting with both the GerB and GerK GRs (25). Normally, l-asparagine alone does not trigger B. subtilis spore germination. However, a mutant form of the GerB GR, termed GerB*, displays altered germinant specificity such that l-asparagine alone will trigger the germination of gerB* mutant spores (1, 18).A number of events occur in a defined sequence during spore germination. Initially, exposure of spores to nutrient germinants causes a reaction that commits spores to germinate, even if the germinant is removed or displaced from its cognate GR (7, 10, 21, 27, 28). This commitment step is followed by release of monovalent cations, as well as the spore core''s large pool of pyridine-2,6-dicarboxylic acid (dipicolinic acid [DPA]) along with divalent cations, predominantly Ca2+, that are chelated with DPA (Ca-DPA). In Bacillus spores, the release of Ca-DPA triggers the hydrolysis of spores'' peptidoglycan cortex by either of two cortex lytic enzymes (CLEs), CwlJ and SleB (11, 16, 23). CwlJ is activated during germination by Ca-DPA as it is being released from individual spores, while SleB activation requires that most Ca-DPA be released (14, 16, 17). Cortex hydrolysis, in turn, allows the spore core to expand and fully hydrate, which leads to activation of enzymes and initiation of metabolism in the spore core (21, 25).As noted above, commitment is the first event that can be assessed during spore germination, although the precise mechanism of commitment is not known. Since much has been learned about proteins important in spore germination in the many years since commitment was last studied (25, 26), it seemed worth reexamining commitment, with the goal of determining those factors that influence this step in the germination process. Knowledge of factors important in determining kinetics of commitment could then lead to an understanding of what is involved in this reaction.Kinetic analysis of spore germination, as well as commitment, has mostly been based on the decrease in optical density at 600 nm (OD600) of spore suspensions, which monitors a combination of events that occur well after commitment, including DPA release, cortex hydrolysis, and core swelling (25-27). In the current work, we have used a germination assay that measures DPA release, an early event in spore germination, and have automated this assay to allow routine measurement of commitment, as well as DPA release from large numbers of spore samples simultaneously. This assay has allowed comparison of the kinetics of DPA release and commitment during germination and study of the effects of heat activation, germinant concentration, GR levels, and CLEs on commitment. 相似文献
18.
19.
Trevor D. Lawley Nicholas J. Croucher Lu Yu Simon Clare Mohammed Sebaihia David Goulding Derek J. Pickard Julian Parkhill Jyoti Choudhary Gordon Dougan 《Journal of bacteriology》2009,191(17):5377-5386
Clostridium difficile, a major cause of antibiotic-associated diarrhea, produces highly resistant spores that contaminate hospital environments and facilitate efficient disease transmission. We purified C. difficile spores using a novel method and show that they exhibit significant resistance to harsh physical or chemical treatments and are also highly infectious, with <7 environmental spores per cm2 reproducibly establishing a persistent infection in exposed mice. Mass spectrometric analysis identified ∼336 spore-associated polypeptides, with a significant proportion linked to translation, sporulation/germination, and protein stabilization/degradation. In addition, proteins from several distinct metabolic pathways associated with energy production were identified. Comparison of the C. difficile spore proteome to those of other clostridial species defined 88 proteins as the clostridial spore “core” and 29 proteins as C. difficile spore specific, including proteins that could contribute to spore-host interactions. Thus, our results provide the first molecular definition of C. difficile spores, opening up new opportunities for the development of diagnostic and therapeutic approaches.Clostridium difficile is a gram-positive, spore-forming, anaerobic bacterium that can asymptomatically colonize the intestinal tracts of humans and other mammals (3, 30, 39). Antibiotic treatment can result in C. difficile overgrowth and can lead to clinical disease, ranging from diarrhea to life-threatening pseudomembranous colitis, particularly in immunocompromised hosts (2, 4, 7). In recent years, C. difficile has emerged as the major cause of nosocomial antibiotic-induced diarrhea, and it is frequently associated with outbreaks (21, 22). A contributing factor is that C. difficile can be highly infectious and difficult to contain, especially when susceptible patients are present in the same hospital setting (13).Person-to-person transmission of C. difficile is associated with the excretion of highly resistant spores in the feces of infected patients, creating an environmental reservoir that can confound many infection control measures (29, 44). Bacterial spores, which are metabolically dormant cells that are formed following asymmetric cell division, normally have thick concentric external layers, the spore coat and cortex, that protect the internal cytoplasm (15, 42). Upon germination, spores lose their protective external layers and resume vegetative growth (24, 27, 36). Bacillus spores and the spores of most Clostridium species germinate in response to amino acids, carbohydrates, or potassium ions (24, 36). In contrast, C. difficile spores show an increased level of germination in response to cholate derivatives found in bile (40, 41). Thus, spores are well adapted for survival and dispersal under a wide range of environmental conditions but will germinate in the presence of specific molecular signals (24, 36).While the spores of a number of Bacillus species, such as Bacillus subtilis and Bacillus anthracis, and those of other Clostridium species, such as Clostridium perfringens (15, 20), have been well characterized, research on C. difficile spores has been relatively limited. A greater understanding of C. difficile spore biology could be exploited to rationalize disinfection regimes, molecular diagnostics, and the development of targeted treatments such as vaccines. Here we describe a novel method to isolate highly purified C. difficile spores that maintain their resistance and infectious characteristics, thus providing a unique opportunity to study C. difficile spores in the absence of vegetative cells. A thorough proteomic and genomic analysis of the spore provides novel insight into the unique composition and predictive biological properties of C. difficile spores that should underpin future research into this high-profile but poorly understood pathogen. 相似文献
20.
Ryuichi Hirota Yumehiro Hata Takeshi Ikeda Takenori Ishida Akio Kuroda 《Journal of bacteriology》2010,192(1):111-116
Silicon (Si) is considered to be a “quasiessential” element for most living organisms. However, silicate uptake in bacteria and its physiological functions have remained obscure. We observed that Si is deposited in a spore coat layer of nanometer-sized particles in Bacillus cereus and that the Si layer enhances acid resistance. The novel acid resistance of the spore mediated by Si encapsulation was also observed in other Bacillus strains, representing a general adaptation enhancing survival under acidic conditions.Silicon (Si), the second-most-abundant element in the earth''s crust, is an important mineral for living organisms; it acts as a component of the outer skeleton of diatomaceous protozoans (1), as a trace element to help animal bone and tooth development (5), and as an element in plants that enhances their tissue strength and disease resistance (8, 9). These organisms take up silicate from the environment and accumulate it as silica that is formed from highly concentrated silicate (27). In 1980, relatively high concentrations of Si were observed at the spore coat region of Bacillus cereus and Bacillus megaterium spores by an analysis using scanning transmission electron microscopy (STEM) (14, 23). However, due to the low resolution and relatively weak signal, the precise localization of Si was not determined. On the other hand, the Si contents of Bacillus coagulans and Bacillus subtilis spores were reported to be almost absent or under the detection limit (4, 24). Some bacteriologists familiar with these data consider the presence of Si an anomaly (17). The presence of Si in bacterial spores (specifically, the spores of Bacillus anthracis) again became the focus of attention when anthrax spores were mailed to U.S. senators in the fall of 2001 (17). The Senate anthrax spores could be easily dispersed as single spores when the container was opened. The investigators considered that coating spores with silica might be involved in preventing spores from sticking to each other (17). Thus, if silica is normally absent from spores, its presence in B. anthracis spores suggested that they had been weaponized (17). Subsequent analysis convinced the investigators that the Si was a natural occurrence (3). However, since silica-rich and -poor spores of the same bacterial strain have never been compared, any relationship between naturally accumulated silica and spore dispersion remained hypothetical.In the present study, we screened for the bacterium that takes up the largest amount of silicate from among a number of strains isolated from paddy field soil in order to study Si uptake, clarify the localization of Si, and reveal the roles of Si in bacteria. The effect of silica on spore dispersion was also discussed. 相似文献