Luminal material in microtubules of frog olfactory axons: structure and distribution

The substructure and distribution of luminal material in microtubules of olfactory axons were studied in the bullfrog, Rana catesbeiana. By using numerous fixation methods, with and without osmium tetroxide, the luminal component was shown not to be an artifact of fixation. The material consists of globular elements 4-5 nm in diameter loosely arranged within the lumen in a discontinuous column. Counts of microtubules showing luminal material were obtained for axons in the proximal and distal ends of the olfactory nerve, and it was found that 16-18% more of the microtubules in the distal regions showed the luminal component. This raises the possibility that the material might be translocated within the microtubule lumen and tends to accumulate as it moves distally toward the axon terminal. In contrast to those of the olfactory axons, microtubules assembled in vitro from frog brain tubulin did not show luminal material. When microtubules in olfactory axons were depolymerized in situ by cold and calcium treatment and then induced to reassemble, most of those that were formed de novo showed empty lumina. Such evidence suggests that the luminal material is not an integral component of the microtubule. The hypothesis is discussed that material may be translocated within the lumina of microtubules. Furthermore, in the case of neuronal microtubules, the possibility is raised that they may serve as conduits for their own wall subunits.     

In vivo and in vitro studies on the role of HMW-MAPs in taxol-induced microtubule bundling

The involvement of high molecular weight microtubule-associated proteins (HMW-MAPs) in the process of taxol-induced microtubule bundling has been studied using immunofluorescence and electron microscopy. Immunofluorescence microscopy shows that HMW-MAPs are released from microtubules in granulosa cells which have been extracted in a Triton X-100 microtubule-stabilizing buffer (T-MTSB), unless the cells are pretreated with taxol. 1.0 microM taxol treatment for 48 h results in microtubule bundle formation and the retention of HMW-MAPs in these cells upon extraction with T-MTSB. Electron microscopy demonstrates that microtubules in control cytoskeletons are devoid of surface structures whereas the microtubules in taxol-treated cytoskeletons are decorated by globular particles of a mean diameter of 19.5 nm. The assembly of 3 X cycled whole microtubule protein (tubulin plus associated proteins) in vitro in the presence of 1.0 microM taxol, results in the formation of closely packed microtubules decorated with irregularly spaced globular particles, similar in size to those observed in cytoskeletons of taxol-treated granulosa cells. Microtubules assembled in vitro in the absence of taxol display prominent filamentous extensions from the microtubule surface and center-to-center spacings greater than that observed for microtubules assembled in the presence of taxol. Brain microtubule protein was purified into 6 s and HMW-MAP-enriched fractions, and the effects of taxol on the assembly and morphology of these fractions, separately or in combination, were examined. Microtubules assembled from 6 s tubulin alone or 6 s tubulin plus taxol (without HMW-MAPs) were short, free structures whereas those formed in the presence of taxol from 6 s tubulin and a HMW-MAP-enriched fraction were extensively crosslinked into aggregates. These data suggest that taxol induces microtubule bundling by stabilizing the association of HMW-MAPs with the microtubule surface which promotes lateral aggregation.     

Three-dimensional structure of a membrane-microtubule complex

The unicellular algae Distigma proteus contain a group of aligned microtubules associated with their cell membrane. The association is maintained in isolated membrane fragments. The membrane-microtubule complex also includes a crystalline array of membrane particles. The major peptide component of this array was identified by labeling whole cells with radioiodine. The entire complex of membrane, particles, and microtubules is sufficiently well ordered to permit reconstruction from electron micrographs by Fourier techniques. A three-dimensional model of the membrane array at a nominal resolution of 2.5 nm has been calculated. Some similarities were apparent between lattice spacings in the membrane array and in microtubules. Analysis of these lattice correlations suggests a way in which the array of membrane particles may serve as scaffolding for microtubule attachment.     

Cyclostreptin derivatives specifically target cellular tubulin and further map the paclitaxel site

Cyclostreptin is the first microtubule-stabilizing agent whose mechanism of action was discovered to involve formation of a covalent bond with tubulin. Treatment of cells with cyclostreptin irreversibly stabilizes their microtubules because cyclostreptin forms a covalent bond to β-tubulin at either the T220 or the N228 residue, located at the microtubule pore or luminal taxoid binding site, respectively. Because of its unique mechanism of action, cyclostreptin overcomes P-glycoprotein-mediated multidrug resistance in tumor cells. We used a series of reactive cyclostreptin analogues, 6-chloroacetyl-cyclostreptin, 8-chloroacetyl-cyclostreptin, and [(14)C-acetyl]-8-acetyl-cyclostreptin, to characterize the cellular target of the compound and to map the binding site. The three analogues were cytotoxic and stabilized microtubules in both sensitive and multidrug resistant tumor cells. In both types of cells, we identified β-tubulin as the only or the predominantly labeled cellular protein, indicating that covalent binding to microtubules is sufficient to prevent drug efflux mediated by P-glycoprotein. 6-Chloroacetyl-cyclostreptin, 8-chloroacetyl-cyclostreptin, and 8-acetyl-cyclostreptin labeled both microtubules and unassembled tubulin at a single residue of the same tryptic peptide of β-tubulin as was labeled by cyclostreptin (219-LTTPTYGDLNHLVSATMSGVTTCLR-243), but labeling with the analogues occurred at different positions of the peptide. 8-Acetyl-cyclostreptin reacted with either T220 or N228, as did the natural product, while 8-chloroacetyl-cyclostreptin formed a cross-link to C241. Finally, 6-chloroacetyl-cyclostreptin reacted with any of the three residues, thus labeling the pathway for cyclostreptin-like compounds, leading from the pore where these compounds enter the microtubule to the luminal binding pocket.     

Posttranslational modification and microtubule stability

We have probed the relationship between tubulin posttranslational modification and microtubule stability, using a variation of the antibody-blocking technique. In human retinoblastoma cells we find that acetylated and detyrosinated microtubules represent congruent subsets of the cells' total microtubules. We also find that stable microtubules defined as those that had not undergone polymerization within 1 h after injection of biotin-tubulin were all posttranslationally modified; furthermore dynamic microtubules were all unmodified. We therefore conclude that in these cells the stable, acetylated, and detyrosinated microtubules represent the same subset of the cells' total network. Posttranslational modification, however, is not a prerequisite for microtubule stability and vice versa. Potorous tridactylis kidney cells have no detectable acetylated microtubules but do have a sizable subset of stable ones, and chick embryo fibroblast cells are extensively modified but have few stable microtubules. We conclude that different cell types can create specific microtubule subsets by modulating the relative rates of posttranslational modification and microtubule turnover.     

The combination of peripheral nerve grafts and acidic fibroblast growth factor enhances arginase I and polyamine spermine expression in transected rat spinal cords

Dual-focus imaging optics for three-dimensional tracking of individual quantum dots has been developed to study the molecular mechanisms of motor proteins in cells. The new system has a high spatial and temporal precision, 2 nm in the x-y sample plane and 5 nm along the z-axis at a frame time of 2 ms. Three-dimensional positions of the vesicles labeled with quantum dots were detected in living cells. Vesicles were transported on the microtubules using 8-nm steps towards the nucleus. The steps had fluctuation of approximately 20 nm which were perpendicular to the axis of the microtubule but with the constant distance from the microtubule. The most of perpendicular movement was not synchronized with the 8-nm steps, indicating that dynein moved on microtubules without changing the protofilaments. When the vesicles changed their direction of movement toward the cell membrane, they moved perpendicular with the constant distance from the microtubule. The present method is powerful tool to investigate three dimensional movement of molecules in cells with nanometer and millisecond accuracy.     

S. pombe kinesins-8 promote both nucleation and catastrophe of microtubules

The kinesins-8 were originally thought to be microtubule depolymerases, but are now emerging as more versatile catalysts of microtubule dynamics. We show here that S. pombe Klp5-436 and Klp6-440 are non-processive plus-end-directed motors whose in vitro velocities on S. pombe microtubules at 7 and 23 nm s(-1) are too slow to keep pace with the growing tips of dynamic interphase microtubules in living S. pombe. In vitro, Klp5 and 6 dimers exhibit a hitherto-undescribed combination of strong enhancement of microtubule nucleation with no effect on growth rate or catastrophe frequency. By contrast in vivo, both Klp5 and Klp6 promote microtubule catastrophe at cell ends whilst Klp6 also increases the number of interphase microtubule arrays (IMAs). Our data support a model in which Klp5/6 bind tightly to free tubulin heterodimers, strongly promoting the nucleation of new microtubules, and then continue to land as a tubulin-motor complex on the tips of growing microtubules, with the motors then dissociating after a few seconds residence on the lattice. In vivo, we predict that only at cell ends, when growing microtubule tips become lodged and their growth slows down, will Klp5/6 motor activity succeed in tracking growing microtubule tips. This mechanism would allow Klp5/6 to detect the arrival of microtubule tips at cells ends and to amplify the intrinsic tendency for microtubules to catastrophise in compression at cell ends. Our evidence identifies Klp5 and 6 as spatial regulators of microtubule dynamics that enhance both microtubule nucleation at the cell centre and microtubule catastrophe at the cell ends.     

Vaults bind directly to microtubules via their caps and not their barrels

Vaults are large (13 Mda) ribonucleoprotein particles that are especially abundant in multidrug resistant cancer cells and have been implicated in nucleocytoplasmic drug transport. To understand how these large barrel-shaped complexes are transported through the cytosol, we examined the association of vaults with microtubules both in vitro and in vivo. Within cells, a subpopulation of vaults clearly associates with microtubules, and these vaults remain associated with tubulin dimers/oligomers when microtubules are disassembled by nocodazole treatment. In vitro, a microtubule-pull down assay using highly purified rat vaults and reassembled microtubules reveals that vaults exhibit concentration-dependent binding to microtubules that does not require the carboxyl terminal end of tubulin. Remarkably, negative staining for electron microscopy reveals that vault binding to microtubules is mediated by the vault caps; more than 82% of bound vaults attach to the microtubule lattice with their long axes perpendicular to the long axis of the microtubule. Five to six vault particles were bound per micron of microtubule, with no crosslinking of microtubules observed, suggesting that only one end of the vault can bind microtubules. Taken together, the data support the model of vaults as barrel-shaped containers that transiently interact with microtubules.     

Radial microtubule organization by histone H1 on nuclei of cultured tobacco BY-2 cells

In acentriolar higher plant cells, the surface of the nucleus acts as a microtubule-organizing center, substituting for the centrosome. However, the protein factors responsible for this microtubule organization are unknown. The nuclear surfaces of cultured tobacco BY-2 cells possess particles that generate microtubules. We attempted to isolate the proteins in these particles to determine their role in microtubule organization. When incubated with plant or mammalian tubulin, some, but not all, of the isolated nuclei generated abundant microtubules radially from their surfaces. The substance to induce the formation of radial microtubules was confirmed by SDS-PAGE to be a protein with apparent molecular mass of 38 kDa. Partial analysis of the amino acid sequences of the peptide fragments suggested it was a histone H1-related protein. Cloning and cDNA sequence analysis confirmed this and revealed that when the recombinant protein was incubated with tubulin, it could organize microtubules as well as the 38-kDa protein. Histone H1 and tubulin formed complexes immediately, even on ice, and then clusters of these structures were formed. These clusters generated radial microtubules. This microtubule-organizing property was confined to histone H1; all other core histones failed to act as organizers. On immunoblot analysis, rabbit antibodies raised against the 38-kDa protein cross-reacted with histone H1 proteins from tobacco BY-2 cells. These antibodies virtually abolished the ability of the nucleus to organize radial microtubules. Indirect immunofluorescence showed that the antigen was distributed at the nuclear plasm and particularly at nuclear periphery independently from DNA.     

Evidence for microtubule subunit addition to the distal end of mitotic structures in vitro

HeLa cells blocked in metaphase with 0.04 micrograms/ml of the microtubule poison nocodazole were shown to contain large numbers of microtubules with typical mitotic organization but no cenriole. Lysis of nocodazole-poisoned cells in a microtubule reassembly buffer containing 0.5 M PIPES, 2.5% dimethyl sulfoxide, 1 mM EDTA, 1 mM MgCl2, 1 mM GTP, 1% Triton X-165, 0.5% sodium deoxycholate, 0.2% SDS, pH 6.9, preserved metaphase aster structures 5 micrograms in diameter surrounded only by a thin, fibrous cell remnant. Inclusion of 2 mg/ml porcine brain microtubule protein in the lysis buffer produced asters up to 20 micrometers in diameter with a birefringent retardation of 5-6 nm. In these large asters the central microtubules had normal morphology, but peripheral microtubules were clearly abnormal. Our interpretation is that in high PIPES lysis buffer, exogenous brain tubulin adds to the distal ends of preexisting aster microtubules to form abnormal microtubules. This observation supports the assumptions made by Borisy and by Summers and Kirschner in their interpretation of growth experiments to determine the microtubule polarity in mitotic structures.     

Protofilament number in microtubules in cells of two parasitic nematodes

The parasitic nematodes, Ascaridia galli and Trichostrongylus colubriformis, were prepared for electron microscopy with fixatives containing tannic acid, which allowed their microtubule protofilament number to be examined. In contrast to many mammalian tissues, the nematodes did not contain microtubules with 13 protofilaments. Ascaridia galli contained microtubules with 11 protofilaments in all tissues examined, including nerve, intestinal, pharyngeal, and hypodermal cells. Trichostrongylus colubriformis contained nerve cells, known as microtubule cells, with bundles of larger microtubules (approximately 30 nm in diameter) with 14 protofilaments. The microtubules in these cells did not appear to be continuous for the entire length of the axon. Other cells examined in T. colubriformis, including nerve, intestinal and pharyngeal cells, contained two distinct types of microtubules, one with 11 protofilaments and an approximate diameter of 25 nm, and one with 12 protofilaments and an approximate diameter of 27 nm. All cell types examined contained both types of microtubules.     

Two-state displacement by the kinesin-14 Ncd stalk

The nonprocessive kinesin-14 Ncd motor binds to microtubules and hydrolyzes ATP, undergoing a single displacement before releasing the microtubule. A lever-like rotation of the coiled-coil stalk is thought to drive Ncd displacements or steps along microtubules. Crystal structures and cryoelectron microscopy reconstructions imply that stalk rotation is correlated with ADP release and microtubule binding by the motor. Here we report FRET assays showing that the end of the stalk is more than ~9nm from the microtubule when wild-type Ncd binds microtubules without added nucleotide, but the stalk is within ~6nm of the microtubule surface when the microtubule-bound motor binds an ATP analogue, matching the rotated state observed in crystal structures. We propose that the stalk rotation is initiated when the motor binds to microtubules and releases ADP, and is completed when ATP binds.     

Putative involvement of a 49 kDa protein in microtubule assembly in vitro

In higher plant cells, thus far only a few molecules have been inferred to be involved in microtubule organizing centers (MTOCs). Examination of a 49 kDa tobacco protein, homologous to a 51 kDa protein involved in sea urchin MTOCs, showed that it also accumulated at the putative MTOC sites in tobacco BY-2 cells. In this report, we show that the 49 kDa protein is likely to play a significant role in microtubule organization in vitro. We have established a system prepared from BY-2 cells, capable of organizing microtubules in vitro. The fraction, which was partially purified from homogenized miniprotoplasts (evacuolated protoplasts) by salt extraction and subsequent ion exchange chromatography, contained many particles of diameters about 1 micron after desalting by dialysis. When this fraction was incubated with purified porcine brain tubulin, microtubules were elongated radially from the particles and organized into structures similar to the asters observed in animal cells, and therefore also termed "asters" here. Since we could hardly detect BY-2 tubulin molecules in this fraction, the microtubules in "asters" seemed to be solely composed of the added porcine tubulin. Tubulin molecules were newly polymerized at the ends of the microtubules distal to the particles, and the elongation rate of microtubules was more similar to the reported rate of the plus-ends than that of the minus-ends in vitro. By fluorescence microscopy, the 49 kDa protein was shown to be located at the particles. Thus, its location at the centers of the "asters" suggests that the protein plays a role in microtubule organization in vitro.     

Effects of tubulin acetylation and tubulin acetyltransferase binding on microtubule structure

Tubulin undergoes posttranslational modifications proposed to specify microtubule subpopulations for particular functions. Most of these modifications occur on the C-termini of tubulin and may directly affect the binding of microtubule-associated proteins (MAPs) or motors. Acetylation of Lys-40 on α-tubulin is unique in that it is located on the luminal surface of microtubules, away from the interaction sites of most MAPs and motors. We investigate whether acetylation alters the architecture of microtubules or the conformation of tubulin, using cryo–electron microscopy (cryo-EM). No significant changes are observed based on protofilament distributions or microtubule helical lattice parameters. Furthermore, no clear differences in tubulin structure are detected between cryo-EM reconstructions of maximally deacetylated or acetylated microtubules. Our results indicate that the effect of acetylation must be highly localized and affect interaction with proteins that bind directly to the lumen of the microtubule. We also investigate the interaction of the tubulin acetyltransferase, αTAT1, with microtubules and find that αTAT1 is able to interact with the outside of the microtubule, at least partly through the tubulin C-termini. Binding to the outside surface of the microtubule could facilitate access of αTAT1 to its luminal site of action if microtubules undergo lateral opening between protofilaments.     

Arabidopsis MICROTUBULE-ASSOCIATED PROTEIN18 functions in directional cell growth by destabilizing cortical microtubules

Microtubule-associated proteins (MAPs) play important roles in the regulation of microtubule function in cells. We describe Arabidopsis thaliana MAP18, which binds to microtubules and inhibits tubulin polymerization in vitro and colocalizes along cortical microtubules as patches of dot-like structures. MAP18 is expressed mostly in the expanding cells. Cells overexpressing MAP18 in Arabidopsis exhibit various growth phenotypes with loss of polarity. Cortical microtubule arrays were significantly altered in cells either overexpressing MAP18 or where it had been downregulated by RNA interference (RNAi). The cortical microtubules were more sensitive to treatment with microtubule-disrupting drugs when MAP18 was overexpressed, but more resistant when MAP18 was eliminated in cells expressing MAP18 RNAi. Our study demonstrated that MAP18 may play a role in regulating directional cell growth and cortical microtubule organization by destabilizing microtubules.     

Association of ribosomes with in vitro assembled microtubules

Microtubules were purified from unfertilized eggs of the sea urchins Arbacia punctulata, Lytechinus pictus, Lytechinus variegatus, and Strongylocentrotus purpuratus. Numerous densely stained particles (24 x 26 nm) are associated with microtubules isolated from each of these sea urchins. The most striking aspect of this structure is an extended, slightly curved arm that appears to attach the particles to the microtubule. Morphologically similar particles are associated with microtubules of the isolated first cleavage mitotic apparatus. The particles are attached to the microtubules by ionic interactions and contain large amounts of extractable RNA. Based upon their size and density, RNA and protein composition, and sedimentation in sucrose gradients, the microtubule-associated particles are identified as ribosomes.     

Lateral Motion and Bending of Microtubules Studied with a New Single-Filament Tracking Routine in Living Cells

The cytoskeleton is involved in numerous cellular processes such as migration, division, and contraction and provides the tracks for transport driven by molecular motors. Therefore, it is very important to quantify the mechanical behavior of the cytoskeletal filaments to get a better insight into cell mechanics and organization. It has been demonstrated that relevant mechanical properties of microtubules can be extracted from the analysis of their motion and shape fluctuations. However, tracking individual filaments in living cells is extremely complex due, for example, to the high and heterogeneous background. We introduce a believed new tracking algorithm that allows recovering the coordinates of fluorescent microtubules with ∼9 nm precision in in vitro conditions. To illustrate potential applications of this algorithm, we studied the curvature distributions of fluorescent microtubules in living cells. By performing a Fourier analysis of the microtubule shapes, we found that the curvatures followed a thermal-like distribution as previously reported with an effective persistence length of ∼20 μm, a value significantly smaller than that measured in vitro. We also verified that the microtubule-associated protein XTP or the depolymerization of the actin network do not affect this value; however, the disruption of intermediate filaments decreased the persistence length. Also, we recovered trajectories of microtubule segments in actin or intermediate filament-depleted cells, and observed a significant increase of their motion with respect to untreated cells showing that these filaments contribute to the overall organization of the microtubule network. Moreover, the analysis of trajectories of microtubule segments in untreated cells showed that these filaments presented a slower but more directional motion in the cortex with respect to the perinuclear region, and suggests that the tracking routine would allow mapping the microtubule dynamical organization in cells.     

Cytoskeletal architecture of isolated mitotic spindle with special reference to microtubule-associated proteins and cytoplasmic dynein

We have studied cytoskeletal architectures of isolated mitotic apparatus from sea urchin eggs using quick-freeze, deep-etch electron microscopy. This method revealed the existence of an extensive three- dimensional network of straight and branching crossbridges between spindle microtubules. The surface of the spindle microtubules was almost entirely covered with hexagonally packed, small, round button- like structures which were very uniform in shape and size (approximately 8 nm in diameter), and these microtubule buttons frequently provided bases for crossbridges between adjacent microtubules. These structures were removed from the surface of microtubules by high salt (0.6 M NaCl) extraction. Microtubule- associated proteins (MAPs) and microtubules isolated from mitotic spindles which were mainly composed of a large amount of 75-kD protein and some high molecular mass (250 kD, 245 kD) proteins were polymerized in vitro and examined by quick-freeze, deep-etch electron microscopy. The surfaces of microtubules were entirely covered with the same hexagonally packed round buttons, the arrangement of which is intimately related to that of tubulin dimers. Short crossbridges and some longer crossbridges were also observed. High salt treatment (0.6 M NaCl) extracted both 75-kD protein and high molecular weight proteins and removed microtubule buttons and most of crossbridges from the surface of microtubules. Considering the relatively high amount of 75- kD protein among MAPs isolated from mitotic spindles, it is concluded that these microtubule buttons probably consist of 75-kD MAP and that some of the crossbridges in vivo could belong to MAPs. Another kind of granule, larger in size (11-26 nm in diameter), was also on occasion associated with the surface of microtubules of mitotic spindles. A fine sidearm sometimes connected the larger granule to adjacent microtubules. Localization of cytoplasmic dynein ATPase in the mitotic spindle was investigated by electron microscopic immunocytochemistry with a monoclonal antibody (D57) against sea urchin sperm flagellar 21S dynein and colloidal gold-labeled second antibody. Immunogold particles were closely associated with spindle microtubules. 76% of these were within 50 nm and 55% were within 20 nm from the surface of the microtubules. These gold particles were sporadically found on both polar and kinetochore microtubules of half-spindles at both metaphase and anaphase. They localized also on the microtubules between sister chromatids in late anaphase. These data indicate that cytoplasmic dynein is attached to the microtubules in sea urchin mitotic spindles.(ABSTRACT TRUNCATED AT 400 WORDS)