Host genetic requirements for DNA release of lactococcal phage TP901-1

The first step in phage infection is the recognition of, and adsorption to, a receptor located on the host cell surface. This reversible host adsorption step is commonly followed by an irreversible event, which involves phage DNA delivery or release into the bacterial cytoplasm. The molecular components that trigger this latter event are unknown for most phages of Gram-positive bacteria. In the current study, we present a comparative genome analysis of three mutants of Lactococcus cremoris 3107, which are resistant to the P335 group phage TP901-1 due to mutations that affect TP901-1 DNA release. Through genetic complementation and phage infection assays, a predicted lactococcal three-component glycosylation system (TGS) was shown to be required for TP901-1 infection. Major cell wall saccharidic components were analysed, but no differences were found. However, heterologous gene expression experiments indicate that this TGS is involved in the glucosylation of a cell envelope-associated component that triggers TP901-1 DNA release. To date, a saccharide modification has not been implicated in the DNA delivery process of a Gram-positive infecting phage.     

Temperate phages TP901-1 and phiLC3, belonging to the P335 species, apparently use different pathways for DNA injection in Lactococcus lactis subsp. cremoris 3107

Five mutants of Lactococcus lactis subsp. cremoris 3107 resistant to phage TP901-1 were obtained after treatment with ethyl methanesulfonate. Two of the mutants were also resistant to phage phiLC3. The remaining three mutants were as sensitive as 3107. Mutants E46 and E100 did not adsorb the two phages. Mutants E119, E121 and E126 adsorbed phage phiLC3 as well as 3107 but phage TP901-1 with significantly reduced efficiency. All, except E46, could be lysogenized with phage TP901-BC1034, a derivative of TP901-1 harboring an erythromycin-resistance marker. However, the lysogenization frequency was 10(3)-10(4) fold higher for 3107 than for the mutants. Mitomycin C induction of lysogenized mutants 3107 indicated that phage propagation was not affected in these four mutants. Electron microscopy and analysis of total DNA of infected cells showed that DNA was liberated from the phage particle during infection of strain 3107 with TP901-1 and that intracellular phage DNA replication occurred. This was not the case for mutants E121 and E126. This strongly suggests that some step starting with triggering DNA release and ending with DNA injection is impaired during infection with TP901-1. As such impairment was not seen when infecting E119, E121 and E126 with phiLC3, we conclude that TP901-1 and phiLC3 either are differently triggered by their receptor or utilize different pathways of injection.     

Structure,Adsorption to Host,and Infection Mechanism of Virulent Lactococcal Phage p2

Lactococcal siphophages from the 936 and P335 groups infect the Gram-positive bacterium Lactococcus lactis using receptor binding proteins (RBPs) attached to their baseplate, a large multiprotein complex at the distal part of the tail. We have previously reported the crystal and electron microscopy (EM) structures of the baseplates of phages p2 (936 group) and TP901-1 (P335 group) as well as the full EM structure of the TP901-1 virion. Here, we report the complete EM structure of siphophage p2, including its capsid, connector complex, tail, and baseplate. Furthermore, we show that the p2 tail is characterized by the presence of protruding decorations, which are related to adhesins and are likely contributed by the major tail protein C-terminal domains. This feature is reminiscent of the tail of Escherichia coli phage λ and Bacillus subtilis phage SPP1 and might point to a common mechanism for establishing initial interactions with their bacterial hosts. Comparative analyses showed that the architecture of the phage p2 baseplate differs largely from that of lactococcal phage TP901-1. We quantified the interaction of its RBP with the saccharidic receptor and determined that specificity is due to lower k_off values of the RBP/saccharidic dissociation. Taken together, these results suggest that the infection of L. lactis strains by phage p2 is a multistep process that involves reversible attachment, followed by baseplate activation, specific attachment of the RBPs to the saccharidic receptor, and DNA ejection.     

Analysis of the Collar-Whisker Structure of Temperate Lactococcal Bacteriophage TP901-1

Proteins homologous to the protein NPS (neck passage structure) are widespread among lactococcal phages. We investigated the hypothesis that NPS is involved in the infection of phage TP901-1 by analysis of an NPS⁻ mutant. NPS was determined to form a collar-whisker complex but was shown to be nonessential for infection, phage assembly, and stability.     

Transduction of a Plasmid Carrying the Cohesive End Region from Lactococcus lactis Bacteriophage ΦLC3

Plasmids carrying the cohesive end region from temperate lactococcal bacteriophage ΦLC3 could be packaged in vivo by ΦLC3 and transduced into its host strain, Lactococcus lactis subsp. cremoris NCDO 1201. The transduction frequencies were between 10^-4 and 10^-3 transducing particles per PFU, depending on the size of the phage DNA insert. This transduction system is limited to only certain lactococcal strains. The ΦLC3 cohesive site region (cos) appears to play an important role in plasmid transduction.     

Identification of a Replication Protein and Repeats Essential for DNA Replication of the Temperate Lactococcal Bacteriophage TP901-1

DNA replication of the temperate lactococcal bacteriophage TP901-1 was shown to involve the gene product encoded by orf13 and the repeats located within the gene. Sequence analysis of 1,500 bp of the early transcribed region of the phage genome revealed a single-stranded DNA binding protein analogue (ORF12) and the putative replication protein (ORF13). The putative origin of replication was identified as series of repeats within orf13 and was shown to confer a TP901-1 resistance phenotype when present in trans. Site-specific mutations were introduced into the replication protein and into the repeats. The mutations were introduced into the TP901-1 prophage by homologous recombination by using a vector with a temperature-sensitive replicon. Subsequent analysis of induced phages showed that the protein encoded by orf13 and the repeats within orf13 were essential for phage TP901-1 amplification. In addition, analyses of internal phage DNA replication showed that the ORF13 protein and the repeats are essential for phage TP901-1 DNA replication in vivo. These results show that orf13 encodes a replication protein and that the repeats within the gene are the origin of replication.     

TPW22, a lactococcal temperate phage with a site-specific integrase closely related to Streptococcus thermophilus phage integrases

The temperate phage TPW22, induced from Lactococcus lactis subsp. cremoris W22, and the evolutionarily interesting integrase of this phage were characterized. Phage TPW22 was propagated lytically on L. lactis subsp. cremoris 3107, which could also be lysogenized by site-specific integration. The attachment site (attP), 5'-TAAGGCGACGGTCG-3', of phage TPW22 was present on a 7.5-kb EcoRI fragment, a 3.4-kb EcoRI-HindIII fragment of which was sequenced. Sequence information revealed the presence of an integrase gene (int). The deduced amino acid sequence showed 42 and 28% identity with integrases of streptococcal and lactococcal phages, respectively. The identities with these integrase-encoding genes were 52 and 45%, respectively, at the nucleotide level. This could indicate horizontal gene transfer. A stable integration vector containing attP and int was constructed, and integration in L. lactis subsp. cremoris MG1363 was obtained. The existence of an exchangeable lactococcal phage integration module was suggested. The proposed module covers the phage attachment site, the integrase gene, and surrounding factor-independent terminator structures. The phages phiLC3, TP901-1, and TPW22 all have different versions of this module. Phylogenetically, the TPW22 Int links the phiLC3 lactococcal integrase with known Streptococcus thermophilus integrases.     

Cloning of Genomic DNA of Lactococcus lactis That Restores Phage Sensitivity to an Unusual Bacteriophage sk1-Resistant Mutant

An unusual, spontaneous, phage sk1-resistant mutant (RMSK1/1) of Lactococcus lactis C2 apparently blocks phage DNA entry into the host. Although no visible plaques formed on RMSK1/1, this host propagated phage at a reduced efficiency. This was evident from center-of-infection experiments, which showed that 21% of infected RMSK1/1 formed plaques when plated on its phage-sensitive parental strain, C2. Moreover, viable cell counts 0 and 4 h after infection were not significantly different from those of an uninfected culture. Further characterization showed that phage adsorption was normal, but burst size was reduced fivefold and the latent period was increased from 28.5 to 36 min. RMSK1/1 was resistant to other, but not all, similar phages. Phage sensitivity was restored to RMSK1/1 by transformation with a cloned DNA fragment from a genomic library of a phage-sensitive strain. Characterization of the DNA that restored phage sensitivity revealed an open reading frame with similarity to sequences encoding lysozymes (β-1,4-N-acetylmuramidase) and lysins from various bacteria, a fungus, and phages of Lactobacillus and Streptococcus and also revealed DNA homologous to noncoding sequences of temperate phage of L. lactis, DNA similar to a region of phage sk1, a gene with similarity to tRNA genes, a prophage attachment site, and open reading frames with similarities to sun and to sequences encoding phosphoprotein phosphatases and protein kinases. Mutational analyses of the cloned DNA showed that the region of homology with lactococcal temperate phage was responsible for restoring the phage-sensitive phenotype. The region of homology with DNA of lactococcal temperate phage was similar to DNA from a previously characterized lactococcal phage that suppresses an abortive infection mechanism of phage resistance. The region of homology with lactococcal temperate phage was deleted from a phage-sensitive strain, but the strain was not phage resistant. The results suggest that the cloned DNA with homology to lactococcal temperate phage was not mutated in the phage-resistant strain. The cloned DNA apparently suppressed the mechanism of resistance, and it may do so by mimicking a region of phage DNA that interacts with components of the resistance mechanism.     

Crystal structure of the receptor-binding protein head domain from Lactococcus lactis phage bIL170

Lactococcus lactis, a gram-positive bacterium widely used by the dairy industry, is subject to lytic phage infections. In the first step of infection, phages recognize the host saccharidic receptor using their receptor binding protein (RBP). Here, we report the 2.30-A-resolution crystal structure of the RBP head domain from phage bIL170. The structure of the head monomer is remarkably close to those of other lactococcal phages, p2 and TP901-1, despite any sequence identity with them. The knowledge of the three-dimensional structures of three RBPs gives a better insight into the module exchanges which have occurred among phages.     

Identification and Characterization of Lactococcal-Prophage-Carried Superinfection Exclusion Genes

Superinfection exclusion (Sie) proteins are prophage-encoded phage resistance systems. In this study, genes encoding Sie systems were identified on the genomes of Lactococcus lactis subsp. cremoris MG1363 and L. lactis subsp. lactis IL1403. These Sie systems are genetically distinct and yet were shown to act specifically against a particular subset of the 936 phage group. Each of the systems allows normal phage adsorption while affecting plasmid transduction and intracellular phage DNA replication, which points to the blocking of phage DNA injection as their common mode of action. Sie-specifying genes found on the MG1363 prophages are also present in various lactococcal strains, whereas the prophage-encoded Sie systems of IL1403 do not appear to be as widely disseminated.     

Identification of a replication protein and repeats essential for DNA replication of the temperate lactococcal bacteriophage TP901-1

DNA replication of the temperate lactococcal bacteriophage TP901-1 was shown to involve the gene product encoded by orf13 and the repeats located within the gene. Sequence analysis of 1,500 bp of the early transcribed region of the phage genome revealed a single-stranded DNA binding protein analogue (ORF12) and the putative replication protein (ORF13). The putative origin of replication was identified as series of repeats within orf13 and was shown to confer a TP901-1 resistance phenotype when present in trans. Site-specific mutations were introduced into the replication protein and into the repeats. The mutations were introduced into the TP901-1 prophage by homologous recombination by using a vector with a temperature-sensitive replicon. Subsequent analysis of induced phages showed that the protein encoded by orf13 and the repeats within orf13 were essential for phage TP901-1 amplification. In addition, analyses of internal phage DNA replication showed that the ORF13 protein and the repeats are essential for phage TP901-1 DNA replication in vivo. These results show that orf13 encodes a replication protein and that the repeats within the gene are the origin of replication.     

The Plasmid Complement of Lactococcus lactis UC509.9 Encodes Multiple Bacteriophage Resistance Systems

Lactococcus lactis subsp. cremoris strains are used globally for the production of fermented dairy products, particularly hard cheeses. Believed to be of plant origin, L. lactis strains that are used as starter cultures have undergone extensive adaptation to the dairy environment, partially through the acquisition of extrachromosomal DNA in the form of plasmids that specify technologically important phenotypic traits. Here, we present a detailed analysis of the eight plasmids of L. lactis UC509.9, an Irish dairy starter strain. Key industrial phenotypes were mapped, and genes that are typically associated with lactococcal plasmids were identified. Four distinct, plasmid-borne bacteriophage resistance systems were identified, including two abortive infection systems, AbiB and AbiD1, thereby supporting the observed phage resistance of L. lactis UC509.9. AbiB escape mutants were generated for phage sk1, which were found to carry mutations in orf6, which encodes the major capsid protein of this phage.     

Analysis of the collar-whisker structure of temperate lactococcal bacteriophage TP901-1

Proteins homologous to the protein NPS (neck passage structure) are widespread among lactococcal phages. We investigated the hypothesis that NPS is involved in the infection of phage TP901-1 by analysis of an NPS- mutant. NPS was determined to form a collar-whisker complex but was shown to be nonessential for infection, phage assembly, and stability.     

Identification of the lower baseplate protein as the antireceptor of the temperate lactococcal bacteriophages TP901-1 and Tuc2009

The first step in the infection process of tailed phages is recognition and binding to the host receptor. This interaction is mediated by the phage antireceptor located in the distal tail structure. The temperate Lactococcus lactis phage TP901-1 belongs to the P335 species of the Siphoviridae family, which also includes the related phage Tuc2009. The distal tail structure of TP901-1 is well characterized and contains a double-disk baseplate and a central tail fiber. The structural tail proteins of TP901-1 and Tuc2009 are highly similar, but the phages have different host ranges and must therefore encode different antireceptors. In order to identify the antireceptors of TP901-1 and Tuc2009, a chimeric phage was generated in which the gene encoding the TP901-1 lower baseplate protein (bppL(TP901-1)) was exchanged with the analogous gene (orf53(2009)) of phage Tuc2009. The chimeric phage (TP901-1C) infected the Tuc2009 host strain efficiently and thus displayed an altered host range compared to TP901-1. Genomic analysis and sequencing verified that TP901-1C is a TP901-1 derivative containing the orf53(2009) gene in exchange for bppL(TP901-1); however, a new sequence in the late promoter region was also discovered. Protein analysis confirmed that TP901-1C contains ORF53(2009) and not the lower baseplate protein BppL(TP901-1), and it was concluded that BppL(TP901-1) and ORF53(2009) constitute antireceptor proteins of TP901-1 and Tuc2009, respectively. Electron micrographs revealed altered baseplate morphology of TP901-1C compared to that of the parental phage.     

High-Frequency Transformation, by Electroporation, of Lactococcus lactis subsp. cremoris Grown with Glycine in Osmotically Stabilized Media

An efficient method for genetic transformation of lactococci by electroporation is presented. Highly competent lactococci for electrotransformation were obtained by growing cells in media containing high concentrations of glycine and 0.5 M sucrose as the osmotic stabilizers. These cells could be stored at −85°C without loss of competence. With Lactococcus lactis subsp. cremoris BC101, a transformation frequency of 5.7 × 10⁷ transformants per μg of pIL253 DNA was obtained, which represents 5% of the surviving cells. All the lactococcal strains tested could be transformed by the present method.     

Structure and molecular assignment of lactococcal phage TP901-1 baseplate

P335 lactococcal phages infect the gram(+) bacterium Lactococcus lactis using a large multiprotein complex located at the distal part of the tail and termed baseplate (BP). The BP harbors the receptor-binding proteins (RBPs), which allow the specific recognition of saccharidic receptors localized on the host cell surface. We report here the electron microscopic structure of the phage TP901-1 wild-type BP as well as those of two mutants bppL (-) and bppU(-), lacking BppL (the RBPs) or both peripheral BP components (BppL and BppU), respectively. We also achieved an electron microscopic reconstruction of a partial BP complex, formed by BppU and BppL. This complex exhibits a tripod shape and is composed of nine BppLs and three BppUs. These structures, combined with light-scattering measurements, led us to propose that the TP901-1 BP harbors six tripods at its periphery, located around the central tube formed by ORF46 (Dit) hexamers, at its proximal end, and a ORF47 (Tal) trimer at its distal extremity. A total of 54 BppLs (18 RBPs) are thus available to mediate host anchoring with a large apparent avidity. TP901-1 BP exhibits an infection-ready conformation and differs strikingly from the lactococcal phage p2 BP, bearing only 6 RBPs, and which needs a conformational change to reach its activated state. The comparison of several Siphoviridae structures uncovers a close organization of their central BP core whereas striking differences occur at the periphery, leading to diverse mechanisms of host recognition.     

Structural characterization and assembly of the distal tail structure of the temperate lactococcal bacteriophage TP901-1

The tail structures of bacteriophages infecting gram-positive bacteria are largely unexplored, although the phage tail mediates the initial interaction with the host cell. The temperate Lactococcus lactis phage TP901-1 of the Siphoviridae family has a long noncontractile tail with a distal baseplate. In the present study, we investigated the distal tail structures and tail assembly of phage TP901-1 by introducing nonsense mutations into the late transcribed genes dit (orf46), tal(TP901-1) (orf47), bppU (orf48), bppL (orf49), and orf50. Transmission electron microscopy examination of mutant and wild-type TP901-1 phages showed that the baseplate consisted of two different disks and that a central tail fiber is protruding below the baseplate. Evaluation of the mutant tail morphologies with protein profiles and Western blots revealed that the upper and lower baseplate disks consist of the proteins BppU and BppL, respectively. Likewise, Dit and Tal(TP901-1) were shown to be structural tail proteins essential for tail formation, and Tal(TP901-1) was furthermore identified as the tail fiber protein by immunogold labeling experiments. Determination of infection efficiencies of the mutant phages showed that the baseplate is fundamental for host infection and the lower disk protein, BppL, is suggested to interact with the host receptor. In contrast, ORF50 was found to be nonessential for tail assembly and host infection. A model for TP901-1 tail assembly, in which the function of eight specific proteins is considered, is presented.