Dynamics of IS-related genetic rearrangements in resting Escherichia coli K-12

An analysis of restriction fragment length polymorphism (RFLP) using eight residential insertion sequence (IS) elements as hybridization probes reveals that the genome of resting bacteria is more dynamic than it was long believed. Escherichia coli strains stored in agar stabs for up to 30 yr accumulate a genetic variation which is correlated to time of storage. This spontaneous mutagenesis is often IS-specific, with particularly high activity for IS5, and thus suggests that transpositional DNA rearrangements are a major cause for the observed genetic polymorphism. The RFLP patterns indicate a burst of IS30 transposition to occur occasionally. Mutation rate is estimated by two different methods to roughly 10(-5) IS-related DNA rearrangements per bacterial chromosome per hour of storage for the eight IS elements studied. A pedigree derived from the RFLP data reveals that populations had evolved independently in each stab and showed no signs of convergence. Relics of an assumed ancestral population were still present in the stab cultures, but the elder stabs provided mostly mutants. These results indicate that cells placed under nutritional deprivation might have a highly plastic genome and suggest that such plasticity might play an adaptive role.      

Lack of hotspot targets: a constraint for IS30 transposition in Salmonella

IS30 is an insertion element common in E. coli strains but rare or absent in Salmonella. Transfer of the IS30-flanked transposon Tn2700 to Salmonella typhimurium was assayed using standard delivery procedures of bacterial genetics (conjugation and transduction). Tn2700 'hops' were rare and required transposase overproduction, suggesting the existence of host constraints for IS30 activity. Sequencing of three Tn2700 insertions in the genome of S. typhimurium revealed that the transposon had been inserted into sites with a low homology to the IS30 consensus target, suggesting that inefficient Tn2700 transposition to the Salmonella genome might be caused by a lack of hotspot targets. This view was confirmed by the introduction of an IS30 'hot target sequence', whose sole presence permitted Tn2700 transposition without transposase overproduction. Detection of IS30-induced DNA rearrangements in S. typhimurium provided further evidence that the element undergoes similar activities in E. coli and S. typhimurium. Thus, hotspot absence may be the main (if not the only) limitation for IS30 activity in the latter species. If these observations faithfully reproduce the scenario of natural populations, establishment of IS30 in the Salmonella genome may have been prevented by a lack of DNA sequences closely related to the unusually long (24 bp) IS30 consensus target.     

Role of the IS50 R proteins in the promotion and control of Tn5 transposition

IS50R, the inverted repeat sequence of Tn5 which is responsible for supplying functions that promote and control Tn5 transposition, encodes two polypeptides that differ at their N terminus. Frameshift, in-frame deletion, nonsense, and missense mutations within the N terminus of protein 1 (which is not present in protein 2) were isolated and characterized. The properties of these mutations demonstrate that protein 1 is absolutely required for Tn5 transposition. None of these mutations affected the inhibitory activity of IS50, confirming that protein 2 is sufficient to mediate inhibition of Tn5 transposition. The effects on transposition of increasing the amount of protein 2 (the inhibitor) relative to protein 1 (the transposase) were also analyzed. Relatively large amounts of protein 2 were required to see a significant decrease in the transposition frequency of an element. In addition, varying the co-ordinate synthesis of the IS50 R proteins over a 30-fold range had little effect on the transposition frequency. These studies suggest that neither the wild-type synthesis rate of protein 2 relative to protein 1 nor the amount of synthesis of both IS50 R proteins is the only factor responsible for controlling the transposition frequency of a wild-type Tn5 element in Escherichia coli.     

The IS1 elements in Shigella boydii: horizontal transfer,vertical inactivation and target duplication

IS1(SB) and its two variants were identified as the major and minor IS1 elements in Shigella boydii. The nucleotide sequences of IS1(SB), IS1(O157:H7) from Escherichia coli O157:H7 and IS1F from E. coli K12 suggest that these IS1 elements had been horizontally transferred among S. boydii and E. coli O157:H7 and K12. The two IS1(SB) variants and IS1(O157:H7) have transposition activities 7- to 86-fold less than that of IS1(SB), whereas IS1F has little transposition activity. Analysis of the flanking sequences of IS1(SB) and its two variants in S. boydii revealed the nature of regional specificity of the target sites and the sequence dependence of 8 and 9 bp target duplications, for which a model is presented.     

Characterization of in vitro constructed IS30-flanked transposons

In order to facilitate functional studies on the mobile genetic element IS30, a resident of the Escherichia coli chromosome, transposon structures with two copies of IS30 flanking the chloramphenicol-resistance gene cat were constructed in vitro. Transposons containing IS30 as direct repeats (Tn2700 and Tn2702) transpose from multicopy plasmids into the genome of phage P1-15, thus giving rise to special transduction for cat with frequencies between 10(-5) and 10(-8)/plaque-forming unit. In contrast, transposon structures with IS30 in inverted repeat (Tn2701 and Tn2703) showed no detectable (less than 10(-9] transposition activity in vivo. By restriction analysis, two insertion sites of Tn2700 and Tn2702 on the phage P1-15 genome were indistinguishable from those observed earlier with a single copy of the IS30 element. These two insertion sites were used several times independently by Tn2700 and Tn2702. This confirms the non-random target selection by the element and it indicates that transposition of Tn2700 and Tn2702 follows the same rules as that of IS30.     

Multiple copies of IS10 in the Enterobacter cloacae MD36 chromosome.

Repetitive sequences were isolated and characterized as double-stranded DNA fragments by treatment with S1 nuclease after denaturation and renaturation of the total DNA of Enterobacter cloacae MD36. One repetitive sequence was identical to the nucleotide sequence of IS10-right (IS10R), which is the active element in the plasmid-associated transposon Tn10. Unexpectedly, 15 copies of IS10R were found in the chromosomal DNA of E. cloacae MD36. One copy of the central region of Tn10 was found in the total DNA of E. cloacae MD36. IS10Rs in restriction fragments isolated from the E. cloacae MD36 total DNA showed 9-bp duplications adjacent to the terminal sequences that are characteristic of Tn10 transposition. This result suggests that many copies of IS10R in E. cloacae MD36 are due to transposition of IS10R alone, not due to transposition of Tn10 or to DNA rearrangement. I also found nine copies of IS10 in Shigella sonnei HH109, two and four copies in two different natural isolates of Escherichia coli, and two copies in E. coli K-12 strain JM109 from the 60 bacterial strains that were examined. All dam sites in the IS10s in E. cloacae MD36 and S. sonnei HH109 were methylated. Tn10 and IS10 transpose by a mechanism in which the element is excised from the donor site and inserted into the new target site without significant replication of the transposing segment; thus, the copy numbers of the elements in the cell are thought to be unchanged in most circumstances. Accumulation of IS10 copies in E. cloacae MD36 has interesting evolutionary implications.     

Distribution and Abundance of Insertion Sequences among Natural Isolates of Escherichia coli

A reference collection of 71 natural isolates of Escherichia coli (the ECOR collection) has been studied with respect to the distribution and abundance of transposable insertion sequences using DNA hybridization. The data include 1173 occurrences of six unrelated insertion sequences (IS1, IS2, IS3, IS4, IS5 and IS30). The number of insertion elements per strain, and the sizes of DNA restriction fragments containing them, is highly variable and can be used to discriminate even among closely related strains. The occurrence and abundance of pairs of unrelated insertion sequences are apparently statistically independent, but significant correlations result from stratifications in the reference collection. However, there is a highly significant positive association among the insertion sequences considered in the aggregate. Nine branching process models, which differ in assumptions regarding the regulation of transposition and the effect of copy number on fitness, have been evaluated with regard to their fit of the observed distributions. No single model fits all copy number distributions. The best models incorporate no regulation of transposition and a moderate to strong decrease in fitness with increasing copy number for IS1 and IS5, strong regulation of transposition and a negligible to weak decrease in fitness with increasing copy number for IS3, and less than strong regulation of transposition for IS2, IS4 and IS30.     

IS231A from Bacillus thuringiensis is functional in Escherichia coli: transposition and insertion specificity.

A kanamycin resistance gene was introduced within the insertion sequence IS231A from Bacillus thuringiensis, and transposition of the element was demonstrated in Escherichia coli. DNA sequencing at the target sites showed that IS231A transposition results in direct repeats of variable lengths (10, 11, and 12 bp). These target sequences resemble the terminal inverted repeats of the transposon Tn4430, which are the preferred natural insertion sites of IS231 in B. thuringiensis.     

IS1-mediated intramolecular rearrangements: formation of excised transposon circles and replicative deletions.

A system is described which permits visualization and analysis of a number of molecular species associated with transposition activity of the bacterial insertion sequence, IS1, in vivo. The technique involves induction of an IS1 transposase gene carried by a plasmid which also includes an IS1-based transposable element. It is, in principle, applicable to the identification of transposition intermediates as well as unstable transposition products and those which are not detectable by genetic means. Thirteen novel molecular species were detected after 4 h of induction. Five major species were characterized, based on their behaviour as a function of time, on their hybridization patterns and on the nucleotide sequences of the transposon-backbone junctions. All result from intramolecular IS1 transposition events. The two reciprocal partner products of IS1-mediated deletions, the intramolecular equivalent of co-integrates generated by intermolecular transposition, have been identified. Both carry a single copy of the transposable element and present complementary distributions of deletion endpoints. These results establish, by direct physical means, that adjacent IS1-mediated deletions are accompanied by duplication of the element. A second type of molecule identified was an excised circular copy of the transposon, raising the possibility that IS1 is capable of following an intermolecular transposition pathway, via excised transposon circles, leading to direct insertion.     

IS1397 is active for transposition into the chromosome of Escherichia coli K-12 and inserts specifically into palindromic units of bacterial interspersed mosaic elements

We demonstrate that IS1397, a putative mobile genetic element discovered in natural isolates of Escherichia coli, is active for transposition into the chromosome of E. coli K-12 and inserts specifically into palindromic units, also called repetitive extragenic palindromes, the basic element of bacterial interspersed mosaic elements (BIMEs), which are found in intergenic regions of enterobacteria closely related to E. coli and Salmonella. We could not detect transposition onto a plasmid carrying BIMEs. This unprecedented specificity of insertion into a well-characterized chromosomal intergenic repeated element and its evolutionary implications are discussed.     

Target specificity of insertion element IS30

The Escherichia coli resident mobile element IS 30 has pronounced target specificity. Upon transposition, the element frequently inserts exactly into the same position of a preferred target sequence. Insertion sites in phages, plasmids and in the genome of E. coli are characterized by an exceptionally long palindromic consensus sequence that provides strong specificity for IS 30 insertions, despite a relatively high level of degeneracy. This 24-bp-long region alone determines the attractiveness of the target DNA and the exact position of IS 30 insertion. The divergence of a target site from the consensus and the occurrence of 'non-permitted' bases in certain positions influence the target activity. Differences in attractiveness are emphasized if two targets are present in the same replicon, as was demonstrated by quantitative analysis. In a system of competitive targets, the oligonucleotide sequence representing the consensus of genomic IS 30 insertion sites proved to be the most efficient target. Having compared the known insertion sites, we suppose that IS 30 -like target specificity, which may represent an alternative strategy in target selection among mobile elements, is characteristic of the insertion sequences IS 3 , IS 6 and IS 21 , too.     

Spontaneous transposition in the bacteriophage lambda cro gene residing on a plasmid.

A new mutagenesis assay system based on the phage lambda cro repressor gene residing on a plasmid was developed. The assay detects mutations in cro that decrease the binding of the repressor to the OR operator in an OR PR-lacZ fusion present in a lambda prophage. Mutations arose spontaneously during growth of E. coli cells harboring cro plasmids at a frequency of 3-6 x 10(-6). Analysis of some 200 cro mutants from several 'wild-type' strains revealed a substantial fraction of 25-70% insertion events caused by transposition of IS elements. Most of the insertions were caused by IS1, but IS5 insertions were observed too. In strains harboring Tn10, IS10 was responsible for most insertions. Restriction nuclease digestion analysis revealed a preference for insertion of IS10 into the C-terminal half of cro, despite the absence of sequences which are known hot spots for Tn10 insertions. The frequency of IS1 insertions into cro decreased 25-60-fold and that of IS10 insertions decreased 200-fold in cells carrying the recA56 mutation, suggesting that RecA is involved in transposition of these elements. During the logarithmic phase of growth, the mutation frequency was constant for at least 22 generations; however, upon continuous incubation at the stationary phase, the mutation frequency gradually increased, yielding a 3-fold increase in the frequency of insertion and a 4-5-fold increase in point mutation. Genomic Southern analysis of chromosomal IS elements in cells which underwent a transposition from the chromosome into the cro plasmid revealed that the number and distribution of IS1 and IS5 were usually unaltered compared to cells which did not undergo a transposition event. In contrast, essentially each IS10 transposition was accompanied by multiple events which led to changes in the number and distribution of chromosomal IS10 elements.     

Terminal inverted repeats of insertion sequence IS30 serve as targets for transposition.

In the present study, we demonstrate that the terminal inverted repeats of the Escherichia coli insertion sequence IS30 are functional target sites for the transposition of the (IS30)2 dimer, which represents an intermediate structure in the transposition of IS30. Comparative analysis of various target regions revealed that the left and right ends differ in their "attractivity." In our experiments, the joined left and right ends, i.e., the (IS30)2 intermediate structure, was found to be the most preferred target. It was also shown that flanking sequences can influence the target activity of the terminal repeats. The functional part of the target region was localized in the inverted repeats by means of mutational analysis, and it corresponds to the binding site of IS30 transposase. Insertion of 1 bp into the right inverted repeat resulted in unusual target duplication accompanied by gene conversion. The choice of the terminal inverted repeats as targets in transposition leads to the reconstruction of the (IS30)2 structure, which may induce a cascade of further rearrangements. Therefore, this process can play a role in the evolution of the genome.     

Fis plays a role in Tn5 and IS50 transposition.

The Fis (factor for inversion stimulation) protein of Escherichia coli was found to influence the frequency of transposon Tn5 and insertion sequence IS50 transposition. Fis stimulated both Tn5 and IS50 transposition events and also inhibited IS50 transposition in Dam-bacteria. This influence was not due to regulation by Fis of the expression of the Tn5 transposition proteins. We localized, by DNase I footprinting, one Fis site overlapping the inside end of IS50 and give evidence to strongly suggest that when Fis binds to this site, IS50 transposition is inhibited. The Fis site at the inside end overlaps three Dam GATC sites, and Fis bound efficiently only to the unmethylated substrate. Using a mobility shift assay, we also identified another potential Fis site within IS50. Given the growth phase-dependent expression of Fis and its differential effect on Tn5 versus IS50 transposition in Dam-bacteria, we propose that the high levels of Fis present during exponential growth stimulate transposition events and might bias those events toward Tn5 and away from IS50 transposition.     

UV light induces IS10 transposition in Escherichia coli.

A new mutagenesis assay system based on the phage 434 cI gene carried on a low-copy number plasmid was used to investigate the effect of UV light on intermolecular transposition of IS10. Inactivation of the target gene by IS10 insertion was detected by the expression of the tet gene from the phage 434 PR promoter, followed by Southern blot analysis of plasmids isolated from TetR colonies. UV irradiation of cells harboring the target plasmid and a donor plasmid carrying an IS10 element led to an increase of up to 28-fold in IS10 transposition. Each UV-induced transposition of IS10 was accompanied by fusion of the donor and acceptor plasmid into a cointegrate structure, due to coupled homologous recombination at the insertion site, similar to the situation in spontaneous IS10 transposition. UV radiation also induced transposition of IS10 from the chromosome to the target plasmid, leading almost exclusively to the integration of the target plasmid into the chromosome. UV induction of IS10 transposition did not depend on the umuC and uvrA gene product, but it was not observed in lexA3 and DeltarecA strains, indicating that the SOS stress response is involved in regulating UV-induced transposition. IS10 transposition, known to increase the fitness of Escherichia coli, may have been recruited under the SOS response to assist in increasing cell survival under hostile environmental conditions. To our knowledge, this is the first report on the induction of transposition by a DNA-damaging agent and the SOS stress response in bacteria.     

Biochemical and genetic variation in Mycoplasma fermentans strains from cell line, human and animal sources

Aims:  To investigate the inter-strain variation in (i) substrate utilization and (ii) the restriction fragment length polymorphism (RFLP) pattern based on the distribution of an insertion element (IS 1550 ) in Mycoplasma fermentans strains, and to establish any correlation between subgroups within the species and their source or habitat.
Methods and Results:  Using a sensitive dynamic pH method, the pattern and kinetics of substrate utilization by a panel of 17 M. fermentans strains from various sources was determined. This study correlated the biochemical characteristics of these strains with RFLP patterns based on the distribution of an insertion sequence (IS 1550 ) with the sources of the strains. The test isolates were divided into four major groups according to the pattern of substrates metabolized. Interestingly, two strains isolated from cell lines in RFLP cluster I failed to utilize arginine. Ovine strains showed distinct substrate utilization patterns and produced RFLP patterns not previously encountered.
Conclusions:  All strains utilized glucose, but the ability to utilize arginine, fructose and N -acetyl glucosamine varied. There was also some correlation evident between the metabolic data and the RFLP clusters.
Significance and Impact of the Study:  This study has provided a better understanding of the biochemical and genetic diversity of M. fermentans strains from various sources.     

Cloning and sequencing of IS1086, an Alcaligenes eutrophus insertion element related to IS30 and IS4351.

A new insertion sequence (IS), designated IS1086, was isolated from Alcaligenes eutrophus CH34 by being trapped in plasmid pJV240, which contains the Bacillus subtilis sacB and sacR genes. The 1,106-bp IS1086 element contains partially matched (22 of 28 bp) terminal-inverted repeats and a long open reading frame. Hybridization data suggest the presence of one copy of IS1086 in the strain CH34 heavy-metal resistance plasmid pMOL28 and at least two copies in its chromosome. Analysis of the IS1086 nucleotide sequence revealed striking homology with two other IS elements, IS30 and IS4351, suggesting that they are three close members in a family of phylogenetically related insertion sequences. One open reading frame of the Spiroplasma citri phage SpV1-R8A2 B was also found to be related to this IS family but to a lesser extent. Comparison of the G+C contents of IS30 and IS1086 revealed that they conform to their respective hosts (46 versus 50% for IS30 and Escherichia coli and 64.5% for IS1086 and A. eutrophus). The pressure on the AT/GC ratio led to a very different codon usage in these two closely related IS elements. Results suggesting that IS1086 transposition might be activated by some forms of stress are discussed.     

Linker insertion mutagenesis based on IS21 transposition: isolation of an AMP-insensitive variant of catabolic ornithine carbamoyltransferase from Pseudomonas aeruginosa

The bacterial insertion sequence IS21 when repeated in tandem efficiently promotes non-replicative cointegrate formation in Escherichia coli. An IS21-IS21 junction region which had been engineered to contain unique SalI and BglII sites close to the IS21 termini was not affected in the ability to form cointegrates with target plasmids. Based on this finding, a novel procedure of random linker insertion mutagenesis was devised. Suicide plasmids containing the engineered junction region (pME5 and pME6) formed cointegrates with target plasmids in an E.coli host strain expressing the IS21 transposition proteins in trans. Cointegrates were resolved in vitro by restriction with SalI or BglII and ligation; thus, insertions of four or 11 codons, respectively, were created in the target DNA, practically at random. The cloned Pseudomonas aeruginosa arcB gene encoding catabolic ornithine carbamoyltransferase was used as a target. Of 20 different four-codon insertions in arcB, 11 inactivated the enzyme. Among the remaining nine insertion mutants which retained enzyme activity, three enzyme variants had reduced affinity for the substrate ornithine and one had lost recognition of the allosteric activator AMP. The linker insertions obtained illustrate the usefulness of the method in the analysis of structure-function relationships of proteins.     

Structure and stability of transposon 5-mediated cointegrates

We have determined the structure of a set of independently derived, Tn5-mediated cointegrates and examined the stability of several examples. A variety of cointegrate structures was found, including those mediated by the entire compound transposon, and those mediated by a single flanking IS50 element, which was always IS50-R, and never IS50-L. IS50-R but not IS50-L is reported to code for a protein(s) required for transposition. This finding confirms that IS50-L is relatively inactive and suggests that the active transposition protein(s) acts largely in cis on IS50-R. Another class of cointegrate was created by inverse transposition of Tn5 (using the inside ends of the flanking elements). In addition, we found an unexpectedly large set of cointegrates, in which the joint between the two plasmids was not adjacent to the transposon. All cointegrates analysed were found to be stable. This suggests that Tn5, unlike the transposon Tn3, does not transpose via an obligate cointegrate intermediate. This finding is compared to previous results with Tn5 and Tn9, and is discussed in terms of current models of transposition.