Real-time polymerase chain reaction assay for rapid and sensitive detection of anthrax spores in spiked soil and talcum powder

Real-time polymerase chain reaction (real-time PCR) is a laboratory technique based on PCR. This technique is able to detect sequence-specific PCR products as they accumulate in “real time” during the PCR amplification, and also to quantify the number of substrates present in the initial PCR mixture before amplification begins. In the present study, real-time PCR assay was employed for rapid and real-time detection of Bacillus anthracis spores spiked in 0.1 g of soil and talcum powder ranging from 5 to 10⁷ spores. DNA was isolated from spiked soil and talcum powder, using PBS containing 1 % Triton-X-100, followed by heat treatment. The isolated DNA was used as template for real-time PCR and PCR. Real-time PCR amplification was obtained in 60 min under the annealing condition at 60°C by employing primers targeting the pag gene of B. anthracis. In the present study, the detection limit of real-time PCR assay in soil was 10³ spores and10² spores in talcum powder, respectively, whereas PCR could detect 10⁴ spores in soil and 10³ spores in talcum powder, respectively.     

Loop-mediated isothermal amplification for rapid detection of <Emphasis Type="Italic">Bacillus anthracis</Emphasis> spores

A loop-mediated isothermal amplification (LAMP) assay system was employed for detecting Bacillus anthracis spores in pure cultures as well as in various simulated powder samples. The specificity of the designed LAMP primer sets was validated by assaying 13 B. anthracis strains and 33 non-B. anthracis species. The detection limits of the LAMP assay were 10 spores/tube for pure cultures and 100 spores/2 mg powder for simulated powder samples. The results show that the LAMP protocol is a promising method for detecting B. anthracis.     

A simple and sensitive method for detection of Bacillus anthracis by loop‐mediated isothermal amplification

Aims: To develop a rapid and simple system for detection of Bacillus anthracis using a loop‐mediated isothermal amplification (LAMP) method and determine the suitability of LAMP for rapid identification of B. anthracis infection. Methods and Results: A specific LAMP assay targeting unique gene sequences in the bacterial chromosome and two virulence plasmids, pXO1 and pXO2, was designed. With this assay, it was possible to detect more than 10 fg of bacterial DNA per reaction and obtain results within 30–40 min under isothermal conditions at 63°C. No cross‐reactivity was observed among Bacillus cereus group and other Bacillus species. Furthermore, in tests using blood specimens from mice inoculated intranasally with B. anthracis spores, the sensitivity of the LAMP assay following DNA extraction methods using a Qiagen DNeasy kit or boiling protocol was examined. Samples prepared by both methods showed almost equivalent sensitivities in LAMP assay. The detection limit was 3·6 CFU per test. Conclusions: The LAMP assay is a simple, rapid and sensitive method for detecting B. anthracis. Significance and Impact of the Study: The LAMP assay combined with boiling extraction could be used as a simple diagnostic method for identification of B. anthracis infection.     

Sensitive and Rapid Detection of Giardia lamblia Infection in Pet Dogs using Loop-Mediated Isothermal Amplification

Giardia lamblia is recognized as one of the most prevalent parasites in dogs. The present study aimed to establish a loop-mediated isothermal amplification (LAMP) assay for rapid and specific detection of G. lamblia from dogs. The fecal samples were collected and prepared for microscopic analysis, and then the genomic DNA was extracted directly from purified cysts. The concentration of DNA samples of G. lamblia were diluted by 10-fold serially ranging from 10^-1 to 10^-5 ng/µl for LAMP and PCR assays. The LAMP assay allows the amplification to be finished within 60 min under isothermal conditions of 63℃ by employing 6 oligonucleotide primers designed based on G. lamblia elongation factor 1 alpha (EF1α) gene sequence. Our tests showed that the specific amplification products were obtained only with G. lamblia, while no amplification products were detected with DNA of other related protozoans. Sensitivity evaluation indicated that the LAMP assay was sensitive 10 times more than PCR. It is concluded that LAMP is a rapid, highly sensitive and specific DNA amplification technique for detection of G. lamblia, which has implications for effective control and prevention of giardiasis.     

Rapid and simple DNA extraction method for the detection of enterotoxigenic Staphylococcus aureus directly from food samples: comparison of PCR and LAMP methods

Aims: The study describes the development of simple and rapid DNA extraction method in combination with loop‐mediated isothermal amplification (LAMP) to detect enterotoxigenic Staphylococcus aureus in food samples. Methods and Results: In this study, isolation of genomic DNA of enterotoxigenic Staph. aureus from spiked milk, milk burfi, khoa, sugarcane juice and boiled rice was carried out by boiling the isolated sample pellets for 10 min with 1% Triton X‐100. The isolated DNA was evaluated by polymerase chain reaction (PCR) and LAMP method. The LAMP was found to be 100 times more sensitive than PCR. The LAMP assay was very specific for Staph. aureus, and the presence of other contaminating bacterial DNAs and food matrix did not interfere or inhibit the LAMP assay. Conclusions: The template DNA extraction method developed in this study for food samples is simple, rapid and cost‐effective. LAMP was found to be less sensitive to matrix effect of food, compared to PCR. Significance and Impact of the Study: The method is suitable for direct detection of Staph. aureus without any enrichment in contaminated food samples and hence finds its application in food safety analysis, in permutation with LAMP.     

Development and validation of a real-time quantitative PCR assay for rapid identification of Bacillus anthracis in environmental samples

A real-time polymerase chain reaction (PCR) assay was developed for rapid identification of Bacillus anthracis in environmental samples. These samples often harbor Bacillus cereus bacteria closely related to B. anthracis, which may hinder its specific identification by resulting in false positive signals. The assay consists of two duplex real-time PCR: the first PCR allows amplification of a sequence specific of the B. cereus group (B. anthracis, B. cereus, Bacillus thuringiensis, Bacillus weihenstephanensis, Bacillus pseudomycoides, and Bacillus mycoides) within the phosphoenolpyruvate/sugar phosphotransferase system I gene and a B. anthracis specific single nucleotide polymorphism within the adenylosuccinate synthetase gene. The second real-time PCR assay targets the lethal factor gene from virulence plasmid pXO1 and the capsule synthesis gene from virulence plasmid pXO2. Specificity of the assay is enhanced by the use of minor groove binding probes and/or locked nucleic acids probes. The assay was validated on 304 bacterial strains including 37 B. anthracis, 67 B. cereus group, 54 strains of non-cereus group Bacillus, and 146 Gram-positive and Gram-negative bacteria strains. The assay was performed on various environmental samples spiked with B. anthracis or B. cereus spores. The assay allowed an accurate identification of B. anthracis in environmental samples. This study provides a rapid and reliable method for improving rapid identification of B. anthracis in field operational conditions.     

Loop‐mediated isothermal amplification for the rapid detection of Gardnerella vaginalis

The aim of this study was to develop a method for the rapid detection of Gardnerella vaginalis, which is proposed to play a key role in the pathogenesis of bacterial vaginosis. Specific loop‐mediated isothermal amplification (LAMP) primers were designed and used to detect target DNA within 45 min under isothermal conditions. Comparative screening indicated that the LAMP assay is superior to PCR in terms of rapidity, and is equivalent in sensitivity and specificity. This LAMP assay can be used for rapid screening and detection of G. vaginalis in vaginal samples; the limit of detection is 10 fg DNA.

     

Rapid detection of mecA and spa by the loop‐mediated isothermal amplification (LAMP) method

Aim: To develop a detection assay for staphylococcal mecA and spa by using loop‐mediated isothermal amplification (LAMP) method. Methods and Results: Staphylococcus aureus and other related species were subjected to the detection of mecA and spa by both PCR and LAMP methods. The LAMP successfully amplified the genes under isothermal conditions at 64°C within 60 min, and demonstrated identical results with the conventional PCR methods. The detection limits of the LAMP for mecA and spa, by gel electrophoresis, were 10² and 10 cells per tube, respectively. The naked‐eye inspections were possible with 10³ and 10 cells for detection of mecA and spa, respectively. The LAMP method was then applied to sputum and dental plaque samples. The LAMP and PCR demonstrated identical results for the plaque samples, although frequency in detection of mecA and spa by the LAMP was relatively lower for the sputum samples when compared to the PCR methods. Conclusion: Application of the LAMP enabled a rapid detection assay for mecA and spa. The assay may be applicable to clinical plaque samples. Significance and Impact of the Study: The LAMP offers an alternative detection assay for mecA and spa with a great advantage of the rapidity.     

The development of loop-mediated isothermal amplification combined with lateral flow dipstick for detection of Vibrio parahaemolyticus

Aims: The current study was aimed to develop a loop‐mediated isothermal amplification (LAMP) combined with amplicon detection by chromatographic lateral flow dipstick (LFD) assay for rapid and specific detection of Vibrio parahaemolyticus. Methods and Results: Biotinylated LAMP amplicons were produced by a set of four designed primers that recognized specifically the V. parahaemolyticus thermolabile haemolysin (tlh) gene followed by hybridization with an FITC‐labelled probe and LFD detection. The optimized time and temperature conditions for the LAMP assay were 90 min at 65°C. The LAMP–LFD method accurately identified 28 isolates of V. parahaemolyticus but did not detect 24 non‐parahaemolyticus Vibrio isolates and 35 non‐Vibrio bacterial isolates. The sensitivity of LAMP–LFD for V. parahaemolyticus detection in pure cultures was 120 CFU ml^?1. In the case of spiked shrimp samples without enrichment, the detection limit for V. parahaemolyticus was 1·8 × 10³ CFU g^?1 or equivalent to 3 CFU per reaction while that of conventional PCR was 30 CFU per reaction. Conclusions: The established LAMP–LFD assay targeting tlh gene was specific, rapid and sensitive for identification of V. parahaemolyticus. Significance and Impact of the Study: The developed LAMP–LFD assay provided a valuable tool for detection of V. parahaemolyticus and can be used effectively for identification of V. parahaemolyticus in contaminated food sample.     

Simple and rapid detection of Salmonella serovar Enteritidis under field conditions by loop‐mediated isothermal amplification

Aim: The objective of this study is to develop a serovar‐specific loop‐mediated isothermal amplification (LAMP) method for sensitive, rapid, and inexpensive detection of Salmonella serovar Enteritidis under field conditions. Methods: A set of six specific primers was designed with Salmonella Enteritidis DNA as the target. LAMP conditions were optimized by incubating the target DNA with the Bst DNA polymerase large fragment in a simple water bath. The sensitivity and specificity of LAMP was then compared with those of fluorescent quantitative real‐time polymerase chain reaction (FQ‐PCR). Results: The results were as follows. (1) Serovar‐specific Salmonella Enteritidis DNA was amplified at 65°C in as early as 20 min in a water bath. (2) A colour change visible to the naked eye indicated a positive amplification reaction. (3) The detection limit of the LAMP assay was 4 copies μl^?1; thus, the sensitivity and specificity of this assay is similar to those of the FQ‐PCR. Conclusions: LAMP is a high‐throughput detection technique with high sensitivity, specificity, and simplicity; these factors make it suitable for specifically detecting Salmonella Enteritidis under field conditions and in laboratory settings. Thus, LAMP eliminates the need for complicated equipment and technical training in the detection of this specific serovar. Significance and impact of the study: This is the first study involving the use of LAMP to detect Salmonella serovar‐specific DNA sequences. It is also the first to report an ideal method of distinguishing between Salmonella Enteritidis and other Salmonella under field conditions.     

Rapid and Sensitive Detection of Listeria ivanovii by Loop-Mediated Isothermal Amplification of the smcL Gene

A loop-mediated isothermal amplification (LAMP) assay for rapid and sensitive detection of the L. ivanovii strains had been developed and evaluated in this study. Oligonucleotide primers specific for L. ivanovii species were designed corresponding to smcL gene sequences. The primers set comprise six primers targeting eight regions on the species-specific gene smcL. The LAMP assay could be completed within 1 h at 64°C in a water bath. Amplification products were directly observed by the Loopamp Fluorescent Detection Reagent (FD) or detected by agarose gel electrophoresis. Moreover, the LAMP reactions were also detected by real-time measurement of turbidity. The exclusivity of 77 non-L. ivanovii and the inclusivity of 17 L. ivanovii were both 100% in the assay. Sensitivity of the LAMP assay was 250 fg DNA and 16 CFU per reaction for detection of L. ivanovii in pure cultures and simulated human stool. The LAMP assay was 10 and 100-fold more sensitive than quantitative PCR (qPCR) and conventional PCR assays,respectively. When applied to human stool samples spiked with low level (8 CFU/0.5 g) of L. ivanovii strains, the new LAMP assay described here achieved positive detection after 6 hours enrichment. In conclusion, the new LAMP assay in this study can be used as a valuable, rapid and sensitive detection tool for the detection of L. ivanovii in field, medical and veterinary laboratories.     

用环介导等温扩增技术快速检测粪便样本中的沙门菌

目的:建立快速检测粪便样本中的沙门菌的环介导等温扩增技术(LAMP),并着重在灵敏度和特异性方面对此方法进行评价。方法:利用LAMP针对沙门菌特定基因invA(靶基因)设计的6条特异引物,通过引物特异性识别特定基因invA上的8个独立区域来快速检测沙门菌;LAMP反应过程中会产生白色沉淀焦磷酸镁,故可以通过监测浊度来判定反应结果。结果:实时浊度仪监测反应结果表明,LAMP反应在60~65℃等温条件下50 min内完成;如果在反应前添加羟基萘酚兰,蓝色阳性结果很明显区别于紫色阴性结果;LAMP的最低检出限为6.97 pg/μL,PCR为69.7pg/μL,LAMP方法的检测灵敏度是PCR的10倍,且具有良好的特异性。结论:LAMP方法用于快速检测沙门菌,具有检测过程简单、实验装置简便、反应结果肉眼可辨、灵敏度高、特异性强的特点,对非沙门菌菌株的结果呈阴性,表明引物设计有很好的特异性。对粪便样本进行检测,发现具有同样的敏感性和特异性。这表明LAMP法是潜在的和有价值的在粪便样本中直接检测沙门菌的方法,具有快速、简便、低成本的特点。LAMP法适用于快速临床诊断。     

Development of A Loop-Mediated Isothermal Amplification (LAMP) for the Detection of F5 Fimbriae Gene in Enterotoxigenic Escherichia coli (ETEC)

The objective of this study was to establish a loop-mediated isothermal amplification (LAMP) method for the detection of F5 fimbriae gene in Enterotoxigenic Escherichia coli. A set of four primers were designed based on the conservative sequence of coding F5 fimbriae. Temperature and time condition, specificity test, and sensitivity test were performed with the DNA of Escherichia coli (F5+). The results showed that the optimal reaction condition for LAMP was achieved at 61 °C for 45 min in a water bath. Ladder-like products were produced with those F5-positive samples by LAMP, while no product was generated with other negative samples. The assay of LAMP had a detection limit equivalent to 72 cfu/tube, which was more sensitive than PCR (7.2 × 10² cfu/tube). The agreement rate between LAMP and PCR was 100 % in detecting simulation samples. Thus, the LAMP assay may be a new method for rapid detection of F5 fimbriae gene of ETEC.     

Sensitive and rapid identification of Vibrio vulnificus by loop-mediated isothermal amplification

Vibrio vulnificus is a serious bacterial pathogen for humans and aquatic animals. We developed a rapid, sensitive and specific identification method for V. vulnificus using loop-mediated isothermal amplification (LAMP) technique. A set of primers, composed of two outer primers and two inner primers, was designed based on the cytolysin gene sequence of V. vulnificus. The LAMP reaction was processed in a heat block at 65 °C for 60 min. The amplification products were detected by visual inspection using SYBR Green I, as well as by electrophoresis on agarose gels. Our results showed that the LAMP reaction was highly specific to V. vulnificus. This method was 10-fold more sensitive than conventional PCR. In conclusion, the LAMP assay was extremely rapid, simple, cost-effective, sensitive and specific for the rapid identification of V. vulnificus.     

Sensitive and rapid detection of Karenia mikimotoi (Dinophyceae) by loop-mediated isothermal amplification

A loop-mediated isothermal amplification (LAMP) assay was developed to detect the genomic DNA of Karenia mikimotoi using a set of four specific primers based on a ribosomal DNA internal transcribed spacer (ITS). The sensitivity of this LAMP assay was 100-fold higher than regular PCR, and its specificity was validated using other algae as a comparison. Two visual detection approaches were feasible to interpret the positive or negative results. This technology may have the potential to aid in forecasting red-tides on the scene because of its high sensitivity, specificity and rapid detection.     

Loop‐mediated isothermal amplification method for rapid detection of Vibrio alginolyticus,the causative agent of vibriosis in mariculture fish

Aims: The purpose of this study was to develop a loop‐mediated isothermal amplification (LAMP) method for the rapid, sensitive and simple detection of Vibrio alginolyticus in mariculture fish. Methods and Results: LAMP primers were designed by targeting the gyrB gene. With Bst DNA polymerase, the target DNA can be clearly amplified for 60 min at 64°C in a simple water bath. The detection sensitivity of the LAMP assay for the detection of V. alginolyticus is about 3·7 × 10² CFU ml^?1 (3·7 CFU per reaction). LAMP products could be judged with agar gel or naked eye after the addition of SYBR Green I. There were no cross‐reactions with other bacterial strains indicating a high specificity of the LAMP. The LAMP method was applied to detect V. alginolyticus‐infected fish tissues effectively. Conclusions: The LAMP established in this study is a simple, sensitive, specific, inexpensive and rapid protocol for the detection of V. alginolyticus. Significance and Impact of the Study: This LAMP method provides an important diagnostic tool for the detection of V. alginolyticus infection both in the laboratory and field.     

Development and Evaluation of a Novel and Rapid Detection Assay for Botrytis cinerea Based on Loop-Mediated Isothermal Amplification

Botrytis cinerea is a devastating plant pathogen that causes grey mould disease. In this study, we developed a visual detection method of B. cinerea based on the Bcos5 sequence using loop-mediated isothermal amplification (LAMP) with hydroxynaphthol blue dye (HNB). The LAMP reaction was optimal at 63°C for 45 min. When HNB was added prior to amplification, samples with B. cinerea DNA developed a characteristic sky blue color after the reaction but those without DNA or with DNA of other plant pathogenic fungi did not. Results of HNB staining method were reconfirmed when LAMP products were subjected to gel electrophoresis. The detection limit of this LAMP assay for B. cinerea was 10⁻³ ng µL⁻¹ of genomic DNA per reaction, which was 10-fold more sensitive than conventional PCR (10⁻² ng µL⁻¹). Detection of the LAMP assay for inoculum of B. cinerea was possible in the inoculated tomato and strawberry petals. In the 191 diseased samples, 180 (94.2%) were confirmed as positive by LAMP, 172 (90.1%) positive by the tissue separation, while 147 (77.0%) positive by PCR. Because the LAMP assay performed well in aspects of sensitivity, specificity, repeatability, reliability, and visibility, it is suitable for rapid detection of B. cinerea in infected plant materials prior to storage and during transportation, such as cut flowers, fruits and vegetables.