Plant regeneration from patchouli protoplasts encapsulated in alginate beads

Mesophyll protoplasts were isolated from leaves of in vitro grown patchouli (Pogostemon cablin Benth.). The protoplasts were encapsulated in alginate beads, approximately 2–3×10³ protoplasts per 25 l bead. Successful colony formation was induced when the protoplast beads were inoculated into a liquid medium supplemented with 10^-6 M NAA and 10^-5 M BA. The frequency of colony formation was improved greatly by the inclusion of several beads per ml medium. To induce high colony formation for a single bead, it was essential to culture protoplasts in the presence of nurse beads containing actively-growing cells of the same species. Rapid regeneration of plants from protoplast-derived calluses was accomplished by a two-step culture procedure with liquid and then solid media. Gas-chromatographic analyses showed that regenerated plants produced an essential oil comprising a full-set of patchouli sesquiterpenes.Abbreviations BA 6-benzylaminopurine - 2,4-D 2,4-dichlorophenoxyacetic acid - f. wt. fresh weight - GC gas chromatography - MES 2-(N-morpholino)ethanesulfonic acid - NAA 1-naphthaleneacetic acid     

Elucidation of optimum conditions for immobilization of viable cells by using calcium alginate

Different factors which affect the stability of calcium alginate gel beads entrapping viable cells during fermentation were investigated. It was found that among others, the initial population of cells per ml of gel beads, the length of period of incubation in CaCl₂ solution, and the concentration of sodium alginate used for the immobilization were the most important factors affecting the stability of the gel beads during fermentation. By using an initial cell population of about 10⁵ cells per ml of 2.0% sodium alginate, and incubating the beads for at least 22 h in a CaCl₂ solution after immobilization, the percentage of beads which developed cracks during fermentation was highly reduced. Also, without the addition of CaCl₂ into the fermenting broth, the gel beads were stable for nine consecutive batch fermentations.     

Calcium alginate immobilized hybridomas grown using a fluidized-bed perfusion system with a protein-free medium

Hybridoma SPO1 cells were immobilized in calcium alginate beads and were further grown in a fluidized-bed perfusion system with a protein-free medium. The presence of serum in the steps of entrapment was shown to be helpful for the preservation of cell viability. Each step during immobilization was investigated with respect to the extent of cell damage caused. The immobilization process using small beads caused a lower cell viability initially but allowed a higher rate of cell growth subsequently, compared to those in large beads. In a perfusion system for the continuous production of monoclonal antibodies (MAb), the viable cell density reached 2×10⁷ cells per ml of beads with a viability of 40%. Compared with the cells in suspension culture, the immobilized SPO1 cells showed higher viable cell based specific rates of substrate uptake (glucose and glutamine) and of MAb production. A significant drop in the formation of lactate after the cell growth entered a steady state suggested a higher activity of the Tricarboxylic Acid Cycle in the cells when the cell density became high.     

Callus regeneration from Trifolium subterraneum protoplasts and enhanced protoplast division by low-voltage treatment and nurse cells

Seedling and suspension culture protoplasts of subterranean clover (Trifolium subterraneum L.) were successfully cultured in semi-solid drops of calcium alginate and ultrafiltered liquid medium. Protoplast-derived subterranean-clover colonies developed as the osmolality was lowered over three steps. Callus was established from these colonies. Calli derived from protoplasts have failed to regenerate on a range of media. The frequency of dividing subterranean-clover protoplasts was increased in the presence of lucerne (Medicago sativa L.) nurse cells. Low-voltage treatments (200 mV) for the first 16–132 hours of culture also resulted in a 100% increase in the frequency of dividing protoplasts.     

Hybridoma cells in a protein-free medium within a composite gel perfusion bioreactor

A composite gel system has been developed combining the chemical and physical properties of calcium alginate and agarose gels. The results of growing composite gel immobilized hybridoma SPO1 cells in a protein-free medium within a fluidized-bed perfusion bioreactor are presented in this paper. During the continuous operation of this system, the total cell density reached 3.9×10⁷ cells per ml of beads (viability 79.6%). The specific productivity of monoclonal antibody of the immobilized hybridoma cells reached more than 1.5 g per 10⁶ viable cells per hour, compared with 0.5 for non-immobilized viable cells grown in a one liter agitated bioreactor with the same medium. Significant increases in cell metabolic activities, including substrate utilization and byproduct formation, were also observed. Leaching of materials from the beads was evident and the major fraction of released materials was alginate.     

Culture of soybean mesophyll protoplasts in alginate beads

Mesophyll protoplasts were isolated from leaves of 10 day old aseptically grown soybean seedlings, or from surface disinfested leaves of 3 week old plants grown in environmental chambers. The protoplasts were encapsulated in 2mm diameter Ca alginate beads. Immobilized protoplasts were induced to divide by culturing in shaker flasks containing an actively growing soybean cell suspension. The feeder cell suspension supported the division of protoplasts independent of the protoplast density in the Ca alginate beads. At day 18 after encapsulation, the alginate matrix was dissolved, releasing viable callus colonies. The feeder cell suspension obviated plating of protoplasts at high density which is usually required for subsequent cell division and colony development. Since the protoplasts were embedded at low density, the cell colonies were derived from single cells.     

Use of natural polymers as immobilizing agents and effects on the growth of Dunaliella salina and its glycerol production

Agar-agar, agarose, carrageenan and calcium alginate were used for the immobilization of Dunaliella salina cells. Out of the four, agar-agar was found to be the most effective and therefore the study was carried out on it using different pH values ranging from 6 to 10 and cell densities from 0.1 to 0.8 μg chlorophyll (chl, a) per bead to find which are is best suited for glycerol production. The maximum glycerol production of 9.2 μM/mg chl a was recorded in agar-agar immobilized algae and this was followed by 8.4 μM/mg chl a in calcium alginate. The maximum cell number 6.2 × 10⁹/ml and the specific growth rate (μ) of 0.80 l/day were reached at pH 8 in agar-agar immobilized algae. It was shown that the maximum amount of glycerol was produced when the cell density was 0.8 μg chl a/ block. Changing the medium after 24 hours affected the rate of glycerol production at different pH values. Using a cell density of 0.8 μg chl a/block at 16 W/m² light intensity increased the glycerol production in comparison with the use of free living cells.     

Fractionation of plant protoplast types by iso-osmotic density gradient centrifugation

Summary A simple effective technique for the fractionation of protoplast populations is described. Protoplasts are separated by low-speed centrifugation in an iso-osmotic, discontinuous density gradient system on the basis of differences in their buoyant densities. At a constant osmolality of 660±20 mOs/kg H₂O, the gradients provide a density range from 1.017 to 1.069 g/cm³ at 20 °C which corresponds to the buoyant densities of most protoplast types studied. Characteristics of the KMC/S-density gradient system and factors affecting the fractionation were investigated. Protoplasts were isolated from various tissues and cultivars of tobacco, barley, wheat, rye, oat and maize. Their density-dependent distribution profiles in KMC/S-gradients and their average buoyant densities were determined under standardized conditions. Great differences in the buoyant densities were found between protoplasts of different tissues. Mixed populations of two types of protoplasts, differing in buoyant density by about 15–20 mg/cm³, were separated to give highly purified fractions. Factors affecting the buoyant densities of protoplasts have been investigated. Ploidy level and species differences did not significantly affect the fractionation profiles. However, an age-dependent variation in the average buoyant density of tobacco mesophyll protoplasts was observed. Fractionation of tobacco mesophyll protoplasts and their subsequent regeneration to plants demonstrates the practicability and physiological compatibility of the KMC/S-density gradient system under sterile conditions. The morphogenetic potential of protoplasts was not affected by the separation procedure or the gradient components.     

Performance of an external loop air-lift bioreactor for the production of monoclonal antibodies by immobilized hybridoma cells

Summary The performance of an external loop air-lift bioreactor was investigated by assessing the inter-relationships between various hydrodynamic properties and mass transfer. The feasibility of using this bioreactor for the production of monoclonal antibodies by mouse hybridoma cells immobilized in calcium alginate gel beads and alginate/poly-l-lysine microcapsules was also examined. When the superficial gas velocity, V _g , in the 300 ml reactor was varied from 2 to 36 cm/min, the average liquid velocity increased from 3 to 14 cm/sec, the gas hold-up rose from 0.2 to 3.0%, and the oxygen mass transfer coefficient, k _L a, increased from 2.5 to 18.1 h^-1. A minimum liquid velocity of 4 cm/s was required to maintain alginate gel beads (1000 m diameter, occupying 3% of reactor volume) in suspension. Batch culture of hybridoma cells immobilized in alginate beads followed logarithmic growth, reaching a concentration of 4×10⁷ cells/ml beads after 11 days. Significant antibody production did not occur until day 9 into the culture, reaching a value of 100 g/ml of medium at day 11. On the other hand, bioreactor studies with encapsulated hybridoma cells gave monoclonal antibody concentrations of up to 800 g/ml capsules (the antibody being retained within the semipermeable capsule) and maximum cell densities of 2×10⁸ cells/ml capsule at day 11. The volumetric productivities of the alginate gel immobilized cell system and the encapsulated cell system were 9 and 3 g antibody per ml of reactor volume per day, respectively. The main advantage of the bioreactor system is its simple design, since no mechanical input is required to vary the hydrodynamic properties.     

An improved approach for transformation of plant cells by microinjection: molecular and genetic analysis

A new culture method for the injection of tobacco mesophyll protoplasts has been established. The protoplasts are embedded in a thin layer of alginate and are nourished from the medium in the underlying basislayer. In the alginate layer the protoplasts regenerate to calli at a frequency of up to 80%. Embedded protoplasts can be selected either with 50 mg l⁻¹ kanamycin or 5 mg l⁻¹ paromomycin. Single resistant cells can be recovered from about 10 000 sensitive cells in one alginate layer. Injection of theneo gene (coding for neomycin phosphotransferase II) into protoplast derived single cells in the alginate layer results in kanamycin resistant colonies that can be regenerated to mature plants. These plants express the neomycin phosphotransferase as shown by enzyme activity assay. The integration of the transgene into the plant genome could be proved by Southern hybridization to high molecular weight DNA. With this culture method 100 cells can be injected per hour. Transformation frequencies range from 2 to 20%. In crossing experiments, it was shown that the foreign gene is transmitted to the next generation in a Mendelian fashion.     

In vitro culture of tobacco protoplasts: Use of feeder techniques to support division of cells plated at low densities

Summary Tobacco protoplasts obtained from leaf mesophyll cells and suspended in agar nutrient medium divided and produced colonies only when plated at high densities, above 10⁴ cells per ml. At such densities coalescence of the expanding colonies occurred at high frequency. Nondividing X-irradiated protoplasts used as feeder cells supported division of viable protoplasts plated at densities as low as 10² cells per ml. The feeder cell technique should thus facilitate the application of screening procedures for the isolation of colonies originating from single mutated cells occurring in a suspended population.     

Production of thermostable and neutral glucoamylase using immobilized <Emphasis Type="Italic">Thermomucor indicae-seudaticae</Emphasis>

Thermomucor indicae-seudaticae was immobilized in alginate, κ-carrageenan, agarose, agar, polyacrylamide and loofah (Luffa cylindrica) sponge (as such or coated with alginate/starch/Emerson YpSs agar), and used for the production of glucoamylase in submerged fermentation. The mycelium developed from alginate-immobilized sporangiospores secreted higher glucoamylase titres (22.7 U ml⁻¹) than those immobilized in other gel matrices and the freely growing mycelial pellets (18.5 U ml⁻¹). Loofah network provided a good support for mycelial growth, but the enzyme production was lower than that attained with alginate beads. Glucoamylase production increased with inoculum density and the optimum levels were achieved when 40 calcium alginate beads (∼5 × 10⁶ immobilized spores) were used to inoculate 50 ml production medium. The alginate bead inoculum displayed high storage stability at 4°C and produced comparable enzyme titres up to 120 days. The glucoamylase production by hyphae emerged from the immobilized sporangiospores was almost stable over eight batches of repeated fermentation. Scanning electron micrographs of alginate beads, after batch fermentation, revealed extensive mycelial growth inside and around the beads.     

The isolation and culture of protoplasts from an embryogenic cell suspension culture of Picea glauca (moench) voss

Conditions were standardized for the isolation and culture of protoplasts from an embryogenic cell suspension culture of Picea glauca. A combination of 0.5% Cellulase R-10, 0.25% Macerozyme, 0.25% Driselase, 0.25% Rhozyme HP-150 with 0.5M mannitol and 5 mM CaCl₂.2H₂O produced an average of 4.5 × 10⁶ protoplasts per gram fresh weight of cells. Of the several protoplast culture media tested, von Arnold and Eriksson and Kao and Michayluk (KM8P) media best supported mitotic divisions of protoplasts. A density of 10⁵ protoplasts per ml and the addition of 5 mM glutamine to the culture medium was necessary to induce sustained divisions and microcallus formation. Microcalli grew into subculturable callus using a nurse culture technique.Abbreviations BAP benzylaminopurine - 2,4-D 2,4-dichlorophenoxy-acetic acid - FDA fluorescein diacetate NRCC No. 27937     

Improvement of protoplast culture protocols for Beta vulgaris L. (sugar beet)

Summary The effects of NaCl, feeder cells and the embedding of protoplasts in calcium alginate have been investigated in an attempt to improve culture conditions of recalcitrant sugar beet (Beta vulgaris L.) mesophyll protoplasts. While the use of NaCl in all instances proved detrimental to protoplast development, the other two treatments had clear beneficial effects. Minimum plating densities, necessary to sustain cell division, could be reduced to <5% (<4000 protoplasts / ml) of the control levels and plating efficiencies could be significantly enhanced by approx. 10 fold. Plants could still be regenerated from soft calli derived from mesophyll protoplasts cultured under the modified conditions at a frequency of 20–30 %. In particular, the use of alginate is considered of potentially great importance for the further application of beet protoplasts for other aims e.g. asymmetric hybridization.     

Production of xylanase by immobilized Trichoderma reesei SAF3 in Ca-alginate beads

In the present study, the optimum conditions for the production of xylanase by immobilized spores of Trichoderma reesei SAF3 in calcium alginate beads were determined. The operational stability of the beads during xylanase production under semi-continuous fermentation was also studied. The influence of alginate concentration (1, 2, 3, and 4%) and initial cell loading (100, 200, 300, 400, and 500 beads per flask) on xylanase production was considered. The production of xylanase was found to increase significantly with increasing concentration of alginate and reached a maximum yield of 3.12 ± 0.18 U ml⁻¹ at 2% (w/v). The immobilized cells produced xylanase consistently up to 10 cycles and reached a maximum level at the forth cycle (3.36 ± 0.2 U ml⁻¹).     

Nutritional requirements of protoplast-derived,haploid tobacco cells grown at low cell densities in liquid medium

Preliminary attempts to define a completely synthetic medium able to support divisions of haploid tobacco mesophyll protoplasts at low initial densities have failed. High protoplast concentrations together with large amounts of naphtaleneacetic acid in the medium (3 mg l^-1 NAA) were required for maximal induction of protoplast division. However, cell suspensions derived from haploid protoplasts after four days of preculture at high initial cell densities could be diluted to densities as low as 1–4 cells ml^-1, provided the concentration of NAA in the medium was lowered to below 0.3 mg l^-1. The optimal NAA supply for low cell density growth was affected by the nature of the nitrogen source.A simple minimal medium which supports the growth of these haploid cells with a plating efficiency of 30–40%, independent of the cell density in the range of 1–4 to 3·10⁴ cells ml^-1, has been established. In this medium inositol was the only vitamin stringently required for growth.Growth of cells at low densities was also possible in a medium initially containing 3 mg l^-1 NAA, provided it was conditioned by the growth of protoplasts at high densities. Preliminary experiments with [¹⁴C]NAA showed that the amount of free NAA remaining in the medium after preincubation at high densities was drastically reduced. Simultaneously, NAA conjugates accumulated in the medium. The implications of these results are discussed.Abbreviations BA 6-benzyladenine - EDTA ethylene diaminetetraacetic acid - NAA naphtaleneacetic acid     

Production of gallic acid by immobilization of Rhizopus oryzae

Production of gallic acid using the immobilized cells of Rhizopus oryzae has been studied. It was observed that 2% tannic acid concentration, 200 numbers of calcium alginate beads of spore concentration 2?×?10⁵/ml and initial pH 5.0 gave the maximum gallic acid production. The % of tannin conversion was 78.5% whereas in free cell culture, the % conversion was 83.5% in 4 days of incubation period. The beads were used for 3 times successfully. A drastic fall in the hydrolysis process was observed when the beads were treated with glutaraldehyde.     

l-Glutamate production by protoplasts immobilized in carrageenan gel

Protoplastization of Brevibacterium flavum cultured in a medium containing 50 μg l⁻¹ and 5 units penicillin per ml was performed by lysozyme treatment. The protoplasts were immobilized in various polymer matrices, such as agar, polyacrylamide, calcium alginate, and κ-carrageenan and then used for l-glutamate production from glucose and urea in a batch system. The protoplasts immobilized in κ-carrageenan gels showed the highest productivity of l-glutamate being twice that of immobilized whole cells under optimum conditions. The maximum productivity reached 2.3 mg ml⁻¹ initially. The immobilized B. flavum protoplasts could be used 8 times (192 h) for l-glutamate production retaining about 22% of the initial productivity during the last reaction.     

Microcallus growth from maize protoplasts

Maize (Zea mays L.) protoplasts obtained from Type I and Type II calli from several genotypes were shown to be capable of synthesizing cell walls and forming small clusters of cells. The medium used also supported cluster formation from protoplasts obtained from root tips. The effects of various additions to the medium (such as casein hydrolysate, coconut water, amino acids, sugars, phytohormones, nitrate, calcium, and dimethylsulfoxide as well as pH variations on cellcluster formation were determined. The method of culture (protoplasts plated in agarose or supported in alginate beads in liquid medium) as well as several components of the medium were found to be critical for microcallus formation. Protoplasts obtained from embryogenic Type I callus and cultured in the medium of C. Nitsch and J.P. Nitsch (1967, Planta 72, 355–370) modified by various additions (NN 67-mod medium) were affected most by various sugars, casein hydrolysate, coconut water, and a combination of the auxins napthalene-1-acetic acid (2 mg/l) and 2,4-dichlorophenoxyacetic acid (0.1 mg/l), and the cytokinin N⁶-benzylaminopurine (0.5 mg/l). Cluster size in the agarose culture system was from 0.1 to 0.5 mm diameter and in the alginate culture system, up to 2.0 mm diameter.     

Lactococcus lactis release from calcium alginate beads.

Cell release during milk fermentation by Lactococcus lactis immobilized in calcium alginate beads was examined. Numbers of free cells in the milk gradually increased from 1 x 10(6) to 3 x 10(7) CFU/ml upon successive reutilization of the beads. Rinsing the beads between fermentations did not influence the numbers of free cells in the milk. Cell release was not affected by initial cell density within the beads or by alginate concentration, although higher acidification rates were achieved with increased cell loading. Coating alginate beads with poly-L-lysine (PLL) did not significantly reduce the release of cells during five consecutive fermentations. A double coating of PLL and alginate reduced cell release by a factor of approximately 50. However, acidification of milk with beads having the PLL-alginate coating was slower than that with uncoated beads. Immersing the beads in ethanol to kill cells on the periphery reduced cell release, but acidification activity was maintained. Dipping the beads in aluminum nitrate or a hot CaCl2 solution was not as effective as dipping them in ethanol. Ethanol treatment or heating of the beads appears to be a promising method for maintaining acidification activity while minimizing viable cell release due to loosely entrapped cells near the surface of the alginate beads.