A draft genome of sweet cherry (Prunus avium L.) reveals genome‐wide and local effects of domestication

Sweet cherry (Prunus avium L.) trees are both economically important fruit crops but also important components of natural forest ecosystems in Europe, Asia and Africa. Wild and domesticated trees currently coexist in the same geographic areas with important questions arising on their historical relationships. Little is known about the effects of the domestication process on the evolution of the sweet cherry genome. We assembled and annotated the genome of the cultivated variety “Big Star*” and assessed the genetic diversity among 97 sweet cherry accessions representing three different stages in the domestication and breeding process (wild trees, landraces and modern varieties). The genetic diversity analysis revealed significant genome‐wide losses of variation among the three stages and supports a clear distinction between wild and domesticated trees, with only limited gene flow being detected between wild trees and domesticated landraces. We identified 11 domestication sweeps and five breeding sweeps covering, respectively, 11.0 and 2.4 Mb of the P. avium genome. A considerable fraction of the domestication sweeps overlaps with those detected in the related species, Prunus persica (peach), indicating that artificial selection during domestication may have acted independently on the same regions and genes in the two species. We detected 104 candidate genes in sweep regions involved in different processes, such as the determination of fruit texture, the regulation of flowering and fruit ripening and the resistance to pathogens. The signatures of selection identified will enable future evolutionary studies and provide a valuable resource for genetic improvement and conservation programs in sweet cherry.     

Genetic parameters in a rubber tree population: heritabilities,genotype-by-environment interactions and multi-trait correlations

Rubber tree breeding programs are mainly driven by selection of individuals with high yield and quality of rubber. Data from 51 open-pollinated progenies tested on six sites in Brazil were analyzed over several traits to estimate the following: genetic parameters such as narrow-sense heritability and additive genetic variance in single- and multi-site analyses, type B correlations to determine the relevance of genotype-by-environment interactions and its effects on alternative selection strategies, additive genetic repeatability correlation for rubber yield based on three consecutive yearly measurements, and type A correlations to evaluate trait-to-trait genetic associations for all measured traits. Average rubber yield (RYm) showed an estimated narrow-sense heritability of 0.31, with an estimated type B correlation of 0.84, indicating low levels of genotype-by-environment interaction. The trait survival and number of latex vessel rings (RG) showed larger genotype-by-environment interaction and the lowest heritabilites. High to moderate type B correlation was found for most traits, with a value of 0.85 between diameter (or girth) and RYm; therefore, it is possible to achieve interesting rubber yield genetic gains (over 3 years of measurements) from indirect selection based on diameter at age 2.     

Largely unlinked gene sets targeted by selection for domestication syndrome phenotypes in maize and sorghum

The domestication of diverse grain crops from wild grasses was a result of artificial selection for a suite of overlapping traits producing changes referred to in aggregate as ‘domestication syndrome’. Parallel phenotypic change can be accomplished by either selection on orthologous genes or selection on non‐orthologous genes with parallel phenotypic effects. To determine how often artificial selection for domestication traits in the grasses targeted orthologous genes, we employed resequencing data from wild and domesticated accessions of Zea (maize) and Sorghum (sorghum). Many ‘classic’ domestication genes identified through quantitative trait locus mapping in populations resulting from wild/domesticated crosses indeed show signatures of parallel selection in both maize and sorghum. However, the overall number of genes showing signatures of parallel selection in both species is not significantly different from that expected by chance. This suggests that while a small number of genes will extremely large phenotypic effects have been targeted repeatedly by artificial selection during domestication, the optimization part of domestication targeted small and largely non‐overlapping subsets of all possible genes which could produce equivalent phenotypic alterations.     

Expression of the sucrose transporter 3 (<Emphasis Type="Italic">HbSUT3</Emphasis>) in rubber tree and its relation to latex yield

Sucrose is not only a precursor of rubber biosynthesis, but it also participates in other latex regeneration between repeated tapping. Sucrose transporter (HbSUT) genes play key roles in sinks and sources of the rubber biosynthesis pathway. HbSUT3 was dominant in expression in latex among the SUT member genes. Therefore, the expression level of HbSUT3 in latex is a potential indicator distinguishing between high- and low-yielding clones. The aim of this research was to assess the potential of this gene in selective breeding to improve latex yield, from the correlation of HbSUT3 expression with latex yield. Four high-yielding clones were sampled in this study and compared with the common RRIM 600 clone as the baseline, paired by the field. Among the putative full-length cDNAs of Hevea sucrose transporters available in the NCBI database, only HbSUT3 was detected. The HbSUT3 gene was overexpressed in the four rubber clones relative to the control, and the NK1 clone had the highest expression level. The expression level of HbSUT3 correlated positively with latex yield but negatively with the sucrose content of latex. Gene expression analysis of rubber seedlings indicated that the bark had higher expression of this gene than the leaves, and the levels correlated with latex yields of these clones. These data provided new candidate selection criteria for use in the early selection of high-yielding rubber clones, necessary for rapid cycle breeding programs.     

Candidate genes underlying heritable differences in reproductive seasonality between wild and domestic rabbits

Reproductive seasonality is a trait that often differs between domestic animals and their wild ancestors, with domestic animals showing prolonged or even continuous breeding seasons. However, the genetic basis underlying this trait is still poorly understood for most species, and because environmental factors and resource availability are known to play an important role in determining breeding seasons, it is also not clear in most cases to what extent this phenotypic shift is determined by the more lenient captive conditions or by genetic factors. Here, using animals resulting from an initial cross between wild and domestic rabbits followed by two consecutive backcrosses (BC1 and BC2) to wild rabbits, we evaluated the yearly distribution of births for the different generations. Similar to domestic rabbits, F1 animals could be bred all year round but BC1 and BC2 animals showed a progressive and significant reduction in the span of the breeding season, providing experimental evidence that reduced seasonal breeding in domestic rabbits has a clear genetic component and is not a simple by‐product of rearing conditions. We then took advantage of a recently published genome‐wide scan of selection in the domesticated lineage and searched for candidate genes potentially associated with this phenotypic shift. Candidate genes located within regions targeted by selection include well‐known examples of genes controlling clock functions (CRY1 and NR3C1) and reproduction (PRLR).     

Development and mapping of functional expressed sequence tag-derived simple sequence repeat markers in a rubber tree RRIM600 × PB217 population

Sets of polymorphic expressed sequence tag–simple sequence repeat (EST-SSR) markers from the rubber tree (Hevea brasiliensis) have been published by many researchers, but none has been specifically developed to study latex and wood yield traits. In this study, a total 10,321 rubber tree EST sequences, generated from suppression subtractive hybridization-cDNA libraries of bark and latex of high- and low-yielding clones, were used as sources for SSR searching. A total of 432 EST-SSR loci were identified and it was possible to design primer pairs for a subset of 298 EST-SSRs. The highest proportion of EST-SSRs was represented by dinucleotide repeats (46.6 %), followed by trinucleotide repeats (44.3 %). Based on BLASTX analysis, 234 ESTs (80 %) showed similarity to genes in NCBI databases and could be divided into 120 putative proteins with known function and 114 unknown proteins. To enhance the resolution of an existing linkage map from previous work on a rubber tree RRIM600 × PB217 population, 69 EST-SSR markers from the above set were tested to be integrated into the reference genetic map. The enriched map of 18 linkage groups spanned 2054.2 cM in length, showed an average genetic distance of 4.3 cM between adjacent markers, and included 63 new EST-SSR markers. The enhanced map from this study provides a basis for comparative mapping using PCR-based markers and identification of expressed genes possibly affecting important traits of interest.     

Role of lutoid membrane transport and protein synthesis in the regeneration mechanism of latex in different <Emphasis Type="Italic">Hevea</Emphasis> clones

Natural rubber (cis-1,4 polyisoprene) is synthesised in the milky cytoplasm, the latex, of specialized cells called laticifers in the bark tissues of the rubber tree (Hevea brasiliensis). Regeneration mechanism of latex after each tapping (controlled wounding of the bark) was studied in relation to lutoid membrane enzymes and protein synthesis in twelve rubber clones with varying yield potentials during the peak rubber yielding season. High activity of membrane enzymes and better availability of biochemical energy [ATP] were observed in clones viz; RRII 105, RRIM 600, PB 260, RRII 422 and RRII 430. The highest protein biosynthetic capacity was noticed in clone PB 260 and RRIM 600. However, high ATP content, increased invertase activity and protein biosynthesis were observed in the medium yielding clone GT1 compared to clones with low rubber yield potential. Very low sugar content and increased invertase activity in the latex of clone PB 260 indicated intense latex metabolism with high protein turnover that implies fast recouping of the cellular metabolites lost during latex harvesting. Clone PB 217 was characterized by very high sucrose and low ATP concentration and ATPase activity in latex indicating slow metabolism and hence be suitable for inducing latex metabolism using ethylene stimulant. Low rubber yielding clones such as RRII 33 and RRII 38 were consistently recorded a high sucrose content but very low activity of membrane enzymes, reduced ATP concentration and low protein biosynthesis in latex. Among the recently released modern clones (RRII 400 series), latex regeneration capacity was higher in RRII 422 and RRII 430. The significance of lutoid membrane transport and protein synthesis is discussed in relation to general latex metabolism of these rubber clones. The outcome of this study would be helpful to design suitable latex harvesting systems and yield stimulation methods for optimizing latex production in each clone based on metabolic profiling.     

Micro‐organisms in latex and natural rubber coagula of Hevea brasiliensis and their impact on rubber composition,structure and properties

Natural rubber, produced by coagulation of the latex from the tree Hevea brasiliensis, is an important biopolymer used in many applications for its outstanding properties. Besides polyisoprene, latex is rich in many nonisoprene components such as carbohydrates, proteins and lipids and thereby constitutes a favourable medium for the development of micro‐organisms. The fresh rubber coagula obtained by latex coagulation are not immediately processed, allowing the development of various microbial communities. The time period between tree tapping and coagula processing is called maturation, during which an evolution of the properties of the corresponding dry natural rubber occurs. This evolution is partly related to the activity of micro‐organisms and to the modification of the biochemical composition. This review synthesizes the current knowledge on microbial populations in latex and natural rubber coagula of H. brasiliensis and the changes they induce on the biochemistry and technical properties of natural rubber during maturation.     

Ethylene stimulation of latex production in Hevea brasiliensis

Rubber tree (Hevea brasiliensis) is an important industrial crop for natural rubber production. Ethylene, as a stimulant of latex production in H. brasiliensis, has been widely used in commercial latex production. However, the mechanism of ethylene action are not completely elucidated, especially in molecular aspect. Here, we focus on the molecular biological progression of ethylene stimulation of latex production. Our data and all previous information showed ethylene had little direct effect on accelerating rubber biosynthesis. The prolonged latex flow and acceleration of sucrose metabolism by ethylene may be the main reasons for the stimulation of latex yield by ethylene.Key words: Hevea brasiliensis, ethylene, rubber production, gene, sucrose     

The leaf, inner bark and latex cyanide potential of Hevea brasiliensis: Evidence for involvement of cyanogenic glucosides in rubber yield

The latex of Hevea brasiliensis, expelled upon bark tapping, is the cytoplasm of anastomosed latex cells in the inner bark of the rubber tree. Latex regeneration between two tappings is one of the major limiting factors of rubber yield. Hevea species contain high amounts of cyanogenic glucosides from which cyanide is released when the plant is damaged providing an efficient defense mechanism against herbivores. In H. brasiliensis, the cyanogenic glucosides mainly consist of the monoglucoside linamarin (synthesized in the leaves), and its diglucoside transport-form, linustatin. Variations in leaf cyanide potential (CNp) were studied using various parameters. Results showed that the younger the leaf, the higher the CNp. Leaf CNp greatly decreased when leaves were directly exposed to sunlight. These results allowed us to determine the best leaf sampling conditions for the comparison of leaf CNp. Under these conditions, leaf CNp was found to vary from less than 25 mM to more than 60 mM. The rubber clones containing the highest leaf CNp were those with the highest yield potential. In mature virgin trees, the CNp of the trunk inner bark was shown to be proportional to leaf CNp and to decrease on tapping. However, the latex itself exhibited very low (if any) CNp, while harboring all the enzymes (β-d-diglucosidase, linamarase and β-cyanoalanine synthase) necessary to metabolize cyanogenic glucosides to generate non-cyanogenic compounds, such as asparagine. This suggests that in the rubber tree bark, cyanogenic glucosides may be a source of buffering nitrogen and glucose, thereby contributing to latex regeneration/production.     

Development of single nucleotide polymorphism markers in the large and complex rubber tree genome using next-generation sequence data

The development of single nucleotide polymorphism (SNP) markers provides the opportunity to improve many areas of plant breeding and population genetics. Unfortunately, for species such as the rubber tree (Hevea brasiliensis), the use of next-generation sequencing for genomic SNP discovery is very difficult because of the large genome size and the abundance of repeated sequences. Access to a set of validated SNP markers is a significant advantage for rubber researchers who wish to apply SNPs in scientific research. Here, we performed genomic sequencing of H. brasiliensis and generated 10,993,648 short reads, which were assembled into 10,071 contigs (N50 = 3078) by a de novo assembly strategy. A total of 2446 contigs presented no hits in the current H. brasiliensis genome assembly and may therefore be considered novel genomic sequences of rubber tree. A total of 143 putative polymorphic positions were selected, gene annotations were available for 58.7 % of the markers, and all of the sequences could be anchored to the released H. brasiliensis genome. These SNPs were validated in eight genotypes of H. brasiliensis and 15 F1 plants from a mapping population, resulting in 30 (20.9 %) positions correctly classified. The analysis revealed key candidate genes responsible for defence mechanisms and provided markers for further genetic improvement of Hevea in breeding programmes.     

Climate and natural production of rubber (Hevea brasiliensis) in Xishuangbanna,southern part of Yunnan province,China

According to the author's and his collaborators' investigations, the climate influences the growth of rubber trees (Hevea brasiliensis) in Xishuangbanna, the southern part of Yunnan Province, China, in at least four aspects: (1) The yield of latex per tapping and the final yield of dry rubber per tree per year or per unit area per year; (2) the growth rate, as expressed by increment of girth in cm; (3) the survival during the over-wintering period; (4) the initiation or suppression of certain diseases; In this paper the author would like to describe the influence of climatic elements on yield of latex and on survival during the over-wintering period. As for the other two aspects, only general comments are given.     

Time-ordering japonica/geng genomes analysis indicates the importance of large structural variants in rice breeding

Temperate japonica/geng (GJ) rice yield has significantly improved due to intensive breeding efforts, dramatically enhancing global food security. However, little is known about the underlying genomic structural variations (SVs) responsible for this improvement. We compared 58 long-read assemblies comprising cultivated and wild rice species in the present study, revealing 156 319 SVs. The phylogenomic analysis based on the SV dataset detected the putatively selected region of GJ sub-populations. A significant portion of the detected SVs overlapped with genic regions were found to influence the expression of involved genes inside GJ assemblies. Integrating the SVs and causal genetic variants underlying agronomic traits into the analysis enables the precise identification of breeding signatures resulting from complex breeding histories aimed at stress tolerance, yield potential and quality improvement. Further, the results demonstrated genomic and genetic evidence that the SV in the promoter of LTG1 is accounting for chilling sensitivity, and the increased copy numbers of GNP1 were associated with positive effects on grain number. In summary, the current study provides genomic resources for retracing the properties of SVs-shaped agronomic traits during previous breeding procedures, which will assist future genetic, genomic and breeding research on rice.     

Genome‐wide scans to detect positive selection in Large White and Tongcheng pigs

Due to the direction, intensity, duration and consistency of genetic selection, especially recent artificial selection, the production performance of domestic pigs has been greatly changed. Therefore, we reasoned that there must be footprints or selection signatures that had been left during domestication. In this study, with porcine 60K BeadChip genotyping data from both commercial Large White and local Chinese Tongcheng pigs, we calculated the extended haplotype homozygosity values of the two breeds using the long‐range haplotype method to detect selection signatures. We found 34 candidate regions, including 61 known genes, from Large White pigs and 25 regions comprising 57 known genes from Tongcheng pigs. Many selection signatures were found on SSC1, SSC4, SSC7 and SSC14 regions in both populations. According to quantitative trait loci and network pathway analyses, most of the regions and genes were linked to growth, reproduction and immune responses. In addition, the average genetic differentiation coefficient F_ST was 0.254, which means that there had already been a significant differentiation between the breeds. The findings from this study can contribute to further research on molecular mechanisms of pig evolution and domestication and also provide valuable references for improvement of their breeding and cultivation.     

Genetic and epigenetic uniformity of polyembryony derived multiple seedlings of <Emphasis Type="Italic">Hevea brasiliensis</Emphasis>

Hevea brasiliensis Muell. Arg (Para rubber tree) is a tropical tree species of Amazonian origin widely cultivated in several parts of the world for natural rubber, a highly priced commodity inevitable for the world rubber industry. Large, tree to tree variation in growth and latex yield among individual plants of high yielding Hevea clones is a common phenomenon observed in mature rubber plantations. The genetic heterogeneity of the seedlings which are used as rootstocks for propagation through budgrafting is considered as a major factor  responsible for this variation. In order to minimize this variation, attempts were made to develop highly uniform rootstock material via an in vitro technique by inducing zygotic polyembryony in Hevea. Immature open pollinated fruits of a high yielding clone RRII 105 were cultured by half ovulo embryo culture technique. Multiple embryos were induced from the 8–10-week-old zygote with a novel combination of gibberellic acid (GA₃), kinetin, and zeatin. Plantlets were successfully generated from the multiple embryos and raised in the field post hardening. Screening using genetic and epigenetic molecular markers revealed that the multiple seedlings developed are highly uniform and are of single zygotic origin. Development of plants having genetic and epigenetic uniformity suggests that this technique is ideal for raising uniform rootstock material in Hevea which may significantly reduce intraclonal variations. Moreover, these plants could serve as ideal material for physiological and molecular investigations towards the understanding of  stock–scion interaction process in rubber.