Metabolic engineering of acetoin and meso-2, 3-butanediol biosynthesis in E. coli

The functional reconstruction of acetoin and meso-2,3-butanediol (meso-2,3-BD) biosynthetic pathways in Escherichia coli have been explored systematically. Pathway construction involved the in vsivo screening of prospective pathway isozymes of yeast and bacterial origin. After substantial engineering of the host background to increase pyruvate availability, E. coli YYC202(DE3) ldhA⁽ ilvC( expressing ilvBN from E. coli and aldB from L. lactis (encoding acetolactate synthase and acetolactate decarboxylase activities, respectively) was able to produce up to 870 mg/L acetoin, with no coproduction of diacetyl observed. These strains were also found to produce small quantities of meso-2,3-BD, suggesting the existence of endogenous 2,3-BD dehydrogenase activity. Finally, the coexpression of bdh1 from S. cerevisiae, encoding 2,3-BD dehydrogenase, in this strain resulted in the production of up to 1120 mg/L meso-2,3-BD, with glucose a yield of 0.29 g/g. While disruption of the native lactate biosynthesis pathway increased pyruvate precursor availability to this strain, increased availability of NADH for acetoin reduction to meso-2,3-BD was found to be the most important consequence of ldhA deletion.     

Establishment of a novel gene expression method,BICES (biomass-inducible chromosome-based expression system), and its application to the production of 2,3-butanediol and acetoin

In this study, we describe a novel method for producing valuable chemicals from glucose and xylose in Escherichia coli. The notable features in our method are avoidance of plasmids and expensive inducers for foreign gene expression to reduce production costs; foreign genes are knocked into the chromosome, and their expression is induced with xylose that is present in most biomass feedstock. As loci for the gene knock-in, lacZYA and some pseudogenes are chosen to minimize unexpected effects of the knock-in on cell physiology. The promoter of xylF is inducible with xylose and is combined with the T7 RNA polymerase–T7 promoter system to ensure strong gene expression. This expression system was named BICES (biomass-inducible chromosome-based expression system). As examples of BICES application, 2,3-butanediol and acetoin were successfully produced from glucose and xylose, and the maximal concentrations reached 54 g L⁻¹ [99.6% in (R,S)-form] and 31 g L⁻¹, respectively. 2,3-Butanediol and acetoin are industrially important chemicals that are, at present, produced primarily through petrochemical processes. To demonstrate usability of BICES in practical situations, we produced these chemicals from a saccharified cedar solution. From these results, we can conclude that BICES is suitable for practical production of valuable chemicals from biomass.     

Advances in 2-phenylethanol production from engineered microorganisms

2-Phenylethanol (2-PE) is an important flavor ingredient with a rose-like odor. Due to concerns about the toxic byproducts potentially found in 2-PE from chemical synthesis, consumers prefer the natural aroma compound, promoting the biosynthesis of 2-PE. Various microorganisms produce 2-PE naturally with low yield. Recent metabolic engineering strategies in yeasts and Escherichia coli have achieved great success in improving 2-PE bioproduction, including the alleviation of feed-back inhibition, improvement of precursor transport, enhancing activities of crucial enzymes, and reduction of by-products. Here, we review the metabolic engineering strategies applied to microorganisms for increasing bioproduction of 2-PE, address current problems, and propose further improvements.     

Engineering Cupriavidus necator H16 for the autotrophic production of (R)-1,3-butanediol

Butanediols are widely used in the synthesis of polymers, specialty chemicals and important chemical intermediates. Optically pure R-form of 1,3-butanediol (1,3-BDO) is required for the synthesis of several industrial compounds and as a key intermediate of β-lactam antibiotic production. The (R)-1,3-BDO can only be produced by application of a biocatalytic process. Cupriavidus necator H16 is an established production host for biosynthesis of biodegradable polymer poly-3-hydroxybutryate (PHB) via acetyl-CoA intermediate. Therefore, the utilisation of acetyl-CoA or its upstream precursors offers a promising strategy for engineering biosynthesis of value-added products such as (R)-1,3-BDO in this bacterium. Notably, C. necator H16 is known for its natural capacity to fix carbon dioxide (CO₂) using hydrogen as an electron donor. Here, we report engineering of this facultative lithoautotrophic bacterium for heterotrophic and autotrophic production of (R)-1,3-BDO. Implementation of (R)-3-hydroxybutyraldehyde-CoA- and pyruvate-dependent biosynthetic pathways in combination with abolishing PHB biosynthesis and reducing flux through the tricarboxylic acid cycle enabled to engineer strain, which produced 2.97 g/L of (R)-1,3-BDO and achieved production rate of nearly 0.4 Cmol Cmol⁻¹ h⁻¹ autotrophically. This is first report of (R)-1,3-BDO production from CO₂.     

Medium chain carboxylic acids production from waste biomass: Current advances and perspectives

Alternative chemicals to diverse fossil-fuel-based products is urgently needed to mitigate the adverse impacts of fossil fuel depletion on human development. To this end, researchers have focused on the production of biochemical from readily available and affordable waste biomass. This is consistent with current guidelines for sustainable development and provides great advantages related to economy and environment. The search for suitable biochemical products is in progress worldwide. Therefore, this review recommends a biochemical (i.e., medium chain carboxylic acids (MCCAs)) utilizing an emerging biotechnological production platform called the chain elongation (CE) process. This work covers comprehensive introduction of the CE mechanism, functional microbes, available feedstock types and corresponding utilization strategies, major methods to enhance the performance of MCCAs production, and the challenges that need to be addressed for practical application. This work is expected to provide a thorough understanding of the CE technology, to guide and inspire researchers to solve existing problems in depth, and motivate large-scale MCCAs production.     

Recent advances in biological production of 3-hydroxypropionic acid

3-Hydroxypropionic acid (3-HP) is a valuable platform chemical that can be produced biologically from glucose or glycerol. This review article provides an overview and the current status of microbial 3-HP production. The constraints of microbial 3-HP production and possible solutions are also described. Finally, future prospects of biological 3-HP production are discussed.     

利用嗜盐菌Salinivibrio YS生产2,3-丁二醇和琥珀酸

以从新疆艾丁湖采集的土样中分离出的中度嗜盐菌Salinivibrio YS为研究对象,利用该菌在厌氧条件下生产2,3-丁二醇和琥珀酸,在单因素摇瓶实验基础上,确定影响产物积累的各因素及其相应条件,再利用正交试验确定这些参数的最佳水平,即温度33℃,起始pH为8.0,发酵过程pH为7.0,乙酸添加量为3 g/L,NaCl浓度为l0 g/L.利用优化条件进行3L体系的发酵放大实验,经过108 h的无氧发酵,2,3-丁二醇的产量可达35.05 g/L,而琥珀酸的含量则高达22.46 g/L,且其糖的总转化率高达约50％.首次利用嗜盐菌在厌氧条件下生产2,3-丁二醇和琥珀酸,拓展了嗜盐菌的应用,同时也为生产2,3-丁二醇和琥珀酸提供了新的思路.     

Engineering of filamentous fungi for efficient conversion of lignocellulose: Tools,recent advances and prospects

Filamentous fungi, as the main producers of lignocellulolytic enzymes in industry, need to be engineered to improve the economy of large-scale lignocellulose conversion. Investigation of the cellular processes involved in lignocellulolytic enzyme production, as well as optimization of enzyme mixtures for higher hydrolysis efficiency, have provided effective targets for the engineering of lignocellulolytic fungi. Recently, the development of efficient genetic manipulation systems in several lignocellulolytic fungi opens up the possibility of systems engineering of these strains. Here, we review the recent progresses made in the engineering of lignocellulolytic fungi and highlight the research gaps in this area.     

Metabolic engineering of a Saccharomyces cerevisiae strain capable of simultaneously utilizing glucose and galactose to produce enantiopure (2R,3R)-butanediol

2,3-Butanediol (BDO) is an important chemical with broad industrial applications and can be naturally produced by many bacteria at high levels. However, the pathogenicity of these native producers is a major obstacle for large scale production. Here we report the engineering of an industrially friendly host, Saccharomyces cerevisiae, to produce BDO at high titer and yield. By inactivation of pyruvate decarboxylases (PDCs) followed by overexpression of MTH1 and adaptive evolution, the resultant yeast grew on glucose as the sole carbon source with ethanol production completely eliminated. Moreover, the pdc- strain consumed glucose and galactose simultaneously, which to our knowledge is unprecedented in S. cerevisiae strains. Subsequent introduction of a BDO biosynthetic pathway consisting of the cytosolic acetolactate synthase (cytoILV2), Bacillus subtilis acetolactate decarboxylase (BsAlsD), and the endogenous butanediol dehydrogenase (BDH1) resulted in the production of enantiopure (2R,3R)-butanediol (R-BDO). In shake flask fermentation, a yield over 70% of the theoretical value was achieved. Using fed-batch fermentation, more than 100 g/L R-BDO (1100 mM) was synthesized from a mixture of glucose and galactose, two major carbohydrate components in red algae. The high titer and yield of the enantiopure R-BDO produced as well as the ability to co-ferment glucose and galactose make our engineered yeast strain a superior host for cost-effective production of bio-based BDO from renewable resources.     

Production of (2S,3S)-2,3-butanediol and (3S)-acetoin from glucose using resting cells of Klebsiella pneumonia and Bacillus subtilis

Production of highly pure (2S,3S)-2,3-butanediol ((2S,3S)-2,3-BD) and (3S)-acetoin ((3S)-AC) in high concentrations is desirable but difficult to achieve. In the present study, glucose was first transformed to a mixture of (2S,3S)-2,3-BD and meso-2,3-BD by resting cells of Klebsiella pneumoniae CICC 10011, followed by biocatalytic resolution of the mixture by resting cells of Bacillus subtilis 168. meso-2,3-BD was transformed to (3S)-AC, leaving (2S,3S)-2,3-BD in the reaction medium. Using this approach, 12.5 g l(-1) (2S,3S)-2,3-BD and 56.7 g l(-1) (3S)-AC were produced. Stereoisomeric purity of (2S,3S)-2,3-BD and enantiomeric excess of (3S)-AC was 96.9 and 96.2%, respectively.     

Impact of pH and butyric acid on butanol production during batch fermentation using a new local isolate of Clostridium acetobutylicum YM1

The effect of pH and butyric acid supplementation on the production of butanol by a new local isolate of Clostridium acetobutylicum YM1 during batch culture fermentation was investigated. The results showed that pH had a significant effect on bacterial growth and butanol yield and productivity. The optimal initial pH that maximized butanol production was pH 6.0 ± 0.2. Controlled pH was found to be unsuitable for butanol production in strain YM1, while the uncontrolled pH condition with an initial pH of 6.0 ± 0.2 was suitable for bacterial growth, butanol yield and productivity. The maximum butanol concentration of 13.5 ± 1.42 g/L was obtained from cultures grown under the uncontrolled pH condition, resulting in a butanol yield (Y_P/S) and productivity of 0.27 g/g and 0.188 g/L h, respectively. Supplementation of the pH-controlled cultures with 4.0 g/L butyric acid did not improve butanol production; however, supplementation of the uncontrolled pH cultures resulted in high butanol concentrations, yield and productivity (16.50 ± 0.8 g/L, 0.345 g/g and 0.163 g/L h, respectively). pH influenced the activity of NADH-dependent butanol dehydrogenase, with the highest activity obtained under the uncontrolled pH condition. This study revealed that pH is a very important factor in butanol fermentation by C. acetobutylicum YM1.     

Synthesis,biological evaluation and molecular modeling of novel selective COX-2 inhibitors: sulfide,sulfoxide, and sulfone derivatives of 1,5-diarylpyrrol-3-substituted scaffold

A novel series of 1,5-diarylpyrrol-3-sulfur derivatives (10–12) was synthesized and characterized by NMR and mass spectroscopy and x-ray diffraction. The biological activity of these compounds was evaluated in in vitro and in vivo tests to assess their COX-2 inhibitory activity along with anti-inflammatory and antinociceptive effect.Results showed that the bioisosteric transformation of previously reported alkoxyethyl ethers (9a-c) into the corresponding alkyl thioethers (10a-c) still leads to selective and active compounds being the COX-2 inhibitory activity for most of them in the low nanomolar range. The oxidation products of 10a,b were also investigated and both couple of sulfoxides (11a,b) and sulfones (12a,b) showed an appreciable COX-2 inhibitory activity. Molecular modeling studies were performed to investigate the binding mode of the representative compounds 10b, 11b, and 12b into COX-2 enzyme and to explore the potential site of metabolism of 10a and 10b due to the different in vivo efficacy. Among the developed compounds, compound 10b showed a significant in vivo anti-inflammatory and antinociceptive activity paving the way to develop novel anti-inflammatory drugs.     

High-level production of 3-hydroxypropionic acid from glycerol as a sole carbon source using metabolically engineered Escherichia coli

As climate change is an important environmental issue, the conventional petrochemical-based processes to produce valuable chemicals are being shifted toward eco-friendly biological-based processes. In this study, 3-hydroxypropionic acid (3-HP), an industrially important three carbon (C3) chemical, was overproduced by metabolically engineered Escherichia coli using glycerol as a sole carbon source. As the first step to construct a glycerol-dependent 3-HP biosynthetic pathway, the dhaB1234 and gdrAB genes from Klebsiella pneumoniae encoding glycerol dehydratase and glycerol reactivase, respectively, were introduced into E. coli to convert glycerol into 3-hydroxypropionaldehyde (3-HPA). In addition, the ydcW gene from K. pneumoniae encoding γ-aminobutyraldehyde dehydrogenase, among five aldehyde dehydrogenases examined, was selected to further convert 3-HPA to 3-HP. Increasing the expression level of the ydcW gene enhanced 3-HP production titer and reduced 1,3-propanediol production. To enhance 3-HP production, fed-batch fermentation conditions were optimized by controlling dissolved oxygen (DO) level and employing different feeding strategies including intermittent feeding, pH-stat feeding, and continuous feeding strategies. Fed-batch culture of the final engineered E. coli strain with DO control and continuous feeding strategy produced 76.2 g/L of 3-HP with the yield and productivity of 0.457 g/g glycerol and 1.89 g·L⁻¹·h⁻¹, respectively. To the best of our knowledge, this is the highest 3-HP productivity achieved by any microorganism reported to date.     

D194G突变对meso-2,3-丁二醇脱氢酶催化特性的影响

目的:比较来源于Enterobacter aerogenes CICC10293和Bacillus subtilis的meso-2,3-丁二醇脱氢酶(E. a-BDH和D194G B. s-BDH)活性和动力学参数,分析D194氨基酸对BDH催化特性的影响。方法:利用E. coli BL21(DE3)原核表达E. a-BDH和D194G B. s-BDH,经HiTrap Q FF阴离子交换柱和Superdex 75凝胶柱纯化后,用MALDI-TOF MS确定其分子质量;检测NADH/NAD⁺氧化还原的吸光度变化确定BDH活性、辅酶和底物的特异性、最适pH、温度及动力学参数。结果:重组表达E. a-BDH和D194G B. s-BDH是同源四聚体蛋白,基因序列有两处碱基不同(g.27A/T和g.581A/G),其中g.581A/G导致BDH的一处氨基酸发生改变(p.D194G)。D194G B. s-BDH的活性约为E. a-BDH的2.3%,并且丧失了氧化meso-2,3-丁二醇的能力。二者均以乙偶姻/NADH为最适底物,但D194G B. s-BDH的K_m是E. a-BDH的5.63倍。结论:D194G氨基酸突变降低了BDH的活性。     

Continuous production of chiral 1,3-butanediol using immobilized biocatalysts in a packed bed reactor: promising biocatalysis method with an asymmetric hydrogen-transfer bioreduction

An asymmetric hydrogen-transfer biocatalyst consisting of mutated Rhodococcus phenylacetaldehyde reductase (PAR) or Leifsonia alcohol dehydrogenase (LSADH) was applied for some water-soluble ketone substrates. Among them, 4-hydroxy-2-butanone was reduced to (S)/(R)-1,3-butanediol, a useful intermediate for pharmaceuticals, with a high yield and stereoselectivity. Intact Escherichia coli cells overexpressing mutated PAR (Sar268) or LSADH were directly immobilized with polyethyleneimine or 1,6-diaminehexane and glutaraldehyde and evaluated in a batch reaction. This system produced (S)-1,3-butanediol [87% enantiomeric excess (e.e.)] with a space time yield (STY) of 12.5 mg h⁻¹ ml⁻¹ catalyst or (R)-1,3-butanediol (99% e.e.) with an STY of 60.3 mg h⁻¹ ml⁻¹ catalyst, respectively. The immobilized cells in a packed bed reactor continuously produced (R)-1,3-butanediol with a yield of 99% (about 49.5 g/l) from 5% (w/v) 4-hydroxy-2-butanoate over 500 h.     

Peptide derivatives as inhibitors of NS2B-NS3 protease from Dengue,West Nile,and Zika flaviviruses

Currently, more than 70 flaviviruses were identified and reported in the literature, whose Dengue (DENV), Zika (ZIKV), and West Nile (WNV) viruses have been responsible for millions of cases of infections worldwide, mainly in developing countries. These viruses are transmitted by the bite of mosquitoes from genus Aedes, or Culex and, in some cases, Stegomyia. Despite numerous efforts to identify a selective, safe, and effective antiviral agent, there is no currently approved drug for the treatment of flaviviral infections. Then, current pharmacological therapy has the objective to treat the clinical symptoms. Various peptidomimetics and peptide-derivatives have been synthesized and evaluated against several biological targets from flaviviruses with different applications, such as diagnosis, E protein inhibitors, entry inhibitors, virucidal inhibitors, and also viral replication inhibitors. Flaviviral replication depends on the NS3^pro that is completely activated when it is complexed to its cofactor, NS2B; forming a viral enzymatic complex. The development of NS2B-NS3^pro inhibitors is considered a challenging work due to its active site is shallow and open-pocket. In this work, we report all advances involving peptidomimetics, peptide-derived, and peptide-hybrids found in the literature. In sense, we discuss the influence of different functional groups in the activity and selectivity. Moreover, the first inhibitors reported in the literature as covalent ligands, comprising two basic residues followed by an electrophilic moiety that binds to the catalytic serine (Ser¹³⁵–O^?) are also discussed in details, such as trifluoromethyl ketones, aldehydes, and boronic acids. Furthermore, it is presented the influence of introducing transition metals, providing metallopeptide inhibitors; and cyclization of linear peptides, generating cyclic and macrocyclic peptide inhibitors. Finally, we provide the most accurate state of the art found in the literature, which can be utilized to design new and effective antiviral agents.     

Characterization of (2S,2'R,3'R)-2-(2',3'-[3H]-Dicarboxycyclopropyl)glycine Binding in Rat Brain

Abstract: [(2S,2′R,3′R)-2-(2′,3′-[³H]Dicarboxycyclopropyl)glycine ([³H]DCG IV) binding was characterized in vitro in rat brain cortex homogenates and rat brain sections. In cortex homogenates, the binding was saturable and the saturation isotherm indicated the presence of a single binding site with a K_D value of 180 ± 33 nM and a B_max of 780 ± 70 fmol/mg of protein. The nonspecific binding, measured using 100 µM LY354740, was <30%. NMDA, AMPA, kainate, l (?)-threo-3-hydroxyaspartic acid, and (S)-3,5-dihydroxyphenylglycine were all inactive in [³H]DCG IV binding up to 1 mM. However, several compounds inhibited [³H]DCG IV binding in a concentration-dependent manner with the following rank order of potency: LY341495 = LY354740 > DCG IV = (2S,1′S,2′S)-2-(2-carboxycyclopropyl)glycine > (1S,3R)-1-aminocyclopentane-1,3-dicarboxylic acid > (2S,1′S,2′S)-2-methyl-2-(2-carboxycyclopropyl)glycine > l -glutamate = ibotenate > quisqualate > (RS)-α-methyl-4-phosphonophenylglycine = l (+)-2-amino-3-phosphonopropionic acid > (S)-α-methyl-4-carboxyphenylglycine > (2S)-α-ethylglutamic acid > l (+)-2-amino-4-phosphonobutyric acid. N-Acetyl-l -aspartyl-l -glutamic acid inhibited the binding in a biphasic manner with an IC₅₀ of 0.2 µM for the high-affinity component. The binding was also affected by GTPγS, reducing agents, and CdCl₂. In parasagittal sections of rat brain, a high density of specific binding was observed in the accessory olfactory bulb, cortical regions (layers 1, 3, and 4 > 2, 5, and 6), caudate putamen, molecular layers of the hippocampus and dentate gyrus, subiculum, presubiculum, retrosplenial cortex, anteroventral thalamic nuclei, and cerebellar granular layer, reflecting its preferential (perhaps not exclusive) affinity for pre- and postsynaptic metabotropic glutamate mGlu2 receptors. Thus, the pharmacology, tissue distribution, and sensitivity to GTPγS show that [³H]DCG IV binding is probably to group II metabotropic glutamate receptors in rat brain.     

Integrated use of plant residues,phosphorus and beneficial microbes improve hybrid maize productivity in semiarid climates

Phosphorus unavailability and lack of organic matter in calcareous soils under semiarid climates are the major reasons for low crop productivity. A field experiment was conducted at The Agronomy Research Farm of The University of Agriculture Peshawar (semiarid climate), during summer 2015. The objective of the research was to investigate the effect of plant residues, organic and inorganic phosphorus management on improving yield and yield components of hybrid maize (CS-200) with (+) and without (?) phosphate solubilizing bacteria. The experiment was laid out in randomized complete block design with split plot arrangement, using three replications. A combination of plant residues and phosphorus sources were used as mainplot factor, and phosphate solubilizing bacteria were used as a subplot factor. The results revealed that plant residues, phosphorus sources and phosphate solubilizing bacteria significantly affected all parameters under study except number of plants at harvest. Application of legume residues (Faba bean) increased ear length (22.9 cm), grains row^?1 (46) and ear^?1 (419), 1000 grains weight (365 g), grain yield (6175 kg ha^?1) and shelling percentage (83) as compared to paper mulberry and garlic residues. Phosphorus application at the higher rate of 120 kg ha^?1 from inorganic source (single super phosphate) was superior in terms of higher ear length (24.4 cm), number of grains row^?1 (48) and ear^?1 (455), 1000 grains weight (380 g), grain yield (6558 kg ha^?1), harvest index (42.7%) and shelling percentage (83%) than the lower rate of phosphorus (60 kg P ha^?1). Inoculation of maize seeds with beneficial microbes (phosphate solubilizing bacteria) significantly increased ear length (22.9 cm), number of grains row^?1 (45) and ear^?1 (413), 1000 grains weight (364 g), grain yield (6237 kg ha^?1), harvest index (41.8%) and shelling percentage (82) than without seed inoculation. On the basis of our results from this study, we concluded that application of faba bean residues, 120 kg P ha^?1 as single super phosphate along with seed inoculation with phosphate solubilizing bacteria could improve yield and yield components of hybrid maize under semiarid climates.     

Production of fuels and chemicals from renewable resources using engineered Escherichia coli

Biotechnological production of fuels and chemicals from renewable resources is an appealing way to move from the current petroleum-based economy to a biomass-based green economy. Recently, the feedstocks that can be used for bioconversion or fermentation have been expanded to plant biomass, microbial biomass, and industrial waste. Several microbes have been engineered to produce chemicals from renewable resources, among which Escherichia coli is one of the best studied. Much effort has been made to engineer E. coli to produce fuels and chemicals from different renewable resources. In this paper, we focused on E. coli and systematically reviewed a range of fuels and chemicals that can be produced from renewable resources by engineered E. coli. Moreover, we proposed how can we further improve the efficiency for utilizing renewable resources by engineered E. coli, and how can we engineer E. coli for utilizing alternative renewable feedstocks. e.g. C1 gases and methanol. This review will help the readers better understand the current progress in this field and provide insights for further metabolic engineering efforts in E. coli.