ArgR and PepA, accessory proteins for XerCD-mediated resolution of ColE1 dimers, are also required for stable maintenance of the P1 prophage

Dimers of low copy number plasmids must be resolved to monomers to prevent interference with active partition. For the P1 prophage this is achieved by the Cre site-specific recombinase acting at lox. Multimerisation of multicopy plasmids threatens stability via copy number depression, and multimers of ColE1 are resolved by XerCD-mediated recombination at cer. Xer-cer is constrained to multimer resolution by accessory proteins ArgR and PepA. Recently, it has been shown that ArgR and PepA influence Cre-mediated recombination at a cer-lox hybrid site in vitro, defining the structure of the synaptic complex. We show here that both ArgR and PepA are required for stable maintenance of the P1 prophage. It is extremely difficult to establish P1 in a strain lacking PepA and the prophage was lost rapidly once selection was removed. ArgR plays a less crucial role although its absence significantly increased prophage loss. The effect of the accessory proteins is seen only at physiological concentrations of Cre; when the recombinase is expressed from a multicopy plasmid, the prophage is unstable even in the presence of ArgR and PepA. We propose that ArgR and PepA are involved in Cre-lox recombination in vivo, probably by constraining the system to resolution of prophage dimers.     

Control of Cre recombination by regulatory elements from Xer recombination systems

Site-specific recombination by the Cre recombinase takes place at a simple DNA site (loxP), requires no additional proteins and gives topologically simple recombination products. In contrast, cer and psi sites for Xer recombination contain approximately 150 bp of accessory sequences, require accessory proteins PepA, ArgR and ArcA, and the products are specifically linked to form a four-noded catenane. Here, we use hybrid sites consisting of accessory sequences of cer or psi fused to loxP to probe the function of accessory proteins in site-specific recombination. We show that PepA instructs Cre to produce four-noded catenane, but is not required for recombination at these hybrid sites. Mutants of Cre that require PepA and accessory sequences for efficient recombination were selected. PepA-dependent Cre gave products with a specific topology and displayed resolution selectivity. Our results reveal that PepA acts autonomously in the synapsis of psi and cer accessory sequences and is the main architectural element responsible for intertwining accessory site DNA. We suggest that accessory proteins can activate recombinases simply by synapsing the regulatory DNA sequences, thus bringing the recombination sites together with a specific geometry. This may occur without the need for protein-protein interactions between accessory proteins and the recombinases.     

Direct interaction of aminopeptidase A with recombination site DNA in Xer site-specific recombination.

Xer site-specific recombination at ColE1 cer converts plasmid multimers into monomers, thus ensuring the heritable stability of ColE1. Two related recombinase proteins, XerC and XerD, catalyse the strand exchange reaction at a 30 bp recombination core site. In addition, two accessory proteins, PepA and ArgR, are required for recombination at cer. These two accessory proteins are thought to act at 180 bp of accessory sequences adjacent to the cer recombination core to ensure that recombination only occurs between directly repeated sites on the same molecule. Here, we demonstrate that PepA and ArgR interact directly with cer, forming a complex in which the accessory sequences of two cer sites are interwrapped approximately three times in a right-handed fashion. We present a model for this synaptic complex, and propose that strand exchange can only occur after the formation of this complex.     

The ArcA/ArcB two-component regulatory system of Escherichia coli is essential for Xer site-specific recombination at psi

Two recombinases, XerC and XerD, act at the recombination sites psi and cer in plasmids pSC101 and ColE1 respectively. Recombination at these sites maintains the plasmids in a monomeric state and helps to promote stable plasmid inheritance. The accessory protein PepA acts at both psi and cer to ensure that only intramolecular recombination takes place. An additional accessory protein, ArgR, is required for recombination at cer but not at psi . Here, we demonstrate that the ArcA/ArcB two-component regulatory system of Escherichia coli , which mediates adaptation to anaerobic growth conditions, is required for efficient recombination in vivo at psi . Phosphorylated ArcA binds to psi in vitro and increases the efficiency of recombination at this site. Binding of ArcA to psi may contribute to the formation of a higher order synaptic complex between a pair of psi sites, thus helping to ensure that recombination is intramolecular.     

Differential regulation of multiple overlapping promoters in flagellar class II operons in Escherichia coli

The cer –Xer dimer resolution system of plasmid ColE1 is highly selective, acting only at sites on the same molecule and in direct repeat. Recombination requires the XerCD recombinase and accessory proteins ArgR and PepA. The Escherichia coli chromosome dimer resolution site dif and the type II hybrid site use the same recombinase but are independent of ArgR and PepA and show no site selectivity. This has led to the proposal that ArgR and PepA are responsible for the imposition of constraint. We describe here the characterization of a novel class of 'conditionally constrained' multimer resolution sites whose properties support this hypothesis. In the presence of ArgR and PepA, plasmids containing conditionally constrained sites are monomeric, but in their absence, extensive multimerisation is seen. A mutant ArgR derivative (ArgR110), which is defective in cer -mediated dimer resolution, remains able to prevent plasmid multimerisation by a conditionally constrained site. This implies that the accessory factors block recombination in trans rather than ensuring rapid multimer resolution. When the distance between the ArgR and XerCD binding sites in a conditionally constrained site was altered by a non-integral number of helical turns, the site became unconstrained. Constraint was restored by the insertion of a full helical turn.     

Nucleoprotein architecture and ColE1 dimer resolution: a hypothesis

Dimers of plasmid ColE1 are converted to monomers by site-specific recombination, a process that requires 240 bp of DNA ( cer ) and four host-encoded proteins (XerC, XerD, ArgR and PepA). Here, we propose structures for nucleoprotein complexes involved in cer –Xer recombination based upon existing knowledge of the structures of component proteins and computational analyses of protein structure and DNA curvature. We propose that, in the nucleoprotein complex at a single cer site, a PepA hexamer acts as an adaptor, connecting the heterodimeric recombinase (XerCD) to an ArgR hexamer. This provides a protein core around which the cer site wraps, its exact path being defined by strong sequence-specific interactions with ArgR and XerCD, weak interactions with PepA and sequence-dependent flexibility of cer . The initial association of single-site complexes (pairing) is proposed to occur via an ArgR–PepA interaction. Pairing between sites in a plasmid dimer is stabilized by DNA supercoiling and is followed by a structural isomerization to form a recombination-proficient synaptic complex. We propose that paired structures formed between sites in trans are too short-lived to permit synaptic complex formation. There is thus an energetic barrier to inappropriate recombination reactions. Our proposals are consistent with a wide range of experimental observations.     

Communication between accessory factors and the Cre recombinase at hybrid psi-loxP sites

By placing loxP adjacent to the accessory sequences from the Xer/psi multimer resolution system, we have imposed topological selectivity and specificity on Cre/loxP recombination. In this hybrid recombination system, the Xer accessory protein PepA binds to psi accessory sequences, interwraps them, and brings the loxP sites together such that the product of recombination is a four-node catenane. Here, we investigate communication between PepA and Cre by varying the distance between loxP and the accessory sequences, and by altering the orientation of loxP. The yield of four-node catenane and the efficiency of recombination in the presence of PepA varied with the helical phase of loxP with respect to the accessory sequences. When the orientation of loxP was reversed, or when half a helical turn was added between the accessory sequences and loxP, PepA reversed the preferred order of strand exchange by Cre at loxP. The results imply that PepA and the accessory sequences define precisely the geometry of the synapse formed by the loxP sites, and that this overcomes the innate preference of Cre to initiate recombination on the bottom strand of loxP. Further analysis of our results demonstrates that PepA can stimulate strand exchange by Cre in two distinct synaptic complexes, with the C-terminal domains of Cre facing either towards or away from PepA. Thus, no specific PepA-recombinase interaction is required, and correct juxtaposition of the loxP sites is sufficient to activate Cre in this system.     

Peptidase activity of Escherichia coli aminopeptidase A is not required for its role in Xer site-specific recombination

Xer site-specific recombination is required for the stable inheritance of multicopy plasmids and the normal segregation of the bacterial chromosome in Escherichia coli.Two related recombinases and two accessory proteins are essential for Xer-mediated recombination at cer, a recombination site in the plasmid ColE1 The accessory proteins, ArgR and PepA, function in ensuring that the Xer recombination reaction acts exclusively intramolecularly, converting plasmid dimers into monomers and not vice versa. PepA is an amino-exopeptidase, but its molecular role in the Xer recombination mechanism is unclear. Here we show that a mutation directed at the presumptive active site of PepA creates a protein with no detectable peptidase activity in vitro or in vivo, but which still functions normality in Xer site-specific recombination at cer.     

Xer-mediated site-specific recombination in vitro.

The Xer site-specific recombination system acts at ColE1 cer and pSC101 psi sites to ensure that these plasmids are in a monomeric state prior to cell division. We show that four proteins, ArgR, PepA, XerC and XerD are necessary and sufficient for recombination between directly repeated cer sites on a supercoiled plasmid in vitro. Only PepA, XerC and XerD are required for recombination at psi in vitro. Recombination at cer and psi in vitro requires negative supercoiling and is exclusively intramolecular. Strand exchange at cer produces Holliday junction-containing products in which only the top strands have been exchanged. This reaction requires the catalytic tyrosine residue of Xer C but not that of XerD. Recombination at psi gives catenated circular resolution products. Strand exchange at psi is sequential. XerC catalyses the first (top) strand exchange to make a Holiday junction intermediate and XerD catalyses the second (bottom) strand exchange.     

Characterization of the Stable Maintenance of theShigella flexneriPlasmid pHS-2

pHS-2 is a 3-kb plasmid originally isolated fromShigella flexneriinfections associated with reactive arthritis in humans. This plasmid is stably maintained in many clinical isolates ofShigella flexneri.The nucleotide sequence of this plasmid displays two closely linked regions that may play a role in the maintenance of this plasmid. One region consists of a 250-bp locus showing a significant homology to the ColE1cersite. The results indicate that thecer-like site of pHS-2, like the ColE1cersite, acts as arecA-independent, site-specific recombination site involved in the resolution of multimers, requiring the presence of the host-encoded factors ArgR, PepA, XerC, and XerD. The second region consists of a 36-kDa open reading frame involved in generating resistance to the bactericidal effect of complement, which confers a selective advantage to cells containing this sequence. The results also indicate that pHS-2 can replicate in another species of Enterobacteriaceae (Escherichia coli) and is mobilized by the F plasmid.     

Studies on the properties of P1 site-specific recombination: evidence for topologically unlinked products following recombination

Bacteriophage P1 encodes its own site-specific recombination system consisting of a site at which recombination takes place called loxP and a recombinase called Cre. A number of lambda and plasmid substrates containing two loxP sites have been constructed. Using these substrates we have shown both in vivo and in vitro that a fully functional loxP site is composed of no more than 60 bp. In vitro, when an extract containing Cre is used, recombination between loxP sites on supercoiled, nicked-circle or linear DNA occurs efficiently. The most surprising result from the in vitro studies is that 50% of the products of recombination between loxP sites on a supercoiled DNA substrate are present as free supercoiled circles. The ability to produce free products starting with a supercoiled substrate suggests a rather unique property of Cre-mediated lox recombination, the implications of which are discussed in terms of possible effects of the protein on the topology of the DNA molecule.     

A mutational analysis of the bacteriophage P1 recombinase Cre

Bacteriophage P1 encodes a 38,600 Mr site-specific recombinase, Cre, that is responsible for reciprocal recombination between sites on the P1 DNA called loxP. Using in vitro mutagenesis 67 cre mutants representing a total of 37 unique changes have been characterized. The mutations result in a wide variety of phenotypes as judged by the varying ability of each mutant Cre protein to excise a lacZ gene located between two loxP sites in vivo. Although the mutations are found throughout the entire cre gene, almost half are located near the carboxyl terminus of the protein, suggesting a region critical for recombinase function. DNA binding assays using partially purified mutant proteins indicate that mutations in two widely separated regions of the protein each result in loss of heparin-resistant complexes between Cre and a loxP site. These results suggest that Cre may contain two separate domains, both of which are involved in binding to loxP.     

Xer-mediated site-specific recombination at cer generates Holliday junctions in vivo.

Normal segregation of the Escherichia coli chromosome and stable inheritance of multicopy plasmids such as ColE1 requires the Xer site-specific recombination system. Two putative lambda integrase family recombinases, XerC and XerD, participate in the recombination reactions. We have constructed an E. coli strain in which the expression of xerC can be tightly regulated, thereby allowing the analysis of controlled recombination reactions in vivo. Xer-mediated recombination in this strain generates Holliday junction-containing DNA molecules in which a specific pair of strands has been exchanged in addition to complete recombinant products. This suggests that Xer site-specific recombination utilizes a strand exchange mechanism similar or identical to that of other members of the lambda integrase family of recombination systems. The controlled in vivo recombination reaction at cer requires recombinase and two accessory proteins, ArgR and PepA. Generation of Holliday junctions and recombinant products is equally efficient in RuvC- and RuvC+ cells, and in cells containing a multicopy RuvC+ plasmid. Controlled XerC expression is also used to analyse the efficiency of recombination between variant cer sites containing sequence alterations and heterologies within their central regions.     

Targeted insertion of exogenous DNA into the eukaryotic genome by the Cre recombinase

Cre is a 38-kD protein from bacteriophage P1 that catalyzes site-specific recombination between 34-bp loxP sequences. Our previous work has shown that Cre can perform site-specific excisive recombination not only in prokaryotes, but also in eukaryotes such as yeast and cultured mammalian cells. In this work we show that intermolecular Cre-mediated recombination can specifically direct the integration of a loxP-containing circular DNA into a chromosomal loxP site, both in yeast and in mammalian cells. The resulting integrants are predominantly simple single-copy insertions. Cre-mediated recombination thus provides a simple way to direct single-copy site-specific integration of exogenous DNA into the eukaryotic genome.     

Determinants of product topology in a hybrid Cre-Tn3 resolvase site-specific recombination system

Many natural DNA site-specific recombination systems achieve directionality and/or selectivity by making recombinants with a specific DNA topology. This property requires that the DNA architecture of the synapse and the mechanism of strand exchange are both under strict control. Previously we reported that Tn3 resolvase-mediated synapsis of the accessory binding sites from the Tn3 recombination site res can impose topological selectivity on Cre/loxP recombination. Here, we show that the topology of these reactions is profoundly affected by subtle changes in the hybrid recombination site les. Reversing the orientation of loxP relative to the res accessory sequence, or adding 4 bp to the DNA between loxP and the accessory sequence, can switch between two-noded and four-noded catenane products. By analysing Holliday junction intermediates, we show that the innate bias in the order of strand exchanges at loxP is maintained despite the changes in topology. We conclude that a specific synaptic structure formed by resolvase and the res accessory sequences permits Cre to align the adjoining loxP sites in several distinct ways, and that resolvase-mediated intertwining of the accessory sequences may be less than has been assumed previously.     

Bacteriophage P1 Cre-loxP site-specific recombination. Site-specific DNA topoisomerase activity of the Cre recombination protein

Site-specific recombination in bacteriophage P1 occurs between two loxP sites in the presence of the Cre recombination protein. The structure of the 34-base pair loxP site consists of two 13-base pair inverted repeats separated by an 8-base pair spacer region. A mutation in the loxP site has been constructed which deletes one of the internal bases of the spacer region at the axis of dyad symmetry. This mutant loxP site shows a 10-fold reduction in recombination activity with a wild-type site both in vivo and in vitro. This low level of intramolecular recombination between a wild-type loxP site and the mutant loxP501 site is observed in vitro only when the DNA substrate is supercoiled. The majority of the supercoiled substrate is relaxed by the Cre protein, and on longer incubations, single-stranded nicks accumulate in the DNA. We have determined that these nicks occur in both the wild-type and the mutant sites. The positions of these nicks correspond to the positions of cleavage found during recombination of two wild-type sites, suggesting that the Cre protein is attempting to carry out recombination with the mutant site but most of the time this reaction is abortive. We have determined that the Cre protein relaxes a supercoiled topoisomer of a DNA substrate containing one wild-type site and one mutant site to yield a distribution of topoisomers whose linking numbers differ by steps of one, indicating that Cre can act as a type I topoisomerase.     

Using an in vivo phagemid system to identify non-compatible loxP sequences.

The site-specific recombination system of bacteriophage P1 is composed of the Cre recombinase that recognizes a 34-bp loxP site. The Cre/loxP system has been extensively used to manipulate eukaryotic genomes for functional genomic investigations. The creation of additional heterologous loxP sequences potentially expands the utility of this system, but only if these loxP sequences do not recombine with one another. We have developed a stringent in vivo assay to examine the degree of recombination between all combinations of each previously published heterologous loxP sequence. As expected, homologous loxP sequences efficiently underwent Cre-mediated recombination. However, many of the heterologous loxP pairs were able to support recombination with rates varying from 5 to 100%. Some of these loxP sequences have previously been reported to be non-compatible with one another. Our study also confirmed other heterologous loxP pairs that had previously been shown to be non-compatible, as well as defined additional combinations that could be used in designing new recombination vectors.     

Using an in vivo phagemid system to identify non-compatible loxP sequences

The site-specific recombination system of bacteriophage P1 is composed of the Cre recombinase that recognizes a 34-bp loxP site. The Cre/loxP system has been extensively used to manipulate eukaryotic genomes for functional genomic investigations. The creation of additional heterologous loxP sequences potentially expands the utility of this system, but only if these loxP sequences do not recombine with one another. We have developed a stringent in vivo assay to examine the degree of recombination between all combinations of each previously published heterologous loxP sequence. As expected, homologous loxP sequences efficiently underwent Cre-mediated recombination. However, many of the heterologous loxP pairs were able to support recombination with rates varying from 5 to 100%. Some of these loxP sequences have previously been reported to be non-compatible with one another. Our study also confirmed other heterologous loxP pairs that had previously been shown to be non-compatible, as well as defined additional combinations that could be used in designing new recombination vectors.