Spatially well-defined binary brushes of poly(ethylene glycol)s for micropatterning of active proteins on anti-fouling surfaces

We report a novel method for micropatterning of active proteins on anti-fouling surfaces via spatially well-defined and dense binary poly(ethylene glycol)s (PEGs) brushes with controllable protein-docking sites. Binary brushes of poly(poly(ethylene glycol) methacrylate-co-poly(ethylene glycol)methyl ether methacrylate), or P(PEGMA-co-PEGMEMA), and poly(poly(ethylene glycol)methyl ether methacrylate), or P(PEGMEMA), were prepared via consecutive surface-initiated atom transfer radical polymerizations (SI-ATRPs) from a resist-micropatterned Si(100) wafer surface. The terminal hydroxyl groups on the side chains of PEGMA units in the P(PEGMA-co-PEGMEMA) microdomains were activated directly by 1,1'-carbonyldiimidazole (CDI) for the covalent coupling of human immunoglobulin (IgG) (as a model active protein). The resulting IgG-coupled PEG microdomains interact only and specifically with target anti-IgG, while the other PEG microregions effectively prevent specific and non-specific protein fouling. When extended to other active biomolecules, microarrays for specific and non-specific analyte interactions with a high signal-to-noise ratio could be readily tailored.     

Controlling the reactivity of ampiphilic quantum dots in biological assays through hydrophobic assembly of custom PEG derivatives

Modifications of the quantum dot (QD) surface are routinely performed via covalent biomolecule attachment, and poly(ethylene glycol) (PEG) derivatization has previously been shown to limit nonspecific cellular interactions of QD probes. Attempts to functionalize ampiphilic QDs (AMP-QDs) with custom PEG derivatives having a hydrophobic terminus resulted in self-assembly of these PEG ligands to the AMP-QD surface in the absence of covalent coupling reagents. We demonstrate, via electrophoretic characterization techniques, that these self-assembled PEG-QDs exhibit improved passivation in biological environments and are less susceptible to unwanted protein adsorption to the QD surface. We highlight the artifactual fluorescent response protein adsorption can cause in biological assays, and discuss considerations for improved small molecule presentation to facilitate specific QD interactions.     

RGD-grafted poly-L-lysine-graft-(polyethylene glycol) copolymers block non-specific protein adsorption while promoting cell adhesion

A novel class of surface-active copolymers is described, designed to protect surfaces from nonspecific protein adsorption while still inducing specific cell attachment and spreading. A graft copolymer was synthesized, containing poly-(L-lysine) (PLL) as the backbone and substrate binding and poly(ethylene glycol) (PEG) as protein adsorption-resistant pendant side chains. A fraction of the grafted PEG was pendantly functionalized by covalent conjugation to the peptide motif RGD to induce cell binding. The graft copolymer spontaneously adsorbs from dilute aqueous solution onto negatively charged surfaces. The performance of RGD-modified PLL-g-PEG copolymers was analyzed in protein adsorption and cell culture assays. These coatings efficiently blocked the adsorption of serum proteins to Nb(2)O(5) and tissue culture polystyrene while specifically supporting attachment and spreading of human dermal fibroblasts. This surface functionalization technology is expected to be valuable in both the biomaterial and biosensor fields, because different signals can easily be combined, and sterilization and application are straightforward and cost-effective.     

Interaction forces and morphology of a protein-resistant poly(ethylene glycol) layer

The molecular interactions on a protein-resistant surface coated with low-molecular-weight poly(ethylene glycol) (PEG) copolymer brushes are investigated using the extended surface forces apparatus. The observed interaction force is predominantly repulsive and nearly elastic. The chains are extended with respect to the Flory radius, which is in agreement with qualitative predictions of scaling theory. Comparison with theory allows the determination of relevant quantities such as brush length and adsorbed mass. Based on these results, we propose a molecular model for the adsorbed copolymer morphology. Surface-force isotherms measured at high resolution allow distinctive structural forces to be detected, suggesting the existence of a weak equilibrium network between poly(ethylene glycol) and water--a finding in accordance with the remarkable solution properties of PEG. The occurrence of a fine structure is interpreted as a water-induced restriction of the polymer's conformational space. This restriction is highly relevant for the phenomenon of PEG protein resistance. Protein adsorption requires conformational transitions, both in the protein as well as in the PEG layer, which are energetically and kinetically unfavorable.     

Chemical camouflage of nanospheres with a poorly reactive surface: towards development of stealth and target-specific nanocarriers

A two-step approach is described to chemically camouflage the inert surface of model polystyrene nanospheres of 60 nm in diameter against recognition by the body's defenses. The first step was based on the strong protein adsorbing potency of polystyrene, and the second step utilized the chemical reactivity of the adsorbed proteins for conjugation with cyanuric chloride-activated methoxypoly(ethyleneglycol)5000, mPEG5000. Bovine serum albumin (BSA) and rat IgG were used as models of non-immune and immune proteins, respectively. The maximum adsorbance values for both proteins were near expectation for a close-packed monolayer. Adsorption isotherms studies and analysis of the hydrodynamic thickness of the adsorbed protein layer confirmed the close-packed side-on mode of adsorption for BSA and the end-on mode of adsorption for IgG, respectively. Nucleophiles on the adsorbed proteins were then reacted with cyanuric chloride activated mPEG5000. The average poly(ethyleneglycol) (PEG) content for a 60-nm nanospheres was found to be 13.7+/-0.4 micromol PEG/micromol BSA and 3.6+/-0.3 micromol PEG/micromol IgG. The interaction of both PEG-bearing nanospheres with the hydrophobic column material octyl-agarose indicated surface heterogeneity among the nanospheres. Only nanospheres with the most hydrophilic phenotype (approximately 70% of the total population) exhibited stealth properties after intravenous injection to rats. In contrast to the described approach, incubation of uncoated nanospheres with preformed BSA-mPEG5000 conjugates failed to produce long circulating entities. For design of splenotropic particles cyanuric chloride-activated mPEG5000 was conjugated to BSA-coated polystyrene beads of 225 nm in diameter. Despite their stealth property to hepatic Kupffer cell recognition, these nanospheres were cleared by the splenic red pulp macrophages.     

Evaluation of liquid chromatography column retentivity using macromolecular probes. IV. Poly(ethylene glycol) bonded phase

Interaction properties of the novel HPLC silica gel-poly(ethylene glycol) (PEG) bonded phase were evaluated applying polymeric test substances, viz. polystyrenes, poly(methyl methacrylate)s, poly(ethylene oxide)s and poly(2-vinyl pyridine)s, and eluents of different polarities. Silanols on the silica gel surface are well shielded by the PEG phase, and silanophilic adsorption of macromolecules is suppressed in comparison with most silica C(18) bonded phases. The adsorption of solutes on the -OH groups of the PEG phase seems to be low as well. The partition of macromolecules in favor of the PEG phase is inferior to that observed in case of the silica C(18) phases. The volume of the PEG bonded phase is small and it is supposed that the PEG chains assume flat conformation on the silica gel surface.     

Comparison of coatings from reactive star shaped PEG-stat-PPG prepolymers and grafted linear PEG for biological and medical applications

Grafting of poly(ethylene glycol) (PEG) is a common strategy for reducing nonspecific interactions of surfaces with proteins. We have used grafting at "cloud point" solution conditions that ensures maximum grafting density of linear methoxy terminated PEG-aldehyde (mPEG-ald, M(w) = 5000 and 30000). In an alternative approach, surfaces were modified with layers prepared from isocyanate terminated, star shaped poly(ethylene glycol-stat-propylene glycol) prepolymers (80% ethylene glycol, six arms, M(w) = 3000, 12,000, and 18,000; this compound will be referred to as "Star PEG" in the text). Due to the highly reactive endgroups, these molecules form a dense network on the substrate with a high polymer surface coverage. The two systems were compared regarding their ability to prevent unspecific adsorption of insulin and lysozyme. The layers were analyzed by ellipsometry, contact angle measurements, and XPS. Protein adsorption was monitored by surface MALDI-TOF MS and fluorescence microscopy. No protein adsorption could be detected on Star PEG coatings and on mPEG-ald 5000, whereas mPEG-ald 30,000 could only prevent adsorption of lysozyme but not of the smaller insulin.     

The influence of poly(ethylene glycol) on the molecular dynamics within the glycocalyx

Interaction of polymers with cell surfaces is a question of general interest for cell aggregation and fusion. The molecular dynamics within the surface coat of human erythrocytes as well as alterations of membrane protein arrangement (IMPs) in the presence of poly(ethylene glycol) (PEG) were investigated by EPR spin labeling techniques and freeze-fracture electron microscopy, respectively. AT PEG concentrations which induce aggregation of erythrocytes the surface coat and the protein arrangement is not disturbed by the polymer. This implicate an exclusion of the polymer from the cell surface.     

Protein fouling resistant membrane prepared by amphiphilic pegylated polyethersulfone

A mild and facile grafting of poly(ether glycol) methyl ether methacrylate (PEGMA) monomers onto polyethersulfone (PES) was carried out. Then, the PES-g-PEGMA membranes with integrally anisotropic morphology were fabricated through the coupling of non-solvent induced phase inversion and surface segregation. Compared with PES control membrane, the surface hydrophilicity of PES-g-PEGMA membranes was remarkably enhanced due to the drastic enrichment of poly(ethylene glycol) (PEG) segments on the membrane surface; protein adsorption was significantly inhibited due to the hydrogen bonding interactions between hydrophilic groups and water molecules. Ultrafiltration experiments were used to assess the permeability and protein fouling resistance of the PES-g-PEGMA membranes. It was found that the PES-g-PEGMA membranes with higher surface coverage of PEG segments displayed stronger antibiofouling property. Moreover, the stable antibiofouling property for PES-g-PEGMA membranes was acquired due to covalent bonding interactions between hydrophilic PEGMA side chains and PES main chains.     

Antibody linking to atomic force microscope tips via disulfide bond formation

Covalent binding of bioligands to atomic force microscope (AFM) tips converts them into monomolecular biosensors by which cognate receptors can be localized on the sample surface and fine details of ligand-receptor interaction can be studied. Tethering of the bioligand to the AFM tip via a approximately 6 nm long, flexible poly(ethylene glycol) linker (PEG) allows the bioligand to freely reorient and to rapidly "scan" a large surface area while the tip is at or near the sample surface. In the standard coupling scheme, amino groups are first generated on the AFM tip. In the second step, these amino groups react with the amino-reactive ends of heterobifunctional PEG linkers. In the third step, the 2-pyridyl-S-S groups on the free ends of the PEG chains react with protein thiol groups to give stable disulfide bonds. In the present study, this standard coupling scheme has been critically examined, using biotinylated IgG with free thiols as the bioligand. AFM tips with PEG-tethered biotin-IgG were specifically recognized by avidin molecules that had been adsorbed to mica surfaces. The unbinding force distribution showed three maxima that reflected simultaneous unbinding of 1, 2, or 3 IgG-linked biotin residues from the avidin monolayer. The coupling scheme was well-reproduced on amino-functionalized silicon nitride chips, and the number of covalently bound biotin-IgG per microm2 was estimated by the amount of specifically bound ExtrAvidin-peroxidase conjugate. Coupling was evidently via disulfide bonds, since only biotin-IgG with free thiol groups was bound to the chips. The mechanism of protein thiol coupling to 2-pyridyl-S-S-PEG linkers on AFM tips was further examined by staging the coupling step in bulk solution and monitoring turnover by release of 2-pyridyl-SH which tautomerizes to 2-thiopyridone and absorbs light at 343 nm. These experiments predicted 10(3)-fold slower rates for the disulfide coupling step than actually observed on AFM tips and silicon nitride chips. The discrepancy was reconciled by assuming 10(3)-fold enrichment of protein on AFM tips via preadsorption, as is known to occur on comparable inorganic surfaces.     

Antioxidant effects of chrysin-loaded electrospun nanofibrous mats on proliferation and stemness preservation of human adipose-derived stem cells

An ideal biomaterial in regenerative medicine should be able to regulate the stem cell proliferation without the loss of its pluripotency. Chrysin (Chr) is a naturally occurring flavone with a wide spectrum of biological functions including anti-inflammatory and anti-oxidant properties. The present study describes the influence of Chr-loaded nanofibrous mats on the regulation of proliferation and stemness preservation of adipose-derived stem cells (ADSCs). For this purpose, Chr-loaded poly (ε-caprolactone)/poly (ethylene glycol) (PCL/PEG) nanofibrous mats were produced via electrospinning process and the successful fabrication of these bioactive mats was confirmed by field emission scanning electron microscopy (FE-SEM) and fourier transform infrared spectroscopy. ADSCs were seeded on the nanofibers and their morphology, viability, and stemness expression were analyzed using FE-SEM, MTT, and qPCR assays after 2 weeks of incubation, respectively. The results display that ADSCs exhibit better adhesion and significantly increased viability on the Chr-loaded PCL/PEG nanofibrous mats in relative to the PCL/PEG nanofibers and tissue culture polystyrene. The greater viability of ADSCs on Chr based nanofibers was further confirmed by higher expression levels of stemness markers Sox-2, Nanog, Oct-4, and Rex-1. These findings demonstrate that Chr-loaded PCL/PEG electrospun nanofibrous mats can be applied to improve cell adhesion and proliferation while concurrently preserving the stemness of ADSCs, thus representing a hopeful potential for application in stem cell therapy strategies.     

Contact angle, WAXS, and SAXS analysis of poly(beta-hydroxybutyrate) and poly(ethylene glycol) block copolymers obtained via Azotobacter vinelandii UWD

This study investigated and correlated physical properties and cell interactions of copolymers obtained by a poly(ethylene glycol) (PEG)-modulated fermentation of Azotobacter vinelandii UWD. PEGs with molecular weights of 400 and 3400 Da and di(ethylene glycol) (DEG) were used to modulate the bacterial synthesis of poly(beta-hydroxybutyrate) (PHB). The PHB crystallinity was determined by wide-angle X-ray scattering (WAXS). Small-angle X-ray scattering (SAXS) showed that lamellar distances decreased between the PHB and the PHB modulated with PEG or DEG. Furthermore, the contact angle of water on the PHB/PEG polymer surfaces decreased when compared to that of PHB. The significant decrease of the contact angle and corresponding increase in surface tension, as well as significant decrease in cell adhesion, suggest the presence of hydrophilic PEG and DEG within the hydrophobic surface.     

High temperature biocatalysis by chemically modified cytochrome C

Chemically modified cytochrome c with poly(ethylene glycol) (PEG) showed activity at temperatures higher than 100 degrees C and to be highly thermostable. The molecular size of PEG moieties and the coupling site affected the thermal stabilization. An optimal PEG/protein mass ratio of 2.8 was found, producing a fully thermostable biocatalyst at 80 degrees C. Site-directed mutagenesis on yeast cytochrome c showed an increased thermostabilization when lysine 79 residue, localized at the edge of the active site, was replaced by a nonreactive residue. Tertiary, secondary, and active-site structures were analyzed by fluorescence, CD, and UV/visible spectroscopies. Besides its disordered structure, the pegylated protein showed a lower unfolding rate at the active-site than the unmodified ones. A shell-like structure seems to protect the heme environment, in which PEG is coiled on the protein surface with a primary shield of rigid water molecules solvating the hydrophilic region of bound-PEG, and the PEG hydrophobic regions interacting with the hydrophobic clusters on protein surface.     

Hybrid virus-polymer materials. 1. Synthesis and properties of PEG-decorated cowpea mosaic virus

Cowpea mosaic virus was derivatized with poly(ethylene glycol) to give well-controlled loadings of polymer on the outer surface of the coat protein assembly. The resulting conjugates displayed altered densities and immunogenicities, consistent with the known chemical and biological properties of PEG. These studies make CPMV potentially useful as a tailored vehicle for drug delivery.     

Targeted Delivery of Drugs and DNA with Liposomes

Abstract

This presentation is divided into three parts: long-circulating liposomes, immunoliposomes and gene transfer with liposomes. The mechanism of action for the poly(ethylene glycol)-phospholipid conjugates to prolong the circulation time of liposomes can be understood on the basis of steric barrier activity imposed by the flexible PEG chains on the liposome surface. The action of ganglioside GM₁, on the other hand, probably involves specific interactions with serum protein(s). Immunoliposomes can efficiently bind with the target only if the target is readily accessible and the liposomes stay in the circulation for a relatively long period of time. Coating the liposome surface with PEG chains or GM₁ enhances the target binding of immunoliposomes, except when PEG of greater than 5000 dalton is used. In this case, immunoliposome binding to the target is sterically hindered by the long PEG chains. To overcome the problem, antibody molecule is conjugated to the distal end of the PEG chain. This approach works well except that the liver uptake of immunoliposomes is somewhat enhanced. For the delivery of DNA into cells, a novel cationic amphiphile (DC-chol) is synthesized and is now used in clinical trials of gene therapy for melanoma. Current effort is concentrated on the means to enhance the level and duration of transgene expression.     

Mechanism of poly(ethylene glycol) interaction with proteins

Poly(ethylene glycol) (PEG) is one of the most useful protein salting-out agents. In this study, it has been shown that the salting-out effectiveness of PEG can be explained by the large unfavorable free energy of its interaction with proteins. Preferential interaction measurements of beta-lactoglobulin with poly(ethylene glycols) with molecular weights between 200 and 1000 showed preferential hydration of the protein for those with Mr greater than or equal to 400, the degree of hydration increasing with the increase in poly(ethylene glycol) molecular weight. The preferential interaction parameter had a strong cosolvent concentration dependence, with poly(ethylene glycol) 1000 having the sharpest decrease with an increase in concentration. The preferential hydration extrapolated to zero cosolvent concentration increased almost linearly with increasing size of the additive, suggesting steric exclusion as the major factor responsible for the preferential hydration. The poly(ethylene glycol) concentration dependence of the preferential interactions could be explained in terms of the nonideality of poly(ethylene glycol) solutions. All the poly(ethylene glycols) studied, when used at levels of 10-30%, decreased the thermal stability of beta-lactoglobulin, suggesting that caution must be exercised in the use of this additive at extreme conditions such as high temperature.     

Effect of additives on the release of a model protein from PLGA microspheres

The purpose of this study was to investigate the effect of 2 additives, poly(ethylene glycol (PEG) 1000 and 1,2,3-tridecanoyl glycerol (tricaprin), on the physico-chemical characteristics and in vitro release of a model protein, bovine serum albumin (BSA), form poly(D,L-lactic-co-glycolic acid) (PLGA) microspheres. BSA-loaded microspheres were prepared by the double emulsion solvent evaporation method. Additives were incorporated into microspheres to modify the release of protein. The addition of PEG 1000 and tricaprin changed the surface characteristics of microspheres from smooth and nonporous to porous and dimpled, respectively. The in vitro release profiles showed that the additives significantly (P<0.05) increased the early-stage release of BSA from microspheres.     

Synthesis of protein-loaded hydrogel particles in an aqueous two-phase system for coincident antigen and CpG oligonucleotide delivery to antigen-presenting cells

Materials that effectively deliver protein antigens together with activating ligands to antigen-presenting cells are sought for improved nonviral vaccines. To this end, we synthesized protein-loaded poly(ethylene glycol) (PEG)-based hydrogel particles by cross-linking PEG within the polymer-rich phase of an emulsion formed by a poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) triblock copolymer in saturated aqueous salt solution. These particles (500-nm diameter) contained high levels of encapsulated protein (approximately 75% of dry mass), which was selectively released by proteolytic enzymes normally present in the phagosomal/endosomal compartments of dendritic cells (DCs). For co-delivery of cellular activation signals, gel particles were surface-modified by sequential adsorption of poly(l-arginine) and CpG oligonucleotides. DCs pulsed with protein-loaded particles activated na?ve T cells in vitro approximately 10-fold more efficiently than DCs incubated with soluble protein. This organic solvent-free strategy for protein encapsulation within submicron-sized hydrophilic particles is attractive for macromolecule delivery to a variety of phagocytic and nonphagocytic cells.     

Preparation of peptide-loaded polymer microparticles using supercritical carbon dioxide

In this study, peptide-loaded microparticles were prepared using an aerosol solvent extraction system (ASES) by employing supercritical carbon dioxide as an antisolvent. The effects of the molecular weight of poly(Llactide) (PLLA), poly(ethylene glycol) (PEG), the block length of methoxy poly(ethylene glycol)-b-poly(L-lactide) (mPEG-PLLA), the blending of PLLA and PEG, and the drug-to-polymer feed ratio on the formation of leuprolide acetate (LA)-loaded microparticles and their release characteristics were investigated. Scanning electron microscope observations showed that the LA-loaded polymer particles had a spherical morphology with a smooth surface. The entrapment efficiency of LA in the ASES-processed microparticles was found to be extremely high (about 99%), whereas the initial release rate of the LA-loaded microparticles was very low for PLLA. The release rate of LA was observed to increase as the PEG block length of mPEG-PLLA and/or the drug content in the microparticles increased. When PLLA was blended with PEG, the release rate of LA from the PLLA/PEG microparticles was significantly faster compared with the corresponding mPEG-PLLA copolymer.