Distribution of 3H-proline within transseptal fibers of the rat following release of orthodontic forces

Maxillary right first molar teeth of rats were tipped mesially with an orthodontic appliance for 2 weeks (experimental group), 3H-proline was injected, and orthodontic forces were removed 6 hr later (time 0). The contralateral molar teeth of treated (internal control group) and age- and weight-matched untreated animals (external control group) were also studied. Diastemata were created between the molar teeth by the orthodontic appliance, and transseptal fibers between first and second (P less than 0.001) and second and third molars (P less than 0.005) were significantly lengthened as compared to external and internal controls at time 0. Diastemata between molar teeth were closed 5 days after removal of orthodontic force. Transseptal fibers adjacent to the source of the orthodontic force (mesial region) had the highest mean number of 3H-proline-labeled proteins at time 0 and at all times following removal of the force (P less than 0.001), and had the highest rate of labeled protein removal (P less than 0.001). Half-lives for removal of 3H-proline-labeled transseptal fiber proteins were significantly greater in mesial and distal regions and significantly less in middle regions of experimentals than in corresponding regions of external controls (P less than 0.001). These data suggest the following: 1) transseptal fibers adjust their length by rapid remodeling in regions experiencing a tensile force; 2) collagenous protein turnover within the middle third of the transseptal fibers is more rapid subsequent to release of orthodontic force than during normal physiologic drift, suggesting that this region adapts rapidly to changes in adjacent tooth position and that these fibers do not play a significant role in relapse of orthodontically relocated teeth; and 3) significant differences in turnover rates of 3H-proline-labeled transseptal ligament proteins of external and internal control quadrants suggest that tooth movement produces both local and systemic effects on collagenous protein metabolism.     

Upper Airway Changes after Orthodontic Extraction Treatment in Adults: A Preliminary Study using Cone Beam Computed Tomography

Objective

Whether the orthodontic treatment with premolar extraction and maximum anchorage in adults will lead to a narrowed upper airway remains under debated. The study aims to investigate the airway changes after orthodontic extraction treatment in adult patients with Class II and hyperdivergent skeletal malocclusion.

Materials and Methods

This retrospective study enrolled 18 adults with Class II and hyperdivergent skeletal malocclusion (5 males and 13 females, 24.1 ± 3.8 years of age, BMI 20.33 ± 1.77 kg/m²). And 18 untreated controls were matched 1:1 with the treated patients for age, sex, BMI, and skeletal pattern. CBCT images before and after treatment were obtained. DOLPHIN 11.7 software was used to reconstruct and measure the airway size, hyoid position, and craniofacial structures. Changes in the airway and craniofacial parameters from pre to post treatment were assessed by Wilcoxon signed rank test. Mann-Whitney U test was used in comparisons of the airway parameters between the treated patients and the untreated controls. Significant level was set at 0.05.

Results

The upper and lower incisors retracted 7.87 mm and 6.10 mm based on the measurement of U1-VRL and L1-VRL (P < 0.01), while the positions of the upper and lower molars (U6-VRL, and L6-VRL) remained stable. Volume, height, and cross-sectional area of the airway were not significantly changed after treatment, while the sagittal dimensions of SPP-SPPW, U-MPW, PAS, and V-LPW were significantly decreased (P < 0.05), and the morphology of the cross sections passing through SPP-SPPW, U-MPW, PAS, and V-LPW became anteroposteriorly compressed (P <0.001). No significant differences in the airway volume, height, and cross-sectional area were found between the treated patients and untreated controls.

Conclusions

The airway changes after orthodontic treatment with premolar extraction and maximum anchorage in adults are mainly morphological changes with anteroposterior dimension compressed in airway cross sections, rather than a decrease in size.     

Begg矫治器和直丝弓矫治器联合治疗安氏Ⅱ类1 分类错颌畸形的临床 疗效分析

目的:探讨Begg矫治器和直丝弓矫治器联合治疗安氏Ⅱ类1分类错颌畸形的临床疗效。方法:采取回顾性分析方法,调阅2010-2013年徐州矿务集团总医院安氏Ⅱ类1分类错颌畸形患者病历资料,选择病历资料完整且符合本研究要求的正畸病人病历44例进行分析,实验组22例为Begg矫治器和直丝弓矫治器联合治疗组,对照组22例为单纯直丝弓治疗组。对治疗前后的头影测量片进行扫描分析,对治疗时间及辅助支抗应用情况进行统计分析。结果:治疗完成时,Begg矫治器和直丝弓矫治器联合治疗组和单纯直丝弓治疗组的前牙覆合覆盖均减少,上切牙切缘均向远中移动,上下磨牙均伸长,前下面高度均增加,两组治疗结束后硬组织的变化无统计学差异(P0.05)。Begg矫治器和直丝弓矫治器联合治疗组与单纯直丝弓治疗组相比,治疗时间短,使用辅助支抗少,差异具有统计学意义(P0.05)。结论:Begg矫治器和直丝弓矫治器联合矫治安氏Ⅱ类1分类错颌畸形是临床上一种速度快,费用低,效果优的治疗方法。     

安氏Ⅰ类错合拔牙与非拔牙矫治对口唇形态影响的研究

目的：研究安氏Ⅰ类错合拔牙与非拔牙矫治对口唇形态的影响。方法：从直丝弓矫治的AngleⅠ类错合患者治疗前后的X线侧位片中随机选取拔除4个第一前磨牙患者15例（A组）,非拔牙矫治患者15例（B组）,经X线头影软组织测量分析比较矫治前后拔牙组与非拔牙组口唇形态的变化,对所得数据进行统计学处理。结果：拔牙矫治后上下唇的突度有明显改善,平均减少1.42和2.03mm;上下唇的长度也平均增加0.51和1.58mm;非拔牙矫治患者治疗后鼻唇角、下唇突度、上下唇长度均有增加,但矫治前后无统计学差异。结论：拔牙矫治有利于减小上下唇突度从而改善软组织侧貌。     

安氏I类错合拔牙与非拔牙矫治对口唇形态影响的研究

目的:研究安氏Ⅰ类错合拔牙与非拔牙矫治对口唇形态的影响.方法:从直丝弓矫治的Angle Ⅰ类错合患者治疗前后的X线侧位片中随机选取拔除4个第一前磨牙患者15例(A组),非拔牙矫治患者15例(B组),经X线头影软组织测量分析比较矫治前后拔牙组与非拔牙组口唇形态的变化,对所得数据进行统计学处理.结果:拔牙矫治后上下唇的突度有明显改善,平均减少1.42和2.03 mm;上下唇的长度也平均增加0.51和1.58 mm;非拔牙矫治患者治疗后鼻唇角、下唇突度、上下唇长度均有增加,但矫治前后无统计学差异.结论:拔牙矫治有利于减小上下唇突度从而改善软组织侧貌.

Abstract：

Objictive: To investigate the effect of Angle Class Ⅰ malocclusion after orthodontic treatment, with and without extractions on lip position changes. Methods: 30 patients with Angle Class Ⅰ malocclusion were chosen. 15 patients were treated by 4 first-premolars extraction (Group A) and 15 patients were treated without extraction (Group B). The soft tissue X-ray cephalometric of the patients were measured before and after the treatment and compared statistically. Results: After the extraction treatment, the upper and lower projecting lip reduced by 1.42 mm and 2.03, mmrespectively. The length of the upper and lower lips increased by 0.51mm and 1.58mm, respectively. For the group B, the nasolabial angle, the lower lip protrusion, the length of upper and lower lips had been increased, though there had no statistical significance before and after treatment. Conclusions: After extraction treatment the upper and lower projecting lips decreased. The patients with extractment treatment had the facial aesthelics.     

Frequency of premolar teeth extractions for orthodontic treatment

It is of interest to evaluate the frequency of premolar extractions during orthodontic treatment in patients reporting to the Saveetha dental hospital in Chennai from 2019-2020. We used the records from 987 patients who underwent orthodontic treatment from June 2019 to March 2020 in a dental hospital for this analysis. Digital case records of patients who underwent therapeutic extractions of premolars were isolated. A sample dataset of 340 case records were selected for this study. Data shows that 34.4% of subjects underwent premolar extractions amongst a total of 987 subjects who underwent orthodontic treatment. 89.4% of patients were Angle''s Class I malocclusion patients, and the rest were Class II patients. However, no premolar extractions were done in Class III patients. Data also shows that 67.1% of subjects underwent all 4 first premolar extractions and 13.2% underwent only upper first premolar extractions. Thus, a significant association was found between Type of Malocclusion and the Type of premolar extractions with p < 0.05. Moreover, only 34.4% of patients underwent premolar extractions and the majority of them underwent all 4 first premolar extractions.     

Occlusal and morphogenetic field evolution in the dentition of European Nyctitheriidae (Euarchonta,Mammalia)

Abstract

The nyctithere genera Saturninia, Cryptotopos and members of the subfamily Amphidozotheriinae are well-represented by dental remains in the European later Eocene. Their molar occlusal relations are described in detail, demonstrating a diversity of adaptations to insectivory, including dilambdodonty, minor trends in zalambdodonty, development of a large talon shelf in upper first and second molars and a step in the trigon-trigonid shearing surface that provides an extra facet in buccal phase. Minor lingual phase wear is recognized for the first time in the family, but only in relatively worn teeth. Nyctithere molars differ from those of most insectivorous mammals today in having well-developed paraconules and metaconules on upper molars, which in most cases lack a marked bucco-lingual tilt, associated with a more transverse jaw action. Amphidozotherium, however, shows tilting and a basally shifted M¹ hypocone associated with M₁ talonid exodaenodonty and a minor trend in zalambdodonty. Nyctitheres primitively have three deeply notched lobate lower incisors and a large but procumbent premolariform lower canine. Amphidozotheriines have modified their I₃ into a premolariform tooth, by shifting the premolarization field mesially. Amphidozotherium has also shifted this field distally, reducing P_2–3 in size and their roots from two to one.     

Finite element method analysis of the tooth movement induced by orthodontic forces

The finite element method is a useful technique for measuring structural stress and for movement analyses. The objective of this investigation was to get a more accurate estimation of tooth movement depending on application point when a tipping orthodontic force is applied. The three-dimensional model of un upper canine, consisting of 4,000 hexahedron elements with 2,367 nodes was obtained. Horizontal, orally directed 1N tipping orthodontic force was applied to the model on five different levels of the tooth crown. The three-dimensional mathematical finite element model is useful in analyzing the tooth movement in response to orthodontic forces. The tipping tooth movement is greater if the force is applied closer to its neck, or more gingivally.     

Breast MRI in nonpalpable breast lesions: a randomized trial with diagnostic and therapeutic outcome – MONET – study

Background

In orthodontic treatment, anchorage control is a fundamental aspect. Usually conventional mechanism for orthodontic anchorage control can be either extraoral or intraoral that is headgear or intermaxillary elastics. Their use are combined with various side effects such as tipping of occlusal plane or undesirable movements of teeth. Especially in cases, where key-teeth are missing, conventional anchorage defined as tooth-borne anchorage will meet limitations. Therefore, the use of endosseous implants for anchorage purposes are increasingly used to achieve positional stability and maximum anchorage.

Methods/Design

The intended study is designed as a prospective, multicenter randomized controlled trial (RCT), comparing and contrasting the effect of early loading of palatal implant therapy versus implant loading after 12 weeks post implantation using the new ortho-implant type II anchor system device (Orthosystem Straumann, Basel, Switzerland). 124 participants, mainly adult males or females, whose diagnoses require temporary stationary implant-based anchorage treatment will be randomized 1:1 to one of two treatment groups: group 1 will receive a loading of implant standard therapy after a healing period of 12 week (gold standard), whereas group 2 will receive an early loading of orthodontic implants within 1 week after implant insertion. Participants will be at least followed for 12 months after implant placement. The primary endpoint is to investigate the behavior of early loaded palatal implants in order to find out if shorter healing periods might be justified to accelerate active orthodontic treatment. Secondary outcomes will focus e.g. on achievement of orthodontic treatment goals and quantity of direct implant-bone interface of removed bone specimens. As tertiary objective, a histologic and microtomography evaluation of all retrieved implants will be performed to obtain data on the performance of the SLA surface in human bone evaluation of all retrieved implants. Additionally, resonance frequency analysis (RFA, Osstell? mentor) will be used at different times for clinically monitoring the implant stability and for histological comparison in order to measure the reliability of the resonance frequency measuring device.

Trial registration

Current Controlled Trials ISRCTN97142521.     

成年人个别牙早失伴错(牙合)畸形修复前正畸治疗的临床观察

目的:探讨成年人个别牙缺失伴错牙合患者,通过正畸治疗校正错牙合后,修复治疗的疗效情况。方法:对16例成年人个别牙缺失致前牙散在间隙或伴有反牙合患者,采用直丝弓矫治技术进行修复前正畸治疗。结果:16例成年人个别牙缺失伴错牙合畸形的患者经过修复前正畸治疗后,再进行牙列缺损修复治疗,获得了令患者较为满意的疗效,外貌也得到了改善。结论:通过正畸、修复相结合的口腔综合治疗,可以有效地使便利体获得更加完善的口腔功能及美观效果。     

Changes in mitogen-activated protein kinase activity occur in the maize pulvinus in response to gravistimulation and are important for the bending response

The maize (Zea mays L.) pulvinus was used as a model system to study the signalling events that lead to differential growth in response to gravistimulation in plants. The pulvinus functions to return tipped plants to vertical via differential elongation of the cells on its lower side. By performing immunokinase assays using total soluble protein extracts and an antibody against mammalian ERK1, a mitogen‐activated protein kinase (MAPK)‐like activity was assayed in pulvini halves harvested at various time points after tipping. We detected a reproducible alternation of higher levels of activity occurring between the upper and lower halves of the pulvinus between 75 and 180 min after tipping, with a sustained increase in the upper half occurring at the end of the time‐course. This timing roughly corresponds to the presentation time for maize (i.e. the amount of time that the plant needs to be tipped before it is committed to bend), which occurs between 2 and 4 h. Treatment of maize stem explants with an inhibitor of MAPK activation, U0126, led to a reduction in the activity of this kinase, as well as an almost 65% reduction in bending as measured at 20 h. Rinsing out of the inhibitor resulted in recovery of both bending and kinase activity. It is possible that changes in MAPK activity in the gravistimulated pulvinus are part of a signalling cascade that may help to distinguish between minor perturbations in plant orientation and more significant and long‐term changes, and may also help to determine the direction of bending.     

口腔正畸MIA技术对青少年安氏Ⅱ类错[牙合]畸形患者对龈沟液MMP-2表达水平的影响

目的:探讨口腔正畸微螺钉种植体支抗(Microscrew implant anchor,MIA)技术对青少年安氏Ⅱ类错[牙合]畸形患者对龈沟液基质金属蛋白酶(Matrix metalloproteinase,MMP)-2表达水平的影响。方法:2016年1月1日至2019年12月31日选择在本院诊治的青少年安氏Ⅱ类错[牙合]畸形患者86例,根据治疗方法把患者分为MIA组与对照组,各43例,对照组给予头帽口外弓支抗技术结合直丝弓矫治器治疗,MIA组给予MIA技术结合直丝弓矫治器治疗,检测龈沟液MMP-2表达水平变化情况。结果:MIA组正畸后6个月的总有效率为97.7%,显著高于对照组的81.4%(P<0.05)。两组正畸后6个月的SNA角、OB与OJ值低于正畸前,MIA组低于对照组(P<0.05),两组正畸前后SNB角在组内与组间对比差异都无统计学意义(P>0.05)。两组正畸后6个月的龈沟液MMP-2值低于正畸前,MIA组低于对照组(P<0.05)。结论:口腔正畸MIA技术在青少年安氏Ⅱ类错[牙合]畸形患者的应用能抑制龈沟液MMP-2的表达,有利于改善患者的头颅与牙齿的X线指标,从而促进提高治疗效果。     

Wear pattern and functional morphology of dryolestoid molars (Mammalia, Cladotheria)

Pretribosphenic dryolestoid molars are characterized by a reversed triangular alignment of the “primary trigon” (formed by the paracone, metacone and stylocone) and trigonid crucial for the embrasure shearing process. These molars are abraded along the protocristid and paracristid, and show a typical wear pattern with mesially and distally sloping dentine fields due to their thin enamel. The wear pattern of lipotyphlan and didelphid tribosphenic molars with considerably thicker enamel does not show this sloping. In dryolestoid molars two directions of striations occur. Steeper striations oriented linguo-buccally are present on facet 1 below the protocristid, and about 10° less inclined striations of the same direction have been observed near the talonid base. This reflects the railing function of the hypoflexid for the paracone of the corresponding upper molar. Facet 3 in the hypoflexid gets steeper with progressive wear, whereas facets 1 and 2 on the mesial and distal sides of the trigonid are flattened during wear. In the masticatory process the hypoflexid has mainly a shearing function with a crushing component because of its lesser inclination than the functional shearing surfaces below the trigonid crests. Striations on the exposed dentine field along the paracristid and in the guiding groove of facet 3 indicate that these two surfaces were formed by attrition (tooth to tooth contact). The exposed dentine fields at the cusp apices and along the protocristid are gauged and therefore must be a result of abrasion (tooth to food contact).     

微种植体支抗压低上颌磨牙的研究进展

在口腔科诊疗工作中经常会见到因下颌磨牙长期缺失导致对颌磨牙伸长的情况,这将直接导致对颌磨牙修复空间不足。这种病例需要通过压低伸长的上颌磨牙来获取足够的空间,以利于下颌磨牙的修复。另外,高角和开牙合病例要想获得良好的治疗效果也需要通过压低磨牙来进行垂直向控制,因此压低上颌磨牙成为临床工作的重要内容。压低上颌磨牙的方法除了牙合垫、高位牵引头帽、手术等之外,还有微种植体支抗,它又称为"绝对支抗"由钛或合金制成,分为自攻型和助攻型。由于创伤小,植入部位灵活,手术简单,压低磨牙效果显著,所以自临床应用以来得到大力推广。因此本文就微种植体支抗压低上颌磨牙的临床应用、压低效果评价、副作用及防治措施和生物力学研究等方面作一综述。     

Molding of the regenerate in mandibular distraction: clinical experience

Initial clinical experience with distraction osteogenesis has demonstrated the risk of developing postdistraction malocclusion that requires secondary orthodontic correction. In addition, optimal mandibular form is not always achieved. Both animal studies and preliminary clinical investigations have suggested that the regenerate can be successfully "molded" during active mandibular distraction. The authors have applied this concept clinically to obtain a more desirable occlusal relationship in a group of mandibular distraction patients. Eleven patients are described in whom angulation of the distraction device or intermaxillary/interdental elastics were employed to mold the regenerate. Two representative case studies are provided to illustrate the principles. When using elastic traction to close an anterior open bite, care must be taken that extrusion of individual teeth is minimized by distributing the force over the entire dental arch, especially the basilar portions of the jaws. The authors demonstrate that molding of the regenerate can be successfully accomplished not only during device activation but also early in the consolidation period. The outer limit of the time window in which molding is effective remains to be defined.     

A novel method for the three-dimensional (3-D) analysis of orthodontic tooth movement-calculation of rotation about and translation along the finite helical axis.

The purpose of this study was to establish a novel method for evaluating orthodontic tooth movement in three-dimensional (3-D) space. The present system consisted of the following procedures at a given treatment period: (1) 3-D tooth positions were measured with a 3-D surface-scanning system using a slit laser beam; (2) the 3-D shape data were registered automatically at the maxillary first molars, and the coordinate systems were normalized; (3) the rotation matrix and translation vector were calculated from the automatic registration of the two position data for a given tooth; (4) the finite helical axes of teeth were calculated as the locus of zero rotational displacement; and (5) tooth movement was presented as rotation about and translation along the finite helical axis. To test this system, a male patient (age 22 yr 2 months) with Angle Class III malocclusion and moderate crowding of the anterior teeth, who had been treated using a standard multi-bracket appliance, was used as a model case in this study. Impressions for a dental cast model were taken at five phases; immediately before and after application of the appliance, and 10 days, 1 month and 2 months after beginning treatment. The results demonstrated that the present analytical method can more simply describe the movement of a given tooth by rotation about and translation along the finite helical axis, and provides quantitative visual 3-D information on complicated tooth movement during orthodontic treatment.     

Influence of premolar extraction or non-extraction orthodontic therapy on the angular changes of mandibular third molars

AimTo compare the angular changes of the third molars relative to the occlusal plane and to the second molar long axis in extraction group and compare these changes with a non extraction group.Materials and methodsThe study included pre and post treatment panoramic radiograph records of 90 subjects treated by first premolar extractions and 90 subjects who had been treated with non extraction orthodontic therapy (n = 90). Two angular variables were measured. Firstly, the angle between the long axis of the third molar and the occlusal plane (M3–OP) and secondly, the angle between the long axis of the third molar and the long axis of the second molar (M3–M2). Data were analyzed by paired and student’s t-test.ResultThe analyzed data to assess the changes in the third molar angulation from pretreatment to post treatment did not vary significantly in both the groups (p < 0.05). Both the groups showed decreased angular values. The M3–OP angular difference was (−7.3 ± 2.45) in extraction group as compared to (−5.85 ± 1.77) in non extraction group. The M3–M2 angular difference of (−4.26 ± 3.11) in extraction group and (−2.98 ± 1.74) in non-extraction group was observed.ConclusionExtraction of premolars did not demonstrate considerable changes on the angulation of the third molars. The factors other than premolar extractions may influence the angulation of the third molars.     

Orthognathic surgery in cleft patients

LEARNING OBJECTIVES: After studying this article, the participant should be able to: 1. Identify the skeletal changes in the cleft patient that necessitate surgery. 2. Describe the orthodontic principles that precede surgical treatment. 3. Demonstrate the surgical principles involved in cleft orthognathic surgery and how to avoid common pitfalls particular to cleft orthognathic surgery. 4. Anticipate when dentoalveolar distraction can help in the treatment of problems not easily treated with conventional orthognathic techniques. SUMMARY: This CME article covers the basic multidisciplinary approach to the treatment of patients requiring a combined orthodontic orthognathic approach to their skeletally based malocclusion. The dentoskeletal abnormalities are described for these patients, as are the fundamental orthodontic principles in the presurgical treatment of these patients. The basic surgical principles are discussed in general, and the reader is provided with advice on avoiding common pitfalls. Specific attention is given to the more recent advances in dentoalveolar distraction in cases of large defects that would have been difficult to treat using conventional orthognathic surgery. Videos are provided to illustrate the general principles in treating the cleft orthognathic patient and to illustrate the treatment of large defects using dentoalveolar distraction.     

微型种植体支抗在青少年口腔正畸治疗中的效果及安全性

目的:研究微型种植体支抗治疗青少年口腔正畸的疗效及安全性。方法:选择2013年5月-2015年5月在我院接受治疗的80例青少年口腔正畸患者,随机分为试验组和对照组。试验组给予微型种植体支抗治疗,对照组给予传统正畸治疗。观察并比较两组患者的临床疗效、不良反应及头影测量结果。结果:试验组患者的上、中切牙倾角差、上中切牙凸距差、磨牙移位的改善情况均明显高于对照组,差异有统计学意义(P0.05);与治疗前比较,两组患者治疗后U1-L1、U1-SN、L1-MP、U1-NA、L1-NB、SNA、SNB及ANB差值均有统计学意义(P0.05);试验组U1-L1、SNB显著大于对照组,其他指标均显著小于对照组,差异具有统计学意义(P0.05);试验组患者不良反应的发生率明显低于对照组,差异具有统计学意义(P0.05)。结论:与传统支抗方法相比,微型种植体支抗用于青少年口腔正畸治疗具有操作简便、疗效显著、安全性较高等优点,适合在临床推广使用。