Rapid alkaline transfer of low molecular weight DNA from NuSieve GTG agarose gels

The rapid alkaline transfer of high molecular weight DNA from agarose gels to nylon membranes has greatly decreased the time required for setup of Southern transfers. This technique has been used to resolve genomic DNA greater than 1000 base pairs by conventional electrophoresis on 1% agarose gels followed by alkaline transfer to nylon membrane. Now we report that this rapid alkaline method can be used for the transfer of low molecular weight DNA fragments (10 to 1000 base pairs) from NuSieve GTG agarose gels to nylon membrane.     

Hybridization of labeled RNA to DNA in agarose gels.

Specific DNA restriction endonuclease fragments can be identified after electrophoresis in agarose gels by hybridization in the gel (in situ) to radioactive homologous RNA. RNA-DNA hybrids are detected by autoradiography of the gel. Comparison of band patterns of the autoradiogram and the ethidium bromide stained gel allows the identification of the DNA fragment which is complementary to the RNA probe. The technique is rapid, easy and inexpensive. It is sensitive enough to detect individual genes in a mixture of fragments produced by restriction enzyme digestion of complex cellular DNA. We have used this technique to determine which of the Hin III and Eco R1 fragments of phi80d3ilv+su+7 and E. coli DNAs contain the 5S, 16S and 23S ribosomal RNA (rRNA) genes of E. coli.     

A study of electrophoretic mobility of DNA in agarose and polyacrylamide gels

The aim of this paper is to clarify the mechanism of gel electrophoresis of DNA under constant-field conditions. We have conducted a large number of experiments on double-stranded DNA varying in length between approximately 10 and approximately 50,000 base-pairs, in both agarose and polyacrylamide gels ranging from 0.5% to 12% concentration, and with electric field strengths ranging from 0.5 to 8 V/cm. We have made (logarithmic) plots of velocity against length of DNA for all of the various test conditions. At the left-hand side of these plots, all of the empirical curves have a unique, standard shape. When the curves are normalized so that their left-hand parts coincide, a second feature emerges in that, while for any given test the curve follows the "master curve" up to a certain point, it then "breaks away" and becomes horizontal. We describe these two patterns of behaviour as "regions 1 and 2", respectively. We find simple yet comprehensive empirical formulae that fit the observations in the two regions of behaviour: these express the velocity in terms of length of DNA, electric field strength and gel concentration. We then construct two separate theories for the two regions of behaviour. The first theory involves the statistics of motion of an object through a random array of gel obstacles, with the instantaneous speed depending on the number of obstacles with which the object is currently in contact. The second theory is based on the mechanical hypothesis (for which there is other, independent support) that the DNA moves through the gel by piling up against a barrier, which eventually breaks or deforms under the resulting force, thereby allowing the DNA to move on to the next barrier. The statistical theory is an adaptation of existing work, while the mechanical one is new. We also describe experiments on the migration of repeated-sequence, curved DNA with length up to 1500 base-pairs, and we discuss its behaviour in terms of our two theories. Our studies by electron microscopy are consistent with the view that this repeated-sequence DNA adopts a superhelical configuration. Finally, we show that a very wide range of observations may be understood clearly by means of our two theoretical schemes.     

The influence of agarose--DNA affinity on the electrophoretic separation of DNA fragments in agarose gels

The effects of DNA concentration, buffer composition, added "carrier" DNA, and chemical modification of agarose on the electrophoretic separation of DNA restriction fragments in agarose gels were tested. Electrophoretic zones of migrating DNA were found to broaden by trailing as sample load was decreased, and this effect was found to be more pronounced for species of higher molecular weight. As DNA sample load was increased, DNA fragments were found to move faster in the direction of electrophoresis (front forward). Sharp, well-resolved electrophoretic zones were obtained at very low DNA loads only when a high-salt, high-pH, high-EDTA buffer was employed or when "carrier DNA" having a broad and uniform molecular weight distribution was included in the sample. Moreover, DNA in high concentration was found to displace DNA in low concentration from a given gel region. Unmodified agaroses were found to differ only slightly in their effectiveness in retarding DNA fragments at a given agarose concentration. However, hydroxyethylated agarose was much more effective in retarding DNA, at a given gel concentration, than the unmodified agaroses tested. These results show that it is useful to consider the agarose gel matrix as possessing the properties of both a molecular sieve and a chromatographic adsorbent when designing electrophoretic separation techniques for DNA. A model for these separations which includes the effects of DNA-agarose interaction and molecular sieving is discussed.     

A simple method for recovering DNA from agarose gels using glass fibre filters

A simple and reproducible procedure for the recovery of plasmid DNA is described. The method was standardised for the purification of plasmids from Gluconobacter oxydans ATCC9937. The protocol is based on the use of glass microfibre filter paper for entrapment of DNA and its subsequent recovery by an elution buffer. The method precludes the use of phenol and butanol for the removal of proteins and ethidium bromide respectively, therefore, making the procedure inexpensive and gentle.     

Hybridization of DNA to RNA in methylmercuric hydroxide agarose gels

We describe a method for hybridization of cDNA probes to RNA directly in agarose gels which provides a practical alternative to methods involving transfer of the RNA out of the gel. Total cellular RNA is subjected to electrophoresis in agarose gels containing methylmercuric hydroxide as the denaturing agent. After removal of the methylmercuric hydroxide, the gel is dried and 32P-labeled DNA probes are hybridized to the immobilized RNA. This method is more economical in time and expense than methods involving transfer of the RNA out of the gel, while maintaining a level of sensitivity comparable to other procedures.     

The electrophoretic mobility of double-stranded RNA in polyacrylamide gels as a function of molecular weight.

A re-evaluation of the mobility of double-stranded RNA on polyacrylamide gels over a molecular weight range of 0.46-6.3 . 10(6) was carried out using double-stranded RNAs of: bacteriophage ?6; virus like particles or mycoviruses of Penicillium chyrsogenum, Penicillium stoloniferum and Helminthosporium maydis, and reovirus type III. When the relative mobility on polyacrylamide gels was plotted as a function of log molecular weight, a smooth curve could be drawn which passed through all points. The implications of these findings to the determination of molecular weight of double-stranded RNA by polyacrylamide gel electrophoresis are discussed.     

A simple and efficient method for the separation and detection of small DNA fragments by electrophoresis in formamide containing agarose gels and Southern blotting to DBM-paper.

We show in this report that DNA fragments smaller than 300 bp are separated with high resolution by electrophoresis in concentrated (up to 7%) agarose gels containing 50% formamide. The separated DNA fragments can subsequently be quantitatively transferred to DBM-paper [Alwine, J.C. et al., Proc. Natl. Acad. Sci. USA (1977) 74, 5350-54] using the Southern technique [Southern, E.M., J. Mol. Biol. (1975) 98, 503-517], while preserving the sharpness of the original gel pattern. Since thin (0.2-0.4 mm) and thick (up to 5 mm) agarose slab gels can be easily handled in vertical or horizontal apparatus, this method should prove to be a very useful extention of the Southern technique, applicable to a variety of analytical and preparative purposes.     

Gradient acrylamide/agarose gels for electrophoretic separation of intact human very low density lipoproteins, intermediate density lipoproteins, lipoprotein a, and low density lipoproteins

An exponential gradient gel with 0-10% acrylamide and 0.5% agarose was developed for electrophoresis of intact high molecular weight lipoproteins. This system resolves very low density lipoproteins, intermediate density lipoproteins, lipoprotein a, and low density lipoproteins in a size-dependent fashion. The characteristic relative mobility of these species can be determined in relation to protein and colloidal gold reference materials. Electron microscopy of selected lipoprotein fractions confirmed that relative mobility was related to apparent lipoprotein diameter. The composite gel medium can be used with prestained lipoproteins and permits immunoelectroblotting for qualitative analysis of apolipoprotein constituents.     

A method for the recovery of DNA from agarose gels.

We describe a quick and versatile method for the isolation of DNA from agarose gels. The DNA is electrophoresed into a trough containing hydroxyapatite, where it is bound. The hydroxyapatite is taken out and the DNA eluted with phosphate buffer. By putting the hydroxyapatite on a small column of Sephadex G50, elution and subsequent removal of phosphate can be performed in one step. The DNA recovered can be used equally well in enzymatic incubations as DNA not purified through agarose gel electrophoresis. Several applications of this technique are described.     

A method for eluting DNA in a wide range of molecular weights from agarose gels

We have developed a simple and rapid method for recovering DNAs of a wide range of molecular weights from agarose gels. A DNA-containing gel slice is placed on a Parafilm sheet in the center of a circular (positive) electrode and covered with a drop of buffer, while a linear (negative) electrode is placed on the top of the gel and driven about 1 mm into the gel itself. When a continuous current is applied, the DNA migrates into the buffer toward the circular electrode. We have obtained almost total recovery of DNAs up to 10 kb in size. Our method may also be used, under appropriate conditions, for higher molecular weight DNAs. The yield and all the biological assays performed on the DNAs obtained by our method recommend it for routine laboratory use.