Heterogeneous Catalysts with Well‐Defined Active Metal Sites toward CO2 Electrocatalytic Reduction

The global atmospheric CO₂ concentration reached 147% of pre‐industrial levels in 2019, and is still increasing with an accelerated rate. A series of methods have been developed to convert CO₂ to other non‐greenhouse molecules. Elelctrocatalytic CO₂ reduction reaction (CO2RR) is one of the promising methods, since it could support renewable energy. Optimizing the CO2RR system requires finding highly efficient catalysts, as well as electrolysis systems. In this essay, the development of promising heterogeneous catalysts with well‐defined active metal sites is discussed. These catalysts could be prepared by immobilizing metal cations onto chemically well‐defined substrates, such as metal‐organic frameworks, covalent‐organic frameworks, polyoxometalates, or immobilizing well‐defined molecular catalysts on conducting substrates. A clear perspective on the catalyst's structures contributes to the understanding of structure‐reactivity correlations, which could, in turn, shed light on designing better catalysts. Some methods to assist the electrocatalysis process, such as coupling with solar or heat energy, are also briefly discussed.     

Edge‐Exposed Molybdenum Disulfide with N‐Doped Carbon Hybridization: A Hierarchical Hollow Electrocatalyst for Carbon Dioxide Reduction

Electrochemical CO₂ reduction (CO₂RR) is a promising technology to produce value‐added fuels and weaken the greenhouse effect. Plenty of efforts are devoted to exploring high‐efficiency electrocatalysts to tackle the issues that show poor intrinsic activity, low selectivity for target products, and short‐lived durability. Herein, density functional theory calculations are firstly utilized to demonstrate guidelines for design principles of electrocatalyst, maximum exposure of catalytic active sites for MoS₂ edges, and electron transfer from N‐doped carbon (NC) to MoS₂ edges. Based on the guidelines, a hierarchical hollow electrocatalyst comprised of edge‐exposed 2H MoS₂ hybridized with NC for CO₂RR is constructed. In situ atomic‐scale observation for catalyst growth is performed by using a specialized Si/SiN_x nanochip at a continuous temperature‐rise period, which reveals the growth mechanism. Abundant exposed edges of MoS₂ provide a large quantity of active centers, which leads to a low onset potential of ≈40 mV and a remarkable CO production rate of 34.31 mA cm^?2 with 92.68% of Faradaic efficiency at an overpotential of 590 mV. The long‐term stability shows negligible degradation for more than 24 h. This work provides fascinating insights into the construction of catalysts for efficient CO₂RR.     

Uncovering Atomic‐Scale Stability and Reactivity in Engineered Zinc Oxide Electrocatalysts for Controllable Syngas Production

In this study, scalable, flame spray synthesis is utilized to develop defective ZnO nanomaterials for the concurrent generation of H₂ and CO during electrochemical CO₂ reduction reactions (CO₂RR). The designed ZnO achieves an H₂/CO ratio of ≈1 with a large current density (j) of 40 mA cm^?2 during long‐term continuous reaction at a cell voltage of 2.6 V. Through in situ atomic pair distribution function analysis, the remarkable stability of these ZnO structures is explored, addressing the knowledge gap in understanding the dynamics of oxide catalysts during CO₂RR. Through optimization of synthesis conditions, ZnO facets are modulated which are shown to affect reaction selectivity, in agreement with theoretical calculations. These findings and insights on synthetic manipulation of active sites in defective metal‐oxides can be used as guidelines to develop active catalysts for syngas production for renewable power‐to‐X to generate a range of fuels and chemicals.     

Carbon Solving Carbon's Problems: Recent Progress of Nanostructured Carbon‐Based Catalysts for the Electrochemical Reduction of CO2

The electrochemical reduction of CO₂ to useful molecules offers an elegant technological solution to current energy security and sustainability issues because it sequesters carbon from the atmosphere, provides an energy storage solution for intermittent renewable sources, and can be used to produce fuels and industrial chemicals. Nanostructured carbon materials have been extensively used to catalyse some key electrochemical processes because of their excellent electrical conductivity, chemical stability, and abundant active sites. This progress report focuses on nanostructured carbon materials, namely graphene materials, carbon nanotubes, porphyrin materials, nanodiamond, and glassy carbon, which have recently shown promise as high performing CO₂ reduction electrocatalysts and supports. Along with discussion regarding materials synthesis, structural characterisation, and electrochemical performance characterisation techniques used, this report will discuss the findings of recent computational CO₂RR studies which have been key to elucidating active sites and reaction mechanisms, and developing strategies to break conventional scaling relationships. Lastly, challenges and future perspective of these carbon‐based materials for CO₂ reduction applications will be given. Much work is still required to realise the commercial viability of the technology, but advanced experimental techniques coupled with theoretical calculations are expected to facilitate future development of the technology.     

Atomic‐Level Reactive Sites for Semiconductor‐Based Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction is an effective means to generate renewable energy. It involves redox reactions, reduction of CO₂ and oxidation of water, that leads to the production of solar fuel. Significant research effort has therefore been made to develop inexpensive and practically sustainable semiconductor‐based photocatalysts. The exploration of atomic‐level active sites on the surface of semiconductors can result in an improved understanding of the mechanism of CO₂ photoreduction. This can be applied to the design and synthesis of efficient photocatalysts. In this review, atomic‐level reactive sites are classified into four types: vacancies, single atoms, surface functional groups, and frustrated Lewis pairs (FLPs). These different photocatalytic reactive sites are shown to have varied affinity to reactants, intermediates, and products. This changes pathways for CO₂ reduction and significantly impacts catalytic activity and selectivity. The design of a photocatalyst from an atomic‐level perspective can therefore be used to maximize atomic utilization efficiency and lead to a high selectivity. The prospects for fabrication of effective photocatalysts based on an in‐depth understanding are highlighted.     

Activation of Ni Particles into Single Ni–N Atoms for Efficient Electrochemical Reduction of CO2

Electrochemical reduction of carbon dioxide (CO₂) to fuels and value‐added industrial chemicals is a promising strategy for keeping a healthy balance between energy supply and net carbon emissions. Here, the facile transformation of residual Ni particle catalysts in carbon nanotubes into thermally stable single Ni atoms with a possible NiN₃ moiety is reported, surrounded with a porous N‐doped carbon sheath through a one‐step nanoconfined pyrolysis strategy. These structural changes are confirmed by X‐ray absorption fine structure analysis and density functional theory (DFT) calculations. The dispersed Ni single atoms facilitate highly efficient electrocatalytic CO₂ reduction at low overpotentials to yield CO, providing a CO faradaic efficiency exceeding 90%, turnover frequency approaching 12 000 h^?1, and metal mass activity reaching about 10 600 mA mg^?1, outperforming current state‐of‐the‐art single atom catalysts for CO₂ reduction to CO. DFT calculations suggest that the Ni@N₃ (pyrrolic) site favors *COOH formation with lower free energy than Ni@N₄, in addition to exothermic CO desorption, hence enhancing electrocatalytic CO₂ conversion. This finding provides a simple, scalable, and promising route for the preparation of low‐cost, abundant, and highly active single atom catalysts, benefiting future practical CO₂ electrolysis.     

Metal‐Free Artificial Photosynthesis of Carbon Monoxide Using N‐Doped ZnTe Nanorod Photocathode Decorated with N‐Doped Carbon Electrocatalyst Layer

An artificial photosynthesis system based on N‐doped ZnTe nanorods decorated with an N‐doped carbon electrocatalyst layer is fabricated via an all‐solution process for the selective conversion of CO₂ to CO. Substitutional N‐doping into the ZnTe lattice decreases the bandgap slightly and improves the charge transfer characteristics, leading to enhanced photoelectrochemical activity. Remarkable N‐doping effects are also demonstrated by the N‐doped carbon layer that promotes selective CO₂‐to‐CO conversion instead of undesired water‐to‐H₂ reduction by providing active sites for CO₂ adsorption and activation, even in the absence of metallic redox centers. The photocathode shows promising performance in photocurrent generation (?1.21 mA cm^?2 at ?0.11 V_RHE), CO selectivity (dominant CO production of ≈72%), minor H₂ reduction (≈20%), and stability (corrosion suppression). The metal‐free electrocatalyst/photocatalyst combination prepared via a cost‐effective solution process exhibits high performance due to synergistic effects between them, and thus may find application in practical solar fuel production.     

Densely Populated Isolated Single Co?N Site for Efficient Oxygen Electrocatalysis

Atomically dispersed transition metals confined with nitrogen on a carbon support has demonstrated great electrocatalytic performance, but an extremely low concentration of metal atoms (usually below 1.5%) is necessary to avoid aggregation through sintering which limits mass activity. Here, a salt‐template method to fabricate densely populated, monodispersed cobalt atoms on a nitrogen‐doped graphene‐like carbon support is reported, and achieving a dramatically higher site fraction of Co atoms (≈15.3%) in the catalyst and demonstrating excellent electrocatalytic activity for both the oxygen reduction reaction and oxygen evolution reaction. The atomic dispersion and high site fraction of Co provide a large electrochemically active surface area of ≈105.6 m² g^?1, leading to very high mass activity for ORR (≈12.164 A mg_Co^?1 at 0.8 V vs reversible hydrogen electrode), almost 10.5 times higher than that of the state‐of‐the‐art benchmark Pt/C catalyst (1.156 A mg_Pt^?1 under similar conditions). It also demonstrates an outstanding mass activity for OER (0.278 A mg_Co^?1). The Zn‐air battery based on this bifunctional catalyst exhibits high energy density of 945 Wh kg_Zn^?1 as well as remarkable stability. In addition, both density functional theory based simulations and experimental measurements suggest that the Co? N₄ sites on the carbon matrix are the most active sites for the bifunctional oxygen electrocatalytic activity.     

Carbon limitation of soil respiration under winter snowpacks: potential feedbacks between growing season and winter carbon fluxes

A reduction in the length of the snow‐covered season in response to a warming of high‐latitude and high‐elevation ecosystems may increase soil carbon availability both through increased litter fall following longer growing seasons and by allowing early winter soil frosts that lyse plant and microbial cells. To evaluate how an increase in labile carbon during winter may affect ecosystem carbon balance we investigated the relationship between carbon availability and winter CO₂ fluxes at several locations in the Colorado Rockies. Landscape‐scale surveys of winter CO₂ fluxes from sites with different soil carbon content indicated that winter CO₂ fluxes were positively related to carbon availability and experimental additions of glucose to soil confirmed that CO₂ fluxes from snow‐covered soil at temperatures between 0 and ?3°C were carbon limited. Glucose added to snow‐covered soil increased CO₂ fluxes by 52–160% relative to control sites within 24 h and remained 62–70% higher after 30 days. Concurrently a shift in the δ¹³C values of emitted CO₂ toward the glucose value indicated preferential utilization of the added carbon confirming the presence of active heterotrophic respiration in soils at temperatures below 0°C. The sensitivity of these winter fluxes to substrate availability, coupled with predicted changes in winter snow cover, suggests that feedbacks between growing season carbon uptake and winter heterotrophic activity may have unforeseen consequences for carbon and nutrient cycling in northern forests. For example, published winter CO₂ fluxes indicate that on average 50% of growing season carbon uptake currently is respired during the winter; changes in winter CO₂ flux in response to climate change have the potential to reduce substantially the net carbon sink in these ecosystems.     

Tailoring FeN4 Sites with Edge Enrichment for Boosted Oxygen Reduction Performance in Proton Exchange Membrane Fuel Cell

Transition metal atoms with corresponding nitrogen coordination are widely proposed as catalytic centers for the oxygen reduction reaction (ORR) in metal–nitrogen–carbon (M–N–C) catalysts. Here, an effective strategy that can tailor Fe–N–C catalysts to simultaneously enrich the number of active sites while boosting their intrinsic activity and utilization is reported. This is achieved by edge engineering of FeN₄ sites via a simple ammonium chloride salt‐assisted approach, where a high fraction of FeN₄ sites are preferentially generated and hosted in a graphene‐like porous scaffold. Theoretical calculations reveal that the FeN₄ moieties with adjacent pore defects are likely to be more active than the nondefective configuration. Coupled with the facilitated accessibility of active sites, this prepared catalyst, when applied in a practical H₂–air proton exchange membrane fuel cell, delivers a remarkable peak power density of 0.43 W cm^?2, ranking it as one of the most active M–N–C catalysts reported to date. This work provides a new avenue for boosting ORR activity by edge manipulation of FeN₄ sites.     

Facile Metal Coordination of Active Site Imprinted Nitrogen Doped Carbons for the Conservative Preparation of Non‐Noble Metal Oxygen Reduction Electrocatalysts

Iron‐ or cobalt‐coordinated heteroatom doped carbons are promising alternatives for Pt‐based cathode catalysts in polymer‐electrolyte fuel cells. Currently, these catalysts are obtained at high temperatures. The reaction conditions complicate the selective and concentrated formation of metal–nitrogen active sites. Herein a mild procedure is introduced, which is conservative toward the carbon support and leads to active‐site formation at low temperatures in a wet‐chemical metal‐coordination step. Active‐site imprinted nitrogen doped carbons are synthesized via ionothermal carbonization employing Lewis‐acidic Mg²⁺ salt. The obtained carbons with large tubular porosity and imprinted N₄ sites lead to very active catalysts with a half‐wave potential (E_1/2) of up to 0.76 V versus RHE in acidic electrolyte after coordination with iron. The catalyst shows 4e^? selectivity and exceptional stability with a half‐wave potential shift of only 5 mV after 1000 cycles. The X‐ray absorption fine structure as well as the X‐ray absorption near edge structure profiles of the most active catalyst closely match that of iron(II)phthalocyanine, proving the formation of active and stable FeN₄ sites at 80 °C. Metal‐coordination with other transition metals reveals that Zn–N_x sites are inactive, while cobalt gives rise to a strong performance increase even at very low concentrations.     

Solar‐Light‐Driven CO2 Reduction by CH4 on Silica‐Cluster‐Modified Ni Nanocrystals with a High Solar‐to‐Fuel Efficiency and Excellent Durability

Catalytic CO₂ reforming of CH₄ (CRM) to produce syngas (H₂ and CO) provides a promising approach to reducing global CO₂ emissions and the extensive utilization of natural gas resources. However, the rapid deactivation of the reported catalysts due to severe carbon deposition at high reaction temperatures and the large energy consumption of the process hinder its industrial application. Here, a method for almost completely preventing carbon deposition is reported by modifying the surface of Ni nanocrystals with silica clusters. The obtained catalyst exhibits excellent durability for CRM with almost no carbon deposition and deactivation after reaction for 700 h. Very importantly, it is found that CRM on the catalyst can be driven by focused solar light, thus providing a promising new approach to the conversion of renewable solar energy to fuel due to the highly endothermic characteristics of CRM. The reaction yields high production rates of H₂ and CO (17.1 and 19.9 mmol min^?1 g^?1, respectively) with a very high solar‐to‐fuel efficiency (η, 12.5%). Even under focused IR irradiation with a wavelength above 830 nm, the η of the catalyst remains as high as 3.1%. The highly efficient catalytic activity arises from the efficient solar‐light‐driven thermocatalytic CRM enhanced by a novel photoactivation effect.     

Zn0.35Co0.65O – A Stable and Highly Active Oxygen Evolution Catalyst Formed by Zinc Leaching and Tetrahedral Coordinated Cobalt in Wurtzite Structure

To arrive to sustainable hydrogen‐based energy solutions, the understanding of water‐splitting catalysts plays the most crucial role. Herein, state‐of‐the‐art hypotheses are combined on electrocatalytic active metal sites toward the oxygen evolution reaction (OER) to develop a highly efficient catalyst based on Earth‐abundant cobalt and zinc oxides. The precursor catalyst Zn_0.35Co_0.65O is synthesized via a fast microwave‐assisted approach at low temperatures. Subsequently, it transforms in situ from the wurtzite structure to the layered γ‐Co(O)OH, while most of its zinc leaches out. This material shows outstanding catalytic performance and stability toward the OER in 1 m KOH (overpotential at 10 mA cm^?2 η_initial = 306 mV, η_{98 h} = 318 mV). By comparing the electrochemical results and ex situ analyses to today's literature, clear structure‐activity correlations are able to be identified. The findings suggest that coordinately unsaturated cobalt octahedra on the surface are indeed the active centers for the OER.     

Rational Design of Nanocatalysts with Nonmetal Species Modification for Electrochemical CO2 Reduction

Converting CO₂ to valuable carbonaceous fuels and chemicals via electrochemical CO₂ reduction by using renewable energy sources is considered to be a scalable strategy with substantial environmental and economic benefits. One of the challenges in this field is to develop nanocatalysts with superior electrocatalytic activity and selectivity for targeted products. Nonmetal species modification of nanocatalysts is of great significance for the construction of distinctive active sites to overcome the kinetic limitations of CO₂ reduction. These types of modification enable the efficient control of the selectivity and significantly decrease the reaction overpotential. Herein, a comprehensive review of the recent progress of nonmetal species modification of nanocatalysts for electrochemical CO₂ reduction is presented. After discussing some fundamental parameters and the basic principles of CO₂ reduction, including possible reaction pathways in light of theoretical modeling and experiments, the identification of active sites and elucidation of reaction mechanisms are emphasized for unraveling the role of nonmetal species modification, such as heteroatom incorporation, organic molecule decoration, electrolyte engineering, and single‐atom engineering. In the final section, future challenges and constructive perspectives are provided, facilitating the accelerated advancement of mechanism research and practical applications of green carbon cycling.     

Engineering Local Coordination Environments of Atomically Dispersed and Heteroatom‐Coordinated Single Metal Site Electrocatalysts for Clean Energy‐Conversion

Carbon‐based heteroatom‐coordinated single‐atom catalysts (SACs) are promising candidates for energy‐related electrocatalysts because of their low‐cost, tunable catalytic activity/selectivity, and relatively homogeneous morphologies. Unique interactions between single metal sites and their surrounding coordination environments play a significant role in modulating the electronic structure of the metal centers, leading to unusual scaling relationships, new reaction mechanisms, and improved catalytic performance. This review summarizes recent advancements in engineering of the local coordination environment of SACs for improved electrocatalytic performance for several crucial energy‐convention electrochemical reactions: oxygen reduction reaction, hydrogen evolution reaction, oxygen evolution reaction, CO₂ reduction reaction, and nitrogen reduction reaction. Various engineering strategies including heteroatom‐doping, changing the location of SACs on their support, introducing external ligands, and constructing dual metal sites are comprehensively discussed. The controllable synthetic methods and the activity enhancement mechanism of state‐of‐the‐art SACs are also highlighted. Recent achievements in the electronic modification of SACs will provide an understanding of the structure–activity relationship for the rational design of advanced electrocatalysts.     

Hydride‐Enhanced CO2 Methanation: Water‐Stable BaTiO2.4H0.6 as a New Support

Catalytic CO₂ hydrogenation to CH₄ provides a promising approach to producing natural gas, and reducing the emissions of global CO₂. However, the efficiency of catalytic CO₂ methanation is limited by slow kinetics at low temperatures. This study first demonstrates that an air‐ and water‐stable perovskite oxyhydride BaTiO_2.4H_0.6 could function as an active support material for Ni‐, Ru‐based catalysts for CO₂ methanation at 300–350 °C, a relatively lower temperature. With the oxyhydride support, the activity for Ni and Ru increases by a factor of 2–7 when compared to the BaTiO₃ oxide support. Kinetic analysis shows reduced H₂ poisoning probably due to spillover, implying that the activity change is due to the kinetics being influenced by hydride. Furthermore, the oxyhydride‐supported Ni catalyst is also durable with its catalytic performance preserved for at least 10 h under a humid environment at elevated temperatures. It is anticipated that these perovskite oxyhydrides will shed new light on the design of high‐efficiency metal‐based catalysts for water‐involved catalytic reactions.     

The Effects of Catalyst Layer Deposition Methodology on Electrode Performance

The catalyst layer of the cathode is arguably the most critical component of low‐temperature fuel cells and carbon dioxide (CO₂) electrolysis cells because their performance is typically limited by slow oxygen (O₂) and CO₂ reduction kinetics. While significant efforts have focused on developing cathode catalysts with improved activity and stability, fewer efforts have focused on engineering the catalyst layer structure to maximize catalyst utilization and overall electrode and system performance. Here, we study the performance of cathodes for O₂ reduction and CO₂ reduction as a function of three common catalyst layer preparation methods: hand‐painting, air‐brushing, and screen‐printing. We employed ex‐situ X‐ray micro‐computed tomography (MicroCT) to visualize the catalyst layer structure and established data processing procedures to quantify catalyst uniformity. By coupling structural analysis with in‐situ electrochemical characterization, we directly correlate variation in catalyst layer morphology to electrode performance. MicroCT and SEM analyses indicate that, as expected, more uniform catalyst distribution and less particle agglomeration, lead to better performance. Most importantly, the analyses reported here allow for the observed differences over a large geometric volume as a function of preparation methods to be quantified and explained for the first time. Depositing catalyst layers via a fully‐automated air‐brushing method led to a 56% improvement in fuel cell performance and a significant reduction in electrode‐to‐electrode variability. Furthermore, air‐brushing catalyst layers for CO₂ reduction led to a 3‐fold increase in partial CO current density and enhanced product selectivity (94% CO) at similar cathode potential but a 10‐fold decrease in catalyst loading as compared to previous reports.     

Enhanced Cathodic Oxygen Reduction and Power Production of Microbial Fuel Cell Based on Noble‐Metal‐Free Electrocatalyst Derived from Metal‐Organic Frameworks

Microbial fuel cell (MFC) can generate electricity from organic substances based on anodic electrochemically active microorganisms and cathodic oxygen reduction reaction (ORR), thus exhibiting promising potential for harvesting electric energy from organic wastewater. The ORR performance is crucial to both power production efficiency and overall cost of MFC. A new type of metal‐organic‐framework‐derived electrocatalysts containing cobalt and nitrogen‐doped carbon (CoNC) is developed, which is effective to enhance activity, selectivity, and stability toward four‐electron ORR in pH‐neutral electrolyte. When glucose is used as the substrate, the maximum power density of 1665 mW m^?2 is achieved for the optimized CoNC pyrolyzed at 900 °C, which is 39.8% higher than that of 1191 mW m^?2 for commercial Pt/C catalyst in the single‐chamber MFC. The improved performance of CoNC catalyst can be attributed to large surface area, microporous nature, and the involvement of nitrogen‐coordinated cobalt species. These properties enable the efficient ORR by increasing the active sites and enhancing mass transfer of oxygen and protons at “water‐flooding” three‐phase boundary where ORR occurs. This work provides a proof‐of‐concept demonstration of a noble‐metal‐free high‐efficiency and cost‐effective ORR electrocatalyst for effective recovery of electricity from biomass materials and organic wastewater in MFC.     

Bi‐Based Metal‐Organic Framework Derived Leafy Bismuth Nanosheets for Carbon Dioxide Electroreduction

Electroreduction of carbon dioxide (CO₂) into high‐value and readily collectable liquid products is vital but remains a substantial challenge due to the lack of highly efficient and robust electrocatalysts. Herein, Bi‐based metal‐organic framework (CAU‐17) derived leafy bismuth nanosheets with a hybrid Bi/Bi? O interface (Bi NSs) is developed, which enables CO₂ reduction to formic acid (HCOOH) with high activity, selectivity, and stability. Specially, the flow cell configuration is employed to eliminate the diffusion effect of CO₂ molecules and simultaneously achieve considerable current density (200 mA cm^?2) for industrial application. The faradaic efficiency for transforming CO₂ to HCOOH can achieve over 85 or 90% in 1 m KHCO₃ or KOH for at least 10 h despite a current density that exceeds 200 mA cm^?2, outperforming most of the reported CO₂ electroreduction catalysts. The hybrid Bi/Bi? O surface of leafy bismuth nanosheets boosts the adsorption of CO₂ and protects the surface structure of the as‐prepared leafy bismuth nanosheets, which benefits its activity and stability for CO₂ electroreduction. This work shows that modifying electrocatalysts by surface oxygen groups is a promising pathway to regulate the activity and stability for selective CO₂ reduction to HCOOH.     

Controlling the Active Sites of Sulfur‐Doped Carbon Nanotube–Graphene Nanolobes for Highly Efficient Oxygen Evolution and Reduction Catalysis

Controlling active sites of metal‐free catalysts is an important strategy to enhance activity of the oxygen evolution reaction (OER). Many attempts have been made to develop metal‐free catalysts, but the lack of understanding of active‐sites at the atomic‐level has slowed the design of highly active and stable metal‐free catalysts. A sequential two‐step strategy to dope sulfur into carbon nanotube–graphene nanolobes is developed. This bidoping strategy introduces stable sulfur–carbon active‐sites. Fluorescence emission of the sulfur K‐edge by X‐ray absorption near edge spectroscopy (XANES) and scanning transmission electron microscopy electron energy loss spectroscopy (STEM‐EELS) mapping and spectra confirm that increasing the incorporation of heterocyclic sulfur into the carbon ring of CNTs not only enhances OER activity with an overpotential of 350 mV at a current density of 10 mA cm^?2, but also retains 100% of stability after 75 h. The bidoped sulfur carbon nanotube–graphene nanolobes behave like the state‐of‐the‐art catalysts for OER but outperform those systems in terms of turnover frequency (TOF) which is two orders of magnitude greater than (20% Ir/C) at 400 mV overpotential with very high mass activity 1000 mA cm^?2 at 570 mV. Moreover, the sulfur bidoping strategy shows high catalytic activity for the oxygen reduction reaction (ORR). Stable bifunctional (ORR and OER) catalysts are low cost, and light‐weight bidoped sulfur carbon nanotubes are potential candidates for next‐generation metal‐free regenerative fuel cells.