Structure of the LpxC deacetylase with a bound substrate-analog inhibitor

The zinc-dependent UDP-3-O-acyl-N-acetylglucosamine deacetylase (LpxC) catalyzes the first committed step in the biosynthesis of lipid A, the hydrophobic anchor of lipopolysaccharide (LPS) that constitutes the outermost monolayer of Gram-negative bacteria. As LpxC is crucial for the survival of Gram-negative organisms and has no sequence homology to known mammalian deacetylases or amidases, it is an excellent target for the design of new antibiotics. The solution structure of LpxC from Aquifex aeolicus in complex with a substrate-analog inhibitor, TU-514, reveals a novel alpha/beta fold, a unique zinc-binding motif and a hydrophobic passage that captures the acyl chain of the inhibitor. On the basis of biochemical and structural studies, we propose a catalytic mechanism for LpxC, suggest a model for substrate binding and provide evidence that mobility and dynamics in structural motifs close to the active site have key roles in the capture of the substrate.     

Mechanistic inferences from the binding of ligands to LpxC, a metal-dependent deacetylase

The metal-dependent deacetylase LpxC catalyzes the first committed step of lipid A biosynthesis in Gram-negative bacteria. Accordingly, LpxC is an attractive target for the development of inhibitors that may serve as potential new antibiotics for the treatment of Gram-negative bacterial infections. Here, we report the 2.7 A resolution X-ray crystal structure of LpxC complexed with the substrate analogue inhibitor TU-514 and the 2.0 A resolution structure of LpxC complexed with imidazole. The X-ray crystal structure of LpxC complexed with TU-514 allows for a detailed examination of the coordination geometry of the catalytic zinc ion and other enzyme-inhibitor interactions in the active site. The hydroxamate group of TU-514 forms a bidentate chelate complex with the zinc ion and makes hydrogen bond interactions with conserved active site residues E78, H265, and T191. The inhibitor C-4 hydroxyl group makes direct hydrogen bond interactions with E197 and H58. Finally, the C-3 myristate moiety of the inhibitor binds in the hydrophobic tunnel of the active site. These intermolecular interactions provide a foundation for understanding structural aspects of enzyme-substrate and enzyme-inhibitor affinity. Comparison of the TU-514 complex with cacodylate and imidazole complexes suggests a possible substrate diphosphate binding site and highlights residues that may stabilize the tetrahedral intermediate and its flanking transition states in catalysis. Evidence of a catalytic zinc ion in the native zinc enzyme coordinated by H79, H238, D242, and two water molecules with square pyramidal geometry is also presented. These results suggest that the native state of this metallohydrolase may contain a pentacoordinate zinc ion, which contrasts with the native states of archetypical zinc hydrolases such as thermolysin and carboxypeptidase A.     

Antibacterial agents that target lipid A biosynthesis in gram-negative bacteria. Inhibition of diverse UDP-3-O-(r-3-hydroxymyristoyl)-n-acetylglucosamine deacetylases by substrate analogs containing zinc binding motifs

UDP-3-O-(R-3-hydroxymyristoyl)-N-acetylglucosamine deacetylase (LpxC) catalyzes the second step in the biosynthesis of lipid A, a unique amphiphilic molecule found in the outer membranes of virtually all Gram-negative bacteria. Since lipid A biosynthesis is required for bacterial growth, inhibitors of LpxC have potential utility as antibiotics. The enzymes of lipid A biosynthesis, including LpxC, are encoded by single copy genes in all sequenced Gram-negative genomes. We have now cloned, overexpressed, and purified LpxC from the hyperthermophile Aquifex aeolicus. This heat-stable LpxC variant (the most divergent of all known LpxCs) displays 32% identity and 51% similarity over 277 amino acid residues out of the 305 in Escherichia coli LpxC. Although A. aeolicus LpxC deacetylates the substrate UDP-3-O-(R-3-hydroxymyristoyl)-N-acetylglucosamine at a rate comparable with E. coli LpxC, a phenyloxazoline-based hydroxamate that inhibits E. coli LpxC with K(i) of approximately 50 nM (Onishi, H. R., Pelak, B. A., Gerckens, L. S., Silver, L. L., Kahan, F. M., Chen, M. H., Patchett, A. A., Galloway, S. M., Hyland, S. A., Anderson, M. S., and Raetz, C. R. H. (1996) Science 274, 980-982) does not inhibit A. aeolicus LpxC. To determine whether or not broad-spectrum deacetylase inhibitors can be found, we have designed a new class of hydroxamate-containing inhibitors of LpxC, starting with the structure of the physiological substrate. Several of these compounds inhibit both E. coli and A. aeolicus LpxC at similar concentrations. We have also identified a phosphinate-containing substrate analog that inhibits both E. coli and A. aeolicus LpxC, suggesting that the LpxC reaction proceeds by a mechanism similar to that described for other zinc metalloamidases, like carboxypeptidase A and thermolysin. The differences between the phenyloxazoline and the substrate-based LpxC inhibitors might be exploited for developing novel antibiotics targeted either against some or all Gram-negative strains. We suggest that LpxC inhibitors with antibacterial activity be termed "deacetylins."     

Kinetic analysis of the zinc-dependent deacetylase in the lipid A biosynthetic pathway

The first committed step of lipid A biosynthesis in Gram-negative bacteria is catalyzed by the zinc-dependent hydrolase LpxC that removes an acetate from the nitrogen at the 2' '-position of UDP-3-O-acyl-N-acetylglucosamine. Recent structural characterization by both NMR and X-ray crystallography provides many important details about the active site environment of LpxC from Aquifex aeolicus, a heat-stable orthologue that displays 32% sequence identity to LpxC from Escherichia coli. The detailed reaction mechanism and specific roles of active site residues for LpxC from A. aeolicus are further analyzed here. The pH dependencies of k(cat)/K(M) and k(cat) for the deacetylation of the substrate UDP-3-O-[(R)-3-hydroxymyristoyl]-GlcNAc are both bell-shaped. The ascending acidic limb (pK(1)) was fitted to 6.1 +/- 0.2 for k(cat) and 5.7 +/- 0.2 for k(cat)/K(M). The descending basic limb (pK(2)) was fitted to 8.0 +/- 0.2 for k(cat) and 8.4 +/- 0.2 for k(cat)/K(M). The pH dependence of the E73A mutant exhibits loss of the acidic limb, and the mutant retains only 0.15% activity versus the wild type. The pH dependencies of the other active site mutants H253A, K227A, H253A/K227A, and D234N remain bell-shaped, although their significantly lower activities (0.25%, 0.05%, 0.007%, and 0.57%, respectively) suggest that they contribute significantly to catalysis. Our cumulative data support a mechanism for LpxC wherein Glu73 serves as the general base for deprotonation and activation of the zinc-bound water.     

A slow, tight-binding inhibitor of the zinc-dependent deacetylase LpxC of lipid A biosynthesis with antibiotic activity comparable to ciprofloxacin

The zinc-dependent enzyme LpxC catalyzes the deacetylation of UDP-3-O-acyl-GlcNAc, the first committed step of lipid A biosynthesis. Lipid A is an essential component of the outer membranes of most Gram-negative bacteria, including Escherichia coli, Salmonella enterica, and Pseudomonas aeruginosa, making LpxC an attractive target for antibiotic design. The inhibition of LpxC by a novel N-aroyl-l-threonine hydroxamic acid (CHIR-090) from a recent patent application (International Patent WO 2004/062601 A2 to Chiron and the University of Washington) is reported here. CHIR-090 possesses remarkable antibiotic activity against both E. coli and P. aeruginosa, comparable to that of ciprofloxacin. The biological activity of CHIR-090 is explained by its inhibition of diverse LpxC orthologues at low nanomolar concentrations, including that of Aquifex aeolicus, for which structural information is available. The inhibition of A. aeolicus LpxC by CHIR-090 occurs in two steps. The first step is rapid and reversible, with a K(i) of 1.0-1.7 nM, depending upon the method of assay. The second step involves the conversion of the EI complex with a half-life of about a minute to a tightly bound form. The second step is functionally irreversible but does not result in the covalent modification of the enzyme, as judged by electrospray ionization mass spectrometry. CHIR-090 is the first example of a slow, tight-binding inhibitor for LpxC and may be the prototype for a new generation of LpxC inhibitors with therapeutic applicability.     

Amphipathic benzoic acid derivatives: synthesis and binding in the hydrophobic tunnel of the zinc deacetylase LpxC

The first committed step in lipid A biosynthesis is catalyzed by uridine diphosphate-(3-O-(R-3-hydroxymyristoyl))-N-acetylglucosamine deacetylase (LpxC), a zinc-dependent deacetylase, and inhibitors of LpxC may be useful in the development of antibacterial agents targeting a broad spectrum of Gram-negative bacteria. Here, we report the design of amphipathic benzoic acid derivatives that bind in the hydrophobic tunnel in the active site of LpxC. The hydrophobic tunnel accounts for the specificity of LpxC toward substrates and substrate analogues bearing a 3-O-myristoyl substituent. Simple benzoic acid derivatives bearing an aliphatic 'tail' bind in the hydrophobic tunnel with micromolar affinity despite the lack of a glucosamine ring like that of the substrate. However, although these benzoic acid derivatives each contain a negatively charged carboxylate 'warhead' intended to coordinate to the active site zinc ion, the 2.25A resolution X-ray crystal structure of LpxC complexed with 3-(heptyloxy)benzoate reveals 'backward' binding in the hydrophobic tunnel, such that the benzoate moiety does not coordinate to zinc. Instead, it binds at the outer end of the hydrophobic tunnel. Interestingly, these ligands bind with affinities comparable to those measured for more complicated substrate analogue inhibitors containing glucosamine ring analogues and hydroxamate 'warheads' that coordinate to the active site zinc ion. We conclude that the intermolecular interactions in the hydrophobic tunnel dominate enzyme affinity in this series of benzoic acid derivatives.     

Binding of uridine 5'-diphosphate in the "basic patch" of the zinc deacetylase LpxC and implications for substrate binding

LpxC is a zinc metalloenzyme that catalyzes the first committed step in the biosynthesis of lipid A, a vital component of the outer membrane of Gram-negative bacteria. Accordingly, the inhibition of LpxC is an attractive strategy for the treatment of Gram-negative bacterial infections. Here, we report the 2.7 A resolution X-ray crystal structure of LpxC from Aquifex aeolicus complexed with uridine 5'-diphosphate (UDP), and the 3.1 A resolution structure of LpxC complexed with pyrophosphate. The X-ray crystal structure of the LpxC-UDP complex provides the first view of interactions likely to be exploited by the substrate UDP group in the "basic patch" of the active site. The diphosphate group of UDP makes hydrogen bond interactions with strictly conserved residue K239 as well as solvent molecules. The ribose moiety of UDP interacts with partially conserved residue E197. The UDP uracil group hydrogen bonds with both the backbone NH group and the backbone carbonyl group of E160, and with the backbone NH group of K162 through an intervening water molecule. Finally, the alpha-phosphate and uracil groups of UDP interact with R143 and R262 through intervening water molecules. The structure of LpxC complexed with pyrophosphate reveals generally similar intermolecular interactions in the basic patch. Unexpectedly, diphosphate binding in both complexes is accompanied by coordination to an additional zinc ion, resulting in the identification of a new metal-binding site termed the E-site. The structures of the LpxC-UDP and LpxC-pyrophosphate complexes provide new insights with regard to substrate recognition in the basic patch and metal ion coordination in the active site of LpxC.     

Catalytic mechanism and molecular recognition of E. coli UDP-3-O-(R-3-hydroxymyristoyl)-N-acetylglucosamine deacetylase probed by mutagenesis

UDP-3-O-(R-3-hydroxymyristoyl)-N-acetylglucosamine deacetylase (LpxC) is a metal-dependent deacetylase that catalyzes the hydrolysis of UDP-3-O-myristoyl-N-acetyl-glucosamine to form UDP-3-O-myristoyl-glucosamine and acetate. This is the committed step in the biosynthesis of lipid A, and therefore, LpxC is a target for the development of antimicrobial agents in the treatment of Gram-negative infections. To facilitate the development of potent and specific inhibitors of LpxC, the molecular determinants of binding and specificity and the catalytic mechanism for this enzyme have been probed. The functions of active site residues have been classified on the basis of changes in steady-state turnover (kcat, KM, and kcat/KM) and product binding affinity (KDProduct). We have identified side chains that enhance product affinity and reactivity (F192, K239, D246, and H265), destabilize product affinity (E78 and D197), and preferentially enhance catalytic efficiency (H19, T19, K143, and N162). In addition, the affinity of LpxC for myrUDP-GlcNH2 is dependent on two ionizations, one deprotonation and one protonation, with apparent pKa values of 6.5 +/- 0.1 and 7.4 +/- 0.1, respectively. The UDP moiety of the product contributes significantly to recognition by LpxC, suggesting that this region can be targeted in drug development. These data provide a map of the active site features essential for catalysis and molecular recognition by LpxC that can be used for developing more potent LpxC inhibitors.     

Crystal structure of A. aeolicus LpxC with bound product suggests alternate deacetylation mechanism

UDP‐3‐O‐acyl‐N‐acetylglucosamine deacetylase (LpxC) is the first committed step to form lipid A, an essential component of the outer membrane of Gram‐negative bacteria. As it is essential for the survival of many pathogens, LpxC is an attractive target for antibacterial therapeutics. Herein, we report the product‐bound co‐crystal structure of LpxC from the acheal Aquifex aeolicus solved to 1.6 Å resolution. We identified interactions by hydroxyl and hydroxymethyl substituents of the product glucosamine ring that may enable new insights to exploit waters in the active site for structure‐based design of LpxC inhibitors with novel scaffolds. By using this product structure, we have performed quantum mechanical modeling on the substrate in the active site. Based on our results and published experimental data, we propose a new mechanism that may lead to a better understanding of LpxC catalysis and inhibition. Proteins 2015; 83:1706–1719. © 2015 Wiley Periodicals, Inc.     

EXAFS studies of the zinc sites of UDP-(3-O-acyl)-N-acetylglucosamine deacetylase (LpxC)

Extended X-ray absorption fine structure (EXAFS) spectroscopy has been used to determine the structure of the Zn(II) sites in UDP-(3-O-acyl)-N-acetylglucosamine deacetylase (LpxC) from Aquifex aeolicus and Pseudomonas aeruginosa. The active site Zn(II) is four coordinate, with exclusively low-Z (nitrogen and oxygen) ligation in both enzymes. The amplitude of the outer-shell scattering from the histidine ligands is best fit using two histidine ligands, suggesting a ZnO(2)(His)(2) site, where O most likely represents a conserved aspartate and a solvent molecule. The same structure was found for Co(II)-substituted A. aeolicus LpxC, although in this case it is possible that the coordination sphere may expand to include a fifth low-Z ligand. EXAFS data were also measured for the Escherichia coli LpxC enzyme. When a single Co(II) is substituted for Zn(II) in the active site of E. coli LpxC, EXAFS data show the same ligand environment as is found for the P. aeruginosa and A. aeolicus enzymes. However, the EXAFS data for E. coli LpxC with two zinc ions bound per protein, with the second Zn(II) acting as an inhibitory metal, demonstrates that the inhibitory metal is bound to at least two high-Z (sulfur, presumably thiolate, or chlorine) ligands. Results of the outer-shell scattering analysis, combined with previous studies of the LpxC enzyme, indicate a novel zinc binding motif not found in any previously studied zinc metalloproteins.     

Site-directed mutagenesis of the bacterial metalloamidase UDP-(3-O-acyl)-N-acetylglucosamine deacetylase (LpxC). Identification of the zinc binding site

UDP-3-O-(acyl)-N-acetylglucosamine deacetylase (LpxC) catalyzes the second step in the biosynthesis of lipid A in Gram-negative bacteria. Compounds targeting this enzyme are proposed to chelate the single, essential zinc ion bound to LpxC and have been demonstrated to stop the growth of Escherichia coli. A comparison of LpxC sequences from diverse bacteria identified 10 conserved His, Asp, and Glu residues that might play catalytic roles. Each amino acid was altered in both E. coli and Aquifex aeolicus LpxC and the catalytic activities of the variants were determined. Three His and one Asp residues (H79, H238, D246, and H265) are essential for catalysis based on the low activities (<0.1% of wild-type LpxC) of mutants with alanine substitutions at these positions. H79 and H238 likely coordinate zinc; the Zn(2+) content of the purified variant proteins is low and the specific activity is enhanced by the addition of Zn(2+). The third side chain to coordinate zinc is likely either H265 or D246 and a fourth ligand is likely a water molecule, as indicated by the hydroxamate inhibition, suggesting a His(3)H(2)O or His(2)AspH(2)O Zn(2+)-polyhedron in LpxC. The decreased zinc inhibition of LpxC mutants at E78 suggests that this side chain may coordinate a second, inhibitory Zn(2+) ion. Given the absence of any known Zn(2+) binding motifs, the active site of LpxC may have evolved differently than other well-studied zinc metalloamidases, a feature that should aid in the design of safe antibiotics.     

Structure based design of an in vivo active hydroxamic acid inhibitor of P. aeruginosa LpxC

Lipid A is an essential component of the Gram negative outer membrane, which protects the bacterium from attack of many antibiotics. The Lipid A biosynthesis pathway is essential for Gram negative bacterial growth and is unique to these bacteria. The first committed step in Lipid A biosynthesis is catalysis by LpxC, a zinc dependent deacetylase. We show the design of an LpxC inhibitor utilizing a robust model which directed efficient design of picomolar inhibitors. Analysis of physiochemical properties drove design to focus on an optimal lipophilicity profile. Further structure based design took advantage of a conserved water network over the active site, and with the optimal lipophilicity profile, led to an improved LpxC inhibitor with in vivo activity against wild type Pseudomonas aeruginosa.     

Exploring the UDP pocket of LpxC through amino acid analogs

Lipopolysaccharide (LPS) biosynthesis is an attractive antibacterial target as it is both conserved and essential for the survival of key pathogenic bacteria. Lipid A is the hydrophobic anchor for LPS and a key structural component of the outer membrane of Gram-negative bacteria. Lipid A biosynthesis is performed in part by a unique zinc dependent metalloamidase, LpxC (UDP-3-O-(R-3-hydroxymyristoyl)-N-acetylglucosamine deacetylase), which catalyzes the first non-reversible step in lipid A biosynthesis. The UDP portion of the LpxC substrate-binding pocket has been relatively unexplored. We have designed and evaluated a series of hydroxamate based inhibitors which explore the SAR of substitutions directed into the UDP pocket with a range of substituted α-amino acid based linkers. We also provide the first wild type structure of Pseudomonas aeruginosa LpxC which was utilized in the design of many of these analogs.     

Crystal structure of LpxC from Pseudomonas aeruginosa complexed with the potent BB-78485 inhibitor

The cell wall in Gram-negative bacteria is surrounded by an outer membrane comprised of charged lipopolysaccharide (LPS) molecules that prevent entry of hydrophobic agents into the cell and protect the bacterium from many antibiotics. The hydrophobic anchor of LPS is lipid A, the biosynthesis of which is essential for bacterial growth and viability. UDP-3-O-(R-3-hydroxymyristoyl)-N-acetylglucosamine deacetylase (LpxC) is an essential zinc-dependant enzyme that catalyzes the conversion of UDP-3-O-(R-3-hydroxymyristoyl)-N-acetylglucosamine to UDP-3-O-(R-3-hydroxymyristoyl)glucosamine and acetate in the biosynthesis of lipid A, and for this reason, LpxC is an attractive target for antibacterial drug discovery. Here we disclose a 1.9 A resolution crystal structure of LpxC from Pseudomonas aeruginosa (paLpxC) in a complex with the potent BB-78485 inhibitor. To our knowledge, this is the first crystal structure of LpxC with a small-molecule inhibitor that shows antibacterial activity against a wide range of Gram-negative pathogens. Accordingly, this structure can provide important information for lead optimization and rational design of the effective small-molecule LpxC inhibitors for successful treatment of Gram-negative infections.     

Design and synthesis of potent Gram-negative specific LpxC inhibitors

Antibiotic resistant hospital acquired infections are on the rise, creating an urgent need for novel bactericidal drugs. Enzymes involved in lipopolysaccharide (LPS) biosynthesis are attractive antibacterial targets since LPS is the major structural component of the outer membrane of Gram-negative bacteria. Lipid A is an essential hydrophobic anchor of LPS and the first committed step in lipid A biosynthesis is catalyzed by a unique zinc dependent metalloamidase, UDP-3-O-(R-3-hydroxymyristoyl)-N-acetylglucosamine deacetylase (LpxC). LpxC is an attractive Gram-negative only target that has been chemically validated by potent bactericidal hydroxamate inhibitors that work by coordination of the enzyme’s catalytic zinc ion. An exploratory chemistry effort focused on expanding the SAR around hydroxamic acid zinc-binding ‘warheads’ lead to the identification of novel compounds with enzyme potency and antibacterial activity similar to CHIR-090.     

Molecular recognition by Escherichia coli UDP-3-O-(R-3-hydroxymyristoyl)-N-acetylglucosamine deacetylase is modulated by bound metal ions

The metal-dependent enzyme UDP-3-O-(R-3-hydroxymyristoyl)-N-acetylglucosamine deacetylase (LpxC) catalyzes the conversion of UDP-3-O-(R-3-hydroxymyristoyl)-N-acetylglucosamine to UDP-3-O-(R-3-hydroxymyristoyl)glucosamine and acetate. This is the committed step in the biosynthesis of lipid A, and for this reason, LpxC is a target for the development of antibiotics in the treatment of Gram-negative bacterial infections. Here we examine the importance of bound metal ion(s) and fatty acids for molecular recognition of ligands by LpxC. The KDproduct value increases >1000-fold with the loss of the hydroxymyristoyl moiety, indicating that the enhanced catalytic efficiency of substrates containing this acyl group is mainly due to increased binding affinity. New fluorescent binding assays for measuring the affinity of LpxC for fatty acids indicate that myristate binds to LpxC 10-fold less tightly than palmitate and that fatty acid affinity is only modestly dependent on pH. Furthermore, LpxC homologues from different species have similar affinities for fatty acids despite alterations in protein sequence. In contrast, the affinity of LpxC for both product and fatty acids is significantly influenced (< or =40-fold) by changes in the number and identity of metal ions bound to the LpxC active site. Therefore, interactions with these metal ions are critical for molecular recognition of ligands by LpxC and may mimic similar contacts with active site inhibitors. These data indicate that the potency of LpxC inhibitors in vitro can be altered by assay conditions used in screening and/or development of LpxC inhibitors and that the metal ion status of LpxC in vivo will likely influence the effectiveness of LpxC inhibitors as antibiotics.     

UDP-3-O-((R)-3-hydroxymyristoyl)-N-acetylglucosamine deacetylase functions through a general acid-base catalyst pair mechanism

UDP-3-O-((R)-3-hydroxymyristoyl)-N-acetylglucosamine deacetylase (LpxC) is a zinc-dependent enzyme that catalyzes the deacetylation of UDP-3-O-((R)-3-hydroxymyristoyl)-N-acetylglucosamine to form UDP-3-O-(R-hydroxymyristoyl)glucosamine and acetate. The structural similarity of the active site of LpxC to metalloproteases led to the proposal that LpxC functions via a metalloprotease-like mechanism. The pH dependence of k(cat)/Km catalyzed by Escherichia coli and Aquifex aeolicus LpxC displayed a bell-shaped curve (EcLpxC yields apparent pKa values of 6.4+/-0.1 and 9.1+/-0.1), demonstrating that at least two ionizations are important for maximal activity. Metal substitution and mutagenesis experiments suggest that the basic limb of the pH profile is because of deprotonation of a zinc-coordinated group such as the zinc-water molecule, whereas the acidic limb of the pH profile is caused by protonation of either Glu78 or His265. Furthermore, the magnitude of the activity decreases and synergy observed for the active site mutants suggest that Glu78 and His265 act as a general acid-base catalyst pair. Crystal structures of LpxC complexed with cacodylate or palmitate demonstrate that both Glu78 and His265 hydrogen-bond with the same oxygen atom of the tetrahedral intermediate and the product carboxylate. These structural features suggest that LpxC catalyzes deacetylation by using Glu78 and His265 as a general acid-base pair and the zinc-bound water as a nucleophile.     

Syntheses, structures and antibiotic activities of LpxC inhibitors based on the diacetylene scaffold

Compounds inhibiting LpxC in the lipid A biosynthetic pathway are promising leads for novel antibiotics against multidrug-resistant Gram-negative pathogens. We report the syntheses and structural and biochemical characterizations of LpxC inhibitors based on a diphenyl-diacetylene (1,4-diphenyl-1,3-butadiyne) threonyl-hydroxamate scaffold. These studies provide a molecular interpretation for the differential antibiotic activities of compounds with a substituted distal phenyl ring as well as the absolute stereochemical requirement at the C2, but not C3, position of the threonyl group.     

Control of lipopolysaccharide biosynthesis by FtsH-mediated proteolysis of LpxC is conserved in enterobacteria but not in all gram-negative bacteria

Despite the essential function of lipopolysaccharides (LPS) in Gram-negative bacteria, it is largely unknown how the exact amount of this molecule in the outer membrane is controlled. The first committed step in LPS biosynthesis is catalyzed by the LpxC enzyme. In Escherichia coli, the cellular concentration of LpxC is adjusted by the only essential protease in this organism, the membrane-anchored metalloprotease FtsH. Turnover of E. coli LpxC requires a length- and sequence-specific C-terminal degradation signal. LpxC proteins from Salmonella, Yersinia, and Vibrio species carry similar C-terminal ends and, like the E. coli enzyme, were degraded by FtsH. Although LpxC proteins are highly conserved in Gram-negative bacteria, there are striking differences in their C termini. The Aquifex aeolicus enzyme, which is devoid of the C-terminal extension, was stable in E. coli, whereas LpxC from the alphaproteobacteria Agrobacterium tumefaciens and Rhodobacter capsulatus was degraded by the Lon protease. Proteolysis of the A. tumefaciens protein required the C-terminal end of LpxC. High stability of Pseudomonas aeruginosa LpxC in E. coli and P. aeruginosa suggested that Pseudomonas uses a proteolysis-independent strategy to control its LPS content. The differences in LpxC turnover along with previously reported differences in susceptibility against antimicrobial compounds have important implications for the potential of LpxC as a drug target.     

Catalysis within the lipid bilayer-structure and mechanism of the MAPEG family of integral membrane proteins

Integral membrane enzymes of the MAPEG (membrane-associated proteins in eicosanoid and glutathione metabolism) family catalyze glutathione-dependent transformations of lipophilic substrates harvested from the lipid bilayer. Recent studies of members of this family have yielded extensive insights into the structural basis for their substrate binding and catalytic activity. Most informative are the structural studies of leukotriene C4 synthase, revealing a narrow hydrophobic substrate binding pocket allowing extensive recognition of the aliphatic chain of the LTA(4) substrate. A key feature of the pocket is a tryptophan residue that pins down the omega-end of the aliphatic chain into the active site. Since MAPEG members cannot utilize a hydrophobic effect for substrate binding, this novel mode of substrate recognition appears well suited for harvesting lipophilic substrates from the membrane. The binding mode also allows for the specific alignment of the substrate in the active site, positioning the C6 of the substrate for conjugation with glutathione. The glutathione is in turn bound in a polar pocket submerged into the protein core. Structure-based sequence alignments of human MAPEG members support the notion that the glutathione binding site is highly conserved among MAPEG enzymes and that they use a similar mechanism for glutathione activation.