Two-dimensional proton NMR studies on poly(VPGVG) and its cyclic conformational correlate, cyclo(VPGVG)3

Two-dimensional nuclear Overhauser enhancement (2D NOESY) data are reported for the polypentapeptide of elastin, poly(VPGVG), and the cyclopentadecapeptide, cyclo(VPGVG)3. In both, the repeating type II Pro2-Gly3 beta-turn can be derived from the NOE data, providing confirmation of many previous studies. In addition, other through-space connectivities are detailed that also compare favorably with previously determined crystal and solution structures for cyclo(VPGVG)3. Also, near identical data for the cyclopentadecapeptide and the polypentapeptide demonstrate the cyclic conformation-linear (helical) conformational correlate relationship between the two molecules. The 2D NOESY experiment is seen to be an effective means of establishing the presence or absence of a conformational relationship between a cyclic repeating sequence and its higher molecular weight linear counterpart. This is an approach of substantial practical value when developing the conformation of sequential polypeptides and when attempting to identify the presence of the conformation of a repeating peptide sequence within a more complex primary structure. Having established the basic conformational relationship between a cyclic conformation and its linear helical counterpart, cross peaks present in the linear helical structure that are not present in the cyclic conformational correlate can provide information on the interactions between adjacent turns of the helix. In this connection, a Val gamma CH3 in equilibrium Pro beta CH2 interaction is reported that can be the basis for determining the number of pentamers per turn of helix once it is determined whether it is dominantly the Val1 or Val4 gamma CH3 that is interacting with the Pro2 beta CH2.     

Temperature-induced conformational transition of a model elastin-like peptide GVG(VPGVG)(3) in water

The conformation of a single elastin-like peptide GVG(VPGVG)3 in liquid water is studied by computer simulations in the temperature interval between 280 and 440 K. Two main conformational states of the peptide can be distinguished: a rigid conformational state, dominating at low temperatures, and a flexible conformational state, dominating at high temperatures. A temperature-induced transition between these states occurs at about 310 K, rather close to a transition temperature seen in experiments. This transition is accompanied by the thermal breaking of the hydrogen-bonded spanning network of the hydration water via a percolation transition upon heating. This finding indicates that the H-bond clustering structure of the hydration water plays an important role in the conformational stability of biomolecules. A second important observation is the Gaussian distribution of the end-to-end distance in the high-temperature state, which supports the idea of a rubber-like elasticity of the studied elastin-like peptide. Finally our results challenge the idea of the folding of elastin-like peptides upon heating.     

Temperature-dependent conformational transitions and hydrogen-bond dynamics of the elastin-like octapeptide GVG(VPGVG): a molecular-dynamics study

A joint experimental/theoretical investigation of the elastin-like octapeptide GVG(VPGVG) was carried out. In this article a comprehensive molecular-dynamics study of the temperature-dependent folding and unfolding of the octapeptide is presented. The current study, as well as its experimental counterpart (see companion article in this issue) find that this peptide undergoes an inverse temperature transition (ITT), leading to a folding at approximately 40-60 degrees C. In addition, an unfolding transition is identified at unusually high temperatures approaching the normal boiling point of water. Due to the small size of the system, two broad temperature regimes are found: the ITT regime at approximately 10-60 degrees C and the unfolding regime at approximately T > 60 degrees C, where the peptide has a maximum probability of being folded at T approximately 60 degrees C. A detailed molecular picture involving a thermodynamic order parameter, or reaction coordinate, for this process is presented along with a time-correlation function analysis of the hydrogen-bond dynamics within the peptide as well as between the peptide and solvating water molecules. Correlation with experimental evidence and ramifications on the properties of elastin are discussed.     

Production and purification of a recombinant elastomeric polypeptide, G-(VPGVG)19-VPGV, from Escherichia coli.

An elastomeric polypeptide was produced, with the sequence G-(VPGVG)19-VPGV, as a fusion to glutathione S-transferase using the vector pGEX-3X. The fusion protein was expressed to high levels in Escherichia coli as indicated by SDS-PAGE analysis of induced cells. The fusion protein was affinity purified and cleaved with protease factor Xa, and the elastomeric polypeptide was recovered to a high degree of purity as indicated by SDS-PAGE followed by staining with CuCl2. The physical characterizations of carbon-13 and proton nuclear magnetic resonance and of the temperature profile for turbidity formation for the inverse temperature transition of hydrophobic folding and assembly attest to the successful microbial synthesis of the polypentapeptide of elastin. The results of these studies provide the initial progress toward achieving a more economical and practical means of producing material for elastic protein-based polymer research and applications.     

Differential scanning calorimetry study of the hydrophobic hydration of the elastin-based polypentapeptide, poly(VPGVG), from deficiency to excess of water

The polypentapeptide of elastin, poly(VPGVG), has become an interesting model polypeptide in understanding the mechanism of protein folding and assembly. Due to its simple amino acid composition and the predominance of apolar side chains, this polymer shows strong hydrophobic-hydration phenomena. This paper explores, by calorimetric methods, the nature and structure of the clathrate-like arrangements that take place, surrounding the apolar side chains of the polymer. The performance of these methods, especially differential scanning calorimetry, has a well-gained reputation. In this work, the development of the clathrate-like structures around this model polymer has been followed from water deficiency to water-excess states. Two main conclusions have been obtained from the data obtained. First, there is an upper limit of about 170 water molecules per pentamer as the number of water molecules required to form all the possible clathrate-like structures. Second, these structures exist as an inhomogeneous population with energies spreading in a significantly broad range, which is likely related to differences in geometrical parameters (bond lengths and angles) of the clathrate structure.Copyright 2000 John Wiley & Sons, Inc.     

Characterization of the temperature- and pressure-induced inverse and reentrant transition of the minimum elastin-like polypeptide GVG(VPGVG) by DSC, PPC, CD, and FT-IR spectroscopy

We investigated the temperature- and pressure-dependent structure and phase behavior of a solvated oligopeptide, GVG(VPGVG), which serves as a minimalistic elastin-like model system, over a large region of the thermodynamic phase field, ranging from 2 to 120°C and from ambient pressure up to ~10 kbar, applying various spectroscopic (CD, FT-IR) and thermodynamic (DSC, PPC) measurements. We find that this octapeptide behaves as a two-state system which undergoes the well-known inverse-temperature folding transition occurring at T ≈ 36°C, and, in addition, a slow trend reversal at higher temperatures, finally leading to a reentrant unfolding close to the boiling point of water. Furthermore, the pressure-dependence of the folding/unfolding transition was studied to yield a more complete picture of the p, T-stability diagram of the system. A molecular-level picture of these processes, in particular on the role of water for the folding and unfolding events of the peptide, presented with the help of molecular-dynamics simulations, is presented in a companion article in this issue.     

Structural requirements essential for elastin coacervation: favorable spatial arrangements of valine ridges on the three‐dimensional structure of elastin‐derived polypeptide (VPGVG)n

The elastin precursor tropoelastin possesses a number of polymeric peptides with repeating 3–9 mer sequences. One of these is the pentapeptide Val‐Pro‐Gly‐Val‐Gly (VPGVG) present in almost all animal species, and its polymer (VPGVG)n coacervates just as does tropoelastin. In the present study, in order to explore the structural requirements essential for coacervation, (VPGVG)n and its shortened repeat analogs (VPGV)n, (VPG)n, and (PGVG)n were synthesized and their structural properties were investigated. In our turbidity measurements, (VPGVG)n demonstrated complete reversible coacervation in agreement with previous findings. The Gly⁵‐deleted polymer (VPGV)n also achieved self‐association, though the onset of self‐association occurred at a lower temperature. However, the dissociation of (VPGV)n upon temperature lowering was found to occur in a three‐step process; the Val_i⁴‐Val_i+1¹ structure arising in the VPGV polypeptide appeared to perturb the dissociation. No self‐association was observed for (VPG)n or (PGVG)n repeats. Spectroscopic measurements by CD, FT‐IR, and ¹H‐NMR showed that the (VPGV)n and (VPG)n both assumed ordered structures similar to that of (VPGVG)n. These results demonstrated that VPGVG is a structural element essential to achieving the β‐spiral structure required for self‐association followed by coacervation, probably due to the ideal spatial arrangement of the hydrophobic Val residues. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Copper (II) and cobalt (II) complexes of chiral tetrathiafulvalene-oxazoline (TTF-OX) and tetrathiafulvalene-thiomethyl-oxazoline (TTF-SMe-OX) derivatives

Synthesis and single crystal X-ray structures of the first paramagnetic transition metal complexes containing chiral ethylenedithio-tetrathiafulvalene-oxazoline (EDT-TTF-OX) 1a-c and ethylenedithio-tetrathiafulvalene-thiomethyloxazoline 2 (EDT-TTF-(SMe)OX) ligands based on copper (II) and cobalt (II) are described. The racemic [EDT-TTF-OX][Cu(hfac)₂] complex 3a crystallizes in the triclinic centrosymmetric space group , whereas the enantiopure counterparts 3b-c crystallize in the triclinic non-centrosymmetric space group P1. Cu(II) adopts a distorted square pyramidal coordination geometry, a much weaker Cu?S_TTF interaction also being identified. The same coordination pattern around Cu(II) is observed in the complex [(rac)-EDT-TTF-(SMe)OX][Cu(hfac)₂] (4) in spite of the bidentate nature of the redox active ligand. DFT theoretical calculations afforded two equilibrium configurations for a corresponding model complex, in which the metal centre establishes secondary coordination either with one S_TTF or with the SMe group. The same ligand coordinates the cobalt (II) to afford the octahedral complex [(rac)-EDT-TTF-(SMe)OX][Co(hfac)₂] (5). In all these novel complexes, the paramagnetic centres are structurally and magnetically isolated. Cyclic voltammetry measurements show the stability of the radical cation species.     

Proton exchange and base-pair kinetics of poly(rA).poly(rU) and poly(rI).poly(rC)

Proton exchange of poly(rA).poly(rU) and poly(rI).poly(rC) has been studied by nuclear magnetic resonance line broadening and saturation transfer from H2O. Five exchangeable peaks are observed. They are assigned to the imino, amino and 2'-OH ribose protons. The aromatic spectrum is also assigned. Contrary to previous observations, we find that the exchange of the imino proton is strongly buffer sensitive. This property is used to derive the base-pair lifetime, which is in the range of milliseconds at 27 degrees C, 100 times smaller than published values. The enthalpy for the base-opening reaction (-86 kJ/mol) and the insensitivity of the reaction to magnesium suggest that the open state involves a small number of base-pairs. The similarities in the exchange from the two duplexes indicate that the same open state is responsible for exchange of purine and pyrimidine imino protons. For the lifetime of the open state and for the base-pair dissociation constant, we obtain only lower limits. At 27 degrees C they are three microseconds and 10(-3), respectively. The analysis that yields the much larger values published previously is based on the assumption that amino protons exchange only from open base-pairs. But theory and preliminary experiments indicate that it may occur from the closed duplex. The exchange of amino protons is slower than that of the imino protons. Exchange of the 2'-OH protons from the duplexes is much slower than from single-stranded poly(rU), and it is accelerated by magnesium. This could indicate hydrogen-bonding to backbone phosphate. Discrepancies between our results and those of previous studies are discussed.     

Binding of tetrakis(pyrazoliumyl)porphyrin and its copper(II) and zinc(II) complexes to poly(dG-dC)2 and poly(dA-dT)2

Interactions of cationic porphyrins bearing five-membered rings at the meso position, meso-tetrakis(1,2-dimethylpyrazolium-4-yl)porphyrin (MPzP; M is H₂, Cu^II or Zn^II), with synthetic polynucleotides poly(dG-dC)₂ and poly(dA-dT)₂ have been characterized by viscometric, visible absorption, circular dichroisim and magnetic circular dichroism spectroscopic and melting temperature measurements. Both H₂PzP and CuPzP are intercalated into poly(dG-dC)₂ and are outside-bound to the major groove of poly(dA-dT)₂, while ZnPzP is outside-bound to the minor groove of poly(dA-dT)₂ and surprisingly is intercalated into poly(dG-dC)₂. The binding constants of the porphyrin and poly(dG-dC)₂ and poly(dA-dT)₂ are on the order of 10⁶ M⁻¹ and are comparable to those of other cationic porphyrins so far reported. The process of the binding of the porphyrin to poly(dG-dC)₂ and poly(dA-dT)₂ is exothermic and enthalpically driven for H₂PzP, whereas it is endothermic and entropically driven for CuPzP and ZnPzP. These results have revealed that the kind of the central metal ion of metalloporphyrins influences the characteristics of the binding of the porphyrins to DNA.Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

Nature and composition of La(III), Ce(III), Pr(III), Nd(III), Sm(III), Gd(III), Dy(III) and Ho(III) complexes of embelin

The isolation and characterization of nine polymeric complexes of the general formula [M(L)_1.5S₂]_n (where M is the metal ion, L the ligand and S the solvent, C₂H₅OH) of La(III) and Ce(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III), Dy(III), Ho(III) with.the biologically active compound embelin using elemental and thermal analysis, infrared and electronic spectral studies is reported.     

Circular dichroism spectra of DNA quadruplexes [d(G(5)T(5))](4) as formed with G(4) and T(4) tetrads and [d(G(5)T(5)). d(A(5)C(5))]2 as formed with Watson-Crick-like (G-C)(2) and (T-A)(2) tetrads

We utilize electrophoresis and find that a thermally treated equimolar mixture of the oligonucleotide d(G(5)T(5)) and its complementary oligonucleotide d(A(5)C(5)) exhibits either two bands or a single band in one lane, depending on the conditions of the incubation solutions. The thermally treated d(G(5)T(5)) solution loaded in a different lane exhibits a single band of the parallel quadruplex [d(G(5)T(5))](4), which is composed of homocyclic hydrogen-bonded G(4) and T(4) tetrads previously proposed. For the thermally treated equimolar mixture of d(G(5)T(5)) and d(A(5)C(5)), the fast band is assigned to a Watson-Crick d(G(5)T(5)). d(A(5)C(5)) duplex, so that the slow band with the same low mobility as that of [d(G(5)T(5))](4) may be assigned to either [d(G(5)T(5))](4) itself or a [d(G(5)T(5)). d(A(5)C(5))](2) quadruplex. If the latter compound is true, this may be the antiparallel quadruplex composed of the heterocyclic hydrogen-bonded G-C-G-C and T-A-T-A tetrads proposed previously. After removing these three bands for the duplex and two kinds of hypothetical quadruplexes, we electrophoretically elute the corresponding compounds in the same electrophoresis buffer using an electroeluter. The eluted compounds are ascertained to be stable by electrophoresis. The circular dichroism (CD) and UV absorption spectra measured for the three isolated compounds are found to be clearly different. For the electrophoretic elution of the hypothetical [d(G(5)T(5))](4) quadruplex, the result of the molecularity of n = 4 obtained from the CD melting curve analysis provides further support for the formation of the parallel [d(G(5)T(5))](4) quadruplex already proposed. For the thermally treated equimolar mixture of d(G(5)T(5)) and d(C(5)A(5)), the fast band with a molecularity of n = 2 corresponds to the Watson-Crick duplex, d(G(5)T(5)). d(A(5)C(5)). The slow band with a molecularity of n = 4 indicates the antiparallel quadruplex [d(G(5)T(5)). d(A(5)C(5))](2), whose observed CD and UV spectra are different from those of [d(G(5)T(5))](4). By electrophoresis, after reannealing the eluted compound [d(G(5)T(5)). d(A(5)C(5))](2), a distinct photograph showing the band splitting of this quadruplex band into the lower duplex and upper quadruplex bands is not possible; but by a transilluminator, we occasionally observe this band splitting with the naked eye. The linear response polarizability tensor calculations for the thus determined structures of the [d(G(5)T(5))](4) quadruplex, the McGavin-like [d(G(5)T(5)). d(A(5)C(5))](2) quadruplex, and the Watson-Crick d(G(5)T(5)). d(A(5)C(5)) duplex are found to qualitatively predict the observed CD and UV spectra.     

Dy(3+) and Mn(2+) emission in fluoride- and chloride-based Na(3) (SO(4) )X (X = F or Cl) phosphors

In the present study, Na₃(SO₄)X (X = F or Cl) halosulphate phosphors have been synthesized by the solid‐state diffusion method. The phase formation of the compounds Na₃(SO₄)F and Na₃(SO₄)Cl were confirmed by X‐ray powder diffraction (XRD) measurement. Photoluminescence (PL) excitation spectrum measurement of Na₃(SO₄)F:Ce³⁺ and Na₃(SO₄)Cl:Ce³⁺ shows this phosphor can be efficiently excited by near‐ultraviolet (UV) light and presents a dominant luminescence band centred at 341 nm for Ce³⁺, which is responsible for energy transfer to Dy³⁺and Mn²⁺ ions. The efficient Ce³⁺ → Dy³⁺ energy transfer in Na₃(SO₄)F and Na₃(SO₄)Cl under UV wavelength was observed due to ⁴ F_9/2 to ⁶H_15/2 and ⁶H_13/2 level, while Ce³⁺ → Mn²⁺ was observed due to ⁴ T₁ state to ⁶A₁. The purpose of the present study is to develop and understanding the photoluminescence properties of Ce³⁺‐, Dy³⁺‐ and Mn²⁺‐doped fluoride and chloride Na₃(SO₄)X (X = F or Cl) luminescent material, which can be the efficient phosphors in many applications, such as scintillation applications, TL dosimetry and the lamp industry, etc. Copyright © 2012 John Wiley & Sons, Ltd.     

Photophysical characterization and in vitro anti-leishmanial effect of 5,10,15,20-tetrakis(4-fluorophenyl) porphyrin and the metal (Zn(II), Sn(IV), Mn(III) and V(IV)) derivatives

BioMetals - In this report 5 compounds were synthesized and structural and their photophysical characterization was performed (ΦΔ and Φf). Furthermore, in this in vitro study, their...     

Synthesis and spectroscopic properties of CpRuCl(R-DAB(4e)) and CpRuCo(CO)3(R-DAB(6e)). Part XVII. X-ray structure determination of CpRuCo(CO)3(t-Bu-DAB(6e))

CpRuCl(PPh₃)₂ reacted with excess R-DAB in refluxing toluene to give CpRuCl(R-DAB(4e)) (1a: R = i-Pr; 1b: R = t-Bu; 1c: R = neo-Pent; 1d: R =p-Tol). ¹H NMR and ¹³C NMR spectroscopic data indicated that in these complexes the R-DAB ligand is bonded in a chelating 4e coordination mode.Reaction of 1a and 1b with one equivalent of [Co(CO)₄]⁻ afforded CpRuCo(CO)₃(R-DAB(6e)) (2a: R = i-Pr; 2b: R = t-Bu). The structure of 2b was determined by a single crystal X-ray structure determination. Crystals of 2b are monoclinic, space group P2₁/n, with four molecules in a unit cell of dimensions: a = 16.812(4), b = 12.233(3), c = 9.938(3) Å and β = 105.47(3)°. The structure was solved via the heavy atom method and refined to R = 0.060 and R_w = 0.065 for the 3706 observed reflections. The molecule contains a RuCo bond of 2.660(3) Å and a cyclopentadienyl group that is η⁵-coordinated to ruthenium [RuC(cyclopentadienyl) = 2.208(3) Å (mean)]. Two carbonyls are terminally coordinated to cobalt (CoC(1) = 1.746(7) and CoC(2) = 1.715(6) Å) while the third is slightly asymmetrically bridging the RuCo bond (RuC(3) = 2.025(6) and CoC(3) = 1.912(6) Å). The RuC(3)O(3) and CoC(3)O(3) angles are 138.4(5)° and 136.5(5)°, respectively. The t-Bu-DAB ligand is in the bridging 6e coordination mode: σ-N coordinated to Ru (RuN(2) = 2.125(4) Å), μ₂-N′ bridging the RuCo bond and η²-CN coordinated to Co (RuN(1) = 2.113(5), CoN(1) = 1.941(4) and CoC(4) = 2.084(5) Å). The η²-CN′ bonded imine group has a bond length of 1.394(7) Å indicating substantial π-backbonding from Co into the anti-bonding orbital of this CN bond.¹H NMR spectroscopy indicated that 2a and 2b are fluxional on the NMR time scale. The fluxionality of 6e bonded R-DAB ligands is rarely observed and may be explained by the reversible interchange of the σ-N and η²-CN′ coordinated imine parts of the R-DAB ligand.     

Adsorptive Removal and Recovery of U(VI), Cu(II), Zn(II), and Co(II) from Water and Industry Effluents

Tamarind fruit shell (TFS) was converted to a cation exchanger (PGTFS-SP-COOH) having a carboxylate functional group at the chain end by grafting poly(hydroxyethylmethacrylate) onto TFS (a lignocellulosic residue) using potassium peroxydisulfate-sodium thiosulfate redox initiator, and in the presence of N, N ′-methylenebisacrylamide as a cross-linking agent, followed by functionalization. The chemical modification was investigated using Fourier transform infrared (FTIR), X-ray diffraction (XRD), and potentiometric titrations. The feasibility of PGTFS-SP-COOH for the removal of heavy metals such as U(VI), Cu(II), Zn(II), and Co(II) ions from aqueous solutions was investigated by batch process. The optimum pH range for the removal of meal ions was found to be 6.0. For all the metal ions, equilibrium was attained within 2 h. The kinetic and isotherm data, obtained at optimum pH value 6.0, could be fitted with pseudo-second-order equation and Sips isotherm model, respectively. The Sips maximum adsorption capacity for U(VI), Cu(II), Zn(II), and Co(II) ions at 30°C was found to be 100.79, 65.69, 65.97, and 58. 81 mg/g, respectively. Increase of ionic strength decreased the metal ion adsorption. Different wastewater samples were treated with PGTFS-SP-COOH to demonstrate its efficiency in removing metal ions from wastewater. The adsorbed metal ions on PGTFS-SP-COOH can be recovered by treating with 1.0 M NaCl + 0.5 M HCl for U(VI) ions and 0.2 M HCl for Cu(II), Co(II), and Zn(II) ions. Four adsorption/desorption cycles were performed without significant decrease in removal capacity. The results showed that PGTFS-SP-COOH developed in this study exhibited considerable adsorption potential for the removal of U(VI), Cu(II), Zn(II), and Co(II) ions from water and wastewaters.