Zero-inflated generalized Poisson regression mixture model for mapping quantitative trait loci underlying count trait with many zeros

Phenotypes measured in counts are commonly observed in nature. Statistical methods for mapping quantitative trait loci (QTL) underlying count traits are documented in the literature. The majority of them assume that the count phenotype follows a Poisson distribution with appropriate techniques being applied to handle data dispersion. When a count trait has a genetic basis, “naturally occurring” zero status also reflects the underlying gene effects. Simply ignoring or miss-handling the zero data may lead to wrong QTL inference. In this article, we propose an interval mapping approach for mapping QTL underlying count phenotypes containing many zeros. The effects of QTLs on the zero-inflated count trait are modelled through the zero-inflated generalized Poisson regression mixture model, which can handle the zero inflation and Poisson dispersion in the same distribution. We implement the approach using the EM algorithm with the Newton-Raphson algorithm embedded in the M-step, and provide a genome-wide scan for testing and estimating the QTL effects. The performance of the proposed method is evaluated through extensive simulation studies. Extensions to composite and multiple interval mapping are discussed. The utility of the developed approach is illustrated through a mouse F₂ intercross data set. Significant QTLs are detected to control mouse cholesterol gallstone formation.     

A simulation-based marginal method for longitudinal data with dropout and mismeasured covariates

Longitudinal data often contain missing observations and error-prone covariates. Extensive attention has been directed to analysis methods to adjust for the bias induced by missing observations. There is relatively little work on investigating the effects of covariate measurement error on estimation of the response parameters, especially on simultaneously accounting for the biases induced by both missing values and mismeasured covariates. It is not clear what the impact of ignoring measurement error is when analyzing longitudinal data with both missing observations and error-prone covariates. In this article, we study the effects of covariate measurement error on estimation of the response parameters for longitudinal studies. We develop an inference method that adjusts for the biases induced by measurement error as well as by missingness. The proposed method does not require the full specification of the distribution of the response vector but only requires modeling its mean and variance structures. Furthermore, the proposed method employs the so-called functional modeling strategy to handle the covariate process, with the distribution of covariates left unspecified. These features, plus the simplicity of implementation, make the proposed method very attractive. In this paper, we establish the asymptotic properties for the resulting estimators. With the proposed method, we conduct sensitivity analyses on a cohort data set arising from the Framingham Heart Study. Simulation studies are carried out to evaluate the impact of ignoring covariate measurement error and to assess the performance of the proposed method.     

A smoothed corrected score approach for proportional hazards model with misclassified discretized covariates induced by error-contaminated continuous time-dependent exposure

We consider the proportional hazards model in which the covariates include the discretized categories of a continuous time-dependent exposure variable measured with error. Naively ignoring the measurement error in the analysis may cause biased estimation and erroneous inference. Although various approaches have been proposed to deal with measurement error when the hazard depends linearly on the time-dependent variable, it has not yet been investigated how to correct when the hazard depends on the discretized categories of the time-dependent variable. To fill this gap in the literature, we propose a smoothed corrected score approach based on approximation of the discretized categories after smoothing the indicator function. The consistency and asymptotic normality of the proposed estimator are established. The observation times of the time-dependent variable are allowed to be informative. For comparison, we also extend to this setting two approximate approaches, the regression calibration and the risk-set regression calibration. The methods are assessed by simulation studies and by application to data from an HIV clinical trial.     

The relationship between virologic and immunologic responses in AIDS clinical research using mixed-effects varying-coefficient models with measurement error

In this article we study the relationship between virologic and immunologic responses in AIDS clinical trials. Since plasma HIV RNA copies (viral load) and CD4+ cell counts are crucial virologic and immunologic markers for HIV infection, it is important to study their relationship during HIV/AIDS treatment. We propose a mixed-effects varying-coefficient model based on an exploratory analysis of data from a clinical trial. Since both viral load and CD4+ cell counts are subject to measurement error, we also consider the measurement error problem in covariates in our model. The regression spline method is proposed for inference for parameters in the proposed model. The regression spline method transforms the unknown nonparametric components into parametric functions. It is relatively simple to implement using readily available software, and parameter inference can be developed from standard parametric models. We apply the proposed models and methods to an AIDS clinical study. From this study, we find an interesting relationship between viral load and CD4+ cell counts during antiviral treatments. Biological interpretations and clinical implications are discussed.     

Correction for Covariate Measurement Error in Nonparametric Longitudinal Regression

Summary We introduce a correction for covariate measurement error in nonparametric regression applied to longitudinal binary data arising from a study on human sleep. The data have been surveyed to investigate the association of some hormonal levels and the probability of being asleep. The hormonal effect is modeled flexibly while we account for the error‐prone measurement of its concentration in the blood and the longitudinal character of the data. We present a fully Bayesian treatment utilizing Markov chain Monte Carlo inference techniques, and also introduce block updating to improve sampling and computational performance in the binary case. Our model is partly inspired by the relevance vector machine with radial basis functions, where usually very few basis functions are automatically selected for fitting the data. In the proposed approach, we implement such data‐driven complexity regulation by adopting the idea of Bayesian model averaging. Besides the general theory and the detailed sampling scheme, we also provide a simulation study for the Gaussian and the binary cases by comparing our method to the naive analysis ignoring measurement error. The results demonstrate a clear gain when using the proposed correction method, particularly for the Gaussian case with medium and large measurement error variances, even if the covariate model is misspecified.     

On the generalized poisson regression mixture model for mapping quantitative trait loci with count data

Statistical methods for mapping quantitative trait loci (QTL) have been extensively studied. While most existing methods assume normal distribution of the phenotype, the normality assumption could be easily violated when phenotypes are measured in counts. One natural choice to deal with count traits is to apply the classical Poisson regression model. However, conditional on covariates, the Poisson assumption of mean-variance equality may not be valid when data are potentially under- or overdispersed. In this article, we propose an interval-mapping approach for phenotypes measured in counts. We model the effects of QTL through a generalized Poisson regression model and develop efficient likelihood-based inference procedures. This approach, implemented with the EM algorithm, allows for a genomewide scan for the existence of QTL throughout the entire genome. The performance of the proposed method is evaluated through extensive simulation studies along with comparisons with existing approaches such as the Poisson regression and the generalized estimating equation approach. An application to a rice tiller number data set is given. Our approach provides a standard procedure for mapping QTL involved in the genetic control of complex traits measured in counts.     

Semiparametric frailty models for zero‐inflated event count data in the presence of informative dropout

Recurrent events data are commonly encountered in medical studies. In many applications, only the number of events during the follow‐up period rather than the recurrent event times is available. Two important challenges arise in such studies: (a) a substantial portion of subjects may not experience the event, and (b) we may not observe the event count for the entire study period due to informative dropout. To address the first challenge, we assume that underlying population consists of two subpopulations: a subpopulation nonsusceptible to the event of interest and a subpopulation susceptible to the event of interest. In the susceptible subpopulation, the event count is assumed to follow a Poisson distribution given the follow‐up time and the subject‐specific characteristics. We then introduce a frailty to account for informative dropout. The proposed semiparametric frailty models consist of three submodels: (a) a logistic regression model for the probability such that a subject belongs to the nonsusceptible subpopulation; (b) a nonhomogeneous Poisson process model with an unspecified baseline rate function; and (c) a Cox model for the informative dropout time. We develop likelihood‐based estimation and inference procedures. The maximum likelihood estimators are shown to be consistent. Additionally, the proposed estimators of the finite‐dimensional parameters are asymptotically normal and the covariance matrix attains the semiparametric efficiency bound. Simulation studies demonstrate that the proposed methodologies perform well in practical situations. We apply the proposed methods to a clinical trial on patients with myelodysplastic syndromes.     

On Method of Moments Estimation in Linear Mixed Effects Models with Measurement Error on Covariates and Response with Application to a Longitudinal Study of Gene-Environment Interaction

We study a linear mixed effects model for longitudinal data, where the response variable and covariates with fixed effects are subject to measurement error. We propose a method of moment estimation that does not require any assumption on the functional forms of the distributions of random effects and other random errors in the model. For a classical measurement error model we apply the instrumental variable approach to ensure identifiability of the parameters. Our methodology, without instrumental variables, can be applied to Berkson measurement errors. Using simulation studies, we investigate the finite sample performances of the estimators and show the impact of measurement error on the covariates and the response on the estimation procedure. The results show that our method performs quite satisfactory, especially for the fixed effects with measurement error (even under misspecification of measurement error model). This method is applied to a real data example of a large birth and child cohort study.     

Bias analysis and the simulation‐extrapolation method for survival data with covariate measurement error under parametric proportional odds models

It has been well known that ignoring measurement error may result in substantially biased estimates in many contexts including linear and nonlinear regressions. For survival data with measurement error in covariates, there has been extensive discussion in the literature with the focus on proportional hazards (PH) models. Recently, research interest has extended to accelerated failure time (AFT) and additive hazards (AH) models. However, the impact of measurement error on other models, such as the proportional odds model, has received relatively little attention, although these models are important alternatives when PH, AFT, or AH models are not appropriate to fit data. In this paper, we investigate this important problem and study the bias induced by the naive approach of ignoring covariate measurement error. To adjust for the induced bias, we describe the simulation‐extrapolation method. The proposed method enjoys a number of appealing features. Its implementation is straightforward and can be accomplished with minor modifications of existing software. More importantly, the proposed method does not require modeling the covariate process, which is quite attractive in practice. As the precise values of error‐prone covariates are often not observable, any modeling assumption on such covariates has the risk of model misspecification, hence yielding invalid inferences if this happens. The proposed method is carefully assessed both theoretically and empirically. Theoretically, we establish the asymptotic normality for resulting estimators. Numerically, simulation studies are carried out to evaluate the performance of the estimators as well as the impact of ignoring measurement error, along with an application to a data set arising from the Busselton Health Study. Sensitivity of the proposed method to misspecification of the error model is studied as well.     

A measurement error model for time-series studies of air pollution and mortality

One barrier to interpreting the observational evidence concerning the adverse health effects of air pollution for public policy purposes is the measurement error inherent in estimates of exposure based on ambient pollutant monitors. Exposure assessment studies have shown that data from monitors at central sites may not adequately represent personal exposure. Thus, the exposure error resulting from using centrally measured data as a surrogate for personal exposure can potentially lead to a bias in estimates of the health effects of air pollution. This paper develops a multi-stage Poisson regression model for evaluating the effects of exposure measurement error on estimates of effects of particulate air pollution on mortality in time-series studies. To implement the model, we have used five validation data sets on personal exposure to PM10. Our goal is to combine data on the associations between ambient concentrations of particulate matter and mortality for a specific location, with the validation data on the association between ambient and personal concentrations of particulate matter at the locations where data have been collected. We use these data in a model to estimate the relative risk of mortality associated with estimated personal-exposure concentrations and make a comparison with the risk of mortality estimated with measurements of ambient concentration alone. We apply this method to data comprising daily mortality counts, ambient concentrations of PM10measured at a central site, and temperature for Baltimore, Maryland from 1987 to 1994. We have selected our home city of Baltimore to illustrate the method; the measurement error correction model is general and can be applied to other appropriate locations.Our approach uses a combination of: (1) a generalized additive model with log link and Poisson error for the mortality-personal-exposure association; (2) a multi-stage linear model to estimate the variability across the five validation data sets in the personal-ambient-exposure association; (3) data augmentation methods to address the uncertainty resulting from the missing personal exposure time series in Baltimore. In the Poisson regression model, we account for smooth seasonal and annual trends in mortality using smoothing splines. Taking into account the heterogeneity across locations in the personal-ambient-exposure relationship, we quantify the degree to which the exposure measurement error biases the results toward the null hypothesis of no effect, and estimate the loss of precision in the estimated health effects due to indirectly estimating personal exposures from ambient measurements.     

Semiparametric analysis of zero-inflated count data

Medical and public health research often involve the analysis of count data that exhibit a substantially large proportion of zeros, such as the number of heart attacks and the number of days of missed primary activities in a given period. A zero-inflated Poisson regression model, which hypothesizes a two-point heterogeneity in the population characterized by a binary random effect, is generally used to model such data. Subjects are broadly categorized into the low-risk group leading to structural zero counts and high-risk (or normal) group so that the counts can be modeled by a Poisson regression model. The main aim is to identify the explanatory variables that have significant effects on (i) the probability that the subject is from the low-risk group by means of a logistic regression formulation; and (ii) the magnitude of the counts, given that the subject is from the high-risk group by means of a Poisson regression where the effects of the covariates are assumed to be linearly related to the natural logarithm of the mean of the counts. In this article we consider a semiparametric zero-inflated Poisson regression model that postulates a possibly nonlinear relationship between the natural logarithm of the mean of the counts and a particular covariate. A sieve maximum likelihood estimation method is proposed. Asymptotic properties of the proposed sieve maximum likelihood estimators are discussed. Under some mild conditions, the estimators are shown to be asymptotically efficient and normally distributed. Simulation studies were carried out to investigate the performance of the proposed method. For illustration purpose, the method is applied to a data set from a public health survey conducted in Indonesia where the variable of interest is the number of days of missed primary activities due to illness in a 4-week period.     

Robust best linear estimation for regression analysis using surrogate and instrumental variables

We investigate methods for regression analysis when covariates are measured with errors. In a subset of the whole cohort, a surrogate variable is available for the true unobserved exposure variable. The surrogate variable satisfies the classical measurement error model, but it may not have repeated measurements. In addition to the surrogate variables that are available among the subjects in the calibration sample, we assume that there is an instrumental variable (IV) that is available for all study subjects. An IV is correlated with the unobserved true exposure variable and hence can be useful in the estimation of the regression coefficients. We propose a robust best linear estimator that uses all the available data, which is the most efficient among a class of consistent estimators. The proposed estimator is shown to be consistent and asymptotically normal under very weak distributional assumptions. For Poisson or linear regression, the proposed estimator is consistent even if the measurement error from the surrogate or IV is heteroscedastic. Finite-sample performance of the proposed estimator is examined and compared with other estimators via intensive simulation studies. The proposed method and other methods are applied to a bladder cancer case-control study.     

Expected estimating equations for missing data, measurement error, and misclassification, with application to longitudinal nonignorable missing data

Summary .   Missing data, measurement error, and misclassification are three important problems in many research fields, such as epidemiological studies. It is well known that missing data and measurement error in covariates may lead to biased estimation. Misclassification may be considered as a special type of measurement error, for categorical data. Nevertheless, we treat misclassification as a different problem from measurement error because statistical models for them are different. Indeed, in the literature, methods for these three problems were generally proposed separately given that statistical modeling for them are very different. The problem is more challenging in a longitudinal study with nonignorable missing data. In this article, we consider estimation in generalized linear models under these three incomplete data models. We propose a general approach based on expected estimating equations (EEEs) to solve these three incomplete data problems in a unified fashion. This EEE approach can be easily implemented and its asymptotic covariance can be obtained by sandwich estimation. Intensive simulation studies are performed under various incomplete data settings. The proposed method is applied to a longitudinal study of oral bone density in relation to body bone density.     

Inverse‐probability‐of‐treatment weighted estimation of causal parameters in the presence of error‐contaminated and time‐dependent confounders

Inverse‐probability‐of‐treatment weighted (IPTW) estimation has been widely used to consistently estimate the causal parameters in marginal structural models, with time‐dependent confounding effects adjusted for. Just like other causal inference methods, the validity of IPTW estimation typically requires the crucial condition that all variables are precisely measured. However, this condition, is often violated in practice due to various reasons. It has been well documented that ignoring measurement error often leads to biased inference results. In this paper, we consider the IPTW estimation of the causal parameters in marginal structural models in the presence of error‐contaminated and time‐dependent confounders. We explore several methods to correct for the effects of measurement error on the estimation of causal parameters. Numerical studies are reported to assess the finite sample performance of the proposed methods.     

Zero‐inflated Poisson factor model with application to microbiome read counts

Dimension reduction of high‐dimensional microbiome data facilitates subsequent analysis such as regression and clustering. Most existing reduction methods cannot fully accommodate the special features of the data such as count‐valued and excessive zero reads. We propose a zero‐inflated Poisson factor analysis model in this paper. The model assumes that microbiome read counts follow zero‐inflated Poisson distributions with library size as offset and Poisson rates negatively related to the inflated zero occurrences. The latent parameters of the model form a low‐rank matrix consisting of interpretable loadings and low‐dimensional scores that can be used for further analyses. We develop an efficient and robust expectation‐maximization algorithm for parameter estimation. We demonstrate the efficacy of the proposed method using comprehensive simulation studies. The application to the Oral Infections, Glucose Intolerance, and Insulin Resistance Study provides valuable insights into the relation between subgingival microbiome and periodontal disease.     

Structural inference in transition measurement error models for longitudinal data

We propose a new class of models, transition measurement error models, to study the effects of covariates and the past responses on the current response in longitudinal studies when one of the covariates is measured with error. We show that the response variable conditional on the error-prone covariate follows a complex transition mixed effects model. The naive model obtained by ignoring the measurement error correctly specifies the transition part of the model, but misspecifies the covariate effect structure and ignores the random effects. We next study the asymptotic bias in naive estimator obtained by ignoring the measurement error for both continuous and discrete outcomes. We show that the naive estimator of the regression coefficient of the error-prone covariate is attenuated, while the naive estimators of the regression coefficients of the past responses are generally inflated. We then develop a structural modeling approach for parameter estimation using the maximum likelihood estimation method. In view of the multidimensional integration required by full maximum likelihood estimation, an EM algorithm is developed to calculate maximum likelihood estimators, in which Monte Carlo simulations are used to evaluate the conditional expectations in the E-step. We evaluate the performance of the proposed method through a simulation study and apply it to a longitudinal social support study for elderly women with heart disease. An additional simulation study shows that the Bayesian information criterion (BIC) performs well in choosing the correct transition orders of the models.     

Regression Calibration in Semiparametric Accelerated Failure Time Models

Summary In large cohort studies, it often happens that some covariates are expensive to measure and hence only measured on a validation set. On the other hand, relatively cheap but error‐prone measurements of the covariates are available for all subjects. Regression calibration (RC) estimation method ( Prentice, 1982 , Biometrika 69 , 331–342) is a popular method for analyzing such data and has been applied to the Cox model by Wang et al. (1997, Biometrics 53 , 131–145) under normal measurement error and rare disease assumptions. In this article, we consider the RC estimation method for the semiparametric accelerated failure time model with covariates subject to measurement error. Asymptotic properties of the proposed method are investigated under a two‐phase sampling scheme for validation data that are selected via stratified random sampling, resulting in neither independent nor identically distributed observations. We show that the estimates converge to some well‐defined parameters. In particular, unbiased estimation is feasible under additive normal measurement error models for normal covariates and under Berkson error models. The proposed method performs well in finite‐sample simulation studies. We also apply the proposed method to a depression mortality study.     

A model with space-varying regression coefficients for clustering multivariate spatial count data

Multivariate spatial count data are often segmented by unobserved space-varying factors that vary across space. In this setting, regression models that assume space-constant covariate effects could be too restrictive. Motivated by the analysis of cause-specific mortality data, we propose to estimate space-varying effects by exploiting a multivariate hidden Markov field. It models the data by a battery of Poisson regressions with spatially correlated regression coefficients, which are driven by an unobserved spatial multinomial process. It parsimoniously describes multivariate count data by means of a finite number of latent classes. Parameter estimation is carried out by composite likelihood methods, that we specifically develop for the proposed model. In a case study of cause-specific mortality data in Italy, the model was capable to capture the spatial variation of gender differences and age effects.     

Bayesian latent variable models for mixed discrete outcomes

In studies of complex health conditions, mixtures of discrete outcomes (event time, count, binary, ordered categorical) are commonly collected. For example, studies of skin tumorigenesis record latency time prior to the first tumor, increases in the number of tumors at each week, and the occurrence of internal tumors at the time of death. Motivated by this application, we propose a general underlying Poisson variable framework for mixed discrete outcomes, accommodating dependency through an additive gamma frailty model for the Poisson means. The model has log-linear, complementary log-log, and proportional hazards forms for count, binary and discrete event time outcomes, respectively. Simple closed form expressions can be derived for the marginal expectations, variances, and correlations. Following a Bayesian approach to inference, conditionally-conjugate prior distributions are chosen that facilitate posterior computation via an MCMC algorithm. The methods are illustrated using data from a Tg.AC mouse bioassay study.